Our 4 Year Apprenticeship Programme will see you develop both technically and personally. Gaining hands-on experience using tools & machinery while developing skills for a rewarding career in engineering & manufacturing, with the majority of your first year spent at SETA training centre in Southampton completing some of the following training:
Foundational knowledge units including General Safety and Statutory Requirements Specialist Welding & Fabrication training including:
MMA Welding
MIG, MAG and Fluxed Cored Arc Welding
TIG Welding
Sheet Metal Work
1 Day a week will be dedicated to the delivery of a BTEC Level 3 in Advanced Manufacturing Engineering
Once you’re equipped with your foundation knowledge, you’ll join our friendly team on-site for Year 2 and 3 where you’ll work alongside our teams and start gaining valuable hands-on experience and training to further your understanding and start applying what you’ve learnt. You’ll be assigned a mentor, who will oversee your development and training. Training:Our Apprentices will undertake a Metal Fabricator, Level 3 (A level) Apprenticeship Standard. This will include a full-time period of practical workshop based ‘off-the-job’ training at SETA in Southampton.
You will also begin a technical certificate (depending on your prior attainments) where you will be required to attend SETA one day a week over two academic years. After your initial training at SETA, you will be with your employer working on developing your skills in relation to your job role. And will be working towards your End Point Assessment.Training Outcome:Upon successful completion of the Level 3 Metal Fabricator apprenticeship, the candidate will have the opportunity to progress into a more senior role, taking full responsibility for fabricating products independently. With proven leadership and consistent results, further career paths such as estimating, design, or management may be explored based on individual strengths. As the company expands over the next few years with a new factory, advanced equipment, and ongoing employee upskilling, numerous opportunities for growth will be available. Employer Description:At Precision Fabrications Andover, we provide high-performance sheet metal fabrication, combining state-of-the-art technology, expert craftsmanship, and industry-leading precision to meet the most demanding project requirements.
Our advanced facility is fully equipped to handle complex fabrication challenges with unrivalled accuracy and efficiency, offering:
✅ Comprehensive In-House Capabilities:
🔹 Laser Cutting & Punch Press – High-speed, precision cutting for intricate and large-scale projects
🔹 Press Brakes & CNC Machining – Superior forming and machining for exceptional detail and consistency
🔹 TIG & MIG Welding – Professional-grade welding for durability, strength, and reliability
✅ Premium Finishing & Coating Services:
🔹 Galvanized Coatings – Enhanced corrosion protection
🔹 Anodising – Superior wear resistance and aesthetic appeal
🔹 Wet Spray & Powder Coating – Long-lasting, high-quality finishes
✅ Certified Quality & Compliance:
🔹 ISO 9001:2015 Certified – Rigorous quality management and continuous improvement
🔹 BS EN 1090 Execution Class 2 – Structural elements up to 15 floors
🔹 ISO 14001 Certified – Commitment to environmentally responsible manufacturing
✅ Diverse Material Capabilities:
We fabricate with a wide range of metals, handling maximum thicknesses of:
🔹 Mild Steel – 25mm
🔹 Stainless Steel – 20mm
🔹 Aluminium – 16mm
🔹 Brass – 10mm
🔹 Copper – 8mm
✅ Advanced 3D CAD Design & Engineering:
• Our experienced CAD design specialists optimize projects for maximum precision, efficiency, and performance, ensuring flawless execution from concept to completionWorking Hours :7am to 4pm Monday to Thursday
7am to 1pm Friday.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Mechanical Aptitude....Read more...
An exciting opportunity has arisen for a Junior Architectural Technician to join a well-established architectural firm, offering excellent benefits and a competitive salary.
As a Junior Architectural Technician, you will be representing our client on-site with a national retail partner, acting on their behalf and developing detailed plans following site visits and assessments.
They are urgently looking for Junior or Graduate level candidates.
What we are looking for:
* Previously worked as a Junior Architectural Technician, Junior Architectural Technologist, Graduate Architectural Technologist, Graduate Architectural Technician or in a similar role.
* Experience using CAD software.
* Revit skills would be desirable, training available
* Valid UK driving license.
* Must reside nearby the job location.
Whats on offer:
* Competitive salary
* Access to pool car
Apply now for this exceptional Junior Architectural Technologist opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Offline CNC Miller
Offline CNC Miller Salary: £45-50k
The Company
A well-established engineering firm in Birmingham is seeking skilled professionals to join their dynamic team. With over 30 years of experience, this company specializes in designing and manufacturing bespoke equipment for various industries. They pride themselves on delivering innovative solutions to complex packaging and handling challenges for leading global clients. The company offers a collaborative work environment, utilising advanced CAD/CAM software and high-capacity CNC machinery to produce precision-engineered components. This is an excellent opportunity for a skilled Offline CNC Miller to contribute to a company committed to excellence and continuous improvement in the engineering sector.
Offline CNC Miller Duties:
- Comfortable programming offline using Fusion 360 or similar offline software.
- More than 3 years experience on CNC Mills.
- Experience on CNC lathes is a bonus but training can be given for the right candidate.
- Able to remain hands-on, setting & operating the machine while programming offline.
- Work from technical drawings.
Offline CNC Miller Requirements:
- Able to work to tolerance of 0.1mm+
- Possess a strong work-ethic and passion for your work.
- Enjoy problem solving and looking at improving processes where needed.
- Well-versed in Offline Programming from scratch.
- Have used Fusion 360, Mastercam, OneCNC or similar software.
Offline CNC Miller Salary & Benefits:
- £45-50k
- Holiday
- Private pension
- Private medical care
- Day off for your birthday
- Free financial advice
How to Apply for the Offline CNC Miller Position
Apply now or call/message Hayden at Holt Engineering on 07955 081 482 for more information on the Offline CNC Miller role.....Read more...
Senior Power Electronics Engineer – Battery Chargers
Are you a Senior Power Electronics Engineer with strong experience in high-power design, looking to work on innovative battery charging systems?
Our client, a global leader in green energy tech, is expanding their specialist R&D team in Glasgow, Scotland. This is a hybrid role with a clear path to senior level and the chance to shape next-gen power solutions across sectors like robotics, defence, and industrial systems.
Key Responsibilities for this Senior Power Electronics Engineer job are:
Design and develop single/three-phase high-power battery chargers for industrial use.
AC to DC power conversion for smart energy and automation systems.
Work with semiconductors, magnetics, and control theory to create efficient, robust design.
Use lab tools (oscilloscopes, dataloggers, CAD, MRP) for prototyping and testing.
Requirements for this Senior Power Electronics Engineer job are:
Senior level experience in power electronics design and control.
Expertise in LLC, phase-shift converters, active PFC, and high-power topologies.
Hands-on lab and simulation experience.
Industry background in defence, data centres, rail, or traction is a plus.
Degree in Electrical/Electronic Engineering or similar.
To apply for this Senior Power Electronics Engineer role, please send your CV to NDrain@redlinegroup.Com or call 01582 878828 / 07487 756328.....Read more...
Learn to use Autocad software for designs
Learn to use Revit software for designs
Learn how to use Navisworks
Creating and editing models using Autocad/Revit
Using Microsoft packages
Collaborating with Architects and Structural Engineers
Supporting BIM Manager and wider BIM Team
Updating models based on feedback
Organisation and maintenace of engineering documents such as designs, models and simulations
Training:The training will take place on a day release basis (1 day per week) at Hartlepool College.Training Outcome:It is expected that the successful candidate will progress within CAD21, progressing to a more senior role and receive professional recognition upon completion. Employer Description:EN:Able Futures, award-winning Shared/Flexi Job apprenticeship service will support you through your apprenticeship journey and professional development. We employ our apprentices directly and are listed on the Flexi Job Apprenticeship Register. We work with hosts in Yorkshire and the North East to provide apprentices in the construction and civil engineering industry.Working Hours :Monday - Friday, 8.30am - 5.00pm (1 hour unpaid lunch break).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience,Ability to use CAD Software,Interest in Construction,Interest in Engineering....Read more...
An exciting opportunity has arisen for a Junior Architectural Technician to join a well-established architectural firm, offering excellent benefits and a competitive salary.
As a Junior Architectural Technician, you will be representing our client on-site with a national retail partner, acting on their behalf and developing detailed plans following site visits and assessments.
They are urgently looking for Junior or Graduate level candidates.
What we are looking for:
? Previously worked as a Junior Architectural Technician, Junior Architectural Technologist, Graduate Architectural Technologist, Graduate Architectural Technician or in a similar role.
? Experience using CAD software.
? Revit skills would be desirable, training available
? Valid UK driving license.
? Must reside nearby the job location.
Whats on offer:
? Competitive salary
? Access to pool car
Apply now for this exceptional Junior Architectural Technologist opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Development Designer to join a well-established design company. This role offers excellent benefits and a salary up to £45,000.
As a Development Designer, you'll manage retail display projects from brief to production, with focus on POS and fixture development, and new product development.
You will be responsible for:
? Developing creative and technical solutions for retail POS displays, fixtures, and fittings from concept to prototype stage.
? Producing detailed technical drawings, 3D models, and prototypes for approval.
? Collaborating with multidisciplinary teams to ensure feasibility, quality, and cost-effectiveness.
? Refining and adapting designs based on feedback and aligning with client specifications.
? Preparing comprehensive documentation for a smooth transition to production.
? Researching materials and market trends to ensure sustainable, durable, and on-trend designs.
? Overseeing prototype development, testing, and refinement, while coordinating with suppliers for materials and fabrication to ensure practicality and manufacturability.
What we are looking for:
? Previously worked as a Development Designer, Industrial Designer, Product Designer, Store Designer, Technical Designeror in a similar role.
? Experience in development design for retail POS, fixtures, or fittings.
? Background working with prototyping, model-making, and material testing.
? Strong understanding of manufacturing processes, materials, and production techniques relevant to retail environments.
? Skilled with CAD software such as SolidWorks, AutoCAD, or similar 3D modelling tools.
? Capability to interpret briefs and translate concepts into technical drawings and working prototypes.
What's on offer:
? Competitive salary
? Engaging and collaborative working environment
? Involvement in ground-breaking retail design projects
? Opportunities for professional growth and development
Apply now for this....Read more...
An exciting opportunity has arisen for a Graduate Architectural Technician to join a well-established architectural firm, offering excellent benefits and a competitive salary.
As a Graduate Architectural Technician, you will be representing our client on-site with a national retail partner, acting on their behalf and developing detailed plans following site visits and assessments. Candidate must hold a current UK driving licence.
They are urgently looking for Junior or Graduate level candidates.
What we are looking for:
* Previously worked as a Junior Architectural Technician, Junior Architectural Technologist, Graduate Architectural Technologist, Graduate Architectural Technician or in a similar role.
* Experience using CAD software.
* Revit skills would be desirable, training available
* Valid UK driving license.
* Must reside nearby the job location.
Whats on offer:
* Competitive salary
* Access to pool car
Apply now for this exceptional Junior Architectural Technologist opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
You will be based at our office in Beverley, where you will work with our team of engineers and transport planners in the development of traffic and highway engineering design solutions. The position will also involve some outside work to undertake site visits and inspections.
Main duties will include:
Computer aided design (CAD) drafting
Highway geometric and pavement design
Vehicle swept paths
Data analysis
Traffic signing
Road safety
Traffic signals and active travel facility design
Training:
Hull College will deliver the Level 3 Civil Engineering Technician Apprenticeship Standard
How the training will be delivered is to be confirmed
Training Outcome:
Upon completion of the course, there is a potential to progress onto an appropriate level 4 qualification and continued full-time employment with Local Transport Projects
Employer Description:Local Transport Projects specialise in transport planning and traffic engineering, working for a wide range of commercial and public sector clients throughout the UK and Ireland.
We were founded in November 2004 from small beginnings and have grown from strength to strength. We now have 18 employees with a wide range of skills, and are based in modern offices in the Flemingate Centre in Beverley. The Company fosters a positive flexible working environment for all.Working Hours :Monday - Friday, core hours 9.00am - 5.00pmSkills: Attention to detail,enthusiasm,good communication,IT Skills,Self-motivated....Read more...
An exciting opportunity has arisen for a Graduate Architectural Technician to join a well-established architectural firm, offering excellent benefits and a competitive salary.
As a Graduate Architectural Technician, you will be representing our client on-site with a national retail partner, acting on their behalf and developing detailed plans following site visits and assessments. Candidate must hold a current UK driving licence.
They are urgently looking for Junior or Graduate level candidates.
What we are looking for:
? Previously worked as a Junior Architectural Technician, Junior Architectural Technologist, Graduate Architectural Technologist, Graduate Architectural Technician or in a similar role.
? Experience using CAD software.
? Revit skills would be desirable, training available
? Valid UK driving license.
? Must reside nearby the job location.
Whats on offer:
? Competitive salary
? Access to pool car
Apply now for this exceptional Junior Architectural Technologist opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An opportunity has arisen for a Project Mechanical Engineer to join a well-established engineering company specialising in the re-engineering, repair, and manufacture of components for rotating equipment. This full-time role offers a salary range of £40,000 - £45,000 and benefits.
As a Project Mechanical Engineer, you will be overseeing projects involving the assessment, overhaul, and refurbishment of rotating equipment.
You will be responsible for:
? Assessing rotating equipment received for inspection and repair
? Managing end-to-end refurbishment and overhaul projects
? Producing detailed work instructions to support efficient project delivery
? Maintaining and updating project materials and documentation in the internal job system
? Preparing final reports for client delivery and internal records
? Supporting and promoting quality, environmental, and health & safety standards
? Contributing to ongoing improvements in processes and engineering standards
What we are looking for:
? Previously worked as a Project Engineer, Mechanical Engineer, Service Engineer or in a similar role.
? Degree in mechanical engineering or related discipline
? Having 2 year experience of servicing rotating equipment is preferable
? Familiarity with CAD software is preferable
? Proficient IT skills
Shift:
? Monday - Thursday: 07.45 - 16.15
? Friday: 07.45 - 12.45
What's on offer:
? Competitive salary
? 37-hour working week
? Annual salary reviews and performance-related incentives
? Company pension scheme
? 25 days' holiday plus bank holidays
? Annual bonus linked to company performance
? Healthcare plan and death-in-service cover
This is a fantastic opportunity for a Project Engineer to join a forward-thinking engineering firm and grow your project engineering career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be ac....Read more...
Position: EC&I Engineer (Subsea Equipment)
Job ID: 264/24
Location: Newcastle
Rate/Salary: £45,000 to £60,000 DOE
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: EC&I Engineer (Subsea Equipment)
Typically, this person will be responsible for designing and developing offshore and subsea equipment, participating in every phase of the project life cycle. Their involvement spans from understanding client requirements through design, development, installation, testing, customer acceptance, documentation, training, and occasionally providing post-sales support. Additionally, they offer support to other business functions, including Sales, Project Management, Procurement, Production, Commissioning, and Documentation.
HSB Technical’s client is a very established and well-regarded business entity.
Duties and responsibilities of the EC&I Engineer:
Design of offshore and subsea equipment
Design of distributed control systems (PLC, SCADA)
Design of network and communications systems including RS485, MODBUS and Ethernet protocols
Design of low voltage and extra low voltage control circuits
Measurement systems & instrumentation
Selection and integration of subsea surveillance, vision and lighting systems
Using CAD to design and produce top level system diagrams, interconnecting wiring drawings, and detailed electrical, control & instrumentation schematics
Qualifications and requirement for the EC&I Engineer:
Degree in Electrical Engineering or similar
Practical experience/background in the subsea industry
Experience of machine control systems / automation
Autodesk AutoCAD
Autodesk Inventor
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.....Read more...
I am currently seeking a Draughtsman / Draughtsperson for work involving steel work and architectural metal work around Basildon (Essex). This role is open to contract or a permanent position for the right candidate.
This role would include but not be limited to the below
Prepare detailed and accurate technical drawings for steel and architectural metal work, including structural components, frames, and fixtures.
Collaborate with engineers and architects to understand project requirements and design specifications.
Produce 2D and 3D models
Ensure that all drawings are compliant with relevant codes, standards, and regulations.
Conduct site visits to gather measurements and assess project requirements.
Modify and revise designs based on feedback from clients, engineers, or project managers.
Prepare fabrication and assembly instructions for manufacturing teams.
Assist in the preparation of project documentation, including specifications and material lists.
The Ideal Candidate will have
Experience as a draughtsman / draughtsperson or similar
Previous experience with steel work and Architectural metal work or similar
Proficiency in CAD software and other relevant design tools.
Strong understanding of engineering principles, materials, and construction methods.
If you are keen, apply now or for more information contact Sam Jaffe at Cavendish.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief....Read more...
Adhere to the Integrated Management System
Develop skills in CAD tools under supervision, producing General Arrangement (GA) drawings, sketches, manufacturing, and installation drawings for light gauge steel elements.
Perform structural engineering calculations for load-bearing and non-load-bearing light gauge steel frames, associated hot-rolled members, and composite floor slabs.
Deliver excellent project work within agreed deadlines and budget
Keep management informed of important and relevant design decisions to make sure that the objectives of the company and the client are achieved.
Assist the design and detailing team with daily tasks, including updating internal filing systems and maintaining up-to-date design information
Training:
2 ½ Year Engineering Design Technician (Level 3) Apprenticeship Programme.
Design and Draughting Skills, Knowledge & Behaviours – delivered in the workplace.
Level 3 BTEC in Construction and the Built Environment – Day Release or Remote Delivery.
Specialist Training Programme Blocks of your choice.
End Point Assessment – Knowledge Test, Practical Test and Presentation/Interview.
Training Outcome:Possible progression onto Structural Engineer.Employer Description:At Etex, our purpose is to inspire new ways of living. We are an international leader in sustainable construction, driven by a passion for excellence, but it's our people that are our top priority. We connect, collaborate, and champion the well-being of our employees, forming partnerships and pioneering change in our ever-evolving industry.Working Hours :Monday to Friday between 8:30am – 5pm.Skills: Attention to detail,Problem solving skills,Number skills,Analytical skills,Team working....Read more...
Produce tender information - assist with preparation of specifications, equipment schedules, drawings, and other information for tender packages
Full electrical/mechanical design - assisting with electrical/mechanical design works and integration with coordination of services• Design calculations - produce design calculations and completing analysis both manually and with the aid of software packages
Deadlines - manage internal and external deadlines to ensure information is delivered on time
Liaise with technicians - ensure CAD/BIM team are aware of deadlines and have information they require in order to produce drawings/models
Assist Principal Engineers - assist principal engineers when required and provide electrical/mechanical design support
Utilities - applying for and managing statutory application process
Training:You will be provided with structured, in house, training and attend an online learning session one day a week.Training Outcome:The applicant will work in a successful engineering practice, with a track record of training from apprentice level through to senior engineers / management level. You will be mentored by a strong team of senior engineers and report to a nominated training officer.Employer Description:TACE, part of the Contollo Group, is a specialist building-services consulting-engineering practice which serves the public and private sectors with a focus on education, sports facilities, and multi-unit accommodation. A long-standing reputation for high-quality design services and expertise in low and net zero carbon solutions, helping our Client’s achieve their Net Zero ambitions.Working Hours :Monday - Thursday, 08:30 to 17:00.
Friday, 08:30 to 14:30.Skills: Communication skills,IT skills,Attention to detail,Team working....Read more...
Assist in creating 2D and 3D drawings using AutoCAD and other design software
Update and modify existing CAD drawings as instructed by senior designers or engineers
Interpret technical drawings and specifications
Ensure drawing accuracy and compliance with project and industry standards
Collaborate with engineers and project managers to understand design requirements
Maintain an organised library of drawings and design files
Training:Training will take place in the form of in-house mentoring alongside an external training provider.
The training provider will be agreed upon successful employment. Training Outcome:A full-time permanent position will be offered after completion of the apprenticeship. Further training will also be offered. Employer Description:Sirius Remediation Ltd is a valued part of the Sirius Engineering Group and proudly upholds its status as an employee-owned company.
Our commitment to maintaining the highest standards in health, safety, and environmental performance is unwavering.
Our team of skilled professionals collaborates closely with clients, regulators, and stakeholders to ensure compliance with pertinent legislation and to achieve sustainable, long-term outcomes.
We place great importance on our employees and invest in their continuous development, fostering a culture of innovation and excellence.
Our commitment to building strong relationships and delivering exceptional service has established us as a trusted partner in the remediation industry.Working Hours :Monday to Friday 9 am to 5 pm with 1 hour unpaid for lunch each day.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Team working,Initiative....Read more...
The main duties for this role include:
Production of Auto CAD drawings
Production of REVIT drawings
Undertake site surveys
Attend Design Team meetings
Attend Project meetings
Operate Engineering Design Systems
Production of computer models
Training:The successful candidates will be enrolled on the ‘Building Services Engineering’ course at the London South Bank University. The course will take place one day per week at the campus (with four days spent within the company office) and will earn the candidate a B.Eng (Hons) degree. Further information relating to the course can be found at https://www.lsbu.ac.uk/study/course-finder/beng-hons-building-services-engineeringTraining Outcome:Upon completion of the apprenticeship, you will be offered a 5 year working contract with ECS Consultants Limited as Mechanical and Electrical Design Engineer.Employer Description:Based in Cheadle since 1998, ECS Consultants Limited have built an unparalleled reputation for quality of service in the provision of innovative, workable, solutions with a strong emphasis on sustainable engineering. ECS have an enviable client base, working in all industry sectors and it is our approach to quality delivery which has underpinned our expansion.Working Hours :Four days per week in the ECS office with working hours Monday to Thursday 8.00am-5.00pm with 30 minute lunch and Friday, 8.30am - 3.00pm with 30 minute lunch. One day per week will be spent at University.Skills: Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative....Read more...
Position: Lead Electrical Design Engineer
Job ID: 187/171
Location: Southampton
Salary: £60,000
Job type - Full time Permanent
Benefits – Competitive benefits package
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have several permanent and contract vacancies for multiple businesses across the UK and overseas.
As a Lead Electrical Design Engineer / Electrical Design Engineer / Senior Electrical Design Engineer you will take the lead in designing and improving electrical systems for our luxury yacht range. Focused on creating electrical schematics, panel designs, and cable running schedules, you will lead the electrical system development, R&D, and value engineering initiatives. This role is in Southampton.
Duties and responsibilities of a Lead Electrical Design Engineer / Electrical Design Engineer / Senior Electrical Design Engineer
Lead the Electrical Design Change Request (DCR) process for all yachts.
Oversee and improve electrical design standards and ensure consistency across all models.
Collaborate with production, engineering, and supply chain teams to deliver high-quality designs on time.
Manage the design and development of 2D CAD electrical schematics and cable schedules (AutoCAD).
Support R&D and product improvements, ensuring best practices are integrated into new and existing designs.
Skills & Requirements of Lead Electrical Design Engineer / Electrical Design Engineer / Senior Electrical Design Engineer
Extensive knowledge of marine AC/DC electrical systems, installation, and yacht components.
Proficient in AutoCAD and Microsoft Office.
Experience with marine digital switching systems (CZone) and hybrid drive systems is a plus.
Degree in Electrical Design or equivalent experience, with qualification to 18th Edition IT Wiring Regulations.
BMEA Marine Electrical Technician qualification is desirable.
Proactive problem solver with excellent time management.
Must have a full UK driving license and must be able to travel to Southampton and other sites as required.
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
In this role your average daily/weekly tasks could include:
Setting duties
Fabrication duties
Router operations
Yard supervision
Welding duties
Fitting and assembly duties
CAD operations
Occasional site work if required
Training:
This is a Level 3 Fitter Apprenticeship delivered over a 4 year period
You will attend In-Comm Training 12 Vigo Pl, Aldridge, Walsall WS9 8UG 2 and a half days a week for the first 20 months of your apprenticeship
Training Outcome:
Upon successful completion of this apprenticeship, a full-time position will be available, with the potential for progression onto a Level 4 HNC
Employer Description:SMB Pressings is known for delivering exceptional customer service, backed by over 30 years of experience in the industry. The company understands what it takes to ensure customer satisfaction and has built a reputation for excellence.
Their outstanding service is a key reason why customers continue to return. High production quality, competitive pricing, and reliable, on-schedule deliveries are just some of the factors that place SMB Pressings in the top tier of the industry.
In 2017, this commitment to excellence was recognised at the ‘Made in the Midlands’ Awards, where SMB Pressings received the ‘Manufacturing Achievement’ award. The award highlighted several of the company’s strengths, including:
Continuous investment in new technology
Ongoing training and development of their workforce
A ‘complete project support’ scheme offered to customers for every individual orderWorking Hours :Monday - Thursday, 6.30am - 4.00pmSkills: Communication skills,IT skills,Attention to detail,Customer care skills,Problem solving skills,Team working,Patience,Physical fitness,Hold a drivers licence....Read more...
We are seeking a Plant/Project Engineer to support a growing manufacturing site in Exeter. This role is crucial in ensuring that manufacturing equipment, infrastructure, and facilities are maintained and improved to meet the companys operational and future growth demands. You will take ownership of equipment installation, process improvement projects, and cost reduction initiatives while supporting maintenance activities and ensuring optimal plant performance.
Key Responsibilities of a Plant Engineer:
- Develop and execute project plans for equipment installation, machine rearrangement, and facility upgrades.
- Source, specify, and purchase machinery, equipment, and spare parts to support operational improvements.
- Supervise sub-contractors and suppliers, ensuring compliance with health & safety regulations and project timelines.
- Identify and implement cost reduction initiatives and process improvements.
- Carry out plant engineering activities, including fault finding, reliability improvement, and preventive maintenance.
- Provide technical expertise, including data analysis, planning, and execution, to enhance equipment reliability and performance.
- Lead the creation and maintenance of technical documentation for plant equipment.
- Support maintenance teams in troubleshooting electrical and mechanical issues across the site.
What Were Looking For:
Essential:
- HNC or equivalent qualification in Electrical, Mechanical, or Controls Engineering.
- Minimum of one year of experience in a relevant engineering environment.
- Strong problem-solving skills, with the ability to identify root causes of reliability issues.
- Ability to write maintenance procedures and improve asset management processes.
- Proficiency in Microsoft Word, Excel, and PowerPoint, with awareness of Microsoft Project.
Desirable:
- Experience with CAD software for plant layout and design.
- Familiarity with business systems such as Oracle or MP2.
- Exposure to automation technologies and overall equipment effectiveness (OEE) analysis.
- Multiskilled experience in both electrical and mechanical disciplines.
- Strong communication skills, both written and verbal.
Whats in It for You?
- Competitive salary based on experience.
- Career development opportunities within an expanding manufacturing environment.
- Opportunity to lead exciting engineering projects and process improvement initiatives.
- Work in a collaborative team with a strong focus on innovation and efficiency.
Apply Today!
If you are a Plant/Project Engineer looking for your next challenge, we want to hear from you! To apply, submit your CV or contact Ian at Holt Engineering on 07734406996 for more information....Read more...
Senior Structural Engineer London £60,000 - £70,000 + Tight Knit Team + Established Contracts / Projects + Pension + Stability + Reputable Client Base + Starting ASAP Join a company who are at the forefront of the building services industry as a Senior Structural Engineer, where you’ll be appreciated and respected. Enjoy working and thrive in a small, close-knit team that offers a supportive, people first environment where every voice matters.They operate in the building services industry and have a diverse portfolio of projects with unique technical challenges. As a Senior structural engineer you will be directly involved in projects from start to finish, with an ever-growing environment whilst being rewarded for your hard work. Your Role as a Senior Structural Engineer will include: * Using the latest design software to create and manage structural designs * Liaising with key clients and discussing design/technical solutions within meetings * Provide support and guidance to junior staff, fostering their development and progression. * Monitor and oversee project budgets and staff resources for projects undertaken. * Develop existing customer relationships and promote JMS Engineers' services. The successful Senior Structural Engineer will need: * Bachelor's degree in Civil or Structural Engineering or equivalent * Working towards or already be a chartered engineer * Experience across the UK Residential market * Proven track record of cost estimation and project management. * Commutable to London, FullTime in office Please apply or call Bradley Gilbert on 020 3813 7943Keywords: Structural Engineer, Design Engineer, CAD, Construction, Civils, Consultancy, Solidworks, 3D Civils, London, Kennington, Elephant and Castle, Surrey, Kent, Sussex This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. ....Read more...
Redline Group have recently been engaged by a leading Engineering company based in Manchester. Due to recent project wins they are now looking to recruit a Junior Electronic Design Engineer to be part of their dynamic design team.
The culture is very collaborative where engineers work together to solve engineering related problems and find the best solutions. As such they are looking for like-minded engineers who are looking to be mentored by leading Design Engineers The company currently operated a hybrid working arrangement of 3 days onsite, 2 from home with everybody in on a Wednesday.
The company design and manufacture electronic sensors and components for the global Automation market and they are looking for a Junior Electronic Design Engineer with provable experience in the industry, combined with sound analogue design skills with some firmware development, using embedded C or C++.
Key responsibilities of the Junior Electronic Design Engineer job:
Design and development of barriers for connection between intrinsically safe circuits and non- intrinsically safe circuits
Circuit design, prototyping, verification and release testing
Specification of the design components and creation of the circuit schematic in CAD
Creation of the Intrinsic Safety and EMC Plans required to meet IS and EMC standards
Verification testing of prototypes and review PCB layouts
Key skills required for the Electronic Design Engineer job:
Excellent understanding of electronic/engineering principles and Analogue and Digital circuit design experience
Knowledge of EMC and functional safety requirements
Op-Amp Circuits, Low power/signal transformers and small signal SMPS knowledge is an advantage
Software programming experience will be beneficial
This is a great chance for a Junior Electronic Design Engineer to join a successful and stable business with the opportunity to progress their career long term.
For further details on this exciting Junior Electronic Design job based in Manchester, please contact Ricky Wilcocks on 01582 878810 or 079317 88834 or email rwilcocks@redlinegroup.Com....Read more...
We’re recruiting on behalf of a leading UK defence technology organisation, delivering advanced engineering solutions for naval and maritime applications. Their systems support critical missions across allied defence forces, with a focus on innovation, precision, and performance in the most challenging environments.This is a fantastic opportunity for a Mechanical Engineer with experience in complex enclosure design to join a collaborative, multi-disciplinary team working on cutting-edge maritime technology.The Role
Develop mechanical design concepts and feasibility studies for new and existing products
Lead the design of complex enclosures used in subsea, naval, and defence applications
Work closely with electrical, systems, and manufacturing engineers to deliver integrated solutions
Contribute to proposals and R&D initiatives that support future business opportunities
What You’ll Need
Degree (or equivalent) in Mechanical Engineering
Solid experience with 3D CAD tools – ideally AutoCAD Inventor
Understanding of manufacturing methods for electrical enclosures (fabrication, machining, castings, welding, coatings)
Strong grasp of materials selection and mechanical design under requirements like thermal, EMC, and shock
Excellent communication skills and the confidence to present ideas and designs to stakeholders
A proactive, self-motivated approach with a willingness to learn and shape future processes
Security Clearance: You must be eligible to obtain UK security clearance
Why Apply?
Work on technologies that protect and support naval missions around the world
Be part of a forward-thinking company that values work-life balance and flexible working
Enjoy every other Friday off with a 9-day fortnight
Join a diverse, inclusive team with a supportive culture and exciting growth plans
If you’re an experienced engineer ready to make an impact in a high-tech, mission-critical sector — we want to hear from you. Apply now to take the next step in your engineering career.....Read more...
An opportunity has arisen for a Project Mechanical Engineer to join a well-established engineering company specialising in the re-engineering, repair, and manufacture of components for rotating equipment. This full-time role offers a salary range of £40,000 - £45,000 and benefits.
As a Project Mechanical Engineer, you will be overseeing projects involving the assessment, overhaul, and refurbishment of rotating equipment.
You will be responsible for:
* Assessing rotating equipment received for inspection and repair
* Managing end-to-end refurbishment and overhaul projects
* Producing detailed work instructions to support efficient project delivery
* Maintaining and updating project materials and documentation in the internal job system
* Preparing final reports for client delivery and internal records
* Supporting and promoting quality, environmental, and health & safety standards
* Contributing to ongoing improvements in processes and engineering standards
What we are looking for:
* Previously worked as a Project Engineer, Mechanical Engineer, Service Engineer or in a similar role.
* Degree in mechanical engineering or related discipline
* Having 2 year experience of servicing rotating equipment is preferable
* Familiarity with CAD software is preferable
* Proficient IT skills
Shift:
* Monday - Thursday: 07.45 - 16.15
* Friday: 07.45 - 12.45
What's on offer:
* Competitive salary
* 37-hour working week
* Annual salary reviews and performance-related incentives
* Company pension scheme
* 25 days' holiday plus bank holidays
* Annual bonus linked to company performance
* Healthcare plan and death-in-service cover
This is a fantastic opportunity for a Project Engineer to join a forward-thinking engineering firm and grow your project engineering career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
You'll be learning how to:
Diagnose and resolve technical issues with speed and precision.
Maintain and service PAVA systems to the highest standards.
Perform system upgrades and programming to keep us at the cutting edge.
Produce detailed visit and fault reports (because accuracy matters).
Conduct basic acoustic measurement and analysis.
Install systems – you'll be building the soundscapes of tomorrow!
And the best part? You'll occasionally get to work at prestigious sporting and music venues, experiencing the thrill of high-profile events while on the job! It's a fantastic perk that adds an extra dimension to your career.Training:All training will be work-based. Training Outcome:A rewarding career with progression into management/leadership with further training programmes.Employer Description:B.L.Acoustics are independent consultants with an excellent reputation and track record providing :
– Thorough investigations of problems, to include formal report writing and litigation matters.
– Solid engineering in mechanical / architectural solutions, where necessary, innovative.
– Budgetary comment, providing the proposal and prepared to provide the installed, tested solutions.
– Calibrated equipment to provide comprehensive measurement.
– Prediction processes using CAD based packages.
– A uniform service at the Client’s pace, determining time restraints and milestones.
model2Our activities include :
– Reproduced sound
– Public Address and Voice Alarm Systems to EN54, BS5839 & BS7443.
– Design & build of Recording Studios, Music & Practice Rooms.
– Architectural acoustics, surfaces and room acoustics.
– Noise problems involving noise nuisance, planning, licensing.
– Environmental issues.
– Noise assessments (Noise at Work Act 1989) for Health & Safety issues
– Commercial Noise & Vibration separation to include Recording Studios, Research Laboratories, Factories, etc.
– Vibration measurement.
We provide consultancy in the form of:
– Architectural acoustics
– Audio engineering
– Environmental Noise & PlanningWorking Hours :Monday to Friday, times to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative,Non judgemental,Thrives in dynamic environment....Read more...
