Test Engineer – Hydraulics Ramsgate, Kent £££ DOE Permanent, Full Time - 08:00 – 16:30 Mon – Thurs, 15:30 finish on FridaysBenefits:
Extremely Competitive Salary (sorry, our client does not want us to advertise this but we’ll tell you as soon as you call/email for further info)Great place to work2 x standard contributory pensionGood career progressionFree Parking
What you’ll need:• Proven experience in mechanical/hydraulic systems• Proven experience in a hydraulic testing environment• Proven experience in reading and interpreting hydraulic system and mechanical engineering drawings/plans• Prior experience for hydraulic/mechanical assemblies including fault finding and problem solvingThe Job – Test Engineer – Hydraulics
Hydraulic testing of pumps, motors, valves, actuators from a variety of rotary and fixed wing aircraft platforms.Technical support, fault diagnoses for hydraulic and mechanical fluid power systems.Stock control of hydraulic fluid and consumables.Deliver daily weekly maintenance of test rigs.Support Production Planning.Meet quality requirementsContinually improving safety, addressing both physical safety and safety attitudes.
About You – Test Engineer - Hydraulics
Experience in mechanical/hydraulic systemsExperience in a hydraulic testing environmentExperience in reading and interpreting hydraulic system and mechanical engineering drawings/plansExperience for hydraulic/mechanical assemblies including fault finding and problem solving
Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment Agency Due to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment Agency Due to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.....Read more...
Are you an Electronic Hardware Design Engineer looking to join a leading engineering team, in Clacton On Sea, Essex? This fantastic Electronic Hardware Design Engineer role offers the chance to work with a growing company providing a range of high-performance products to a vast range of industries.
The Electronic Hardware Design Engineer position will be responsible for:
Leading the design and development of digital and analogue hardware products
Creating detailed schematics and PCB layouts using Altium designer
Managing and leading product development projects from concept through to production
Conducting hardware debugging and validation using test equipment
As the Electronic Hardware Design Engineer you will need:
Experience in hardware design and development
An understanding of circuit design principles, including power supplies, signal integrity, and noise mitigation
Hands-on experience with lab equipment
Altium Designer experience is advantageous
APPLY NOW for this Electronic Hardeware Design Engineer job, Clacton On Sea, send your CV to Tom Drew, TDrew@redlinegroup.Com, or call Tom on 01582 878 848 / 07961158762 quoting ref RSP1201. If you would like to discuss any other Engineering positions we always welcome the opportunity.....Read more...
As a Software Engineer degree apprentice, you'll learn how to be accountable for the undertaking and completion of the analysis of software engineering business issues for either the entire requirement or subset thereof dependent on complexity and/or scope size
You'll be instrumental in implementing Glue's software solutions, or part thereof, dependent on complexity, scope size and technology into the environment required (including systems test, user test environment, or live environment as appropriate)
You'll be directly involved in the creation of an over-arching software solution design suitable to resolving our clients' business issues for either the entire requirement or a subset thereof dependent on complexity and/or scope size.
You'll assist in building our software solutions, or part thereof, dependent on complexity, scope size, and technology
As you grow in your role on our team, you may also be required to supervise the work of more junior team members undertaking work in the software solution life-cycle
As a Software Engineer, you'll test that the software solution, or part thereof, dependent on complexity, scope size and technology meets the business needs identifying any remedial actions required
You will work closely with all key stakeholders to ensure the software solution or part thereof, dependent on complexity and scope size, is understood and correctly used
You'll facilitate ongoing support of our software solutions or part thereof, dependent on complexity and technology, e. g. by troubleshooting, reverse engineering and conducting root cause analysis
As a Software Engineer degree apprentice, you'll learn how to apply engineering principles to all stages of the software development process, from requirements, analysis and design, development and data requirements
You will typically work as part of a large collaborative team and will have responsibility for significant elements of software solutions
Training:Teaching will take place at Queen Mary University London (QMUL) which will be the course provider for this degree apprenticeship You’ll have one day of teaching per week on campus at QMUL in London Training Outcome:If the apprentice is successful in their studies and work placement there is the potential to continue in the company as a graduate.Employer Description:Glue Reply is the outcome-focused Architecture specialist within the Reply Group. Through services encompassing Business Change/Transformation, Strategy & Architecture, Data exploitation and Integration, Glue Reply is able to help its clients succeed by turning strategy into tangible solutions and vision into practical outcomes. Glue Reply diagnoses the challenges and advises on the way to make real impact – enabling its clients to deliver.Working Hours :Shift Days (including college day): Monday - Friday
Day Hours: 9am-5.30pmSkills: Communication skills,Organisation skills,Administrative skills,Analytical skills,Logical....Read more...
A job as a Product Engineer has urgently arisen for a global leading Semiconductor Manufacturing company, based in Oldham, Manchester.
A great opportunity has arisen for a Product Engineer to join my client, based in Oldham, Manchester who will play a pivotal role in the development of electronic transistor products. This person will work closely with the design and marketing teams to assist with the development of new product requirements, creating test data sheets and supporting documentation.
The Product Engineer based in Oldham, Manchester, will ideally have experience across;
A Degree or Master’s in Electronic Engineering or similar
Product Engineering or Project Management understanding with excellent communication skills to liaise with multiple departments
An understanding of reading and interpreting electronic circuits
This is an opportunity to take a step into a highly technical field of semiconductor engineering!
APPLY NOW, if this Product Engineer job in Oldham, Manchester sounds like the opportunity for you. Alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1327. If this job is not suitable but you are looking for a job within Manufacturing and Operations, please call 01582 878 848 for a confidential discussion.....Read more...
.NET Software Engineer, North Charleston, SC
.NET Software Engineer, North Charleston, SC
(Tech stack: .NET Software Engineer, Senior Software Developer, .NET 8, C#, .NET Core, .NET, MAUI, MS SQL, HTML, CSS, Azure, Visual Studio)
I'm recruiting on behalf of my client, a leading wellness company based in North Charleston, SC, who are looking to add a talented .NET Software Engineer to their growing team.
This is an exciting opportunity to join a business that's passionate about innovation, technology, and making a real difference in people's lives. You'll be working on a variety of projects across mobile development, AI-driven solutions, cloud deployment, and more — all within a highly collaborative and forward-thinking environment.
The Role:
Develop, test, and maintain high-quality software applications using .NET technologies.
Design and manage databases with SQL Server, ensuring data integrity and optimizing performance.
Use Microsoft Entity Framework for efficient data access and manipulation.
Build cross-platform mobile applications using .NET MAUI.
Create AI-powered solutions to automate processes and support core business functions.
Test and debug APIs using Postman.
Apply object-oriented programming principles to create scalable, maintainable code.
Participate fully in Agile ceremonies including sprint planning, daily stand-ups, and retrospectives.
Implement real-time communication features using SignalR.
Deploy and manage applications in Azure, leveraging cloud services for scalability and performance.
What We're Looking For:
3-5 years of software development experience.
Strong technical skills across .NET, SQL Server, Entity Framework, .NET MAUI, Postman, OOP, Agile, SignalR, and Azure.
A solid problem-solver with excellent analytical skills.
Strong written and verbal communication skills.
A true team player who thrives in a collaborative environment.
Why Apply? You'll have the chance to work on impactful projects in a supportive company that values growth, innovation, and wellness — both for their customers and their employees.
If you're a motivated .NET Software Engineer looking to take the next step in your career, I'd love to hear from you. Please apply now or get in touch directly for a confidential discussion.
Location: North Charleston, SC, USA
Salary: $80,000 - $90,000 + Bonus + Benefits
Applicants must be based in the USA and have the right to work in the USA even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUSANETREC
NOIRUSAREC
NC/NET/HOU450563....Read more...
Electronic Test EngineerAerospace & DefencePortsmouthUp to £35,000 DOE
*Successful candidates will need to undergo a Security Clearance check*
Global Aerospace & Defence organisation, servicing UK and US government agencies, delivering multi-billion-pound programmes of work.
Key Responsibilities:
Testing a range of low/medium electronic manufactured products for the Ministry of Defence.
Diagnosing a range of low/medium electronic manufactured products to component level.
Background required:
HNC or equivalent qualification OR relevant Electronic Test experience.
What’s on offer:
Salary up to £35K DOE + opportunity to earn more with generous optional overtime pay + Private Healthcare + Share Schemes + 25 days leave rising with service (bank holidays on top) + Pension + life assurance and more.
Extensive career development and progression opportunities tailored to your goals.
....Read more...
We are looking for an Engineer with a passion for automotive and motorsport technology to support product validation and testing. You will take ownership of testing activities and production stages, ensuring functionality, performance, and reliability meet high standards.
Key Responsibilities:
Plan, execute, and report on product testing activities.
Develop and maintain test plans, tools, and documentation.
Collaborate with cross-functional teams to resolve issues.
Provide feedback on product performance and usability.
Requirements:
Degree in Engineering or related field.
Strong problem-solving and communication skills.
Detail-oriented with a hands-on approach.
Interest in automotive systems and testing.
Full UK driving licence and ability to commute to site.
Familiarity with vehicle sensors or embedded systems.
Experience with manual and automated testing and test tools (e.g. oscilloscopes).
Knowledge of Python or C++ a plus.
Benefits:
Competitive salary, profit-related bonus
Private medical and mental health support
Gym discounts and wellness rewards
Enhanced pension and share options
EV salary sacrifice scheme (free charging on-site)
25 days holiday and bank holidays....Read more...
We are looking for an Engineer with a passion for automotive and motorsport technology to support product validation and testing. You will take ownership of testing activities and production stages, ensuring functionality, performance, and reliability meet high standards.
Key Responsibilities:
Plan, execute, and report on product testing activities.
Develop and maintain test plans, tools, and documentation.
Collaborate with cross-functional teams to resolve issues.
Provide feedback on product performance and usability.
Requirements:
Degree in Engineering or related field.
Strong problem-solving and communication skills.
Detail-oriented with a hands-on approach.
Interest in automotive systems and testing.
Full UK driving licence and ability to commute to site.
Familiarity with vehicle sensors or embedded systems.
Experience with manual and automated testing and test tools (e.g. oscilloscopes).
Knowledge of Python or C++ a plus.
Benefits:
Competitive salary, profit-related bonus
Private medical and mental health support
Gym discounts and wellness rewards
Enhanced pension and share options
EV salary sacrifice scheme (free charging on-site)
25 days holiday and bank holidays....Read more...
Dia-Stron in Andover, UK and Bossa Nova Vision in Los Angeles, USA (a fully owned subsidiary of DiaStron) design and manufacture instruments used in natural and synthetic fibre testing laboratories around the world.
They are primarily used to test the hair care products and combine both physical and optical technologies to give the user as much data as possible to make science founded decisions.
The apprentice mechatronics engineer will work in the New Product Development team to contribute to and learn about designing and testing new instruments capable of testing 100’s of fibre samples with minimal human intervention. Mechanical, electronic, software and control engineering aspects are required to design a good instrument.
This role will primarily focus on the control and instrumentation aspect and as minimum lead to a level 6 degree qualification.Training:
Embedded electronic systems design and development engineer (degree)
1 day per week at college during term term, otherwise on site at Dia-Stron, Andover UK
Training Outcome:
A successful apprentice will progress to a full time role in engineering, sales, service or product development role in Dia-Stron
Employer Description:Dia-Stron in Andover, UK and Bossa Nova Vision in Los Angeles, USA (a fully owned subsidiary of DiaStron) design and manufacture instruments used in natural and synthetic fibre testing laboratories around the world. They are primarily used to test the hair care products and combine both physical and optical technologies to give the user as much data as possible to make science founded decisions.Working Hours :Monday - Friday, 8.30am - 5.00pm with some flexitime.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Graduate Software Engineer – C/IoT
An exciting opportunity has opened up for a Graduate Software Engineer – C/IoT to join a leading company known for designing and developing advanced electronic systems. Based in Ipswich, Suffolk, this is a great chance to launch your career, working on real-world projects involving embedded software and IoT-connected products.
You’ll be part of a supportive engineering team, helping to design, develop and test software for innovative, next-generation electronic devices.
The Graduate Software Engineer – C/IoT, based in Ipswich, Suffolk, will be involved in:
Writing embedded software in C for microcontroller-based systems
Working closely with hardware engineers to ensure smooth integration
Supporting development of IoT-connected features (e.G. Wi-Fi, Bluetooth, MQTT)
Testing and debugging embedded software using standard lab tools
The ideal candidate for the Graduate Software Engineer – C/IoT role, based in Ipswich, Suffolk will have:
A degree in a relevant subject such as Embedded Systems, Electronics, Computer Engineering or similar
Good understanding of embedded C programming, ideally from university or personal projects
Interest in IoT technologies and how connected devices work
Some familiarity with debugging tools or version control (e.G. Git)
To apply for this role please send your CV to NDrain@redlinegroup.Com or call Nick on 07487756328 / 01582878828....Read more...
6 - 12 months of product specific site based training on all aspects of transformer design and manufacture. This will include all areas of the business from the tender stage through to the final test
Maintenance, repair, installation and retrofit of the company's range of Tapchanger and Transformer products, both on site and in our Loughborough factory. The initial 12 months will be factory-based
Disassemble, overhaul, fault find, repair, rebuild Tapchanger’s, transformers both on-site and in-work as required
Work to specifications and technical requirements
Undergo training as necessary to ensure that current and future H&S requirements are met at all times
Work in accordance with on-site risk assessments on every assignment
Provide written reports on completion of each assignment
Training:
Primarily based in the workplace
Apprentices attend Loughborough College on block release to study Level 4 Higher National Certificate/Higher Technical Qualification in Engineering
Trainer / Assessor to visit in the workplace
Training Outcome:Potential progression into roles such as Field Service Engineer, Commissioning Engineer, Site Test Technician and eventually into Senior Service Engineer or Service Manager.Employer Description:We provide agile and adaptive engineering solutions and products, including consultancy services, design and project management as well as award-winning product technology, to a wide range of projects.
Through innovation and a commitment to delivering solutions that address grid-resilience and drive system change, we support the global drive to net-zero, helping to future-proof critical infrastructure.
Installed in some of the world’s most demanding applications, our range of transformer solutions are designed and built by our engineering experts using quality materials to our exacting standards. The result is products that deliver on performance, reliability and efficiency – time after time.
Fully supported throughout their lifespan by our team of expert engineers, our designs abide by EU Regulation 548/2014 Tier 2, also known as EcoDesign Compliance, which legislates the efficiency of transformers.
The range includes power transformers, special transformers and reactors, as well as tapchangers.Working Hours :Monday – Thursday – 7:30am – 4pm and Friday – 7:30am - 12:30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Creative....Read more...
Are you looking for a new Senior Optics Design Engineer career opportunity, that can offer remote working?
If you are, an exciting opportunity has arisen for a Senior Optics Design Engineer, remote working to join a global leading electronics company specialising in a range of niche markets.
Due to continued growth, they are seeking a Senior Optics Design Engineer who will have the opportunity to work on the development of a range of products including fibre optic components, high power optical amplifiers and optical transmitter sub-systems, with applications across multiple markets
The key responsibilities of this Senior Optics Design Engineer are:
Design and develop optical and laser components, modules and subsystems
Exploit fibre optic and opto-electronic components to develop cutting edge products
Active involvement in prototype build & test and NPI
Lens design and lens data documentation
Assembly process development
Key skills/experience for this Senior Optics Design Engineer job:
Degree or PhD in Engineering or Physics with Optics, Photonics or Fibre optics bias
Provable relevant experience within the optics/photonics industry
Commercial experience in the product development of optoelectronics or laser products
Knowledge and experience in optical amplifiers, fibre-optics and photonics
Hands-on experience building and testing fibre-optic components or opto-electronic modules.
This is a great chance to join a global and industry leading company who can offer personal development & long-term career progression.
To apply for Senior Optics Design Engineer, remote working, please send your CV to SKhuttan@redlinegroup.Com quoting SKK1167, or for more information please call Sophie on 01582 878817 / 07961 158586.....Read more...
An exciting opportunity for an Embedded Electronics Engineer to design embedded control and ground support systems for innovative propulsion technology in the space sector.
Key Responsibilities:
Design embedded systems for thrusters and support units
Develop and test prototype software and hardware
Collaborate with multidisciplinary teams to ensure integration and reliability
Document system requirements and testing procedures
Requirements:
Degree in Electronic Engineering (or three years of experience)
Strong circuit design, PCB layout, and hands-on testing skills
Proficiency in C++ and embedded system architectur
Experience with tools like KiCAD, Altium, or Eagle
RTOS experience (e.g. FreeRTOS)
Space or aerospace control systems experience
Passion for electronics and continuous learning....Read more...
An exciting opportunity for an Embedded Electronics Engineer to design embedded control and ground support systems for innovative propulsion technology in the space sector.
Key Responsibilities:
Design embedded systems for thrusters and support units
Develop and test prototype software and hardware
Collaborate with multidisciplinary teams to ensure integration and reliability
Document system requirements and testing procedures
Requirements:
Degree in Electronic Engineering (or three years of experience)
Strong circuit design, PCB layout, and hands-on testing skills
Proficiency in C++ and embedded system architectur
Experience with tools like KiCAD, Altium, or Eagle
RTOS experience (e.g. FreeRTOS)
Space or aerospace control systems experience
Passion for electronics and continuous learning....Read more...
PCB Layout Engineer - Altium
A fantastic opening is available for a skilled PCB Layout Engineer - Altium to become part of a renowned organisation involved in the design, development, and production of advanced electronic systems. This role, located in Ipswich, Suffolk, presents an excellent opportunity to contribute to cutting-edge projects spanning multiple sectors, with a particular emphasis on embedded electronics solutions based on microcontrollers.
In this role, you will play a key role within the engineering team, taking charge of producing and refining PCB layouts in line with client requirements and established industry regulations.
The PCB Layout Engineer - Altium based in Ipswich, Suffolk will be responsible for:
Produce top-quality PCB layouts utilising software such as Altium Designer
Develop designs for single-layer, multi-layer, and flexible PCBs
Translate electrical schematics into efficient and well-structured PCB layouts
Refine component placement and routing to enhance performance, ease of manufacture, and test procedures
Guarantee all PCB designs adhere to EMC regulations and are aligned with manufacturing requirements
The successful applicant for the PCB Layout Engineer – Altium job in Ipswich, Suffolk:
Extensive experience in designing PCB layouts across single-layer, double-layer, and multi-layer boards
Skilled in using Altium Designer for schematic development and PCB layout
In-depth knowledge of DFM principles and electromagnetic compatibility (EMC) standards
Proficient in working with both surface-mount and through-hole component technologies
To apply for this role please send your CV to NDrain@redlinegroup.Com or call Nick on 07487756328/01582878828....Read more...
Mechanical Engineer – Fluidic Systems
Newton Colmore is working with a leading technology innovator in Cambridge, and we are looking for a mechanical engineer who understands fluidics, thermodynamics and heat transfer.
This exciting new role will give the Mechanical Engineer an excellent opportunity to work on novel products that span multiple industrial applications.
You will hold responsibility for the design and development of new ideas, from initial concept through to manufacture. You will be evaluating new ideas using evidence from modelling or experimentally obtained evidence and will be working on system and component-level elements. You will then test and verify your ideas and work closely with the manufacturing team to ensure manufacturability throughout every step of the design process.
You will be brining with you a passion for mechanical engineering and solving problems, coupled with strong academics. A detailed understanding of using maths and physics within the fields of fluidics and thermodynamics is vitally important for this position.
The company are offering tailored packages for the right engineer, which includes a performance bonus, free lunches, and market leading pension plan. They can also offer you career progression and foster an environment that encourages collaboration, learning and self-development.
If you would like to find out more about this opportunity than go ahead and make an application and a member of our team will be in touch to talk through the role further. This role is being managed by Matt Lowdon who is one of the directors at Newton Colmore.
Newton Colmore is a specialist recruitment and growth consultancy dedicated to the medical devices and biotechnology sectors.....Read more...
QA Engineer - World’s First Marketplace For Live Experiences - Bristol
(Tech stack: QA Engineer, Automated, UAT, Selenium, Playwright, ISEB, ISTQB, Test Analyst, Tester, Quality Assurance, QA Engineer)Be the first of your friends to declare, “I love where I work!” and actually mean it. Laugh hard and work hard with some of the best and brightest in the tech industry. Our client has created the world’s first marketplace for live experiences by developing the technology that lets anyone create, share and find new things to do. Currently 180 countries host events using their platform, with over 1.5 million events taking place every year and 5 million tickets being processed every month!
They are looking for QA Engineer (Automated, UAT, Selenium, Playwright) to help them dramatically expand and improve their set of products while simultaneously supporting a massive increase in the capacity of their systems. The ideal QA Engineer candidates will have experience in some or all of the following (full training will be provided to fill any gaps in your skill set): automated testing, UAT (User Acceptance), Selenium, Playwright, web-based testing, browser DevTools, Agile, JavaScript, CSS3, HTML5, Jira, .NET, C#. An ISEB or ISTQB or equivalent qualification is preferred.
Their benefits include the following:
Bonus (15%).
Generous stock option plan.
Medical, dental and vision insurance.
Company pension.
Choice of computer and gear.
All the coffee delivered to your desk you can order!
Snack filled kitchen.
Awesome work environment at a company with a huge vision.
Killer office with an onsite gym and games room!
Location: Bristol, UK / Remote Working
Salary: £30,000 - £35,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
NOIRUKTECHRECNOIRUKREC....Read more...
The Redline Group are seeking an experienced Contract FPGA Design Engineer – Lattice to work with our Cambridgeshire based customer on an exciting new conceptual venture. This role is based on site and could open up potential long-term work.
A well-established business in their industry, our customer seeks to continually challenge what is possible in product development, always looking at new methods and ideas to help their customers realise their ambition. This role taps into that conceptual thinking, asking engineers to try to find a reality to the theory. If you are used to working in this environment, this could be a fantastic role for you.
The development focuses on using FPGAs to control the technology and respond to commands in real-time, operating faster and ultimately more efficiently.
Key Skills Required – Contract FPGA Design Engineer – Lattice, Cambridgeshire:
- Proven experience of FPGA Design using Lattice FPGAs
- Experience of writing code in VHDL
- Experience of using test benches and performing simulations
Those who have experience in the life sciences/physics background would be of particular interest.
This role will not accept candidates operating via a PSC; you will therefore need to operate via an Umbrella company.
For more information or to apply for the Contract FPGA Design Engineer – Lattice role in Cambridgeshire, please contact Maddie Ramsden – Mramsden@redlinegroup.Com quoting reference MMR1043....Read more...
Recruit4staff is proud to be representing their client, a leading manufacturing company in their search for an Electrical Maintenance Engineer to work in their leading facility in TelfordFor the successful Electrical Maintenance Engineer our client is offering;
Salary of £46,181 per annum4 week rotational shift pattern (Days & Nights), 12 hour shifts (8am - 8pm/8pm - 8am)Permanent roleCanteen facilities on siteFree parking6.6 weeks annual leave
The Role of the Electrical Maintenance Engineer;
Maintain all machinery to provide optimum functionalityAttend breakdowns and diagnose and repair equipment using the appropriate test equipment and tools.Ensure all electrical maintenance tasks are completed on time in full.Conducting all planned preventative maintenance including implementing and developing new processes to resolve maintenance faults, repeat issues and inefficiencies in a continuous improvement environmentUsing a CMMS system for the maintenance of stock levels and work orderThere is also a 5 week cover period, which is taken in turns with all 5 shift Electricians and potentially gives you two lots of this during a full year.
What our client is looking for in an Electrical Maintenance Engineer;
Proven experience working in an electrical manufacturing environment - ESSENTIALHigher diploma/NVQ electrical qualification - ESSENTIAL17th or 18th Edition certificate - ESSENTIALAbility to identify root cause quickly and effectivelyAbility and experience interpreting technical drawings- ESSENTIAL H&S qualified – IOSH / NEBOSH- DESIRABLE FLT licence- DESIRABLEIPAF certificate- DESIRABLE
Alternative job titles;Electrical Maintenance Engineer, Maintenance Engineer, Maintenance Technician, Shift Engineer, Shift Maintenance Engineer, Electrical maintenance technician, Electrical EngineerCommutable From;Telford, Wolverhampton, Shrewsbury, Cannock, Bridgnorth, Dudley, Newport, Market Drayton, StaffordFor further information about this and other positions please apply now This vacancy is being advertised on behalf of Recruit4staff Wrexham Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business.....Read more...
.NET Software Engineer - Revolutionary Marketing Software Platform – Lausanne, Switzerland
(Tech stack: .NET Software Engineer, .NET 9, C#, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
Since 2006 our client’s revolutionary marketing software platform has been helping businesses all over the world to attract, engage, and delight customers by delivering inbound experiences that are relevant, helpful, and personalized. Having recently launched in Switzerland, they looking to hire .NET Software Engineer (ASP.NET, C#) to become a part of their ever-growing family.
They believe that individual .NET Software Engineer are in the best position to make decisions about what should be created, and how it should be built. Within their setup those decisions are made by small teams of three or four .NET Software Engineer who own each piece of their product. This autonomy allows them to deploy 200+ times each day. They believe that problems are solved with technology and experience, not process, and that mistakes are a normal part of learning.
.NET Software Engineer applicants should be experienced in: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. You will receive training in all aspects of: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, Azure SQL and MongoDB.
Their benefits include the following:
Bonus (12%).
Stock options.
CHF 7.000 training allowance.
Unlimited holiday allowance.
Free books and beers, and a 24/7 snack wall!
Our client is building a company that people love. A company that will stand the test of time. So they invest in their people, and optimize for your long term happiness. If you would like to explore the possibility of joining their family can you please send your CV.
Location: Lausanne, Switzerland / Remote Working
Salary: CHF 115.000 – CHF 130.000 + Bonus + Benefits
Applicants must be based in Switzerland and have the right to work in Switzerland even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRSWITZERLANDRECSP2NOIRSWITZERLANDRECNOIREUROPEREC
NC/BK/LAU115130....Read more...
.NET Software Engineer - Marketing Platform – Bochum, Germany
(Tech stack: .NET Software Engineer, .NET 9, C#, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
Since 2006 our client’s revolutionary marketing software platform has been helping businesses all over the world to attract, engage, and delight customers by delivering inbound experiences that are relevant, helpful, and personalized. Having recently launched in the Berlin, Germany, they looking to hire .NET Software Engineer (ASP.NET, C#) to become a part of their ever-growing family.
They believe that individual .NET Software Engineer are in the best position to make decisions about what should be created, and how it should be built. Within their setup those decisions are made by small teams of three or four .NET Software Engineer who own each piece of their product. This autonomy allows them to deploy 200+ times each day. They believe that problems are solved with technology and experience, not process, and that mistakes are a normal part of learning.
.NET Software Engineer applicants should be experienced in: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. You will receive training in all aspects of: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, Azure SQL and MongoDB.
Their benefits include the following:
Bonus (12%).
Stock options.
€7.000 training allowance.
Unlimited holiday allowance.
Free books and beers, and a 24/7 snack wall!
Our client is building a company people love. A company that will stand the test of time. So they invest in their people, and optimize for your long term happiness. If you would like to explore the possibility of joining their family, can you please send your CV.
Location: Bochum, Germany / Remote Working
Salary: €70.000 - €90.000 + Bonus + Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYRECSP1NOIRGERMANYRECNOIREUROPEREC
NC/BK/BOC7090....Read more...
Trainee Field Technician
Structural Column Testing
Depot based in Derby DE24 8EB
UK-Wide Field-based role involving weekly overnight stays
Starting salary up to £28,000 per annum
Extensive Training Opportunities, Holiday, Pension
Do you have experience operating plant machinery or groundwork and are keen to develop your skills further in a niche industry? If the answer is yes then please read on
Precision is excited to partner with a market leader in structural light testing as they grow their team in the Derby area. With a full order book and plans for continued success and growth, this is a fantastic opportunity for the right individual. They are currently seeking a Trainee Field Technician, who is enthusiastic to learn structural testing. The depot is easily accessible from Derby, Castle Donington and surrounding areas.
The Role: Trainee Test Technician:
- To carry out Structural Testing and Analysis of Lighting Columns throughout the UK for local councils, highways and the rail network.
- Undertaking the structural testing of lampposts using machinery and test equipment (Digger/cherry picker type arms)
- Working in small teams (typically 2)
- Expensed overnight stays (Monday to Thursday) with an early return Friday on a weekly basis.
- Learning Force Deflection, Ultrasonic and Eddy Wave Current technology
- Using calculation Software
- Understanding the principals of the force deflection test
- Tacho Discipline
- Providing weekly reports and vehicle check forms
- Understanding Health & Safety Initiatives
- Early starts and driving to the test location on a Monday morning
- Setting up and liaising with contractors and clients on-site
- Reporting and record keeping
- Ensuring the security of machinery, vehicles and test equipment
- Occasional nights/weekend work is required.
Minimum Skills / Experience Required - Trainee Test Technician:
- MUST hold a full, clean UK driving licence (class B+E desirable)
- Have previous experience of operating machinery such as a cherry picker, digger, JCB, scissor lift or forklift
- Prior experience in groundwork, highway maintenance, construction labouring, civil engineering or structural mechanics
- Competent with Excel to use the test software and create simple reports
- MUST be happy to stay away from home Monday-Friday
- Happy to be working outside in all weather conditions
- Live within 30 minutes of the Derby area
- Be willing to start early when the role requires
- Have a strong work ethic and commitment
The Package/Benefits - Trainee Field Technician:
- Starting salary £28,000 per annum
- Daily expenses are provided along with hotels for overnight stays
- Monday-Friday shifts (days and sometimes nights)
- Competitive night shift bonus (OTE £35k with bonuses)
- Internal bonus progression within the first year
- Company pension scheme
- 31 days holidays (including bank holidays)
- Internal courses Manual Handling: First Aid, G39, Sign Lighting & Guarding, 360 Degree Operation of Tracked Vehicle, HERS Accreditation Portfolio Courses.
Interested? To apply for this Trainee Field Engineer position, here are your two options:
- "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Emma Gilmore on 0116 4786971 between 7.30am - 4.30pm.
- "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know - emmag@precisionrecruitment.co.uk
PPDEL....Read more...
Recruit4staff is proud to be representing their client, a leading Food Manufacturer in their search for a Mechanical Maintenance Engineer in Settle For the successful Mechanical Maintenance Engineer our client is offering:
Salary of up to £48,000 per annum (Depending on skillset + experience)Rotating shifts including Earlies (6 am-6 pm), Nights (6 pm-6 am) and short days (8.5 hours)Permanent role with a progressive company Employer pension matched up to 6%24 days Holidayx4 annual salary life assurance coverStrong career development & trainingGenerous benefits package
The role – Mechanical Maintenance Engineer:
To diagnose faults and to test, repair, and maintain equipment, including Milk pasteurisation, homogenisers, filers, bottle labellers, cappers, packers, blow moulding machines, weighers, flow wrappers, shrink wrappers, and trolley packersEnsures own activities are aligned to overall business objectives and knows how current performance impacts the bottom lineAnalyse trends in recurring faults and breakdowns, and reduce the downtime of current equipment Responsible for equipment performance and reliability All functions to be carried out in accordance with ISO 9001:2000 quality management standard
What our client is looking for in a Mechanical Maintenance Engineer:
Qualified to ONC/NVQ level 3 or equivalent as a minimum in an engineering discipline - ESSENTIALExperience in mechanical maintenance within a fast-paced production or packaging environment - ESSENTIALMust be an effective communicator with strong people skills Ability to work in a small multi-skilled team across all facility areas and all types of work.Experience with fast-moving machinery including pumps, valves, motors, inverter drives, sensors, relays, PLCs, site services systems (steam generation plant, chilled water systems, compressors, processes) - DESIRABLEComputer literate – SAP, Microsoft Office, SCADA, Trend systems
Key skills or similar Job titles: Mechanical Technician, Multi-Skilled Engineer, Engineer, Technician, Mechanical Engineer, Electrical Engineer, Maintenance Engineer, Multi-Skilled Maintenance Engineer Commutable From: Lancaster, Burnley, Clitheroe, Buckden, Blackburn For further information about this and other positions please apply now This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business.....Read more...
Senior .NET Software Engineer
(Tech stack: .NET Software Engineer, .NET 9, C#, Azure, Docker, REST, MongoDB, React, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
Since 2006 our client’s revolutionary marketing software platform has been helping businesses all over the world to attract, engage, and delight customers by delivering inbound experiences that are relevant, helpful, and personalized. Having recently launched in the Cologne, Germany, they looking to hire a Senior .NET Software Engineer to become a part of their ever-growing family.
Senior .NET Software Engineer applicants should be experienced in: .NET, .NET Core / ASP.NET MVC, C#, REST, Azure, Docker React and MongoDB. You will receive training in all aspects of: .NET 9, REST, MongoDB, React Azure and Docker.
At the centre of our client’s culture is freedom and openness which takes a lot of people by surprise. But the good kind of surprise, like a birthday party!
Their benefits include the following:
Bonus
€3.000 training allowance.
Free books and beers, and a 24/7 snack wall!
Our client is building a company people love. A company that will stand the test of time. So they invest in their people, and optimize for your long term happiness. If you would like to explore the possibility of joining their family can you please send your CV.
Location: Cologne, Germany / Remote Working
Salary: €65.000 - €80.000 + Bonus + Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYREC
NOIREUROPEREC
NOIREURNET
NC/SM/COL6580....Read more...
Electronics and Embedded Systems Engineer - Engineering Company – Wokingham, Berkshire
(Tech stack: Electronics and Embedded Systems Engineer, Electronics and Embedded Systems Engineer, Developer, Architect, Electronics and Embedded Systems Engineer)
Are you ready to be part of a company that is shaping the future of high-performance electronic systems? Our client is a global engineering leader with over 10,000 employees worldwide, delivering cutting-edge technology solutions across industries including aerospace, automotive, industrial automation and renewable energy. With a strong presence in Europe, North America and Asia, they combine the agility of a fast-growing business with the stability of a well-established global enterprise. Known for their commitment to innovation, technical excellence and sustainable engineering, this company offers a collaborative and empowering environment where engineers are encouraged to innovate, develop and lead meaningful projects on a global scale.
Due to continued growth and expansion we are seeking several Electronics and Embedded Systems Engineer to join their dynamic team of high flying individuals. Electronics and Embedded Systems Engineer applicants should be experienced in some or all of the following (full training will be provided to fill any gaps in your skill set): analog circuit design (AC and DC), digital circuit design, PC software (C++), firmware for embedded micro controllers, PLC coding (Ladder) and standard electronic test equipment (Oscilloscope, multimeter, frequency generator, calibrators etc).
The positions come with an exceptional package designed to reward, support and inspire:
Bonus scheme (15%).
Company pension.
Remote and flexible working.
30 days holiday.
Private health insurance.
Dedicated budget and time for training, certifications and attending industry events and conferences.
Opportunities to collaborate with and travel to international offices across Europe, North America and Asia.
This is a truly fabulous opportunity to join a spectacular organization; one that offers a structured career progression programme, excellent training, exquisite offices and amazing benefits.
Location: Wokingham, Berkshire, UK / Remote Working
Salary: £30,000 - £60,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
NOIRUKTECHRECNOIRUKREC....Read more...
