The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route c....Read more...
This occupation is found in both the new build and refurbishment construction sector. There is growing demand for carpenters and joiners to help meet the need for the transition to modern methods of construction and sustainability.
A Site Carpenter will prepare and install basic building components e.g. doors, straight staircases, wall and floor units and erecting structural carpentry and roof structures on a building site or in domestic and commercial premises.
The broad purpose of the role is working with wood-based materials and associated products to create and install building components.
The role typically involves:
Shaping and cutting materials
Installing finished materials like partitions, doors, staircases, window frames, mouldings, timber floor coverings
Erecting structural components such as floor joists and roofs
All work needs to be carried out safely, using the appropriate tools and to the quality specified
Training Outcome:Potential for ongoing employment upon completion of the apprenticeship.Employer Description:We are a local Building and Joinery business, some of our projects include prestigious family homes with swimming pools and tennis course.
We offer the full range of building and joinery services.
More information on our projects can be found on our Facebook page.Working Hours :Monday to Friday, 7.30am to 4.00pm, with 1 hour lunch break (unpaid).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience,Physical fitness....Read more...
Job Description:
We are currently seeking a motivated and hands-on individual to join our team as a Trainee Fabricator/Welder. This is an exciting opportunity to learn a highly skilled trade within a supportive and experienced team.
Key Responsibilities:
Learn to read and interpret engineering drawings and specifications
Fabricate steel and aluminium components using a variety of hand and power tools
Develop skills in MIG welding of mild steel and aluminium
Operate relevant metalwork machinery under supervision
Maintain a safe and organised working environment
Follow all company and industry safety protocols
What We’re Looking For:
A keen interest in fabrication, welding, and engineering
Good attention to detail and a willingness to learn
Basic understanding of workshop safety (training provided)
Reliable, punctual, and a strong team player
What We Offer:
Full training and mentorship from experienced fabricators and welders
Hands-on experience with industry-standard tools and equipment
Opportunities for career progression and skills development
A friendly and supportive working environment
This role is ideal for someone looking to begin or develop a career in fabrication and welding. Whether you're a recent school leaver or looking to change career paths, we welcome your application.
Training:The successful candidate will train in the workplace 4 days a week, and in college 1 day a week. You will also have a workplace visit once a month from a college tutor. You will complete a BTEC Extended Diploma in Advanced Manufacturing Engineering within this apprenticeship.Training Outcome:Upon successful completion of the apprenticeship there is an opportunity for permanent employment.Employer Description:D&S Services was formed in 2004. We have benefited from year on year growth based on our reputation for quality, flexibility, speed of response, reliability and price competitiveness within our markets.
Our main services are stillages, predominantly for the automotive industry, structural and secondary steelwork and general fabrications in mild steel, aluminium and stainless steel.
Over the years we have built a solid reputation within the automotive industry for producing high quality stillages. We design all our stillage solutions in-house and manufacture everything within our Peterlee site. With our production engineering background we have an in depth understanding of functional, manufacturing, quality and health and safety requirements. We are a one stop solution for all your returnable packaging requirements.
We provide a wide range of structural and secondary solutions for small to medium sized complex structural steel and façade projects. Fully CE accredited to execution class 2.
General fabrications has been the back bone of the company since it was established. We can manufacture just about anything and a large number of customers come to us for their industrial fabrication requirements.
We are based in the North East of England but service customers nationally and internationally.Working Hours :Monday - Thursday, 7.45am - 4.45pm.
Friday, 7.45am - 1.45pm.Skills: Attention to detail,Problem solving skills,Analytical skills,Logical,Team working,Initiative....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
4-6 Workshop Welder Fabricators needed in West London for a Structural Steel & Architectural Metalwork company to start ASAP. They are open 12 hours a day so you can work 8-12 hours each day, half an hour taken off for break. Rate: £20.00 an hour CIS Weekends available to work also. This is long term work, temp to perm for the right peoplePlease contact Josh 07799803257 on WhatsApp if you are available for a new role
Design Engineer
Glasgow
£50,000 - £70,000 + Training + Qualifications + Chartership + Great Environment + Great package + Immediate start
Unmissable opportunity for a motivated Design Engineer to join this rapidly growing company who is offering training to further develop your skill set, support of further qualifications and natural progression up the ladder if wanted. If you are looking for the opportunity to create your future and take your career to the next level this is the right company for you.
This well established manufacturer is looking for a Design Engineer to make a difference to their growing team within materials. Be part of a team where you can learn while earning a great salary that will progress over time!
This Design Engineer role will include:
* Design Engineer role (materials) * Attend site inspections and technical meetings * Developing product specs using CAD (Materials) * Training and qualifications can be gained, including chartership! The Successful Design Engineer will have:* Background as a Design Engineer or similar * Relevant degree - structural / civil / mechanical * Experience with CAD and developing specs * Experience within manfuacturing / materials ideal * Live commutable to Glasgow
Please apply to this advert or contact Georgia Daly for more information on 07458163040.
Keywords: design engineer, structural, technician, consultancy, construction, glasgow, edinburgh, paisley, falkirk
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted ....Read more...
Position: Shipwright
Job ID: 2094/24
Location: Gosport
Salary: £17.23p/hour up to 39 hours (the next additional 4 hours onwards are paid at £21.02 as OT rate, then anything on top of this will be at £25.23p/hour)
Type: Permanent
HSB Technical Ltd is a specialist recruiter supporting the Power & Propulsion, Shipbuilding, Shipping & Energy, and Aerospace sectors. We partner with a wide range of respected clients across the UK and internationally, supplying skilled talent for both permanent and contract roles.
We are recruiting for an experienced Shipwright to join a highly regarded business based in Gosport. This permanent role focuses on the maintenance, refit, and structural work of Army vessels, Police boats, and commercial workboats—critical assets that demand robust and precise craftsmanship.
As a Shipwright, you will carry out a variety of skilled carpentry and composite repair tasks on both the internal and external structures of military and commercial vessels. This role involves high standards of finish and reliability due to the demanding environments in which these vessels operate.
Key Responsibilities for the shipwright:
•Carry out internal and external repairs and refurbished on Police boats, Army vessels, and workboats
•Paint mixing and matching for marine-grade finishes
•Skilled carpentry, including repair and replacement of wooden and composite structures
•Laminating and general GRP (glass-reinforced plastic) repair
•Replacement and installation of skimming fittings and marine fixtures
•Interpreting and working from detailed technical and structural drawings
•Maintaining quality standards required for government and commercial marine operations
Candidate Requirements for the Shipwright:
•Previous experience working on defence or emergency services vessels (Army, MOD, Police) or commercial workboats
•Skilled in laminating, GRP repairs, and marine carpentry
•Comfortable working with high-specification materials and components
•Able to read and apply technical schematics and vessel diagrams
•Reliable, precise, and capable of working to tight operational deadlines
This vacancy is being advertised by HSB Technical Ltd, who are acting as the recruitment consultancy on behalf of our client.....Read more...
The Role: Mechanical Design Engineer
Up to £55k DOE
My Client are opening a brand new site in Warwickshire and are recruiting for a Mechanical Design Engineer to assist in the design of machinery and equipment including mechanical systems, thermofluids, hydraulics and structural components
The Company
A company that is developing game changing product applications across many industries, to significantly impact global air quality and climate change for the better, opening a brand new site in Warwickshire, this is the right time to join a fantastic team!
Key Responsibilities
- Design of machinery and equipment including mechanical systems, thermofluids, hydraulics and structural components.
- Carrying out engineering calculations, component sizing and selection & machine design
- Mechanical design of all test systems including CAD drawings, BOM, schematics and supporting documentation
- Involved directly with concept definition, system design, component selection, testing, verification, and validation of prototypes and final products.
- Implementation of various design standards and practices including adherence to ISO9001 and CE marking to achieve type certification
- Identifying, evaluating and managing manufacturing partners and suppliers both in Europe and worldwide
- Preparation of technical manuals and reports
- Technical support and guidance to other team members. Participating in design meetings and disseminating progress to team members and management
- Supporting workshop production and build/assembly of large prototypes as required
The Right Person
The successful Mechanical Design Engineer will ideally be educated to degree level in a relevant discipline, as well as possessing the following key skills:
- 5+ years relevant industrial experience in mechanical design of machines, systems, engines, heat pumps or similar
- Automotive and/or heavy engineering industry experience
- Preferably hydraulic systems design experience
- Practical / Hands-on experience
- Solidworks experience required. PDM an advantage, but not essential
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionsearch.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.....Read more...
The ideal candidate will be keen to develop a career in Quantity Surveying with a passion for continuous learning, have excellent communication skills and a pro-active attitude.
To support our Quantity Surveyor and Contracts Surveyor to manage costs and contractual relationships throughout a projects lifecycle. Working closely with clients and our operational team to ensure projects are managed efficiently, completed on time and within budget, whilst minimising risk and maximising value for our clients.
Including but not limited to:
Measurement, estimating and budgeting of Construction projects
Contract review, negotiation and management
Valuation of completed work
Production of applications and invoices
Financial reviewing of current and completed projects including final account agreements
Handling claims and disputes
Project cost reviews and feedback
Support general office functions as necessary
Training:Level 4 Construction Quantity Surveying Technician Apprenticeship Standard:
https://www.instituteforapprenticeships.org/apprenticeship-standards/st0049-v1-1
Level 4 Higher National Certificate in Quantity Surveying qualification
Functional Skills in English and Maths up to Level 2 if required
Training Outcome:Progression on to further employment opportunities for the successful candidate.Employer Description:Composite Profiles is one of the UK’s first structural metal decking contractors (an innovative product in 1992), we have evolved to be one of the most respected specialists in the industry. As experts in composite metal decking, structural roof decking, safety netting and reinforced concrete we are passionate about Building Relationships and trust through excellent customer service. We typically complete over 100 projects each year ranging from Data Centres, multistorey residential buildings, Schools, Hospitals, car parks and prisons throughout the UK. Having been awarded the Investors in People Platinum status in 2020, we are recognised as leading the way in modern management by putting people at the heart of our business strategy.Working Hours :Monday - Thursdays, 08:30 - 17:00 and Friday, 08:00 - 16:30.Skills: Attention to detail,Communication skills,Customer care skills,Initiative,IT skills,Methodical,Motivated to learn,Numeracy skills,Organisation skills,Problem solving,Self-confident,Team Player....Read more...
We are seeking a Welder Fabricator for an ongoing position in Hebburn, Tyne and Wear.
Salary: £19 per hour Start Date: ASAP Hours: 37 hours per week (Mon-Thurs 8hrs, Fri 5hrs) Overtime: x1.4 weekdays & Saturdays / x1.8 Sundays Parking: Available on-site Duties: Working with a mix of structural steel and architectural metalwork in a workshop environment. Requirements: Welding PPE required.
Interested? Please contact Josh on WhatsApp: 07799803257.
Marine Fabricator – £31.31/hr | Plymouth | 26-Week Contract
Join one of the UK’s most prestigious engineering projects at Devonport Dockyard in Plymouth. We’re looking for skilled Marine Fabricators to support major Warship and Submarine programmes, delivering critical structural repairs, modifications, and fabrication work.
This 26-week contract offers £31.31/hr (inclusive rate), with a 35-hour workweek (Mon–Fri, early finish Fridays). You’ll work from detailed engineering drawings, manufacturing and altering structures across various metals and thicknesses.If you’re time-served, hold a relevant Level 3 qualification, and have experience in marine or heavy engineering environments, we want to hear from you. Prior experience with Royal Navy ships, submarines, or commercial vessels is highly desirable but not essential.
This is a great opportunity to contribute to projects of national significance.
Candidates will need to go through SC clearance or BPSS.
....Read more...
A contractor specialising in steel fabrication is seeking a Welder Fabricator in Slough.Rate: £21 an hour Start Date: ASAP Work Arrangement: Contract Work Hours: • Monday to Thursday – 7:30am to 6:00pm • Friday – 7:30am to 4:00pm • Saturday – 7:00am to 1:00pm (10 hours paid per day)Duties • Fabricating and welding a variety of structural steel components from technical drawings • Carrying out architectural metalwork including balustrades, handrails, and supports • Working with mild steel to produce accurate, high-quality work • Assisting with the assembly and preparation of steelwork for installationRequirements • No formal tickets required • Must have own welding PPE • Free on-site parking availableInterested applicants are invited to apply by sending their most up-to-date CV.....Read more...
Welders (MIG/MAG – Structural Steel) – BirminghamWe are currently looking for MIG/MAG Welders in central Birmingham for a long term project on Steel Bridge Structures.Rate/Package
£26.50 Per Hour PAYE1.5x after 10 hours Monday-Friday1.5x first 4 hours Saturday2x after 4 hours Saturday2x Sunday£50.65 Lodge per shift worked, for those whose permanent address is more than 50 miles from site address28 days holiday each year January-December
Potential Candidates will have the below qualifications
135, 136, 121 Coding's (MIG, MAG and SAW)CSCS Accredited Card (Essential)Confined Space (Optional)
Potential Candidates will also have the below experience
Steel Bridge Structure Welding/Fabrication
For more information, Contact Ben McCrory or Click Apply NowINDUK....Read more...
Welders (MIG/MAG – Structural Steel) – BirminghamWe are currently looking for MIG/MAG Welders in central Birmingham for a long term project on Steel Bridge Structures.Rate/Package
£26.50 Per Hour PAYE1.5x after 10 hours Monday-Friday1.5x first 4 hours Saturday2x after 4 hours Saturday2x Sunday£50.65 Lodge per shift worked, for those whose permanent address is more than 50 miles from site address28 days holiday each year January-December
Potential Candidates will have the below qualifications
135, 136, 121 Coding's (MIG, MAG and SAW)CSCS Accredited Card (Essential)Confined Space (Optional)
Potential Candidates will also have the below experience
Steel Bridge Structure Welding/Fabrication
For more information, Contact Ben McCrory or Click Apply NowINDUK....Read more...
A contractor specialising in steel fabrication is seeking a Welder Fabricator for short-term work in Basildon, Essex.Rate: £22.00 an hour CIS Start Date: Wednesday, 11th June Work Arrangement: Contract Duration: 2–3 weeks Work Hours: 6am to 4pm (flexible to 7am start) – 10 hours paid per dayKey Responsibilities • MIG Welding: Perform MIG welding and fabrication of structural steel components. • Drawing Interpretation: Work from technical drawings to ensure accurate fabrication. • Quality Assurance: Ensure that all work meets quality standards and specifications. • Material Handling: Manage materials and tools effectively on-site. • Safety Compliance: Adhere to health and safety regulations at all times.Qualifications • Experience: Proven experience in MIG welding and steel fabrication. • Skills: Strong attention to detail and ability to work independently.What We Offer • Parking: Free on-site parking available.Interested applicants are invited to apply by sending their most up-to-date CV.....Read more...
Welder /Fabricator Location: Nottingham NG4 2HG
Hours: Monday to Thursday 080016:30, Friday 0800 - 1530
Interviews Happening Immediately
Paying up to £17 per hour
Overtime paid at a premium
Commutable by public transport
Are you a skilled Welder Fabricator looking for your next opportunity? Were working with a well-established and growing engineering firm in Nottingham who are looking to add to their friendly team. This role offers great rates of pay, steady day shifts.
- Working from detailed engineering drawings
- MIG welding steel up to 60mm
- Fabricating components to a high standard
- Reporting to the Fabrication Manager
- Occasionally working independently on varied jobs and materials
What We\'re Looking For
- Apprentice-trained or time-served welder/fabricator
- Strong background in welding and fabrication
- Confident reading technical drawings
- Experienced fabricating and welding structural steel
- 3+ years experience working with mid to heavy gauge mild steel
- Someone who can hit the ground running and work on their own initiative
Why Youll Love It Here
- Excellent hourly rate - up to£17.00
- Commutableby public transport
- Day shifts only
- Genuine temp-to-perm opportunity
- Great team environment and solid support from day one
Interested? Lets talk! Call Sharon Pickering on 0116 254 5411 between 8 am - 5 pm to discuss your experience and the next steps. Or click Apply Now and well be in touch to chat through your CV.
Ref: Welder / Fabricator
INDTEMP
....Read more...
This international engineering consultancy is looking to recruit an experienced in house Solicitor to join it's legal team in Newcastle Upon Tyne. This is a global, award winning business operating across civil and structural engineering, sustainability and building services.
This is a fantastic opportunity to join a well established legal team which advises across the full spectrum of internal legal matters. In particular, this role will work closely with the Legal Director to assist with the review and management of the contractual arrangements on a variety of large scale projects. You will also have the opportunity to get involved in some contentious matters and support in the supervision and mentoring of more junior team members.
The ideal applicant will bring strong commercial contracts experience, ideally in the context of construction and/or engineering projects, and is likely to have a minimum of 4 years PQE, potentially much more. The business is considering a range of levels for this appointment and has scope to recruit at a more senior level.
A full position description and details around salary etc. are available on request - please get in touch with Sophie Linley at Sacco Mann for a no obligations chat on 0113 236 6711.
All references to PQE are given as a guide only and we are of course happy to accept applications from those who fall outside of the indicated bracket but who possess the relevant skills and knowledge to be successful in the role.
....Read more...
Fabricator Welder Location: Loughborough, LE11
Hours: Monday to Thursday 07:1516:15, Friday 07:1512:15
Interviews Happening Immediately
£15.46 per hour
Unlimited overtime paid at a premium
Are you a skilled Fabricartor Welder or Fabricator looking for your next opportunity? Were working with a well-established and growing engineering firm in Loughborough who are looking to add to their friendly team. This role offers great rates of pay, steady day shifts, and unlimited overtime paid at a premium
What Youll Be Doing
- Working from detailed engineering drawings
- Fabricating and welding steel up to 15mm
- Fabricating components to a high standard
- Reporting to the Fabrication Manager
- Occasionally working independently on varied jobs and materials
What We\'re Looking For
- Apprentice-trained or time-served welder/fabricator
- Strong background in welding and fabrication
- Confident reading technical drawings
- Experience in structural fabrication
- 3+ years experience working with mid to heavy gauge mild steel
- Fitting experience is a plus, but not essential
- Someone who can hit the ground running and work on their own initiative
Why Youll Love It Here
- Excellent hourly rate - up to£15.46 p/h
- Day shifts only
- Genuine temp-to-perm opportunity
- Great team environment and solid support from day one
Interested? Lets talk! Call Sharon Pickering on 0116 254 5411 between 8 am - 5 pm to discuss your experience and the next steps. Or click Apply Now and well be in touch to chat through your CV.
Ref:Welder / Fabricator
INDTEMP
....Read more...
Learn to use Autocad software for designs
Learn to use Revit software for designs
Learn how to use Navisworks
Creating and editing models using Autocad/Revit
Using Microsoft packages
Collaborating with Architects and Structural Engineers
Supporting BIM Manager and wider BIM Team
Updating models based on feedback
Organisation and maintenance of engineering documents such as designs, models and simulations
Training:
The training will take place on a day release basis (1 day per week) at Hartlepool College
Training Outcome:
It is expected that the successful candidate will progress within CAD21, progressing into a more senior role and receive professional recognition upon completion
Employer Description:EN:Able Futures, award-winning Shared/Flexi Job apprenticeship service will support you through your apprenticeship journey and professional development. We employ our apprentices directly and are listed on the Flexi Job Apprenticeship Register. We work with hosts in Yorkshire and the North East to provide apprentices in the construction and civil engineering industry.Working Hours :Monday- Friday, 8.30am- 5.00pm (1 hour unpaid lunch break).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience,Ability to use CAD Software,Interest in Construction,Interest in Engineering....Read more...
Position: Module Integration Design Engineer
Job ID: 3423/2
Location: Segensworth, Hampshire
Rate/Salary: £65,000
Benefits:
• Private Medical
• Life Insurance
• Company Pension
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Module Integration Design Engineer
Typically, this person will work closely with a multi-disciplinary team to develop and integrate modular payloads onto advanced maritime platforms. You will play a key role in designing high-performance solutions for modular marine craft used in defence and commercial operations. This is a fantastic opportunity for someone passionate about mechanical design and modular system integration.
HSB Technical’s client is an established and highly regarded MOD specialist, recognised for delivering high-performance craft for defence and specialist maritime applications. With a growing order book and an expanding product range, they are building a dedicated module integration team to support scalable, multi-role vessel systems.
While marine design experience is highly desirable, the company is also open to applicants from other engineering sectors such as automotive or aerospace, especially where experience includes systems integration, complex assembly design, or lightweight structural work.
Duties and responsibilities of the Module Integration Design Engineer:
• Perform Space, Weight and Power (Electrical) – SWAP(E) assessments for integration of diverse payload modules
• Develop 3D CAD concepts and detailed models using Siemens NX
• Generate manufacturing and assembly drawings for both prototype and production builds
• Design components and interfaces using appropriate materials (metals and composites), ensuring system-level integration
• Produce high-quality concept renderings and visuals for customer and marketing use
• Participate in design and integration workshops with both internal stakeholders and external payload suppliers
• Collaborate with multidisciplinary teams including systems, electrical and control engineering to achieve functional solutions
Qualifications and requirements for the Module Integration Design Engineer:
Essential:
• Degree or equivalent experience in Mechanical Engineering, Product Design, or similar field
• Proficiency with 3D parametric CAD (preferably Siemens NX)
• Understanding of structural design principles and SWAP(E) analysis
• Experience designing with metallic and composite materials
• Good time management and the ability to deliver to tight deadlines
• Effective communicator and team player
Desirable:
• Background in marine design or naval/military engineering
• Familiarity with rendering tools, VR environments, or immersive model interrogation
• Experience in automotive or aerospace engineering design
• Competence with 3D printing and design for additive manufacturing
• FEA experience in composites or metals
Key Behaviours:
• Organised and able to independently manage tasks and timelines
• Clear communicator with the ability to convey technical ideas effectively
• Collaborates well in multi-disciplinary teams
• Proactive problem-solver
• High standard of attention to detail
• Maintains professional conduct and respects confidentiality
General Accountabilities and Responsibilities:
• Apply initiative and practical thinking to overcome design challenges
• Maintain fluency in engineering and design software systems
• Act with integrity and align with the organisation’s values
• Support team members and business objectives with a positive mindset
• Complete any additional duties required by senior management
• Maximise productivity through effective time management
Health & Safety Responsibilities:
• Ensure the working environment is clean, safe, and compliant with company policies
• Operate tools and equipment responsibly and ensure safety devices are in place
• Follow all Health & Safety procedures for personal and team safety
• Immediately report potential hazards to management or the QHSE team
• Maintain and use PPE correctly and report wear or damage as needed
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
A Site Manager with a background in Structural Steel and Architectural Metalwork is required on a temporary contract with the potential for permanent placement. This role will cover multiple locations including Northampton, Leicester, Birmingham, Coventry, Nottingham, and London. Rate: £280 a day Self employed Start Date: ASAP Office: Based in Leicestershire Work Arrangement: Temporary contract ( could go permanent ) Work Hours: 7:30 AM to 4:30 PM ( 1 day in the office in Leicestershire, 4 days on sites ) Key Responsibilities • Site Visits: Conduct visits to initiate steel projects and monitor progress across 6-7 sites simultaneously. • Health & Safety Audits: Carry out health and safety and quality audits to ensure compliance with industry standards. • Timesheet Management: Check and verify timesheets for accuracy from site teams. • Site Surveys: Perform site surveys for minor steel works as needed. • Van & Tool Audits: Conduct audits of company vans and tools to ensure proper maintenance and usage. Qualifications • Certifications: SMSTS and NVQ Level 6 required. • Experience: Proven experience in site management within the steel construction industry. • Skills: Strong organizational and communication skills. • Flexibility: Ability to travel to various sites as needed; travel allowance available if company transport is not provided. Interested applicants are invited to apply by sending their most up-to-date CV.....Read more...
This international engineering consultancy is looking to recruit an NQ in house Solicitor to join it's legal team in Newcastle Upon Tyne. This is a global, award winning business operating across civil and structural engineering, sustainability and building services.
This is a fantastic opportunity to join a well established legal team which advises across the full spectrum of internal legal matters. In particular, this role will work closely with the Legal Director and experienced Solicitors to assist with the review and management of the contractual arrangements on a variety of large scale projects. You will also have the opportunity to get involved in some contentious matters and support in the supervision and mentoring of more junior team members.
The ideal applicant will bring some experience with construction law, most likely through a training seat, as a Paralegal or post qualification. This is likely to suit an NQ but the team could also accommodate a lawyer with c. 1-2 years PQE. This is simply given as a guide and we are of course happy to chat with applications outside of this range, who can demonstrate the necessary skills and knowledge.
A full position description and details around salary etc. are available on request - please get in touch with Sophie Linley at Sacco Mann for a no obligations chat on 0113 236 6711.
All references to PQE are given as a guide only and we are of course happy to accept applications from those who fall outside of the indicated bracket but who possess the relevant skills and knowledge to be successful in the role.
....Read more...
Key Responsibilities:
Have a good level of understanding in general construction.
Responsible for being the point of contact between workers.
Coordinating tasks for the day including but not limited to creating schedules for workers.
Activities on site are in line with health and safety procedures including conducting Toolbox talk.
Ensure the project is delivered on time and on budget by setting benchmarks, agreeing budgets and monitoring progress.
Key Skills Required:
Have exceptional written and spoken English.
IT literate and can learn to use the latest cloud software products for health safety and construction management.
Be highly self-motivated.
Have exceptional attention to detail and a right first-time attitude.
Training Outcome:Permanent placement if successful with possibility building their long term career with Byoot.Employer Description:Byoot is a construction company in the UK that provides a full turnkey solution, from planning, architects, structural engineers, building control and the build, leaving clients to focus on their day jobs while we do ours. The Graduate/Apprentice Quantity Surveyor will become a key member of the team and tasked with delivering a variety of exciting projects with a contract value from £500 - £4.5m.Working Hours :Monday to Friday, shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
As part of this apprenticeship you will follow the Groundworker Level 2 apprenticeship standard which takes 18 months to complete to become a Construction Operative.
The course covers practical principles in:
Drainage
Concrete
Levelling and setting out
Block paving
Kerbing
Brickwork
Excavation support
Working at height
Confined space operations
Small tools operation
Movement of plant
Manual handling
Training:
Groundworker Level 2 Apprenticeship Standard
Training Outcome:
This Apprenticeship gives you the basics to explore further careers paths within Murphy
Employer Description:Murphy is a leading international, multi-disciplined engineering and construction company founded in 1951 that improves life by delivering world-class infrastructure. Operating in the United Kingdom, Ireland and North America, Murphy provides better engineered solutions to infrastructure sectors including transportation, water, power and natural resources. We also have a number of related businesses – Ground Engineering; Utility Connections; Murphy Plant; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. Murphy is a specialist in delivering pipelines, design, structural steel, tunnelling, fabrication, bridges and piling, and has a substantial holding of plant, equipment and facilities. Murphy employs more than 4,000 engineers, professional managers and skilled operatives around the world. Together, we work as ‘One Murphy’ by directly delivering the people, plant and expertise needed to make projects a success. There’s more to Murphy.Working Hours :Monday Friday, 8.30am - 4.30pm an may include some evening and weekend workSkills: Communication skills,Organisation skills,Problem solving skills,Team working,Physical fitness....Read more...
Answering phone calls and emails
Database Management
Production and Delivery Management
Producing templated files quotes, RAMs and warranties
Producing reports for leads and conversion rates and KPIs
Day-to-day running of the office and onsite teams
Health and Safety compliance updates and staff training
Setting up job files
Compiling checklists for all tasks within the business
Follow-up enquiries and quotes
Developing systems and training programs for each role
Ordering materials and plant for sites
Diary management for the tradesman teams and Director
Fleet Management - fuel cards-MOT-Servicing and repairs
Implementing and training the team on new systems
HR recruitment of tradespeople and screening applicants
Marketing calls to potential engineers, architects and clients
Training:The Level 3 Business Administrator Apprenticeship with HoW College includes support from a Learning Skills Development Officer (LSDO) in the workplace and mandatory monthly day release to Worcester Campus. Training Outcome:On successful completion of the apprenticeship, the apprentice will have the opportunity to further develop their career within AllBritain. Employer Description:• A well-established Successful Business
• Company Founded in 2011
• Has a Growing Reputation in Structural Repairs, Insurance Building Repairs and Restoration Management
• Reputation Built on Confidence and Trust Within the Construction IndustryWorking Hours :Monday to Friday, 08:00 - 16:30, with half hour lunch break.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
