Property maintenance operatives conduct routine maintenance tasks, and minor planned and responsive repair works, using a broad range of fundamental trade skills including carpentry, joinery, plumbing, plastering, brick and block work, external works and associated finishing trades including tiling, painting, and decorating.
Operatives use a wide variety of hand and power tools, materials, components, fixtures and fittings, ensuring work that is carried out is compliant with health and safety requirements, and meets building safety regulations and legislation.
In their daily work, an employee in this occupation interacts with other maintenance staff, specialist trades people, landlords and property owners, and the staff that work within or the residents that occupy buildings. Property Maintenance Operatives assist in the location of the repair works to be carried out, and to obtain further information and clarification as required from the customer, using a range of information gathering and communication techniques, whilst recording and reporting information in a variety of ways, including using digital technologies. Whilst much of the time may be working inside properties, operatives will be regularly required to work outside, conducting maintenance and repairs to properties, including to external drainage, brick and blockwork, glazing, fencing and groundworks.
Training:All training will be delivered by Greenlight Training on our premises. You'll be working towards a Level 2 Property Maintenance Operative apprenticeship standard, including Functional Skills if required.Training Outcome:
A possible full time postion with ongoing training for the right candidate.
Employer Description:Greenlight is the largest independently-owned Construction Apprenticeship provider, Safety Training and Consultancy company in the West and South West of EnglandWorking Hours :Monday to Friday 8am to 4.30pmSkills: Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative,Patience,Physical fitness....Read more...
· Speaking with candidates to discuss their experiences and abilities
· Speaking to clients to establish what their needs are
· Arranging placements for Trades and Labour candidates
· Beating the boss in a round of darts
· Spinning the wheel to win prizes based off performance
· Creating job adverts
· Learning and training to understand your market and become an expert!
We have all the tools required to run a lucrative desk, reporting into experienced and successful consultants who will help you on your journey.Training:- Lessons fully remote on TEAMS at the wotk pleacr during working hours
- Coursework is completed at the work pleace during working hours.Training Outcome:Look to study a higher course in recruitment or progress within the company after the completion of the ApprenticeshipEmployer Description:Rogers McHugh are a dynamic Recruitment Company who specialise in the Construction and Facilities Management sectors throughout the UK. Formed in 2020 we have had a fantastic start to our journey, and we are now looking to add Trainee Consultants to our Trades and Labour division based out of our South Manchester office.Working Hours :Working hours are 8:00 – 17:00 Monday to Thursday and 8:00 – 16:00 Friday.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills,Team working,• A good phone manner,• Good organisational skills,• A competitive nature....Read more...
Electrical Shift Lead - Glasgow - Salary up to £44,000 DOE CBW have a new opportunity for an experienced Electrical Engineer to join a leading facilities provider on a large static site in Glasgow City Centre. You will be responsible for maintaining the operational reliability of plant and associated electrical systems, adhering to health and safety regulations, and ensuring that all quality assurance procedures are fully observed. This position is on a shift basis including days and nights. Key Responsibilities:Lead the engineering team during your shift, ensuring smooth operations and effective handovers.Carry out planned preventative maintenance (PPM) in accordance with schedules to maintain operational reliability.Respond promptly to electrically related reactive maintenance issues and help desk requests.Conduct technical surveys of plant and systems, reporting findings to the Engineering Shift Manager (ESM).Produce material lists and estimates for minor works as required.Ensure all maintenance activities comply with Health & Safety statutory requirements and Quality Assurance procedures.Supervise trades and coordinate team activities to ensure effective issue resolution and continuous improvement.Support ongoing training programs and assessments to develop team skills and meet service performance objectives.Person Specification:Fully electrically qualified: 18th Edition, NVQ/C&G Electrical Installations, AM2, and Electrical Apprenticeship.City & Guilds Parts 1 and 2 (Electrical Installation 2360) or recognised equivalent.I.E.E Registration (17th or 18th Edition) or recognised equivalent.Prior experience in HV systems and Uninterruptible Power Supply (UPS) operations.Experience with electrical installation work, testing, and inspection.Experience with Building Management Systems (BMS).Strong leadership and team management skills, capable of supervising trades and coordinating shift activities.Excellent electrical and mechanical knowledge, with the ability to complete PPMs and reactive works efficiently.Salary & Benefits:Salary up to £44,000 DOE25 days holiday including bank.Generous workplace pension scheme.Training, development & progression opportunities. ....Read more...
X2 Labour needed in Tunbridge Wells, UK ASAP START!📍 Location: Tunbridge Wells, UK📅 Start Date: 22nd October 2025 ⏳ Duration: Until Christmas period 12 Hour days 7am-7pm 1 1/2 hour break unpaid chance to work on weekends!
What you’ll be doing:General labour duties such as Cleaning of site, assiting trades men. Manual Handling Requirements:Valid CSCS cardFull PPEReliability and site experienceIf you’re available and ready to start, don’t miss this opportunity!Call me on 07494 498414 to apply today. ....Read more...
Are you an experienced MEP Project Manager seeking a new challenge? If you're looking for a role with great scope for progression this is certainly the one!Company Overview: The company is a leading player in the construction industry, known for delivering high-quality projects across London and the South East. With a focus on excellence, they are seeking an MEP Project Manager to contribute to their continued success.Job Overview: As the MEP Project Manager, you will play a pivotal role in estimating, pre-construction activities, and managing the full project life cycle. Reporting directly to the Directors, you will lead a talented team and collaborate with subcontractors to ensure the successful delivery of MEP projects. Additionally, this role presents a unique opportunity for career advancement, with the potential to grow into a General Manager role as part of the company's strategic leadership transition plan.Here's what you'll be doing:Estimate and Pre-construction: Collaborate on MEP trades estimation and pre-construction activities.Contract Review: Analyze Contract Documents and suggest modifications for MEP trades.Management of Employees and Subcontractors: Oversee project teams and MEP subcontractors from planning to project handover.CPM Scheduling: Develop detailed Critical Path Method (CPM) schedules for MEP installation activities.Material and Equipment Approval: Review and approve material and equipment for MEP systems.Here are the skills you'll need:Completed either a trade or technical apprenticeship with a building services bias.Achieved either a BTECH Level 3 / HNC and NVQ or equivalent.Experience in managing multiple subcontractors on small to medium-sized projects.Digitally capable with the ability to build lasting client relationships.Background in construction or project management.Here are the benefits of this job:Join a renowned company with a commitment to excellence.Lead and mentor a skilled team.A highly competitive salary open for negotiation based on experience.Opportunity for Career Growth: This role offers the potential for career progression into a General Manager role, aligning with the company's strategic leadership transition plan.Work Permissions: You must have the right to work in the United Kingdom. Visa sponsorship is not available at this time.....Read more...
Lead / Snr AV Installation Engineer - I have a new position for a leading AV Integrator London that specialise in the world of high end residential AV Installation. They are now looking for a true master in the fine art of custom av installation. You will need to have a min of 4 years experience in this specific AV market. The role will see you working on projects in London. The clients offer a good career and relevant AV training to further develop your skills and knowledge. As a lead engineer you will be expected to be a figure on site that can take control of other engineers and trades to make sure the project is delivered on time and on budget. You will have previous experience of the installation / configuration of Crestron and Lutron Lighting control systems. If you have the skills and experiences that fulfil the above then please send me your full CV asap.
AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEO BESPOKE CUSTOM INSTALL RACK BUILD CRESTRON DM NVX LUTRON CEDIA AUTOMATION RESIDENTIAL BESPOKE MDUs PROGRAMMING CONFIGURATION HOME NETWORK LONDON SURREY KENT....Read more...
Undertaking warehouse activities in a safe and efficient manner
Complete and follow processes from goods in, through picking and packing to dispatch
Maintain a tidy work area and help with building maintenance within and around the warehouse and loading bays
Enter details and maintain stock levels using IT skills
Work with others to deliver deadlines and targets
Training:
Level 2 Supply Chain Warehouse Operative qualification
Training will be delivered in the workplace
Training Outcome:Possibility of a permanent contract and the opportunity to look into further training in a wide range of trades such Gas, Plumbing, Renewable, Commercial and Electrics.Employer Description:Local company with over 25 years experience in Gas, Commercial, Renewable and Plumbing industry. Multiple depots across the midlands with over 170 staff.Working Hours :Monday - Friday, 7.45am - 4.45pm.Skills: IT skills,Number skills,Team working,Honesty,Hard working....Read more...
Write and post job adverts
Screen and short list candidate applications from our website, social media accounts and approved job boards
Communicate with candidates across all teams
Assist Consultants with candidate lead generation, client research and admin tasks
Learn the full recruitment process from start to finish
Training Outcome:There are progression opportunities available upon completion of this apprenticeship.Employer Description:With many years of trading as a specialist recruitment agency and business in a construction environment, there’s not a lot we don’t know about the trade and its anomalies. We provide a full recruitment practice, with very knowledgeable trades and labour teams based regionally. From skilled labour through to management and engineers, we have a wealth of experience in supplying a construction workforce.Working Hours :Monday to Friday, 8.00am to 5.00pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Logical,Team working,Creative,Initiative,Non judgemental....Read more...
Job Description:
Our client, a leading global financial services firm, is seeking an Operations Associate to join on a 12-month contingent assignment. This is an exciting opportunity to gain exposure to a fast-paced, dynamic environment supporting fixed income financing activities across EMEA.
The successful candidate will join a collaborative operations team responsible for supporting the credit repo trading desk. You’ll ensure trades are booked, instructed, and settled accurately and efficiently while maintaining exceptional service standards for clients and internal stakeholders.
Skills/Experience:
Experience within Securities Financing or Investment Operations is advantageous but not essential.
Background in middle office, trade support, settlements, or client service functions will be highly valued.
Strong problem-solving skills and attention to detail, with the ability to balance competing priorities in a deadline-driven environment.
Excellent stakeholder management and communication skills, with a team-oriented working style.
An interest in process improvement and technology-driven efficiency would be beneficial.
Core Responsibilities:
Pre-match and affirm trades using vendor tools, liaising directly with clients to ensure timely matching.
Manage and resolve trade fails, including reconciliation of unmatched transactions, working closely with clients and internal stakeholders to achieve swift resolution.
Partner with clients, traders, and operations colleagues to investigate and resolve matching issues.
Provide support to the trading desk on high-priority settlement issues that may have P&L impact.
Monitor risk and recall processes, escalating potential buy-in risks as required.
Identify process improvements and efficiency opportunities, including automation initiatives.
Track and monitor key performance and risk indicators to maintain operational standards.
Core-Asset Consulting is an equal opportunities recruiter and we welcome applications from everyone irrespective of age, disability, gender, gender identity or expression, race, colour, ethnic or national origin, sexual orientation, religion or belief, marital/civil partner status or pregnancy.
Job reference: 16270
To apply for this vacancy applicants must be eligible to work in the UK in accordance with the Immigration, Asylum and Nationality Act 2006.
At Core-Asset, we’re committed to protecting and respecting your privacy. Our privacy statement explains when and why we collect personal information about people who engage with our services, how we use it, the conditions under which we may disclose it to others, and how we keep it secure. We may change this policy from time to time, so please check this policy occasionally to ensure that you’re happy with any changes.
By engaging with us (either by applying for a job we’re advertising, registering through our website, or getting in touch with our business) you’re agreeing to be bound by this policy.
Core-Asset Consulting is committed to protecting the privacy of our candidates, clients and website users. For further information, please refer to our full Privacy Statement available on our website http://www.core-asset.co.uk/about-core-asset/privacy-statement
Core-Asset Consulting offers specialist recruitment services to asset management, accounting & finance, asset servicing, legal and the wider financial services sector in Scotland.
INDCAS....Read more...
Lead AV Installation Engineer / Lutron Programmer - I have a new position for a leading light in London that specialise in the world of high end residential AV Installation. They are now looking for a true master in the fine art of custom av installation. You will need to have a min of 4 years experience in this specific AV market. The role will see you working on projects in London and the surrounding home counties. The clients offer a good career and relevant AV training to further develop your skills and knowledge. As a lead engineer you will be expected to be a figure on site that can take control of other engineers and trades to make sure the project is delivered on time and on budget. You will have previous experience of the installation / configuration / commissioning of Crestron or Control4 or Savant AV control systems. If you have the skills and experiences that fulfil the above then please send me your full CV asap.
AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEO CRESTRON DM NVX LUTRON CONTROL4 CEDIA SAVANT AUTOMATION RESIDENTIAL BESPOKE MDUs PROGRAMMING CONFIGURATION HOME NETWORK LONDON SURREY KENT SUSSEX....Read more...
Your tasks will include but not limited to:
Mixing Mortar
Laying bricks and blocks
Working to specifications
Working on construction sites and domestic homes
Follow Health and Safety policy and procedures, including the wearing of personal protective equipment (PPE) where needed
Liaise with other construction trades
Training:The qualification that will be achieved upon completion is the Bricklaying Apprenticeship Level 2.
Successful applicant must attend Leicester College Freemen's Park Campus on a block week schedule.Training Outcome:
The potential of being kept on as a full-time employee for the right candidate
Employer Description:Small family-run construction contractor that builds extensions, completes renovations and carries out general building work. A supportive company for an individual looking to gain skills and knowledge to become a qualified bricklayer.Working Hours :Monday to Friday 8am to 4pm, may work evenings and weekendsSkills: Communication skills,Attention to detail,Problem solving skills,Team working,Physical fitness....Read more...
You’ll be part of a supportive team, collaborating with other trades on a variety of projects.
What You’ll Learn:
Using spirit levels and plumb lines to check alignment Shaping and trimming bricks and blocks with hand tools
Preparing and applying mortar with trowels Installing damp-proof materials to meet design specs
Following Health & Safety regulations Supporting sustainability through waste and recycling practices
Training:
Bricklayer Apprenticeship
Training Outcome:
On successful completion of the apprenticeship, you may be offered a full time position with the employer
The opportunity to progress onto Gang Leader / Site Supervisor
Employer Description:Poplars Construction Ltd is a trusted name in multi-dwelling projects, offering expert services from groundworks to specialist joinery and decorating. Established in 2015, we’ve expanded across the Southern Midlands, Eastern Counties, and London, delivering quality work backed by industry accreditations like CHAS, SMAS, and Constructionline.Working Hours :Monday- Friday- 07.30- 16:00Skills: Team player,goal-driven,motivated,trustworthy,reliable,independent worker,common sense,bricklaying interest,industry passion,good with hands.....Read more...
Lead AV Installation Engineer / Lutron Programmer - I have a new position for a leading light in London that specialise in the world of high end residential AV Installation. They are now looking for a true master in the fine art of custom av installation. You will need to have a min of 4 years experience in this specific AV market. The role will see you working on projects in London and the surrounding home counties. The clients offer a good career and relevant AV training to further develop your skills and knowledge. As a lead engineer you will be expected to be a figure on site that can take control of other engineers and trades to make sure the project is delivered on time and on budget. You will have previous experience of the installation / configuration / commissioning of Crestron or Control4 or Savant AV control systems. If you have the skills and experiences that fulfil the above then please send me your full CV asap.
AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEO CRESTRON DM NVX LUTRON CONTROL4 CEDIA SAVANT AUTOMATION RESIDENTIAL BESPOKE MDUs PROGRAMMING CONFIGURATION HOME NETWORK LONDON ....Read more...
Read and understand drawings and specifications
Install metalwork for partitions and ceilings
Use of the correct plasterboard for wall or ceiling
Use of power tools, IE screw guns, hammer drills, chopsaws, lasers
Cutting plasterboard to correct sizes
Understand method statements and Risk assessments
Mix jointing powders to correct consistency and applying jointing materials on walls
Install corner beads correctly
Training Outcome:On completion of this, the opportunity of employment with a contractor as an improver if the candidate has progressed and can demonstrate the required skills.Employer Description:Joe Brennan Training was founded by Joe Brennan who has extensive experience of developing and delivering construction employment programmes on large new build housing contracts. Joe delivered the successful Ambition Construction programme for Carillion in partnership with JCP before moving on to the management of Notting Hill Housing’s Construction Training Initiative. During his time there the number of apprentices recruited and placement opportunities were trebled, whilst consistently achieving a 70% success rate of completers into sustainable jobs. Joe’s proven track record in this area demonstrates his passion for creating and achieving jobs for newly qualified trades people in the industry.Working Hours :Monday to Friday, 8am to 5pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative,Physical fitness,Dexterous,Strong work ethic....Read more...
Assisting in the assembly, wiring and testing of electrical systems
Reading and interpreting technical drawings and wiring diagrams
Carrying out basic electrical installations, maintenance, and fault-finding
Using hand tools and electrical testing equipment
Following health and safety procedures at all times
Training:
Installation and Maintenance Electrician Level 3 Apprenticeship Standard
Training Outcome:
On completion of this apprenticeship, the opportunity of employment with a contractor as an improver if the candidate has progressed and can demonstrate the required skills
Employer Description:Joe Brennan Training was founded by Joe Brennan who has extensive experience of developing and delivering construction employment programmes on large new build housing contracts.
Joe delivered the successful Ambition Construction programme for Carillion in partnership with JCP before moving on to the management of Notting Hill Housing’s Construction Training Initiative. During his time there the number of apprentices recruited and placement opportunities were trebled, whilst consistently achieving a 70% success rate of completers into sustainable jobs.
Joe’s proven track record in this area demonstrates his passion for creating and achieving jobs for newly qualified trades people in the industry.Working Hours :Monday - Friday, 8.00am - 5.00pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working,Initiative,Patience,Physical fitness,Dexterous....Read more...
An opportunity has arisen for a Domestic Gas Engineer to join a well-established heating and plumbing company providing expert boiler, heating, and plumbing solutions known for reliability and top-rated customer service.
As a Domestic Gas Engineer, you will be responsible for the installation, servicing, and maintenance of heating and plumbing systems across a variety of properties.
This is a full-time permanent role offering a salary range of £40,000 - £42,250 and benefits.
Immediate start with 3-month trial period.
You will be responsible for:
? Installing, maintaining, and repairing heating systems within residential and commercial environments.
? Carrying out routine servicing, boiler checks, and safety inspections to ensure compliance with industry standards.
? Diagnosing and resolving faults in heating and plumbing systems efficiently.
? Undertaking pipework, assembly, welding, and system installations using appropriate hand and power tools.
? Completing relevant documentation and maintaining accurate records of all work undertaken.
? Collaborating with other trades when required to deliver quality installations.
? Ensuring all activities are performed safely and in accordance with health and safety regulations.
What We Are Looking For
? Previously worked as a Domestic Gas Engineer, Gas Engineer, Heating Engineer, Gas Service Engineer, Boiler Engineer, Boiler Service Engineer, Gas Installation Engineer, Gas Safe Engineer, Plumbing Engineer, Gas Appliance Engineer or in a similar role.
? Proven experience of 4 years in plumbing and heating services, including boiler and full central heating systems installations.
? Fully qualified Heating Engineer or Plumber with recognised industry certifications such as NVQ, SNVQ, or City & Guilds.
? Current ACS accreditation (e.g. CCN1, CEN1, WAT1, HTR1, CKR1, CPA1).
? Competent in all aspects of plumbing and skilled in using relevant hand tools and power tools.
? Mechanical knowledge with....Read more...
An opportunity has arisen for aHeating Engineer to join a well-established heating and plumbing company providing expert boiler, heating, and plumbing solutions known for reliability and top-rated customer service.
As aHeating Engineer, you will be responsible for the installation, servicing, and maintenance of heating and plumbing systems across a variety of properties.
This is a full-time permanent role offering a salary range of £40,000 - £42,250 and benefits.
Immediate start with 3-month trial period.
You will be responsible for:
? Installing, maintaining, and repairing heating systems within residential and commercial environments.
? Carrying out routine servicing, boiler checks, and safety inspections to ensure compliance with industry standards.
? Diagnosing and resolving faults in heating and plumbing systems efficiently.
? Undertaking pipework, assembly, welding, and system installations using appropriate hand and power tools.
? Completing relevant documentation and maintaining accurate records of all work undertaken.
? Collaborating with other trades when required to deliver quality installations.
? Ensuring all activities are performed safely and in accordance with health and safety regulations.
What We Are Looking For
? Previously worked as a Domestic Gas Engineer, Gas Engineer, Heating Engineer, Gas Service Engineer, Boiler Engineer, Boiler Service Engineer, Gas Installation Engineer, Gas Safe Engineer, Plumbing Engineer, Gas Appliance Engineer or in a similar role.
? Proven experience of 4 years in plumbing and heating services, including boiler and full central heating systems installations.
? Fully qualified Heating Engineer or Plumber with recognised industry certifications such as NVQ, SNVQ, or City & Guilds.
? Current ACS accreditation (e.g. CCN1, CEN1, WAT1, HTR1, CKR1, CPA1).
? Competent in all aspects of plumbing and skilled in using relevant hand tools and power tools.
? Mechanical knowledge with experience ....Read more...
An opportunity has arisen for a Boiler Service and Installation Engineer to join a well-established heating and plumbing company providing expert boiler, heating, and plumbing solutions known for reliability and top-rated customer service.
As a Boiler Service and Installation Engineer, you will be responsible for the installation, servicing, and maintenance of heating and plumbing systems across a variety of properties.
This is a full-time permanent role offering a salary range of £40,000 - £42,250 and benefits.
Immediate start with 3-month trial period.
You will be responsible for:
? Installing, maintaining, and repairing heating systems within residential and commercial environments.
? Carrying out routine servicing, boiler checks, and safety inspections to ensure compliance with industry standards.
? Diagnosing and resolving faults in heating and plumbing systems efficiently.
? Undertaking pipework, assembly, welding, and system installations using appropriate hand and power tools.
? Completing relevant documentation and maintaining accurate records of all work undertaken.
? Collaborating with other trades when required to deliver quality installations.
? Ensuring all activities are performed safely and in accordance with health and safety regulations.
What We Are Looking For
? Previously worked as a Domestic Gas Engineer, Gas Engineer, Heating Engineer, Gas Service Engineer, Boiler Engineer, Boiler Service Engineer, Gas Installation Engineer, Gas Safe Engineer, Plumbing Engineer, Gas Appliance Engineer or in a similar role.
? Proven experience of 4 years in plumbing and heating services, including boiler and full central heating systems installations.
? Fully qualified Heating Engineer or Plumber with recognised industry certifications such as NVQ, SNVQ, or City & Guilds.
? Current ACS accreditation (e.g. CCN1, CEN1, WAT1, HTR1, CKR1, CPA1).
? Competent in all aspects of plumbing and skilled in using relevant hand tools and pow....Read more...
An opportunity has arisen for a Gas Service Engineer to join a well-established heating and plumbing company providing expert boiler, heating, and plumbing solutions known for reliability and top-rated customer service.
As a Gas Service Engineer, you will be responsible for the installation, servicing, and maintenance of heating and plumbing systems across a variety of properties.
This is a full-time permanent role offering a salary range of £40,000 - £42,250 and benefits.
Immediate start with 3-month trial period.
You will be responsible for:
? Installing, maintaining, and repairing heating systems within residential and commercial environments.
? Carrying out routine servicing, boiler checks, and safety inspections to ensure compliance with industry standards.
? Diagnosing and resolving faults in heating and plumbing systems efficiently.
? Undertaking pipework, assembly, welding, and system installations using appropriate hand and power tools.
? Completing relevant documentation and maintaining accurate records of all work undertaken.
? Collaborating with other trades when required to deliver quality installations.
? Ensuring all activities are performed safely and in accordance with health and safety regulations.
What We Are Looking For
? Previously worked as a Domestic Gas Engineer, Gas Engineer, Heating Engineer, Gas Service Engineer, Boiler Engineer, Boiler Service Engineer, Gas Installation Engineer, Gas Safe Engineer, Plumbing Engineer, Gas Appliance Engineer or in a similar role.
? Proven experience of 4 years in plumbing and heating services, including boiler and full central heating systems installations.
? Fully qualified Heating Engineer or Plumber with recognised industry certifications such as NVQ, SNVQ, or City & Guilds.
? Current ACS accreditation (e.g. CCN1, CEN1, WAT1, HTR1, CKR1, CPA1).
? Competent in all aspects of plumbing and skilled in using relevant hand tools and power tools.
? Mechanical knowledge with e....Read more...
An opportunity has arisen for a Plumbing and Heating Engineer to join a well-established heating and plumbing company providing expert boiler, heating, and plumbing solutions known for reliability and top-rated customer service.
As a Plumbing and Heating Engineer, you will be responsible for the installation, servicing, and maintenance of heating and plumbing systems across a variety of properties.
This is a full-time permanent role offering a salary range of £40,000 - £42,250 and benefits.
Immediate start with 3-month trial period.
You will be responsible for:
? Installing, maintaining, and repairing heating systems within residential and commercial environments.
? Carrying out routine servicing, boiler checks, and safety inspections to ensure compliance with industry standards.
? Diagnosing and resolving faults in heating and plumbing systems efficiently.
? Undertaking pipework, assembly, welding, and system installations using appropriate hand and power tools.
? Completing relevant documentation and maintaining accurate records of all work undertaken.
? Collaborating with other trades when required to deliver quality installations.
? Ensuring all activities are performed safely and in accordance with health and safety regulations.
What We Are Looking For
? Previously worked as a Domestic Gas Engineer, Gas Engineer, Heating Engineer, Gas Service Engineer, Boiler Engineer, Boiler Service Engineer, Gas Installation Engineer, Gas Safe Engineer, Plumbing Engineer, Gas Appliance Engineer or in a similar role.
? Proven experience of 4 years in plumbing and heating services, including boiler and full central heating systems installations.
? Fully qualified Heating Engineer or Plumber with recognised industry certifications such as NVQ, SNVQ, or City & Guilds.
? Current ACS accreditation (e.g. CCN1, CEN1, WAT1, HTR1, CKR1, CPA1).
? Competent in all aspects of plumbing and skilled in using relevant hand tools and power tools.
? Mechanica....Read more...
We are seeking a hands-on and multiskilled Foreman / Supervisor to oversee small teams and support site operations across multiple projects. The ideal candidate will have a strong background in general construction, groundwork, and plant operation, and be confident supervising 2-3 operatives on a range of sites.Location: Various sites located in London, Essex, and Rugby Salary: £50,000 per annum or £225 per day Start Date: In 2 weeks Hours: 07:30 - 16:30 Contract Type: Permanent Package: 20 days holiday plus bank holidays Parking: AvailableDuties and Responsibilities:
Oversee day-to-day operations on site, ensuring work is completed safely, efficiently, and to a high standard.
Work hands-on across various trades, including groundwork, rebar, and concrete.
Operate plant and machinery as needed, ensuring all activities comply with safety regulations.
Coordinate with project managers and clients to ensure progress aligns with schedules and project requirements.
Maintain records, monitor work quality, and lead by example to ensure productivity and safety on site.
Requirements:
Strong experience in groundwork, rebar, and general construction.
Ability to manage small teams effectively while remaining actively involved in site work.
Must be based near Hertford and have own transport to travel between sites.
Required Tickets:
CPCS 360 Excavator Operator
CPCS Forward Dumper Driver
CPCS Loading Shovel
CPCS Road Roller
CPCS Telehandler
CSCS Groundworks
Interested applicants are invited to apply by sending their most up-to-date CV.....Read more...
Fabric Engineer – FM Service Provider - Brand New Site - East London - up to £35,000 per annumExciting opportunity to work for an established FM service provider situated in East London, London. CBW is recruiting a Fabric Engineer to work at a newly built exhibition centre in East London. The successful candidate will have a strong understanding of most general fabric trades ideally with expereince in basic plumbing. In return, the company is offering a competitive salary of up to £35,000, overtime and further training. Package & Working hoursUp to £35,000Monday to Friday 08:00 am – 17:00 pm25 days holiday + Bank holidaysFurther trainingCompany pensionKey Duties & ResponsibilitiesGeneral fabric repairsFurniture moves porteragePainting & DecoratingBasic lightingFixing FurnitureHanging Pictures & ShelvesMaintain and update Log booksAssist the maintenance team on site e.g PPMs, fire alarm tests, tap temp checks, flushingEscort sub-contractorsTo undertake basic “Fabric duties” which would include touching up paintwork, tightening hinges, install/repair blinds, changing locks , making minor repairs to cabinets, desks, and putting together small equipment like chairs etc.RequirementsNVQ in a relevant trade - Pluming, Carpentry, Painting etc (Desirable)Knowledge of commercial building maintenanceAn understanding of most building fabric dutiesGood communication skillsHealth & Safety experienceBasic PC literacy, (Microsoft Word, Excel, Internet, smartphone use)Ability to deliver excellent customer serviceSelf-motivation with the ability to manage tight time constraints and prioritise workloadIf you are interested, please email your CV to Archie Reed of CBW Staffing Solutions....Read more...
Fabric Engineer – FM Service Provider - Historical Site - South Kensington - Up to £35,000 per annumExciting opportunity to work for an established FM service provider situated in South Kensington. CBW is recruiting a Fabric Engineer to work at a historical site in South Kensington. The successful candidate will have a strong understanding of most general fabric trades. In return, the company is offering a competitive salary of up to £35,000, overtime and further training. Package & Working hoursUp to £35,000Monday to Friday 08:00 am – 17:00 pm25 days holiday + Bank holidaysFurther trainingCompany pensionKey Duties & ResponsibilitiesGeneral fabric repairsFurniture moves porteragePainting & DecoratingBasic lightingFixing FurnitureHanging Pictures & ShelvesMaintain and update Log booksAssist the maintenance team on site e.g PPMs, fire alarm tests, tap temp checks, flushingEscort sub-contractorsTo undertake basic “Fabric duties” which would include touching up paintwork, tightening hinges, install/repair blinds, changing locks , making minor repairs to cabinets, desks, and putting together small equipment like chairs etc.RequirementsPainting & Decorating qualification or background (Desirable)Knowledge of commercial building maintenanceAn understanding of most building fabric dutiesGood communication skillsHealth & Safety experienceBasic PC literacy, (Microsoft Word, Excel, Internet, smartphone use)Ability to deliver excellent customer serviceSelf-motivation with the ability to manage tight time constraints and prioritise workloadIf you are interested, please email your CV to Archie Reed of CBW Staffing Solutions....Read more...
About the Drinks Dispense Technician Role:
You will install and maintain coffee and soft drink dispense equipment, visiting our customers within the leisure, catering, hospitality and licensed trades across South Yorkshire, Derbyshire, Nottinghamshire, Leicestershire and Lincolnshire.
Typical Activities:
Mainly field-based
Complete installations of hot and cold drink dispensing equipment
Deliver on-site training on how to operate and correctly maintain the safety and hygiene of the equipment
Respond to reported faults, diagnose and complete successful repairs
We work as a team and offer support to develop knowledge of the specific equipment we operate within our business.Training:Day release at Advanced Technology Centre, Olive Grove Road, Sheffield, S2 3BA. Training Outcome:Full-time employment upon satisfactory completion of the apprenticeship.Employer Description:Formed in 1977, Bebida Beverage Solutions Ltd is a family business currently employing 19 staff. Over the past 45 years, we have gained a formidable reputation for supplying high quality products and customer service within our marketplace.
We are proud to be a major partner within the Vimto Dispense network and to offer only the highest quality beverages. As well as collaborating with major brands such as Douwe Egberts - since 2014 we have also offered customers our own handcrafted coffee and have developed a recognisable brand for high quality speciality coffee, with a strong and unique character.
What makes Bebida Beverage Solutions stand out?
There are many providers of hot and cold drinks machines, products and services, but very few provide a complete in-house solution. Bebida source, install and maintain the most ideal dispense equipment and deliver the highest quality drinks for any environment. Our ISO 9001 certificate for quality assurance endorses the fact of our focus and commitment to total customer satisfaction.Working Hours :8:30-5:30 Monday – Friday.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
We are looking for a Digital Marketing Apprentice to promote our business, helping us with our business growth goals.
You will be managing our social media channels, and creating content for TikTok, LinkedIn, Facebook, Instagram and YouTube.
Using MailChimp, an email marketing platform, to drive sales and communicate with our customers.
Supporting the development of PPC campaigns
You will be updating, maintaining and improving our company websites and trade portals.
You will be launching media campaigns, promoting and producing creative content, including photos, videos, social media, blog posts and company newsletters.
Improving SEO of the website for maximum exposure online, meta tags, metadata, and keywords
Create and share reports on the impact of campaigns and work closely with our sales team
Undertake market and competitor research.
Seeking out new ideas and social media avenues
Organising and updating contact lists and similar data.
Developing content for external and internal distribution
Additional reasonable marketing support activities as and when required.
Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:We want to develop and maintain our apprentices with the business. At the end of the apprenticeship there will be the opportunity for your role to become permanent within the business and to play a key role to its continued success.Employer Description:Red Gorilla (Faulks & Cox Ltd) is a UK-based manufacturer and distributor of maintenance tools for the equestrian, building, and gardening trades, including their famous Gorilla Tubs® and Gorilla Brooms. While their products are sold globally, their registered office and headquarters are located at 21 Moat Way, Barwell. The company has been operating since 1987 and is known for producing a range of durable, versatile, and often brightly coloured plastic equipment.Working Hours :Mon – Fri 9 am-5 pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
