Mechanical Lead Engineer – FM Service Provider - London – Bank (Commercial Building) - £46,000 per annumAre you a Lead Engineer looking for a new challenge?If yes, then this opportunity could be perfect for you.An exciting chance to join one of the UK’s leading FM service providers. CBW is currently recruiting for a Mechanical Lead Engineer to be based at a commercial office building in London (Bank).Key Duties & ResponsibilitiesReport directly to the Account Manager.Assist the Contract Manager with the day-to-day running of the contract across London and national sites.Act as a working supervisor:50% hands-on mechanical building maintenance.50% supervisory / coordination duties.Ensure all activities are delivered to the highest professional standards with strong attention to quality, compliance, and Health & Safety.Provide a rapid response to plant failures and ensure abnormal conditions or housekeeping issues are dealt with effectively.Act as the key coordination point for site activities, specialist service partners, and client/tenant relationships.Supervise and support all maintenance staff on the contract.Arrange and manage specialist sub-contractors.Maintain and update all reports, site logbooks, and paperwork in readiness for audits.Attend client meetings when required.Ensure tasks are issued and completed across satellite sites.Provide technical support to the Contract Manager, client, and on-site maintenance team.Hours of WorkMonday to Friday, 07:00 – 16:00 or 09:00am - 16:00pm (40 hours per week) Package: £46,000 per annum Free lunches Bonus each year depending on performance RequirementsNVQ Level 2 & 3 Mechanical (essential)Proven track record in mechanical commercial building maintenance (HVAC, pumps, valves, AHUs, FCUs, etc.)Strong communication skills (verbal and written) with staff and clientsAbility to manage and prioritise a busy and varied workloadIT literate, with the ability to use and navigate a CAFM system (training provided)Supervisory or team-lead experience is desirablePlease send your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Multiskilled Maintenance Engineer Location: Essex Shifts: Monday – Friday, rotating shifts (Days, Afternoons & Nights)
We’re recruiting for a Multiskilled Maintenance Engineer to join a leading food manufacturing site in Essex. You’ll play a key role in keeping production running smoothly by carrying out planned, predictive, and reactive maintenance, while supporting ongoing improvements across the site. Key Responsibilities:
Deliver PPM and reactive maintenance across production equipment and site services
Diagnose and repair faults on mechanical, electrical, pneumatic and PLC-controlled systems
Respond quickly to breakdowns, applying root cause analysis to prevent reoccurrence
Keep accurate maintenance records using CMMS systems
Support site safety, quality and continuous improvement initiatives
What We’re Looking For:
Recognised engineering apprenticeship / NVQ / HNC (or equivalent)
Maintenance experience within FMCG, food, drink, or manufacturing
Strong skills with motors, bearings, pneumatics, conveyors and PLC-driven equipment
Safety-first approach, with the ability to work independently and as part of a team
What’s On Offer:
Competitive salary & overtime opportunities
Pension scheme & life assurance
25 days holiday + bank holidays
Training and career development
Please apply below if you're interested....Read more...
Redline Group are working with an international manufacturing organisation, renowned for its commitment to high-technology products & sustainable operations. They are seeking a Senior Process Engineer to support continued investment and growth at its Dutch manufacturing site.
Working closely with stakeholders at all levels across the site, this Dutch based role has a strong focus on driving improvements in lean manufacturing processes and product sustainability with the objective of reducing waste through advanced operational and engineering solutions.
Key Responsibilities:
Drive process improvements across manufacturing lines, identifying inefficiencies and implementing robust solutions.
Lead root cause analysis of process issues and introduce preventative measures.
Design, document, and optimise processes for new services and products.
Collaborate closely with engineering, quality, and production teams to enhance operational output.
Deliver measurable improvements using lean and Six Sigma methodologies.
Maintain and develop standard operating procedures and work instructions.
Key experience required:
Hands-on experience in a manufacturing or process engineering role.
Lean/Six Sigma understanding, certification would be highly desirable.
Good English communication skills.
Proactive, hands-on approach with a focus on continuous improvement.
Ability to work effectively across cross-functional and multicultural teams.
This is an excellent opportunity for a Dutch based Process or Manufacturing Engineer looking to join a high-tech, sustainability-focused manufacturing environment, with the scope to drive real change across operations.....Read more...
Fitter Morley | Circa £15 an hr + Overtime (OTE up to you!) Days: Monday – Friday 40hrsThe Company This market-leading automotive engineering company that has experienced rapid growth and continues to secure long-term projects, with a full order book. Significant investment has been made into the modern manufacturing facility, creating excellent working conditions with high-quality equipment. Due to ongoing success, they are now looking to add an experienced Fitter to their growing team.
The Role – Fitter As a Fitter, you’ll be responsible for:
Installing systems such as hydraulics, compressors, mechanical systems and pneumatics.
Completing a variety of fitting tasks on specialist commercial and transport-related vehicles
We’d love to hear from you if you have experience as a:
Plant Fitter
Hydraulic or Compressor Engineer
Mechanical / Forklift Truck Engineer
Light Vehicle Technician
Or similar vehicle/mechanical fitting background
What’s on Offer:
Salary: £15 an hr DOE
Overtime available at x1.5 – OTE completely in your control
Standard Days: Monday – Friday
Modern workshop with first-class facilities
Free onsite parking
Permanent position with a secure and growing employer
If you are interested in this Fitter role, please apply now or contact Grace at E3 Recruitment....Read more...
As an Apprentice Plumber, you will:
Work alongside our experienced engineers, assisting with a wide range of plumbing and heating tasks
Gain hands-on experience in domestic installations, repairs, servicing and maintenance
Learn how to use tools, equipment and materials correctly and safely
Attend college training (where applicable) to complete your plumbing qualifications
Be part of a supportive team committed to your development and progression
Training:Plumbing and domestic heating technician Level 3 Apprenticeship Standard:
On site experience with our friendly and supportive team
Attend training at Southwest Construction Academy in Bristol (usually one day a week here)
Training Outcome:
Career in Plumbing & Heating with the possibilty of becoming a Gas Safe Registered Engineer
Employer Description:XL Plumbing & Heating Solutions Ltd is a well-established, growing business providing high-quality plumbing and heating services across South Gloucestershire/North Bristol. We’re looking to invest in the next generation of professional engineers by offering an apprenticeship opportunity for someone motivated, reliable and eager to learn.Working Hours :Monday - Friday, 8.45am - 4.45pm.
Meet at the office in Almondsbury BS32 and travel with an engineer in a company van.
At the end of the day you'll return to the office (you can park you car here)Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative,Patience,Physical fitness,Punctual,Honest....Read more...
Manufacturing Process Engineer (NPI Projects)
London (Greenwich) | Up to circa £45.00 per hour (Umbrella) | Long-Term Contract
About the Role
We’re looking for a Manufacturing Process Engineer to help shape the future of assembly processes. In this role, you’ll design and implement lean improvements that make production safer, more efficient, and more sustainable. You’ll work closely with R&D, support projects from concept through to delivery, and ensure processes meet the highest standards of quality and compliance.
What’s in it for you?
Competitive pay and a secure long-term contract
A collaborative and supportive team culture
The chance to make a real impact on products that support critical global infrastructure
Work with cutting-edge technologies that are making a difference worldwide
What you’ll be doing
Design & Improve: Create lean process improvements for tools, equipment, and assembly methods
Deliver Change: Manage projects from concept to handover, keeping efficiency and timelines on track
Validate & Test: Ensure new tooling and processes are reliable and compliant before production
Keep it Safe: Lead PUWER assessments, risk analysis, and safety compliance
Collaborate: Partner with R&D, training schools, and wider teams to support innovation and development
Measure & Monitor: Define KPIs, track progress, and ensure budgets and quality targets are met
What we’re looking for
A degree in Mechanical, Industrial, Production, or related Engineering field
Hands-on experience in manufacturing or technical environments
Knowledge of ISO9001/TL9000, Lean, Six Sigma, and regulated industries
A methodical problem-solver with excellent organisational skills
Willingness to learn systems such as SAP and sDMS
How to apply
If this sounds like the right role for you, we’d love to hear from you. Please apply and submit your CV for review. ....Read more...
As a Maintenance Engineer Apprentice, you’ll be trained to support the installation, repair, and servicing of fire sprinkler systems and related equipment. Working alongside experienced engineers, your responsibilities will include:
Understanding and working in line with our Vision, Values, and Strategy
Following the company Quality Management System at all times
Supporting cross-functional activities within the team
Working to instructions provided by the Site Foreman or Team Leader
Actively seeking knowledge while on site through listening and asking questions
Learning all aspects of installation, service, and maintenance of sprinkler controls and ancillary equipment
Learning how to install, repair, and modify sprinkler systems
Building positive working relationships with staff, clients, and team members
Adhering to Health and Safety requirements at all times
Taking responsibility for your own Personal Protective Equipment (PPE)
Being proactive in personal development, completing achievement records, and demonstrating continual improvement
Attending college (if applicable) and completing all modules on time and to a high standard
This is an excellent opportunity to gain advanced skills in maintenance engineering with strong future prospects.Training:
Maintenance Operations Engineering Technician (MOET) Level 3 Apprenticeship Standard
Training provided by Rochdale Training via workplace visits and off-the-job learning
Ongoing mentoring from experienced engineers
Training Outcome:
Opportunity to progress further within FVS as a qualified Maintenance Engineer
Potential to move into supervisory or specialist roles within engineering and fire protection
Long-term employment with career development opportunities
Employer Description:FVS Ltd is a specialist provider of fire protection and sprinkler systems, delivering installation, servicing, and maintenance across the UK. Based in Newhey, Rochdale, we pride ourselves on quality, safety, and teamwork. We are committed to training and developing apprentices, giving them the skills and qualifications needed for a long-term career in engineering and fire safety.Working Hours :· Monday to Friday
· 7:30 AM - 4:30 PM (with 30-minutes lunch)Skills: Communication skills,Problem solving skills,Team working,Ability to follow instructions,Reliable and hardworking,Eager to learn,Professional attitude....Read more...
Fire Safety Engineer Location: LondonSalary: £40,000 - £55,000 per annum + BenefitsHours: 37.5 per week (09:00 – 17:30, Monday to Friday)Hybrid Working: 3 days office / 2 days home Company Overview CBW are working with a leading consultancy that is seeking a Fire Safety Engineer to join its expanding Fire Engineering division. This is an excellent opportunity for an ambitious engineer with a few years’ experience to develop their career, working on a diverse range of projects with structured mentoring and support from Senior Engineers. Role PurposeDeliver high-quality fire engineering services across multiple sectors.Support project delivery from early design stages through to completion.Gain experience in a client-facing role while developing technical and project management skills.Key ResponsibilitiesAssist with the development of fire safety strategies and associated mark-ups for buildings and infrastructure projects.Carry out site visits during construction phases, providing advisory support.Prepare reports, including external wall system assessments.Undertake technical analysis such as CFD and evacuation modelling using software (e.g. FDS/PyroSim, Pathfinder).Contribute to third-party reviews and design verification.Apply knowledge of legislation and guidance including ADB, BS 9999, BS 9991, BS 7974.Support senior staff in preparing fee proposals and maintaining client relationships.Work collaboratively within the fire engineering team and contribute to continuous improvement.Accurately record project time and assist with invoicing processes.Take part in CPD activities to develop technical knowledge and industry awareness.RequirementsBachelor’s Degree in Engineering (Mechanical, Structural, Civil, or related discipline).Postgraduate fire engineering qualification (Certificate, Diploma or Master’s).Working towards full membership of the IFE (Institution of Fire Engineers).2+ years’ experience in fire safety engineering (desirable).Strong communication and teamwork skills.Self-motivated, organised and detail-focused.Flexible and adaptable to meet changing client needs.Desirable:Experience using FDS/PyroSim, Pathfinder, or other modelling tools.Strong IT skills, including Microsoft Word, Outlook, and Bluebeam.Package£40,000 - £55,000 per annum (subject to experience & qualifications)Hybrid working (3 office / 2 home)37.5 hours per week (no weekends, no on-call)Additional company benefits👉 Apply now to join a forward-thinking fire engineering consultancy, where you’ll work on exciting projects while receiving structured support to progress towards Senior Engineer level.....Read more...
Production Engineer
Location: Andover
Salary: £36,000 per annum
Hours: MonThurs 08:0016:45, Fri 08:0015:30 (Permanent, Full-Time)
Overview
An established precision engineering manufacturer is seeking a detail-oriented and technically skilled Production Engineer to join their team. This is an excellent opportunity for someone with an engineering background or experience in precision machining to play a key role in supporting and improving production processes.
Key Responsibilities:
- Check and author work instructions against customer requirements, quotes, and technical drawings
- Ensure job paperwork is clear, accurate, and consistent across operations before issuing to the shop floor
- Acknowledge and review customer Purchase Orders, ensuring alignment with quotes and specifications
- Coordinate tooling availability and purchase new tooling as needed to maintain stock levels
- Produce and maintain tracking sheets, drill sheets, FAIR sheets, and electronic job planning tools
- Raise and verify work instructions for subcontract operations, ensuring supplier agreements on pricing and lead times
- Liaise with material suppliers to obtain quotes and verify material certificates for compliance
- Adhere to Quality Management Systems (AS9100 Rev D & ISO 9001:2015) and approve suppliers before processing Purchase Orders
- Communicate professionally and proactively with customers, confirming verbal agreements in writing
- Assist in recording and reporting non-conforming products and support corrective actions
- Provide technical administrative and engineering support to increase production efficiency
Essential Skills & Experience:
- Engineering background or strong knowledge of precision machining
- Logical, systematic approach with high attention to detail
- Strong problem-solving and analytical skills
- Excellent time management; able to work independently and as part of a team
- Effective communication and interpersonal skills
- Competent in Microsoft Office and ERP systems
- Right to work in the UK
How to Apply:
To apply, please send your CV to Max Sinclair max@holtengineering.co.uk or apply directly....Read more...
Multi-Skilled Maintenance Engineer (Nights)
Location: Northampton, Northamptonshire Salary: £50,000 Shift: Sunday – Thursday, 18:00 – 03:00 (Nights) Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets. We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary £50,000
Fixed Sunday – Thursday night shift
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543 01923 227 543 . Alternatively, you can send your CV to .....Read more...
Training under a team of experienced engineers to gain knowledge of the engineering standards and techniques needed in the industry
Construction of water wash equipment
Assembly of parts to construct equipment
Reading and understanding drawings to assemble equipment
Use of measuring equipment for inspection /quality department
Use of machine tools to make or to modify parts
Use of hand tools in the construction of the equipment
Working with Computers to find information
Working on CAD system
Working in all departments of the business to gain a rounded understanding every type of roll in the company
Cleaning of the workshop
Training:
4 days a week at Dantex Graphics
1 day a week at Bradford College
Training Outcome:
Production Engineer
Research and development engineer
Supervisor/manager
Head of department
Employer Description:Dantex is a manufacturer and supplier of water wash plate materials, equipment and sundries to the packaging industry. We are the largest photopolymer plate material distributor and manufacturer in Europe and have been serving the packaging industry for over 50 years. Dantex is a specialist in the Label & Tag market, but we are also active in the Dry Offset, Envelope, Tissue, Sack & Bag, Flexible Packaging and Luxury Carton sectorsWorking Hours :Monday - Friday, shifts to be confirmed.Skills: Communication skills,Attention to detail,Problem solving skills,Team working,Initiative,Punctual,Strong Work Ethic....Read more...
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
An opportunity has arisen for a qualified Electrician to join a well-regarded provider of sustainable heating solutions specialising in delivering innovative low-carbon systems to domestic properties, supporting the transition to greener energy.
As an Electrician, you will be working on domestic electrical systems, supporting the installation of renewable technologies such as air source heat pumps and solar systems.
This full-time permanent role offers a salary up to £45,000 and benefits.
You will be responsible for:* Installing and integrating electrical systems for technologies such as solar PV, battery storage, EV charging and air source heat pumps
* Carrying out inspection, testing and certification of completed works
* Reading and updating job schedules via internal systems and completing all project-related documentation
* Liaising with end users where necessary to provide guidance and ensure satisfaction
* Ensuring compliance with relevant health & safety, environmental and electrical regulations
What we are looking for:
* Previously worked as an Electrician, Electrical Technician, Electrical Engineer, Maintenance Engineer, Electrical Installer, Service Engineer or in a similar role.
* Possess 1+ years experience.
* Experience with system controls.
* Must hold a minimum of the 18th Edition qualification.
* Competent and certified domestic electrician with strong installation experience.
* Background working in residential environments with a focus on quality and safety.
* Experience with renewable technologies such as air source heat pumps, solar PV systems, or battery storage would be preferred.
* Strong problem-solving approach with sound technical understanding.
* Full UK driving licence with willingness to travel to sites across London and nearby regions.
* Must have own hand tools (specialist equipment provided where required).
What's on offer:
* Competitive salary
* Company van and fuel card
* Full PPE and uniform provided
* Long-term opportunities within a growing and future-focused sector
This is an exciting chance to join a dynamic organisation that's shaping the future of home energy.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
To support the NCS Gas Engineer operatives with a positive approach to all types of gas-related work to gain the required practical skills and knowledge to become a qualified Gas Engineer
To learn about working in the gas industry through hands-on experience, mentoring and training
To support qualified Gas Engineers with tasks related to gas installation, service and maintenance
Essential personal attributes are attention to detail and practical problem-solving abilities
To have excellent communication skills and work well in a team
Training:
Four days per week in the workplace, at various customer locations, learning on the job from experienced professionals
One day per week day release training at CK Assessment and Training in Nazeing, near Broxbourne, Herts, EN10 6SX, for up to 18 months
Training Outcome:
Full-time job in gas engineering as a domestic gas engineer
Upskilling into commercial gas engineering
Specialist roles within the gas and heating industries
Employer Description:Over the last two decades, NCS has become an established leader in a fast-moving and competitive industry, providing expert plumbing and heating solutions to customers all across the South East. Specialising in fitting gas, oil, LPG, and electric boilers as well as Air Source Heat Pumps. We are proud to be one of Worcester Bosch’s Premier Diamond Installers, committed to ensuring our valued customers get the high quality service they deserve.
Originally based in Ware before moving to our current Hertford offices in 2017, we serve a large domestic and commercial customer base throughout Hertfordshire, London, and wherever our Eco Grant customers need us! We carry out work for local councils, housing associations, schools, commercial businesses, private landlords and, of course, our core domestic customers.
We at NCS believe we have thrived because of the market-leading standards our staff deliver, both in the office and in the field. In emergency cases, such as no heating or hot water, we can also attend on the same day and, if a replacement boiler is required, offer a 24 hour express installation service.Working Hours :Monday-Friday, between 8am-5pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Rolling Mills Process Engineer required to help solve complex non-ferrous or possibly ferrous metals rolling operations problems including: flatness, gauge, mill operation, product performance issues and optimise controller and automation aspects. You will provide high-quality consultancy and technical services to global aluminium industrial customers.
You will have
Degree or equivalent in Engineering, Materials Science, Metallurgy or comparable.
Non ferrous or ferrous, rolling operations experience in a process engineering role.
Hot or cold rolling mills knowledge.
You will be
Delivering customer solutions to existing and new facilities within the metals industry.
Working in an industrial manufacturing environment and on specific projects so work away from home up to 30% of the time.
Take an active role in planning and decision-making activities within the process engineering team. ....Read more...
Embedded Digital Electronics Design Engineer required to design military aerospace technology products. You will have embedded control system design experience in automotive, telecoms, aerospace or medical sectors and degree qualified in electronics.
Key Skills
Embedded controller design in FPGA, Processor and Micro Controllers.
Embedded controller hardware design and development.
Circuit simulation and design in DOORS, SPICE, Saber, SiMetrix, EWB, TINA, Mathcad, MATLAB, Simulink and Xilinx.
Communication protocol design CAN, ARINC and AFDX.
Precision analogue and digital electronics circuit design, LVDTs, Resolvers, Temperature and Pressure Sensors, Solenoids and PWM circuits.
PCB layout and design for signal integrity and EMC.
DFM, DFT designing to cost requirements.
Design verification, test specification and quality reporting.
PCB design, schematic capture and circuit simulation.
Mentor Graphics, Cadence design tools
VHDL, Python and C advantageous.
PCB design in Mentor Graphics or Cadence. ....Read more...
Rolling Mills Process Engineer required to help solve complex non-ferrous or possibly ferrous metals rolling operations problems including: flatness, gauge, mill operation, product performance issues and optimise controller and automation aspects. You will provide high-quality consultancy and technical services to global aluminium industrial customers.
You will have
Degree or equivalent in Engineering, Materials Science, Metallurgy or comparable.
Non ferrous or ferrous, rolling operations experience in a process engineering role.
Hot or cold rolling mills knowledge.
You will be
Delivering customer solutions to existing and new facilities within the metals industry.
Working in an industrial manufacturing environment and on specific projects so work away from home up to 30% of the time.
Take an active role in planning and decision-making activities within the process engineering team. ....Read more...
Embedded Digital Electronics Design Engineer required to design military aerospace technology products. You will have embedded control system design experience in automotive, telecoms, aerospace or medical sectors and degree qualified in electronics.
Key Skills
Embedded controller design in FPGA, Processor and Micro Controllers.
Embedded controller hardware design and development.
Circuit simulation and design in DOORS, SPICE, Saber, SiMetrix, EWB, TINA, Mathcad, MATLAB, Simulink and Xilinx.
Communication protocol design CAN, ARINC and AFDX.
Precision analogue and digital electronics circuit design, LVDTs, Resolvers, Temperature and Pressure Sensors, Solenoids and PWM circuits.
PCB layout and design for signal integrity and EMC.
DFM, DFT designing to cost requirements.
Design verification, test specification and quality reporting.
PCB design, schematic capture and circuit simulation.
Mentor Graphics, Cadence design tools
VHDL, Python and C advantageous.
PCB design in Mentor Graphics or Cadence. ....Read more...
A leading engineering business in the aerospace and defence sector is seeking a Mechanical Design Engineer to join their team. This role will see you working on complex mechanical systems, ensuring all products meet stringent quality and performance standards.
You will be responsible for 3D and 2D modelling, design to manufacture, material selection, and resolving non-conformance issues. The position offers the opportunity to work closely with engineering, production, and quality teams, contributing to high-profile projects within a secure environment.
£50,000 - Permanent
£50 p/hr - Outside IR35
Key Responsibilities
- Carry out detailed design activities to meet manufacturing requirements.
- Conduct root cause and failure mode analysis to resolve non-conformance issues.
- Collaborate with cross-functional teams to implement design improvements and corrective actions.
- Monitor corrective action progress, ensuring timely completion and effectiveness.
- Provide technical guidance to improve product quality and prevent reoccurrence of issues.
- Maintain accurate documentation for non-conformance reports and design changes.
- Contribute to continuous improvement initiatives across manufacturing processes.
Skills & Experience
- Bachelors degree in Engineering or related discipline.
- Experience in aerospace and defence, preferably with heavy engineering, power transmission systems, and gear/gearbox design.
- Proficiency in 3D CAD (ideally Solid Edge) for modelling and manufacturing drawings, including GD&T.
- Knowledge of subsystems impacting mechanical design and structural design methodologies.
- Strong understanding of quality management systems and standards (AS9100, ISO 9001).
- Skilled in root cause and failure mode analysis.
- Strong problem-solving, communication, and teamwork skills.
- Detail-focused with a commitment to quality and continuous improvement.
Security Clearance
Due to project requirements, applicants must be sole UK nationals and eligible for UK Security Clearance.....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
Senior Fire Safety Engineer 📍 London💼 Full-Time | Permanent Purpose of the Role We are looking for an experienced Senior Fire Safety Engineer to provide high-quality fire engineering services across a range of projects. The role involves liaising with clients, managing projects from inception to completion, and mentoring graduate fire engineers. Key ResponsibilitiesDeliver continuous, high-quality fire engineering services, including:Developing fire safety strategies and associated mark-ups for buildings and infrastructure projects.Providing advisory support and conducting site visits during construction.Preparing technical assessments of external wall systems and other fire-related analyses.Conducting CFD and evacuation modelling using software such as FDS/PyroSim and Pathfinder.Performing third-party design reviews and verification.Provide well-supported fire-engineered solutions, drawing on relevant legislation and guidance (e.g., Approved Document B, BS 9999, BS 9991, BS 7974).Manage projects end-to-end, including fee proposals, invoicing, and client liaison.Mentor and supervise graduate fire engineers and other support staff.Contribute to the technical development of the fire engineering team and support directors or senior staff as required.Maintain accurate records to ensure quality procedures, service levels, and contractual requirements are met.Build and maintain strong client relationships and identify business development opportunities.Manage external collaborators and support sustainable development within the fire engineering discipline.Represent the company at industry events, conferences, and training sessions.Support strategic decision-making and contribute to achieving office budgets and financial targets.Deliver external training and technical presentations as required.Qualifications / AccreditationsBachelor’s or Master’s Degree in Engineering (Mechanical, Structural, Civil, or similar).Postgraduate qualification in Fire Engineering (Certificate, Diploma, or Masters).Full membership of the Institution of Fire Engineers (IFE) and working towards or achieved Chartership.Experience & CompetenciesMinimum of 4 years’ experience in fire safety engineering.Strong passion for fire safety and engineering excellence.Excellent communication and client management skills.Ability to work independently, prioritize tasks, and follow instructions within a team environment.Numerate, organised, and detail-oriented.Professional appearance and behaviour, with reliability and integrity.Flexible and adaptable to meet project and client requirements.Desirable SkillsStrong IT skills, particularly Microsoft Word, Outlook, and Bluebeam.....Read more...
Software Tester – Fintech – Bern, Switzerland
(Tech stack: Software Tester, QA Engineer, Test Automation, Manual Testing, Selenium, C#, Postman, REST, SOAP, .NET, Azure, Agile, Scrum, Kanban, QA Analyst, Qualitätssicherung, Test Engineer, ISTQB, UI Testing, API Testing)
We have several fantastic new roles for Software Tester to join a fast-growing and forward-thinking FinTech company that is disrupting the world of private wealth management. This is a rare opportunity to work with a brilliant cross-functional team and help ensure the highest levels of software quality across brand-new, ground-breaking financial platforms.
Our client’s latest product suite has already transformed how clients manage and grow their wealth, offering flexible, scalable and highly personalised financial solutions.
They are seeking talented Software Tester with strong experience in manual and automated testing, along with knowledge of tools like Selenium, Postman, and a general understanding of C#, REST/SOAP APIs, and Azure-based applications. All Software Tester will be working in an Agile environment and contributing to the design, execution, and improvement of testing strategies from the ground up.
The company will also provide training and mentoring in tools and practices such as:
.NET 9, C#, Selenium, JavaScript Testing, REST, SOAP, Azure DevOps, API Testing, Test Automation Frameworks, Agile, BDD, TDD, Cypress, Postman, Performance Testing, and more.
This is your chance to join a greenfield development and testing project—where quality is a first-class citizen and innovation is encouraged at every step.
Benefits Include:
Shares in the company
3 hours of weekly “tech exploration time” to try new tools and ideas
Flexible working hours
Remote work options available
Free yoga sessions at the on-site studio (lunchtime or after work)
Location: Bern, Switzerland / Hybrid Working
Salary: €80,000 – €100,000 + Bonus + Benefits
Applicants must be based in Switzerland and have the right to work in Switzerland.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRSWITZERLANDRECSP
NOIRSWITZERLANDREC
NOIREUROPEREC
NC/CS/BER80100
....Read more...
Software Tester – Fintech – Bern, Switzerland
(Tech stack: Software Tester, QA Engineer, Test Automation, Manual Testing, Selenium, C#, Postman, REST, SOAP, .NET, Azure, Agile, Scrum, Kanban, QA Analyst, Qualitätssicherung, Test Engineer, ISTQB, UI Testing, API Testing)
We have several fantastic new roles for Software Testers to join a fast-growing and forward-thinking FinTech company that is disrupting the world of private wealth management. This is a rare opportunity to work with a brilliant cross-functional team and help ensure the highest levels of software quality across brand-new, ground-breaking financial platforms.
Our client’s latest product suite has already transformed how clients manage and grow their wealth, offering flexible, scalable and highly personalised financial solutions.
They are seeking talented Software Testers with strong experience in manual and automated testing, along with knowledge of tools like Selenium, Postman, and a general understanding of C#, REST/SOAP APIs, and Azure-based applications. You’ll be working in an Agile environment and contributing to the design, execution, and improvement of testing strategies from the ground up.
The company will also provide training and mentoring in tools and practices such as:
.NET 9, C#, Selenium, JavaScript Testing, REST, SOAP, Azure DevOps, API Testing, Test Automation Frameworks, Agile, BDD, TDD, Cypress, Postman, Performance Testing, and more.
This is your chance to join a greenfield development and testing project—where quality is a first-class citizen and innovation is encouraged at every step.
Benefits Include:
Shares in the company
3 hours of weekly “tech exploration time” to try new tools and ideas
Flexible working hours
Remote work options available
Free yoga sessions at the on-site studio (lunchtime or after work)
Location: Bern, Switzerland / Hybrid Working
Salary: €80,000 – €100,000 + Bonus + Benefits
Applicants must be based in Switzerland and have the right to work in Switzerland.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRSWITZERLANDRECSP
NOIRSWITZERLANDREC
NOIREUROPEREC
NC/DK/BER80100....Read more...
Job Title: Fire Door Installer / Remedials Engineer Location: Contracts across North & East London (primarily Social Housing) Salary: £37,000 – £42,000 per annum (dependent on experience) + Company Van + Fuel CardHours: Monday to Friday (optional overtime available on Saturdays) About Us We are a family-run business specialising in the design, manufacture, installation, and maintenance of fire protection solutions. With a strong reputation across London, we pride ourselves on quality workmanship, reliability, and providing our team with opportunities for professional growth and development. The Role We are seeking an experienced Fire Door Installer / Remedials Engineer to join our growing team. You will be responsible for the installation, maintenance, and remedial works of fire doors across social housing contracts in North and East London. This is a fantastic opportunity to join a supportive business that values its employees and offers genuine career progression. Key ResponsibilitiesInstalling new fire doors to a high standard in line with regulations and manufacturer guidelines.Carrying out remedial works and maintenance on existing fire doors.Completing associated carpentry works as required.Undertaking fire-stopping works (desirable but not essential).Ensuring all work is compliant with health & safety and fire safety standards.Delivering excellent customer service to residents and clients.RequirementsPrevious experience installing and maintaining fire doors (essential).NVQ Level 2 in Carpentry (ideal, but not essential with the right experience).Knowledge of fire safety and fire-stopping works (advantageous).Clean UK Manual Driving Licence (essential).Strong attention to detail and commitment to high-quality work.Ability to work independently as well as part of a team.BenefitsCompetitive salary (£37,000 – £42,000 PA, dependent on experience).Company van + fuel card provided.Optional Saturday overtime available.Career progression opportunities within a growing family-run business.Supportive and friendly working environment.How to ApplyIf you are an experienced Fire Door Installer looking to join a forward-thinking company where you can develop your career, we’d love to hear from you.....Read more...
