Disassemble and overhaul heavy plant machinery
Work on diesel engines, hydraulics, and electrical systems
Use cutting-edge tools to optimise performance
Ensure machinery is prepared to high standards
Rebuild engines, electronic and hydraulic systems
Occasionally, be required to travel to customer sites
Training:Mechatronics Maintenance Technician Level 3.
This programme is delivered via a day release delivery model which means that one day per week, your attendance is required at our Engineering Campus (NG17). This attendance is required during term time only.
You will work with expert assessors and tutors to develop new knowledge, skills and behaviours within the profession.
You will experience a blended learning model.Training Outcome:Candidates who successfully complete the apprenticeship will be offered a permanent full-time role.Employer Description:JKS Boyles UK Ltd has a wealth of experience, and has established itself as one of the leading drilling equipment manufacturers and suppliers in the UK. Successful distributor agreements have allowed JKS Boyles to sell into all sectors of the UK drilling industry including foundation piling, site investigation, geothermal drilling, ground stabilisation, quarrying and water well operations, and has provided opportunities to have a sizeable share of the UK market.Working Hours :8am - 5pm Monday - Thursday and 7am - 4pm FridaySkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative,Mechanical aptitude,Basic tool handling,Willingness to learn....Read more...
You will become part of our team, fabricating and assembling drilling tools and equipment and utilising:
Mig Welding with Mild steel wire
Stainless stell wire and Hard facing wire
Oxy-actelyne cutting equipment
Welding rotator Associated hand tools
Familiarisation with associated equipment within the facility.
All works to be carried out following Health & Safety protocols and adhering to Quality Standards ISO 9001.
Working hours would be 07:30 to 17:00, Monday to Friday, with one of the days as day release. Overtime may be available during busy periods. Our ideal candidate will be hard working, keen to learn and have access their own transport.Training:
The learner will be studying the Carpentry and Joinery Level 2 Apprenticeship Standard qualification
Day release to West Suffolk College
Functional skills will be studied if equivalent qualifications are not held
Training Outcome:This apprenticeship could lead you to a full time job within the manufacturing sector, with further opportunities to expand your fabrication skills. Through further studies and testing you could become a coded welder or weld co-ordinator or find new and interesting ways in which to use your skill set.Employer Description:We are a family run and owned business who are one of the market leaders in Foundation Drilling Tools. We have a state-of-the-art manufacturing facility boasting an impressive array of cutting-edge machinery for the production of Foundation Drilling Tools.Working Hours :Monday - Friday, between 7:30am and 5.00pm.Skills: Communication skills,Attention to detail,Team working,Initiative....Read more...
Mig welding with mild steel wire
Stainless wire and hard facing wire
Oxy-Acetylene cutting equipment
Welding rotator and associated hand tools
Familiarisation with associated equipment within the facility
Training:Day release training will be with West Suffolk College.Training Outcome:This apprenticeship could lead you to a full-time job within the manufacturing sector, with further opportunities to expand your fabrication skills. Through further studies and testing you could become a coded welder or weld co-ordinator or find new and interesting ways in which to use your skill set. Employer Description:We are a family run and owned business who are one of the market leaders in Foundation Drilling Tools. We have a state-of-the-art manufacturing facility boasting an impressive array of cutting-edge machinery for the production of Foundation Drilling Tools.Working Hours :Monday to Friday 7:30am to 5:00pmSkills: Communication skills,Attention to detail,Problem solving skills,Logical,Team working,Initiative,Physical fitness....Read more...
Control Panel Wireman required for a busy workshop for a long run of work in Bishops Stortford.
Duties & Responsibilities:
Reporting to workshop Supervisor
Marking, drilling, and fixing equipment to steel mounting plates using drawings
Installing electrical components onto mounting plates.
Installing wiring, numbering crimping, and terminating cables following wiring schematics.
Drilling/punching out steel enclosures and installing labelling and electrical components on doors.
Working alongside other panel wireman, but working from own workbench.
Equipment needed
Hand tools – screwdrivers, cutters, wire strippers and crimping tools (specialist crimping tools will be provided)
PPE – Safety Boots (other PPE will be provided)
Skills Required
Control Panel experience, must be able to read electrical drawings and wire from them.
Experience of assembly of enclosures, and common items – relays contactors terminals, switchgear etc.
Working Hours
Monday – Thursday – 07:00 -16:30 with 1 hour – unpaid lunch break
Fridays – 07:00 – 14:00hrs with 1 hour – unpaid lunch break. First Month – 40hours per week
After first month same hours above – however we will pay the hours lunch break – making total hours 45hours per week.
Optional overtime is paid time and a half rate – Saturdays – typical 07:00-13:00hrs or extra hours on evenings 16:30 – 19:00hrs
....Read more...
Control Panel Wireman required for a busy workshop for a long run of work in Stansted.
Duties & Responsibilities:
Reporting to workshop Supervisor
Marking, drilling, and fixing equipment to steel mounting plates using drawings
Installing electrical components onto mounting plates.
Installing wiring, numbering crimping, and terminating cables following wiring schematics.
Drilling/punching out steel enclosures and installing labelling and electrical components on doors.
Working alongside other panel wireman, but working from own workbench.
Equipment needed
Hand tools – screwdrivers, cutters, wire strippers and crimping tools (specialist crimping tools will be provided)
PPE – Safety Boots (other PPE will be provided)
Skills Required
Control Panel experience, must be able to read electrical drawings and wire from them.
Experience of assembly of enclosures, and common items – relays contactors terminals, switchgear etc.
Working Hours
Monday – Thursday – 07:00 -16:30 with 1 hour – unpaid lunch break
Fridays – 07:00 – 14:00hrs with 1 hour – unpaid lunch break. First Month – 40hours per week
After first month same hours above – however we will pay the hours lunch break – making total hours 45hours per week.
Optional overtime is paid time and a half rate – Saturdays – typical 07:00-13:00hrs or extra hours on evenings 16:30 – 19:00hrs
....Read more...
2x Steel Erectors required to start in Northampton, NN7 from Thursday 19th June. Start Date: Thursday, 19th June Contract Longevity: 2 weeks, potentially longer Work Hours: 8:00am to 6:00pm (10 hours paid per day) Rate: £25.00 per hour (CIS) Duties • Drilling and fixing steel plates to existing steel beams • Working at height using MEWPs and mobile scaffold • Operating hand tools and rotabroach for steel installation tasks Requirements • CSCS card • Standard steelwork qualifications including MEWPs and mobile scaffold tickets • Must have own hand tools and Rotabroach On-site parking available Please get in touch with Josh 07799803257 on WhatsApp if you are available for this role....Read more...
This will be a varied role, offering onsite training in many facets of engineering, with scope to learn further through to toolmaking and moulding machine operating
Days will be filled with milling, turning, drilling, inspection and reading drawings
We have a constant influx of different projects to keep interest, and creative thought processes for the active mind
Training:
Full Machinist Technician Level 3
4 days with employer and 1 day at our Luckyn Lane Campus, Basildon
Training Outcome:
Possible full-time position on successful completion of the apprenticeship
Employer Description:With nearly half a century in business, we are firmly established as a leading injection moulding manufacturer of threaded plastic components. We manufacture threaded plastics in Essex in the UK and ship to businesses worldwide.Working Hours :This would be Monday- Friday,
9am to 5pm with flexibility to complete required hoursSkills: Attention to detail,Problem solving skills,Presentation skills,Number skills,Initiative,Engineering....Read more...
TIG Welder / Fabricator required
Based in Derby DE23
Paying £17.50 Paye or £22.50 CIS
Hours of work
Monday Friday 0730- 1630
Overtime available paid at a premium
Our client is an engineering company who manufacture highly technical bespoke products
Due to growth, they are now looking for an additional Skilled TIG Welder Fabricator to join their highly skilled team in Derby
TIG Welder Fabricator worker role will include
Ability to TIG Weld stainless steel up to 5mm
Reading engineering drawings,
Fabricating stainless steel, from start to finish to include cutting, forming, welding, drilling and finishing.
The Successful TIG Welder/Fabricator worker will have
Experience in sheet metal work
Company provides
Overtime available and required at time
Interested? To apply for the TIG welder/Fabricator role
, here are your two options:
"This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for sharon Pickering on 0116 2545411 between 8am - 5pm or email outside of these hours.
"I think I'm right for this position, but I'm not sure I have enough to be get an interview" - Click "apply now" so I can read your CV and let you know
Ref TIG welder/Fabricator worker....Read more...
Operating the panel/beam saw/CNC operating
Using various drilling machines
Edging raw materials with an edge-bander
Accepting deliveries
Assisting with the smooth running of the factory
Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Progress onto more permanent employment may be available to the right candidate.Employer Description:European Kitchens & Bedrooms uses the latest machinery to manufacture high quality kitchen and bedroom carcasses, right here in the UK.
This state-of-the-art technology means our customers can benefit from the highest levels of precision, quality and efficiency.
We have invested in the most advanced CNC systems and edge-banding plant to ensure that we offer consistent quality time after time. Our carcasses are designed and built with passion by staff skilled in practical and mechanical proficiencies.Working Hours :Monday - Thursday, 7.30am - 4.15pm. Friday, 7.30am - 3.45pm.Skills: Communication skills,Organisation skills,Problem solving skills,Logical,Initiative,Patience....Read more...
To assist with the functional testing of equipment in the workshop
To assist with the mechanical assembly and mounting of hardware, including drilling, tapping and cutting
Manual handling of goods received or despatched from Warehouse, including Picking, Checking and Packing
Training:
Working towards a Level 2 Supply chain warehouse operative apprenticeship standard, including Functional Skills if required
Training Outcome:
Once the apprenticeship is successfully completed, if you're the right candidate for the job, you will be encouraged to stay with the company and work your way up the ladder
Employer Description:NSSLGIobaI is a leading independent provider of satellite communications and IT management solutions with innovation and customer service at the core of its DNA. With over 50 years of experience in the government and maritime markets, NSSLGlobal leverages its deep customer understanding and engineering skills to deliver integrated solutions.Working Hours :Monday to Friday
9:00am to 5:30pmSkills: Communication skills,IT skills,Attention to detail,Problem solving skills,Administrative skills,Team working,Physical fitness,trustworthy....Read more...
Milking as part of a 3 person team
Feeding/working with livestock
General farm maintenance e.g. Fencing, building maintenance, cleaning
Training:General Farm Worker Level 2 Apprenticeship Standard:
An apprenticeship includes regular training with a college or other training organisation
At least 20% of your working hours will be spent training or studying
Training Outcome:
For the right candidate a full time position is likely to be on offer – as either a general farm worker or in a specific area of interest if the right qualities are identified i.e. Full time Tractor driver or herdsperson
Employer Description:We are a family run, forward thinking modern Dairy farm milking 580 high yielding Pedigree Holstein Friesians 3 times a day through a 40:40 Herringbone parlour. We rear our own replacements plus approx.100 beef cattle. We do all field operations ourselves (apart from Maize drilling) – so it’s generally pretty busy!Working Hours :Monday - Friday, 7.00am – 5.00pm; 1 hour unpaid breaks & Saturday, 7.00am - 1.00pmSkills: Attention to detail,Team working,Can-do attitude,Interest in dairy industry,Punctuality,Politeness,Common sence,Willingness to learn....Read more...
Workshop Fitter, £31,500 DOE, Monday to Friday, 07:00-17:00, Friday 07:00-14:30 on Friday, company wellbeing programme, death in benefit, 28 days holiday. We would welcome people to apply how may have worked as a Vehicle Bodybuilder, Trailer fitter, Vehicle Builder, Semi-Skilled Mechanic or Mechanical Assembler, Coachbuilder, Motorhome Engineer Workshop Engineer etc – Full training will be given
Location: Melksham A well-established Automotive business that specialise in Vehicle Conversions require a Assembly Fitter to join the team. The company is part of a leading Automotive group in the UK and the role has become available as the company continue their upward trajectory. Duties of the Workshop Fitter opportunity.
Following SOPs
Drilling, assembly & installing mechanical components
Installing, side panels flooring, into new Vans etc
Using hand and power tools
Benefits of the Workshop Fitter position:
A day off for your Birthday.
Enhanced Maternity and Paternity policies.
Access to the wellness programme and Employee Assistance Programmes,
Training opportunities
Death in service benefit.
20 days annual leave plus bank holidays.
Alternatively, if you would like a private chat about role Workshop Fitter position, please contact Rodger Morley at E3 Recruitment....Read more...
Workshop Fitter, £31,500 DOE, Monday to Friday, 07:00-17:00, Friday 07:00-14:30 on Friday, company wellbeing programme, death in benefit, 28 days holiday. We would welcome people to apply how may have worked as a Vehicle Bodybuilder, Trailer fitter, Vehicle Builder, Semi-Skilled Mechanic or Mechanical Assembler, Coachbuilder, Motorhome Engineer Workshop Engineer etc – Full training will be given
Location: Melksham A well-established Automotive business that specialise in Vehicle Conversions require a Assembly Fitter to join the team. The company is part of a leading Automotive group in the UK and the role has become available as the company continue their upward trajectory. Duties of the Workshop Fitter opportunity.
Following SOPs
Drilling, assembly & installing mechanical components
Installing, side panels flooring, into new Vans etc
Using hand and power tools
Benefits of the Workshop Fitter position:
A day off for your Birthday.
Enhanced Maternity and Paternity policies.
Access to the wellness programme and Employee Assistance Programmes,
Training opportunities
Death in service benefit.
20 days annual leave plus bank holidays.
Alternatively, if you would like a private chat about role Workshop Fitter position, please contact Rodger Morley at E3 Recruitment....Read more...
Recruit4staff is proud to be representing their client, a leading manufacturing company in their search for a Spot Welder to work in their leading facility in TelfordFor the successful Spot Welder our client is offering;
Hourly rate of £12.50 - £13 per hour + 20% shift allowance = £15 / £15.60Monday to Thursday 18:30pm - 04:30am, initially training on Days for 2 weeks!Temporary ongoing positionLovely company to work for3 DAY WEEKEND
The Role of the Spot Welder:
Spot Welding Drilling holes into cases/drumsRecording Spot Welding and Quality dataHighlight any quality issuesEnsuring products are Spot Welded/Fabricated to required standards
What our client is looking for in a Spot Welder:
Previous Spot Welding experience - ESSENTIALKnowledge of Manufacturing processesAble to work to high standards
Alternative job titles;Spot Welder, Spot Welding, Commutable From;Telford, Halesfield, Stafford Park, Hortonwood, Bridgnorth, Shifnal, Wolverhampton, AlbrightonFor further information about this and other positions please apply now This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business.....Read more...
Workshop Fitter Manchester £27,000 - £35,500p/a depending on experience, Monday to Friday, 07:00-16:30 (15:30 on Friday), company wellbeing programme, day off for your birthday, death in benefit, 28 days holiday.This workshop fitter role is working for a well-established company that specializes in commercial HGV body building. This role is working for a well-known, reputable company within the automotive sector. They operate in a clean modern working environment and have recently received significant investment due to a recent takeover by a large Automotive Group.We would welcome people to apply for the workshop fitter role who may have worked as a Vehicle Bodybuilder, Trailer fitter, Vehicle Builder, Semi-Skilled Mechanic or Mechanical Assembler, Coachbuilder, Motorhome Engineer, Workshop Engineer etc – Full training will be given
Duties of the Workshop Fitter opportunity.
Following SOPs
Drilling, assembly & installing mechanical components
Installing, side panels flooring, into new Vans etc
Using hand and power tools
Benefits of the Workshop Fitter position:
A day off for your Birthday.
Enhanced Maternity and Paternity policies.
Access to the wellness programme and Employee Assistance Programmes,
Training opportunities
Death in service benefit.
20 days annual leave plus bank holidays.
If you are interested in this workshop fitter role, please apply now or contact Grace at E3 Recruitment.....Read more...
Work on projects independently or as a team.
Make sure you keep workspaces tidy and safe.
Always be willing to assist other members of staff when lifting or moving scenery.
Be aware of your surroundings when Health and Safety is concerned.
Be able to solve problems and overcome challenges.
Cutting, drilling and welding metals.
Fabrication and assembly of metal parts joining techniques
Work with a variety of materials to produce scenery
Preparing materials and equipment for cutting or welding processes
Specific safe working practices, isolation procedures and safe reinstating of equipment/system that need to be observed
Join the materials using the appropriate methods and techniques
Training:
On-the-job training
Off-the-job training
Block release training to Stephenson College , Coalville
Apprentice will undertake a Level 2 Engineering Operative - Fabrication pathway apprenticeship
Training Outcome: Leading a team of engineers and project management.Employer Description:Scenic design, construction and finishing for stage and screen, Visualscene has been making scenery for the theatre industry for over 20years. Whether within our workshop or within theatres and opera houses , we pride ourselves on our vast skill and experience to recreate, build and finish scenic backdrops.Working Hours :Monday to Friday.
40 hours per week.Skills: Problem solving skills,Team working,Independent,Good Timekeeping,Flexible,Understanding of CAD drawings,Interest in Construction....Read more...
Workshop Fitter Huddersfield£14.50 an hr (DOE), Potential earnings with overtime circa £40K a year, Weekly Pay, Overtime paid at x1.5 Modern workshop, free parking, flexible working hours, (6am – 4pm/7am 5pm)Monday to Friday | Permanent PositionJoin a leading name in the automotive industry as a Workshop Fitter. This is an exciting opportunity to be part of a growing, reputable organisation known for its modern facilities and clean, well-equipped workshops.The role would be assisting with the building and conversion of Trucks and Trailers. No prior experience needed as full training will be given. However, you need to have experience using hand and power tools such as drills, grinders, saws etc.Working Hours for the Workshop Fitter - Monday - Friday, standard hours
What’s in it for you as our Workshop Fitter?
Starting salary circa £13- £14.50- an hr
Overtime available and paid at x1.5
Permanent Position
Your Role: As a Workshop Fitter, you’ll be working on vehicles, focusing on both bodywork and chassis-mounted equipment. Your daily tasks will include:
Disassembling and assembling body-mounted components
Following SOPs
Drilling, assembling, Fitting, Grinding (interior and exterior fixtures)
Carrying out light fabrication tasks – measuring, cutting, and grinding/using saws
What we’re looking for: Candidates with experience in the following areas are encouraged to apply:
Vehicle body building or coachbuilding
Mechanical engineer
Vehicle Fitter
Assembly Fitter
....Read more...
Joining the Company team as a Trainee Metal Spinner Apprentice, you will have the opportunity to learn a range of skills on the job. As part of the role you will learn the following:
Preparation and Finishing work
Cutting
Drilling
Punching
Deburring
Cleaning
Packaging
Working to drawings and job card instructions
Metal Spinning Operations
Training:As a Trainee Metal Spinner Apprentice, you will be studying a level 2 Engineering Operative Apprenticeship. Throughout your apprenticeship with Calibre, you will be supported by your company mentor and your PETA Learning and Development Coach.
You will attend PETA’s training centre based in Havant for 1 day per week for off-the-job learning.
Overall apprenticeship duration 15 months.Training Outcome:Calibre are a family run business that care about their employees. They have opportunities for apprentices to do well within their business and potentially go onto:
Becoming a skilled worker and gaining fulltime employment
Further personal development
Further academic development
Employer Description:Founded by brothers David & Kevin Hobbs in Waterlooville, Hampshire. Our customers come from across the UK and Europe, and they value our friendly yet professional approach. Our mission is to keep an ancient and skilled technique alive and well by offering both a bespoke and commercial service to our customers delivering a quality product on time.Working Hours :Monday to Thursday, 07:00-17:30. Friday, 07:00-12:00.
Hours to be confirmed for under 18's.Skills: Enthusiastic team player,Self motivated and driven,Excellent communication skills,Positive attitude,Willingness to learn,Good dexterity and hand skills,Interest in metal spinning,Good hand to eye co-ordination,Learn through instruction....Read more...
As a Mechanical Engineering Apprentice, you will learn the skills, knowledge and behaviours to be able to:
Work towards covering a multitude of skills including: machining, welding, assembly, bench fitting, pipe fitting, drawing and design
Measure components
Manual Milling/Turning/Drilling/Tapping
Quality check jobs to ensure within spec
Read engineering drawings
General housekeeping
You’ll develop your skills alongside time-served engineers who are eager to pass on their knowledge, learning a variety of duties and supporting the whole business. You’ll be taught and mentored to achieve your full potential and create the foundation of a lifelong career.Training:
The successful candidate will continue their studies with apprenticeship specialists, RNN Group.
You’ll study at the North Notts Campus (Worksop) one day per week
The qualification you will receive at the end is a Level 2 Engineering Operative (Mechanical pathway) Apprenticeship Standard
Training Outcome:
Progression to industry specialist qualifications- further and higher skill development
A lifelong career in the industry
Employer Description:Stonefield (2010) Ltd are a leading provider of pipe fittings and all engineering services. Their experience leads them to work for a variety of customers on varying projects.
Stonefield are very invested in apprenticeships and upskilling, and have a team of staff trained to a high level of expertise.......Would you like to be the next one?Working Hours :Monday- Friday
8.00am- 4:30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Logical,Team working,Initiative,Can do attitude,Ability with hand tools,Work under pressure,Able to prioritise workload....Read more...
Safe use of machinery
General manual handling of material i.e. lengths of steel
Reading of drawings
Quality Control - ensuring all production is done at the quality required
Assist with problem solving tasks
Cutting of Materials - materials must be correctly measured and cut on the machine
Machining of components (Manual and CNC turning, milling and drilling)
Working to tight tolerances
Working to production schedules and deadlines
Completion of work orders to support production – passed to dispatch at the end of each shift
Machine Equipment Checks/cleaning - check all equipment/machinery is working correctly and safety and any defects are reported, and machinery is unused until it is confirmed by tech department for safe use. Machine cleaned down at the end of each week
Training:
Machining Technician Level 3 Apprenticeship Standard
The successful candidate will spend part of their working week training at South West Durham Training, based on the Aycliffe Business Park in Newton Aycliffe
Training Outcome:
A fulltime position within the company may be offered depending on the successful completion of the Apprenticeship
Employer Description:Established in 1995, CRD Devices have built up a reputation as a reliable source for linear and rotary products, supplying to a wide range of industries and markets.
CRD supplies & specifies a full range of motion control products including; electric linear actuators, linear guideways, ball screws, screw jacks, linear motors, geared motors, gearboxes, height adjustable systems, linear motors and servo motors across a broad customer base throughout the European Community.
As well as being a stockist, with warehousing, we also have a manufacturing facility where we can give full engineering support, including: prototyping, life testing, innovative design and assistance with application solutions.Working Hours :Monday - Thursday, 8.30am - 5.00pm and Friday, 8.30am - 3.00pmSkills: Communication skills,Attention to detail,Team working,Good attitude to work,Time Management,Reliable and conscientious,Motivated to learn new skills....Read more...
The successful applicant will be given a full, well-rounded understanding of the Composites Manufacturing process, both on the shop floor, and departments which are indirectly related to production such as, Inspection, Engineering and Estimating.
During this 3½ year apprenticeship, you will learn how to interpret drawings/specifications and plan work, ensuring you have the right tools, equipment and resources to complete the task.
Fitters are required to check their work against quality standards and make adjustments as required based on their knowledge.
Duties/responsibilities will include;
Creating and assembling aerospace parts
Responsibility for maintaining the quality of aerospace parts which you have created
Checking and maintaining tools
Learning to develop a range of skills including wiring components, drilling and general fitting techniques
Working as a team to support other manufacturing departments to uphold high customer service
Removal of waste materials and keeping work area clean and tidy
Training:In-house training plus the candidate will follow a Level 3 Apprenticeship programme and study towards a Level 3 Engineering Fitter standard. This training will be structured and delivered by Cheshire College - South & West. If the candidate does not hold GCSE grades A-C (9-4) or equivalent, they will be required to complete a Level 2 Functional Skill in the relevant subject.Training Outcome:Potential for full time role upon successful completion of the apprenticeship.Employer Description:We are a fast-growing manufacturer, supplying carbon/glass fibre composite parts and assemblies to some of the world’s leading aircraft and aero engine producers. Operating across different distinct product groups namely commercial, and business jet products, this role is an opportunity to join a team putting the finishing touches to our highly technical products.Working Hours :Monday-Thursday 8.00-16:30. Friday 8.00-13.00.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working....Read more...
We are offering a 4 year apprenticeship in which you will benefit from working closely with highly skilled engineers to learn and develop manual machining skills and knowledge.
Your bespoke training will equip you with the capability to produce machined components for high specification products. Soft skills will also be developed during this period to help strengthen skills such as communication.
After successful completion of the 48-month apprenticeship, you will have enough skills and experience to make you a strong entrant to start work as a qualified member of the machining staff.
You will combine on the job skills and knowledge gained in the workplace along with off the job further education to ensure that this is achievable.
Key Accountabilities:
Operation of manual turning machines
Understanding how to use lathes to machine a wide range of different materials
Given the vast range of materials to be machined, you will learn the skills and techniques for machining each type of metal
Training:Machining Technician Level 3 Apprenticeship Standard:
3 x 5-week practical training modules in hand fitting, turning and milling
Level 3 Extended Diploma in Machining
End-point assessment
Training Outcome:
Full time position upon completion of apprenticeship
Employer Description:Clifton has a modern, purpose built, manufacturing facility with 17,000 square feet of shopfloor space, offering CNC & conventional machining, tool-making & polyurethane moulding. Accredited to BS EN ISO 9001:2015. From compact sized, high speed machines to multi-tasking CNC lathes with milling & drilling capabilities, we have a fully equipped CNC turning department with twelve machines.
We also have conventional machining capability: vertical & horizontal milling, tool-making, turning upto 530mm diameter, surface & cylindrical grinding, honing.Working Hours :Monday - Friday, 7.30am - 4.30pm and Friday, 7.30am - 12.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Field Service Engineer
Kilkenny
€35,000 - €52,000 + Door to Door Pay + Overtime + Van + Training + Family Feel Company
Currently a Field Service Engineer or have good experience working with machinery? If so, this is a fantastic chance to join a well-respected, growing company that offers technical progression - work on some of the biggest industrial machinery in the country, long-term security, and earning potential of up to €65,000 per year.
We’re offering a fantastic opportunity for a Field Service Engineer to join a well-established and growing engineering firm known for exceptional service, safety, and reliability. You'll work on advanced workshop machinery, receive full training, and enjoy strong job security in a supportive team environment.
Your Role As A Field Service Engineer Will Include:
Carry out servicing, diagnostics, and repairs on a wide range of workshop and industrial machinery
Provide on-site support to customers across Ireland and Northern Ireland
Represent a company built on quality, trust, and customer satisfaction
Enjoy autonomy on the road while being backed by a knowledgeable and friendly support team
As A Field Service Engineer You Will Have:
Engineering maintenance experience or hands-on machine operator background
A customer-first attitude with excellent communication skills
Strong problem-solving ability and self-motivation
A full driving licence
Key Words - CNC Machinery, Workshop Machinery, Field Engineer, Service Engineer, Ireland, Field Technician, Workshop Engineer, Maintenance, Machine Operator, Mobile Engineer , Kilkenny, Carlow, Kildare, Drilling, Cutting, Fabrication....Read more...
Field Service Engineer
Laois
€35,000 - €52,000 + Door to Door Pay + Overtime + Van + Training + Family Feel Company
Currently a Field Service Engineer or have good experience working with machinery? If so, this is a fantastic chance to join a well-respected, growing company that offers technical progression - work on some of the biggest industrial machinery in the country, long-term security, and earning potential of up to €65,000 per year.
We’re offering a fantastic opportunity for a Field Service Engineer to join a well-established and growing engineering firm known for exceptional service, safety, and reliability. You'll work on advanced workshop machinery, receive full training, and enjoy strong job security in a supportive team environment.
Your Role As A Field Service Engineer Will Include:
Carry out servicing, diagnostics, and repairs on a wide range of workshop and industrial machinery
Provide on-site support to customers across Ireland and Northern Ireland
Represent a company built on quality, trust, and customer satisfaction
Enjoy autonomy on the road while being backed by a knowledgeable and friendly support team
As A Field Service Engineer You Will Have:
Engineering maintenance experience or hands-on machine operator background
A customer-first attitude with excellent communication skills
Strong problem-solving ability and self-motivation
A full driving licence
Key Words - CNC Machinery, Workshop Machinery, Field Engineer, Service Engineer, Ireland, Field Technician, Workshop Engineer, Maintenance, Machine Operator, Mobile Engineer , Kilkenny, Carlow, Kildare, Drilling, Cutting, Fabrication....Read more...
Field Service Engineer
Ireland - National Patch
€35,000 - €52,000 + Door to Door Pay + Overtime + Van + Training + Family Feel Company
Currently a Field Service Engineer or have good experience working with machinery? If so, this is a fantastic chance to join a well-respected, growing company that offers technical progression - work on some of the biggest industrial machinery in the country, long-term security, and earning potential of up to €65,000 per year.
We’re offering a fantastic opportunity for a Field Service Engineer to join a well-established and growing engineering firm known for exceptional service, safety, and reliability. You'll work on advanced workshop machinery, receive full training, and enjoy strong job security in a supportive team environment.
Your Role As A Field Service Engineer Will Include:
Carry out servicing, diagnostics, and repairs on a wide range of workshop and industrial machinery
Provide on-site support to customers across Ireland and Northern Ireland
Represent a company built on quality, trust, and customer satisfaction
Enjoy autonomy on the road while being backed by a knowledgeable and friendly support team
As A Field Service Engineer You Will Have:
Engineering maintenance experience or hands-on machine operator background
A customer-first attitude with excellent communication skills
Strong problem-solving ability and self-motivation
A full driving licence
Key Words - CNC Machinery, Workshop Machinery, Field Engineer, Service Engineer, Ireland, Field Technician, Workshop Engineer, Maintenance, Machine Operator, Mobile Engineer , Kilkenny, Carlow, Kildare, Drilling, Cutting, Fabrication
....Read more...
