Senior Electronic Design Engineer
Livingston
£58'000 - £72'000 + Variety + Hybrid Working + Technical Development + Package + ' Immediate Start'
Ready to step up your engineering career and work on cutting-edge specialist products with real-world impact? This is not your average Senior Electronic design engineer office job — it’s a role where every day brings fresh challenges, exciting variety, and the opportunity to leave your mark on complex, innovative systems.
Have great stability and security working alongside industry specialists in this Senior Electronic Design Engineer role. This position is also a hybrid role with a minimum of three days in the office. You will benefit from working within different sectors of the engineering world including Life Sciences, Renewables and Sub Sea.
Your Role As A Electronic Design Engineer Will Include:
Leading and contributing to the electronic design of specialist, bespoke systems — no two projects are the same
Producing detailed schematics, wiring diagrams, and technical documentation
Working across low voltage control, power distribution, PCB design, or electromechanical systems depending on your strengths
Collaborating closely with mechanical, software, and manufacturing teams for full product lifecycle involvement
Supporting the development of prototypes, testing, and production roll-outs
Mentoring junior engineers and influencing technical decisions
As A Electronic Design Engineer You Will Have:
A degree (or equivalent) in Electrical/Electronic Engineering
Solid experience in electronic design engineering, ideally in a senior or lead role
FGPA - Experience
A passion for problem-solving, technical variety, and learning new systems
Great communication skills and the confidence to drive ideas forward
Keyword: Senior Electrical Design Engineer, Design Engineer, Electrical Design Engineer, Electronic Design Engineer, Electronics Engineer, Life Sciences, Oil and Gas,Livingston, Scotland, Edinburgh ....Read more...
Electrical Shift Maintenance Engineer - Holborn, London - Up to £47,200 (£44-46k Basic + £1.2k Shift Allowance)I have a fantastic opportunities to work for a large maintenance company working in the Holborn, London working at a corporate commercial office buildings on behalf of a large property management company. You will carry out PPM's and reactive maintenance, statutory compliance and general building maintenance tasks. My client is looking for a Multi-skilled Electrical Maintenance Engineer with experience in building services to work in a High profile corporate Head office and due to the nature of the client you will be required to pass a security check. Hours4 Days on, 4 Days Off - 07:00am - 19:00pm - Days OnlyRequirementsApprentice TrainedElectrical - City & Guilds Level 2 and 3 or Equivalent17th/18th Edition2391 Test & InspectionClient FacingCommercial Building Maintenance ExperiencePackageBasic Salary of £44-46,000 + £1,200 Shift Allowance - Up to £47,200 Package22 Days Annual leave PensionHealthcarePlenty of OTInternal and External Training coursesCareer progression - would want the engineer to develop into supervisors and above.DutiesElectrical and Mechanical PPM's and Reactive maintenanceGeneral building services tasksEmergency lighting, Fire alarms, FCU's, AHU's, HVAC plant, Water treatmentThree Phase and Single Phase Systems, Building Management Systems & Electrical Monitoring.Air Conditioning & Chillers, Pumps, Motors & Variable Speed Drive.Working on a Large blue chip companies commercial officesWorking as part of a small maintenance team to deliver a great service to the clientMy client is able to interview straight away if the right candidates are available so to avoid missing out please send your CV today to Dan Barber at CBW Staffing Solutions....Read more...
Position: CTV Marine Engineer (Onboard) 4 On 4 Off
Job ID: 1848/10
Location: UK
Rate/Salary: £36,000 - £40,000 per year, pro rata, depending on experience
Benefits: Great benefits
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: CTV Marine Engineer (Onboard)
Typically, this person will be responsible for overseeing the engineering duties onboard, providing troubleshooting support, and ensuring the vessel operates efficiently while maintaining compliance with all safety standards.
HSB Technical’s client is an established and well-regarded business entity.
Duties and responsibilities of the CTV Marine Engineer (Onboard):
Diagnose and resolve technical issues promptly to ensure minimal downtime of vessel systems
Perform routine maintenance and repairs on mechanical and basic electrical systems
Keep accurate records of all maintenance, repairs, and operational logs
Monitor the performance of engines and other mechanical systems
Ensure compliance with all relevant maritime regulations and safety standards
Work effectively with other crew members and assist with the training of less experienced staff
Participate in the regular inspection and servicing of equipment onboard
Carry out all duties in accordance with STCW regulations and company policies
Qualifications and requirements for the CTV Marine Engineer (Onboard):
British / Right to Work in the UK
1-2 years experience in a similar role
Strong mechanical knowledge and experience
Basic electrical knowledge
All STCW certifications to be in date, including ENG1
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
Our client is a UK leading manufacturer within their sector and is now looking to extend their engineering division with an Electrical Maintenance Engineer. This is for one of their manufacturing sites within the Northwest area of Leicester.The basic salary is £51K with a KPI bonus plus overtime is paid at a premium of x1.5, with current OT available to circa 8,500 per annum. This totals an OTE minimum earning of £60K+The shift pattern is 5 Days On, 5 Off, 5 Nights On, 5 Off, 4 Days On, 4 Off. (06:00-18:00 / 18:00-06:00).The company is a UK leading, specialist manufacturer within its field and has a strong, well-respected reputation that’s continued for over 100 years. They are a very organised, fast paced and efficient company who have strong management structures in place along with state-of-the-art modern technology and machinery. Anyone who has the opportunity to work for this company is provided with consistent training, development opportunities and up skilling.What’s in it for you as a Electrical Maintenance Engineer
Basic salary of £51K plus a KPI bonus
TRAINING & DEVELOPMENT - Our client aims to operate to world-class standards and the successful candidate will be required to commit to a focused programme of training and development programme such as PLC training
Company pension matched to 10%
Generous holiday allowance
Overtime opportunities paid at a premium of x1.5 for those who want it.
Roles and Responsibilities of an Electrical Maintenance Engineer
Responsible for plant wide proactive and reactive Electrical Maintenance activities to ensure the optimum performance of the factory.
Carry out PPM schedules and Reactive Maintenance Activities as required.
Carry out work upon all electrical elements such as motors, invertors, safety circuits, performing basic fault finding on PLC’s etc. Extensive training will also be provided on Siemens PLC S7 TIA portal systems along with further upskilling opportunities.
To Be Successful as an Electrical Maintenance Engineer
You will need to hold the following Electrical Vocational and Technical qualifications to be considered: City and Guilds Level 3 AND BTEC Level 3 or higher with NVQ Level 3, OR be Apprentice trained to level 3 or equivalent.
Strong planned and reactive electrical maintenance experience within a manufacturing environment as an Electrical Maintenance Engineer
In return, you will be offered a truly varied role within a dynamic and a fast-paced business, providing opportunities to develop your skill sets and progress your career.....Read more...
Company vehicle, career development, 32 days holiday, discounted car lease scheme and job security are just a few perks that the service engineer will enjoy whilst working with this highly regarded and specialist engineering business. This permanent role offers a fantastic opportunity to be part of an innovative and growing organisation that places a strong emphasis on organic growth and career development.The successful candidate will play a key part in supporting with installations, delivery and maintenance across the M62 corridor.With the HQ based in Leeds, the company is easily accessible from surrounding towns and cities, including Huddersfield, Bradford, Wakefield, Barnsley, and York.Key Responsibilities of the Service Engineer
Completing electrical installation and commissioning works in line with the company and clients’ standards.
Carrying out inspecting, testing and production, and also completing quality documentation.
Carrying out commissioning activities of LV electrical systems, instrumentation and control systems which include MCC’s and associated field equipment.
Ensuring that all drawings, test records and telemetry schedules are marked up and passed onto the relevant team.
Experience/ Skills required:
Previous experience working within electrical engineering.
Previous experience working with panel wiring, programming VSDs and fault finding.
Understanding of electrical regulations equipment, installation and verifications.
Previous experience working with control panels.
Previous experience working away from home (Preferred)
Working Hours of the Service Engineer
Monday To Friday.
07:00-16:00 OR 08:00-17:00.
In Return, the Service Engineer will receive:
Basic Salary: £43,000-£47,000 (Dependant on Experience).
Overtime available paid at premium.
Company vehicle available.
32 holidays per annum.
Access to company car lease scheme.
Discounted retail platforms.
To apply for this position, please click “Apply Now” and attach a copy of your CV. Alternatively, please contact Ismail Ahmed at E3 Recruitment.....Read more...
Field Service Engineer Woking£35,000 to £40,000 Basic + Overtime + Bonus + Door to Door (£48,000 OTE) + Specialist Training + Package Be part of a highly skilled installation and maintenance team for the best company in their industry, whilst earning a realistic £48,000 package! You'll Increase your skills with specialist training and progression of package and responsibility, in a varied field service engineer role covering a regional area. This scientific equipment manufacturer supplies the education, medical, and technical industries providing their specialist products. Their initial training program will increase your skill level and support you through industry specific qualifications. You’ll have the opportunity to earn £48,000+ in an interesting field service engineer role. Your Role As Field Service Engineer Will Include: * Home based field service engineer role covering a regional / local area with some occasional stay away required (1/2 times a month) * Installation and servicing of mechanical / electrical equipment. * Installation of ductwork for extraction systems * Covering the Woking / Farnborough / Guildford areasThe Successful Field Service Engineer Will Need To Have: * Experience as a mechanical / installation / field service engineer * A mechanical engineering bias - some basic electrical knowledge * Knowledge of extraction systems / HVAC or similar. * Must have a UK driving licence * Live around the Woking area or near and happy to travel as a field service engineerPlease apply or contact Sam Eastgate for immediate consideration Keywords: field service engineer, field installation engineer, installation engineer, service engineer, field engineer, mobile engineer, ventilation, ductwork, Air Con, HVAC, Woking, Farnborough, Guildford, Wokingham.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
The Maintenance Engineer vacancy is working with a market leading manufacturer of building products, based in the Reading area. The position offers excellent opportunities for both training and career development.What's in it for your as a Maintenance Engineer:
Hours of work 42 hours per week from Monday to Friday - based on a rotational 3 shift pattern of 8-hour days, afternoons and nights. 6 hours work is required every 3rd Saturday morning.
Salary - £57,134
Overtime at 1.5x for Monday to Saturday and 2x for Sundays and bank holidays
Service Bonus
KPI Bonus
Excellent pension company contribution, plus employee benefits package
Training and career development opportunities
26 days holidays plus bank holidays
Main Duties & Responsibilities of Maintenance Engineer include:
Ensure the continuous running of the production process by eliminating downtime through a safe and logical approach to fault finding and maintenance of equipment.
You’ll be involved in a variety of tasks, ensuring a proactive approach to preventing equipment failure. Working on various types of equipment including complex hydraulic, pneumatic, and electrical/electronic control systems, you’ll be responsible for carrying out a range of planned and reactive activities on site.
Monitor & supply support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineer Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Good knowledge of Electrical / Mechanical Engineering within a heavy industrial / manufacturing environment
PLC programming skills with knowledge of Allen Br
Ability to fault find, repair and provide solutions to problems.
This position would suit a Multi Skilled Engineer with a recognised background in, either Mechanical or Electrical.Please apply directly for this position.....Read more...
Job Title: Maintenance EngineerLocation: HuddersfieldSalary: Up to £44,000 per annum (negotiable based on experience) + Call-out rate (£35/hour)Working Hours: 44 hours per week (Monday–Thursday 8:00 AM – 6:00 PM, Friday 8:00 AM – 5:00 PM)Benefits:
24 days annual leave + 8 statutory bank holidays (pro-rata)Workplace pension schemeIncreased company sick pay with length of serviceAdditional annual leave with length of service
Job Overview:We are currently seeking a skilled and proactive Maintenance Engineer to join a well-established manufacturing facility. This role is essential in maintaining the mechanical and electrical installations across the site to ensure optimal machine uptime, reduce downtime, and improve manufacturing processes. The ideal candidate will have experience in electrical and mechanical maintenance, be comfortable working in a fast-paced environment, and have a strong commitment to health, safety, and legal compliance.Principal Duties and Responsibilities:
Perform maintenance and repair on both mechanical and electrical systems within the site.Ensure all equipment and installations meet current legal and health and safety standards.Collaborate with other engineering staff to assist in the building and modification of equipment.Proactively contribute to preventative maintenance schedules, particularly for factory machinery and forklift trucks.Identify and implement improvements to manufacturing practices in collaboration with the lean manufacturing team.Respond quickly and efficiently to machine breakdowns, minimizing downtime caused by electrical and mechanical issues.Complete prescribed safety checks on machinery and equipment accurately.Provide breakdown cover outside of normal hours as required.Liaise with suppliers and order spare parts as needed.Assist with the maintenance of the building and office environment.Complete project work across mechanical, electrical, and fabrication tasks.Maintain and update computer-based systems tracking machine performance and maintenance schedules.Help establish and maintain engineering department standards, including risk assessments and 5S auditing.Undertake other duties as required, commensurate with the role's responsibilities.
Skills and Qualifications:
Electrical Qualifications: Must hold electrical qualifications (18th Edition, Level 3 in Electrical Installation, or equivalent).Mechanical Experience: Strong background in mechanical maintenance, including pumps, bearings, valves, pipework, pneumatics, welding, and more.Electrical Skills: Experience with electrical systems, fault finding, and repairs.Health and Safety: Knowledge of current health, safety, and legislative requirements.Problem Solving: Ability to troubleshoot and resolve mechanical and electrical breakdowns efficiently.Experience: Proven experience working in an engineering environment, ideally within manufacturing or a similar sector.Flexibility: Willingness to work outside normal hours and participate in call-out duties when required.Communication: Strong communication skills for liaising with suppliers, team members, and management.
Additional Information:
The successful candidate will be provided with in-house training, though proactive learning and self-development are essential.The role offers opportunities for career progression depending on aptitude, ability, and the company's business plans.Equal Opportunity: The employer is committed to promoting equality, fairness, and dignity in the workplace, eliminating all forms of discrimination.
To Apply:If you are an experienced Maintenance Engineer with a strong mechanical and electrical background and looking to further your career in a dynamic and supportive environment, please submit your CV and details for consideration.Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.
....Read more...
The Role: Commissioning Engineer
Salary up to £55k DOE
33 Days Holiday (Incl stats)
Company Pension
PPE Supplied
Company Values Reward Scheme
My client is looking to recruit a controls biassed commissioning engineer, to form part of a dedicated team whose primary focus is to transition our automated equipment from completion of build through to customer inspection and sign-off. Managing Projects through to completion playing a large part in this role.
The Company
My client provides bespoke turnkey automation solutions offering their customers a complete one stop solution - from design to delivery.
Key Responsibilities
The following list is an indication of roles and responsibilities you will be expected to undertake as a successful commissioning engineer. The list is not exhaustive and intended as guidance only. Individual tasks vary depending on the type of technical support you are providing, but in general, you'll need to:
- Programme and modify control systems using PLCs, Servo drives, Robots, and other specialised controllers specific to customer requirements.
- Troubleshoot & adjust mechanical, electrical, pneumatic and controls equipment.
- Fault finding and operational assessment of mechanisms both in isolation and in complex form.
- Modifying systems through electrical, mechanical, pneumatic or software means to enhance performance.
- Identify opportunities to improve a system with a view to presenting these to other team members.
- Perform tests, using structured processes, to build a defined understanding of a mechanisms limitations.
- Record test results in suitable manner such that they can be used to support the necessity/direction of further work.
- Ensure records of all modifications are documented correctly.
- Provide proactive feedback to the project team to enable project progress to be determined.
- Participate in internal design reviews on existing or potential projects.
- You may be required to attend and work at customer premises throughout the UK and overseas.
The Right Person
The successful Commissioning Engineer will have the relevant vocational training or will have completed a recognised apprenticeship in an electrical or mechanical discipline as well as possessing the following attributes and skills:
- Experience programming Programmable Logic controllers (PLC), and Human Machine Interfaces (HMI) using software such as Allen Bradley, Mitsubishi, Festo, Codesys, Siemens.
- Knowledge of setting up Servos, VFDs, Remote I/O, Ethernet and Profibus networks.
- Proven electrical, pneumatic, or mechanical experience within the automation industry.
- Ability to follow electrical and pneumatic schematic diagrams and drawings.
- Knowledge of 6 Axis Robot systems is preferred.
- Knowledge of script-based programming would be an advantage.
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionsearch.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPTP....Read more...
An exciting opportunity has arisen with a market-leading chemical manufacturing company for the position of Service Engineer, with a primary focus on the installtion projects within the Industrial Laundry industry. This field based role places the successful candidate at the heart of the laundry division across the United Kingdom & Ireland, joining a dynamic and evolving workforce that has been at the forefront of chemical manufacturing for over 70 years!
To be successful as a Service Engineer, candidates must bring strong technical expertise particularly in handling equipment such as heat exchangers, water and energy recovery systems, steam systems and PLC control processes. The Service Engineer will be instrumental in supporting key projects and delivering on-site service at customer facilities.
Responsibilities of the Service Engineer:
Install and maintain all aspects of water and energy recovery systems, including mechanical and electrical components, with the ability to provide technical troubleshooting as needed.
Conduct site visits to assess, optimise, and enhance water and energy equipment at customer locations.
Ensure all necessary risk assessments, method statements, and flow diagrams are completed before commencing work on-site.
Commission water and energy equipment to the agreed specifications.
Manage small- to medium-scale projects, ensuring installations meet or exceed best practice standards.
Perform site surveys and technical visits, both independently and alongside contractors to assess project feasibility and scope.
Maintain comprehensive project documentation.
Qualifications Required for the Service Engineer:
Experience in a similar installation or project based role is essential to be successful as the Service Engineer.
Electrical Qualifications (18th Edition is desirable)
Previous experience in an industrial/commercial laundry setting or within the water treatment industry is highly desirable.
The role requires national travel across the UK & Ireland, with overnight stays when necessary.
In addition to a competitive salary, the Service Engineer will benefit from a comprehensive package such as Company Car, Company Pension (4% contribution with 5% company contribution), additional annual leave days accrued for length of service, and an annual discretionary bonus! If you believe you have the right skill set and experience for the role, please click on the link below to apply directly!....Read more...
Hydraulic Engineer Up to £16 an hr, DOE permanent position, Overtime paid at x1.5, Addional benefits after completing probation period, Death in Service Benefit, Health Cash Plan – Including discounts at gyms and retailers,25 Days Holiday + 8 Bank Holidays, Free parking, Death in Service Benefit.A multi-national company located in the Leeds/Bradford area require a hydraulic or Mechanical Engineer. The role would consist of testing of installations incorporating hydraulic, pneumatic and electrical components. The successful candidate would be required to meet completion times to the required quality standards.Responsibilities of the Hydraulic Engineer
Working by procedures and/or Engineering instructions
Testing equipment
Adherence to European and company health and safety procedures
Working with members of Sales teams to ensure customer specifications are achieved
Ensuring all products meet all necessary quality requirements
Maintaining all necessary documents and records required by the company quality systems
Reporting any defects and quality issues immediately to the production supervisor/quality engineer
Maintaining a high standard of housekeeping
Key requirements for the role
Previous experience with hydraulic, and pneumatic components/systems
Working knowledge of electrical systems (Desirable)
Ability to understand Technical drawings and schematic circuit diagrams.
Previous experience of mechanical fitting on Vehicles (Desirable).
Willingness to undertake minor reworking of installations if required.
Benefits of the Hydraulic Engineer position:
Up to £16 an hr DOE
Company Pension Contribution
Health Cash Plan – Including discounts at gyms and retailers
Death in Service Benefit
25 Days Holiday + 8 Bank Holidays
Free Parking
Death in Service Benefit
If you would like a private chat about the role, please contact Rodger Morley at E3 Recruitment.....Read more...
Role: Electrical Engineer
Location: Birmingham
£Great + Company Bonus & Benefits (Undisclosed at client request. Happy to disclose when we speak)
Hours: Mon-Fri 38.75hrs/wk
Our client, a leading international manufacturer, is currently recruiting for an experienced Electrical Engineer to join their site in Birmingham at a time of huge growth for the business.
As an Electrical Engineer, you will be part of a multi-skilled maintenance team that works together as a flexible and professional unit. You will be required to assist with both breakdown and preventative maintenance across the site safely and professionally.
Duties include:
- Adhere to all safety rules and requirements at all times.
- Carry out routine daily preventative maintenance checks.
- Work alongside the Production Team Leaders, Shift Technicians and Operators, reporting findings to your Departmental Team Leader.
- Take responsibility for any specific area as required to understand its operation and fully understand the maintenance requirements and safe systems of work for that area.
- Ensure that all tasks are accompanied by the relevant supporting documentation (work orders, risk assessments etc.).
- Carry out all non-planned and planned maintenance tasks promptly.
- Be a front-line point of communication for Production Team Leaders, Shift Technicians and Operators during maintenance activities.
- Be actively involved in projects of improvement, extension or modification of equipment to optimise efficiency, reliability and safety.
What we are looking for:
- HND/HNC Electrical Engineering (Essential)
- Previous experience in heavy industry and an understanding of 3-phase control systems
- Knowledge of PLC fault-finding
- Knowledge of Isolation Procedures
- Knowledge of Hydraulic/Pneumatic/Mechanical systems
- Knowledge of continuous improvement techniques.
- Attention to detail with the ability to analyse problems and action solutions.
- Excellent communication skills both written and oral.
- Ability to self-organise, prioritise work and adhere to deadlines.
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit. If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page. This does not need to be formatted in the same manner. In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word. Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy. KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Multi Skilled Engineer Day based Permanent role SALARY: £40-43K DOE Location Somerset Wet Wipe Manufacturing My client is a wet wipe manufacturer in the Somerset area looking to recruit a multi skilled engineer to increase their engineering team. This is a fantastic opportunity to work with a wide array of Process, Converting and Packaging equipment in a day based role in the heart of Somerset. The position will require both electrical and mechanical know-how, a hands on engineer with a multi-skilled capability is preferable. This is a Day based, two shift engineering position, working 6am-2:15pm or 2pm-10:15 pm Mon -Friday The successful Engineer duties include: ·Plan and carry out Reactive and Planned Preventative Maintenance on site ·Resolving day to day issues / problems Mechanical and Electrical. ·Provide innovative technical solutions to manufacturing problems primarily through the specification, sourcing and installation of appropriate machines or equipment. ·Sourcing of spare parts both mechanical and Electrical. ·Design modifications for existing equipment when necessary. ·Determine the cost/efficiency benefits of alternative machinery and make suitable recommendations ·Produce detailed costings of engineering projects. Experience/ Qualifications: ·Good and relevant experience in the Converting and Packaging industry. ·Good engineering disciplines and controls and an excellent applied knowledge of relevant engineering, health and safety standards, legislation and regulations. ·All applicants must have a time served fully indentured apprenticeship. ·Engineering qualification - HNC / NVQ (minimum of HNC). ·Knowledge of CAD systems would be preferable ·Good communication skills. ·Ability to make decisions using own initiative. ·Knowledge of electrical control system, PLC, Inverter, motors and sensors would all be beneficial. ·Excellent problem solver who is proactive in recommending and implementing actions to solve issues or improve ways of working. This role would ideally suit a candidate that has previously worked as an Engineer, Maintenance engineer, Multi Skilled and is commutable from Bridgwater, Taunton, Cheddar, Highbridge, Honiton, Yeovil, Glastonbury, Street, Shepton Mallet, Langport ....Read more...
Installation Engineer
Hertfordshire
£38,000 - £45,000 Basic + OTE & Bonus 50K upwards + Van + Fuel Card + Training and development opportunities + Private Health Care + Holidays + MORE!
Join a well-respected and long-established specialist contractor as an Installation Engineer, working across a regional patch with occasional travel beyond. An excellent opportunity to be part of a skilled and supportive team where you’ll be more than just a number.
This organisation has built a strong reputation over more than a decade, recognised for delivering outstanding service and rewarding its engineers for quality work and dedication. As part of the installation team, you’ll be involved in a variety of commercial projects, working both independently and collaboratively. In return, you'll benefit from a stable, family feel company that will provide you all the necessary tools to develop your career.
The role as an Installation Engineer will include:
* Installing equipment on commercial and residential sites * Working on refrigeration and air conditioning systems * Working with a team of engineers to deliver work to a high standard and up hold health and safety on site * Providing technical support for customers
The successful Installation Engineer will need:
* FGAS qualification * Electrical or Mechanical background * Driving licence * Commutable around Hertfordshire
Please apply or contact Matthew Oladele on 07458 163042 for immediate consideration
Keywords: Installation engineer, Installation, Refrigeration, air conditioning, fgas, Aircon, field service engineer, engineer, mechanical engineer, electrical engineer, construction, Bishop's Stortford, Hertfordshire, Watford, Hemel Hempstead, Welwyn Garden City, Stevenage, Harlow....Read more...
Electronics Test Engineer - Schematics
A fantastic opening is available for a skilled Test Engineer – Schematics to become part of a renowned organisation involved in the design, development, and production of advanced electronic systems. This role, located in Ipswich, Suffolk, presents an excellent opportunity to contribute to cutting-edge projects across multiple sectors, particularly in embedded electronics and microcontroller-based systems.
In this role, you will play a pivotal part in the engineering team, focusing on validating and verifying electronic schematics and ensuring functionality and compliance with project and industry standards.
The Test Engineer – Schematics, based in Ipswich, Suffolk, will be responsible for:
Reviewing, analysing, and testing electronic schematics to ensure correctness and functionality
Collaborating closely with hardware design engineers to validate circuit designs prior to PCB layout and manufacturing
Developing test plans and procedures tailored to schematic-level verification and functional testing
Identifying and debugging design issues using lab equipment such as oscilloscopes, logic analysers, and multimeters
Supporting schematic capture validation in tools such as Altium Designer or similar
Ensuring designs meet relevant EMC, safety, and performance standards through structured test methodologies
Working with cross-functional teams to suggest improvements to designs based on test outcomes
The successful applicant for the Test Engineer – Schematics job in Ipswich, Suffolk, will have:
Strong background in electronics or electrical engineering, with a focus on schematic design and validation
Hands-on experience in testing and debugging electronic circuits, including analog, digital, and mixed-signal systems
Familiarity with tools like Altium Designer for reviewing schematics and collaborating on design changes
Understanding of EMC compliance, signal integrity, and electrical safety considerations
Proficient with lab equipment and test automation tools for circuit validation
To apply for this role please send your CV to NDrain@redlinegroup.Com or call Nick on 07487756328 / 01582878828....Read more...
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
An exciting opportunity has arisen for an Industrial Door Engineer to join a well-established firm, specialising in the supply, installation, and maintenance of industrial and high-speed doors. This full-time role offers salary range of £30,000 - £50,000 and benefits.
As an Industrial Door Engineer, you will assist in the installation and repair of Industrial doors such as roller shutters, speed doors, sectional doors, fast action doors, garage doors, and car park barriers.
You will be responsible for:
? Loading bay equipment.
? Conducting fault diagnostics (mechanical and electrical).
? Carrying out planned and reactive maintenance.
? Offering appropriate solutions based on site needs.
? Participating in an occasional on-call rota.
What we are looking for:
? Previously worked as a Industrial Door Engineer, Door Fitter, Door Engineer, Shutter Engineer, Roller Shutter Engineer or in a similar role.
? Background in servicing and repairing industrial doors or automated access systems.
? Excellent electrical and mechanical knowledge.
? Valid UK driving licence.
What's on offer:
? Competitive salary
? 28 days holiday
? Company pension
? Bonus scheme
? Company van
? Employee discount
? Free parking
? Overtime availability
? Health & wellbeing programme
Apply now for this exceptional Door Engineer opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is....Read more...
Recruit4staff are representing a well-established facilities management business in their search for a Commercial Gas Engineer to work in LiverpoolJob Role: Mobile role across the North West carrying out heating and combustion maintenance, reactive repairs, and PPM works. Tasks include working on commercial and industrial boilers, burners, air handling units, and radiant heating equipment. Fault diagnosis and repair will include basic electrical fault finding and minor plumbing work. The role also includes stock control, domestic installations, and participation in an on-call rota.Job Details:
Pay: Up to £43,000 per annum (Depending on experience)Hours of Work: Monday to Friday, 40 hours a week, variable start times (Days)Duration: PermanentBenefits:
Enhanced overtime rates after core hours20 Days annual leave + bank holidaysCompany van & fuel cardStructured call out (1 in 5)£100 stand-by allowanceCompany iPadFlue gas analyserContinued training programmes – technical and personalFull uniform
Essential Skills & Experience:
Fault finding and breakdown repair of commercial heating plantService and maintenance of heating plantService and maintenance of plumbing systemsPPM and reactive maintenance
Desired Skills & Experience:
HVAC service & maintenanceElectrical service & maintenanceBuilding fabric maintenance
Essential Qualifications:
ACS Commercial Gas ticketsACS Domestic Gas ticketsFull Driving Licence
Desired Qualifications:
ACS Commercial Catering ticketsOftec Oil ticketsF-Gas Category 1Electrical Engineering tickets
Commutable From: Liverpool, Wirral, Chester, Widnes, Runcorn, St Helens, WarringtonSimilar Job Titles: Combustion Engineer, Commercial Heating Engineer, HVAC Engineer, Gas Engineer, Boiler Engineer, Commercial Gas Engineer, Combustion Technician, Gas TechnicianFor further information about this role, please apply now.This vacancy is being advertised on behalf of Recruit4staff, who are operating as a recruitment agency.....Read more...
Position: Design Engineer
Job ID: 2299/13
Location: Oxfordshire ??
Rate/Salary: £40,000 - £45,000
Type: Permanent
Benefits:
25 days holiday + Bank Holidays
3-day Christmas shutdown
Pension scheme (4% employee / 5% employer contribution)
Performance-related bonus scheme
Social clubs and employee engagement events
Cycle to work scheme (tax-free)
Employee assistance programme for financial and wellbeing support
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy, and Subsea sectors – visit: www.hsbtechnical.com for a list of our current vacancies. We are proud to represent a wide range of businesses across the UK and overseas, supporting their recruitment for both permanent and contract roles.
The below job description will outline this position of: Design Engineer ???
Typically, this person will work within a vibrant and fast-paced Design Office, playing a key role in the development of high-quality, innovative products. This includes both mechanical and electrical assemblies used in the automotive and marine sectors. The successful candidate will have a strong technical foundation and a practical engineering background, enabling them to contribute effectively to new product development, continuous improvement initiatives, and daily technical support across departments.
HSB Technical’s client is an established and well-regarded business entity known for its engineering excellence and dynamic workplace culture.
Duties and responsibilities of the Design Engineer:
Design and engineer complex assemblies combining mechanical, electrical, and moulded components (GRP and other materials)
Collaborate with cross-functional teams to support new development projects from concept to pre-production
Provide technical support to internal departments including production, sales, and quality
Liaise with external suppliers on technical and component-related matters
Create, maintain, and control engineering drawings, technical documentation, and Bills of Materials (BOMs)
Participate in hands-on prototype building and on-water product testing
Contribute to continuous improvement efforts within both product design and assembly line processes
Support decision-making processes by offering design input and innovative engineering solutions
Qualifications and requirements for the Design Engineer:
Degree-qualified (or equivalent) in Mechanical or Design Engineering, with a minimum of 5 years of experience in a similar role
Highly proficient in 3D CAD software (preferably Siemens NX), with strong skills in component and assembly modelling, and detailed drawing creation
Experience working with mechanical systems, including drivetrains and fabricated parts in steel, aluminium, and plastics
Understanding of moulded parts and tooling processes; ability to develop laminate schedules is a plus
Familiarity with fluid and/or electrical systems is advantageous
Practical, problem-solving mindset with the ability to work hands-on when needed
Prior experience in the marine industry is beneficial, though not essential
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
Electrical Maintenance Engineer / Improver – Chiswick Park, West London - Up to £38,000 Per AnnumExciting opportunity to work for an established FM Property company based in Chiswick Park, West London. I am currently recruiting for an Electrical maintenance engineer / improver to be based at a commercial building in Chiswick Park, West London. The successful candidate will be a fully qualified Electrical Maintenance Engineer / improver with a proven track record in commercial / property building maintenance. He or she will be required to carry out M&E planned and reactive maintenance covering all Landlord services.Working with the maintenance team on site, He or she will be required have an understanding/hands on experience of the below. In return the company are offering a competitive salary, overtime and the chance to work at this very unique and interesting site.Emergency lightingElectrical Fault Finding and Remedial worksHVAC MaintenanceAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsGeneral building fabricHours of work Monday to Friday, Split Days - (40 hour week)Week 1 - 07:00am to 16:00pm Week 2 - 09:00am to 18:00pmRequirementsElectrical qualified - You must be able to provide copies of your trade certificatesCity & Guilds / NVQ Level 2 17th / 18th EditionA proven track record in commercial or property maintenance Excellent customer service skillsHappy to cover a large site Honest, hard working and reliablePackageUp to £38,000 per annumOvertime available 20 days holiday + BHCompany PensionPlease send your CV to Dan Barber for more Information!....Read more...
Electrical Maintenance Engineer - Sittingbourne - Temp - FM Service Provider - up to £25 per hour Are you a Electrical Maintenance Engineer looking for a new challenge? Are you looking for work in and around Sittingbourne ? Are you looking for temporary work? If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Sittingbourne. CBW is currently looking for a Electrical Maintenance Engineer to be based in a commercial building. The successful candidate will be Electrically biased (NVQ, C&G) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out Electrical and fabric maintenance to the following. Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work / Rate / contract detailsMonday - FridayStarting monday 28th April8am - 5pmup to £25p/h1 month tempRequirements Electrically qualified - City & Guilds Level 2&3 and 18th edition etc Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceGood communication skillsClient FacingImmediately available or able to start at short notice If you are interested please email your CV to Cammie@cbwstaffingsolutions.com or contact to Cammie at CBW Staffing Solutions for more information.....Read more...
Electrical Maintenance Engineer - Central London - Temp to perm - FM Service Provider - £25 per hour Are you an Electrical Maintenance Engineer looking for a new challenge? Are you looking for work in and around Piccadilly ? Are you looking for temporary work? If the answer is yes, then read on...A Fantastic opportunity to work for a leading FM Service Provider situated in Central London. CBW is currently looking for an Electrical Maintenance Engineer to be based in a commercial building. The successful candidate will be Electrically biased (NVQ, C&G) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out Electrical and fabric maintenance to the following. Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work / Rate / contract detailsMonday - Friday8am - 5pmStarting ASAP£25p/h - ( paid via umbrella only )Temp to permRequirements Electrically qualified - City & Guilds Level 2&3 and 18th edition etc Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceGood communication skillsClient FacingImmediately available or able to start at short notice If you are interested please email your CV to Cammie@cbwstaffingsolutions.com or contact Cammie at CBW Staffing Solutions for more information.....Read more...
The Opportunity Insignis Talent are currently seeking an Electronics Engineer to join the Calibration & Maintenance Team of a leading multinational defence firm on a 12-month contract. This role is a fantastic opportunity for a skilled engineer to work within an experienced team supporting complex test platforms involved in the manufacture and testing of advanced systems. As an Electronics Engineer, your responsibilities will encompass:
Servicing and supporting Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE).
Performing fault finding and repair tasks down to component level.
Supporting routine calibrations and commissioning of test equipment.
Conducting drift analysis and assisting with the calibration of equipment covering a wide range of technologies, from DC to Microwave.
Interpreting technical documentation including instructions, handbooks, drawings, or specifications to guide maintenance and repairs.
Providing technical guidance and mentoring to junior staff when required.
Role Requirements: To excel in this role, candidates should possess:
Minimum qualification: HNC or HND in Electrical & Electronics Engineering.
Solid experience in the calibration and maintenance of test equipment and systems down to component level.
Strong understanding of calibration principles and processes.
Capability to manage multiple priorities and resolve issues concurrently.
Analytical thinking and problem-solving skills.
Effective verbal and written communication skills, adaptable to various audiences.
Ability to work from technical documentation to perform accurate measurements and repairs.
A good understanding of SAP (desirable).
Experience working with Environmental Chambers (advantageous).
Please note: Due to the sensitive nature of the work, successful applicants must be able to satisfy a UK SC clearance check.....Read more...
Senior Power Electronics Engineer – Battery Chargers
Are you a Senior Power Electronics Engineer with strong experience in high-power design, looking to work on innovative battery charging systems?
Our client, a global leader in green energy tech, is expanding their specialist R&D team in Glasgow, Scotland. This is a hybrid role with a clear path to senior level and the chance to shape next-gen power solutions across sectors like robotics, defence, and industrial systems.
Key Responsibilities for this Senior Power Electronics Engineer job are:
Design and develop single/three-phase high-power battery chargers for industrial use.
AC to DC power conversion for smart energy and automation systems.
Work with semiconductors, magnetics, and control theory to create efficient, robust design.
Use lab tools (oscilloscopes, dataloggers, CAD, MRP) for prototyping and testing.
Requirements for this Senior Power Electronics Engineer job are:
Senior level experience in power electronics design and control.
Expertise in LLC, phase-shift converters, active PFC, and high-power topologies.
Hands-on lab and simulation experience.
Industry background in defence, data centres, rail, or traction is a plus.
Degree in Electrical/Electronic Engineering or similar.
To apply for this Senior Power Electronics Engineer role, please send your CV to NDrain@redlinegroup.Com or call 01582 878828 / 07487 756328.....Read more...
Redline are working alongside an Essex-based client who are an industry renowned designer and developer of unique and advanced technology, in their search for a Contract Systems Engineer – Compliance.
Our client has a significant presence in various highly regulated industries operating across a wide range of different projects, including aerospace, defence and medical. They are looking for someone who can hit the ground running on the second iteration of one of their existing products. You will be required to be on site at least 4 days a week with 1 day working from home available.
Key skills required, Contract Systems Engineer – Compliance, Essex:
- Strong experience in a systems engineering role, focusing on electronics/electrical compliance
- Experience of defence standards (MIL)
- Experience with global compliance standards (CE, UKCA etc.)
Due to the nature of the work, BPSS clearance is required as a minimum with SC Clearance potentially being needed.
This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company.
For more information or to apply for the Contract Systems Engineer - Compliance, opportunity based in Essex, please contact Laura Preston – Lpreston@redlinegroup.Com / 01582 878823 quoting reference LMP1026....Read more...
