JOB DESCRIPTION
The Process Engineer is responsible for evaluating and improving processes within Stonhard manufacturing operations. Additionally, the Process Engineer is responsible for implementation of continuous improvement initiatives, capital project support, production efficiency, maintenance process improvements, and equipment reliability.
Essential Functions
Lead root cause analysis for process failures. Develop and maintain standard work instructions. Develop and maintain Process Failure Mode Effect Analysis for areas of responsibility. Improves production line efficiency to show a measurable increase in OEE. Support maintenance in equipment troubleshooting. Working knowledge of I/O, PLC, and 24V controls is preferred. Programming a plus. Experience with Manufacturing Execution Systems preferred. Design and coordinate fabrication of manufacturing support components. Support day-to-day production operations. Re-engineer existing equipment to meet new optimization, reliability, safety, throughput, and process requirements. Evaluate and make recommendations, which will increase output and decrease costs by addressing/improving workflow, ergonomics, time/motion characteristics, cycle-times, set-up times, waste, etc. Confer with management and general staff to implement plans and recommendations. Ensure CI project goals are met and sustained through the development of effective control plans. Ensure Continuous Improvement processes and procedures are followed and adhered to through auditing and process confirmation practices. Lead C.I. initiatives in areas of 5S, Waste Reduction, Value-Stream Mapping, etc. Ensure appropriate validations are completed as part of solution implementation. Downtime Loss Analysis and Reduction - Start-up & Changeovers downtime improvement Equipment failure (Structured failure analysis 5W's, Fishbone analysis)
Minimum Requirements
Bachelor's degree in engineering Lean and/or Six Sigma preferred but not required. Minimum 5 years of manufacturing experience preferably in a GMP environment.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk and reach with hands and arms. The employee is occasionally required to sit; stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.Apply for this ad Online!....Read more...
We are seeking a Joiner for an immediate start, to join a well-established, PLC listed, leading manufacturer at its Thornley site. Working regular days Monday to Friday, either 07:00 - 15:00 or 08:00 -16:00, with plenty of overtime available paid at a premium of x 1.5 or x 2.
This is a temporary position, with an opportunity to go permanent. What’s in it for you as a Joiner - £15.73 per hour (minimum, could pay more dependent on experience) - Hours of work: Monday – Friday: either 07:00 - 15:00 or 08:00 -16:00 - Overtime available and paid at a premium of 1.5x and 2x - Location: Thornley - Immediate start - Temporary to permanent opportunity. Key Responsibilities of the Joiner - Creating items from wood and other materials, for example mould boxes - Refurbishing items, for example mould boxes - General woodworking maintenance tasks around the factory - Ordering and management of all materials required for the mould making - Adhering to health & safety, quality and environmental systems. Experienced Required of the Joiner - Practical, hands-on ability - Ability to read and understand CAD / GA drawings to reverse engineer moulds - Ability to operate woodworking machines, Kappa saw/spindle moulder/panel saw/planner etc. - Wood working safety training - General H&S awareness. If interested, apply now…....Read more...
Job Title: Director of engineering - Luxury property Location: Lisbon, Portugal Salary: €60,200 gross per annum + bonusA luxury lifestyle hotel in a busy city-centre location is seeking a Chief Engineer to lead its engineering and maintenance function. The property operates under a major international hotel group and features 150+ guestrooms and multiple dining outlets. The Chief Engineer will report directly to the Operations Manager / General Manager and oversee a team consisting of an Engineering Supervisor and four Engineers.Key Responsibilities
Lead all engineering, technical, and maintenance operations within the hotelEnsure full compliance with safety, legal, brand, and operational standardsOversee preventive maintenance programs and manage all building systemsGuide and support the engineering team, promoting strong performance and a safety-driven cultureManage relationships with contractors, suppliers, and brand representativesSupport overall hotel operations by maintaining high service and efficiency levels
Candidate Requirements
Proven experience within major international hotel brands (e.g., global luxury or lifestyle groups)Background in luxury or luxury lifestyle hotelsPortuguese or Spanish fluency is essentialAdvanced English required due to the international nature of the leadership teamStrong leadership skills and experience managing engineering teams in dynamic, high-footfall environmentsPre-opening experience is beneficial but not required
Job Title: Director of engineering - Luxury propertyLocation: Lisbon, PortugalSalary: €60,200 gross per annum + bonusIf you would like to have more information about the role, please apply or send your cv to maria@corecruitment.comGet social…….http://www.corecruitment.com/ https://www.facebook.com/COREcruitmentDOTcom/ Tweet us @COREcruitment ....Read more...
Electrical Maintenance Engineer - Fareham, Hampshire - Up to £38,000Exciting role to join a Leading National Maintenance Service provider that is looking to expand its operation and bring in a specialised Electrical maintenance engineer in the Fareham area. You will be joining their current Electrical team working across various high-end buildings carrying out PAT testing, maintenance and repairs on electrical equipment. You will be responsible for all commercial electrical maintenance as well as general building services. Hours of WorkMonday to Friday 8am to 5pm BenefitsBasic Salary of up to £38,000Monday to Friday 8am to 5pm25 days holidayFull company uniformPensionLife AssuranceEmployee Shares SchemesReward programme & Employee programmeEmployee discounts.Overtime to boost up your earnings RequirementsBS7671 18th edition qualificationKeen eye for detailIPAF 3A & 3B (essential) Basic mechanical knowledge (Desirable but not essential) L3 Electrical 2391, at least a few years experience with electrical works, If they are also multi-skilled great but isn't essential Previous experience in the manufacturing sector (Desirable but not essential) IT literateResponsibilitiesTo undertake routine PPM tasks in accordance to recognised standardsTo undertake reactive repairs as requiredTo undertake Electrical Installation work as requiredUndertake regular inspectionsTo co-operate with other disciplines for the provision of multi-discipline services where requiredOn occassion, be available to carry out necessary emergency works outside normal hoursTo attend training to assist with contract requirementsEnsure all documentation is completed correctly for all tasks and reactive tasks are reported and recorded on to the CAFM system.To undertake tasks as instructed by on site FMPlease send your CV today to Joe Mann at CBW Staffing Solutions to avoid missing the opportunity....Read more...
Electrical Maintenance Engineer - Fareham, Hampshire - Up to £38,000Exciting role to join a Leading National Maintenance Service provider that is looking to expand its operation and bring in a specialised Electrical maintenance engineer in the Fareham area. You will be joining their current Electrical team working across various high-end buildings carrying out PAT testing, maintenance and repairs on electrical equipment.You will be responsible for all commercial electrical maintenance as well as general building services.Hours of Work:Monday to Friday 8am to 5pmBenefits:Basic Salary of up to £38,000Monday to Friday 8am to 5pm25 days holidayFull company uniformPensionLife AssuranceEmployee Shares SchemesReward programme & Employee programmeEmployee discounts.Over time to boost your earnings Requirements:BS7671 18th edition qualificationKeen eye for detailIPAF 3A & 3B (essential) Basic mechanical knowledge (Desirable but not essential) L3 Electrical 2391, at least a few years experience with electrical works. If they are also multi-skilled great, but isn't essential.Previous experience in the manufacturing sector (Desirable but not essential) IT literateResponsibilities:To undertake routine PPM tasks in accordance to recognised standardsTo undertake reactive repairs as requiredTo undertake Electrical Installation work as requiredUndertake regular inspectionsTo cooperate with other disciplines for the provision of multi-disciplinary services where requiredOn occasion, be available to carry out necessary emergency works outside normal hoursTo attend training to assist with contract requirementsEnsure all documentation is completed correctly for all tasks and reactive tasks are reported and recorded on to the CAFM system.To undertake tasks as instructed by on site FMPlease send your CV today to Bailey White at CBW Staffing Solutions to avoid missing the opportunity....Read more...
HIU Engineer - FM Service Provider - Mobile - High End Residential Properties - London - Up to £48,000 + Package Exciting opportunity to work for an established FM service provider situated in London. CBW are currently recruiting for a Heat Interface Unit Engineer (HIU) to carry out planned and reactive maintenance to HIU units, across a number of residential properties in and around London. The successful candidate will have a proven track record with HIU maintenance and a proven track record working in commercial or high end residential properties. In return the company is offering a competitive salary paying up to £48,000 based on experience and a travel card.Key duties & ResponsibilitiesComplete an annual service of all residential apartments/properties involving: PPM, Reactive and Servicing on the heat interface units (HIU)Maintaining thermal stores, unvented cylinders, Air heat pumpsReplacing pumps in the plant roomsRemedial works on the HIUGeneral plumbing bleeding radiators, cylinders,HIU MaintenanceChanging and servicing of water temp sensors etc.Bleeding radiatorsEnsure all tasks are completed within the agreed timescales, managing the workload accordingly.Demonstrate the ability to manage conflicting priorities and prioritise business needs.Consistently communicate effectively, in an appropriate manner, whilst building and maintaining positive working relationships, both internally and externally.Hours of workMonday to Friday - 08:00am to 17:00pmRequirementsHIU Maintenance experience (Essential)Excellent communication skillsHonest, reliable and hard workingA positive attitude towards work and willingness to get tasks completed on time whilst managing conflicting deadlinesHappy to work a on either a Mobile or Foot Mobile basisIMPORTANT - This role is focussed on HIU service/Maintenance only Highly desirableCity and Guilds Qualified (or equivalent) Plumber (Not Essential)Experience working in high end residential propertiesHIU - CoursesPlease send your CV to Daniel Barber for more Information.....Read more...
Multi-skilled Mechanical Engineer - London - 4 on 4 off Days and Nights - Up to £46,000Exciting role to join a Leading National Maintenance Service provider that is looking to expand its operation and bring in a specialised mechanical engineer in and around London Bridge.You will be joining their current Mechanical Engineering team working across various high-end buildings carrying out Service and Breakdowns on mechanical plant. You will be responsible for all commercial mechanical maintenance as well as general building services. Hours of Work 4 On 4 Off Days and Nights. BenefitsBasic Salary of up to £46,0004 On 4 Off days and Nights25 days holidayFull company uniformPensionLife AssuranceEmployee Shares SchemesReward programme & Employee programmeEmployee discounts.Overtime to boost up your earnings RequirementsCity & Guilds craft certificate/ONC etc.Recognised craft apprenticeship (NVQ Level 3 or Equivalent)Two years post apprenticeship experience in a similar role.Comprehensive understanding of Building Services.C&G L3 in HVAC/Mechanical Engineering or equivalent desirableFull in depth, intrusive security checks to be completed for successful candidateResponsibilitiesResponsible to a Shift Leader for undertaking electrical/mechanical works on a wide range of building services reactive and planned maintenance throughout the London Estate.The work is undertaken on a shift basis to ensure 24hr cover for the London Estate.All shift teams to be complementary with balance of electrical and mechanical support across the sites.High standard of planned preventative and reactive maintenance. Able to use diagnostic equipment and work from technical manuals and drawings.Able to identify visual plant defects, warning lights and indicators.Comprehensive understanding of building services and proficient in maintenance of: Power, distribution and switching, Motors controls, Lighting systems, Stand by generators, Electrical test procedures and certification, Controls systems, Inverter operation and design, Fire alarm/PA systems.Please send your CV today to Joe Mann at CBW Staffing Solutions to avoid missing the opportunity....Read more...
Electrical or Mechanical Maintenance Engineer – FM Service Provider – Commercial Building (Tennant areas) – Fenchurch Street, London – up to £49,000 per annum CBW Staffing Solutions are currently recruiting a Multi Skilled Maintenance Engineer with either electrical or mechanical bias to be based on a commercial office building in Fenchurch Street, London. He or she will be required to carry out planned and reactive building maintenance across the site as part of a 4 man working team. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of up to £49,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of up to £49,000Monday to Friday – 07:00am – 16:00pm / 09:00am – 18:00pm rotating weekly25 days holiday plus bank holidaysOvertime availableCompany Pension SchemeExcellent career progression opportunitiesKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsWater flushing / temp checks logsBoosted water pumpsFire damper maintenanceAttending Client meetingGeneral PPMsControl of sub-contractorsPermit to work systemMaintaining Site logbooksRequirementsElectrically or mechanically qualified - Level 2 or 3City & Guilds - 18th EditionJob logic experience (Preferred)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Junior Mobile Air Conditioning Engineer - Sutton - £41,812It is an exciting role to join a Leading National Maintenance Service provider looking to expand its operation and bring in a junior Commercial Air Conditioning and refrigeration engineer to supply this service on a pharmaceutical contract in Sutton. This role would be perfect for someone who has recently gained qualifications or has little experience in Commercial Air Conditioning. You will be joining their current Mobile maintenance team carrying out Service and Breakdowns on Air conditioning, HVAC and refrigeration plant. You will be responsible for all commercial Air conditioning maintenance as well as general building services across the Chelsea & Sutton area. Hours of Work Monday - Friday 08:00 am -17:00 pm.RequirementsNVQ Level 2 Refrigeration & Air conditioning (Minimum)NVQ Level 3 Refrigeration & Air conditioning (Desirable)Fgas 2079 Cat 1 (Essential)Experience within a Maintenance / Facilities Management environment.Knowledge of Health & Safety, permit-to-work procedures and safe systems of working.Capability to perform manual tasks, including manual handling, working at heights and in confined spacesOn-Call Rota.Good verbal and written communication is important, including the ability to use a mobile device.Self motivated and solutions-focused with the ability to work without supervision but also enjoy working as part of a team.Full Drivers LicenseEnhanced DBS checkBenefitsBasic Salary of up to £41,81224 days holiday + Bank HolidaysCompany Vehicle + Fuel CardFull company uniformPDA and Mobile phoneCallout 1 in 4ResponsibilitiesPPM & Reactive maintenanceAir conditioning and refrigeration - Service/maintenanceYour main duties will be service and maintenance on split systems, VRV's, VAV's and VRF's, AHU's, FCU's, Chillers and all HVAC and refrigeration plant.Electrical Knowledge would be beneficial.Extensive building services knowledgePlease send your CV today to Archie Reed at CBW Staffing Solutions to avoid missing the opportunity....Read more...
Pump Engineer – FM Service Provider – London (Foot Mobile) – £48,000 to £54,000 Exciting opportunity to work for an established FM service provider based in London. CBW are currently recruiting for a Pump Specialist Engineer to work across seven high-end residential buildings, the majoity of which are in the Canary Wharf area with one being in South West London. The successful candidate will have a strong proven track record in servicing, repairing, and fault-finding on pumps, degassers, BCWS sets and pressurisation units. In return the company is offering a competitive salary of up to £54,000, overtime and further technical training. Package & Working Hours£48,000 – £54,000 (depending on experience)£160 per month travel allowanceOvertime availableMonday to Friday, 08:00 – 17:0025 days holiday + bank holidaysFurther specialist trainingCompany pensionKey ResponsibilitiesServicing, maintenance and fault-finding on:Pressurisation units: IMI, Flamco, Grundfos, WiloDegassers: IMI, Flamco, Grundfos, WiloLTHW & CHW pumps: Grundfos, Wilo, LowaraBCWS pump sets: Grundfos, Wilo, LowaraCarrying out pump repairs, replacements and system remediation.Diagnosing complex issues across pump and pressurisation plant.Supporting closed-loop and domestic water systems when necessary.Completing service and maintenance reports.General mechanical plant support across sites.RequirementsStrong experience with pumps, pressurisation units, degassers, and BCWS sets.Mechanical/plant background with solid fault-finding skills.Experience working across LTHW/CHW systems.Ability to carry out plant repairs and replacements.Full UK driving licence (foot mobile but may require occasional vehicle use).Excellent knowledge of manufacturers such as Grundfos, Wilo, Lowara, IMI and Flamco.If you are interested in this role please contact Alex Denton from CBW Staffing Solutions....Read more...
Mechanical Maintenance Engineer - Hammersmith - Commercial Office - Client Facing - Up to £45,000 Exciting opportunity to work for an established FM Property company based near Hammersmith. CBW are currently recruiting for a Static Mechanical Maintenance Engineer to be based at a prestigious commercial office building based near Hammersmith station. My Client is a well established FM provider that is privately owned and has 20+ years of experience providing a range of hard FM services across London and the home counties. They specialise within, mechanical, electrical engineering, Air Conditioning and Refrigeration. The site is a well know commercial office that is located 5 minutes away from Hammesmith station. Some of the lines that connect to Hammersmith are - Circle, Hammersmith & City, District line. Within the building it is a 10 store state of the art building with brand new equipment. This building is a cooperate head office building holding one of the biggest companies in the world.In return, the company is offering a competitive salary of up to £45,000, plenty of overtime available, 26 days holiday + Bank holidays, further training and further career progression, call outs are required, 3% pension. Key Duties & ResponsibilitiesMonitor the mechanical plantPumps, Motors, Seals, BearingsPressurisation UnitsCooling TowersChillersAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment Monitor the BMS systemsBasic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsDoing reactive worksHours of workMonday to Friday (40 hour week)8am to 5pmRequirementsMechanically / Plumbing qualified - You must be able to provide copies of your trade certificatesA proven track record in commercial or property maintenanceInstallation experienceExcellent customer service skillsHappy to cover a large siteHonest, hard working and reliablePlease send your CV to Joe Mann at CBW Staffing Solutions to avoid missing out on this opportunity! ....Read more...
FPGA Firmware Electronics Engineer – Defence – Cambridge
We are currently seeking an experience Electronics Engineer to join a multidisciplinary team of engineers that assist in the development of brand-new technologies for the Defence sector, with a focus on defence rather than offence.
These technologies can encompass communications, sensors, detection, and other complex technologies within the Defence sector. As you will be working on defence projects, you will need to be able to obtain (or already hold) security clearance.
As a smaller defence company, there is more flexibility in the projects you get to work on. Collaboration with other teams and external groups mean that you will have the opportunity to develop your skills and continuously learn new things while inventing exciting technologies.
Experience with FPGA Firmware, such as VHDL or Verilog, will be ideal. If you already work in the Defence sector, this would be advantageous, however, we are more than happy to consider candidates from other sectors.
With the growth of this company, future career development will be available for those who want to advance their career. As the company are looking for a few people in this team, we are also open to individuals who want to focus on their job while maintaining an interest in new technologies and fields.
It is expected that you would hold a degree in an electronics engineering field that has led you into a career in electronics engineering, with exposure to FPGA exposure.
Due to the varied nature in this role, I anticipate a lot of interest from individuals who want to continue developing their skills while finding the work interesting. If you are interested in this role, I suggest submitting an application now or avoid missing out.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonuses, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now or avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Mechanical Engineer – FM Service Provider – Health-care Environment - No Call outs – Guildford Surrey – up to £42,000 per annumCBW Staffing Solutions are currently recruiting an Mechanical Engineer to join a leading health-care campus in Surrey. This site is a modern, state-of-the-art facility with multiple specialist areas and cutting-edge equipment.You will be part of a small, skilled team of 3 engineers who know the site inside out and will help you get up to speed quickly. The campus supports a large workforce and offers excellent amenities including multiple food outlets and break areas, ensuring you have everything you need during your working day.This is a fantastic opportunity to work in a supportive, collaborative environment, maintain complex electrical systems, and gain experience across a variety of high-tech facilities Package:Up to £42,00025 days holiday + Bank holidaysovertime OpportunitiesParking on site No call outs Monday to Friday 8-5pm Further training Career ProgressionKey duties & responsibilitiesMaintain, troubleshoot, and repair hospital HVAC systems, including air-handling units, chillers, boilers, and ventilation systems.Ensure proper temperature, humidity, and airflow in critical areas such as operating rooms, ICU, isolation rooms, and laboratories.Oversee maintenance of plumbing systems, hot water systems, pumps, and medical gas infrastructure.Monitor and optimise performance of the hospital’s central plant, including chillers, boilers, cooling towers, and heat exchangers.Manage energy use and contribute to efficiency improvement strategies.Work closely with facilities management, clinical departments, bio-medical engineering, and contractors.Provide technical guidance to maintenance staff and contractors on mechanical system issues.Escort sub-contractors around site.to make sure the maintenance and log books are filled out correctly.Requirements:Strong understanding of mechanical systems such as HVAC, plumbing, heating/cooling equipment, pumps, and ventilation.Level 2 or 3 in mechanical engineering Previous experience in a hospital, medical facility, or critical-care environment preferred.Knowledge of Steam boilers, chillers, heat exchangers, and central plant operationsGeneral Knowledge of mechanical systems.Plumbing, hot water systems, and sanitation infrastructurePlease send your CV to Joe Mann of CBW Staffing Solutions to avoid missing out on the role!....Read more...
Shift Engineer – Continental Shift (Days & nights) – Commercial Building (Tennant areas) – Liverpool Street, London – £53,000 Per annum My client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in Liverpool Street, London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the maintenance team on site (team of 4), He or she will be required to carry out electrical, and mechanical maintenance across the tenant areas of the high rise commercial building. In return, the company offers a competitive salary of £53,000, further training and career progression. Package£53,000 per annumUniform and Tools ProvidedCycle to work scheme20 days holidayOvertime AvailablePensionInternal Progression & DevelopmentHours of workContinental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified level 3 or Mechanically qualified level 2(C&G, NVQ etc)18th edition (If electrically qualified)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf you are interested, please get in contact with Alex Denton of CBW Staffing solutions!....Read more...
Electrical Maintenance Engineer – FM Service Provider - Commercial Office Building (Tennant Areas) – Liverpool Street, London – £45,000 - NO Call out An exciting opportunity to join an established FM service provider based in Liverpool Street, London has arisen! CBW Staffing Solutions are currently recruiting an Electrical Maintenance Engineer based in a commercial building in Monument, London. He or she will be required to carry out planned and reactive maintenance across the tenant areas of this commercial office building. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of up to £45,000, overtime, further training and a potential route into further career progression. Package & working hoursA basic salary of up to £45,000Monday to Friday - 08:00 am - 17:00 pm25 days holiday + Bank HolidaysCompany Pension SchemeExcellent career progression opportunitiesKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsCompliance and logbooksChillers and pressurisation unitsUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified - City & Guilds Level 2&3City & Guilds - 18th EditionMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Electrical Maintenance Engineer – FM Service Provider - Healthcare environment – Putney, South West London – £39,000 +PackageAn exciting opportunity to join an established FM service provider based in Putney, South West London has arisen! CBW Staffing Solutions are currently recruiting an Electrical Maintenance Engineer based in a healthcare environment in Putney, South West London. He or she will be required to carry out planned and reactive maintenance across this commercial building.The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of up to £39,000, overtime, further training and a potential route into further career progression.Package & working hoursA basic salary of up to £39,000Monday to Friday - 10:00 am - 19:00 pm25 days holiday + Bank HolidaysCall out 1 in 5Overtime availableCompany Pension SchemeExcellent career progression opportunitiesKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsCompliance and logbooksChillers and pressurisation unitsUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified - City & Guilds Level 2&3City & Guilds - 18th EditionPrevious approved person experienceMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Engineering, Facilities and Maintenance Manager is responsible for directing all engineering activities and for maintaining and upgrading the facilities and production equipment. In addition, this position is responsible for maintaining/ advancing of a viable and visual Preventative Maintenance Program.at the facility and identifying capital requirements for the annual capital plan. Responsibilities also include developing and assisting in value stream design and implementation of lean principles and tools within the manufacturing environment. This includes, but is not limited to, assisting with value stream mapping, employee training, continuous improvement event facilitation, waste identification and elimination, problem solving (through the scientific method), work area and station design and layout, visual control implementation, material flow, progress tracking and communication. Acts as a passionate advocate for a cultural change toward lean thinking throughout the organization.
ESSENTIAL DUTIES & RESPONSIBILITIES: Partner with LEAN leadership in eliminating unplanned production interruptions. Use DAKOTA as the compliance tool to report incidents, near misses and non-conformances and to maintain compliance with EH&S Work with the maintenance crew to implement the needed preventative measures. Recommend design modifications to eliminate machine or system malfunctions. Prepare capital projects for submission to management. Included are costs, schedule, JHA, PHA, and procedures needed. Serve as lead project engineer for approved capital projects with the goal of on time and on budget completion. Develop and administer a viable and visual Preventative Maintenance Program that reduces downtime and improves overall reliability of production and production supporting machinery. Responsible for identifying capital requirements for the facility's annual capital plan and budget. Direct, review, and approve product design and changes consistent with MOC procedures. Recruit departmental employees; assign, direct, and evaluate their work; and oversee the development and maintenance of staff competence. Analyze annual site utility expenditure and develop plans to optimize plant efficiency to reduce costs (ISO 14001). Perform administrative functions such as reviewing and writing reports, approving expenditures, enforcing rules, and making decisions about the purchase of materials or services. Integrate the plant PHA initiative with the appropriate capital projects. Investigate equipment failures and difficulties to diagnose faulty operation, and Interface with leadership, operators, and maintenance to develop needed TPM programs. Support SPC, DOE's, and other Quality initiatives. Lead Engineer for the production processes. Develop facility infrastructure upgrade plan Other duties as assigned
EDUCATION
Engineering Degree Required
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Apply for this ad Online!....Read more...
Senior Critical Shift Engineer – Continental Shift - St Paul's, London - £63,000 + package Location: Critical Building, St Pauls, LondonSalary: Up to £63,000 per annum Overview:Our client is seeking a qualified Senior Critical Shift Engineer to join the maintenance team of a critical commercial building in St Paul's, London. The ideal candidate will comes from a strong critical background and hold electrical qualifications (C&G / NVQ). This role offers hands-on electrical and multi-skilled work, with opportunities for further training and career progression. Package Includes:Salary up to £63,000 per annumUniform and tools suppliedCycle to Work Scheme20 days holiday Plenty of overtime Overtime opportunitiesPension schemeInternal progression and development opportunitiesHours of Work: Continental Shift:4 nights on / 4 off / 3 days on / 3 nights on / 6 off / 4 days onShift times: 07:00 – 19:00 / 19:00 – 07:00Key Duties & Responsibilities:Electrical maintenance including lighting, fault-finding, small installations, lamping, ballast changes, control panels, and power distributionEmergency lighting inspections and maintenanceConduct complex electrical fault-finding and rectification across power distribution, control panels, and essential services.Adhere to the Safe System of Work (SSoW) for HV and critical low-voltage operations.Perform scheduled maintenance, fault-finding, and load-testing on Static and Rotary UPS systems and associated battery banksChiller re-sets and first-line troubleshootingWater treatment monitoring (temperature checks)BMS system monitoring (hot & cold checks)Perform all allocated tasks professionally and within allocated timeframesProactively identify, report, and resolve faults with building services equipmentMaintain health & safety compliance, reporting/escalating issues where requiredMaintain clear communication with client staff and site management regarding service issuesEscort specialist subcontractors when requiredBe flexible with site attendance and tasks within competencyRequirements:Electrically qualified (C&G, NVQ, or equivalent)18th Edition Wiring Regulations knowledgeBackground working in or with critical systems (Essential)Ability to provide trade certificates (essential)Current or expired High Voltage approved personProven track record in commercial building maintenanceMulti-skilled (electrical, mechanical, and general building services)Strong communication and customer service skillsMust be able to attend site for a 07:00 am startInterested candidates should contact: Alex Denton – CBW Staffing Solutions....Read more...
Electrical Shift Engineer – Continental Shift - Liverpool Street - £56,000 + HV Training Location: Commercial Building, Liverpool Street, LondonSalary: Up to £56,000 per annum Overview:Our client is seeking a qualified Electrical Shift Engineer to join the maintenance team of a high-rise commercial building in Liverpool Street, London. The ideal candidate will hold electrical qualifications (C&G / NVQ) and have experience in commercial building maintenance. This role offers hands-on electrical and multi-skilled work, with opportunities for further training and career progression. Package Includes:Salary up to £56,000 per annumHV training providedUniform and tools suppliedCycle to Work Scheme20 days holiday Plenty of overtime Overtime opportunitiesPension schemeInternal progression and development opportunitiesHours of Work: Continental Shift:4 nights on / 4 off / 3 days on / 3 nights on / 6 off / 4 days onShift times: 07:00 – 19:00 / 19:00 – 07:00Key Duties & Responsibilities:Electrical maintenance including lighting, fault-finding, small installations, lamping, ballast changes, control panels, and power distributionEmergency lighting inspections and maintenanceAir Conditioning: AHUs and FCUs (filter changes, cleaning, basic maintenance)Chiller re-sets and first-line troubleshootingWater treatment monitoring (temperature checks)Monitoring mechanical plant, pumps, motors, and plumbing (unblocking toilets, minor repairs)BMS system monitoring (hot & cold checks)Perform all allocated tasks professionally and within allocated timeframesProactively identify, report, and resolve faults with building services equipmentMaintain health & safety compliance, reporting/escalating issues where requiredMaintain clear communication with client staff and site management regarding service issuesEscort specialist subcontractors when requiredBe flexible with site attendance and tasks within competencyRequirements:Electrically qualified (C&G, NVQ, or equivalent)18th Edition Wiring Regulations knowledgeExperience in large commercial buildingsAbility to provide trade certificates (essential)Proven track record in commercial building maintenanceMulti-skilled (electrical, mechanical, and general building services)Strong communication and customer service skillsMust be able to attend site for a 07:00 am startInterested candidates should contact: Charlie Long – CBW Staffing Solutions....Read more...
Supporting with the delivery of delegated elements of annual business plan and outcomes to deadlines and budget
Assisting the Design Manager to present design review data/key performance indicators (KPIs) to project and sub-function leadership
Working with team members providing operational delivery of team/regional strategy of work winning activities
Assisting to ensure management system and whole project roles and responsibilities are followed
Assisting and contributing to activities reported in management reviews, collating, analysing, and presenting data and key metrics
Providing general administration to support the effective operation of design management within a project team
Working collaboratively towards the common goal of net zero carbon transition
Training Outcome:You will become a Civil Engineer chartered by the Institution of Chartered Engineers (ICE).Employer Description:At Mace, we are global experts in shaping the built environment. From development and consultancy, to construction and operations, we connect expertise across the entire property lifecycle to help our clients, people, communities and society achieve more than they believe is possible.
You can see our impact everywhere: from skylines that form cities around the world to the infrastructure that communities depend on to live, work and play.Working Hours :Monday - Friday. Typical hours are 9.00am - 5.00pm, but this may be varied due to the changing demands of a project you may be on.Skills: Attention to detail,Problem solving skills,Team working,Creative,Initiative....Read more...
Assist in the installation of bathroom suites, including toilets, basins, showers, baths, and associated pipework.
Support senior fitters with plumbing tasks such as pipe fitting, soldering, and basic fault-finding.
Learn and assist with carpentry tasks including stud work, boxing-in, and fitting bathroom furniture.
Support tiling activities: surface preparation, cutting tiles, mixing adhesives, and grouting.
Assist with flooring installation, sealing, and general finishing work.Maintain a clean and safe working environment on all job sites.
Help load, unload, and organise materials, tools, and equipment.Follow health and safety policies, including proper use of PPE and safe working practices.
Communicate professionally with customers and represent the company positively at all times.
Attend all required apprenticeship training and complete coursework on time.
Training:
Waltham Forest College 707 Forest Road, Walthamstow, London, E17 4JB.
On-site in college.
1 day a week.
Training Outcome:Qualified Plumber or Heating Engineer.Employer Description:0800 Homefix Services LTD are a fast growing Plumbing & Heating services company.
0800 Homefix is built on a team of highly experienced Gas Safe Engineers, dedicated to keeping your home running smoothly. Specialising in Plumbing, Heating, and Drainage, we bring years of hands-on expertise to every job. Our commitment is simple – fast response times, effective & reliable solutions, as well as exceptional customer service you can count on.Working Hours :Monday to Friday, 9am to 5pm, shifts, may work evenings and weekends.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Physical fitness....Read more...
Mechanical Shift Maintenance Engineer - 4ON 4OFF (Days only) - London, Mayfair - £48,000 per annum + PackageAn exciting opportunity to join an established building services company based in Mayfair. CBW Staffing Solutions are currently recruiting for a Mechanical Shift Maintenance Engineer to be based in a commercial building located in the heart of Mayfair. The building has 8 floors with around 225,000 square footage and includes office space, gym and high end residential apartments with easy access to both stations Green park (Jubilee line and Victoria line), Bond street (Central line, Jubilee line and Elizabeth line). The successful candidate will be mechanically qualified (C&G, NVQ or apprenticeship trained) with a proven track record in commercial building maintenance. Working alongside a team of 4, you will be required to carry out PPM & Reactive maintenance across both the landlord and tenant areas.Hour of work4ON 4OFF - DAYS ONLY 07:00am to 19:00pmKey Duties:Deliver PPM and reactive maintenance through the PPM system, ensuring faults are resolved quickly and equipment remains operational.Maintain required spare parts and complete accurate maintenance records/job sheets.Prepare and follow Method Statements and Risk Assessments to ensure safe working practices.Carry out lighting and emergency lighting maintenance, including small installations, fault-finding, and component replacement.Service AC systems (AHUs, FCUs), support basic chiller resets, and perform water treatment temperature checks.Monitor and maintain mechanical plants, pumps, and motors.BMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issues to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Escort specialist subcontractors around sitePackageBasic salary of £48,000 per annumPrivate health careSeason ticket reduction on train fare25 days annual leaveOvertime availableRequirementsHave an understanding of HVAC workloads and issuesMust have excellent customer facing skills to include an understanding of customer related issues.Mechanically qualified - City & Guilds, NVQ or Apprentice trainedIdeally Computer literate with a working knowledge of MS office system/BMSA proven track record in commercial building maintenanceMust be able to provide copies of your trade certificatesBe fully aware of relevant Health and Safety and general legislative mattersIf interested and would like to know more, please contact Dylan Briggs from CBW Staffing solutions. ....Read more...
M&E Shift Maintenance Engineer – Continental Shift (Days & nights) – Commercial Building – Liverpool Street, London – £53,000 Per annum My client is looking for an Electrical or Mechanical Shift Engineer to be based in a prestigious commercial building, located in Liverpool Street, London. This building offers a modern, high-end class A office space, approximately 875,000 sq ft of area spread across a total of 45 floors and all within walking distance to major transport hubs, including Liverpool Street, Aldgate Station, Fenchurch Street, Monument Station and Bank Station. The Building also offers access to multiple different communal areas, including: a variety of restaurants, cafes, a fitness studio and shops - great for after-work socialising or even a simple lunch break. You will be required to carry out electrical and mechanical maintenance across the tenant areas of the high-rise commercial building, all while working within a 4-man maintenance team. The successful candidate will be electrically or mechanically qualified (C&G / NVQ), with a proven track record in commercial building maintenance. In return, the company offers a competitive salary of £53,000, plenty of overtime available, 20 days holiday, uniform and tools provided, further training and further career progression. Hours of work: Continental Shift Pattern - 4 nights, 4 off, 3 days, 3 nights, 6 off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & Responsibilities: Perform Electrical and Mechanical PPMs and reactive maintenance tasks.Ensure all systems comply with statutory requirements and operational standards.Carry out maintenance on key systems, including HVAC plant, fire alarms, emergency lighting, water treatment, air conditioning, and chillers.Work with three-phase and single-phase electrical systems, Building Management Systems (BMS), and electrical monitoring systems.Maintain pumps, motors, Variable Speed Drives, and other critical mechanical systems.Provide top-tier maintenance support within a high-profile corporate office environment.Collaborate with a small team to deliver exceptional service to the client.BMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issues to the site management team for formal communication with the client.Remain flexible concerning site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort sub-contractors Requirements: Electrically qualified level 3 or Mechanically qualified level 2 (C&G, NVQ etc)18th edition (If electrically qualified)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledExcellent communication and customer skills If you are interested, please get in contact with Bailey White of CBW Staffing Solutions!....Read more...
Vehicle Technician - Tunbridge Wells - Vehicle Technician
Location - Tunbridge Wells
Job Title - Vehicle Technician
Salary - £30,000 - £35,000 OTE £50,000
We have an exciting opportunity for an experienced Vehicle Technician to join a prestige dealership in Tunbridge Wells now. Looking for Level 3 qualified candidates with knowledge of general servicing and diagnostics.
The Vehicle Technician role comes with a Basic salary can range from £30,000 - £35,000 with an OTE of up to £50,000 + fantastic opportunities for progression.
Key Vehicle Technician Roles and Responsibilities:
- Undertake maintenance, service and repair activities on motor vehicles to the highest standard
- As the Vehicle Technician you will carry out all work completely and effectively whilst adhering to manufacturers scheduled times to maintain efficiency
- Effectively record details of diagnosis, work completed, and components utilised in line with group and manufacturer standards
Minimum Vehicle Technician Requirements:
- Qualified to NVQ level 3 (or equivalent)
- Have at least 2 years experience after a qualifying period, of working in a Dealership as a Vehicle Technician (or similar)
- Must have a Driving License
If you want to hear more about the Vehicle Technician role, please send us your CV by clicking apply now or by contacting Rachael on 07885881841 or send your up to date CV to rachael.mortimer@holtrecrutiment.com to discuss further.
Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.
We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter
Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.....Read more...
Assist in the installation of bathroom suites, including toilets, basins, showers, baths, and associated pipework
Support senior fitters with plumbing tasks such as pipe fitting, soldering, and basic fault-finding
Learn and assist with carpentry tasks including stud work, boxing-in, and fitting bathroom furniture
Support tiling activities: surface preparation, cutting tiles, mixing adhesives, and grouting
Assist with flooring installation, sealing, and general finishing workMaintain a clean and safe working environment on all job sites
Help load, unload, and organise materials, tools, and equipmentFollow health and safety policies, including proper use of PPE and safe working practices
Communicate professionally with customers and represent the company positively at all times
Attend all required apprenticeship training and complete coursework on time
Training:
Plumbing and domestic heating technician Level 3 (A level)
Waltham Forest College 707 Forest Road, Walthamstow, London, E17 4JB
On-site in college
1 day a week
Training Outcome:
Qualified Plumber or Heating Engineer
Employer Description:0800 Homefix Services LTD are a fast growing Plumbing & Heating services company.
0800 Homefix is built on a team of highly experienced Gas Safe Engineers, dedicated to keeping your home running smoothly. Specialising in Plumbing, Heating, and Drainage, we bring years of hands-on expertise to every job. Our commitment is simple – fast response times, effective & reliable solutions, as well as exceptional customer service you can count on.Working Hours :Monday to Friday, 9.00am - 5.00pm, shifts, may work evenings and weekends.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Physical fitness....Read more...
