RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
Compressed Gases Fitter/Technician£28,000 negotiable plus benefitsStansted AirportMon - Friday (8:00 am to 4:30 pm Monday to Thursday and 4 pm finish on Friday)Our client, a leading aviation company based in Stansted, is currently looking to recruit a Gas Cylinder Technician. They provide comprehensive training, career progression opportunities, and a strong team culture.About the roleThis role involves the repair, testing, and overhaul of valve and cylinder assemblies, including hydrostatic testing and high-pressure charging up to 4500 PSI.Key responsibilities:• Strip down and rebuild valve assemblies• Inspect, clean, and replace defective components• Conduct hydrostatic testing per Department of Transport regulations• Charge completed assemblies up to 4500 PSI• Support the safety inflatable team when requiredWhat we're looking forExperience:• Proven background in gas cylinder fitting - at least 2 years experience• MRO experience is highly desirable• Ability to follow detailed compliance manuals (Essential)• Experience in the Avionics industryQualifications:• GCSE (or equivalent) in Maths and EnglishBenefits:• 25 days Annual Leave + Bank holidays• Early Finish on Friday• Free onsite parking• Life Assurance x4• Doubled pension contribution (3-6%)• Monthly Wellness Breakfast• Overtime available at 1.5/ 2 x normal rate• Are you experienced in MRO and gas cylinder fitting?....Read more...
Compressed Gases Fitter/Technician£28,000 negotiable plus benefitsStansted AirportMon - Friday (8:00 am to 4:30 pm Monday to Thursday and 4 pm finish on Friday)Our client, a leading aviation company based in Stansted, is currently looking to recruit a Gas Cylinder Technician. They provide comprehensive training, career progression opportunities, and a strong team culture.About the roleThis role involves the repair, testing, and overhaul of valve and cylinder assemblies, including hydrostatic testing and high-pressure charging up to 4500 PSI.Key responsibilities:• Strip down and rebuild valve assemblies• Inspect, clean, and replace defective components• Conduct hydrostatic testing per Department of Transport regulations• Charge completed assemblies up to 4500 PSI• Support the safety inflatable team when requiredWhat we're looking forExperience:• Proven background in gas cylinder fitting - at least 2 years experience• MRO experience is highly desirable• Ability to follow detailed compliance manuals (Essential)• Experience in the Avionics industryQualifications:• GCSE (or equivalent) in Maths and EnglishBenefits:• 25 days Annual Leave + Bank holidays• Early Finish on Friday• Free onsite parking• Life Assurance x4• Doubled pension contribution (3-6%)• Monthly Wellness Breakfast• Overtime available at 1.5/ 2 x normal rate• Are you experienced in MRO and gas cylinder fitting?....Read more...
Are you passionate about Human Factors, cockpit design, and military aviation? Join a cutting-edge team shaping the future of fighter jet technology as a Senior Human Factors Engineer.
Be part of a unique opportunity to influence fast jet cockpit design, support simulator development, and collaborate with pilots and stakeholders to deliver intuitive, effective Human-Machine Interfaces (HMI).
UK citizenship and eligibility for full security clearance required.
What Youll Be Doing:
- Analyse pilot use-cases and concepts of operation to guide cockpit design
- Apply Human Factors principles to enhance HMI design for the Typhoon fighter aircraft
- Collaborate with Avionics System teams, Test Pilots, Flight Test communities, and customers
- Contribute to requirement derivation and conceptual HMI solutions
- Participate in the development of immersive simulators and full-scale cockpit mock-ups
- Support flight testing of new cockpit equipment and designs
- Work on capabilities such as sensor integration, navigation, communications, weapons control, and defensive aids
- Conduct Human Error Analysis to support safety and airworthiness
- Define and evolve cockpit control schemes and visual symbology
- Produce technical documentation, support usability assessments, and assist with qualification and system clearances
What Youll Bring:
- A degree (or equivalent) in Human Factors, Psychology, or User-Centred Design
- Excellent written and verbal communication skills
- Confidence in presenting to varied stakeholders
- Experience deriving system requirements from high-level customer needs
- Ability to manage multiple concurrent tasks independently
Desirable Skills:
- Experience with usability testing, user assessments, and simulator-based trials
- Knowledge or background in the Military Air domain
- Familiarity with cockpit integration, HMI development, and fast jet systems
This Role Is Perfect For You If You:
- Are passionate about user-centred design and fast jets
- Want to experience operating fighter jet systems in immersive simulations
- Enjoy working in cross-functional teams to influence real-world defence technology
- Thrive in a fast-paced, high-impact engineering environment
Take the next step in your Human Factors career and help define the future of military aviation. Apply today and become a key part of a team delivering the next generation of fighter cockpit systems.....Read more...
Conduct NDT Inspection including Liquid Penetrant Inspection
Ensuring customer, EOM and national standards and requirements are observed
Achieve a recognised NDT qualification and be recognised as competent in the discipline of NDT within a period of three years from the commencement of the NDT apprenticeship
Achieve all goals, including completion of defined outcomes of the apprenticeship training provider
Maintaining analytical instruments, including calibration
Maintaining housekeeping within the NDT department
Maintain data and processing logs and records
Consider environmental responsibility in all actions
Comply with company health and safety procedures
Training:The apprenticeship programme is designed to gain skills and technical expertise to become a certified NDT Operator in one NDT Method. This includes health and safety training, 1-to-1 mentoring, seminars, practical work experience sessions, and on-the-job training.
The candidates will keep records of their learning and experience throughout the programme and create a project report. The project will then be presented at the end-point assessment.
On successful completion of the apprenticeship scheme, further maybe gained.
Qualifications include:
Internationally recognised certification in Level 2 Penetrant Testing
Non-Destructive Testing (NDT) Operator Level 2 Apprenticeship Standard
Training Outcome:Further NDTqualifications could be gained after the conclusion of the apprenticeship.Employer Description:Magnaghi UK Ltd operates within the following market sectors of the Aerospace industry – Aerostructures, Landing and Braking Gear, Aero Engines and Avionics. Magnaghi UK Ltd products and services support the major industry programs and we continue to develop new process streams for the next generation of aircraft.Working Hours :Monday - Friday 8am - 4pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Team working,Initiative,Good housekeeping,Enthusiastic....Read more...
As a Chelton Apprentice, you will benefit from a structured program over 36 months, combining on-the-job training with classroom based technical training modules.
You will engage in rotational assignments across different engineering departments, gaining exposure to diverse projects and skills.
Chelton will provide you with hands-on involvement in real-world projects, allowing you to apply theoretical knowledge to practical situations.
Start a career that will last a lifetime at Chelton.
Training:Qualifications included:
Engineering Manufacturing Technician Apprenticeship Standard. Company Training Plan & Assessment.
BTEC Level 4 Higher National Certificate in Engineering (1 day per week for 2 years at college).
Level 4 Diploma in Engineering and Advanced Manufacturing (Development Competence).
Level 2 Functional Skills - Maths (If required).
Level 2 Functional Skills - English (If required).
End Point Assessment at the end of the apprenticeship (Months 36 to 39).
Training Outcome:
Following successful completion of the Chelton Apprenticeship, you will be given opportunities for progression across various engineering roles.
This includes the chance to specialise in a chosen area of engineering based on personal interests and aptitudes.
Chelton will offer additional access to continued education and professional development programs, including sponsored higher education or specialised certifications to enhance skills and knowledge.
Employer Description:Chelton is a global leader in the design, development, manufacture and support of advanced aerospace and defence systems for platforms operating in the air, on land and at sea. With a portfolio spanning Antennas, Avionics and Land, we’ve been securing success in demanding environments since 1947 – one of the longest tenures in the aerospace and defence industry.
From aerospace and defence communications through to navigation and electronic warfare, everything we do is driven by the people behind the products. Our top-level talent combines ground breaking technical capabilities with a matched drive and persistence to offer our customers a competitive edge with exciting new technology.Working Hours :Plus 3 months (EPA).
5 days per week: 8:00 am to 4:30pm, Monday to Friday, with flexibility offerings, 37 hours per week.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience,Time Management,Interest in Engineering,Motivated....Read more...
