Position: Electrical Service Engineer (SAT/NAVCom)
Job ID: 2394/1
Location: Portsmouth
Rate/Salary: To Be Confirmed Upon Application
Type: Permanent / Full Time
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy, and Aerospace sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The job description below will outline this position of: Electrical Service Engineer (SAT/NAVCom)
Typically, this person will visit vessels predominantly in the UK (however, international travel will be open), servicing, maintaining, repairing, installing, and surveying NAVCom / SATCom / Bridge Navigation, VSAT, GMDSS and more.
HSB Technical’s client is a very established and well-regarded business entity.
Duties and responsibilities of the Electrical Service Engineer (SAT/NAVCom):
Visit vessels to either conduct, work on, repair, or install:
VDR-APTs
Radio Surveys
Installation, repair, and maintenance of GMDSS Equipment
Installation, repair, and maintenance of Navigation equipment
Installation, repair, and maintenance of VSAT Satellite Broadband
Working on Retrofit projects, completing whole bridge installs and large system integrations
Qualifications and requirements for the Electrical Service Engineer (SAT/NAVCom):
Good standard at a higher level HNC/ONC/NVQ Level or equivalent national standard education
Current Driving Licence
Able to pass marine/offshore worker medical examination
Valid Passport as international travel will be part of this role
3+ Years of Marine Service Engineer experience
In-depth knowledge of electronic/electrical engineering
GMDSS Radio Operator / Maintainer License preferred
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.....Read more...
The Power Electronics Engineer is responsible for power supply design and power electronics (power conversion, motor control and motor drive).
Skills
Power Supply Design Experience, ideally to Senior or Principal level
Strong lab experience in debugging complex power modules (hand-on experience)
Familiar with multiple power supply topologies (flyback, half bridge, full bridge,???)
Strong in experience in design for cost, manufacturability, testability and reliability
Experience in firmware development is a big plus (digitalization migration)
Role Responsibilities
Assist in identifying and organizing requirements for power electronics applications. Apply relevant usability procedures and principles. In charge of keeping the Product Maturity Tracker (requirement document) updated up to project closure.
Perform necessarily calculation/simulations to validate the design (efficiency calculation, identification of hot spot, estimation of temperature rise, EMC filter sizing, control loop bandwidth verification,???.)
Design magnetics with associated simulation. Magnetics needs to be outsourced using ???built to print??? manufacturing file methodology (to allow double sourcing)
Build prototypes, products and systems suitable for testing. Set up and run lab experiments. Design and implement tests, document results and develop customer presentations. Provide timely corrective actions on defects. Release test reports of all prototypes built using the standard Power CPE engineering test platform.
Help develop a power module building block library for high temperature applications. ....Read more...
The Power Electronics Engineer is responsible for power supply design and power electronics (power conversion, motor control and motor drive).
Skills
Power Supply Design Experience, ideally to Senior or Principal level
Strong lab experience in debugging complex power modules (hand-on experience)
Familiar with multiple power supply topologies (flyback, half bridge, full bridge,???)
Strong in experience in design for cost, manufacturability, testability and reliability
Experience in firmware development is a big plus (digitalization migration)
Role Responsibilities
Assist in identifying and organizing requirements for power electronics applications. Apply relevant usability procedures and principles. In charge of keeping the Product Maturity Tracker (requirement document) updated up to project closure.
Perform necessarily calculation/simulations to validate the design (efficiency calculation, identification of hot spot, estimation of temperature rise, EMC filter sizing, control loop bandwidth verification,???.)
Design magnetics with associated simulation. Magnetics needs to be outsourced using ???built to print??? manufacturing file methodology (to allow double sourcing)
Build prototypes, products and systems suitable for testing. Set up and run lab experiments. Design and implement tests, document results and develop customer presentations. Provide timely corrective actions on defects. Release test reports of all prototypes built using the standard Power CPE engineering test platform.
Help develop a power module building block library for high temperature applications. ....Read more...
Applications Engineer – RF Components
Location: Camberley, Surrey
An exciting opportunity has arisen for an Applications Engineer to join a global leader in RF, IF, and microwave components used across wireless, defence, medical, and satellite communications industries.
This role is ideal for a technically minded engineer with knowledge of RF components, who enjoys solving customer problems, providing support, and being a vital technical bridge between sales, customers, and engineering.
Main responsibilities of the Applications Engineer (based in Camberley):
Provide technical support to internal and external customers
Advise customers on product selection and optimal use
Identify and propose solutions to technical and commercial problems
Support RMA processes by reviewing and responding to return requests
Collaborate with field sales and internal sales teams on pricing and quotations
Maintain accurate records of all activities, including CRM and email tracking
Follow up on enquiries throughout the development and sales process
Offer general administrative support to the Field Sales Engineering team
Requirements of the Applications Engineer (based in Camberley):
Bachelor’s Degree in Electronic Engineering or related discipline
Knowledge of RF components and sub-systems
Proficiency in Microsoft Office tools (Word, Excel, PowerPoint)
Strong written and verbal communication skills in English
Well-presented, self-motivated, and a collaborative team player
This is a fantastic opportunity to join a renowned, high-performing team with a reputation for innovation and customer service. Full training will be provided on both the company’s technical product range and internal systems.
To apply for this Applications Engineer role (based in Camberley), please send your CV to:
Kchandarana@redlinegroup.com or call 01582 878 830 / 07961 158 784....Read more...
Location: Split between Amsterdam & UtrechtFull-Time | Immediate Start PreferredAn innovative and design-forward workspace operator with multiple boutique office locations in the Netherlands is seeking a Cluster Chief Engineer to oversee day-to-day technical operations across its expanding portfolio of hotels and workspaces.
The RoleThis position is ideal for someone who thrives in dynamic, guest-oriented environments, is service-minded, and enjoys variety in their day-to-day. You’ll act as a bridge between engineering, maintenance, and property operations, ensuring facilities remain well-maintained, efficient, and in line with sustainability goals.You’ll split your time between sites in Amsterdam and Utrecht, with full autonomy over scheduling and priorities.
Key Responsibilities
Lead and coordinate technical operations and property maintenance across the locations.Oversee and support a small but capable team of 6, including general maintenance staff, painters, and technical contractors.Liaise with external partners who manage building systems and installations (M&E).Contribute to sustainability and efficiency initiatives, supporting the company’s operational goals.Coordinate with ownership and leadership on property development and strategic planning.Provide hands-on support when necessary and maintain strong relationships with tenants and guests.
About You
You have previous experience in building operations, technical services, or property management, ideally in a hospitality, creative, or boutique office environment.You’ve worked in smaller, agile companies rather than large corporates.You're social, guest-focused, and take pride in creating welcoming spaces.You’re organised, proactive, and hands-on – happy to roll up your sleeves when needed.Willingness to travel between sites daily (Amsterdam ↔ Utrecht) – a company car is provided for both business and private use.Experience managing a team and third-party contractors is a plus.
What’s On Offer
A key role in a growing and evolving business with real influence and independence.Room to grow into broader property and asset management responsibilities as the company expands.A work culture that values authenticity, flexibility, and initiative.
How to applyFor further details, apply today or send your CV to clay@corecruitment.com.Due to the volume of applications, we may not be able to provide feedback to all applicants. If you haven't heard from us within 2 weeks, please consider your application unsuccessful. Nevertheless, feel free to reach out!
http://www.corecruitment.com/https://www.facebook.com/COREcruitmentDOTcom/Tweet us @COREcruitment
....Read more...
We are seeking a motivated Reliability Engineer to play a pivotal role in advancing the reliability and resilience of our uncrewed surface vessels (USVs).
This is an excellent opportunity for a driven individual looking to advance their career within the evolving Geo-data industry.
This position is instrumental in transforming how we identify, understand, and address technical failures, ultimately driving improvements in asset performance and operational excellence.
In this role, you will collaborate with cross-functional teams across global regions. You will lead in-depth technical investigations into system failures and anomalies, providing insights that directly influence design enhancements, product development strategies, and long-term fleet performance. Your work will uncover root causes of complex issues and drive systemic improvements that enhance safety, reliability, and asset longevity.
You will engage closely with internal stakeholders across engineering, operations, quality management, and data analytics to lead and facilitate investigations into reliability-related challenges. Your ability to translate data into actionable insights will be key to supporting continuous improvement across our operations.
This is a full-time staff position based in Bridge of Don, Aberdeen, operating under a hybrid working model (3 days in-office, 2 days remote).
At Fugro, every role contributes to the success, safety, and growth of our business and our people. As a Reliability Engineer, your commitment to data excellence and technical leadership will be vital in upholding these values.
Your role and responsibilities:
Lead/co-ordinate in structured root cause analyses to investigate technical failures, identify systemic issues and develop corrective actions that enhance the useability, safety and long-term reliability of the USVs.
Investigate procedural and documentation-related contributors to failures, identifying gaps in technical instructions, maintenance procedures, or system documentation, and provide clearrecommendations that support updates to controlled documents and continuous improvement efforts
Identify and communicate opportunities for USV design improvements to the product management teams with a view to advise and assist in the implementation of these via feedback loop with design teams for both existing assets and new-build vessels
Develop and distribute reports and technical memos to stakeholders outlining findings from technical investigations.
What you’ll need to thrive in this role:
Hold Bachelor or equivalent in electro-mechanical, electrical, mechanical or similar
Strong understanding of electrical/mechanical subsystems such as propulsion, steering, hull structures, and mechanical linkages.
Experience diagnosing failures related to wear, fatigue, corrosion, and mechanical misalignment in marine environments
Skilled in interpreting and analysing electrical/mechanical drawings, assembly schematics,and component specifications
Familiarity with marine classification standards and reliability practices formechanical and electrical systems (e.g., ISO 16315, DNV GL rules).
Able to assess the impact of electrical/mechanical design decisions on system reliability and maintainability. Comfortable working with field data, maintenance logs, and inspectionreports to identify recurring mechanical issues and degradation patterns.
About Us
Who we are Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.
What we offer
Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team.
Our view on diversity, equity and inclusion
At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together we create a safe and liveable world’ – and to each other.
Benefits of joining our team
Extensive career & training opportunities both nationally and internationally.
Competitive salary
Contributory pension scheme
Flexible working hours and the potential to work 2 days a week from home in accordance with your manager and corporate policies
Private medical insurance
Health cash plan
Group life assurance
Group income protection
Electric car scheme
Cycle to work scheme
Discounted gym membership
Discounts platform
The Fugro Card (pre-paid virtual visa card, which earns cash back automatically when money is spent at any participating retailers)
Enhanced maternity and paternity pay
Long service awards
Fugro values awards
Employee referral bonus scheme
Disclaimer for recruitment agencies:
Fugro does not accept any unsolicited applications from recruitment agencies. Acquisition to Fugro Recruitment or any Fugro employee is not appreciated
Apply for this ad Online!....Read more...
Technical Sales Manager Location: Abingdon, Oxfordshire (options for office based, hybrid or remote) Salary: Up to £60,000 per annum (plus commission), negotiable dependant on experience Commission:1% on new orders from existing customers2% on orders from brand new customers About the Role We are seeking a commercially astute Technical Sales Manager with a strong background in precision engineering and CNC machining to drive new business and support the growth of existing accounts. This is a client-facing role that combines technical expertise, relationship building, estimating/quoting, and project coordination. You will play a pivotal role in identifying opportunities, converting leads into orders, and acting as the bridge between the customer and the shop floor. Working as part of a well-established precision engineering company, the successful candidate will join a business known for delivering high-precision components for sectors such as aerospace, automotive, medical, motorsport, energy, and general engineering. Key Responsibilities Sales & Business Development:Develop and implement a strategic sales plan focused on key industry sectors.Identify and approach new prospects through research, networking, trade shows, and referrals.Visit customer sites across the UK (and occasionally internationally) to understand technical needs, build relationships, and present the company’s capabilities.Prepare and deliver professional, technically informed presentations to engineering managers, buyers, and directors.Negotiate pricing, lead times, and commercial terms in line with company targets.Maintain strong long-term relationships with existing customers and ensure repeat business. Technical Estimating & Quoting:Interpret engineering drawings and specifications to produce accurate estimates and quotations.Liaise with the production, engineering, and programming teams to assess machining methods, cycle times, materials, and capacity.Use internal costing systems or spreadsheets to calculate prices that reflect true manufacturing costs and margins.Provide clear and detailed proposals to customers, ensuring all technical and commercial elements are covered.Follow up on quotes and negotiate with customers to secure orders. Account Management & Project Coordination:Oversee projects from order placement through to delivery, ensuring customer requirements are met.Act as the main point of contact for customers throughout the production process.Provide regular updates and resolve any technical or commercial issues that may arise.Monitor customer satisfaction and identify opportunities for upselling or cross-selling. Travel & External Engagement:Regular travel to customer sites (2–3 days per week depending on project volume).Attend relevant industry exhibitions, conferences, and customer meetings.Represent the company with professionalism and a high level of technical credibility. Ideal Candidate Profile:Proven success in technical sales, ideally within a precision engineering or CNC machining environment.Ability to read and interpret technical drawings and understand machining tolerances, materials, and manufacturing processes.Experience preparing quotes and estimates based on production input.Strong commercial awareness and negotiation skills.Self-starter with a results-driven mentality and the ability to manage their own diary.Excellent communication, presentation, and customer relationship skills.Comfortable with regular UK travel and occasional overnight stays.Ideally educated to HNC/HND or Degree level in Mechanical Engineering (or equivalent experience). What's On Offer:Base salary: Up to £60,000 per annum (plus commission), negotiable dependant on experienceAttractive commission structure:1% on all new orders from existing customers2% on all orders from brand new customersOffice based, hybrid or fully remote options availableAutonomy to manage the full sales cycle, from enquiry through to deliveryOpportunity to work with a modern, well-equipped precision engineering facilityA collaborative and experienced team with engineering and CNC expertiseCompany vehicle or mileage allowancePension and holiday entitlement This role would suit… An ambitious and technically minded Technical Sales Engineer ready to take the next step into a more strategic and managerial position, or an experienced Technical Sales Manager looking to join a reputable precision engineering business with real autonomy and earning potential. It’s a great opportunity for someone with a solid understanding of CNC machining and engineered components who thrives on customer interaction, technical problem-solving, and closing complex deals. If you’re looking for a role where you can genuinely influence business growth and be rewarded for your results – this could be the perfect fit.Bolt-On Personnel and our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel.....Read more...
