Electronic Design Engineer required to join a PCB product design and development team who work from product brief, use Cadence CAD tools mainly OrCAD and Allegro to design the solution, commissioning prototypes and move to manufacture.
You will have
Electronic degree or other relevant engineering discipline.
Electronic PCB design commercial experience.
Cadence design tool knowledge ideally OrCAD or Allegro.
Electronic and PCB design track record.
Role will be
Analogue and digital electronic design.
PCB layout design for prototyping then to manufacture.
Hardware debugging and fault find.....Read more...
Electronic Design Engineer required to join a PCB product design and development team who work from product brief, use Cadence CAD tools mainly OrCAD and Allegro to design the solution, commissioning prototypes and move to manufacture.
You will have
Electronic degree or other relevant engineering discipline.
Electronic PCB design commercial experience.
Cadence design tool knowledge ideally OrCAD or Allegro.
Electronic and PCB design track record.
Role will be
Analogue and digital electronic design.
PCB layout design for prototyping then to manufacture.
Hardware debugging and fault find.....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
Product Design Mechanical Engineer – Medical Device – Warwick
A growing Medical Devices company, located in Warwick, is currently seeking an experienced Product Design Mechanical Engineer to contribute to the development of various Medical Devices.
As part of a team of engineering experts, including physicists, electronics engineers, scientists, and other specialists in Medical Devices, you will play a pivotal role in working on a range of projects aimed at creating life-saving and life-improving Medical Devices.
We are specifically looking for candidates with experience in Medical Devices, preferably in the areas of product design and product development. However, individuals from the life sciences sector with experience working under strict regulations will also be considered.
The ideal candidate would have a few years of industry experience and might be seeking their second role to advance their career. While a relevant degree in Mechanical Engineering or a related field is preferred, it is not essential if you have substantial experience as a Mechanical Design Engineer in the Medical Devices sector.
In return for your contributions, you will receive a competitive salary, regular salary reviews, bonuses, a pension plan, life assurance, and other outstanding benefits typically associated with larger organizations.
This is a fantastic opportunity to join a growing company that places a strong emphasis on staff development and career advancement. Due to the anticipated high level of interest, we encourage interested candidates to apply promptly to avoid missing out.
For further information, please feel free to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will reach out to you.
Newton Colmore Consulting specializes in recruiting within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Mechanical Design Engineer – Genomics Instrumentation – Cambridge
A growing biotechnology company, based in Cambridge, is currently looking for an experienced Mechanical Design Engineer to support the development of cutting-edge genomics instrumentation.
You will be working within a multidisciplinary team of engineering experts, including physicists, electronics engineers, software developers, and life sciences specialists. You’ll be a key member of the team, contributing to the design and development of innovative devices that enable high-throughput genomic workflows and precision diagnostics.
We’re looking for someone with experience in product design and development, ideally within medical devices, diagnostics, or scientific instrumentation. A background in mechanical engineering is essential, and experience working in regulated environments (ISO 13485, FDA QSR) would be highly beneficial.
The ideal candidate will have a few years of industry experience and be looking to take the next step in their career. You’ll be involved in the full product lifecycle—from concept development and prototyping through to design for manufacture and product launch.
You’ll be rewarded with a competitive salary, regular salary reviews, bonus scheme, pension, life assurance, and other excellent benefits you’d expect from a growing, forward-thinking organisation.
This is a fantastic opportunity to join a company that invests in its people and is making a real impact in the field of genomics. Due to expected interest, I recommend applying now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices and Scientific recruitment at Newton Colmore Consulting, on +44 121 268 2240, or make an application and one of our team will be in touch.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.....Read more...
Are you a Hardware Design Manager based in Leicestershire looking for an exciting new challenge? Are you looking to work for internationally recognised business at the forefront of innovation?
Our client is a global industry leader in the design and manufacture of cutting-edge electronics-based products, designing and producing sophisticated technologies that drive advancement.
A unique opportunity has arisen for a Hardware Design Manager to lead the development, test and delivery of electronic hardware and FPGA firmware for all new and existing products. Driving the company strategy and delivering customer satisfaction, you will have full product ownership and ensure best practice.
Key skills and experience required for Hardware Design Manager, based in Leicestershire, will include:
Significant experience within a management position, running a Hardware engineering team
Sufficient Electronics / Hardware background around power, analogue and digital circuit design
Significant experience of full product development and DFM
Experience within a high speed electronic product environment
Degree qualified in Electronics or a related discipline
This is a great opportunity to join a forward-thinking, highly reputable international company, who can offer the opportunity for career progression and personal development.
To apply for Hardware Design Manager based in Leicestershire, please send your CV and covering letter to rwilcocks@redlinegroup.Com, or for more information contact Ricky Wilcocks on 01582 878810 or 07931788834.....Read more...
An exciting opportunity has arisen for a Lead Product Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Lead Product Engineer role, based in Great Yarmouth, Norfolk, will be to lead microelectronic product portfolios for both New Product Introduction (NPI) and Legacy product lines. They will be working with customers on product requirements, manage change requests and documentation and component obsolescence.
Some of the key experiences and competencies for the Lead Product Engineer, based in Great Yarmouth, Norfolk will be to work to aerospace / defence standards ideally within a microelectronic product line. Packaging experience with customer designs will be beneficial along with an understanding of mechanical CAD design principles.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Lead Product Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1299. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
Senior RFIC Design Engineer
Location: Maldon, Essex
Company:
Join a Maldon based, world-class semiconductor team working on cutting-edge RF and RFIC technologies. This is a great opportunity to contribute to the design and development of integrated RF solutions in a fast-paced, customer-focused engineering environment.
You will play a key role in designing RFIC blocks such as LNAs, mixers, and VCOs operating from MHz up to 6 GHz, contributing to a diverse product portfolio covering both analogue and digital front-end systems in SiGe and CMOS processes.
Key Responsibilities for this Senior RFIC Design Engineer job, based in Maldon:
Support product and technology teams by delivering high-performance RFIC solutions.
Design and simulate key RFIC building blocks including amplifiers, mixers, and oscillators.
Carry out schematic capture, layout supervision, and verification using Cadence or Synopsys tools.
Perform EM simulation and optimisation using tools such as ADS or Momentum.
Work with cross-functional teams on block and system-level integration to ensure robust performance.
Contribute to design reviews, support silicon debug, and help drive product success from concept to tape-out.
Qualifications and Skills required for this Senior RFIC Design Engineer job, based in Maldon:
Degree in Electronics, RFIC Design, or a related field, with extensive experience in RFIC development.
Proficiency in Cadence or Synopsys design environments, including schematic, layout, and verification workflows.
Experience with EM simulation tools (e.G., ADS, Momentum) and understanding of RF metrics like gain, NF, linearity, and phase noise.
Familiarity with SiGe and CMOS technologies and a strong grasp of RF design principles across MHz to GHz.
Excellent communication and collaboration skills, with the ability to solve technical challenges across teams.
How to Apply:
If you're ready to shape the future of integrated wireless solutions and contribute to advanced RFIC designs, please submit your CV and cover letter to ndrain@redlinegroup.Com or call Nick on 01582 878828 / 07487 756328!....Read more...
Product Developer Engineer Barcelona - 3/4 days a week Role Overview Design, develop, and implement RFID hardware and software products across multiple sectors including retail, healthcare, and industrial applications. Work collaboratively across interdisciplinary teams to integrate hardware, software, mechanical, and control systems into innovative product solutions. Key ResponsibilitiesDesign and develop new RFID hardware and software productsCollaborate with cross-functional teams (RF engineers, software developers, mechanical engineers)Integrate hardware, software, mechanical and control systems into cohesive solutionsSupport certification processes and regulatory complianceConduct testing and validation of prototypes and production unitsCreate technical documentation and product specificationsPartner with manufacturing teams for smooth production transitionsTranslate market requirements into technical specificationsRequired QualificationsBachelor's or Master's degree in Engineering, Electronics, Computer Science, or related field4+ years of experience in product development, preferably in electronics or RFID technologyStrong understanding of hardware-software integration principlesExcellent problem-solving skills and attention to detailStrong communication and teamwork abilitiesFluent in EnglishEU residency or EU work permitPreferred SkillsExperience with embedded systems developmentKnowledge of RF technology and antenna designFamiliarity with regulatory certification processes (FCC, CE, etc.)....Read more...
Our client is looking for Electronic Engineer to work in a wide ranging projects involving hardware, firmware and desktop software development. The role involves both new product related research and prototyping and assisting the engineering and customer support teams as required.
Key responsibilities
Interfacing PC based driving simulators to company hardware and software for both demonstrations and simplifying testing.
Automated test systems for product validation and calibration.
Tracking project progress through the new product life cycle and assisting the design team where required.
Key skills
Educated to at least degree standard in electronics related discipline, electronics, mechatronics.
Competent in the use of an oscilloscope and other test apparatus.
An interest in the aviation, automotive or space industries would be an advantage.
An understanding of RF signals
Experience in PCB design, Digital Electronics, Embedded Systems, Debugging, Matlab, Sensors....Read more...
Our client is looking for Electronic Engineer to work in a wide ranging projects involving hardware, firmware and desktop software development. The role involves both new product related research and prototyping and assisting the engineering and customer support teams as required.
Key responsibilities
Interfacing PC based driving simulators to company hardware and software for both demonstrations and simplifying testing.
Automated test systems for product validation and calibration.
Tracking project progress through the new product life cycle and assisting the design team where required.
Key skills
Educated to at least degree standard in electronics related discipline, electronics, mechatronics.
Competent in the use of an oscilloscope and other test apparatus.
An interest in the aviation, automotive or space industries would be an advantage.
An understanding of RF signals
Experience in PCB design, Digital Electronics, Embedded Systems, Debugging, Matlab, Sensors....Read more...
Human Factors Design Engineer – Medical Devices – Oxford
A Medical Devices company, based in Oxford, is currently looking for a Human Factors Design Engineer to assist with the ongoing development of new Medical Devices.
Working alongside an established R&D team, your role will be of paramount importance in ensuring that product design adheres to Medical Devices standards, taking into account Product Development, Industrial Development, and Human Factors Development factors, specifically ISO 13485, ISO 14971, and IEC 62366 standards.
You will need to have prior experience in the Medical Devices sector, which could have been gained in industry or through PhD/Post Doc roles. We are open to candidates with varying levels of experience, and the salary range will be determined based on your experience.
Due to the nature of this company's work, you will be at the forefront of the medical devices sector, constantly learning new concepts and generating innovative ideas on a daily basis.
It is expected that you hold a degree in Human Factors, Industrial Design, Product Design, or another related subject that has led you to specialize in the Human Factors role, particularly in the Medical Devices sector.
You will be rewarded with an excellent starting salary, a bonus, career development opportunities, ongoing skills enhancement, and a wide range of benefits.
I anticipate a high level of interest in this role, so if you are interested, I recommend submitting your application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Human Factors Design Engineer – Medical Devices – Cambridge
A Medical Devices company, based in Cambridgeshire, is currently looking for a Human Factors Design Engineer to assist with the ongoing development of new Medical Devices.
Working alongside an established R&D team, your role will be of paramount importance in ensuring that product design adheres to Medical Devices standards, taking into account Product Development, Industrial Development, and Human Factors Development factors, specifically ISO 13485, ISO 14971, and IEC 62366 standards.
You will need to have prior experience in the Medical Devices sector, which could have been gained in industry or through PhD/Post Doc roles. We are open to candidates with varying levels of experience, and the salary range will be determined based on your experience.
Due to the nature of this company's work, you will be at the forefront of the medical devices sector, constantly learning new concepts and generating innovative ideas on a daily basis.
It is expected that you hold a degree in Human Factors, Industrial Design, Product Design, or another related subject that has led you to specialize in the Human Factors role, particularly in the Medical Devices sector.
You will be rewarded with an excellent starting salary, a bonus, career development opportunities, ongoing skills enhancement, and a wide range of benefits.
I anticipate a high level of interest in this role, so if you are interested, I recommend submitting your application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Role Purpose An exciting opportunity for a creative designer to join an established children's consumer goods brand, focusing on new product development and rebranding initiatives. Design ResponsibilitiesCreate engaging design assets using Adobe Creative SuiteSupport packaging artwork developmentParticipate in creative brainstorming sessionsExecute technical retouching and visualisationPrepare print-ready artworkMaintain brand consistency across projectsProject ManagementHandle multiple concurrent design projectsMeet production deadlines consistentlyCollaborate with senior design teamSupport workflow organisationFollow detailed design briefsContribute to team communicationsTechnical Skills RequiredExpert in Adobe Photoshop and IllustratorUnderstanding of print production processesKnowledge of technical specificationsStrong artwork preparation abilitiesAttention to layout and typographyDigital asset management expertiseThe Ideal Candidate You'll have a genuine passion for children's products and toys, combined with a keen eye for detail and the ability to translate imaginative concepts into production-ready designs. Essential ExperienceProven design portfolioCommercial artwork creationPrint production knowledgeBrand guidelines implementationCreative problem-solving abilitiesDesirable QualitiesChildren's product design experienceUnderstanding of sustainable packagingKnowledge of toy industry trendsCreative arts backgroundPortfolio demonstrating playful design workHow to Apply Please submit your CV and portfolio. A cover letter is welcomed to demonstrate your enthusiasm for children's design and the toy industry.....Read more...
Specifically for this role (backed up by the other Product Development Assistant:
Input DD packaging selections for B2C and Mail Order into the system at the point of photography completion of an item & maintain the organisation of the DD packaging library § Develop & maintain effective relationships with Licensor partners to ensure all information communicated is done so in a clear, concise & polite manner internally and externally.
Input and validate physical product specifications on every product before it is passed to the VM team to prepare for sale, including dimensions, weight, packaging info, raw materials and others as needed.
Working with all the licenced product designers to input and administer approval of all licenced samples for Disney and Warner Brothers initially (others later), feeding back changes to the design team and ensuring that the product is not released when not correct and that images and details are updated with approval information.
Positive & proactive engagement with the whole product development & design team to create & sustain a positive & collaborative working environment e.g. Design Meetings. Update the team on important findings to share product development & design knowledge.
Communicate & update photography, VM & marketing teams when necessary to ensure the correct product is on display in the showroom or on the website, particularly for licenced products.
Liaise with the VM team once product enrichment has been completed and checked to brief our showroom style guides, ensuring the vision & initial concept is carried through into commercial display of the product.
Attend UK tradeshows, assisting with set up/break down & display as needed.
Maintain the organisation of the labelling & photography area. Ensure they are clean, tidy & organised well & all rubbish cleared & sent down to the DC.
Assist with packing & unpacking in the showroom during busy periods. In supporting the other Product Development Assistant, this role will include: § Morning check of all supplier communication and liaising with them promptly to arrange the on-time shipment of all samples.
Morning check of all logistics/ freight company communication to ensure the on-time shipment, delivery, clearance and arrival of samples and progression through unpacking, requesting support where possible to ensure all unpacked within 2 days of arrival.
Review and report on all products loaded but not ordered for upcoming seasons and validate their status with BDMs each week.
Supporting the PD team with the administration of range plans and product information ahead of all sign-offs.
Supporting BDMs in managing and preparing the sign-off suite for all sign-off activity, moving, managing and preparing samples.
Unpack the weekly console within 2 days § Unpack Express parcels on the same day as received in order to process them/pass on quickly.
Process all samples throughout the business, ensuring they are booked into the system, labelled, weighed & measured in line with the critical path.
Pass samples received onto the relevant people/teams such as the NAMS & Designers, as quickly as possible, to ensure timely approvals can be made with factories, customers & licences.
Pass Shipment samples over to the correct team member as soon as they arrive & store any spares in the designated area in the PD & D room.
Make sure all samples are tidied away into their correct designated areas ready for selections or sample processing.
Ensure all product holding areas ready for selections are labelled with the most up-to-date signage for the season ahead.
Training:Attend Oldham College one day per week.Training Outcome:To secure employment within the company.Employer Description:We are one of the leading wholesale suppliers of giftware in the UK. We pride ourselves on providing unparalleled levels of customer service and aim to get your goods onto your shop floor as quickly and efficiently as possible from the moment you place an order. We have 12 regional representatives operating across the UK and Ireland and export worldwide to over 75 countries. We also have a dedicated sales team to provide you with any assistance you need by phone. With an in-house design team designing exclusive gifts, as well the procurement of the very best licences, we have a wide range of over 7000 products across more than 30 brands for you to select from.Working Hours :Monday - Friday, 8.00am - 4.30pm or 8.30am - 5.00pm, 30 minutes for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Solidworks Enclosure Design Engineer required to join a team focusing on the design of automotive enclosures and and mechanical components for new products from prototype to production.
You will have
Engineering based degree ideally in Mechanical Design.
SolidWorks or similar CAD tools commercial experience.
Automotive or motorsport knowledge.
Appreciation of the design constraints of machined, extruded or injection moulded components.
The successful applicant will work with product managers, the production team and other stakeholders creating novel designs suitable for volume manufacture.....Read more...
In this varied role, you’ll join one of our engineering teams working across either our Civil Decommissioning or Defence business streams. From designing control systems to developing Computer Aided Design (CAD) models and performing electrical load calculations, every task helps ensure the safety and sustainability of nuclear infrastructure.
You’ll support the full design lifecycle: from initial concept through to detailed design and design for manufacture. Typical tasks may include producing technical documentation, assessing designs for risk and safety, and learning to work with standards and regulations that apply across the industry.
As part of your development, you’ll take part in internal training that broadens your knowledge beyond your core role. This includes radiological shielding, risk assessment and nuclear appreciation modules – all designed to give you a well-rounded understanding of how we create a safe and secure world.
Training:
You will study towards the Product Design and Development Engineer (Degree) Apprenticeship standard through the University of Lancashire.
Your training will be delivered through a blended learning model that combines in-person and online teaching. Each semester begins with a three-day block of face-to-face delivery, followed by weekly online sessions throughout the term. This structure is designed to support both academic learning and practical application.
The programme is tailored for engineers involved in product development and integrates key disciplines such as materials science, Computer Aided Design (CAD), systems integration, and prototyping. It focuses on equipping learners to create fit-for-purpose solutions in regulated environments.
Upon successful completion, you will be awarded a BEng (Hons) in Professional Engineering (Product Design) and a Level 6 Degree Apprenticeship qualification.
Training Outcome:
By the end of your apprenticeship, you’ll be ready to take on the role of Electrical, Control and Instrumentation Engineer at Cavendish Nuclear, with a competitive salary exceeding £43,000.
You’ll also have the opportunity to build on your progress toward professional registration as an Incorporated or Chartered Engineer, a recognised benchmark of engineering competence, which can support your journey into more advanced roles, such as Senior Engineer.
As a global organisation, Babcock provides countless opportunities to enhance your skills and advance your career. To support your growth, we’ve introduced the Babcock Role Framework, which outlines roles, career pathways, and development opportunities. With every job mapped to these frameworks, you’ll have a transparent view of the steps needed to reach Senior Engineer and beyond.
Employer Description:Babcock is an international defence company providing support and product solutions to enhance our customers’ defence capabilities and critical assets.
We provide through-life technical and engineering support for our customers’ assets, delivering improvements in performance, availability and programme cost. Our c27,700 employees deliver these critical services to defence and civil customers, including engineering support to naval, land, air and nuclear operations, frontline support, specialist training and asset management.
We also design and manufacture a range of defence and civil specialist equipment, from naval ship and weapons handling systems to liquid gas handling systems. We also provide integrated, technology-enabled solutions to our defence customers in areas such as secure communications, electronic warfare and air defence.Working Hours :Monday to Friday 9am to 5pm.Skills: IT skills....Read more...
Mechanical Design Engineer required for an innovative Engineering company supplying Educational markets with unique products.This company invest significantly in research and development of their products, ensuring they remain the supplier of choice for prestigious academic institutions.The successful Mechanical Design Engineer will be easily able to commute to HALIFAX from surrounding towns & cities, including Brighouse, Huddersfield, Wakefield, Bradford and more.Key Responsibilities of the Mechanical Design Engineer will include:
Design complex products based on customer specifications and requirements, offering detailed solutions
Produce and maintain Bill of Materials for individual products
Generate costing estimates by sourcing new components both existing and bespoke
Write technical documentation including user manuals and product specifications
Perform product demonstrations both internally and externally to customers and end users
For the Mechanical Design Engineer, we are keen to receive CV’s from candidates who possess:
Knowledge of basic machining, sheet metal, and bending processes
Knowledge of material selection for appropriate applications
Experience as a Mechanical Design Engineer 2+ years
Experience using Solidworks PDM
BEng Degree in Mechanical Engineering
Salary & Benefits:
Up to £46,000 (depending on experience)
24 Days Annual Leave + Bank Holidays + Birthdays
Annual company profit share
Life insurance cover
8% Combined Pension
37.5 Hours Weekly
To apply for the Mechanical Design Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Lewis Lynch at E3 Recruitment for more information.....Read more...
An exciting opportunity has arisen for a System Engineer to join a cutting-edge team developing advanced Cyber and Information Assurance (IA) products. This role offers the chance to work across multiple development projects, applying innovative engineering solutions to complex, real-world problems.
What Youll Do
- Take technical ownership of system engineering activities across one or more IA product developments.
- Collaborate closely with hardware, software, FPGA and mechanical teams to define and deliver coherent technical solutions.
- Engage in requirements engineering, capturing, analysing and refining requirements across all design disciplines.
- Contribute throughout the full product lifecycle, from initial concept and architecture through to development, verification, and customer delivery.
- Support bid proposals and provide technical input to customer discussions to ensure solutions meet end-user needs.
What Were Looking For
- Degree in a relevant engineering discipline and 5+ years industry experience in systems engineering or a related field.
- Strong understanding of the systems engineering lifecycle, including requirements management, architecture, and product validation/verification.
- Broad technical awareness across multiple engineering disciplines, with expertise in at least one area.
- Ability to produce clear, concise technical documentation and communicate effectively with cross-functional teams.
- Experience using DOORS or similar tools for requirements management is an advantage.
- Must hold sole British nationality and be eligible for UK Security Clearance (SC).
Desirable Skills
- Knowledge of system design languages (UML, SysML) and techniques such as use-case analysis or trade studies.
- Experience preparing technical estimates for bids.
- Familiarity with mechanical and environmental qualification processes.
This is a fantastic opportunity for an experienced System Engineer, or an electronics/software engineer looking to broaden their scope, to play a key role in the design of unique, high-assurance products used in critical national security applications. Youll work with an innovative team tackling challenging technical problems and shaping solutions from concept to delivery.
RW....Read more...
Join a leading multinational electronics manufacturing company as an Electronics Design Engineer. Utilize your expertise in analog, op-amp, and power amplifier design to develop cutting-edge products. Take ownership of product requirements, perform hardware design, and create essential engineering documents. Put your skills to the test by conducting tests on existing and new designs.
Candidate Profile
Bachelors or Masters degree in electronics engineering or related subjects.
Strong experience in amplifier design and analog design.
Proficiency in producing schematics and conducting analog simulations.
Minimum of 3 years of experience in similar roles.
Knowledge and working experience with Electronic Simulation Software such as SPICE, Schematic capture etc.
If you are passionate about pushing the boundaries of electronics design and seeking a challenging opportunity, apply now to be part of dynamic team.
....Read more...
Join a leading multinational electronics manufacturing company as an Electronics Design Engineer. Utilize your expertise in analog, op-amp, and power amplifier design to develop cutting-edge products. Take ownership of product requirements, perform hardware design, and create essential engineering documents. Put your skills to the test by conducting tests on existing and new designs.
Candidate Profile
Bachelors or Masters degree in electronics engineering or related subjects.
Strong experience in amplifier design and analog design.
Proficiency in producing schematics and conducting analog simulations.
Minimum of 3 years of experience in similar roles.
Knowledge and working experience with Electronic Simulation Software such as SPICE, Schematic capture etc.
If you are passionate about pushing the boundaries of electronics design and seeking a challenging opportunity, apply now to be part of dynamic team.
....Read more...
Electronics Engineer – Piezoelectronics – New Product Development – Cambridge
A growing Scientific Engineering organisation is currently seeking an Electronics Engineer to assist in the product development of new piezoelectronics technologies.
You will collaborate with a team of mechanical design engineers, software engineers, and scientists, making teamwork crucial. In this role, you will be the sole electronics specialist, so confidence in your abilities is essential.
Your responsibilities will include electronics design and PCB layout for the new piezoelectronics devices, as well as writing Embedded C software and using other software languages.
While having experience in piezoelectronics would be ideal, it is not a strict requirement. However, we do prefer candidates with experience in highly regulated fields such as Medical Devices, Biotechnology, Scientific Engineering, Pharmatech, or other scientific domains.
While working on cutting-edge technologies, you will also enjoy an excellent starting salary, a generous pension, annual bonuses, private medical cover, life assurance, and other benefits typically associated with larger organisations.
Given the expected high level of interest in this role, we recommend submitting your application promptly if you are interested. We are looking for someone to start relatively soon, though we understand that you may have a notice period.
The interview process will be swift, commencing with a video interview and progressing to an in-person interview. Part of the interview may involve a tour of their state-of-the-art facilities, which are currently being expanded to stay at the forefront of technological advances.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will get in touch with you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
