High speed and high performance VHDL / VLSI FPGA Senior Designer required to create on-chip IP: e.g. memory controllers, bus controllers, multiscale dataflow computing and other novel system solutions.
Candidates will have a strong academic track record with 2:1 or above in Electronic Engineering, Computer Science or a related subject with strong experience in digital circuit design using VHDL for FPGAs.
The ideal candidate will also have exposure to
Multi-layer PCB design and debug.
High-speed digital design
QDR/DDR memory interfaces
PCI-Express
10G Ethernet
Infiniband
Linux device driver programming.
If you enjoy a challenge and are capable of moving an industry forward they would like to hear from you.....Read more...
High speed and high performance VHDL / VLSI FPGA Senior Designer required to create on-chip IP: e.g. memory controllers, bus controllers, multiscale dataflow computing and other novel system solutions.
Candidates will have a strong academic track record with 2:1 or above in Electronic Engineering, Computer Science or a related subject with strong experience in digital circuit design using VHDL for FPGAs.
The ideal candidate will also have exposure to
Multi-layer PCB design and debug.
High-speed digital design
QDR/DDR memory interfaces
PCI-Express
10G Ethernet
Infiniband
Linux device driver programming.
If you enjoy a challenge and are capable of moving an industry forward they would like to hear from you.....Read more...
Intel processor, (32 / 64 bit x86 families) Board Designer required to work on high specification single microcontroller boards. The ideal candidate will have experience of designing boards that exploit: PCI, (compact & express) bus for high speed, high performance applications, schematic design, power supply, digital and analog interfacing with Embedded C / firmware.
The successful candidate will work on the full design life cycle from definition to production and support. This is a senior hands on role but there are many opportunities to grow or recruit into a team lead or managerial position.
You will have Digital Hardware Design experience of:
32/64 bit microprocessors.
High performance bus architectures e.g. PCI, Rapid IO
Gigabit Ethernet
DDR4, DRAM or similar.
FPGAs
GPGPU
This is a fantastic opportunity for a competent Engineer looking for autonomy in design decisions.
....Read more...
Intel processor, (32 / 64 bit x86 families) Board Designer required to work on high specification single microcontroller boards. The ideal candidate will have experience of designing boards that exploit: PCI, (compact & express) bus for high speed, high performance applications, schematic design, power supply, digital and analog interfacing with Embedded C / firmware.
The successful candidate will work on the full design life cycle from definition to production and support. This is a senior hands on role but there are many opportunities to grow or recruit into a team lead or managerial position.
You will have Digital Hardware Design experience of:
32/64 bit microprocessors.
High performance bus architectures e.g. PCI, Rapid IO
Gigabit Ethernet
DDR4, DRAM or similar.
FPGAs
GPGPU
This is a fantastic opportunity for a competent Engineer looking for autonomy in design decisions.
....Read more...
Do you envision transforming ordinary spaces into extraordinary havens? Are you passionate about translating design trends into beautiful, functional realities? If so, this Interior Designer role could be your perfect fit! About the Role: As an Interior Designer, you'll be the creative driving force, taking projects from initial concept to seamless completion. You'll collaborate closely with clients to understand their vision, then breathe life into it through stunning designs that balance functionality and aesthetics. Here's what you'll be doing:Conceptualize and Design: Conduct initial consultations, delve deep into client briefs, and develop creative design concepts that meet both functional and aesthetic goals.Technical Expertise: Craft detailed technical drawings, floor plans, and specifications, ensuring adherence to building codes and regulations.Material Magic: Select materials, finishes, furniture, and décor that seamlessly align with the design vision and budget.Project Management Prowess: Manage projects from inception to completion, including procurement, contractor liaison, site visits, and meticulous budget control.Presentation Perfection: Create captivating mood boards, presentations, and proposals that wow clients and stakeholders.Stay Inspired: Continuously update your knowledge on design trends, technologies, and sustainable practices within the industry.Here are the skills you'll need:A Bachelor's degree in Interior Design or a related field.Experience in residential/commercial interior design is a plus!A keen eye for design principles and a strong creative vision.Excellent communication and presentation skills to collaborate effectively with clients and team members.Proficiency in design software like AutoCAD, SketchUp, and design visualization tools.A solid understanding of building codes, materials, and construction principles.Strong organizational and project management skills, with the ability to multitask and meet deadlines efficiently.A positive attitude, professionalism, and a passion for exceeding client expectations.Benefits of this Job:Shape environments that inspire and delight your clients.Expand your portfolio and explore your design passion through challenging and varied projects.Learn from experienced professionals and contribute your unique ideas in a team that values your input.Competitive Salary of £22k - £28k DOE This career path offers endless opportunities to unleash your creativity, solve problems through design solutions, and leave a lasting impact on people's lives. From cozy homes to vibrant workplaces, your vision will transform spaces into something truly special.....Read more...
Electrical or Electronics Designer required to develop, implement and test components for complex electro-mechanical devices required to work in extreme environments.
The role exists within a precision engineering environment where you will work as a part of cross-functional teams on the full design life-cycle including technical planning for system integration, test and validation, authoring of functional specifications and the development of new principles and concepts. You will also perform technical planning for system integration, test and validation, authoring of functional specifications, and contribute to the development of new principles and concepts.
Requirements
MEng or MSc in Electrical or Electronic Engineering
Electrical or Electronic Design Digital design, Microprocessors both Microcontrollers and DSPs, FPGA design, Signal processing, Analog design including amplifiers and filters, Power electronics, Motor control.
Assembler, ???C???, RTOS
Troubleshooting and Failure Analysis.
Electrical and Electronic systems assembly and disassembly.
Schematic CAD and VHDL entry....Read more...
Electrical or Electronics Designer required to develop, implement and test components for complex electro-mechanical devices required to work in extreme environments.
The role exists within a precision engineering environment where you will work as a part of cross-functional teams on the full design life-cycle including technical planning for system integration, test and validation, authoring of functional specifications and the development of new principles and concepts. You will also perform technical planning for system integration, test and validation, authoring of functional specifications, and contribute to the development of new principles and concepts.
Requirements
MEng or MSc in Electrical or Electronic Engineering
Electrical or Electronic Design Digital design, Microprocessors both Microcontrollers and DSPs, FPGA design, Signal processing, Analog design including amplifiers and filters, Power electronics, Motor control.
Assembler, ???C???, RTOS
Troubleshooting and Failure Analysis.
Electrical and Electronic systems assembly and disassembly.
Schematic CAD and VHDL entry....Read more...
Senior Graphic Designer / Art Director required to oversee delivery of visual elements across creative product line projects ensuring brand, products, solutions, services etc. are consistent. You will be instrumental in the production, coordination and delivery of marketing materials and communications that leverage best practice ensuring the look and feel is fresh, engaging and in line with the organisation.
This role oversees a team of graphic designers who work with internal technical communities: marketing, scientists, product champions, project managers, operations managers etc. to develop visually engaging marketing material.
What you will have:
Experience leading a team that is responsible for the marketing and communications needs of an Oil and Gas organization ideally directing, video and animation production, and running creative projects with multiple stakeholders
What you will be involved with:
- Typography, image manipulation, illustration and animation
- Adobe CC products such as Illustrator, Photoshop, InDesign, After Effects, Premiere Pro, etc.
- 3D software like 3D Studio, Maya, Cinema 4D, Blender (ideally 3Ds Max)
- Passionate graphic design and art direction
Please apply with your CV in the first instance for a confidential chat.....Read more...
Senior Graphic Designer / Art Director required to oversee delivery of visual elements across creative product line projects ensuring brand, products, solutions, services etc. are consistent. You will be instrumental in the production, coordination and delivery of marketing materials and communications that leverage best practice ensuring the look and feel is fresh, engaging and in line with the organisation.
This role oversees a team of graphic designers who work with internal technical communities: marketing, scientists, product champions, project managers, operations managers etc. to develop visually engaging marketing material.
What you will have:
Experience leading a team that is responsible for the marketing and communications needs of an Oil and Gas organization ideally directing, video and animation production, and running creative projects with multiple stakeholders
What you will be involved with:
- Typography, image manipulation, illustration and animation
- Adobe CC products such as Illustrator, Photoshop, InDesign, After Effects, Premiere Pro, etc.
- 3D software like 3D Studio, Maya, Cinema 4D, Blender (ideally 3Ds Max)
- Passionate graphic design and art direction
Please apply with your CV in the first instance for a confidential chat.....Read more...
A growing digital transformation team is seeking a ServiceNow Developer to support their ServiceNow team. This role is ideal for someone who wants to build modern workflow applications and front-end experiences that enhance user journeys.
You will collaborate closely with senior architects and cross-functional teams to shape and deliver impactful ServiceNow solutions across HR, IT, and Customer domains, using advanced capabilities such as Gen AI, Now Assist, and Workflow Data Fabric.
Key Experience
- Hands-on development experience within ServiceNow (CSM, ITSM, HRSD, or related areas)
- Strong front-end skills in JavaScript, HTML, and CSS
- Experience building custom dashboards and workflows using UI Builder or Service Portal
- Familiarity with integrations via Flow Designer or IntegrationHub
- Understanding of customer journeys, personalisation, and user experience design
Security Requirements
- Candidates must be UK-based
- Eligibility for SC Clearance is required
- Continuous UK residency for the past 5 years is essential
Package Salary up to £70,000 per annum depending on experience, plus an excellent benefits package.
If you are ready to help develop meaningful and innovative ServiceNow solutions within a supportive environment, please apply with your CV to learn more.....Read more...
Snr AV Systems Designer – This is new position that is looking for a tried and tested Corporate / Commercial AV Systems Design Engineer. You will need to have a min of 6years in the use of AutoCAD to design AV systems, AV schematics, AV rack layout and elevations / room layout. Projects will range from £250k into the millions, so previous experience on large scale projects is a must. The systems will be installed either the Corporate, Hospitality or leisure marketplace. Due to the technical nature of this role, you must have a technical AV background that brings skills and knowledge of Crestron control, Lutron lighting, AV related networks and switching, along with audio solutions and large scale videowall deployments. If you have the relevant skills and experience, please send your full CV ASAP.
AV A/V A-V AUDIOVISUAL AUDIO/VISUAL AUDIO-VISUAL AUTOCAD CAD DESIGN SYSTEMS SOLITUINS RACK CRESTRON EXTRON NETWORK LIGHTING SOUND AUTOMATION CONTROL LONDON SURREY SUSSEX KENT HANTS HAMPSHIRE BERKSHIRE BUCKS BUCKINGHAMSHIRE
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV....Read more...
Assist in the setting and running of a four colour printing machine
Operate machinery under supervision
Work to ISO 9001 Quality procedures
Work to BRC Food hygiene procedures
Help maintain a clean, safe and organised work environment
Follow health and safety procedures at all times
Training Outcome:Potential for further development within the company for the right candidate. Employer Description:Cardway are a designer and manufacturer of corrugated packaging, established since 1977. We have been supplying businesses with high quality packaging solutions for over 45 years. This experience has allowed us to work with a huge variety of customers in nearly every sector. We have seen, worked on solved thousands of problems that our customers have challenged us with over these years. Working Hours :Monday to Friday
39 hours a week.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Patience,Able to use initiative....Read more...
As an Engineering Design Apprentice, you’ll be part of our Waterfront and Design Team, supporting a range of projects across the Royal Navy’s submarine fleet. The team is part of a 200-strong engineering community responsible for capability upgrades, defect investigations, safety assessments and specialist analysis - all of which help ensure submarine safety and availability for the UK’s Continuous At Sea Deterrent.
Every day is different as you cover a wide variety of design-related activities. You’ll create 2D and 3D computer-aided design (CAD) drawings, assist with spatial and structural validation surveys onboard submarines, and contribute to design reviews and assurance activities.
You’ll also gain experience in using engineering documentation, understanding change control and developing the communication skills needed to work with engineers across multiple disciplines.
Every project you support plays a vital part in protecting people and assets. The design information you help to create and maintain will contribute directly to the continued safety, reliability and performance of the Royal Navy’s submarine fleet. Training:As part of your apprenticeship, you’ll study for the Level 3 Engineering Design Technician Apprenticeship Standard through Train’d Up.
Training blends virtual learning with workplace experience. You’ll take part in live tutor-led e-tutorials, supported by regular feedback and assessments that help you apply your learning as you go.
By the end of the programme, you’ll have achieved a recognised qualification as a Level 3 Engineering Design Technician and developed the practical experience to apply your learning confidently within a professional design environment. Training Outcome:Upon completing your apprenticeship, you’ll progress into a Draughtsperson role within the Waterfront and Design Team.
A newly qualified Draughtsperson at Babcock currently earns a competitive salary of around £30,000 per annum, with opportunities to grow into positions such as Designer, Senior Designer and Engineer for those who show drive, curiosity and potential.
From there, your development doesn’t stop. Through the Babcock Role Framework, you’ll have a clear view of how your career can progress, with mapped-out pathways, development opportunities and the tools you need to get wherever you want to go. Employer Description:Babcock is an international defence company providing support and product solutions to enhance our customers’ defence capabilities and critical assets.
We provide through-life technical and engineering support for our customers’ assets, delivering improvements in performance, availability and programme cost. Our c27,700 employees deliver these critical services to defence and civil customers, including engineering support to naval, land, air and nuclear operations, frontline support, specialist training and asset management.
We also design and manufacture a range of defence and civil specialist equipment, from naval ship and weapons handling systems to liquid gas handling systems. We also provide integrated, technology-enabled solutions to our defence customers in areas such as secure communications, electronic warfare and air defence.Working Hours :Monday to Friday 9am to 5pmSkills: Communication skills,Attention to detail,Team working....Read more...
A high end independent Opticians based in Cambridge are looking for a full time Optical Assistant to join the team
Optical Assistant - Role
Multi-award winning practice
Modern, Boutique environment
Close knit team with a family feel
A focus on the customer experience
Varied frame range including exclusive designer and niche brands
Travel to international trade shows
Regular training session both in-house and external
Working 5 days a week including a Saturday
Opening hours from 8.30am to 5.30pm
Salary between £22,000 to £25,000 DOE
Bonus scheme
Free parking available
Optical Assistant - Requirements
1 + Years experience of working in an Opticians
Flair for fashion
Creative
Willingness to go above and beyond
Loyal
Team player
Attention to detail
To avoid missing out on this opportunity, please send your CV across to Rebecca Wood using the ‘Apply’ link as soon as possible.
....Read more...
A leading exhibition stand design company is seeking a motivated mid-weight designer to become an integral part of our dynamic Creative department, based in our Stratford-upon-Avon studio. In this role, you will report directly to our Head of Design and provide crucial support to the creative team. Role & Responsibility As a key mid-weight designer, you will play a pivotal role in our creative process, effectively bridging the experience levels between our junior and senior design team members. This position typically requires a few years of industry experience and offers a stimulating blend of creative development, technical application, and project management. Your core responsibilities will encompass:Developing innovative and engaging design concepts for exhibitions and events.Creating compelling visual assets, including renderings and presentations.Ensuring the accurate and efficient technical execution of design projects through to production.Collaborating closely with the Client Services and Projects teams to guarantee design solutions align with client briefs, brand guidelines, and project objectives.Crafting well-articulated client brief responses and engaging in client design briefing and presentation meetings.Designing and delivering 3D projects effectively under the direction of senior team members.Meticulously ensuring all undertaken work is accurate and strictly adheres to provided information and specifications.Utilising key insights and strategic thinking to develop, present, and ultimately secure winning design solutions for our clients.Attending introductory meetings with clients and confidently leading presentations to convey design concepts and proposals.Proactively drawing upon personal inspirations, experiences, and industry knowledge to identify fresh perspectives and innovative approaches.Actively participating in team briefings and forums to facilitate information sharing and encourage collaborative engagement.Effectively organising and prioritising assigned tasks, clearly communicating progress and providing accurate time estimates.Maintaining a high level of efficiency while working according to established schedules and within defined timeframes.Qualifications and Skills Requirements We are looking for candidates who demonstrate:Strong critical and analytical thinking abilities.Proven experience in creating client brief responses and participating in client meetings.The ability to design and deliver 3D projects under guidance.A meticulous approach to ensure accuracy in all work.The skill to leverage insights to build and present successful client solutions.Confidence in client-facing interactions and presentation skills.A proactive approach to seeking inspiration and exploring new ideas.Excellent teamwork and communication skills.Strong organisational skills and the ability to manage time effectively.Fluent proficiency in the Adobe Creative Suite, 3DSMax/Vray, and AutoCAD.What You'll Get We highly value our team members and offer a comprehensive benefits package designed to attract and retain the best talent:25 days holidayBirthday holidayCompany eventsLife assuranceTravel insurance24/7 access to GP consultationMental Health supportGet Fit ProgrammeFinancial guidanceSecond medical opinionBurn out preventionDiet supportLegal guidanceSmoking cessationLife events counsellingHealth dietOur Values We are a company of committed and curious individuals, a diverse group of expert minds dedicated to understanding and meeting our clients' needs. We foster a collaborative environment and value individuals with a proactive, can-do attitude who consistently go the extra mile and thrive as team players.....Read more...
A well-established independent Opticians based in Sheffield are looking for a full or part time Dispensing Optician to join their practice.
Dispensing Optician - Role
Traditional community based independent Opticians
Ideally working between 2 practices
Experienced and passionate Director
A focus on customer care ensuring every patient leaves happy
Plenty of time to spend with patients
Varied frame range including exclusive designer brands – Tom Ford, Ted Baker, Wolf Eyewear
Quality dispenses
Freedom to work with different lens suppliers
Fantastic development opportunities
Working 3, 4 or 5 days a week including Alt Saturdays
Opening hours from 9am to 5.30pm (1pm on a Sat)
Salary up to £33,000 DOE
Professional fees covered
Regular in-house training
Free parking close by
25 days holiday plus bank holidays
Extra day off for birthday
Professional fees paid
Dispensing Optician - Requirements
Registered with the GOC
Loyal
Caring attitude who enjoys going above and beyond
Team player
Attention to detail
To avoid missing out on this opportunity, please send your CV across to Rebecca Wood using the ‘Apply’ link as soon as possible.....Read more...
Lead AV Creative Residential Designer – This role is seeking a true creative in the world of high end residential systems. You will be tasked with managing the full design process from cradle to grave. You will be the first pint of contact with HNWI and be truly great with client liaison. You will need to bring a creative flare to systems designs, client presentations and the use of av technology to create a true masterpiece of AV integration. Your understanding of project costs and timescales will come from a min of 7years high end residential AV integration. Candidates that have been working for an AV systems integration company or for themselves will be considered for this role. You will be expected to keep an eye on emerging technologies and how best to integrate these into new one off bespoke AV projects. I need to see from you a real passion for AV technology and keeping clients fully updated on progress of their project. So if you are leader looking for the next step in your AV career then send me your full detailed CV ASAP.
AV A-V A/V AUDIOVISUAL AUDIO/VISUAL AUDIO-VISUAL BESPOKE RESIDENTIAL CEDIA CRESTRON LUTRON DALI LIGHTING SOUND INTEGRATION INSTALLATION DESIGN AUTOCAD BIM REVIT 3D COSTING PRESENTATION CREATIVE CONSULTANCY CONSULTANT KENT LONDON
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV....Read more...
An exciting opportunity has arisen for a Electronic Engineer based in Milton Keynes, Buckinghamshire to join a leading engineering company that design a range of electronic components and systems for aerospace and defence applications.
The main purpose of the Electronic Engineer role, based in Milton Keynes, Buckinghamshire, will be to Lead the design and layout of PCBAs and thick film hybrid circuits for new and existing products. You will work with packages such as Altium Designer to produce detailed PCB and substrate layouts, wire bonding layouts, and package designs.
Some of the key experiences and competencies for the Electronic Engineer, based in Milton Keynes, Buckinghamshire will be to work to aerospace / defence standards ideally within a microelectronic product line. You will have a strong Electronics engineering background, including analogue/digital circuit design.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Electronic Engineer job based in Milton Keynes, Buckinghamshire sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1299. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
C++ Developer
Location: Cambridge
We are exclusively partnered with a company in Cambridge specialising in high-end audio software. Due to growth and expansion of their range, they are looking for a C++ Developer to turn existing DSP into commercial-grade plug-ins and help shape the next generation of audio products.
In this C++ Developer role, you will:
Turn existing DSP code into professional audio plug-ins for macOS and Windows
Develop engaging and dynamic user interfaces from designer mock-ups
Support licensing, protection workflows, and software releases
Maintain and improve existing plug-ins in collaboration with the wider team
The ideal C++ Developer will have:
Strong experience in C++ development in an audio or music-related environment
Expertise with JUCE and plug-in development (highly beneficial)
Familiarity with cross-platform software development
Understanding of real-time or low-latency programming principles
A keen interest in music, audio production, or sound technology
This is a fantastic opportunity to join a small, innovative company at the forefront of audio technology, with scope to grow creatively and technically within the business.
To apply for this C++ Developer role in the Cambridge area, please send your CV to efrost@redlinegroup.Com or call Ed on 01582 878819.....Read more...
A luxury independent Opticians based in Southport, Merseyside are looking for a full time Dispensing Optician to join the team.
Dispensing Optician – Role
Modern independent practice
Fashion focused
Loyal patient base
Amazing 5* patient reviews
Access to designer frames such as Lindberg, Cartier and Tom Davies
Specialist sports vision
Personal frame consultancy
Provide a comprehensive dispensing service
Measurements, collections, adjustments etc
Working alongside a highly experienced Director/Dispensing Optician
Full time role including Saturdays, 9am to 5.30pm (5pm on a Sat)
Salary between £28,000 to £32,000 plus a range of benefits
Potential to move into management in the future, with training and development offered
Professional fees paid
Dispensing Optician – Requirements
GOC registered Dispensing Optician
Must be calm, comfortable and confident at all times when talking to patients
Maintain the high level of customer care expected by patients of the practice
Ability to learn and want to develop
Flair for fashion
To avoid missing out on this opportunity, please send your CV across to Rebecca Wood using the ‘Apply’ link as soon as possible.
You can now message us via our company WhatsApp - 07933115681 Feel free to get in contact about any roles/recruitment needs. https://lnkd.in/dGyVayep....Read more...
We are currently recruiting for a Technical Designer to join a leading luxury bespoke kitchen and joinery company based in London. This is an excellent opportunity to work on high-end, design-led projects within a highly skilled and creative team.
Skills and Requirements:
• Strong experience in technical design for bespoke joinery or luxury interiors
• Excellent proficiency in AutoCAD (2D & 3D)
• Solid understanding of cabinet construction and modern furniture manufacturing techniques
• High level of attention to detail with the ability to produce accurate technical, manufacturing, and installation drawings
• Strong communication skills and ability to work effectively within a multi-disciplinary team
• Experience working closely with project managers, designers, and workshop teams
If interested, please get in touch with Neil, or contact the office on 0203 008 5212. Alternatively, you can click “Apply” to forward an up-to-date copy of your CV.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer, and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of gender, race, age, sexual orientation, religion, or belief.
....Read more...
Support the existing team with the assembly, build, and testing of in-house tooling and equipment.
Assemble mechanical, hydraulic, and electronic equipment (initially focused mainly on mechanical systems).
Use and be trained in the use of hand tools and electronic test equipment.
Repair, maintain, and service a wide range of machinery.
Fit replacement parts, carry out fault-finding, and diagnose mechanical and electrical issues.Training:This programme is delivered via a day release delivery model which means that one day per week, your attendance is required at our Engineering Campus (NG17). This attendance is required during term time only.
You will work with expert assessors and tutors to develop new knowledge, skills and behaviours within the profession.
You will experience a blended learning model.Training Outcome:Potentially full-time employment upon completing the apprenticeship successfully.Employer Description:Founded and based in the UK, Hy-Ram Engineering Co. Ltd. have established themselves as a leading designer and manufacturer of specialist tools and equipment for both plastic and metallic distribution pipelines worldwide!
Principally working across water, gas, wastewater and industrial sectors, we provide a range of products and services essential for the provision of jointing, installing and maintaining utility distribution networksWorking Hours :Monday to Friday 7.45-16.15 (option to leave at 13.00 on Friday if time made up beforehand).Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Initiative....Read more...
Key Responsibilities
Handle incoming enquiries and provide product information
Prepare quotes and follow up on leads
Process orders and provide necessary updates to customers
Work closely with other departments and suppliers
Maintain accurate CRM records
Training:
Business Administration Level 3 apprenticeship standard.
Functional Skills if necessary.
Online delivery with workshops on:
Self-Awareness
Managing Performance
Communication and Time Management
The Organisation and the Value of Your Skills
Stakeholders
Presentation Skills
Business Fundamentals and Regulations
Policies and Decision Making
Project Management
Training Outcome:To be decided upon completion of the apprenticeship. Possible progression into a full-time role. Employer Description:Here at GB Inspection Systems Ltd. we are a leading UK designer and manufacturer of Ultrasonic Transducers and Accessories, and a supplier of NDT Equipment, Consumables, Calibration and Servicing. GB Inspection Systems (GBIS) was founded in 1984, and offers a wealth of experience in providing an exceptional service to our global clients from within the NDT industry, with quality products at competitive prices.Working Hours :Monday to Thursday 7:55am to 4:30pm (45 mins breaks)
Friday 7:55am to 1:00pm (15 mins break)Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Initiative....Read more...
An exciting opportunity has arisen for a Mechanical Design Engineer (Automotive Components) to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Mechanical Design Engineer, you will be responsible for transforming ideas into precision-engineered products, from prototype to production, ensuring quality, cost, and delivery targets are met.
This full-time role offers benefits and a salary of £37,000 working 37.5 hours a week.
Key Responsibilities
? Developing CAD concepts using CATIA V5 (surface, solid, and 2D) based on customer data and packaging constraints.
? Providing design and manufacturing input to assess feasibility, cost, and capability, coordinating with internal teams and suppliers.
? Leading design feasibility reviews and ensuring designs meet customer and internal standards.
? Creating detailed CAD models for prototype manufacture and approval.
? Create and update the Manufacturing Feasibility Report (MFR) during all stages of the project.
? Develop and validate process flows, PFMEA, Control Plans, and Standard Operating Procedures for pre-production
? Managing prototype builds, liaising with suppliers, tooling teams, and manufacturing departments.
? Overseeing the finalisation of designs for production release, ensuring the correct application of GD&T and tolerance stack-ups.
? Supporting production ramp-up and driving continuous improvement initiatives.
What We Are Looking For
? Previously worked as a Mechanical Design Engineer, Mechanical Engineer, Mechanical Designer, Product Design Engineer, or in a similar role within an engineering design and manufacturing setting.
? Have prior experience in new product introduction (NPI) and process development
? Proficiency in CATIA V5 for 3D modelling and 2D engineering drawings.
? Strong knowledge of GD&T, datum structures, and manufacturing proces....Read more...
