Quality Inspector
Quality Inspector Salary: £33,000 £36,000 per annum
Location: New Milton
A leading precision engineering company based in New Milton is seeking an experienced Quality Inspector to join their growing team. This company specialises in the manufacture of high-performance components for the aerospace and allied sectors, with over 60 years of subcontract manufacturing expertise and a strong reputation for quality.
Quality Inspector Responsibilities:
- Inspect raw materials and finished products for defects, FOD, or transit damage.
- Use a range of inspection tools including CMM equipment, hardness testers, and conductivity inspection tools.
- Carry out dimensional inspections using precision measuring instruments.
- Complete First Article Inspection Reports (FAIR) and associated documentation.
- Conduct final inspections, both dimensional and visual.
- Report non-conformances using the internal IRN process.
- Contribute to process development and quality improvement activities.
- Apply training effectively to support quality assurance.
- Maintain a strong commitment to health, safety, and quality standards.
Quality Inspector Requirements:
- Proven experience as a Quality Inspector in an engineering or manufacturing environment.
- Familiarity with dimensional inspection techniques and tools.
- Knowledge of CMM, Eddy Current Testing (Level 1), and Hardness & Conductivity Testing (Level 2) is beneficial but not essential.
- Good understanding of engineering drawings and inspection paperwork.
- Positive attitude and strong teamworking skills.
Whats on Offer:
- Full-time permanent position
- Competitive salary (£33,000£36,000 depending on experience).
- Flexible start/finish times and choice of working patterns.
- Employee Assistance Programme (EAP).
- Occupational health support.
- Salary exchange pension scheme.
- Holiday buy/sell options.
- Overtime opportunities.
- Ongoing personal development.
This is a fantastic opportunity for a Quality Inspector who values quality, precision, and continuous improvement. Whether youre an experienced Quality Inspector looking for a new challenge or ready to step into a dynamic manufacturing environment, this role could be the ideal next step in your career.
How to Apply for the Quality Inspector Position
Apply now, or for more information on the Quality Inspector role, contact Hayden at Holt Engineering on 07955 081 482.....Read more...
Chief Quality Inspector
Location: Reading
Salary: c. £45k
Holt Engineering are seeking a highly experienced and meticulous Chief Quality Inspector to join our clients dynamic team. If you possess a strong background in precision engineering, a deep understanding of aerospace quality standards, and proficiency in Aberlink CMM operation, we want to hear from you!
Chief Quality Inspector Overview:
As our Chief Mechanical Quality Inspector, you will be responsible for ensuring the highest quality standards are met throughout our manufacturing processes, particularly in the production of aerospace components and sheet metal fabrications. You will lead a team of inspectors, oversee inspection procedures, and utilise your expertise with Aberlink CMM to guarantee dimensional accuracy and compliance.
Chief Quality Inspector Responsibilities:
- Develop and implement inspection procedures and quality control plans.
- Perform detailed inspections of aerospace components and sheet metal fabrications using Aberlink CMM and other precision measuring equipment.
- Program and operate Aberlink CMM to perform complex dimensional inspections.
- Interpret engineering drawings, specifications, and GD&T (Geometric Dimensioning and Tolerancing).
- Identify and resolve quality issues, implementing corrective and preventative actions.
- Maintain accurate inspection records and documentation.
- Ensure compliance with AS9100 and other relevant aerospace quality standards.
- Conduct internal audits and participate in external audits.
Chief Quality Inspector Requirements:
- Extensive experience as a Quality Inspector in the aerospace industry.
- Proven proficiency in programming and operating Aberlink CMM.
- Strong understanding of aerospace quality standards (AS9100).
- Experience with sheet metal fabrication inspection.
- Expertise in interpreting engineering drawings and GD&T.
- Excellent knowledge of precision measuring equipment and techniques.
- Excellent problem-solving and analytical skills.
- Strong attention to detail and a commitment to quality.
Chief Quality Inspector Benefits:
- 4 day working week.
- Competitive salary based on experience and skills.
- Opportunity for professional growth and development in a leading aerospace company.
- Access to state-of-the-art inspection equipment and technology.
- Supportive and collaborative team environment.
- Overtime opportunities may be available.
How to apply for the Chief Quality Inspector role:
If you have the skills required, please apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk....Read more...
Quality Inspector
Salary dependent on experience
Location Tamworth
We are working with a recognised and renowned precision engineering group of businesses in the Tamworth area that are looking for a Quality Inspector on a permanent contract with an immediate start.
Quality Inspector responsibilities:
- Working within the AS9100, ISO9001 & ISO17025 standards.
- Programming and use of CMM (Mitutoyo software).
- Able to interpret engineering drawings and inspect to those requirements.
- Use of general measuring equipment including micrometers, surface testers and contour tracers.
- Working with First Article Reporting methods for aerospace and automotive.
Quality Inspector requirements:
- Experience of CMM programming and Gear Measuring Machine measuring, preferably in Mitutoyo.
- Knowledge of AS9100 Rev D, ISO9001: 2015 & ISO17025: 2017.
- Experience of working with Aerospace / Automotive OEMs.
- Compiling of FAIR reports for customers.
How to apply for this Quality Inspector role:
If you are interested in finding out more about the Quality Inspector role, get in touch with Harry Parsons on 07739277675, or email at harry.parsons@holtengineering.co.uk.....Read more...
Job description
Holt Engineering is currently working with an innovative manufacturing company based in Portsmouth, who are on the lookout for a Quality Inspector.
A well-established company, with years of experience providing the design and manufacture of electrical and assembly products, they are based in a modern facility in Hampshire with a close-knit and friendly team right at the centre of all they do.
This role is offering a Temporary to Permanent contract, working Monday to Thursday 7:30-4:00 with an early finish on Friday!
This role is paying between £13 - £13.50ph (depending on experience)
As a Quality Inspector, you will be:
- Quality checking assemblies
- Quality checking labels
- Testing of products
- Supporting the inspection team
To be a successful Quality Inspector you must:
- Quality inspection in an electrical manufacturing background
- Good attention to detail
- Experience of reading technical drawings
- IPC-620 soldering standards (preferable)
- Testing experience (desired not essential)
Benefits for the successful Quality Inspector:
- A competitive pay structure
- Training
- Friendly work environment
- Early finish on Fridays
Sound like a good fit for a Quality Inspector?
Please call Sam on 07485 390946 or APPLY NOW
All calls are recorded for training and quality purposes. Further details are shown within our Privacy Policy which is displayed on our website
In line with the requirements of the Asylum and Immigration Act 1996, all applicants must be eligible to live and work in the UK As part of the recruitment process, you will be asked to provide documented evidence of eligibility please make sure you have this updated.....Read more...
Vehicle Quality Inspector – Bradford £14 per hour | Monday to Friday | Half-Day Fridays |
Are you passionate about quality and precision? We're looking for a Vehicle Quality Inspector to join a well-established and modern manufacturing business in Bradford. This is a fantastic opportunity to work in a clean, bright, and forward-thinking environment.
As our Vehicle Quality Inspector, you’ll be responsible for inspecting and testing both mechanical and electrical assemblies to ensure they meet the highest standards before release.
Key Responsibilities Of Our Vehicle Quality Inspector:
Perform final inspections on completed vehicle assemblies
Inspect both mechanical and electrical components
Complete detailed release paperwork and ensure compliance standards are met
Test mechanical and electrical sub-assemblies
What We Offer as Our Vehicle Quality Inspector:
Starting pay of £14 per hour
Day shifts, Monday to Friday, with an early finish on Fridays
25 days holiday plus statutory bank holidays
Overtime available at a premium rate after 12-week temp-to-perm period
What We’re Looking For:
Previous experience in inspection/testing within a mechanical or engineering environment
Confident using Microsoft Office tools
Ability to read and interpret engineering drawings
If this sounds like the right fit for you, apply now or get in touch with Grace at E3 Recruitment for more information.....Read more...
Quality Inspector required for an industry leading, precision engineering company in the Huddersfield area. 4 day working week, 33 days holiday and an extensive benefits package are all available to the successful candidate. The core purpose of the quality inspector/technician is to protect the business from quality concerns by providing measurements and control of components and finished product.
Benefits: Take a look at the extremely competitive benefits offering!
Starting salary of £35,000 per annum DOE
Flexible Work Schedule – Enjoy a 4-day working week with compressed hours (Monday–Thursday or Tuesday–Friday), giving you more time for life outside work.
Receive 33 days of annual leave including Bank Holidays (pro rata), with the option to buy up to 5 extra days through our Holiday Buy Scheme.
Benefit from up to 8% employer contributions to your pension, Enhanced Company Sick Pay, and Life Assurance of 2x salary (or 4x if enrolled in the pension scheme).
Health & Wellbeing Support – Access a Health Cash Back Plan (covering GP, dental, physiotherapy, and more), free DSE eye test vouchers, and mental health resources including trained Mental Health First Aiders.
Employee Assistance Programme – Confidential support including face-to-face counselling and the Wisdom App by Health Assured for mental health, nutrition, and general wellbeing.
Enjoy discounts, cashback, and special offers on major high street stores, travel, gyms, cinema, show tickets, and more.
Free car parking (worth £1,500–£2,500 annually), a Cycle to Work Scheme, and access to Costco membership for just the annual fee.
Key Responsibilities of the Quality Inspector will include:
Carry out dimensional and visual inspection of components and assemblies
Assist in the general operation of the Quality Control department
Provide technical assistance and problem resolution on customer, auditors and 3rd party internal quality control issues
For the role of Quality Inspector, we are keen to receive applications from individuals who have:
Time-served apprentice with a Quality / Manufacturing background.
Valve / process industry experience is an advantage.
Hands-on experience in a shop-floor environment.
Experience in the use of Quality Tools.
Experienced user of CMMs, including Faro Arm, Fixed CMMs, and in particular, Aberlink and PC-DMis software.
Knowledge of alloys, casting, NDT, welding, and coating processes would be advantageous.
To apply for the Quality Inspector position, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Conor Wood at E3 Recruitment for more information.
....Read more...
Quality Inspector Location: Sittingbourne, KentHours: Monday to Thursday 08:00 to 16:45, Friday 08:00 to 12:00 (37 hours per week)Pay: £28,000 to £30,000 p.a.Overtime: Time and a half up to 13 hrs per weekAre you a hands-on Quality Inspector looking for your next role? Are you an expert on ISO 9001:2015 QMS? We’re working on behalf of a prestigious and established manufacturing business with a strong history in the defence and aerospace sectors.Due to our growth, they are looking for 2 x Quality Inspectors to join their team.What You’ll Be Doing: Quality Inspector • Inspecting parts and materials, making sure they meet project standards• Investigating any non-conforming parts and working with suppliers to fix issues• Conducting First Article Inspections (FAI) to AS9102 standards• Managing product releases and document reviews in their ERP systemWhat We’re Looking For: Quality Inspector • At least 3 years’ experience in a similar quality role• Strong knowledge of ISO 9001:2015 QMS• Comfortable using Microsoft Office (Word, Excel, etc.)• Good at solving problems, with a sharp eye for detail• Able to read and understand engineering drawings• Full UK Driving LicencePerks:• Company pension• Life Assurance (4x salary)• Free parking on site• Plus more!If you're passionate about quality and want to work on exciting projects in a supportive, growing team, we’d love to hear from you. Apply now!Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment Agency Due to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion. ....Read more...
Quality Inspector Location: Sittingbourne, KentHours: Monday to Thursday 08:00 to 16:45, Friday 08:00 to 12:00 (37 hours per week)Pay: £28,000 to £30,000 p.a.Overtime: Time and a half up to 13 hrs per weekAre you a hands-on Quality Inspector looking for your next role? Are you an expert on ISO 9001:2015 QMS? We’re working on behalf of a prestigious and established manufacturing business with a strong history in the defence and aerospace sectors.Due to our growth, they are looking for 2 x Quality Inspectors to join their team.What You’ll Be Doing: Quality Inspector • Inspecting parts and materials, making sure they meet project standards• Investigating any non-conforming parts and working with suppliers to fix issues• Conducting First Article Inspections (FAI) to AS9102 standards• Managing product releases and document reviews in their ERP systemWhat We’re Looking For: Quality Inspector • At least 3 years’ experience in a similar quality role• Strong knowledge of ISO 9001:2015 QMS• Comfortable using Microsoft Office (Word, Excel, etc.)• Good at solving problems, with a sharp eye for detail• Able to read and understand engineering drawings• Full UK Driving LicencePerks:• Company pension• Life Assurance (4x salary)• Free parking on site• Plus more!If you're passionate about quality and want to work on exciting projects in a supportive, growing team, we’d love to hear from you. Apply now!Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment Agency Due to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion. ....Read more...
General purpose:
The Apprentice Sheet Metal Fabricator will spend time within the sheet metal fabrication cell and will learn about fine limit sheet metal processes and procedures. The apprentice will be involved with manufacturing aerospace components made from aluminium, stainless and mild steel.
The apprentice will operate within the mandatory customer and internal specifications and inspect products accordingly. The Apprentice Sheet Metal Fabricator will learn how to effectively and safely use fly presses, brake press, waterjet and welding.
Key deliverables:
Manufacture aerospace components according to procedures and instructions provided
Setting and operating machinery used in the manufacture of sheet metal components
Learning and efficiently operating hand tools, deburring tools, drills, fly presses
Learning and efficiently operating TIG welders, spot welders
Learning and efficiently operating waterjet
Verify the conformity of parts, assemblies and sub-assemblies in line with engineering drawings, the quality management system and any special customer requirements
Identify and report non-conformance as per the Company procedure
Ensure compliance with Quality Assurance and Health Safety Environment policies and procedures
Training:
Level 2 Welder Apprenticeship (Standard)
Skills, Knowledge and Behaviours
Day release to attend New City College, Rainham campus (RM13 8GP)
Training Outcome:Upon successful completion of the Apprenticeship, progression to the following opportunities could be available, depending upon the needs of the company at that time.
CNC Miller/Setter/Operator
CNC Turner/Setter/Operator
Highly skilled Miller/Turner
Deputy Cell Leader
Cell Leader
Manufacturing Engineer
Quality Control Inspector
Lead Quality Control Inspector
NDT Inspector
Employer Description:Xcel Aerospace is a leader in delivering manufacturing excellence within the global aerospace market. We provide high quality components and assembly parts and our strong reputation as a world class supplier of manufactured aerospace components supports thousands of fight hours every year.Working Hours :Monday - Friday, 9 hours per day (TBC) with 30-minute lunch break. Start time may vary.Skills: Good numerical skills,Able to measure calculations,Good verbal communicator,Good writing skills,Team working skills,Able to use own initiative,Able to work to time scales,Promote quality standards,Good organisational skills,Ability to prioritise work,Display a positive attitude,Enthusiastic learner,Eager to learn....Read more...
The Apprentice CNC Machinist will spend time within the machine shop and will learn about CNC milling and CNC turning. The apprentice will be involved with manufacturing aerospace components made from aluminium, stainless and mild steel.
The apprentice will operate within the mandatory customer and internal specifications and inspect products accordingly. The Apprentice CNC Machinist will learn how to effectively and safely operate and setup 3-axis CNC machining centres, and lathes.
Key Deliverables:
Perform tool setting, machine maintenance, machine loading, de-burring of components, loading CNC program of components, inspection of components and updating of system to achieve current status of workload
To understand and interpret Engineering drawings including GD&T and to use a range of standard and special measuring equipment as well as working closely with QC to achieve high ‘First off’ pass rates and to liaise with QC to resolve issues and eliminate repeat failures
To have an understanding of cutting tool and component materials and their effect on productivity. The importance of correct tool selection, an understanding of cutting tool conditions including rigidity, speeds, feeds, lubrication and their application and effect. Also, to understand tool failure and to recognise causes and take appropriate action to rectify
To understand and apply safe and appropriate work holding methods and techniques to satisfy component requirements, including manual and automatic chucks, vices, direct clamping (to machine tables) and special jigs and fixtures
Verify the conformity of parts, assemblies and sub-assemblies in line with engineering drawings, the quality management system and any special customer requirements
Identify and report non-conformance as per the Company procedure
Ensure compliance with Quality Assurance and Health Safety Environment policies and procedures
Requirements:
Able to work within tight time scales whilst maintaining and promoting quality standards
Good organisational and prioritisation skills
Confidence to challenge product progression in the event of non-conforming discovery
Training:
Level 2 Engineering Operative Apprenticeship Standard
Skills, Knowledge and Behaviours
Day release to attend New City College, Rainham campus (RM13 GP)
Training Outcome:Upon successful completion of the Apprenticeship, progression to the following opportunities could be available, depending upon the needs of the company at that time.
CNC Miller/Setter/Operator
CNC Turner/Setter/Operator
Highly skilled Miller/Turner
Deputy Cell Leader
Cell Leader
Manufacturing Engineer
Quality Control Inspector
Lead Quality Control Inspector
NDT Inspector
Employer Description:Xcel Aerospace is a leader in delivering manufacturing excellence within the global aerospace market. We provide high quality components and assembly parts and our strong reputation as a world class supplier of manufactured aerospace components supports thousands of flight hours every year.Working Hours :Monday - Friday 9 hours per day with 30 minute lunch break. Start time may vary. Shifts to be confirmed.Skills: Good numerical skills,Able to measure calculations,Good verbal communicator,Good writing skills,Team working skills,Able to use own initiative,Able to work to time scales,Promote quality standards,Good organisational skills,Ability to prioritise work,Display a positive attitude,Enthusiastic learner,Eager to learn....Read more...
Holt Engineering is proud to be exclusively partnered with a leading UK defence company, situated in the heart of the stunning Dorset coastline in Poole.
Known for innovation, precision, and delivering excellence to some of the worlds most demanding engineering sectors, this is your opportunity to join a company that truly values quality.
We are currently seeking a highly skilled Electrical Quality Control Inspector to strengthen the quality team and uphold the companys industry-leading standards in aerospace and defence technology.
Your Mission As an Electrical QC Inspector, you will play a vital role in ensuring that electrical assemblies, cable looms, and piece parts meet all required specifications, standards, and workmanship expectations. You'll work hands-on within production, identifying and logging non-conformances, and collaborating across departments to deliver Right First Time results.
Key Responsibilities of an Electrical QC:
- Inspect electrical assemblies and components against IPC 610/620 standards (preferably certified to trainer level)
- Conduct line and roving inspections, raising and recording any non-conformances
- Validate wiring and component layouts using technical drawings, schematics, and wiring schedules
- Assist in root cause investigations and support continuous improvement activities
- Maintain meticulous inspection records via internal MRP and quality systems
- Actively contribute to production and QA meetings
- Support manufacturing with pre-closure checks to ensure top-tier output quality
What You Bring as a Electrical QC:
- Minimum 2 years experience in electrical quality control within aerospace or defence
- IPC-A-610 and IPC/WHMA-A-620 expertise (Trainer certification highly desirable)
- Skilled in interpreting complex wiring diagrams, drawings, and specs
- Comfortable using Microsoft Office and MRP systems
- Strong communicator, confident working both independently and as part of a team
- Calm under pressure, detail-focused, and solutions-driven
- A professional and proactive mindset with a passion for quality
Why Join?
- Work for a globally respected defence organisation
- Stunning Poole location work minutes from the Jurassic Coast
- Excellent salary and benefits package
- Supportive, quality-focused culture
- Be part of a team that makes a difference on a global scale
Interested?
For more information or to apply, contact Ian at Holt Engineering on 07734 406996 or email your CV today.
Your next opportunity in the defence industry starts here.....Read more...
JOB DESCRIPTION
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting. Documents include electronic, hard or soft copies. This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor. The Field Resource Inspector will work independently or with other resources depending on the task being performed. The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus. The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services. Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services. They are to be on time and complete work scheduled. The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication. All required job information should be completed promptly via the required tools and resources. Must be familiar with all forms of low slope roofing systems. Must be knowledgeable with Tremco line of products and proper applications Daily responsibilities include, but are not limited to: Review and confirm all work orders scheduled. Completion of all safety related activities using the designated tools mandated by Tremco Take photos to document phases of work performed on the job
Job Site Inspection specific: Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific Check materials for specification compliance, material type and proper storage Walk the roof with the Foreman. Address proper drainage, staging, application and details Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
To Apply: https://careers.tremcoinc.com/page/wti
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
We are seeking experienced Commercial Roofing Inspectors to join our team.
$20-33/hour (not including prevailing wage)
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting. Documents include electronic, hard or soft copies. This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor. The Field Resource Inspector will work independently or with other resources depending on the task being performed. The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus. The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services. Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services. They are to be on time and complete work scheduled. The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication. All required job information should be completed promptly via the required tools and resources. Must be familiar with all forms of low slope roofing systems. Must be knowledgeable with Tremco line of products and proper applications Daily responsibilities include, but are not limited to: Review and confirm all work orders scheduled. Completion of all safety related activities using the designated tools mandated by Tremco Take photos to document phases of work performed on the job
Job Site Inspection specific: Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific Check materials for specification compliance, material type and proper storage Walk the roof with the Foreman. Address proper drainage, staging, application and details Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting. Documents include electronic, hard or soft copies. This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor. The Field Resource Inspector will work independently or with other resources depending on the task being performed. The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus. The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services. Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services. They are to be on time and complete work scheduled. The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication. All required job information should be completed promptly via the required tools and resources. Must be familiar with all forms of low slope roofing systems. Must be knowledgeable with Tremco line of products and proper applications Daily responsibilities include, but are not limited to: Review and confirm all work orders scheduled. Completion of all safety related activities using the designated tools mandated by Tremco Take photos to document phases of work performed on the job
Job Site Inspection specific: Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific Check materials for specification compliance, material type and proper storage Walk the roof with the Foreman. Address proper drainage, staging, application and details Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
To Apply: https://careers.tremcoinc.com/page/wti
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
We are looking for a PDI Technician for a market-leading commercial dealership, looking to add to their quality team based in Westbury. Paying up to £33,400 DOE, Permanent position, 40-hour working week, Monday to Friday.
What’s in it for you as a PDI Technician:
Paying up to £33k DOE. OTE £41,000
Overtime paid at 1.5x
40 hours working week, Monday to Friday
Permanent position
28 days holiday
A day off for your birthday
Auto-enrolment pension scheme
Training and progression opportunities
Reward and recognition schemes
The PDI Technician role provides great prospects for training and career growth. As a Vehicle Pre-Delivery Inspector, you'll be part of an innovative company that values its team and invests in employee development.
We would welcome people to apply who may have worked as a Light Vehicle Technician, Vehicle inspector, HGV Fitter or HGV Technician, Car Mechanic, or have some exposure working with vehicles in a mechanical capacity.
Main duties & responsibilities of the PDI Technician role:
To ensure that every vehicle is systematically tested by the specified procedure
To confirm that every vehicle complies with the customer's specification
Ensure that all faults or discrepancies are recorded in a systematic manner
Experience required for the PDI Technician role:
Experience in the automotive sector
mechanical knowledge
If you are interested or have further questions regarding the PDI Technician, please give Maisie Cope a call at E3 Recruitment.....Read more...
To provide general office support to a team of Housing Support Workers, Property Inspectors and other Housing staff, ensuring accurate data entry and updating a range of systems. To provide customers with a knowledgeable and professional first point of contact on the telephone, in writing and in person.
To work as part of a team to deliver excellence, solve problems and deliver value for residents.
Key responsibilities:
Be the first point of contact for housing services, receiving enquiries from customers by telephone, by letter and electronically, and provide information and advice on housing services aiming to resolve problems immediately, where possible.
Develop and maintain a good working knowledge of housing services and procedures and ensure that procedures are followed when dealing with customer enquiries and requests.
Deal with difficult situations in a way that tries to resolve issues for the customer, seeking assistance from the Contracts Manager, Housing Support Manager or Senior Property Inspector when necessary.
Ensure ICT skills are up to date and meet developing needs, using Microsoft packages for producing written information and analysing data.
To assist the Housing Assistant when required to ensure all office administrative work,including updating the database and accurately scanning documentation, as directed by the Contracts Manager, or Housing Support Managers.
Assist the Housing Support Workers and Property Inspector in processing and updating information around repairs, safety certificates, lettings, key returns, void properties and liaise with the provider to ensure voids are completed on time, notifying the financial controller where rent stops are required.
To assist the Income Officer in processing requests for tenancy information, refunds, rent statements, direct debits, references, and letters etc.
To assist the Income Officer in resolving benefit queries by liaising with the Housing Benefit Team/customers and providing any rent information to customers as and when required.
Assist with compiling and co-ordinating statistical data for the Contracts Manager, Income Officer and Housing Support Manager.
Responsible for co-ordinating information for the monthly performance dashboard.
Provide active cover and support across the service and assist in the training and induction of new members of staff and work experience students.
Maintain accurate, up to date records and collect data and information in relation to all District Homes tenancies, ensuring achievement of internal and external targets.
To assume any other reasonable functions, duties and responsibilities as requested by the Contracts Manager, Housing Support Manager or Senior Property Inspector which are within the reasonable competence of the postholder.
Personal commitment to ensure diversity is positively valued, resulting in equal access and treatment in employment, service delivery and communications.
Personal commitment to continuous self-development and service improvement.
Work collaboratively with colleagues and cover for colleagues during absences.
Support the Operations Director and managers in ensuring a healthy and safe working environment for clients and staff and undertake other duties as required.
Comply with District Homes’ standards of information governance, data security and protection, and documented systems and procedures.
Training:Training will take place on-site at the employer with a tutor from Rochdale Training.Training Outcome:Progression is in place for candidates who excel in their role.Employer Description:District Homes, was established in 2013. Our main objective as a housing association is to offer landlords a very reliable, efficient and competitive Guaranteed Rental service that they could trust and depend upon and secondly, to offer London local authorities, seeking social housing, better value for money and much better quality accommodation in the private rented sector, for their tenants.Working Hours :Monday to Friday, 9.00am to 5.00pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills....Read more...
Role & responsibilities:
As an apprentice Inspector, the candidate will be learning to inspect seamless steel cylinders and cylinder components in accordance with specifications and engineering drawings. This will be aided by the use of various inspection equipment such as micrometres, Verniers and gauges etc. whilst undergoing your training, which is a mixture of full-time at the AMRC training centre followed by day release and on-the-job training.
Once qualified, the candidate will be performing in-process inspection checks on products in a safe and controlled manner, meeting all quality specifications whilst satisfying productivity requirements and in compliance with engineering drawings and associated specifications. Ensure that equipment is maintained, relevant records are up-to-date and that all processes work effectively to ensure that the business can fulfil its aims.Training:You will study on a Level 3 Engineering & Manufacturing Support Technician pathway. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:Based near Meadowhall, we have over 125-years of experience specialising in delivering high-pressure gas containment solutions for industries like defence, energy, and transportation. Our expertise ensures bespoke, safety-critical systems that meet the highest standards of quality and performance worldwide.Working Hours :You will work Monday to Friday. Your start and finish times, including your shift pattern, will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
Key Responsibilities:
Emergency Response:
Respond to emergency calls and provide prompt and effective medical care to patients in various situations, including accidents, illnesses, and emergencies
Assess the medical needs of patients and provide appropriate treatment in accordance with established protocols
Patient Care:
Deliver high-quality patient care, ensuring the safety and comfort of individuals during transportation and treatment
Assist in managing patients with a range of medical conditions, providing emotional support and reassurance
Skills Development:
Participate in training sessions and practical exercises to develop clinical skills, including administering medications, performing basic life support, and using medical equipment
Work towards achieving required competencies, including communication skills, teamwork, and adherence to health and safety protocols
Documentation and Reporting:
Maintain accurate records of patient assessments, treatments provided, and any incidents during transport
Ensure all documentation is completed according to legal and organisational standards
Team Collaboration:
Work closely with ambulance crew members and other healthcare professionals to ensure that care is delivered in a coordinated manner
Participate in debriefing sessions after emergency calls to discuss outcomes and areas for improvement
Training:Associate Ambulance Practitioner Level 4 Apprenticeship Standard:
As an Ambulance Paramedical Apprentice, you will undergo structured training that combines practical experience with theoretical learning
You will gain the skills and knowledge necessary to pursue a successful career in emergency medical services, with support from qualified mentors throughout the apprenticeship
Training Outcome:
The successful apprentice will be promoted as an Operations executive or manager
Employer Description:Health Tech Services Group (HTSG) Limited is a leading innovator in the healthcare industry. It leverages cutting-edge technologies such as facial recognition, artificial intelligence (AI), and machine learning (ML) to provide comprehensive solutions for safeguarding vulnerable adults and delivering doorstep healthcare services. In addition to its core services, HTSG offers in-house Continuing Professional Development (CPD) training courses to upskill its team members and support the broader care industry and corporate sectors in building knowledgeable and proficient teams.
HTSG Core Services:
ab-1-4
Care Safe Mobility: HTSG works with 24-hour non-emergency patient transport and ambulance services and offers bed-to-bed transportation services for hospitals, clinics, and laboratories, ensuring these services are readily and easily accessible. Under the process of registering. Care Safe Mobility was earlier registered with the CQC (https://www.cqc.org.uk/location/1-9966471035)
ab-cah-1-5
Clinic At Home: HTSG provides doorstep healthcare services, including home visits by qualified healthcare professionals for medical assessments, treatment and ongoing care management. Through remote patient monitoring devices and telehealth platforms, HTSG enables continuous patient health status monitoring, facilitating early intervention and personalized care by implementing digital safeguarding measures for vulnerable adults using facial recognition technology and AI-powered algorithms.
ab-watch-1-4
WatchRx: HTSG offers remote patient monitoring services to vulnerable adults designed to improve patient outcomes, enhance quality of life and promote independence. Our services include a Medicine reminder system, Fall prevention technology, Geo-fencing capabilities and Automated vitals collection. The benefits of our remote patient monitoring services include improved health outcomes, enhanced safety and independence, cost-effective healthcare and personalized care management. We are committed to leveraging technology to empower vulnerable adults and support their healthcare needs. By monitoring and analyzing behavioural patterns in real-time, HTSG can proactively identify and mitigate potential risks, ensuring the safety and well-being of vulnerable individuals.
CPD Training Courses: HTSG offers in-house CPD training courses designed to enhance the skills and knowledge of its team members. These courses cover a wide range of topics relevant to the healthcare industry, including best practices in patient care, regulatory compliance, and the latest advancements in healthcare technology. Additionally, HTSG extends its training programs to external stakeholders in the care industry and corporate sectors, aiming to foster a skilled and competent workforce.
Air Ambulance (AmbuFly): HTSG includes Global Medical Tourism Services so you can get the best of World-Class treatment from your comfort and convenience.
We are fully insured and locally regulated by the Care Quality Commission* (CQC), Health Inspector Wales (HIW), and local Councils. We are also working on our ISO* 9001, 14001, 27001, and Cyber Essentials. So, you and your data are fully protected. For more information or partnership opportunities, don’t hesitate to contact us.
Our Expertise
HTS Group offers technology and support that facilitates round-the-clock, UK-wide access to services for corporate, insurance, or self-paying clients in the following sectors:
Healthcare assessment and management
Medical transport and repatriation (road & air)
Diagnostics (Laboratories and Radiology)
Healthcare and management training
Pharmacies
Healthcare R & D
Healthcare Logistics
Medical TourismWorking Hours :Monday - Friday, 9.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Key Responsibilities:
Administrative Support:
Assist in the day-to-day operations of the office, providing administrative support to various departments
Maintain accurate records and ensure that all documentation is organised and up-to-date
Communication:
Handle incoming and outgoing correspondence, including emails, phone calls, and mail
Assist in scheduling meetings and coordinating appointments for team members
Data Management:
Input, update, and manage databases to ensure the accuracy and confidentiality of sensitive information
Assist with preparing reports, presentations, and other documents as needed
Customer Service:
Provide friendly and professional support to clients and service users, addressing inquiries and resolving issues when necessary
Collaborate with team members to enhance the customer experience and support service delivery
Financial Administration:
Assist with basic financial functions, such as invoicing, processing payments, and reconciliation of financial records
Project Support:
Support project management tasks, including tracking progress and assisting in project-related activities
Training:
As a Level 3 Business Administrator Apprentice, you will receive structured training that includes hands-on experience, mentorship, and study as part of the apprenticeship program
You will acquire practical skills and knowledge applicable to a career in business administration, setting a solid foundation for future career growth at the Essex office
Training Outcome:
This may lead to a Business or operations executive/manager
Employer Description:Health Tech Services Group (HTSG) Limited is a leading innovator in the healthcare industry. It leverages cutting-edge technologies such as facial recognition, artificial intelligence (AI), and machine learning (ML) to provide comprehensive solutions for safeguarding vulnerable adults and delivering doorstep healthcare services. In addition to its core services, HTSG offers in-house Continuing Professional Development (CPD) training courses to upskill its team members and support the broader care industry and corporate sectors in building knowledgeable and proficient teams.
HTSG Core Services:
ab-1-4
Care Safe Mobility: HTSG works with 24-hour non-emergency patient transport and ambulance services and offers bed-to-bed transportation services for hospitals, clinics, and laboratories, ensuring these services are readily and easily accessible. Under the process of registering. Care Safe Mobility was earlier registered with the CQC (https://www.cqc.org.uk/location/1-9966471035)
ab-cah-1-5
Clinic At Home: HTSG provides doorstep healthcare services, including home visits by qualified healthcare professionals for medical assessments, treatment and ongoing care management. Through remote patient monitoring devices and telehealth platforms, HTSG enables continuous patient health status monitoring, facilitating early intervention and personalized care by implementing digital safeguarding measures for vulnerable adults using facial recognition technology and AI-powered algorithms.
ab-watch-1-4
WatchRx: HTSG offers remote patient monitoring services to vulnerable adults designed to improve patient outcomes, enhance quality of life and promote independence. Our services include a Medicine reminder system, Fall prevention technology, Geo-fencing capabilities and Automated vitals collection. The benefits of our remote patient monitoring services include improved health outcomes, enhanced safety and independence, cost-effective healthcare and personalized care management. We are committed to leveraging technology to empower vulnerable adults and support their healthcare needs. By monitoring and analyzing behavioural patterns in real-time, HTSG can proactively identify and mitigate potential risks, ensuring the safety and well-being of vulnerable individuals.
CPD Training Courses: HTSG offers in-house CPD training courses designed to enhance the skills and knowledge of its team members. These courses cover a wide range of topics relevant to the healthcare industry, including best practices in patient care, regulatory compliance, and the latest advancements in healthcare technology. Additionally, HTSG extends its training programs to external stakeholders in the care industry and corporate sectors, aiming to foster a skilled and competent workforce.
Air Ambulance (AmbuFly): HTSG includes Global Medical Tourism Services so you can get the best of World-Class treatment from your comfort and convenience.
We are fully insured and locally regulated by the Care Quality Commission* (CQC), Health Inspector Wales (HIW), and local Councils. We are also working on our ISO* 9001, 14001, 27001, and Cyber Essentials. So, you and your data are fully protected. For more information or partnership opportunities, don’t hesitate to contact us.
Our Expertise
HTS Group offers technology and support that facilitates round-the-clock, UK-wide access to services for corporate, insurance, or self-paying clients in the following sectors:
Healthcare assessment and management
Medical transport and repatriation (road & air)
Diagnostics (Laboratories and Radiology)
Healthcare and management training
Pharmacies
Healthcare R & D
Healthcare Logistics
Medical TourismWorking Hours :Monday - Friday, 9.30am - 5.30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Key Responsibilities
Financial Administration:
Assist with day-to-day financial operations, including processing invoices, managing accounts payable and receivable, and maintaining accurate financial records.
Support the month-end and year-end closing processes to ensure timely and accurate financial statements.
Data Entry and Record Keeping:
Input financial data into accounting software and spreadsheets, ensuring accuracy and completeness.
Maintain organised and up-to-date financial documents and records as per company policies.
Bank Reconciliation:
Assist in reconciling bank statements and ensuring discrepancies are identified and resolved in a timely manner.
Support the preparation of cash flow reports and forecasts.
Reporting:
Help prepare financial reports and summaries for management, highlighting key financial metrics and trends.
Collaborate with team members to analyse financial data, providing insights for decision-making.
Learning and Development:
Participate in training sessions to develop accounting skills and knowledge of financial regulations and software.
Work towards achieving the qualifications and competencies required for the apprenticeship completion.
Training:Qualifications and Skills
Education: Minimum of 5 GCSEs (or equivalent) including English and Mathematics. A good understanding of basic accounting principles is preferred.
Communication Skills: Strong verbal and written communication abilities to interact effectively with team members and stakeholders.
Analytical Skills: Excellent attention to detail and the ability to analyse financial data accurately.
IT Proficiency: Familiarity with Microsoft Office (especially Excel) and willingness to learn accounting software.Training Outcome:A successful candidate can be offered a permanent position as an accountant in the organisation.Employer Description:Health Tech Services Group (HTSG) Limited is a leading innovator in the healthcare industry. It leverages cutting-edge technologies such as facial recognition, artificial intelligence (AI), and machine learning (ML) to provide comprehensive solutions for safeguarding vulnerable adults and delivering doorstep healthcare services. In addition to its core services, HTSG offers in-house Continuing Professional Development (CPD) training courses to upskill its team members and support the broader care industry and corporate sectors in building knowledgeable and proficient teams.
HTSG Core Services:
ab-1-4
Care Safe Mobility: HTSG works with 24-hour non-emergency patient transport and ambulance services and offers bed-to-bed transportation services for hospitals, clinics, and laboratories, ensuring these services are readily and easily accessible. Under the process of registering. Care Safe Mobility was earlier registered with the CQC (https://www.cqc.org.uk/location/1-9966471035)
ab-cah-1-5
Clinic At Home: HTSG provides doorstep healthcare services, including home visits by qualified healthcare professionals for medical assessments, treatment and ongoing care management. Through remote patient monitoring devices and telehealth platforms, HTSG enables continuous patient health status monitoring, facilitating early intervention and personalized care by implementing digital safeguarding measures for vulnerable adults using facial recognition technology and AI-powered algorithms.
ab-watch-1-4
WatchRx: HTSG offers remote patient monitoring services to vulnerable adults designed to improve patient outcomes, enhance quality of life and promote independence. Our services include a Medicine reminder system, Fall prevention technology, Geo-fencing capabilities and Automated vitals collection. The benefits of our remote patient monitoring services include improved health outcomes, enhanced safety and independence, cost-effective healthcare and personalized care management. We are committed to leveraging technology to empower vulnerable adults and support their healthcare needs. By monitoring and analyzing behavioural patterns in real-time, HTSG can proactively identify and mitigate potential risks, ensuring the safety and well-being of vulnerable individuals.
CPD Training Courses: HTSG offers in-house CPD training courses designed to enhance the skills and knowledge of its team members. These courses cover a wide range of topics relevant to the healthcare industry, including best practices in patient care, regulatory compliance, and the latest advancements in healthcare technology. Additionally, HTSG extends its training programs to external stakeholders in the care industry and corporate sectors, aiming to foster a skilled and competent workforce.
Air Ambulance (AmbuFly): HTSG includes Global Medical Tourism Services so you can get the best of World-Class treatment from your comfort and convenience.
We are fully insured and locally regulated by the Care Quality Commission* (CQC), Health Inspector Wales (HIW), and local Councils. We are also working on our ISO* 9001, 14001, 27001, and Cyber Essentials. So, you and your data are fully protected. For more information or partnership opportunities, don’t hesitate to contact us.
Our Expertise
HTS Group offers technology and support that facilitates round-the-clock, UK-wide access to services for corporate, insurance, or self-paying clients in the following sectors:
Healthcare assessment and management
Medical transport and repatriation (road & air)
Diagnostics (Laboratories and Radiology)
Healthcare and management training
Pharmacies
Healthcare R & D
Healthcare Logistics
Medical TourismWorking Hours :Monday to Friday, from 9.30am to 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
