We are looking for a Senior Electronic Design Engineer to join development team in Oxford. Reporting to the Hardware Development Manager
Key Responsibilities
Electronic Design of a range of hardware products, calibration devices and synchronisation and networking equipment.
Working alongside, and sometimes leading, teams comprising of electronic, mechanical and software design engineers in the creation of high performing and cost effective solutions.
Key skills
Key requirements are high speed digital design, a working knowledge of analogue design and experience of developing products for manufacture with an emphasis on DFM/DFT.
A working knowledge of VHDL/FPGAs, image sensors, optics, Ethernet and RF Design would be advantageous.....Read more...
Electrical & Mechanical Shift Maintenance Engineer – Kensington, London - £50,000 (Basic) + £5,000 Shift Allowance (Total Package £55,000) We have a fantastic opportunity for a skilled Electrical & Mechanical Shift Maintenance Engineers to join a leading maintenance company in the heart of Kensington, London. This position involves working at a prestigious event space/building for a renowned property management company, ensuring the smooth running of high-profile estate. You will be responsible for carrying out Planned Preventative Maintenance (PPMs), reactive maintenance, statutory compliance, and general building maintenance tasks. Hours: Continental Shift Pattern:Days: 07:00 AM – 19:00 PMNights: 19:00 PM – 07:00 AMJobs Available:2 x Mechanical Shift Engineers2 x Electrical Shift EngineersKey Responsibilities:Perform Electrical and Mechanical PPMs and reactive maintenance tasks.Ensure all systems are in compliance with statutory requirements and operational standards.Carry out maintenance on key systems, including HVAC plant, fire alarms, emergency lighting, water treatment, air conditioning, and chillers.Work with three-phase and single-phase electrical systems, Building Management Systems (BMS), and electrical monitoring systems.Maintain pumps, motors, Variable Speed Drives, and other critical mechanical systems.Provide top-tier maintenance support within a high-profile corporate office environment.Collaborate with a small team to deliver exceptional service to the client.Requirements:Apprentice-trained and experienced in building services.City & Guilds Level 2 & 3 in Electrical or Mechanical (or equivalent).Must hold the 17th/18th Edition of the IET Wiring Regulations.DBS ClearanceClient-facing experience is preferred.Commercial building maintenance experience is a must.Familiarity with electrical and mechanical systems like FCUs (Fan Coil Units), AHUs (Air Handling Units), and chillers.Package & Benefits:Basic Salary: £50,000 + £5,000 Shift AllowanceTotal Package: £55,00022 Days Annual LeavePension and Healthcare benefits.Overtime opportunities for additional earnings.Access to internal and external training courses.Excellent career progression opportunities, with the potential to move into supervisory roles and beyond.How to Apply: If you're looking for an exciting opportunity to develop your skills and progress within a thriving organization, please send your CV to Dan Barber at CBW Staffing Solutions. Interviews can be arranged immediately for the right candidates.....Read more...
Electrical & Mechanical Shift Maintenance Engineer – Kensington, London - £50,000 (Basic) + £5,000 Shift Allowance (Total Package £55,000) We have a fantastic opportunity for a skilled Electrical & Mechanical Shift Maintenance Engineers to join a leading maintenance company in the heart of Kensington, London. This position involves working at a prestigious event space/building for a renowned property management company, ensuring the smooth running of high-profile estate. You will be responsible for carrying out Planned Preventative Maintenance (PPMs), reactive maintenance, statutory compliance, and general building maintenance tasks. Hours: Continental Shift Pattern:Days: 07:00 AM – 19:00 PMNights: 19:00 PM – 07:00 AMJobs Available:2 x Mechanical Shift Engineers2 x Electrical Shift EngineersKey Responsibilities:Perform Electrical and Mechanical PPMs and reactive maintenance tasks.Ensure all systems are in compliance with statutory requirements and operational standards.Carry out maintenance on key systems, including HVAC plant, fire alarms, emergency lighting, water treatment, air conditioning, and chillers.Work with three-phase and single-phase electrical systems, Building Management Systems (BMS), and electrical monitoring systems.Maintain pumps, motors, Variable Speed Drives, and other critical mechanical systems.Provide top-tier maintenance support within a high-profile corporate office environment.Collaborate with a small team to deliver exceptional service to the client.Requirements:Apprentice-trained and experienced in building services.City & Guilds Level 2 & 3 in Electrical or Mechanical (or equivalent).Must hold the 17th/18th Edition of the IET Wiring Regulations.DBS ClearanceClient-facing experience is preferred.Commercial building maintenance experience is a must.Familiarity with electrical and mechanical systems like FCUs (Fan Coil Units), AHUs (Air Handling Units), and chillers.Package & Benefits:Basic Salary: £50,000 + £5,000 Shift AllowanceTotal Package: £55,00022 Days Annual LeavePension and Healthcare benefits.Overtime opportunities for additional earnings.Access to internal and external training courses.Excellent career progression opportunities, with the potential to move into supervisory roles and beyond.How to Apply: If you're looking for an exciting opportunity to develop your skills and progress within a thriving organization, please send your CV to Charlie Long at CBW Staffing Solutions. Interviews can be arranged immediately for the right candidates.....Read more...
Mechanical Engineer Surveyor – Pressure & Steam Systems – Cumbria Total package cira £62K -which includes Basic £45,000-£49,000 + Company Car or Car Allowance & double matching pension + Excellent BenefitsAre you a Mechanical Engineer who is experienced in high pressure systems or steam systems or an engineer surveyor that’s interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £45,000-£49,000 with double matching contributory pension, yearly bonus and car or car allowanceThe CompanyTurnoverA well established business, draped in history, who are at the forefront of innovation in their approach to business. This innovation and work style is a key component to how they increase revenues year on year.ServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsCumbriaPackage:Getting you to work
Company Car or Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension double matchingCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays40 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Main Accountabilities:
Inspection and certification of pressure air and steam systemsBoilers, steam plant, compressors, steam turbines, pressure vessels condensers, heat exchangersAutonomy of personal diary Streamlined and simplified recording of information Maintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing relevant pressure equipment eg boilers, compressors, heat exchangers, steam plant UK Driving licenceCustomer facing skills
Engineer Surveyor – Pressure & Steam Systems – Cumbria - £45,000-£49,000 Basic Salary + Car Allowance & Excellent Benefits....Read more...
Mechanical Engineer Surveyor – Pressure & Steam Systems – Inverness Total package cira £62K - which includes Basic £45,000-£49,000 + Company Car or Car Allowance & double matching pension + Excellent BenefitsAre you a Mechanical Engineer who is experienced in high pressure systems or steam systems or an engineer surveyor that’s interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £45,000-£49,000 with double matching contributory pension, yearly bonus and car or car allowanceThe CompanyTurnoverA well established business, draped in history, who are at the forefront of innovation in their approach to business. This innovation and work style is a key component to how they increase revenues year on year.ServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsInvernessPackage:Getting you to work
Company Car or Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension double matchingCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays40 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Main Accountabilities:
Inspection and certification of pressure air and steam systemsBoilers, steam plant, compressors, steam turbines, pressure vessels condensers, heat exchangersAutonomy of personal diary Streamlined and simplified recording of information Maintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing relevant pressure equipment eg boilers, compressors, heat exchangers, steam plant UK Driving licenceCustomer facing skills
Engineer Surveyor – Pressure & Steam Systems – Inverness - £45,000-£49,000 Basic Salary + Car Allowance & Excellent Benefits....Read more...
Tudor Employment Agency are currently recruiting for a Maintenance Engineer for one of our clients based in Merseyside. We are looking for a skilled and proactive Maintenance Engineer to support operations through effective maintenance and engineering solutions. Your role will focus on ensuring the smooth running of machinery, reducing downtime, and contributing to a safe and efficient working environment. Benefits of a Maintenance Engineer:
Competitive hourly wage of £17.19 per hourOpportunities for personal and professional developmentInclusive and supportive working cultureContribution to sustainability and environmental care
⏰ Salary & Hours:
£17.19 per hour10-hour night shifts, 5 nights a week Monday to Friday Shift pattern: 20:00 – 06:00 or 21.00 - 07:00 (1 hour unpaid break)
Duties of a Maintenance Engineer will include:
Completing nightly engineering checks (fire-watch, guard checks, machine checks, emergency stops)Performing PPMs on systems and machines (conveyors, crushers, optical sorters, motors)Responding to breakdowns and completing work orders/requestsReporting defects and identifying process improvements to reduce downtimeSupporting operational efficiency and plant reliability
In order to be considered for the role of Maintenance Engineer:
Minimum NVQ Level 3 in Mechanical Engineering is essentialExperience working with conveyors is highly desirableStrong problem-solving skills and a proactive approachAbility to work independently during night shifts
How to ApplyTo be considered for this position or for further information, please contact Gina or Sam on 01922 725445 ext 1003 or 1004 or submit your CV to commercial@tudoremployment.co.uk Quote reference: TEAVEOMAI/36Applicants can also register online by clicking the link: https://tinyurl.com/0ReferralsFor information on all of our roles, please visit: http://www.tudoremployment.co.uk....Read more...
Electronic and Mechanical Senior or Principal Test Engineer required to design, build and develop a range of automated test processes for optical sensors including their test, calibration and characterisation.
Key Skills
Optical sensing
Optoelectronics or fibre optics
Strong degree or PhD in a relevant field such as Physics, Optics, Engineering etc.
Significant experience in Optical test environment
Data acquisition and processing using National Instruments Labview Product and compliance testing
Project Management or Line Management would also be ideal
Role responsibilities
Product testing from component level to product from prototype through the manufacturing process and final product test.
Data analysis, interpretation and presentation of recommendations.
Design and development of pressure, temperature and acoustic test processes for optical systems.....Read more...
An exciting opportunity has arisen for a Test Equipment Design Engineer to join an established and forward-thinking engineering team within a UK-based technology company located in Dover, Kent.
This role is perfect for a motivated and hands-on engineer with a strong background in electronic test systems, eager to work across hardware, software, and mechanical domains.
The successful Test Equipment Design Engineer in will play a key role in the design, support, and continuous improvement of automated and manual production test systems. You will be based at a modern facility in Dover, Kent, where innovation, quality, and engineering excellence drive everything the company do.
Key Responsibilities:
Support and maintain existing production test equipment (hardware and software).
Design, build, and commission new bespoke test equipment from concept through to deployment.
Develop test software (VB.NET/C#) for automation and integration with third-party instruments.
Design test fixtures for PCBA testing (ICT and FCT) and sub-assembly testing.
Calibrate and support both in-house and third-party test systems.
Qualifications:
Degree or HND in Electronic/Electrical Engineering, Mechatronics, or related field.
This is a permanent position for a Test Equipment Design Engineer based in Dover, Kent, offering a fantastic opportunity to work on meaningful and technically varied projects in a supportive and technically rich environment. If you're driven by innovation and take pride in precision engineering, we want to hear from you.
APPLY NOW to join a passionate engineering team committed to excellence. Send your CV to TDrew@redlinegroup.Com or call Tom Drew on 01582 878848.....Read more...
Assistant Plumber Harlow
£27,000 - £30,000 Basic + Company Van + Fuel Card + Tools + PPE + Pension+ OTE + Company Bonus + Training + Personal development + Stability + Immediate Start
Join a business that’s making a real difference in water quality across the UK and beyond as their next Assistant Plumber within Water Softeners. As a recognised leader in sustainable water treatment solutions, they will train you in this fast paced industry whilst paying a good package.
Due to continued growth and new contract wins, they’re looking to bring a customer-focused Assistant Plumber within Water Softeners into the team. You will be out in the field, installing, servicing, and maintaining a range of water treatment systems across commercial sites across the UK. You will have personal training and development to become a technical expert within the company.
Your Role as an Assistant Plumber Will Involve: * Installing, servicing, and repairing a wide range of water treatment products * Attending scheduled service visits and responding to reactive maintenance calls * Diagnosing and resolving technical faults on-site efficiently and professionally * Liaising directly with customers to provide updates, support, and guidanceThe Ideal Assistant Plumber will include: * Background in plumbing / or basic mechanical or electrical engineering skills * Good attitude to work, keen to learn * A full, clean UK driving licence * Strong english communication / customer service skills - you're the face of the business on-site * Commutable to Harlow, with willingness to travel across sitesPlease apply or contact Dave Blissett on 074581 42963 for immediate consideration!Keywords: Assistant Plumber, Trainee Field service Engineer, Water Softener Engineer, Water Treatment, water hygiene, plumber, Mechanical, Electrical, Harlow, Bishops Stortford, Hertford, Epping, Watford, Essex, Hertfordshire This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Junior Maintenance Engineer (Electrical or Mechanical) - FM Service Provider - Commercial Building - City of London- £35,000 - £40,000Are you looking for a way into maintenance?Are you looking for a role in Central London?Are you electrically or mechanically qualified?If the answer is yes, then read on....An exciting opportunity to join an established building services company based in London has arisen! CBW Staffing Solutions are currently recruiting a Junior Maintenance Engineer either of an electrical, mechanical, or plumbing background, to be based in a commercial building in the City of London. He or she or they will be required to carry out planned and reactive building maintenance alongside the maintenance team on site. This person will be working closely with a senior member of the team and the team on-site to gain experience and training of building services.The successful candidate will understand Facilities Maintenance and have some experience in building maintenance. In return, the company is offering a competitive salary of up to £40,000, overtime, plenty of further training and a potential route into further career progression. Hours of workMonday to Friday – 08:00 am to 17:00 pm25 days holiday + Bank holidaysOvertime availableFurther trainingCompany pensionKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 3 or mechanically City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceHard working attitudeGood communication skillsClient FacingIf you are interested please email your CV to Alex Denton of CBW Staffing Solutions....Read more...
Shift Maintenance Engineer – Continental Shift – Commercial Building – Battersea, South West London – up to £41,000 Per annum Are you looking for an entry into maintenance? Are you electrically or mechanically qualified? Are you part qualified and looking for a company to help support the rest of your qualifications? If the answer is yes, then read on.... My client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in Battersea, South West London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the maintenance team on site, He or she will be required to carry out electrical, and mechanical maintenance across a tenant contract, working as part of a three-man shift team. In return, the company offers a competitive salary of up to £41,000, further training and career progression. PackageUp to £41,000 per annumUniform and Tools ProvidedCycle to work scheme22 days holiday Overtime AvailablePensionInternal Progression & DevelopmentPrivate healthcare Hours of workContinental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified or mechanically City & Guilds Level 2Have a hard-working attitudeWillingness to learnMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceGood communication skillsClient FacingIf you are interested please get in contact with Alex Denton of CBW Staffing solutions!....Read more...
Proposals Engineer required to take responsibility for the end to end proposal process including, quotations, bid and tender response.
Key skills
HNC, HND or Degree in Electronic or Electrical Engineering or Process, Mechanical Engineering or equivalent practical experience.
Familiarity with Commercial and Technical review processes ideally in an Oil and Gas technical sales role.
IT skills, Microsoft Office, Word and Excel.
Control systems DCS or SCADA or PLC.
Drawing packages such as AutoCAD and MS Visio.
Customer focus on internal and external customers.
Responsibilities
Preparation of Engineering proposals for products and services.
Interpretation of external technical specifications into a compliant technical proposal.
Price propositions within companies??? strategies on sales and marketing, charge out rates and engineering resources.
Single point of contact for client. ....Read more...
Proposals Engineer required to take responsibility for the end to end proposal process including, quotations, bid and tender response.
Key skills
HNC, HND or Degree in Electronic or Electrical Engineering or Process, Mechanical Engineering or equivalent practical experience.
Familiarity with Commercial and Technical review processes ideally in an Oil and Gas technical sales role.
IT skills, Microsoft Office, Word and Excel.
Control systems DCS or SCADA or PLC.
Drawing packages such as AutoCAD and MS Visio.
Customer focus on internal and external customers.
Responsibilities
Preparation of Engineering proposals for products and services.
Interpretation of external technical specifications into a compliant technical proposal.
Price propositions within companies??? strategies on sales and marketing, charge out rates and engineering resources.
Single point of contact for client. ....Read more...
Product Engineer Electronics Assembly
Location: Fareham
Category: Engineering
Position: Full-time, Non-Managerial
Salary: £45,000 - £55,000
Are you a detail-oriented and proactive Product Engineer with hands-on experience in electronic assembly? Join our dynamic team and help drive manufacturing excellence by bridging customer requirements and production solutions.
What youll do:
- Create, check, and maintain Bills of Materials and detailed manufacturing documents
- Convert customer parts lists and drawings into clear, production-ready formats
- Develop and update Assembly Aids (AAs) and ensure documentation is controlled
- Liaise with Sales, Engineering, Production, Quality, and customers to resolve issues
- Support process improvement, analyse product yields and help find root causes
- Champion configuration control, design changes, and continual improvement
- Provide DFM feedback and assist sales with labour estimates
- Help implement new methods to maximise yield and efficiency
- Support quality activities and participate in audits
- Contribute to a collaborative team and busy manufacturing environment
What were looking for:
- Electronic assembly experience
- Ability to read technical drawings and electronic component specs
- Experience creating documents in Microsoft Word
- Prior experience as Engineer or Technician
- Understanding of MRP software and mechanical assembly
- Knowledge of continuous improvement practices
- Engineering qualification (A-Level, BTEC or higher)
- Trade test may be required to confirm practical skills
Key qualities:
- Excellent communicator with solid interpersonal skills
- Responsive, motivated, and able to work under own initiative
- Calm, collected, and disciplined approach within busy environments
- Strong organisational skills and attention to detail
If you are ready to take a hands-on role supporting electronics manufacturing and drive process improvements, we want to hear from you. Apply now by sending your CV to Max Sinclair max@holtengineering.co.uk and help us meet production and quality objectives!....Read more...
Mechanical Maintenance Engineer - Client Direct - Days - Commercial Office - City of London- £46,200 + BonusExciting opportunity to work In House / Client Direct Company in City of London . My client is looking for a Mechanical Mainteanance Engineer to be based in a critical / commercial building in City of London London. The successful candidates will be mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, he or she will have experience carrying out mechanical, plumbing, HVAC & fabric duties. In return the company are offering a competitive salary of £46,200, further training and career progression.Respond to Service Desk reactive tasks as directed in accordance with SLAsAssist in ensuring plant rooms are tidy and presentable, reporting any issues for rectification.Undertake reactive maintenance, minor works and public health maintenance including blocked toilets.Investigation and rectification of hot & cold air conditioning complaints. This will entail operation of the Building Management System (BMS), plus operation of the Lighting Control System (LCS).Complete water treatment tasks in accordance with L8 utilising the water treatment logbooks as directed by the Responsible Person(s) report any issues without delay. Undertake minor fabric maintenance works covering areas such as painting, furniture moving, etc and ensuring that any materials required to complete tasks are ordered in a timely and appropriate manner.Carry out minor mechanical installations, as and when requested and supervised.Identify, manage and report any risks, accidents or near misses in a timely manner.Work with and escort contractors during maintenance visits, ensuring that working guidelines are always followed and assisting with the quarterly inspection undertaken by the water treatment consultant.To respond quickly and effectively to any building alarms received from the helpdesk or BMS, and to escalate alarms where necessary, recording all reactive tasks in the shift log.Uphold the integrity of the company always and ensure provision of high levels of customer service are provided.Hours of workMonday to Friday08:00 - 17:00Package£46,200 salary + bonus25 days annual leave + bank holidaysEmployer Pension Contribution of 7.5%BUPA Private Medical and Dental – with family upgrade availableEAPHealth Assessments every 2 yearsLife Assurance – 4x times salaryIncome ProtectionCritical Illness InsuranceTravel InsuranceWill WritingAnnual Eyesight tests and flu vaccinationsEnhanced family leave paysponsorship for professional /educational studiesindustry leading training schemeDiscounts and cash backs across retail, travel, entertainment etc.RequirementsMechanically or electrically qualified Level 2 / 3 / HNC / HND18th Edition if electrically qualified You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceExcellent customer skills Highly desirable (Not essential)Any further qualifications (i.e. Electrical or Air Conditioning etc)Experience working in a bank / data centre / commercial OfficeHigh Voltage - Experience / Qualification - Current or expiredPrevious experience a day and night shift pattern If you are interested please get in contact with Fin Havering of CBW Staffing solutions....Read more...
Mechanical Maintenance Engineer - Client Direct - Days - Commercial Office - City of London- £46,200 + BonusExciting opportunity to work In House / Client Direct Company in City of London . My client is looking for a Mechanical Mainteanance Engineer to be based in a critical / commercial building in City of London London. The successful candidates will be mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, he or she will have experience carrying out mechanical, plumbing, HVAC & fabric duties. In return the company are offering a competitive salary of £46,200, further training and career progression.Respond to Service Desk reactive tasks as directed in accordance with SLAsAssist in ensuring plant rooms are tidy and presentable, reporting any issues for rectification.Undertake reactive maintenance, minor works and public health maintenance including blocked toilets.Investigation and rectification of hot & cold air conditioning complaints. This will entail operation of the Building Management System (BMS), plus operation of the Lighting Control System (LCS).Complete water treatment tasks in accordance with L8 utilising the water treatment logbooks as directed by the Responsible Person(s) report any issues without delay. Undertake minor fabric maintenance works covering areas such as painting, furniture moving, etc and ensuring that any materials required to complete tasks are ordered in a timely and appropriate manner.Carry out minor mechanical installations, as and when requested and supervised.Identify, manage and report any risks, accidents or near misses in a timely manner.Work with and escort contractors during maintenance visits, ensuring that working guidelines are always followed and assisting with the quarterly inspection undertaken by the water treatment consultant.To respond quickly and effectively to any building alarms received from the helpdesk or BMS, and to escalate alarms where necessary, recording all reactive tasks in the shift log.Uphold the integrity of the company always and ensure provision of high levels of customer service are provided.Hours of workMonday to Friday08:00 - 17:00Package£46,200 salary + bonus25 days annual leave + bank holidaysEmployer Pension Contribution of 7.5%BUPA Private Medical and Dental – with family upgrade availableEAPHealth Assessments every 2 yearsLife Assurance – 4x times salaryIncome ProtectionCritical Illness InsuranceTravel InsuranceWill WritingAnnual Eyesight tests and flu vaccinationsEnhanced family leave paysponsorship for professional /educational studiesindustry leading training schemeDiscounts and cash backs across retail, travel, entertainment etc.RequirementsMechanically or electrically qualified Level 2 / 3 / HNC / HND18th Edition if electrically qualified You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceExcellent customer skills Highly desirable (Not essential)Any further qualifications (i.e. Electrical or Air Conditioning etc)Experience working in a bank / data centre / commercial OfficeHigh Voltage - Experience / Qualification - Current or expiredPrevious experience a day and night shift pattern If you are interested please get in contact with Charlie Long of CBW Staffing solutions....Read more...
Software Engineer- Korneuburg, Vienna - Austria
(Tech stack: Software Engineer; C#, .NET, SQL, Database Modeling, REST APIs, Git, CI/CD, JavaScript, three.js, WebGL, HTML, CSS; Software Engineer)
Join a global market leader in industrial automation, where your work as a Software Engineer will directly impact engineering and manufacturing operations across Europe, Asia, and the Americas. Based in Korneuburg, near Vienna, you’ll contribute to the evolution of intelligent product configurators used worldwide by leading customers in sectors like automotive and mechanical engineering.
You’ll be part of a cross-functional development team responsible for building and enhancing customer-specific web-based configurator applications, while also supporting the underlying databases and infrastructure. Your work will span the full software development lifecycle—from feasibility analysis and prototyping to implementation, testing, and support—ensuring innovative, stable, and user-friendly solutions for a global audience with the following Tech stack: C#, .NET, SQL, Database Modeling, REST APIs, Git, CI/CD, JavaScript, three.js, WebGL, HTML, CSS.
You’ll thrive in an agile, collaborative environment that values creativity, technical curiosity, and a proactive mindset. Fluency in German and English (B2) is essential for effective communication with international teams and customers.
This is your chance to collaborate with some of the brightest minds in the Automation industry and contribute to Automation engineering.
All Software Engineer positions come with the following benefits:
Shares in the company.
3 hours ‘free time’ each week to investigate new technologies.
An annual training allowance of €4,500.
27 days holiday (excluding Public Holidays) plus your birthday off.
Flexible working hours.
Location: Korneuburg, Vienna, Austria/ Hybrid Working
Salary: €49,000 - €63,000 + Pension + Benefits
To apply for this position please send your CV to Charlie Skipper at Noir.
Applicants must be based in Austria and have the right to work in Austria even though remote working is available.
NOIRAUSTRIAREC
NOIREUROPEREC
NOIREURNET
NC/CS/.NET4963....Read more...
Job Title: Manufacturing Engineer Location: Sunbury-on-Thames, Surrey Salary: Up to £50,000 per annum (negotiable, dependant on experience) Benefits:25 days holiday plus bank holidays6% employer pension contributionPrivate healthcare / medical insuranceLife assurance (4× annual salary)Discounted goods and services schemeCycle-to-work schemeModern working environmentFriendly and supportive team with approachable managementContinued staff development and training opportunitiesOpportunity to lead and support Continuous Improvement initiatives Company Profile This is a global engineering and technology business delivering advanced solutions across aerospace, automotive, rail, oil & gas, and industrial markets. The UK site provides design, manufacturing, and support for electro-mechanical products and systems. With a strong focus on lean practices, sustainability, and innovation, the company provides employees with opportunities to lead improvement projects and contribute to global operations. Job Profile As the successful Manufacturing Engineer, you will work across operations, supply chain, and design engineering to provide technical expertise in supporting both existing and new products. You will play a key role in defining, improving, and maintaining manufacturing processes, implementing lean initiatives, and supporting Continuous Improvement projects across the business. This role requires strong practical engineering experience, problem-solving ability, and a proven track record in lean manufacturing environments. Duties:Collaborate with cell leaders, design engineering, and the lean coordinator to improve process efficiencyCreate and maintain routings in the MRP system and support documentation such as SOPs and visual factory displaysImplement standard work practices and introduce lean manufacturing methods to reduce throughput times, scrap, and reworkSupport layout changes in collaboration with facilities and maintenance teamsAnalyse production data to identify key issues and drive corrective actionsEstablish and monitor product cycle times, working to reduce manufacturing labour content where possibleLead or support improvement and CAPEX projects to enable new process or product introductionsWork with engineering teams on product documentation modifications and managing component obsolescenceProvide day-to-day engineering support for production cells (concessions, FRACAS, change notes, MRB activities)Ensure cost-effective and efficient manufacturing process flows are in place for new product introductionsLead and support process FMEAs, ensuring effective implementation across productionManage new product introductions and support the manufacture of legacy products through the product lifecycleMentor cell leaders and provide guidance on improved assembly and test methods Skills & Attributes:Proven experience in a Manufacturing Engineer or similar role within aerospace, automotive, or related industriesPrevious NPI experience and strong understanding of process documentation (PFMEA, control plans, process maps)Proven record of successfully implementing Lean and standard work in industrial environmentsExperience with problem-solving tools such as 5 Whys, Ishikawa diagrams, and 8DTechnical knowledge of electro-mechanical manufacturing processes ERP/MRP system knowledgeGood IT skills, including Word and Excel at intermediate levelStrong project management ability with experience leading long-term complex projectsExcellent communication and presentation skills with the ability to influence at all levelsSelf-motivated, proactive, and able to manage time effectively under pressureStrong leadership qualities and ability to motivate othersKnowledge of process control techniques such as gauge R&R, DOE, and SPC Education / Certificates:Degree or HNC/HND in Mechanical, Manufacturing, or related Engineering discipline (or equivalent experience) Hours of Work:37.5 hours per weekMonday to Thursday: 07:30 – 16:00 or 08:00 – 16:30Friday: 07:30 – 13:00 or 08:00 – 13:30 Interested? This role offers an excellent opportunity for a proactive Manufacturing Engineer to join a forward-thinking global organisation. You will work across multiple functions to improve processes, lead lean initiatives, and support new product introductions, while developing your skills in a supportive and professional environment. With competitive pay, strong benefits, and opportunities to influence change, this position is ideal for an engineer looking to make a real impact in a dynamic and innovative company.Bolt-On Personnel and our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel.....Read more...
Flexible working hours, company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Senior Design Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables.The successful Senior Design Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Senior Design Engineer will include:
Develop new designs or re-engineer existing designs for new applications using AutoCAD 2D & 3D to an expert level, including Solid Edge.
Create detailed component and assembly drawings
Create and maintain accurate documentation including BOM’s, Proposals, Manuals and Maintenance instructions for designs.
Interpret customer specifications and design standards
Participate in Design/Process Failure Mode and Effect Analysis (DFMEA/PFMEA) activities
Reporting to the Technical Authority, Engineering Resource Manager and Engineering Director
For the Senior Design Engineer role, we are keen to receive CV’s from candidates who possess:
Experience as a Senior Design Engineer or similar within an Engineering environment
Demonstrable understanding of material selection,
Strong understanding of industry standards such as ISO, AGMA, DIN and FKM to name a few.
Bachelors Degree in Mechanical Engineering and or CEng
Experience using SAP MRP
Salary & Benefits:
up to £65,000 depending on experience
Flexible working hours
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Senior Design Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
An exciting opportunity for a Control Systems Engineer to work in an industrial machinery manufacturing company. They are a globally recognised specialist supplier of custom made hydraulic systems. You will be joining the core engineering team, responsible for ensuring that the customer needs are understood and met. This role will work closely with sales to ensure the technical needs are understood and the product capabilities are clearly defined. At systems level managing aspects like system risk, validation and verification circles and compliance to regulatory needs.
Requirements
Experience with dynamics control systems.
Hands on experience in machine hardware and software system engineering.
Experience operating in an engineered to order industry.
A degree in mechanical, electrical or mechatronic engineering.
MATLAB and Simulink.
Knowledge and use C# for testing purposes.
Proficient with Microsoft office.....Read more...
An exciting opportunity for a Control Systems Engineer to work in an industrial machinery manufacturing company. They are a globally recognised specialist supplier of custom made hydraulic systems. You will be joining the core engineering team, responsible for ensuring that the customer needs are understood and met. This role will work closely with sales to ensure the technical needs are understood and the product capabilities are clearly defined. At systems level managing aspects like system risk, validation and verification circles and compliance to regulatory needs.
Requirements
Experience with dynamics control systems.
Hands on experience in machine hardware and software system engineering.
Experience operating in an engineered to order industry.
A degree in mechanical, electrical or mechatronic engineering.
MATLAB and Simulink.
Knowledge and use C# for testing purposes.
Proficient with Microsoft office.....Read more...
DFM Engineer – Design for Manufacturing – Medical Devices - Cambridge
An exciting opportunity awaits you to join a rapidly growing Medical Devices division and contribute to the development of innovative Medical Technologies. We are seeking a Senior or Principal Design Engineer who has previously worked as a hands on engineer, potentially as a Manufacturing Engineer, while working on Design of Manufacturing (DFM) within the Medical Devices, Biotechnology or Sciences industries.
Ideally, you will have a degree in manufacturing, mechanical or process engineering, while having Manufacturing, Design or Process Engineering experience designing in 3D CAD while also having a background in maintaining production machinery.
You will support design teams across multiple functions, with a particular focus on Design for Manufacturing (DFM). The role involves building prototypes and testing new rigs to ensure medical devices function correctly and can be manufactured efficiently. Supply Chain experience would be highly advantageous.
Given the size of the group, we need someone willing to engage in designing, building, and testing systems, as well as maintaining production machinery. As the group expands, this role will evolve, providing excellent opportunities for career advancement.
You will be expected to take leadership of various projects as they arise, whilst also collaborating effectively within teams depends on project requirements.
Due to working alongside other Medical Devices divisions, it is expected that you would have knowledge of ISO 13485, QMS and GMP.
In return, you will receive an excellent starting salary, free lunches, enhanced pension, bonuses, healthcare and other excellent benefits you’d expect with a much larger organisation.
Given the high demand for Medical Devices opportunities, we anticipate significant interest in this role. If you are interested, we recommend submitting your application promptly to avoid missing out.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
• Understanding how to Risk Assess and stay safe at all times
• Assist with ensuring Mechanical, Electrical and Refrigeration checks are carried out and findings recorded accurately
• Learn how to identify all outstanding works and leads, including completion of the relevant paperwork
• Assisting with refrigerant leak checks
• Assisting with methodical fault finding and troubleshooting
• Actual self-completion of maintenance work whilst on site with a qualified Service Engineer Training:
Level 3 Refrigeration Air Conditioning and Heat Pump Engineering Technician Apprenticeship Standard
F-gas 2079 Cat 1 Qualification
Training Outcome:Following successful completion of the apprenticeship, the right candidate may move into any number of roles in the industry, including:
Junior Service Engineer
Service Engineer
Senior Engineer
Supervisor
Service management
Employer Description:We are a team of 12 with a combined experience of over 100 years.
We love the industry and what we do and are passionate in all aspects of Service and Maintenance of air conditioning products.
We are looking for applicants to pass down knowledge and bring into the industry. We always aim to learn from apprentices, we believe everyone has a say.Working Hours :Monday - Friday 8am - 5pm, 1-hour lunch break, OT is available through the week and weekends.
Basic £7.00 Per Hour (£14,560 per annum) additional OT @ x1.5 / x2 Sunday. Door to door pay on topSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative....Read more...
Embedded Software Engineer – Biotech or Medical Devices – Cambridge
An established and growing Biotech and Medical Devices company, based in Cambridge, is currently looking for an Embedded Software Engineer to join them and take responsibility for the continued development of their software on electro-mechanical devices that are used in the biotech and medical devices sectors.
Based in Cambridge, you will be working alongside scientists, engineers, designers, physicists and other medical devices and biotech industry experts in the development this cutting-edge medical device.
Ideally, you will have worked within the Biotech or Medical Devices sectors previously and have knowledge of ISO 13485, IEC 62304 and ISO 14971.
The company has the unique ability to offer an excellent benefits package, pension, medical insurance, life assurance and some other excellent benefits alongside a competitive starting salary.
We are looking for someone to start as soon as possible and interviews will happen quickly, with this in mind, if you are interested in the role, I suggest making an application now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.
....Read more...
Building Services Engineer – FM Service Provider – Uxbridge, North West London - Ongoing tempCBW Staffing Solutions is currently recruiting for an Electrical or Mechanical Maintenance Engineer to join an established building services company based in North West London, London. These roles are situated within a commercial office environment, where you will be responsible for carrying out both planned and reactive maintenance as part of an experienced maintenance team. Vacancy Monday to Friday08:00 - 17:0040 hours per weekOngoing temp£25 per hour Key ResponsibilitiesSmall electrical installations, fault-finding, and lighting maintenanceEmergency lighting testingControl panel maintenanceReplacing ballastsMonitoring the BMS (Building Management System) for heating and cooling systemsGeneral M&E and fabric maintenanceLogbook updates and compliance reportingBasic plumbing tasks (e.g. unblocking toilets)Maintenance of pumps, motors, and other building systemsRequirementsTrade qualifications 18th Edition qualificationAbility to provide copies of relevant trade certificatesProven experience in commercial building maintenanceMulti-skilled with a proactive, hands-on approachStrong communication skills and client-facing experienceTo apply, please send an up-to-date copy of your CV to Tom Gotts at CBW Staffing Solutions for more information.....Read more...