Senior Hardware Design Engineer required to Design VHDL or Verilog for FPGA???s including algorithm implementation and high speed digital with some analogue design.
Key Skills
Verilog or VHDL FPGA Design and Development
Design for Manufacture, DFM and DFT
Electronic Engineering ideally dealing with
Image sensors, optics, Ethernet and RF Design would be advantageous
Senior Hardware Design Engineer required to Design VHDL or Verilog for FPGA???s including algorithm implementation and high speed digital with some analogue design.
Key Skills
Verilog or VHDL FPGA Design and Development
Design for Manufacture, DFM and DFT
Electronic Engineering ideally dealing with
Image sensors, optics, Ethernet and RF Design would be advantageous
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
FPGA Design Engineer required Senior to Principal level required to join a successful
circuit design team on the design and development of high performance products. You will focus on digital logic design for FPGAs calling on your solid fundamental understanding of analogue and digital high speed design.
Requirements
VHDL, commercial experience on Altera FPGAs.
High speed and low power circuit design.
Altium, CR5000, or similar ECAD tool experience.
Understanding of microcontrollers, embedded software, and signal processing techniques.
Embedded C, C++ and Assembly language knowledge.
Electronic engineering, physics, or a similar degree.
Role
Design and Develop precision engineered products from specification to delivery.
Meet product performance, quality, cost, and timescale requirements.....Read more...
FPGA Design Engineer required Senior to Principal level required to join a successful
circuit design team on the design and development of high performance products. You will focus on digital logic design for FPGAs calling on your solid fundamental understanding of analogue and digital high speed design.
Requirements
VHDL, commercial experience on Altera FPGAs.
High speed and low power circuit design.
Altium, CR5000, or similar ECAD tool experience.
Understanding of microcontrollers, embedded software, and signal processing techniques.
Embedded C, C++ and Assembly language knowledge.
Electronic engineering, physics, or a similar degree.
Role
Design and Develop precision engineered products from specification to delivery.
Meet product performance, quality, cost, and timescale requirements.....Read more...
Mechanical Design Engineer - Solidworks Are you a Mechanical Design Engineer with SolidWorks experience seeking a new role in Milton Keynes, Buckinghamshire?
My client is looking for a motivated and enthusiastic Mechanical Design Engineer to support ongoing and future projects. Their products and systems are widely used in the retail environment and are now expanding into new industries, including applications across major airports.
The ideal candidate will have 1–3 years’ commercial experience and a solid understanding of mechanical design principles. This role will involve 3D CAD design, detailed drawings, and supporting projects from concept through to manufacture, so strong SolidWorks skills are essential.
Responsibilities of this Mechanical Design Engineer job based in Buckinghamshire:
Create 3D CAD models and detailed engineering drawings using SolidWorks.
Support the development of products from concept design through to production release.
Liaise with manufacturing and suppliers to ensure designs are practical and cost-effective.
Assist with prototype builds, testing, and design validation activities.
Participate in design reviews and contribute to continuous product improvements.
Skills & Experience Required for this Mechanical Design Engineer job based in Buckinghamshire:
1–3 years’ mechanical design experience in industry.
Proficiency with SolidWorks (3D modelling, assemblies, detailed drawings).
Knowledge of materials, manufacturing methods, and design for manufacture/assembly (DFM/DFA).
Ability to produce and check engineering drawings to industry standards.
This is a fantastic opportunity to join a forward-thinking company that values innovation and offers great scope for career development.
If you have any specific questions about this Mechanical Design Engineer vacancy based in Milton Keynes, Buckinghamshire, please call Nick Drain on 01582 878828 / 07961 158786.....Read more...
Senior RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
FPGA Design Engineer with DSP ideally radar system design experience maximising multiple FPGA???s. The ideal candidate will be at technical leadership level willing to unpack requirements, coach juniors, conduct design reviews and be hands on where needed to deliver working FPGA architecture that is easily implemented to a client environment.
Requirements
Hands on VHDL based FPGA Design experience to Senior or ideally Principal level.
Multiple FPGA architecture.
Digital Signal Processing, high speed, satellite communications, ideally radar experience.
Able to absorb, specify and champion high level requirements taking the time to appreciate and understand the application needs.
Responsibilities
Electronic design of advanced FPGAs, from requirements, preliminary specification, test, system certification to verified design implemented and running on target hardware.
Firmware
VHDL simulation, test bench design, implementation verification and debug using test equipment oscilloscopes, spectrum analysers, signal generators, etc.
FPGA and VHDL Design Reviews.
Masters, Bachelors or PhD in relevant area from a good university.....Read more...
Senior RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
FPGA Design Engineer with DSP ideally radar system design experience maximising multiple FPGA???s. The ideal candidate will be at technical leadership level willing to unpack requirements, coach juniors, conduct design reviews and be hands on where needed to deliver working FPGA architecture that is easily implemented to a client environment.
Requirements
Hands on VHDL based FPGA Design experience to Senior or ideally Principal level.
Multiple FPGA architecture.
Digital Signal Processing, high speed, satellite communications, ideally radar experience.
Able to absorb, specify and champion high level requirements taking the time to appreciate and understand the application needs.
Responsibilities
Electronic design of advanced FPGAs, from requirements, preliminary specification, test, system certification to verified design implemented and running on target hardware.
Firmware
VHDL simulation, test bench design, implementation verification and debug using test equipment oscilloscopes, spectrum analysers, signal generators, etc.
FPGA and VHDL Design Reviews.
Masters, Bachelors or PhD in relevant area from a good university.....Read more...
Are you an experienced Principal Mechanical Design Engineer who is looking to join a world leading R&D company, focusing on an existing aerospace and aviation project founded by the government, based on Loughborough?
Do you want to work on a range of exciting aerospace and aviation projects and technologies that will really make a difference to the future?
If the answer is Yes, this is the Principal Mechanical Design Engineer job for you. The work is essential, and the team are driven by a motivation to change our reliance on fossil fuels and carbon technology.
This Loughborough based organisation is seeking a Principal Mechanical Design Engineer to join the team, applying your mechanical design engineering expertise to lead design and development programs, for products used in applications, predominantly within the Automotive and Aerospace sectors.
As a Principal Mechanical Design Engineer within this job, you will be responsible for:
Mechanical Design of new systems and products.
Ensuring the effective delivery of design and development programmes.
Identifying and implementing process improvements.
Identifying new suppliers and appropriate new realisation methodologies.
Ensuring appropriate engineering processes and tools are used.
The requirements for the Loughborough based Principal Mechanical Design job are:
Must be experienced with Surface Modelling.
Mechanical Design Engineering experience.
Degree-Qualified or equivalent in Engineering or a related Science.
Demonstrable experience of managing product design projects.
A sound understanding of design process.
Ability to inspire a team of engineers.
This is an exciting job opportunity for an experienced Mechanical Design Engineer who is highly motivated and has a good attention to detail. This is a great chance to join an industry recognised company, who are working on exciting next generation renewable fuel technology products and systems, and who can offer the opportunity for career and personal development.
To apply for this Principal Mechanical Design Engineer job, please send your CV to Ricky Wilcocks on rwilcocks@redlinegroup.Com, or phone 01582 87 8810 or 079317 888 34.....Read more...
My client is looking for someone capable of working with User Researchers to design studies, understand and then translate the results into software specifications then communicate these with the programming team and Software Designers / Developers.
You will be responsible for discovering how numerous user, senior management and other research findings can be translated into a compelling design concept. Working within the UX team you will get involved in carrying out user research, insight analysis and user journey mapping in order to provide developers and business analysts with design concepts.
Requirements:
You will have a degree and ideally post graduate qualification and/or research experience. Also relevant industry experience in Interaction Design, HCI, Product Design, Industrial Design and an appreciation of: Business Analysis, Software Development or Visual Design.
....Read more...
My client is looking for someone capable of working with User Researchers to design studies, understand and then translate the results into software specifications then communicate these with the programming team and Software Designers / Developers.
You will be responsible for discovering how numerous user, senior management and other research findings can be translated into a compelling design concept. Working within the UX team you will get involved in carrying out user research, insight analysis and user journey mapping in order to provide developers and business analysts with design concepts.
Requirements:
You will have a degree and ideally post graduate qualification and/or research experience. Also relevant industry experience in Interaction Design, HCI, Product Design, Industrial Design and an appreciation of: Business Analysis, Software Development or Visual Design.
....Read more...
Redline has been retained by a leading process instrumentation manufacturer who are looking for a Lead Electronics Design Engineer to join their R&D team based in Surrey.
Due to significant growth, they are seeking a Lead Electronics Design Engineer to be responsible for the design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries. You will be involved with PCB design, prototyping, test and validation and software interface.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Lead Electronics Design Engineer, based in Surrey:
Proven experience within a senior electronics design role – mentor or managed small teams
Mixed signal design within a regulated industry i.E. Defence, Aerospace, Medical, Automotive etc.
Degree qualified in a related Electronics discipline
Circuit and PCB design
C Software programming
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.
To apply for this Lead Electronics Design Engineer job, based in Surrey, please send your CV to ndrain@redlinegroup.Com, or for more information contact Nick Drain on 01582 878828 or 07961158786....Read more...
Redline has been retained by a leading process instrumentation manufacturer who are looking for a Electronics Design Engineer to join their R&D team based in Surrey.
Due to significant growth, they are seeking an Electronics Design Engineer to be responsible for the design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries. You will be involved with PCB design, prototyping, test and validation and software interface.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Electronics Design Engineer, based in Surrey:
Proven experience within a senior electronics design role – mentor or managed small teams
Mixed signal design within a regulated industry i.E. Defence, Aerospace, Medical, Automotive etc.
Degree qualified in a related Electronics discipline
Circuit and PCB design
C Software programming
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.
To apply for this Electronics Design Engineer job, based in Surrey, please send your CV to Rwilcocks@redlinegroup.Com, or for more information contact Ricky Wilcocks on 01582 878810 or 079317 88834.....Read more...
High power electronics (> 100kW) design Engineer required to work on high value low volume product design. This is a senior role that will take a lead role on all aspects of Power Electronics Design for the product. Design teams are typically quite small (5 ??? 20 Engineers) and work on the full Product Development lifecycle from concept, design, development, manufacture and support.
This is a perfect opportunity for an Experienced high Power Electronics Design Engineer who would like to work in a scientific environment on new designs with cutting edge technologies with technical autonomy over their domain.....Read more...
High power electronics (> 100kW) design Engineer required to work on high value low volume product design. This is a senior role that will take a lead role on all aspects of Power Electronics Design for the product. Design teams are typically quite small (5 ??? 20 Engineers) and work on the full Product Development lifecycle from concept, design, development, manufacture and support.
This is a perfect opportunity for an Experienced high Power Electronics Design Engineer who would like to work in a scientific environment on new designs with cutting edge technologies with technical autonomy over their domain.....Read more...
Subsea Controls Electronics / Electrical Engineer required to work on the design, development and supply of products and services for subsea control and distribution to offshore oil and gas clients.
Skills and experience
Office-based electronics or electrical engineering experience of subsea controls.
Experience with the design and operation of Production Control Systems.
Concept design, detailed design and engineering delivery of electronics control systems.
PCB design and layout.
Experience with the introduction of new products from concept through to design and delivery ideally:
Subsea Electronic Modules.
Subsea Communications Profibus, Canbus, Modbus or Ethernet protocols.
DC or AC power distribution, low (240 V), medium (600 V) or high (1000 V) voltage units.
Subsea Power and Communication Units.
Electrical Test Unit and Master Control Station experience.
Responsibilities
Own and engineer the package from function design specification to design, engineering, manufacturing and testing.
Working closely with the New Product Initiative Team to support the delivery of NPI programs and assisting in defining the technology gaps to drive future NPI alignment.
Generating specifications, test procedures, operating manuals and other technical documentation required for project deliverables.
Ensuring and verifying technical compliance of products with specification, codes, standards, and client technical requirements.
Ensuring that the product design conforms to field proven or qualified technologies.
Oversee manufacturing, delivery and repair work, product testing and commissioning including electrical fault diagnostics, IR, TDR and oscilloscope for tests, installation and commissioning.
....Read more...
Subsea Controls Electronics / Electrical Engineer required to work on the design, development and supply of products and services for subsea control and distribution to offshore oil and gas clients.
Skills and experience
Office-based electronics or electrical engineering experience of subsea controls.
Experience with the design and operation of Production Control Systems.
Concept design, detailed design and engineering delivery of electronics control systems.
PCB design and layout.
Experience with the introduction of new products from concept through to design and delivery ideally:
Subsea Electronic Modules.
Subsea Communications Profibus, Canbus, Modbus or Ethernet protocols.
DC or AC power distribution, low (240 V), medium (600 V) or high (1000 V) voltage units.
Subsea Power and Communication Units.
Electrical Test Unit and Master Control Station experience.
Responsibilities
Own and engineer the package from function design specification to design, engineering, manufacturing and testing.
Working closely with the New Product Initiative Team to support the delivery of NPI programs and assisting in defining the technology gaps to drive future NPI alignment.
Generating specifications, test procedures, operating manuals and other technical documentation required for project deliverables.
Ensuring and verifying technical compliance of products with specification, codes, standards, and client technical requirements.
Ensuring that the product design conforms to field proven or qualified technologies.
Oversee manufacturing, delivery and repair work, product testing and commissioning including electrical fault diagnostics, IR, TDR and oscilloscope for tests, installation and commissioning.
....Read more...
Graduate Design Engineer Location: Huddersfield Salary: Competitive, dependent on experience Working Hours: 38.75 hours per week
Overview An exciting opportunity has arisen for a Graduate Design Engineer to join a well-established engineering business. This role plays a key part in the development and delivery of both new and existing valve products, supporting the engineering team in meeting industry and customer-specific requirements.
Key Responsibilities of the Graduate Design Engineer As a Graduate Design Engineer, you will support the engineering function with tasks including:
Creating general assembly and manufacturing drawings using Autodesk Inventor and AutoCAD.
Preparing bills of materials within the company’s MRP system.
Assisting in the creation of installation, operation, and maintenance manuals.
Supporting the design and development of valve products in line with industry standards (e.g., ASME VIII, ASME B16.34, API 6A/6D).
Contributing to troubleshooting and resolving product performance issues.
Assisting in the preparation of factory test procedures.
Collaborating with departments such as R&D, Sales, and Production.
Skills & Experience Required for Graduate Design Engineer
Strong design skills, ideally with an interest in valve or mechanical product design.
Proficiency in 2D and 3D CAD software (Autodesk Inventor and AutoCAD preferred).
Understanding of engineering drawing standards (BS8888).
Excellent communication skills, with the ability to explain technical concepts clearly.
Exposure to pressure vessel design (training will be provided if needed).
Ideal Candidate for the position of Graduate Design Engineer This role is perfect for a motivated graduate looking to build a career in mechanical design engineering. You’ll be joining a supportive team environment with opportunities for development and hands-on experience across the full product lifecycle.
To apply for the Graduate Design Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Lewis Lynch at E3 Recruitment for more information.....Read more...
Optics specialist required to work on the optical design, development and manufacture of new product lines. Luminaire manufacturing experience would be ideal as you will be driving new lighting solutions that exploit emerging technologies that will be used by Lighting Designers as illumination solutions for large multi-nationals.
You will drive a team who design, prototype and test optics.
You will have
Optical design experience using photonics design tools and lighting market understanding.
Excellent communication skills.
A commitment to producing quality designs and parts.
LED appreciation
Degree, HND level or equivalent qualification in Physics or a related Engineering course with optical content.
The role will involve
Understanding customer technical requirements translating them into specifications and detailed designs then into production.
Drive new design concepts.
Use CAD to design and simulate optics.
Lead and coordinate across departments and project requires: finance, marketing, sales etc.
Lead cross-functional teams to resolve issues.
Investigate new design methods and techniques
Present to engineering teams / customers as needed.
This is a fantastic opportunity for a luminaire optical design expert to enjoy the trust and freedom to exploit technology to bring new products to market.
....Read more...
Optics specialist required to work on the optical design, development and manufacture of new product lines. Luminaire manufacturing experience would be ideal as you will be driving new lighting solutions that exploit emerging technologies that will be used by Lighting Designers as illumination solutions for large multi-nationals.
You will drive a team who design, prototype and test optics.
You will have
Optical design experience using photonics design tools and lighting market understanding.
Excellent communication skills.
A commitment to producing quality designs and parts.
LED appreciation
Degree, HND level or equivalent qualification in Physics or a related Engineering course with optical content.
The role will involve
Understanding customer technical requirements translating them into specifications and detailed designs then into production.
Drive new design concepts.
Use CAD to design and simulate optics.
Lead and coordinate across departments and project requires: finance, marketing, sales etc.
Lead cross-functional teams to resolve issues.
Investigate new design methods and techniques
Present to engineering teams / customers as needed.
This is a fantastic opportunity for a luminaire optical design expert to enjoy the trust and freedom to exploit technology to bring new products to market.
....Read more...
Research, Design and Development of new optical sensing systems to measure temperature and pressure in harsh environments for aerospace, energy, oil & gas, scientific and other domains
Key skills
Optical sensing system research simulation, modelling and data analysis.
Fibre optical sensing, optical sensors or optoelectronics.
Full product design lifecycle (design stage, proof-of-concept, prototyping, production).
Relevant PhD
What you will be doing
Optical system design.
Prototyping
Test, evaluation, design and development....Read more...
Research, Design and Development of new optical sensing systems to measure temperature and pressure in harsh environments for aerospace, energy, oil & gas, scientific and other domains
Key skills
Optical sensing system research simulation, modelling and data analysis.
Fibre optical sensing, optical sensors or optoelectronics.
Full product design lifecycle (design stage, proof-of-concept, prototyping, production).
Relevant PhD
What you will be doing
Optical system design.
Prototyping
Test, evaluation, design and development....Read more...
