Your Role
Serve as the first point of contact for IT issues, providing clear, confident, and friendly support
Deliver hands-on troubleshooting for **hardware, software, and network** challenges
Set up and retire laptops, peripherals, and other devices.
Manage user onboarding and offboarding to ensure seamless transitions
Keep precise records of IT equipment, user accounts, and configurations
Investigate potential cybersecurity concerns, escalating when necessary
Provide support for remote staff and off-site locations
Promote and uphold IT policies, compliance requirements, and data protection standards
What You’ll Bring:
Proven experience in first-line IT support or a similar technical role
Strong knowledge of Windows OS, Microsoft 365, and fundamental networking principles
Awareness of **cybersecurity best practices** and incident response
Excellent communication skills with a customer-first approach.
Ability to prioritise tasks and stay organised under pressure
Familiarity with IT asset management and user account administration
If you thrive on solving problems, enjoy helping people, and take pride in keeping tech running at its best, we’d love to hear from you.Training:
ICT (Information Communications Technician) Level 3 Apprenticeship Standard
You will also receive full training and support from the Just IT apprenticeship team to increase your skills
Your training will include gaining a Level 3 Information communications technician qualification
Training Outcome:
Potential full time position for the right candidate after completion of the apprenticeship
Employer Description:We specialise in Computer repairs, Laptop, MacBook/IMac repairs, Web design and hosting, Data Recovery and Data delete & bespoke CRM applications for SME. We buy or Part exchange your old computers and PC. Whether it’s a software problem or a hardware issue, we have the expertise to get your device up and running again in no time.Working Hours :Working days to be confirmed between - 9.00am - 5.30pm, 30 minutes for lunchSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility. Component, product, mechanical testing, assembly & disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or C&G level 3 in mechanical engineering is required ideally with
Mechanical fitting skills practical ability with hand and power tools.
Mobile hydraulics.
Pneumatics
Pressure systems
Pressure equipment (e.g. Accumulators/pulsation dampener)
Pressure safety equipment, e.g. Pressure Relief Valves.
Fluid Power systems ??? Pumps, Piping, Valves.
Plant maintenance activities, installation or fault finding and repairs of equipment and services.
3D CAD
....Read more...
Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility. Component, product, mechanical testing, assembly & disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or C&G level 3 in mechanical engineering is required ideally with
Mechanical fitting skills practical ability with hand and power tools.
Mobile hydraulics.
Pneumatics
Pressure systems
Pressure equipment (e.g. Accumulators/pulsation dampener)
Pressure safety equipment, e.g. Pressure Relief Valves.
Fluid Power systems ??? Pumps, Piping, Valves.
Plant maintenance activities, installation or fault finding and repairs of equipment and services.
3D CAD
....Read more...
We are expanding our team and looking for an Electron Beam Welder (EBW) Technician to support precision manufacturing in a cleanroom environment. This role involves operating and maintaining EBW machines, ensuring weld quality on metals and super alloys, and working closely with engineering teams to deliver high-quality components.
Key Responsibilities:
Set up, operate, and monitor EBW machines.
Prepare and inspect materials for welding.
Perform visual, mechanical, and NDT inspections.
Maintain equipment, records, and quality reports.
Collaborate with engineering and production teams.
Ensure compliance with health, safety, and cleanroom standards.
Essential Skills:
Strong knowledge of cleanroom assembly and integration.
Expertise in electron beam welding processes.
Proficient with measuring equipment and QC.
Ability to read and interpret engineering drawings.
Previous EBW or precision welding experience.
Background in manufacturing or industrial environments.
....Read more...
Advise the patient at the pharmacy counter, Dispensing prescription items, Checking stocks, Placing orders, receiving the prescriptions and handing out prescriptions. Responsible for the overall cleaniness of pharmacy area operated.Training Outcome:Will be able to be employed as dispenser or can continue on to the Level 3 Pharmacy Technician course.Employer Description:Community Pharmacy in Walthamforest AreaWorking Hours :21 hours per week as per the requirements of the training provider. Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience,Physical fitness....Read more...
We are expanding our team and looking for an Electron Beam Welder (EBW) Technician to support precision manufacturing in a cleanroom environment. This role involves operating and maintaining EBW machines, ensuring weld quality on metals and super alloys, and working closely with engineering teams to deliver high-quality components.
Key Responsibilities:
Set up, operate, and monitor EBW machines.
Prepare and inspect materials for welding.
Perform visual, mechanical, and NDT inspections.
Maintain equipment, records, and quality reports.
Collaborate with engineering and production teams.
Ensure compliance with health, safety, and cleanroom standards.
Essential Skills:
Strong knowledge of cleanroom assembly and integration.
Expertise in electron beam welding processes.
Proficient with measuring equipment and QC.
Ability to read and interpret engineering drawings.
Previous EBW or precision welding experience.
Background in manufacturing or industrial environments.
....Read more...
JOB DESCRIPTION
Euclid Chemical is currently seeking an experienced Maintenance Technician to join our team in Kirkland, IL. As our Maintenance Technician, you will be expected to perform repairs and complete preventative and predictive maintenance of mechanical equipment and facilities. This individual will also be responsible for inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits included but are not limited to:
Medical, dental and vision coverage Life Insurance Disability benefits 401k and Pension Vacation and Holiday time $26.00 - $27.00 per hour Annual Bonus Program
Duties and Responsibilities:
Repair or replace broken or malfunctioning components of machinery or equipment plant wide. Study blueprints or manufacturers' manuals to determine correct installation or operation of machinery. Observe and test the operation of machinery or equipment to verify adequacy of repair. Perform scheduled preventive maintenance on process equipment. Examine parts for defects, such as breakage or excessive wear. Clean, lubricate, or adjust parts, equipment, or machinery. Analyze test results, machine error messages, or information obtained from operators to diagnose equipment problems. Record repairs and maintenance performed. Record parts or materials used and order or requisition new parts or materials as necessary. Repair or replace broken or malfunctioning components of machinery or equipment plant wide. Study blueprints or manufacturers' manuals to determine correct installation or operation of machinery. Observe and test the operation of machinery or equipment to verify adequacy of repair. Perform scheduled preventive maintenance on process equipment. Examine parts for defects, such as breakage or excessive wear. Clean, lubricate, or adjust parts, equipment, or machinery. Analyze test results, machine error messages, or information obtained from operators to diagnose equipment problems. Record repairs and maintenance performed. Record parts or materials used and order or requisition new parts or materials as necessary.
Qualifications and Previous Experience:
High school diploma or GED 5+ years related experience and/or training Experience rigging heavy components and operating mobile equipment (fork lifts, man lifts, skid-steer, etc.) Proficiency with Microsoft Office packages - SAP a plus Apply for this ad Online!....Read more...
Applications are invited from suitably-qualified and experienced Pharmacy Technicians to join the Pharmacy team at our client's Acute Hospital site based in beautiful Bath, SomersetThis is a full-time permanent post but we are open to hearing from candidates seeking to negotiate a part-time hours opportunity.The Pharmacy supports the hospital with a ward and dispensary-based service and you will work alongside a clinical pharmacist and trainee pharmacy technicianAs part of the team you will oversea medicine management which includes prescribing, dispensing and ordering.You will also strive to ensure that service performance consistently meets high standards.This Hospital is an award-winning hospital, led by some of the South-West's most experienced consultants supported by 24/7 RMO cover on-site.Rated outstanding for caring, this unique centre of excellence was a long-established independent sector hospital, acquired through investment by the NHS in June 2021.The Hospital has 28 en-suite single inpatient beds, 22 day-case beds and 5 ambulatory care beds.Facilities include; 9 consulting rooms, 4 state-of-the-art operating theatres (2 with laminar flow), a JAG accredited Endoscopy suite, a dedicated cardiology suite and intervention treatment room.The dedicated physiotherapy department has a gym and four treatment rooms.The Digital diagnostic unit includes CT, MRI, General X-ray and UltrasoundPerson requirementsQualified Pharmacy Technician with full GPhC registrationCurrent or recent UK Hospital Dispensary-based experience The additional benefits of working for this organisation include:- Personal pension plan- Employee discount scheme- Life assurance- Bike to work scheme- Season ticket loan- Private medical insuranceWe are a leading healthcare recruitment partner with particular expertise in the placement of the full range of Healthcare staff, including Pharmacists and Pharmacy Technicians.As a nurse-led consultancy our detailed understanding of the complexity of such roles places us in an excellent position to match your skills with the specific requirements of our Clinical Recruiting Managers.For an insight into Jarrodean as a Consultancy and for a summary of all current roles visit jarrodean.comIf this role is not for you, please remember we offer a generous £500 Bonus for any successful friend or colleague referrals.....Read more...
DESIGN ENGINEER Location: SandbachSalary: £28,000 - £40,000
Are you an experienced Design Engineer with expertise in AutoCAD, Inventor or Solidworks? We are thrilled to present an exclusive opportunity to join our prestigious manufacturing client based in Sandbach. As their trusted recruitment partner, we are seeking a talented individual to join their CAD team due to their continued success and increasing demand for their exceptional products.
About the Role: As a Design Engineer, you will play a vital role within a collaborative team environment. Your primary responsibility will be to create technical drawings that precisely adhere to customer specifications, ensuring seamless production by the manufacturing team. Key aspects of the role include:
Utilising AutoCAD, Inventor and Solidworks to produce accurate and detailed drawings.
Developing scheme drawings and layouts for evaluation against customer requirements.
Generating manufacturing drawings with an emphasis on cost-effectiveness and ease of production.
Collaborating closely with colleagues across departments to ensure efficient project execution.
Key Requirements:
Proven experience as a Design Engineer, CAD Technician or other 3D Design role in a manufacturing environment.
Proficiency in AutoCAD, Autodesk Inventor or Solidworks.
Demonstrated ability to create high-quality manufacturing drawings.
Excellent communication skills, fostering effective collaboration with colleagues and customers.
Motivated, positive, and enthusiastic attitude towards work.
Proficiency in Microsoft Office and Google Docs, including spreadsheet management and Excel formulas.
How to Apply: If you are an experienced Design Engineer/CAD Technician seeking an exciting opportunity to contribute to a highly successful manufacturing company, we want to hear from you!Please submit your CV through this advertisement for immediate consideration.
By sending an application or applying for a job, you consent to your personal data being processed and stored by Get Recruited (UK) Ltd in accordance with our Cookie & Privacy Policy (available in the footer on our website). Get Recruited (UK) Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. We are an equal opportunities employer and we never charge candidates a fee for our services.....Read more...
Keep up to date with relevant legislation, standards and best practice in Safety, Health and Environment
Work with other departments and share information using a range of communication methods
Assist in conducting internal routine workplace inspections/audits and risk assessments
Contribute to the development and implementation of safety campaigns and improvement initiatives
Participate in internal HSE meetings and contribute to the continuous improvement of systems
Assist with monitoring and promoting compliance with environmental policies, such as waste disposal, pollution control, and resource conservation
Assist with investigating accidents, incidents, near misses and other incidents as directed
Assist in the planning of emergency preparedness and response activities
Assist in with managing and monitoring relevant budgets
Assist and be involved with HSE wellbeing initiatives
Training:
You will be studying a Safety, Health and Environment technician (Level 3) Apprenticeship standard over a 24-month period
This is a fully work-based programme - you will get allocated time to complete your apprenticeship work and also receive regular meetings with your training provider
Training Outcome:
Full time job role at the end of the apprenticeship with internal progression available for the right candidate
Employer Description:TT2 Limited, the operator of the iconic Tyne Tunnels, helps the 60,000+ customers who use the Tyne Tunnels each day to have the best journey experience possible. Our purpose is creating opportunities to deliver regional growth by offering the most reliable, safe, sustainable and efficient service and we have a rare and exciting apprenticeship opportunity for a Safety, Health Environment Technician to join our Health and Safety team at our premises in North Tyneside.
Our vision is to be recognised regionally as an organisation that provides significant value to the Northeast, and we are looking for proactive team members, who can support the Health and Safety team by providing high levels of customer care through operational efficiency.
We are certified as a Great Place to Work and we are committed to fostering a positive and inclusive environment, and we are seeking an individual that will compliment these values.Working Hours :Monday - Thursday, 08.30 - 16.30, and Friday, 08.30 - 16.00Skills: Administrative skills,Analytical skills,Attention to detail,Communication skills,Initiative,IT skills,Logical,Organisation skills,Team working....Read more...
Role and responsibilities:
Understanding machinery and facility operation to allow a rapid fault diagnosis and repair
Understand and use logical fault-finding techniques
Safe and correct use of hand-tools and equipment
Correctly follow any Safe Working Procedures to ensure safe outcomes
Update machine records with detailed descriptions of problems and resolutions to assist colleagues
Involvement in creating specifications for acquiring new machinery and equipment to ensure it is fit for purpose
Provide technical support on processes and equipment for other teams
Undertake specific training to enhance skills and knowledge
Work alongside the Health and Safety team to ensure all work is delivered safely and to continually strive to reduce any risks
Be aware of new technologies to support the manufacturing processes such as automation, cameras, sensors etc.
Work with other teams in the business, such as Production, H&S and R&D to facilitate process improvements ensure smooth integration of new processes, products and equipment
Undertake planned and preventative maintenance and develop planned maintenance activities to increase machine reliability
Identify spares requirements to facilitate accurate parts ordering
In addition to, or substitution for, your normal duties we may require you to undertake other duties as required
Training:
Maintenance and Operations Engineering Technician Level 3 Apprenticeship Standard
Training will be Day release at St Helens College STEM Centre Campus
Training Outcome:Potential to progress onto the following roles:
Maintenance Technician
Maintenance Team Leader
Maintenance Engineering Manager
Employer Description:We take great pride in manufacturing and distributing high-quality PVC-U building products through our extensive network of 100 depots across the UK.
From fascias, soffits, gutters and cladding to windows, doors and bi-folds, you’ll need to look no further. GAP is also the home of Rockdoor – the most secure and thermally efficient composite door available.
We service customers from local window and door installers, through to regional and national house builders and refurbishment contractors.Working Hours :Monday-Thursday, 07:15 - 16:00. Friday, 07:00 - 14:30.Skills: Communication skills,Attention to detail,Problem solving skills,Team working,Proactive approach,Good work ethic,Technically Capable....Read more...
PureAquatics is a specialist aquatics business based in Bristol, but they are opening a new location in Leighton Buzzard. They design, install, and maintain aquariums for a wide range of clients across the UK, from residential homes to large organisations like the NHS. Their work involves everything from small tropical fish tanks to large custom-built aquariums.
As an Aquatics Technician Apprentice, you'll play a hands-on role in the day-to-day care of aquatic animals and assist the experienced team with installations and maintenance services. You'll gain valuable experience in animal husbandry, learn how to work with aquatic and reptile species, and develop technical skills involved in setting up and maintaining aquariums. You'll work alongside lead technicians, and over time, you'll build the skills and confidence to attend site visits independently. This role is ideal for someone who loves animals (especially reptiles!), enjoys practical work, and is looking for a career that offers variety, travel, and progression.
Key responsibilities include:
Assisting with the setup and installation of aquariums.
Supporting the maintenance of tanks (cleaning, water testing, and equipment checks).
Caring for aquatic animals, reptiles and amphibians (feeding, cleaning, health monitoring).
Keep accurate records of animal care and maintenance work.
Attending site visits with the team to work on client locations across the UK.
Helping to improve, clean, and transport equipment and livestock safely.
A full driving licence and own vehicle is essential in this role as you will be required to go to the Bristol office monthly.Training:All training will be provided on site during your paid working hours. Your day to day mentoring will be with your employer, and a combination of online and in person monthly sessions will be held with your Haddon Training Trainer Coach.Training Outcome:
Progression into a fully qualified Aquatics Technician role within the team
Further sector training
Employer Description:PureAquatics design, install, rent and maintain tanks for Freshwater, Cold water and Marine Aquariums for both commercial business and private aquarium owners.Working Hours :This will be working Monday to Friday, 35 hours per week, shifts TBC.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Presentation skills,Administrative skills,Logical,Team working,Initiative....Read more...
Learn from IT colleagues and apprenticeship training provider, completing all required coursework.
Deliver friendly, efficient first-line IT support to staff, students, and visitors in person and remotely, logging all tasks in the Helpdesk system.
Set up, maintain, and repair IT equipment; escalate issues when needed.
Monitor and manage IT consumables, audiovisual systems, and support school events.
Assist with system compliance, IT policies, GDPR, and health & safety requirements.
Support the Network Administrator with device management, backups, group policy, and workload cover.
Diagnose and repair hardware/software faults; support applications, mail systems, AV, telephony, and peripherals.
Assist with credential management, software installations/updates, antivirus, wireless setup, and access points.
Provide support for cashless catering solutions and asset management.
Help monitor filtering, networking, broadband, and servers where possible.
Support remote access for users and suggest improvements to IT provision.
Create and maintain IT documentation and deliver staff training when appropriate.
Training:
15 - 18 Months. Start as soon as possible.
Apprenticeship level: Advanced - Level 3 (A level).
Information and Communications Technician Level 3 Apprenticeship Standard.
CompTIA A+.
AZ - 900.
Remote Learning.
Training Outcome:Fixed term contract: 15 months.Employer Description:Are you a passionate and committed technology enthusiast with a desire to learn and grow in the IT field? Do you love to challenge ideas, suggest alternatives, and help others get the most out of their technology? If so, we want you to join our supportive team as an IT Technician Apprentice at Onslow St Audrey’s School, part of the Danes Educational Trust.
Working with our supportive and experienced team you will learn from IT colleagues to develop your skills in an accredited apprenticeship program to gain a nationally recognised qualification while providing essential first-line IT support. At Onslow St Audrey’s School, we're dedicated to using technology to enhance teaching and learning, empowering all staff and students with a modern and effective network.Working Hours :Monday to Thursday 8am to 4pm. Friday 8am to 3:30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative....Read more...
Validation and Verification Technician required to work within an iterative design process test facility preparing and conducting engineering tests and report results.
The role requires a combination of practical skills an understanding of Quality Management and the impact of non conformances on the performance of equipment and systems.
Skills
General mechanical fitting or electrical experience.
Assist with the design and development of mechanical and electrical test fixtures.
Undertake timely diagnosis and fault finding
Experience in an electrical or mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical or electrical engineering.
Responsibilities
Ensure all test activities are conducted safely. Participate in creation and review of Hazard Analysis and Risk Control for these activities.
Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them.
Use the guiding principles and tools of the QMS to drive continuous improvement, wherever applicable.....Read more...
Test Technician required to work within an iterative design process test facility preparing and conducting engineering tests and report results.
The role requires a combination of practical skills an understanding of Quality Management and the impact of non conformances on the performance of equipment and systems.
Skills
General mechanical fitting or electrical experience.
Assist with the design and development of mechanical and electrical test fixtures.
Undertake timely diagnosis and fault finding
Experience in an electrical/mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical or electrical engineering.
Responsibilities
Ensure all test activities are conducted safely. Participate in creation and review of Hazard Analysis and Risk Control for these activities.
Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them.
Use the guiding principles and tools of the QMS to drive continuous improvement, wherever applicable.....Read more...
Providing safe and effective pharmaceutical services, including working towards dispensing medications
Offering advice to patients
Managing pharmacy operations
Stock intakes
Serving customers
The ideal candidate will have a strong understanding of community pharmacy practices, excellent communication skills, and a commitment to patient care
Training:Pharmacy Services Assistant Level 2.Training Outcome:Dispenser - possibly pharmacy technician. Employer Description:Community Pharmacy – Elland Pharmacy.Working Hours :Monday to Friday typically 8 hours per day - depending on the day and other staff working between the hours of 9am and 9pm with one hour break per day.Skills: Communication skills,Attention to detail,Organisation skills,Administrative skills,Number skills....Read more...
Attending college 1 day per week
Servicing & Breakdown of Air/Water tower
Servicing &Breakdown of Forecourt Vacuum
Servicing & Breakdown of Jet Wash
Servicing & Breakdown of Vehicle Wash
Servicing & Breakdown of Commercial Vehicle Wash
Training:
Maintenance and Operations Engineering TechnicianLevel 3 (A level) Apprenticeship Standard
Training Outcome:
The role carries a permanent position on completion of the apprenticeship
Employer Description:Wilcomatic has 135 employee’s and is the UK’s leading provider of wash systems for both road & rail.Working Hours :Monday - Friday, Shifts to be confirmed.Skills: Communication skills,Attention to detail,Problem solving skills,Number skills,Team working....Read more...
Validation and Verification Technician required to work within an iterative design process test facility preparing and conducting engineering tests and report results.
The role requires a combination of practical skills an understanding of Quality Management and the impact of non conformances on the performance of equipment and systems.
Skills
General mechanical fitting or electrical experience.
Assist with the design and development of mechanical and electrical test fixtures.
Undertake timely diagnosis and fault finding
Experience in an electrical or mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical or electrical engineering.
Responsibilities
Ensure all test activities are conducted safely. Participate in creation and review of Hazard Analysis and Risk Control for these activities.
Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them.
Use the guiding principles and tools of the QMS to drive continuous improvement, wherever applicable.....Read more...
Test Technician required to work within an iterative design process test facility preparing and conducting engineering tests and report results.
The role requires a combination of practical skills an understanding of Quality Management and the impact of non conformances on the performance of equipment and systems.
Skills
General mechanical fitting or electrical experience.
Assist with the design and development of mechanical and electrical test fixtures.
Undertake timely diagnosis and fault finding
Experience in an electrical/mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical or electrical engineering.
Responsibilities
Ensure all test activities are conducted safely. Participate in creation and review of Hazard Analysis and Risk Control for these activities.
Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them.
Use the guiding principles and tools of the QMS to drive continuous improvement, wherever applicable.....Read more...
Job Title: Quality Assurance TechnicianSalary: £27,500 - £30,000 per annumLocation: Sittingbourne, ME10Department: TechnicalReports to: Technical Manager Job SummaryAs Quality Assurance Technician, it will be your job to actively manage areas such as legal compliance, food safety, hygiene and ensuring that agreed quality standards are met.You will work closely with the Unit Leaders to ensure legality, safety and quality of products are not compromised. In addition, ensure effective systems and monitoring processes in line with IFS / BRCGS standards and relevant customer standards and specifications are adhered to.Communication
Clearly, and effectively communicate quality and non-conformance issues to relevant Unit Leaders/ManagersKeep the Technical Manager fully informed and up to date on any quality related matters
Strategic
Have a good understanding of HACCP, IFS / BRCGS and Safety Culture (IAuditor)
Responsibilities
Assist with the with the implementation of all food safety programs (IFS, BRCGS, GMPs and other)Complete daily GMP and hygiene auditsOther routine audit checks include glass, pest control and monthly first aid box checksCarry out internal audits collating and presenting data for continuous improvement. Complete daily weight checks, product checks (including 1st off’s) and batch checks Inspect raw materials to ensure consistency and integrityMaintain, test and troubleshoot relevant instrumentation devicesCreate labels in ClarisoftDeal with quality issues and manage solutions in line with non-conformance procedureEnsure staff are maintaining a high level of accuracy and a low level of errors when carrying out routine checks. Where applicable instigate corrective/preventive actions.Liaise with Unit Leaders to facilitate the site’s “CLEAN AS YOU GO” policyOrganising samples for new businessAttend food safety forum meetings and HACCP review meetingsAny other reasonable task that may be required by the technical department
Compliance:
Implement new and existing legal requirements relating to food safety, and health & safety.Personally, comply with all policies, procedures and risk assessments relevant to role of Quality Assurance Technician.
Personal attributes required:
Ability to communicate both verbally and in writingAbility to lead by influencingGood interpersonal skillsComputer literacy (Word, Excel etc) Experience with Orderwise and Safety Culture (IAuditor) would be an advantageAttention to detailAbility to assist in solving problems/offer solutions
Working hours:
Monday – Thursday 06:00 – 16:00Occasional working outside standard working hours to meet business needs. Notice would be given in such instances.
Deputising/absence cover: The responsibilities listed above shall be covered by the Technical Assistant in the event of absence If this sounds like the opportunity for you, please apply ASAP.*PLEASE NOTE – by applying to this position, you agree for your CV to be submitted to our client, who shall contact you directly, should your application make their short-list. You also agree to our Privacy Policy: acapella-recruitment.co.uk./privacy-policy.html which can be found on our website.....Read more...
The Service Department is vital to the success of our business. From right first-time fixes, to delivering excellent customer service, our Service Technicians/Mechanics play a pivotal role in delighting our customers and encouraging their continued loyalty.
Every day is different within the Service department. As a Service Technician/Mechanic apprentice, some of your duties will include:
Use of diagnostic equipment to identify vehicle faults
Testing of parts and systems to ensure correct working
Following checklists to ensure all critical parts of vehicles are examined
Carrying out bumper-to-bumper overview, service, and inspection
Maintenance of electronic systems, including on-board entertainment systems
Undertaking repair and maintenance of vehicle parts, including clutches, gearboxes, tyres, brakes, and suspension
Completion of legible and accurate paperwork for the customers and the centre's records
Maintenance of a clean and tidy work environment
You will have the opportunity to work with a wide range of products, including traditional, hybrid and electronic engines. From heritage vehicles to leading-edge modern technology, our range will provide you with a varied technical training experience to build your skills as a Service Technician/Mechanic.
Our ideal candidate will be able to demonstrate skills in logic and problem-solving. You should be someone who pays attention to detail and is committed to completing this three-year training programme.
We are looking for people who are passionate about our industry and our brand. Some of the personal skills that you should think about showing us in your application are:
Enthusiasm and willingness to learn
Teamwork
Strong communication
Customer service
Interest in vehicle engineering
We are looking for an enthusiastic, hardworking individual to join our team and embark on a long-term career, with excellent earnings and progression opportunities once you complete your apprenticeship.Training:Training will be delivered using a combination of virtual classroom, remote learning and face-to-face block release weeks at our state-of-the-art training centre.
Our expert trainers will guide you through the training programme using a combination of e-learning, classroom learning and practical application.
In the workplace, your personal, dedicated mentor will support your continued learning as you apply the skills and knowledge you have gained through the remote sessions and at the Volkswagen Group National Learning Centre.
This is a fully rounded training experience where you will build life skills that last and gain both apprenticeship qualifications and brand certifications. As an apprentice, you will also have the opportunity to attend Outward Bound, a personal development week which supports with developing resilience, confidence, and teamwork skills.
On successful completion of the three-year programme, you will receive the following:
Level 3 Apprenticeship Standard in Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Certificate in Automotive Refrigerant Handling
Brand-specific certifications
Training Outcome:Volkswagen Group (VWG) is one of the UK’s largest car retailers encompassing premium brands such as Audi, Bentley, SEAT, ŠKODA, Volkswagen, TPS, Volkswagen Group Paint and Body and Volkswagen Commercial Vehicles. This network of retailers spans the UK, providing a wide range of career opportunities.
Once your apprenticeship is complete, you will continue your learning journey and you will have the opportunity to drive your career forward. Some of our apprentices have gone on to become team leaders and managers within the retail network or even joined our team at Head Office in Milton Keynes.Employer Description:ŠKODA is driven by something different. What are you driven by? We are looking for ambitious, dynamic, and enthusiastic people to join our apprenticeship programme. If you are customer focused, forward thinking and want to learn, then we can give you the life and technical skills you need to be part of our team.Working Hours :Monday – Friday. 0830 – 1730.
Possibility of Saturday workings and / or shifts.
Working week will be confirmed on application.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
The Service department is vital to the success of our business. From right first-time fixes, to delivering excellent customer service, our Service Technicians/Mechanics play a pivotal role in delighting our customers and encouraging their continued loyalty.
Every day is different within the Service department. As a Service Technician/Mechanic apprentice, some of your duties will include:
Use of diagnostic equipment to identify vehicle faults
Testing of parts and systems to ensure correct working
Following checklists to ensure all critical parts of vehicles are examined
Carrying out bumper to bumper overview, service, and inspection
Maintenance of electronic systems including on- board entertainment systems
Undertaking repair and maintenance of vehicle parts including clutches, gearboxes, tyres, brakes, and suspension
Completion of legible and accurate paperwork for the customers and centres records
Maintenance of a clean and tidy work environment
You will have the opportunity to work with a wide range of products including traditional, hybrid and electronic engines. From heritage vehicles to leading edge modern technology, our range will provide you with a varied technical training experience to build your skills as a Service Technician/Mechanic.
Our ideal candidate will be able to demonstrate skills in logic and problem solving. You should be someone who pays attention to detail and is committed to completing this three year training programme.
We are looking for people who are passionate about our industry and our brand. Some of the personal skills that you should think about showing us in your application are:
Enthusiasm and willingness to learn
Teamwork
Strong communication
Customer Service
Interest in vehicle engineering
We are looking for an enthusiastic, hardworking individual to join our team and embark on a long term career, with excellent earning and progression opportunities once you complete your apprenticeship.Training:Training will be delivered using a combination of virtual classroom remote learning and face-to-face block release weeks at our state-of-the-art training centre.
Our expert trainers will guide you through the training programme using a combination of e-learning, classroom learning and practical application.
In the workplace, your personal, dedicated mentor will support your continued learning as you apply the skills and knowledge you have gained through the remote sessions and at the Volkswagen Group National Learning Centre.
This is a fully rounded training experience where you will build life skills that last and gain both apprenticeship qualifications and brand certifications. As an apprentice, you will also have the opportunity to attend Outward Bound, a personal development week which supports with developing resilience, confidence, and teamwork skills.
On successful completion of the three year programme, you will receive the following:
Level 3 Apprenticeship Standard in Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Certificate in Automotive Refrigerant Handling
Brand specific certifications
Training Outcome:Volkswagen Group (VWG) is one of the UK’s largest car retailers encompassing premium brands such as Audi, Bentley, SEAT, ŠKODA, Volkswagen, TPS, Volkswagen Group Paint and Body and Volkswagen Commercial Vehicles. This network of retailers spans the UK, providing a wide range of career opportunities.
Once your apprenticeship is complete, you will continue your learning journey and you will have the opportunity drive your career forward. Some of our apprentices have gone on to become team leaders and managers within the retail network or even joined our team at Head Office in Milton Keynes.Employer Description:ŠKODA is driven by something different. What are you driven by? We are looking for ambitious, dynamic, and enthusiastic people to join our apprenticeship programme. If you are customer focused, forward thinking and want to learn, then we can give you the life and technical skills you need to be part of our team.Working Hours :Monday– Friday. 0830– 1730.
Possibility of Saturday workings and / or shifts.
Working week will be confirmed on application.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
We are currently looking for a Maintenance Engineer with a leading UK manufacturer in the area of Leighton Buzzard.This role is Monday to Friday role and offers a salary circa £54,120+ depending on experience, as well as fantastic company benefits such as pension of up to 10%, overtime (x1.5/x2) and further training and career development opportunities with a company that values its employees.What’s in it for you as Maintenance Engineer
Salary of £54,120+ per annum, plus overtime at a premium (x1.5/x2)
In addition, you have a pension of up to 10%, share options, as well as an extensive benefits program such as a cycle to work scheme, shopping discounts etc
Hours of work are Monday to Friday - 40 hours per week. The shift pattern Mornings, afternoons and Nights
Industry leading training and career development, including health and safety training, cross-skilling and upskilling such as PLC training
Leadership and management training for those who are keen to progress their careers and demonstrate ambition
Job security and personal career development opportunities within a market-leading, international manufacturing organisation
Key responsibilities of Maintenance Engineer
Providing plant-wide maintenance service, departmental support and repairs on a wide range of machinery such as invertors, motors, conveyor-based systems, panels, PLC’s and automation machinery
Within the position you will have the opportunity to be involved with a wide range of maintenance operations and projects, which will be supported by a wide range of training opportunities, including accredited training programs.
The ability to work within a skilled team of engineers permanently.
PPM and reactive maintenance of industrial scale production machinery
We welcome applications from individuals who have experience as a Mechanical Engineer. Electrical Engineer Mechanical or Electrical Technician, Maintenance Technician, or Multi-Skilled Engineering Maintenance background.Experience and Qualifications Required for Maintenance Engineer
Engineering qualified by either a full Advanced Mechanical or Electrical Apprenticeship (Level 3) OR NVQ Level 3 AND BTEC Level 3 in Engineering – UK equivalent Mechanical Electrical Engineering qualifications to Level 3
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities
Previous experience in undertaking maintenance within a fast-paced manufacturing environment
Ability to fault find, repair and provide solutions to Mechanical and Electrical problems
Please Apply Now!!....Read more...
You will be working across a range of departments with different print technologies, including flexographic, hot stamp foil, digital inkjet and thermal transfer.
You will be involved with producing a wide range of labels, including asset labels, security labels, warehouse labels, barcode labels, cable labels and packaging labels.
You will learn to operate multiple machines, including Focus rotary machines, Newfoil hot foil machines and Roland digital printers.
The digital departments use multiple software programmes such as Adobe, Versaworks and Colorgate.
Over the course of the apprenticeship, the candidate will spend time learning all our print methods. They will spend time in each department, initially shadowing a member of the production team and then getting hands-on printing labels. Full training will be provided. As well as printing, there will also be tasks such as finishing and packing. Examples of specific tasks are as follows:
Set up cutters and print stations according to a job sheet specification
Colour matching and quality checking samples
Keeping a check on job progress, checking continuous quality and ink levels
Hand finishing labels into sheets
Rewinding labels into small rolls
Packing jobs ready for dispatch
Machine maintenance
Operate plotter tables
Troubleshooting and problem solving
Laminating material constructions
Completing product specification sheets and updating the company database
Stock control of materials and inks
Liaising with the office via email/telephone
Training:Full training will be provided in-house alongside a Level 3 Print Technician qualification delivered by BPIF Training, which will take place via a mixture of on-site and online sessions.
Candidate may be required to attend external training courses as and when required.
Health & Safety training in houseTraining Outcome:Upon completion of the apprenticeship there will be a full-time role working as a print technician.Employer Description:A label manufacturing company based in Netherton, West Midlands established in 1999 specialising in the production of flexo and digitally printed labels & tags for an array of sectors including warehouse and distribution, pharmaceutical, manufacturing and sales & service. We currently have 11 production staff, 1 store man and 9 office staff.Working Hours :Mon-Fri 8 am-4 pm or 9 am-5 pm (1/2 hour lunch).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Maintenance & Operations Engineering Technicians will work on various types of plant and equipment commonly found throughout the Engineering Industry.
Technicians will undertake installation, testing, servicing, removal, replacement, maintenance and repair of a range of equipment, sometimes complex, as part of planned preventative and reactive maintenance programmes. They may also undertake decommissioning activities when plant is being removed from service.
You will be responsible for the quality of your own work, possibly others’ and ensuring the work is completed safely, meets stakeholder quality, time and budget requirements, whilst maintaining the efficient running of plant and equipment.
Repair cleaning machines to the required standard
Test completed machines for quality & performance
Keep accurate records
Inventory booking
Work within health & safety guidelines
Maintain a clean and tidy work area
Training:
Level 3 Maintenance and Operations Engineering Technician qualification
Apprentices must achieve Level 2 English and mathematics prior to taking the end-point assessment for the apprenticeship if you haven’t achieved them on entry
Training schedule has yet to be agreed. Details will be made available at a later date
Training Outcome:
We would expect the successful apprentice to move onto be a Nilfisk Engineer in the Workshop or a Mobile Service Technician, maintaining machines at customers sites!
As a global company we pride ourselves on having opportunities for progression on a global scale!
Employer Description:The company was founded on a vision of producing and selling products of the highest quality worldwide and for more than a hundred years, Nilfisk has adapted to the changing needs of markets and customers with innovative products and solutions. With a global sales force and proven sales channels, we have established strong and valuable customer relations and partnerships across the world and we strive to be at the forefront of technological advancement to drive future customer needs.
Today, Nilfisk offers an extensive range of premium cleaning products and a trusted aftermarket offering to the professional market. Our main product lines are floorcare equipment, vacuum cleaners and high pressure washers and a wide range of domestic vacuum cleaners and high pressure washers to consumers worldwide.Working Hours :37.5 hours a week (days to be confirmed).
8.00am - 4.00pm, with half an hour unpaid break for lunch.
Training schedule to be set by the college.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Electrical/Wiring Knowledge,Engine and Hydraulic Knowledge....Read more...
