An exciting opportunity has arisen for a Lead Product Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Lead Product Engineer role, based in Great Yarmouth, Norfolk, will be to lead microelectronic product portfolios for both New Product Introduction (NPI) and Legacy product lines. They will be working with customers on product requirements, manage change requests and documentation and component obsolescence.
Some of the key experiences and competencies for the Lead Product Engineer, based in Great Yarmouth, Norfolk will be to work to aerospace / defence standards ideally within a microelectronic product line. Packaging experience with customer designs will be beneficial along with an understanding of mechanical CAD design principles.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Lead Product Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1299. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
Assist senior engineer with plumbing and heating installations
Clean pipe and fittings
Cut pipework to assist engineer
Hang radiators
Hang bracketery
Insight to Air Source Heat Pumps
Assist with installing boilers (Oil and Gas)
Training:Plumbing and Domestic Heating Technician Level 3 Apprenticeship Standard:
On site practical training alongside Senior Engineer. 1 day a week at College
Assessor visits to workplace
Coursework and skill portfolio submitted via online learning platform
Training Outcome:
To become an independent and valuable Engineer to Shires Building Services
Employer Description:Shires Building Services Ltd is a family run mechanical plumbing and heating company located in Westbury, Wiltshire.
Shires was established in 1994 and is committed to designing the most economical plumbing and heating systems for your home or property. We offer a comprehensive service right from the offset with a full in-depth technical design right through to the completed installation.Working Hours :On Site hours 8.00am - 4.30pm. 30minute unpaid break. Travel time included in pay .Skills: Customer care skills,Problem solving skills,Punctual,Efficient....Read more...
An exciting opportunity has arisen for a System Engineer to join a cutting-edge team developing advanced Cyber and Information Assurance (IA) products. This role offers the chance to work across multiple development projects, applying innovative engineering solutions to complex, real-world problems.
What Youll Do
- Take technical ownership of system engineering activities across one or more IA product developments.
- Collaborate closely with hardware, software, FPGA and mechanical teams to define and deliver coherent technical solutions.
- Engage in requirements engineering, capturing, analysing and refining requirements across all design disciplines.
- Contribute throughout the full product lifecycle, from initial concept and architecture through to development, verification, and customer delivery.
- Support bid proposals and provide technical input to customer discussions to ensure solutions meet end-user needs.
What Were Looking For
- Degree in a relevant engineering discipline and 5+ years industry experience in systems engineering or a related field.
- Strong understanding of the systems engineering lifecycle, including requirements management, architecture, and product validation/verification.
- Broad technical awareness across multiple engineering disciplines, with expertise in at least one area.
- Ability to produce clear, concise technical documentation and communicate effectively with cross-functional teams.
- Experience using DOORS or similar tools for requirements management is an advantage.
- Must hold sole British nationality and be eligible for UK Security Clearance (SC).
Desirable Skills
- Knowledge of system design languages (UML, SysML) and techniques such as use-case analysis or trade studies.
- Experience preparing technical estimates for bids.
- Familiarity with mechanical and environmental qualification processes.
This is a fantastic opportunity for an experienced System Engineer, or an electronics/software engineer looking to broaden their scope, to play a key role in the design of unique, high-assurance products used in critical national security applications. Youll work with an innovative team tackling challenging technical problems and shaping solutions from concept to delivery.
RW....Read more...
Perimeter Automation are specialists in gate automation and access control solutions, we are currently one of the UKs fastest growing physical security specialists. We operate on building sites, industrial units, schools as well as Mod & MOJ sites. We're expanding our team and are looking for an experienced Gate Automation Engineer to join us, working on high-quality installations across the South East.The RoleAs a Gate Automation Engineer, you'll be responsible for:
Installing, servicing, and maintaining automated gates and access control systemsFault-finding and carrying out repairs to automation equipmentDelivering work to the highest standards of safety and complianceLiaising with customers on-site to provide excellent serviceWork predominately based around the South East, with occasional stay away required.
RequirementsWe're looking for someone with:
Proven experience installing gates, automation systems, and access controlAn ECS card (essential)DHF and GateSafe training (preferred, but not essential)Strong electrical/mechanical skillsA full UK driving licenceA proactive approach with good problem-solving skills
What We Offer
Salary of £40,000 - £50,000 depending on experienceCompany vehicle, tools, and uniform providedOngoing training and development opportunitiesA supportive, professional team environment
If you're a skilled gate automation engineer looking for a new opportunity with a growing company, we'd love to hear from you.....Read more...
2nd Line Support Engineer – Milton Keynes5 Days per week onsite - £35,000 - £38,000 per annum2nd Line Support Engineer required for a leading client based in Milton Keynes. My client is currently seeking a 2nd Line Support Engineer to come on board to provide support for Microsoft environments across a diverse clientele spanning various industries such as legal, real estate, logistics, manufacturing, and more. Responsibilities include managing installations, upkeep, and resolving issues pertaining to Windows 10/11 operating systems on both laptops and desktops.Key skills:
Strong 2nd Line support experience
Conduct administration tasks for server operating systems.
Collaborate with RDS, Citrix, and Hyper-V technologies.
Supply assistance for smartphones (Android & iOS), tablets (Android & iOS), printers, scanners, copiers, and other hardware devices.
Oversee Office 365 administration, including user account management, Azure AD, Exchange, etc.
Manage various Microsoft products such as Office, Teams, SharePoint, OneDrive, and MFA.
Administer backup technologies and antivirus/security software.
Execute cable patching and utilize remote access tools.
Leverage ITSM tools for streamlined service delivery.
Demonstrate proficient technical abilities, demonstrating competence in managing the aforementioned tasks.
Possess outstanding customer service and communication aptitudes.
Display a fervent dedication to their profession and a commitment to delivering superior client-centric service.
Interested? Please submit your updated CV to Emma Siwicki at Crimson for immediate consideration.
Not interested? Do you know someone who might be a perfect fit for this role? Refer a friend and earn £250 worth of vouchers!
Crimson is acting as an employment agency regarding this vacancy....Read more...
As a Rail & Rail Systems Engineering Degree Apprentice in our Rail Engineering Services team in Birmingham, you will assist in supporting engineers in the production of designs for railway enhancements. The safe and reliable running of the railways is due to the support of a wide range of civil infrastructure, including signalling, overhead lines and telecoms. Where practical, you’ll get the opportunity to carry out site inspections and see the projects come to life.Training:
You will attend University to study a Rail & Rail Systems Engineering Degree Apprenticeship and gain a BEng, and the opportunity to gain your Incorporated Engineer status with your chosen professional institution
You will be enroled onto a bespoke internal development programme to help you to attain the knowledge, skills and behaviours to successfully achieve your apprenticeship, and support your career in Rail & Rail Systems Engineering
You will have the support of your team, line manager, mentor and buddy as well as a dedicated early careers team
Training Outcome:
You will gain a Rail & Rail Systems Engineering degree apprenticeship with a bachelors' qualification. as well as completing your End Point Assessment (and your Incorporated Engineer status)
As this is a permanent position, after gaining your degree, WSP will continue to be committed to your learning and development throughout your career with us
You will have the opportunity to continue professional development and work towards gaining Chartered status or equivalent with your chosen institution, as well as the opportunity to pursue your further study and training goals
Employer Description:As one of the world’s leading engineering consultancy firms, at WSP we’re passionate about the big questions, and big answers, naturally. For us that’s all about reaching beyond the expected to do work that’ll make a profound impact felt long into the future. We engineer projects that will help societies grow for lifetimes to come. We’ve been involved in many high-profile projects like The Shard, Crossrail, M1 Smart Motorway and the London Olympic & Paralympic Route Network.Working Hours :Monday- Friday, 37.5 hours per week. Exact working hours to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working....Read more...
Mobile Commercial Gas Engineer - North West - National Facilities Management Organisation: Commercial & Public SectorCBW Staffing Solutions have a fantastic opportunity for a Commercial Gas Engineer to join a leading facilities management organisation, on a permanent basis. You’ll carry out servicing, fault-finding, repairs and minor installations on a range of commercial heating systems across sites such as schools, offices, care homes, retail outlets and public buildings. You will be working both independently and occasionally as part of a small team, covering a patch within Manchester & the North West region. Package:Competitive salary between £48,000 - £50,000 per annum (depending on experience)Van & fuel card supplied (personal use is permitted)FULL travel time paidCore hours are Monday - Friday (40 hours per week)Overtime rate Mon - Fri 1.50x Standard Rate & Sat - Sun 2.00x Standard RateParticipation in an ‘out of hours’ on call rota (to be confirmed)22 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunities Responsibilities:Servicing and maintenance of a variety of commercial gas appliances and systems, including boilers, heaters, and pipeworkPerform routine inspections and safety checks to ensure gas systems are operating efficiently and in compliance with industry standardsDiagnose and repair mechanical and electrical faults in gas appliances, ensuring minimal downtime and maximum safetyConduct gas leak tests and carbon monoxide checks to identify and mitigate potential hazardsCollaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgradesAdhere to safety protocols and regulatory requirements to promote a safe working environment Qualifications:Proven experience as a Commercial Gas Engineer or similar role within the facilities management industryGas Safe Register certification and relevant qualifications (e.g. ACS, COCN1, CODNCO1)Full UK driving licenceStrong knowledge of commercial gas appliances, systems, and regulationsProficiency in diagnosing and troubleshooting mechanical and electrical faultsExcellent problem-solving skills and attention to detailAbility to work independently and as part of a teamEffective communication and customer service skills Interested? Apply with a full & up to date CV or call Aaron Rutter at CBW Staffing Solutions.....Read more...
Redline are looking for a Mansfield based Quality Engineer to help drive excellence across their inspection processes and ensure total compliance with industry, customer, and internal standards.
As a Quality Engineer, you'll play a pivotal role in auditing the inspection operations, verifying that Automated Test Equipment (ATE) programmes meet specifications, and supporting a culture of continuous improvement. You will work closely with inspection teams, engineers, and management to maintain quality and compliance in everything our client does.
Key responsibilities of the Quality Engineer job, based in Mansfield:
Audit inspection activities to ensure compliance with internal procedures and industry standards
Monitor ATE test programme integrity and validate parameters against approved specs
Conduct internal audits across departments and product lines
Document audit findings and support root cause analysis and CAPA initiatives
Collaborate with production and engineering teams to promote best practices and process improvements
Support external audits and provide compliance documentation
What we are looking for in the Quality Engineer job based in Mansfield:
A detail-oriented, analytical thinker with strong documentation skills
Experience in quality assurance, inspection, or compliance auditing in manufacturing
Confidence interpreting technical drawings and test specifications
Knowledge of ATE systems and test program logic
Excellent communication skills and a team-oriented mindset
If this Mansfield based Quality Engineer job could be of interest to yourself, send your CV to Nking@redlinegroup.Com or call 01582 878839/ 07961158788.....Read more...
An opportunity has arisen for an Internal Sales Support Engineer / ISE, who will provide Technical Sales Support for my client who are a leading manufacturer of Process Control, Process Automation and Process Instrumentation based at their headquarters which are located on the Isle of Wight. Our client produces a comprehensive DCS, Distributed Control Systems suite of PLC, HMI, Drives, Automation, Control and Instrumentation.
This is a fantastic opportunity for an experienced Internal Sales Engineer who will provide technical sales support for clients and their colleague sales co-ordinators. You will liaise with the Sales Support Manager and Sales Director and suggest any changes or improvements which may enhance efficiency or save costs. The Internal Sales Engineer will check all customer enquiries with due regard to pricing and delivery requirements and all customer requests are dealt with speedily and efficiently. The role also entails the ISE to be able to articulate with all written correspondence and you will be expected to maintain a database of all quotations in order to enable speedy access of information.
For the Isle of Wight based role of Internal Sales Engineer you will have previous experience in working in a technical / sales role. You will need to be a confident and assertive communicator with a strong customer focus and the ability to work under your own initiative. You will hold an engineering or process related qualification as this will be essential for this position.
For further information on the Internal Sales Engineer job based on the Isle of Wight please contact Ricky Wilcocks on 01582 87 8810 or 079317 888 34.....Read more...
Mechanical Maintenance Engineer - Client Direct - Days - Heritage Site - Kew - Up to £45,750 Exciting opportunity to work In House / Client Direct Company in Richmond . My client is looking for a Mechanical Maintenance Engineer to be based in an iconic & beautiful heritage site in the Borough of Richmond. The successful candidates will be mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance. Working with the maintenance team on site, he or she will have experience carrying out mechanical, plumbing, HVAC & fabric duties. In return the company are offering a competitive salary up to £45,750, further training and career progression. DutiesManage and carry out planned and reactive maintenance to mechanical & electrical plant and equipmentHeating systems and controlsVentilation systems and controlsAir-conditioning systems and controlsComfort cooling systemsRefrigeration systemsEnvironmental computer-controlled systems (BMS)Water softening plantLTHW plantRO plantAir heatersPumping systemsHours of workMonday to Friday - Week 1 08:00 - 16:00, Week 2 09:00 - 17:00. Week 3 10:00 - 18:00 1 in 3 weekend cover (2 days off in the week that week)36 hour weekPackageUp to £45,75130 days + bank holidays 8% non contributory pension, 10% if the employer puts up 2%Season ticket loanTraining & progressionFlexible benefits portalCycle to work schemeEye care schemeFree access to similar heritage sites RequirementsMechanically qualified Level 2 / 3 / HNC / HNDYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceExcellent customer skills If you are interested please get in contact with Fin Havering of CBW Staffing solutions....Read more...
Mechanical Maintenance Engineer - Edinburgh - Salary up to £40,000 DOE CBW is seeking an experienced Mechanical Engineer to join a leading facilities management team on a large static site in Edinburgh. You will be involved with the maintenance and minor works service covering a wide and varied range of mechanical equipment servicing large industrial units such as dual fired boilers and heating and ventilation distribution equipment. Key Responsibilities:Undertake fault finding on complex medical gas systems, MTHW /LTHW pressure heating water systems, critical systems and equipment and pressurised steam systems.Using cause effect analysis and detailed examination to gain a solution and use of all relevant drawings and schematics.Carry out planned preventative maintenance, inspections, commissioning and testing in accordance with published procedures, completing all report sheets and test certificates as necessary and mark up any drawing alterationsUse of all relevant tools and equipment within safety guidelines as necessary for the completion of works.Work involves the use of analytical test devices, specialist tools, workshop fixed equipment, portable electrical equipment, welding equipment, emergency generators, medical gas equipment, suction units, geared drives.Requirements:Required qualifications are an appropriately recognised Mechanical/Engineering apprenticeship.C&G, Scotvec (SVQ3), or equivalent.This role includes a DS Basic check therefore ability to pass is essential.Salary & Benefits:Up to £40,000 DOE.24 days annual leave plus public holidays.Life cover equivalent to 1.5x annual salary.Employee discount schemes with major retailers.Gym membership discounts.Holiday purchase scheme.Ongoing training and career development, including professional qualifications and tailored support programs.....Read more...
Mechanical / Plumbing Maintenance Engineer - East India Docks - £45,000 - Monday - Friday East India Docks £45,000 per yearMonday to Friday, 8:00 AM – 5:00 PM25 days annual leave + bank holidays About the Role We’re looking for a reliable and skilled Mechanical / Plumbing Maintenance Engineer to join our commercial building services team. You’ll be responsible for both planned preventative maintenance (PPM) and reactive maintenance across mechanical and plumbing systems within commercial office environments. Key ResponsibilitiesCarry out planned and reactive maintenance on mechanical and plumbing systemsDiagnose and repair faults across HVAC, pumps, valves, and general mechanical plantMaintain hot and cold water systems, sanitary ware, and drainageSupport other engineers and contractors on-site as neededComplete all maintenance records, reports, and compliance documentation accuratelyEnsure all work meets health and safety standards and company proceduresRequirementsNVQ Level 2 or 3 in Plumbing/Mechanical Engineering (or equivalent)Experience in commercial building maintenance (offices, retail, or similar)Strong understanding of mechanical and plumbing systemsGood communication and teamwork skillsAbility to manage workloads and respond quickly to reactive tasksWhat We Offer£45,000 annual salary25 days holiday + bank holidaysMonday–Friday, 8–5 schedule (no nights)Ongoing training and career development opportunitiesSupportive and professional working environment....Read more...
An exciting opportunity has arisen for a Civil Engineer (Highway / Drainage) to join a well-regarded consultancy known for delivering innovative and sustainable transport planning solutions.
As a Civil Engineer, you will be responsible for developing and delivering drainage and highway designs for new development projects. This role offers a competitive salary and benefits.
They will consider all level of candidates.
You will be responsible for:
* Design technical solutions for highway and drainage systems to support S104, S38, and S278 applications.
* Perform a range of technical assessments for new developments.
* Provide guidance and technical explanations to junior staff and clients.
* Review technical documents, reports, and drawings produced by junior team members.
* Present technical information to internal and external stakeholders.
* Manage projects to ensure high-quality delivery on time and to specification.
* Regularly update progress and collaborate with Project Managers to coordinate tasks.
* Ensure compliance with industry standards and regulations in all project phases.
* Stay up to date with the latest industry trends, best practices, and innovations in civil engineering.
What we are looking for:
* Previously worked as a Civil Engineer, Highway Engineer, Drainage Engineer, Civil Design Engineer, Highway Design Engineer, Drainage Design Engineer, Civil Infrastructure Engineer, Highway and Drainage Engineer or in a similar role.
* Possess 2 years' experience working in UK development-related infrastructure engineering.
* Experience in preparing highways or drainage designs, particularly S38, S278, and S104 processes.
* Background in writing flood risk assessments or drainage strategies.
* Proficient in drainage design principles and skilled in using Microdrainage and/or Causeway Flow software.
* Degree or equivalent qualification in Civil Engineering or a related field.
* Understanding of relevant UK design standards, including DMRB, Manual for Streets, Sewers for Adoption, and national planning policies
* Skilled in in AutoCAD and Civils 3D.
* Full UK driving licence.
* Right to work in the UK.
Whats on offer:
* Competitive salary
* 25 Days annual leave
* Casual dress
* Company pension
* Life insurance
* Paid volunteer time
* Sick pay
* Cycle to Work Scheme
* Employee mentoring programme
Apply now for this exceptional Senior Drainage Engineer opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
Senior Systems Engineer – Cutting-Edge Medical Technologies – Oxford
We are currently looking for a Senior Systems Engineer to join a pioneering medical technology company based in Oxford. This is a unique opportunity to contribute to the development of advanced implantable therapeutic systems that are set to transform patient care. As part of a growing R&D team, you’ll take ownership of system architecture, documentation, and compliance across complex platforms, helping to drive innovation from concept through to clinical application.
This is a hands-on, multidisciplinary role where you’ll be involved in defining design inputs, managing system-level requirements, and supporting verification and clinical activities. You’ll work closely with software, hardware, and quality teams to ensure seamless integration and alignment with international standards. The position is focused on implantable therapeutic technologies, with scope to support other innovative programmes as needed.
You’ll be responsible for maintaining traceability across design and risk documentation, leading technical investigations, and supporting regulatory submissions. Your expertise in systems engineering and risk analysis will help drive safe, effective solutions in a fast-paced, regulated environment. The team values proactive problem-solvers who thrive in collaborative settings and bring clarity to complex technical challenges.
This opportunity is ideal for someone with a background in medical device development, particularly within implantable or regulated systems. Familiarity with ISO 14971, ISO 13485, and verification methodologies will be key, alongside strong communication skills and a detail-oriented mindset.
If you’re looking to make a meaningful impact in a high-accountability setting—where innovation meets clinical application—this could be the next step in your career.
To learn more, contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your CV and a member of our team will be in touch.....Read more...
We are seeking a Senior Production Engineer to join a market leading chemical manufacturing company, located in West Yorkshire. It’s a days based role, Monday to Friday with a salary paying anywhere between £50,000 – £55,000 (doe). This is complemented by a high benefits package which includes enhanced company pension contribution, discretionary bonus, 25 days holidays plus bank holidays and life assurance.
Taking this opportunity as the Senior Production Engineer you are working with a world leader in green chemistry. You are empowered to realize your full potential, drive innovation, and make a meaningful impact to help be successful as the Senior Production Engineer. With a growth mindset at their core, they continuously strive to create greater value for our customers and communities.
Roles and Responsibilities for the Senior Production Engineer
Apply a culture of continuous improvement that safely enhances operational efficiency by defining, implementing, and delivering sustainable capacity gains, cost reductions, and quality improvements.
You will identify and resolve root cause issues related to safety, downtime, reliability, and overall operational performance, implementing sustainable solutions through the Management of Change process.
You will lead or contribute to incident investigations and develop recommendations to prevent future occurrences.
Desirable qualifications and experience for the Senior Production Engineer
A degree within a relevant discipline (Chemistry, Chemical Eng, Eng); or equivalent industrial experience.
A strong commitment to personal growth with the ambition to advance within the company or assume greater responsibilities.
Having the ability to build strong relationships by having excellent communication and interactive skills.
Experience with Lean/Six Sigma and process control systems.
We are in search of a Senior Production Engineer with an established background on a COMAH site within chemical or pharmaceutical manufacturing environments. We would consider candidates with other relevant experience within a manufacturing environment.
Please apply direction for Senior Production Engineer position....Read more...
Field Service Engineer
Gloucester
£36,000 - £38,000 Basic + Training + Progression + Supportive Team Environment + Premium Quality Products + Job Security + Immediate Start
Join a leading name in the water treatment industry as their next Field Service Engineer and build a long-term career with real progression opportunities. Be part of a company that truly values its engineers - offering training and a supportive, family-feel environment.
This well-established organisation boasts a prestigious portfolio of clients, known for delivering exceptional quality and service. You’ll be working across a wide range of projects, enhancing your skills and advancing your career in a company that puts its people first.
Your role as a Field Service Engineer will include:
* Installation and commissioning of water purification systems * Servicing and maintaining equipment at existing customer sites * Adhering to high health and safety standards * Liaising professionally with clients and handling technical queries
The Successful Field Service Engineer will include:
* Background as a Field Service Engineer or similar * Experience with Water Purification * Relevant qualification * Happy to travel across the South West region
For immediate consideration, please apply now or contact Georgia Daly on 07458163040
Key Words: Water Treatment Engineer, Field Service Engineer, Reverse Osmosis, Deionisers, Water Softeners, Mechanical, Electrical, Cheltenham, Cardiff, Birmingham, Gloucester, Exeter, Bath
This role is being advertised by Future Engineering Recruitment Ltd. We operate as an employment agency. For more opportunities, please visit our website. Applicants must have the legal right to work in the UK. Unfortunately, we are unable to process applications from individuals without this status.....Read more...
Mechanical Design Engineer - Solidworks Are you a Mechanical Design Engineer with SolidWorks experience seeking a new role in Milton Keynes, Buckinghamshire?
My client is looking for a motivated and enthusiastic Mechanical Design Engineer to support ongoing and future projects. Their products and systems are widely used in the retail environment and are now expanding into new industries, including applications across major airports.
The ideal candidate will have 1–3 years’ commercial experience and a solid understanding of mechanical design principles. This role will involve 3D CAD design, detailed drawings, and supporting projects from concept through to manufacture, so strong SolidWorks skills are essential.
Responsibilities of this Mechanical Design Engineer job based in Buckinghamshire:
Create 3D CAD models and detailed engineering drawings using SolidWorks.
Support the development of products from concept design through to production release.
Liaise with manufacturing and suppliers to ensure designs are practical and cost-effective.
Assist with prototype builds, testing, and design validation activities.
Participate in design reviews and contribute to continuous product improvements.
Skills & Experience Required for this Mechanical Design Engineer job based in Buckinghamshire:
1–3 years’ mechanical design experience in industry.
Proficiency with SolidWorks (3D modelling, assemblies, detailed drawings).
Knowledge of materials, manufacturing methods, and design for manufacture/assembly (DFM/DFA).
Ability to produce and check engineering drawings to industry standards.
This is a fantastic opportunity to join a forward-thinking company that values innovation and offers great scope for career development.
If you have any specific questions about this Mechanical Design Engineer vacancy based in Milton Keynes, Buckinghamshire, please call Nick Drain on 01582 878828 / 07961 158786.....Read more...
Sales Engineer required for a prestigious Engineering and Manufacturing business, offering in excess of 35 years experience, renowned for quality deliverables and services for a wide range of industries including Pharmaceutical, Energy and Food.This opportunity is based in BRADFORD, meaning that the successful Sales Engineer will be easily able to commute from surrounding towns and cities including; Leeds, Huddersfield, Dewsbury, Halifax, Wakefield, Keighley and Bingley.Key Responsibilities of the Sales Engineer will include;
Attend site and client visits to qualify new opportunities and scope of works
Work collaboratively with clients to develop solutions within the companies portfolio of services or products
Generate detailed technical quotations in a timely manner
Convert quotations into confirmed orders
Work to sales targets and provide accurate forecasts
Attend exhibitions and sales events to keep abreast of industry trends and technologies
For the role of Sales Engineer, we are keen to receive applications from individuals who have;
Experience as a Sales Engineer within an Engineering or Manufacturing environment
Confidence presenting to various stakeholders
Proven technical sales experience
Experience using CRM systems to track opportunities
Understanding of NEC3 contracts
Salary & Benefits
£45,000 - £50,000 (OTE £62k +)
28 Days annual leave
Birthdays off
Closed over Christmas
Long service award
8% Combined pension
Mon – Thur – 7:45am – 4pm
Fri – 8am – 3pm
To apply for the Sales Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information.....Read more...
Are you a Software professional with a background in DSP and have exposure to developing 5G applications?
If so I’d like to speak with you!
A well-established R&D organisation who are also a market leader, are looking to rapidly expand their engineering team and as such are seeking an Embedded Software Engineer to join their development team near Leicestershire.
As an Embedded Software Engineer you will have a background in Digital Signal Processing and a working knowledge of communications systems engineering. To successful candidate for the Embedded Software Engineer job will have a mixture of embedded/bare metal experience alongside an understanding of implementing communication signal processing algorithms such as DDCs, filters, FFTs.
Skills/Experience required for the Embedded Software Engineer job include:
- BEng/BSc or MSc/Meng within Engineering (Ideally Electronics, Telecommunication or similar)
- Experience in DSP Algorithm simulation and 5G development
- Experience in Bare Metal/ Embedded C
- Experience with RF a bonus
Experience of the following would be advantageous:
- Cross compilers (C++ ARM cross-compiler GCC Version 4.3.3)
- FreeRTOS experience
- Experience with typical embedded control peripherals (i.E. RAM, Flash, UART, PWM, A/D, CAN, I2C and SPI)
- Cortex M3/M4 Microcontrollers or similar.
- Experience of efficient implementation of communications DSP algorithms (such as FFT, filtering DDC etc.) In VHDL
This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D. This is a great chance for a Embedded Software Engineer to join a consistently growing technology company offering great training and career progression opportunities.
To apply for the Embedded Software Engineer job please send your CV to Ricky Wilcocks, rwilcocks@redlinegroup.Com or phone 01582 87 8810 or alternatively 079317 88834.....Read more...
Position: Chief Engineer
Job ID: 488/2
Location: Norway
Rate/Salary: NOK 76,600 Per Month (6,600 euros)
Benefits: Allowance of NOK 3,000 (260 Euros), Flights covered
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy, and Subsea sectors – visit [www.hbstechnical.com] for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
Our client are seeking a skilled and motivated marine engineer to join their offshore operations. We’re looking for someone with a valid M1 certificate and relevant maritime experience—preferably from tugboat operations, though this is not essential, you’ll be part of a solid and professional team with a strong focus on safety, collaboration, and quality.
Typically, this person will work in close collaboration with the Engineering Team to deliver safe, efficient vessels to the operations team. They will be responsible for servicing, maintaining, and developing marine engineering systems onboard vessels and facilities, ensuring compliance with safety legislation and company policies.
HSB Technical’s client is an established and well-regarded business entity.
Duties and responsibilities of the Chief Engineer:
• Maintain, service, and develop vessel machinery and engineering systems in line with operational requirements and safety standards
• Oversee daily engineering operations onboard, ensuring efficient performance and reliability of all machinery
• Collaborate with the deck and technical teams to support safe vessel operations and problem-solving
• Ensure compliance with international maritime safety regulations and company policies
• Participate in scheduled maintenance, inspections, and audits to uphold operational excellence
• Mentor and guide junior engineering staff, fostering a professional and safe working environment
Qualifications:
• Valid M1 Certificate (Marine Engineer Class 1)
• Tugboat experience is advantageous, but not required
• Strong sense of responsibility, teamwork, and operational awareness
• Understanding of Norwegian or another Scandinavian language is desirable
We offer
Fixed rotation: 4 weeks on / 4 weeks off
Private cabin onboard
Inclusive and professional work environment
Opportunities for professional development
This vacancy is being advertised by HSB Technical Ltd, who have been appointed to act as a recruitment partner for this role.....Read more...
The Job
The Company:
Global Company.
Invest heavily in continuous product development & innovation.
Multimillion Pound turnover but have retained a family feel.
Benefits of the Field Service Engineer
£33k-£36k Basic
Full company training and support, enabling you to gain expert knowledge in all companies’ products and services
A great work-life balance, giving you the choice to work overtime as you wish
25 Days annual leave in addition to Bank Holidays
Company sick pay after your first 3 months
Annual bonus.
The Role of the Field Service Engineer
Our client sells a range of food delivery/meal delivery systems such as trolleys, tray systems, remote monitoring and aftercare services. This is very much a solution led projects as they deal in products from the kitchen to being delivered to the penitent.
Selling mainly into Hospitals (90% of the time) dealing with Catering Managers, procurement and will also sit in on budget meeting if required. They also do deal with Education, Care homes & some prison sites
Monday to Friday 8.5 hours per day (Overtime available if needed)
70% planned maintenance + 30% reactive
Great work life balance
Covering the West Midlands although you will need to travel outside you area on occasion to support where the work is.
The Ideal Person for the Field Service Engineer
Good electrical knowledge Including 3 phase.
In the past have taken candidates from a coffee machine, catering equipment, refrigeration, air conditioning & white good background
Organised and methodical working.
Full driving license.
Honest and trustworthy.
Good customer relationship skills.
Good stable work history.
Must always be smart and presentable.
Able to complete paperwork in neat and timely manner.
Clean DBS record.
You must have legal rights to work in the UK.
Refrigeration F-Gas registered C&G 2079 is desirable.
Role will involve walking around sites, lifting tools, and accessing equipment at low levels
If you think the role of Field Service Engineer is for you, apply now!
Consultant: David Gray
Email: davidg@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
Flexible working hours, company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Lead Quality Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables.The successful Lead Quality Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Lead Quality Engineer will include:
Manage a team of up to 5 Quality Engineers or equivalent
Maintain and govern Quality management systems such as ISO 9001:2015 via thorough internal and external auditing
Manage the Quality function including resource planning, coaching and training.
Work within a multi-functional integrated project team, representing and promoting Quality throughout all areas of the team
Engage with 3rd party accreditation bodies, customers, suppliers and end users to ensure the delivery of quality requirements inline with regulations and standards.
Ensure accurate usage of internal systems such as SAP for the timely recording of non-conformity, discrepancies
Conduct Quality investigations on non-conforming products using root cause analysis, Corrective and preventive actions and industry recognised tools
For the Lead Quality Engineer role, we are keen to receive CV’s from candidates who possess:
Experience as a Lead Quality Engineer or similar within an Engineering or manufacturing environment
Ability to read and understand detailed mechanical drawings, Geometric Dimension and Tolerancing
Open to travel UK (10%) and Overseas (10%) - Full Clean Licence
Apprentice trained or a HNC/HND in Mechanical Engineering or similar
Salary & Benefits:
up to £50,000 depending on experience
Flexible working hours
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Lead Quality Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
Are you an Embedded Software Engineer – C/C++ looking to work for a company that makes products that save lives. If so, then this is the job for you! My client’s office is based in Rochester, Kent, commutable from Gravesend, Dartford, Bexleyheath, Sittingbourne, Maidstone, Ashford, and Sevenoaks and offers flexible/hybrid working.
In this job you will design and develop application software and embedded firmware in C and C++ for future products and assist with the support and enhancement of my clients existing product portfolio.
In this Embedded Software Engineer – C/C++ job based in Rochester, Kent you will be responsible for:
- Design and develop embedded software using Embedded C
- Work with FreeRTOS to develop real-time, low-level firmware
- Interface directly with hardware, sensors, and microcontroller peripherals
- Contribute to system integration, debugging, and testing
- Collaborate with cross-functional engineering teams to deliver high-quality products
To apply for this Embedded Software Engineer – C/C++ job based in Rochester, Kent you must have a combination of the following skills:
- Proven experience as an Embedded Software Engineer
- Strong hands-on experience with Embedded C and FreeRTOS
- Solid understanding of microcontroller-based systems and real-time constraints
- Familiarity with low-level hardware interaction and debugging tools
- Experience in a safety-critical or regulated environment is a plus-
If you are interested in this Embedded Software Engineer – C/C++ job based in Rochester, Kent please call Ricky Wilcocks on 01582 878810 or 07931788834 or email RWilcocks@redlinegroup.Com to apply or discuss alternative jobs.....Read more...
An exciting job opportunity has arisen for a Senior Test Development Engineer based in Norwich, Norfolk to join the market leader involved within an exciting technology sector.
Due to continued growth, they are seeking a Senior Test Development Engineer to be involved with development and progression of multiple projects.
The Senior Test Development Engineer’s job responsibilities will include:
- Developing measurement processes for automated systems, utilising test, and measurement instruments. Predominantly working on RF solutions.
- Working with colleagues to identify the resources needed to execute the calibration plan
- Interface with Hardware and Software Engineers and the wider team to review system requirements and construct effective test strategies
- Contributing to the entire hardware/software development life cycle from initial business requirements to deployment, production, and service support
Key skills and experience for the Senior Test Engineer job based in Norwich, Norfolk:
- BSc in Electrical and Electronic Engineering or equivalent experience
- Experience in the test and measurement field utilizing T&M instrumentation including calibration techniques
- Sound understanding of measurement uncertainty analysis and testing RF products
This is a fantastic job opportunity to join a well-established, successful Norwich, Norfolk based company who are investing very heavily in R&D.
To find out more about the Senior Test Development Engineer job or other potential jobs we currently have at the moment, please contact Ricky Wilcocks on 01582 878834 or 079317 88834 or kindly email your most up to date CV and covering letter to Rwilcocks@redlinegroup.Com....Read more...
