An exciting opportunity has arisen for a Sub Assembly Welder / MIG Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Sub Assembly Welder / MIG Welder, you will be performing MIG and TIG welding to produce components and assemblies to specification while supporting production targets and quality standards.
This full-time permanent role offers a salary of £13.20 per hour and benefits.
You Will Be Responsible For:
? Working safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
? Using MIG and/or TIG welding equipment to manufacture parts and assemblies as required.
? Preparing and setting up tools and equipment to support welding operations.
? Ensuring components are prepared correctly for welding.
? Monitoring quality, reporting non-conformance, and following corrective actions as needed.
? Supporting production processes and work order tracking via data capture and ERP systems.
? Suggesting improvements to quality and productivity as part of continuous improvement initiatives.
What We Are Looking For:
? Previously worked as a Sub Assembly Welder, MIG Welder, Fabricator Welder, Production Welder, Welder Fabricator, Welding Technician, TIG Welder or in a similar role.
? Practical experience with MIG welding, ideally with both MIG and TIG.
? Ability to work diligently with minimal supervision.
? Understanding of production schedules and process adherence.
? Eligibility to work in the United Kingdom.
What's on Offer:
? Competitive Salary.
? Company pension scheme.
? Life insurance and death in service benefit.
? Health and wellbeing programme.
? Generous holiday allowance including bank holidays.
? On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued. ....Read more...
An exciting opportunity has arisen for a Sub Assembly Welder / MIG Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Sub Assembly Welder / MIG Welder, you will be performing MIG and TIG welding to produce components and assemblies to specification while supporting production targets and quality standards.
This full-time permanent role offers a salary of £13.20 per hour and benefits.
You Will Be Responsible For:
? Working safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
? Using MIG and/or TIG welding equipment to manufacture parts and assemblies as required.
? Preparing and setting up tools and equipment to support welding operations.
? Ensuring components are prepared correctly for welding.
? Monitoring quality, reporting non-conformance, and following corrective actions as needed.
? Supporting production processes and work order tracking via data capture and ERP systems.
? Suggesting improvements to quality and productivity as part of continuous improvement initiatives.
What We Are Looking For:
? Previously worked as a Sub Assembly Welder, MIG Welder, Fabricator Welder, Production Welder, Welder Fabricator, Welding Technician, TIG Welder or in a similar role.
? Practical experience with MIG welding, ideally with both MIG and TIG.
? Ability to work diligently with minimal supervision.
? Understanding of production schedules and process adherence.
? Eligibility to work in the United Kingdom.
What's on Offer:
? Competitive Salary.
? Company pension scheme.
? Life insurance and death in service benefit.
? Health and wellbeing programme.
? Generous holiday allowance including bank holidays.
? On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued. ....Read more...
An exciting opportunity has arisen for a Final Assembly Welder / TIG Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Final Assembly Welder / TIG Welder, you will perform MIG and TIG welding to assemble components and complete final products according to specifications, ensuring production targets are met and quality standards are maintained.
This full-time permanent role offers a salary of £16.12 per hour and benefits.
You Will Be Responsible For:
? Operate MIG and/or TIG welding equipment to assemble final products and components to specification.
? Work safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
? Prepare and set up tools, jigs, and equipment to support welding and assembly operations.
? Ensure components and assemblies are correctly prepared and aligned for welding.
? Monitor quality, report any non-conformances, and follow corrective actions as required.
? Support production processes and work order tracking using data capture and ERP systems.
What We Are Looking For:
? Previously worked as a Final Assembly Welder, TIG Welder, Production Welder, MIG Welder, Fabrication Welder, Welding Technician, Welder or in a similar role.
? Practical experience with MIG and/or TIG welding.
? Ability to work diligently with minimal supervision.
? Understanding of production schedules and process adherence.
? Eligibility to work in the United Kingdom.
What's on Offer:
? Competitive Salary.
? Company pension scheme.
? Life insurance and death in service benefit.
? Health and wellbeing programme.
? Generous holiday allowance including bank holidays.
? On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to pro....Read more...
TIG Welder Fabricator
TIG Welder Fabricator Salary: £16-20ph
The Company
A long-standing and trusted business that specialises in working to very fine tolerances is looking for a well-accomplished TIG Welder Fabricator to join their team. Focusing on quality over quantity, possessing excellent attention to detail and having a steady hand are paramount to producing work to the high standard this company hold itself to, generating wave after wave of repeat business within an ever-growing area of the industry.
TIG Welder Fabricator Role & Responsibilities
- Confident working with materials as thin as 0.8mm
- A strong background in aerospace, defence or similar industry
- Being able to fabricate just as well as you can weld is essential
- Work from technical drawings
- Well-practiced with stainless steel and aluminium
- Brazing experience would be desirable
- Flexible working hours on offer
- Hourly salary on offer of £16-20ph
- The TIG Welder Fabricator role is a full-time, permanent position with flexible working hours available.
How to Apply for the TIG Welder Position
Apply now or call/message Hayden at Holt Engineering on 07955 081 482 for more information on the TIG Welder/Fabricator role.....Read more...
MIG Welder
Permanent or Contract Days, Earlies or Lates
Location: Near Ilkley, West Yorkshire
Salary: £15 21.90 (inc shift if applicable)
Shifts: Days / Earlies / Lates (4-day week available on lates)
MIG Welder Overview
Are you a MIG Welder with experience in fabrication and working to high levels of accuracy? We have multiple exciting opportunities for skilled MIG Welders to join a market-leading manufacturer with a strong order book and excellent working conditions.
Why join this company as a MIG Welder?
- Permanent positions or 6-month+ contracts (PAYE or umbrella)
- 25 days holiday + bank holidays
- 10% shift allowance (earlies), 25% (lates)
- 4-day week available on late shift, early finish Fridays on others
- Overtime at 1.5x
- Enhanced pension contributions
- Employee Assistance Programme
Role overview MIG Welder
As a MIG Welder, you will be working primarily with mild steel plate (3mm10mm), producing bespoke assemblies to tight tolerances using technical drawings.
MIG Welder Key Responsibilities:
- MIG welding and fabricating mild steel parts to specification
- Reading and interpreting detailed engineering drawings
- Inspecting work for accuracy, size, and finish
- Using cutting and hand tools as required
- Operating rolling and swaging machinery (training provided)
- Moving materials safely with overhead cranes and lifting equipment
Requirements for MIG Welders:
- Level 3 Apprenticeship or NVQ in Fabrication & Welding (or equivalent)
- Strong MIG welding experience in a manufacturing environment
- Confident with technical drawings and welding symbols
- Safety and quality conscious with attention to detail
We're looking for MIG Welders who take pride in their work and are either seeking a long-term position or a stable contract with full-time hours. Whether you're a permanent jobseeker or a contractor, we'd love to hear from you.
How to Apply for the MIG Welder Position
Apply now, or for more information, contact Hayden at Holt Engineering on 07955 081 482. Dont miss this opportunity to secure a rewarding role as a MIG Welder with a respected employer.....Read more...
An exciting opportunity has arisen for a Final Assembly Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Final Assembly Welder, you will perform MIG and TIG welding to assemble components and complete final products according to specifications, ensuring production targets are met and quality standards are maintained.
This full-time permanent role offers a salary of £16.12 per hour and benefits.
You Will Be Responsible For:
? Operate MIG and/or TIG welding equipment to assemble final products and components to specification.
? Work safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
? Prepare and set up tools, jigs, and equipment to support welding and assembly operations.
? Ensure components and assemblies are correctly prepared and aligned for welding.
? Monitor quality, report any non-conformances, and follow corrective actions as required.
? Support production processes and work order tracking using data capture and ERP systems.
What We Are Looking For:
? Previously worked as a Final Assembly Welder, MIG Welder, TIG Welder, Production Welder, Fabrication Welder, Welding Technician, Welder or in a similar role.
? Practical experience with MIG and/or TIG welding.
? Ability to work diligently with minimal supervision.
? Understanding of production schedules and process adherence.
? Eligibility to work in the United Kingdom.
What's on Offer:
? Competitive Salary.
? Company pension scheme.
? Life insurance and death in service benefit.
? Health and wellbeing programme.
? Generous holiday allowance including bank holidays.
? On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in....Read more...
An exciting opportunity has arisen for a Production Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Production Welder, you will be working on small component welding to support production and maintain the high-quality standards.
This full-time permanent role offers a salary of £13.20 per hour and benefits.
You Will Be Responsible For:
? Welding small components using MIG and/or TIG equipment according to defined procedures.
? Preparing and setting up tools and equipment for welding tasks.
? Ensuring parts are manufactured to specification and adhering to quality standards.
? Reporting any non-conformance and ensuring corrective actions are applied.
? Supporting production schedules and work orders, meeting output targets.
? Maintaining a clean and organised work area.
? Supporting continuous improvement initiatives by suggesting quality or productivity enhancements.
What We Are Looking For:
? Previously worked as a Production Welder, Sub Assembly Welder, MIG Welder, TIG Welder, Fabricator Welder, Welder Fabricator, Welding Technician or in a similar role.
? Practical experience with MIG and/or TIG welding at assembly level.
? Ideally have experience in automotive sector.
? Understanding of production schedules and process adherence.
? Eligibility to work in the United Kingdom.
What's on Offer:
? Competitive Salary.
? Company pension scheme.
? Life insurance and death in service benefit.
? Health and wellbeing programme.
? Generous holiday allowance including bank holidays.
? On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in ....Read more...
An opportunity has arisen for a Welder Fabricator to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Welder Fabricator, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
? Reading and interpreting 2D and 3D engineering drawings accurately.
? Measuring, marking, cutting, and bending materials to required dimensions.
? Assembling and welding fabricated parts to produce finished products.
? Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
? Conducting quality checks and completing relevant documentation.
? Adhering to all health and safety procedures within the workshop.
What we are looking for
? Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
? Have at least 3 years of fabrication experience
? Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
? Prior experience in MIG welding, ideally have experience in both TIG and MIG.
? Skilled in working with mild steel, galvanised, and Zintec sheet materials.
? Ability to read and interpret technical drawings (2D & 3D).
? Strong practical understanding of fabrication tools and processes.
? Good mathematical ability and attention to detail.
? Comfortable handling and moving heavy metal components.
Shift:
? Monday to Thursday: 7am to 4pm
? Friday: From 7am to 1pm
? Working hours: 40 per week
What's on offer
? Competitive salary
? Overtime opportunities.
? 31 days' holiday (including bank holidays), with additional en....Read more...
An opportunity has arisen for a Fabricator Welder to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Fabricator Welder, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
? Reading and interpreting 2D and 3D engineering drawings accurately.
? Measuring, marking, cutting, and bending materials to required dimensions.
? Assembling and welding fabricated parts to produce finished products.
? Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
? Conducting quality checks and completing relevant documentation.
? Adhering to all health and safety procedures within the workshop.
What we are looking for
? Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
? Have at least 3 years of fabrication experience
? Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
? Prior experience in MIG welding, ideally have experience in both TIG and MIG.
? Skilled in working with mild steel, galvanised, and Zintec sheet materials.
? Ability to read and interpret technical drawings (2D & 3D).
? Strong practical understanding of fabrication tools and processes.
? Good mathematical ability and attention to detail.
? Comfortable handling and moving heavy metal components.
Shift:
? Monday to Thursday: 7am to 4pm
? Friday: From 7am to 1pm
? Working hours: 40 per week
What's on offer
? Competitive salary
? Overtime opportunities.
? 31 days' holiday (including bank holidays), with additional en....Read more...
An opportunity has arisen for aMIG Welder to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a MIG Welder, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
? Reading and interpreting 2D and 3D engineering drawings accurately.
? Measuring, marking, cutting, and bending materials to required dimensions.
? Assembling and welding fabricated parts to produce finished products.
? Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
? Conducting quality checks and completing relevant documentation.
? Adhering to all health and safety procedures within the workshop.
What we are looking for
? Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
? Have at least 3 years of fabrication experience
? Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
? Prior experience in MIG welding, ideally have experience in both TIG and MIG.
? Skilled in working with mild steel, galvanised, and Zintec sheet materials.
? Ability to read and interpret technical drawings (2D & 3D).
? Strong practical understanding of fabrication tools and processes.
? Good mathematical ability and attention to detail.
? Comfortable handling and moving heavy metal components.
Shift:
? Monday to Thursday: 7am to 4pm
? Friday: From 7am to 1pm
? Working hours: 40 per week
What's on offer
? Competitive salary
? Overtime opportunities.
? 31 days' holiday (including bank holidays), with additional entitlement for l....Read more...
An exciting opportunity has arisen for a skilled Automotive Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As an Automotive Welder, you will play a key role in both sub-assembly and final assembly welding, producing high-quality components and full assemblies in line with production schedules and quality standards.
This is a full-time, permanent role, offering a competitive hourly rate between £13.20 and £16.12, depending on experience, along with excellent company benefits.
You Will Be Responsible For:
? Welding both small components and full assemblies using MIG and/or TIG equipment.
? Preparing and setting up tools, jigs, and equipment required for welding tasks.
? Ensuring all parts and assemblies meet defined quality standards and specifications.
? Reporting any non-conformance and implementing or supporting corrective actions.
? Following production plans and individual work orders to meet output targets.
? Maintaining a clean, tidy, and safe work area.
? Supporting and contributing to continuous improvement initiatives in quality and productivity.
What We Are Looking For:
? Previous experience as a Production Welder, Automotive Welder, Assembly Welder, MIG Welder, TIG Welder, Fabricator Welder, or in a similar welding role.
? Practical experience with MIG and/or TIG welding at component and/or assembly level.
? Strong understanding of production schedules, process adherence, and quality control.
? A proactive attitude toward maintaining high standards of workmanship and safety.
? Eligibility to work in the United Kingdom.
What's on Offer:
? Competitive Salary.
? Company pension scheme.
? Life insurance and death in service benefit.
? Health and wellbeing programme.
? Generous holiday allowance, including bank holidays.
? On-site parking.
This is a fantastic opportunity to....Read more...
An exciting opportunity has arisen for a Sub Assembly Welder / MIG Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Sub Assembly Welder / MIG Welder, you will be performing MIG and TIG welding to produce components and assemblies to specification while supporting production targets and quality standards.
This full-time permanent role offers a salary of £13.20 per hour and benefits.
You Will Be Responsible For:
* Working safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
* Using MIG and/or TIG welding equipment to manufacture parts and assemblies as required.
* Preparing and setting up tools and equipment to support welding operations.
* Ensuring components are prepared correctly for welding.
* Monitoring quality, reporting non-conformance, and following corrective actions as needed.
* Supporting production processes and work order tracking via data capture and ERP systems.
* Suggesting improvements to quality and productivity as part of continuous improvement initiatives.
What We Are Looking For:
* Previously worked as a Sub Assembly Welder, MIG Welder, TIG Welder, Fabricator Welder, Production Welder, Welder Fabricator, Welding Technician or in a similar role.
* Practical experience with MIG welding, ideally with both MIG and TIG.
* Ability to work diligently with minimal supervision.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Sub Assembly Welder / MIG Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Sub Assembly Welder / MIG Welder, you will be performing MIG and TIG welding to produce components and assemblies to specification while supporting production targets and quality standards.
This full-time permanent role offers a salary of £13.20 per hour and benefits.
You Will Be Responsible For:
* Working safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
* Using MIG and/or TIG welding equipment to manufacture parts and assemblies as required.
* Preparing and setting up tools and equipment to support welding operations.
* Ensuring components are prepared correctly for welding.
* Monitoring quality, reporting non-conformance, and following corrective actions as needed.
* Supporting production processes and work order tracking via data capture and ERP systems.
* Suggesting improvements to quality and productivity as part of continuous improvement initiatives.
What We Are Looking For:
* Previously worked as a Sub Assembly Welder, MIG Welder, Fabricator Welder, Production Welder, Welder Fabricator, Welding Technician, TIG Welder or in a similar role.
* Practical experience with MIG welding, ideally with both MIG and TIG.
* Ability to work diligently with minimal supervision.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Final Assembly Welder / TIG Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Final Assembly Welder / TIG Welder, you will perform MIG and TIG welding to assemble components and complete final products according to specifications, ensuring production targets are met and quality standards are maintained.
This full-time permanent role offers a salary of £16.12 per hour and benefits.
You Will Be Responsible For:
* Operate MIG and/or TIG welding equipment to assemble final products and components to specification.
* Work safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
* Prepare and set up tools, jigs, and equipment to support welding and assembly operations.
* Ensure components and assemblies are correctly prepared and aligned for welding.
* Monitor quality, report any non-conformances, and follow corrective actions as required.
* Support production processes and work order tracking using data capture and ERP systems.
What We Are Looking For:
* Previously worked as a Final Assembly Welder, TIG Welder, Production Welder, MIG Welder, Fabrication Welder, Welding Technician, Welder or in a similar role.
* Practical experience with MIG and/or TIG welding.
* Ability to work diligently with minimal supervision.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Fabricator / Welder
Stoke-On-Trent
£32-35,000p/a DOE
Mon-Fri, Standard Hours
Benefits of the Fabricator / Welder role
Competitive starting rates
Permanent role
30 days annual leave
Early finish Friday
Employee benefits
We are looking for a Fabricator / Welder to join a well-established, well known, high quality automotive company. This company are leading in their sector and continue to show significant growth, and are therefore investing in expanding their team.
Duties of the Fabricator / Welder role –
Prepare components (cutting, shaping, forming) and assemble sub-assemblies in accordance with standard operating procedures.
Interpret engineering drawings, fabrication specifications and welding instructions
Carry out welding operations (MIG/TIG/stick as required) on steel and/or aluminium structures to meet quality standards.
Use hand tools, power tools, welding machines and other fabrication equipment safely and effectively.
What we are looking for in our Fabricator / Welder-
Experience as a welder/fabricator in a manufacturing environment.
Skilled in one or more welding methods (e.g. MIG, TIG, stick)
Ability to read and interpret engineering drawings
Confident with fabrication tools, measuring instruments and basic hand tools.
If you are interested in the fabricator / welder role, please apply now or contact Grace at E3 Recruitment....Read more...
An exciting opportunity has arisen for a skilled Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Welder, you will play a key role in both sub-assembly and final assembly welding, producing high-quality components and full assemblies in line with production schedules and quality standards.
This is a full-time, permanent role, offering a competitive hourly rate between £13.20 and £16.12, depending on experience, along with excellent company benefits.
You Will Be Responsible For:
? Welding both small components and full assemblies using MIG and/or TIG equipment.
? Preparing and setting up tools, jigs, and equipment required for welding tasks.
? Ensuring all parts and assemblies meet defined quality standards and specifications.
? Reporting any non-conformance and implementing or supporting corrective actions.
? Following production plans and individual work orders to meet output targets.
? Maintaining a clean, tidy, and safe work area.
? Supporting and contributing to continuous improvement initiatives in quality and productivity.
What We Are Looking For:
? Previous experience as a Production Welder, Assembly Welder, MIG Welder, TIG Welder, Fabricator Welder, or in a similar welding role.
? Practical experience with MIG and/or TIG welding at component and/or assembly level.
? Strong understanding of production schedules, process adherence, and quality control.
? A proactive attitude toward maintaining high standards of workmanship and safety.
? Eligibility to work in the United Kingdom.
What's on Offer:
? Competitive Salary.
? Company pension scheme.
? Life insurance and death in service benefit.
? Health and wellbeing programme.
? Generous holiday allowance, including bank holidays.
? On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation....Read more...
Welder
Permanent | Dorking | 40 hours per week
Welder Salary: £33k to £39k + great benefits + bonus
The Company
A global leader in municipal vehicle solutions, this Dorking-based business is renowned for its innovation, quality, and long-term stability. They offer outstanding employee benefits, investment in training, and a supportive working culture.
Welder Role & Responsibilities
Looking for experienced Welders to join a busy component manufacturing team, producing high-quality parts and fabrications in mild and stainless steel.
- MIG and TIG welding to a high commercial standard
- Working from detailed engineering drawings
- Marking out and pressure/leak testing fabrications
- Cleaning and fettling parts ready for painting
- Self-inspection and adherence to ISO quality standards
- Maintaining a clean and safe work environment
- Rotating shifts (earlys and lates)
Welder - Company Benefits
- Profit-related bonus (approx. 5% of salary)
- 25 days holiday + bank holidays
- Excellent pension: up to 7.5% employer contribution
- Life assurance (5x salary) from day one
- Discount shopping portal
- Free on-site parking
- Ride-to-work scheme
- Mental Health First Aiders and access to EAP & training
Applying for the Welder Position
If you're an experienced MIG/TIG Welder based near Dorking and looking for a permanent role with top benefits and a supportive team apply now or call Hayden at Holt Engineering on 07955 081 482 for more info.....Read more...
An exciting opportunity has arisen for a Production Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Production Welder, you will be working on small component welding to support production and maintain the high-quality standards.
This full-time permanent role offers a salary of £13.20 per hour and benefits.
You Will Be Responsible For:
* Welding small components using MIG and/or TIG equipment according to defined procedures.
* Preparing and setting up tools and equipment for welding tasks.
* Ensuring parts are manufactured to specification and adhering to quality standards.
* Reporting any non-conformance and ensuring corrective actions are applied.
* Supporting production schedules and work orders, meeting output targets.
* Maintaining a clean and organised work area.
* Supporting continuous improvement initiatives by suggesting quality or productivity enhancements.
What We Are Looking For:
* Previously worked as a Production Welder, Sub Assembly Welder, MIG Welder, TIG Welder, Fabricator Welder, Welder Fabricator, Welding Technician or in a similar role.
* Practical experience with MIG and/or TIG welding at assembly level.
* Ideally have experience in automotive sector.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Final Assembly Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Final Assembly Welder, you will perform MIG and TIG welding to assemble components and complete final products according to specifications, ensuring production targets are met and quality standards are maintained.
This full-time permanent role offers a salary of £16.12 per hour and benefits.
You Will Be Responsible For:
* Operate MIG and/or TIG welding equipment to assemble final products and components to specification.
* Work safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
* Prepare and set up tools, jigs, and equipment to support welding and assembly operations.
* Ensure components and assemblies are correctly prepared and aligned for welding.
* Monitor quality, report any non-conformances, and follow corrective actions as required.
* Support production processes and work order tracking using data capture and ERP systems.
What We Are Looking For:
* Previously worked as a Final Assembly Welder, MIG Welder, TIG Welder, Production Welder, Fabrication Welder, Welding Technician, Welder or in a similar role.
* Practical experience with MIG and/or TIG welding.
* Ability to work diligently with minimal supervision.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a skilled Automotive Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As an Automotive Welder, you will play a key role in both sub-assembly and final assembly welding, producing high-quality components and full assemblies in line with production schedules and quality standards.
This is a full-time, permanent role, offering a competitive hourly rate between £13.20 and £16.12, depending on experience, along with excellent company benefits.
You Will Be Responsible For:
* Welding both small components and full assemblies using MIG and/or TIG equipment.
* Preparing and setting up tools, jigs, and equipment required for welding tasks.
* Ensuring all parts and assemblies meet defined quality standards and specifications.
* Reporting any non-conformance and implementing or supporting corrective actions.
* Following production plans and individual work orders to meet output targets.
* Maintaining a clean, tidy, and safe work area.
* Supporting and contributing to continuous improvement initiatives in quality and productivity.
What We Are Looking For:
* Previous experience as a Production Welder, Automotive Welder, Assembly Welder, MIG Welder, TIG Welder, Fabricator Welder, or in a similar welding role.
* Practical experience with MIG and/or TIG welding at component and/or assembly level.
* Strong understanding of production schedules, process adherence, and quality control.
* A proactive attitude toward maintaining high standards of workmanship and safety.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance, including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An opportunity has arisen for aFabricator to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Fabricator, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
? Reading and interpreting 2D and 3D engineering drawings accurately.
? Measuring, marking, cutting, and bending materials to required dimensions.
? Assembling and welding fabricated parts to produce finished products.
? Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
? Conducting quality checks and completing relevant documentation.
? Adhering to all health and safety procedures within the workshop.
What we are looking for
? Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
? Have at least 3 years of fabrication experience
? Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
? Prior experience in MIG welding, ideally have experience in both TIG and MIG.
? Skilled in working with mild steel, galvanised, and Zintec sheet materials.
? Ability to read and interpret technical drawings (2D & 3D).
? Strong practical understanding of fabrication tools and processes.
? Good mathematical ability and attention to detail.
? Comfortable handling and moving heavy metal components.
Shift:
? Monday to Thursday: 7am to 4pm
? Friday: From 7am to 1pm
? Working hours: 40 per week
What's on offer
? Competitive salary
? Overtime opportunities.
? 31 days' holiday (including bank holidays), with additional entitlement for l....Read more...
We are looking for a skilled Welder Fabricator to join the team on a 6‑month temporary basis, working on‑site at a chemical manufacturing facility. If successful, this Welder Fabricator role may become permanent. You will be fabricating, repairing, and modifying plant equipment, pipework, steel structures and process support systems, always working to strict standards of safety and quality. We need a Welder Fabricator who takes pride in precision and reliability.
Key Responsibilities of Welder Fabricator:
Fabricate, assemble, and weld components, structures and pipework from drawings/specifications using TIG or equivalent welding methods.
Perform planned maintenance, modifications and reactive repairs on plant equipment, steel fabrications, vessels, pipe spools etc.
Read and interpret engineering/technical drawings, weld symbols and ensure work meets required tolerances and standards.
Maintain safety, quality, environmental, and SHE (Safety, Health, Environment) standards at all times.
Document all welding/fabrication tasks, ensure inspections are carried out, and follow required procedures and test plans either under supervision or independently.
Support site shutdowns or modifications when required, working with maintenance and engineering teams to deliver to schedule.
Essential Skills & Experience required from Welder Fabricator:
Proven experience in welding (TIG) /fabrication in an industrial or process environment (chemical or allied industry preferred)
Recognised Welding Qualifications
Good mechanical understanding of steel, pipework, vessels and structural fabrications or piping systems
Strong focus on safety, attention to detail and quality workmanship
If you are an experienced Welder Fabricator who values safety, precision and quality, we’d love to consider you for this role. Please click the link to apply directly.....Read more...
An opportunity has arisen for a Welder Fabricator to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Welder Fabricator, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
* Reading and interpreting 2D and 3D engineering drawings accurately.
* Measuring, marking, cutting, and bending materials to required dimensions.
* Assembling and welding fabricated parts to produce finished products.
* Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
* Conducting quality checks and completing relevant documentation.
* Adhering to all health and safety procedures within the workshop.
What we are looking for
* Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
* Have at least 3 years of fabrication experience
* Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
* Prior experience in MIG welding, ideally have experience in both TIG and MIG.
* Skilled in working with mild steel, galvanised, and Zintec sheet materials.
* Ability to read and interpret technical drawings (2D & 3D).
* Strong practical understanding of fabrication tools and processes.
* Good mathematical ability and attention to detail.
* Comfortable handling and moving heavy metal components.
Shift:
* Monday to Thursday: 7am to 4pm
* Friday: From 7am to 1pm
* Working hours: 40 per week
What's on offer
* Competitive salary
* Overtime opportunities.
* 31 days' holiday (including bank holidays), with additional entitlement for long service.
* Christmas shutdown and early finish every Friday.
* Free on-site parking and health check-ups.
* Death-in-service cover.
* Salary sacrifice scheme
* Access to 24/7 online GP services for you and your family.
* Additional staff incentives including vouchers and company benefits.
This is a fantastic opportunity to join a respected engineering business offering long-term stability, development, and excellent working conditions.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An opportunity has arisen for a Fabricator Welder to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a Fabricator Welder, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
* Reading and interpreting 2D and 3D engineering drawings accurately.
* Measuring, marking, cutting, and bending materials to required dimensions.
* Assembling and welding fabricated parts to produce finished products.
* Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
* Conducting quality checks and completing relevant documentation.
* Adhering to all health and safety procedures within the workshop.
What we are looking for
* Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
* Have at least 3 years of fabrication experience
* Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
* Prior experience in MIG welding, ideally have experience in both TIG and MIG.
* Skilled in working with mild steel, galvanised, and Zintec sheet materials.
* Ability to read and interpret technical drawings (2D & 3D).
* Strong practical understanding of fabrication tools and processes.
* Good mathematical ability and attention to detail.
* Comfortable handling and moving heavy metal components.
Shift:
* Monday to Thursday: 7am to 4pm
* Friday: From 7am to 1pm
* Working hours: 40 per week
What's on offer
* Competitive salary
* Overtime opportunities.
* 31 days' holiday (including bank holidays), with additional entitlement for long service.
* Christmas shutdown and early finish every Friday.
* Free on-site parking and health check-ups.
* Death-in-service cover.
* Salary sacrifice scheme
* Access to 24/7 online GP services for you and your family.
* Additional staff incentives including vouchers and company benefits.
This is a fantastic opportunity to join a respected engineering business offering long-term stability, development, and excellent working conditions.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An opportunity has arisen for aMIG Welder to join a well-established engineering and manufacturing organisation producing precision-engineered metal products and bespoke enclosures for a range of industrial clients.
As a MIG Welder, you will be fabricating and welding high-quality metal components in line with detailed engineering drawings and specifications.
This full-time permanent role offers a competitive salary and benefits.
You will be responsible for:
* Reading and interpreting 2D and 3D engineering drawings accurately.
* Measuring, marking, cutting, and bending materials to required dimensions.
* Assembling and welding fabricated parts to produce finished products.
* Grinding, finishing, and inspecting completed work to ensure it meets quality standards.
* Conducting quality checks and completing relevant documentation.
* Adhering to all health and safety procedures within the workshop.
What we are looking for
* Previously worked as a Fabricator Welder, Welder Fabricator, MIG Welder, TIG Welder, Sheet Metal Fabricator, Metal Fabricator, Welder, Fabricator, Welding Technician, Fabrication Technician or in a similar role
* Have at least 3 years of fabrication experience
* Proven experience working as a metal fabricator or welder within an engineering or manufacturing environment.
* Prior experience in MIG welding, ideally have experience in both TIG and MIG.
* Skilled in working with mild steel, galvanised, and Zintec sheet materials.
* Ability to read and interpret technical drawings (2D & 3D).
* Strong practical understanding of fabrication tools and processes.
* Good mathematical ability and attention to detail.
* Comfortable handling and moving heavy metal components.
Shift:
* Monday to Thursday: 7am to 4pm
* Friday: From 7am to 1pm
* Working hours: 40 per week
What's on offer
* Competitive salary
* Overtime opportunities.
* 31 days' holiday (including bank holidays), with additional entitlement for long service.
* Christmas shutdown and early finish every Friday.
* Free on-site parking and health check-ups.
* Death-in-service cover.
* Salary sacrifice scheme
* Access to 24/7 online GP services for you and your family.
* Additional staff incentives including vouchers and company benefits.
This is a fantastic opportunity to join a respected engineering business offering long-term stability, development, and excellent working conditions.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources are an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
