Assessing a vehicle to establish the extent of damage
Remove and refit non-structural body panels and mechanical and electrical systems
Remove and refit any part relating to the vehicle, to the correct alignment
Remove, repair, and replace engine, gearbox, suspension, mechanical and electrical systems
Diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system
Training:
Level 3 Vehicle damage mechanical, electrical and trim (MET) technician apprenticeship standard
Apprentices will be required to achieve Certification in Refrigerant Handling (EC 842-2006).
Not only will apprentices be working and trained within the garage, but they will also attend an approved college on block release to work towards and achieve their Certificate at Level 3 in Vehicle Damage Mechanical Electrical and Trim (MET)
A skills coach will visit at least every 28 days as part of a close support network to ensure that apprentices are both enjoying and succeeding in their course
Training Outcome:The right candidate may move into a full-time career within the automotive industry with many opportunities to progress to positions of authority.
The opportunities are endless. By having a highly regarded set of skills, apprentices can go on to develop their career within the specific interests they may have, whether it be progressing through their dealership or working towards a job within motorsport.Employer Description:The unrivalled combination of our trained and experienced workforce, married with the very latest technology and techniques, FMG Repair Services boasts manufacturer accreditations, ATA training accreditation, as well as Insurer repair approvals.
In addition, many of our sites hold BS 10125 accreditation - an important industry indicator of quality, meaning you can trust our team to complete your vehicle repairs to the highest standard.Working Hours :Monday - Friday, 9.00am - 5.00pm, some hours may vary.
Start date to be confirmed.Skills: Communication skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Assessing a vehicle to establish the extent of damage
Remove and refit non-structural body panels and mechanical and electrical systems
Remove and refit any part relating to the vehicle, to the correct alignment
Remove, repair, and replace engine, gearbox, suspension, mechanical and electrical systems
Diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system
Training:
Level 3 Vehicle damage mechanical, electrical and trim (MET) technician apprenticeship standard
Apprentices will be required to achieve Certification in Refrigerant Handling (EC 842-2006).
Not only will apprentices be working and trained within the garage, but they will also attend an approved college on block release to work towards and achieve their Certificate at Level 3 in Vehicle Damage Mechanical Electrical and Trim (MET)
A skills coach will visit at least every 28 days as part of a close support network to ensure that apprentices are both enjoying and succeeding in their course
Training Outcome:The right candidate may move into a full-time career within the automotive industry with many opportunities to progress to positions of authority.
The opportunities are endless. By having a highly regarded set of skills, apprentices can go on to develop their career within the specific interests they may have, whether it be progressing through their dealership or working towards a job within motorsport.Employer Description:The unrivalled combination of our trained and experienced workforce, married with the very latest technology and techniques, FMG Repair Services boasts manufacturer accreditations, ATA training accreditation, as well as Insurer repair approvals.
In addition, many of our sites hold BS 10125 accreditation - an important industry indicator of quality, meaning you can trust our team to complete your vehicle repairs to the highest standard.Working Hours :Monday - Friday, 9am - 5pm, some hours may vary. Start date to be confirmed.Skills: Communication skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Assessing a vehicle to establish the extent of damage
Remove and refit non-structural body panels and mechanical and electrical systems
Remove and refit any part relating to the vehicle, to the correct alignment
Remove, repair, and replace engine, gearbox, suspension, mechanical and electrical systems
Diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system
Training:
Level 3 Vehicle damage mechanical, electrical and trim (MET) technician apprenticeship standard
Apprentices will be required to achieve Certification in Refrigerant Handling (EC 842-2006)
Not only will apprentices be working and trained within the garage, but they will also attend an approved college on block release to work towards and achieve their Certificate at Level 3 in Vehicle Damage Mechanical Electrical and Trim (MET)
A skills coach will visit at least every 28 days as part of a close support network to ensure that apprentices are both enjoying and succeeding in their course
Training Outcome:The right candidate may move into a full-time career within the automotive industry with many opportunities to progress to positions of authority.
The opportunities are endless. By having a highly regarded set of skills, apprentices can go on to develop their career within the specific interests they may have, whether it be progressing through their dealership or working towards a job within motorsport.Employer Description:The unrivalled combination of our trained and experienced workforce, married with the very latest technology and techniques, FMG Repair Services boasts manufacturer accreditations, ATA training accreditation, as well as Insurer repair approvals.
In addition, many of our sites hold BS 10125 accreditation - an important industry indicator of quality, meaning you can trust our team to complete your vehicle repairs to the highest standard.Working Hours :Monday- Friday, 9am- 5pm, some hours may vary.
Start date to be confirmed.Skills: Communication skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Assessing a vehicle to establish the extent of damage
Remove and refit non-structural body panels and mechanical and electrical systems
Remove and refit any part relating to the vehicle, to the correct alignment
Remove, repair, and replace engine, gearbox, suspension, mechanical and electrical systems
Diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system
Training:
Level 3 Vehicle damage mechanical, electrical and trim (MET) technician apprenticeship standard
Apprentices will be required to achieve Certification in Refrigerant Handling (EC 842-2006).
Not only will apprentices be working and trained within the garage, but they will also attend an approved college on block release to work towards and achieve their Certificate at Level 3 in Vehicle Damage Mechanical Electrical and Trim (MET)
A skills coach will visit at least every 28 days as part of a close support network to ensure that apprentices are both enjoying and succeeding in their course
Training Outcome:The right candidate may move into a full-time career within the automotive industry with many opportunities to progress to positions of authority.
The opportunities are endless. By having a highly regarded set of skills, apprentices can go on to develop their career within the specific interests they may have, whether it be progressing through their dealership or working towards a job within motorsport.Employer Description:The unrivalled combination of our trained and experienced workforce, married with the very latest technology and techniques, FMG Repair Services boasts manufacturer accreditations, ATA training accreditation, as well as Insurer repair approvals.
In addition, many of our sites hold BS 10125 accreditation - an important industry indicator of quality, meaning you can trust our team to complete your vehicle repairs to the highest standard.Working Hours :Monday - Friday, 9.00am - 5.00pm, some hours may vary.
Start date to be confirmed.Skills: Communication skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Assessing a vehicle to establish the extent of damage
Remove and refit non-structural body panels and mechanical and electrical systems
Remove and refit any part relating to the vehicle to the correct alignment
Remove, repair, and replace engine, gearbox, suspension, mechanical and electrical systems
Diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system
Training:
Level 3 Vehicle damage mechanical, electrical and trim (MET) technician apprenticeship standard
Apprentices will be required to achieve Certification in Refrigerant Handling (EC 842-2006).
Not only will apprentices be working and trained within the garage, but they will also attend an approved college on block release to work towards and achieve their Certificate at Level 3 in Vehicle Damage Mechanical, Electrical and Trim (MET)
A skills coach will visit at least every 28 days as part of a close support network to ensure that apprentices are both enjoying and succeeding in their course
Training Outcome:The right candidate may move into a full-time career within the automotive industry with many opportunities to progress to positions of authority.
The opportunities are endless. By having a highly regarded set of skills, apprentices can go on to develop their career within the specific interests they may have, whether it be progressing through their dealership or working towards a job within motorsport.Employer Description:The unrivalled combination of our trained and experienced workforce, married with the very latest technology and techniques, FMG Repair Services boasts manufacturer accreditations, ATA training accreditation, as well as Insurer repair approvals.
In addition, many of our sites hold BS 10125 accreditation - an important industry indicator of quality, meaning you can trust our team to complete your vehicle repairs to the highest standard.Working Hours :Monday - Friday, 9am - 5pm, some hours may vary.
Start date to be confirmed.Skills: Communication skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Assessing a vehicle to establish the extent of damage
Remove and refit non-structural body panels and mechanical and electrical systems
Remove and refit any part relating to the vehicle to the correct alignment
Remove, repair, and replace engine, gearbox, suspension, mechanical and electrical systems
Diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system
Training:
Level 3 Vehicle damage mechanical, electrical and trim (MET) technician apprenticeship standard
Apprentices will be required to achieve Certification in Refrigerant Handling (EC 842-2006).
Not only will apprentices be working and trained within the garage, but they will also attend an approved college on block release to work towards and achieve their Certificate at Level 3 in Vehicle Damage Mechanical, Electrical and Trim (MET)
A skills coach will visit at least every 28 days as part of a close support network to ensure that apprentices are both enjoying and succeeding in their course
Training Outcome:The right candidate may move into a full-time career within the automotive industry with many opportunities to progress to positions of authority.
The opportunities are endless. By having a highly regarded set of skills, apprentices can go on to develop their career within the specific interests they may have, whether it be progressing through their dealership or working towards a job within motorsport.Employer Description:The unrivalled combination of our trained and experienced workforce, married with the very latest technology and techniques, FMG Repair Services boasts manufacturer accreditations, ATA training accreditation, as well as Insurer repair approvals.
In addition, many of our sites hold BS 10125 accreditation - an important industry indicator of quality, meaning you can trust our team to complete your vehicle repairs to the highest standard.Working Hours :Monday - Friday, 9am - 5pm, some hours may vary.
Start date to be confirmed.Skills: Communication skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Assessing a vehicle to establish the extent of damage
Remove and refit non-structural body panels and mechanical and electrical systems
Remove and refit any part relating to the vehicle, to the correct alignment
Remove, repair, and replace engine, gearbox, suspension, mechanical and electrical systems
Diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system
Training:
Level 3 Vehicle damage mechanical, electrical and trim (MET) technician apprenticeship standard
Apprentices will be required to achieve Certification in Refrigerant Handling (EC 842-2006)
Not only will apprentices be working and trained within the garage, but they will also attend an approved college on block release to work towards and achieve their Certificate at Level 3 in Vehicle Damage Mechanical Electrical and Trim (MET)
A skills coach will visit at least every 28 days as part of a close support network to ensure that apprentices are both enjoying and succeeding in their course
Training Outcome:The right candidate may move into a full-time career within the automotive industry with many opportunities to progress to positions of authority.
The opportunities are endless. By having a highly regarded set of skills, apprentices can go on to develop their career within the specific interests they may have, whether it be progressing through their dealership or working towards a job within motorsport.Employer Description:The unrivalled combination of our trained and experienced workforce, married with the very latest technology and techniques, FMG Repair Services boasts manufacturer accreditations, ATA training accreditation, as well as Insurer repair approvals.
In addition, many of our sites hold BS 10125 accreditation - an important industry indicator of quality, meaning you can trust our team to complete your vehicle repairs to the highest standard.Working Hours :Monday - Friday, 9.00am - 5.00pm, some hours may vary.
Start date to be confirmed.Skills: Communication skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Assessing a vehicle to establish the extent of damage
Remove and refit non-structural body panels and mechanical and electrical systems
Remove and refit any part relating to the vehicle, to the correct alignment
Remove, repair, and replace engine, gearbox, suspension, mechanical and electrical systems
Diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system
Training:
Level 3 Vehicle damage mechanical, electrical and trim (MET) technician apprenticeship standard
Apprentices will be required to achieve Certification in Refrigerant Handling (EC 842-2006)
Not only will apprentices be working and trained within the garage, but they will also attend an approved college on block release to work towards and achieve their Certificate at Level 3 in Vehicle Damage Mechanical Electrical and Trim (MET)
A skills coach will visit at least every 28 days as part of a close support network to ensure that apprentices are both enjoying and succeeding in their course
Training Outcome:The right candidate may move into a full-time career within the automotive industry with many opportunities to progress to positions of authority.
The opportunities are endless. By having a highly regarded set of skills, apprentices can go on to develop their career within the specific interests they may have, whether it be progressing through their dealership or working towards a job within motorsport.Employer Description:The unrivalled combination of our trained and experienced workforce, married with the very latest technology and techniques, FMG Repair Services boasts manufacturer accreditations, ATA training accreditation, as well as Insurer repair approvals.
In addition, many of our sites hold BS 10125 accreditation - an important industry indicator of quality, meaning you can trust our team to complete your vehicle repairs to the highest standard.Working Hours :Monday - Friday, 9.00am - 5.00pm, some hours may vary.
Start date to be confirmed.Skills: Communication skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
This is your chance to learn real skills, work on real vehicles, and become part of a team that gets vehicles looking good as new.
What You’ll Be Doing...
You’ll be hands-on from the get-go, working on cars that need a bit of TLC. Your day-to-day might include:
Checking vehicles to see what kind of damage has been done
Deciding whether panels should be repaired or replaced
Removing and refitting damaged panels and body parts
Using tools and techniques to straighten or reshape metal panels
Filling in small dents, holes, or rust spots with body filler
You’ll Also Get Involved In:
Keeping a log of what work you’ve done and how long it took
Speaking with customers or insurance companies when needed
Helping put together quotes and repair estimates
What We’re Looking For:
Someone who enjoys working with their hands and solving problems
Good attention to detail - the little things matter in this job
A positive, can-do attitude and willingness to learn
Team spirit - you’ll be working closely with other technicians
Why Join Us?
Be part of the UK’s leading vehicle repair group
Get proper, hands-on training to grow your career
Friendly and professional workshop environment
Real opportunities to move up and specialise
Ready to get your hands dirty and start a career you can be proud of?
Apply now and let’s get started!Training:This is a Vehicle Damage Panel Apprenticeship programme, delivered by Remit Group. Awarding Body: Institute of the Motor Industry (IMI).Training is delivered in the workplace and on block release at the Remit Automotive Academy in Derby. This means you will be required to stay in a hotel for 12 separate weeks (Mon - Fri) over the duration of the programme, which equals 4 weeks per year. All associated costs for training are met by the employer and there will be no cost to you. You will also be assigned a dedicated Development Coach who will visit you every 4-6 weeks either in the workplace or remotely via Microsoft Teams, giving 1-2-1 advice and guidance to help you achieve the following IMI qualifications:
Vehicle Damage Panel Technician Level 3
Functional Skills Level 2 in English & maths (if required)
Training Outcome:In addition to the salary:
You will be provided with the use of starter tooling kits on joining the company (must remain on site)
Eligible for the technical apprentice award scheme based on performance entry gates
Employer Description:FMG is part of Zigup Plc and are the leading comprehensive automotive repairer in the UK with the largest network of 65 repair centres nationwide. Together with a mobile repair, glass repair and replacement service, FMG offer one of the broadest ranges of repair solutions and services to the insurance industry, fleet operators and direct to the vehicle owner.Working Hours :40 hours (Monday - Friday), working hours TBCSkills: Enthusiasm to learn,Mechanically minded....Read more...
This is your chance to learn real skills, work on real vehicles, and become part of a team that gets vehicles looking good as new.
What You’ll Be Doing...
You’ll be hands-on from the get-go, working on cars that need a bit of TLC. Your day-to-day might include:
Checking vehicles to see what kind of damage has been done
Deciding whether panels should be repaired or replaced
Removing and refitting damaged panels and body parts
Using tools and techniques to straighten or reshape metal panels
Filling in small dents, holes, or rust spots with body filler
You’ll Also Get Involved In:
Keeping a log of what work you’ve done and how long it took
Speaking with customers or insurance companies when needed
Helping put together quotes and repair estimates
What We’re Looking For:
Someone who enjoys working with their hands and solving problems
Good attention to detail – the little things matter in this job
A positive, can-do attitude and willingness to learn
Team spirit – you’ll be working closely with other technicians
Why Join Us?
Be part of the UK’s leading vehicle repair group
Get proper, hands-on training to grow your career
Friendly and professional workshop environment
Real opportunities to move up and specialise
Ready to get your hands dirty and start a career you can be proud of?
Apply now and let’s get started!Training:This is a Vehicle Damage Panel Apprenticeship programme, delivered by Remit Group. Awarding Body: Institute of the Motor Industry (IMI)Training is delivered in the workplace and on block release at the Remit Automotive Academy in Derby. This means you will be required to stay in a hotel for 12 separate weeks (Mon – Fri) over the duration of the programme, which equals 4 weeks per year. All associated costs for training are met by the employer and there will be no cost to you. You will also be assigned a dedicated Development Coach who will visit you every 4-6 weeks, either in the workplace or remotely via Microsoft Teams, giving 1-2-1 advice and guidance to help you achieve the following IMI qualifications: Vehicle Damage Panel Technician Level 3.Functional Skills Level 2 in English & maths (if required).Training Outcome:In addition to the salary:• You will be provided with the use of starter tooling kits on joining the company (must remain on site)• Eligible for the technical apprentice award scheme based on performance entry gatesEmployer Description:FMG is part of Zigup Plc and are the leading comprehensive automotive repairer in the UK with the largest network of 65 repair centres nationwide. Together with a mobile repair, glass repair and replacement service, FMG offer one of the broadest ranges of repair solutions and services to the insurance industry, fleet operators and direct to the vehicle owner.Working Hours :40 hours (Monday - Friday).Skills: Enthusiasm to learn,Mechanically minded....Read more...
This is your chance to learn real skills, work on real vehicles, and become part of a team that gets vehicles looking good as new.What you’ll be doing...You’ll be hands-on from the get-go, working on cars that need a bit of TLC. Your day-to-day might include:
Checking vehicles to see what kind of damage has been done
Deciding whether panels should be repaired or replaced
Removing and refitting damaged panels and body parts
Using tools and techniques to straighten or reshape metal panels
Filling in small dents, holes, or rust spots with body filler
You’ll also get involved in:
Keeping a log of what work you’ve done and how long it took
Speaking with customers or insurance companies when needed
Helping put together quotes and repair estimates
What we’re looking for:
Someone who enjoys working with their hands and solving problems
Good attention to detail – the little things matter in this job
A positive, can-do attitude and willingness to learn
Team spirit – you’ll be working closely with other technicians
Why join us?
Be part of the UK’s leading vehicle repair group
Get proper, hands-on training to grow your career
Friendly and professional workshop environment
Real opportunities to move up and specialise
Ready to get your hands dirty and start a career you can be proud of?Apply now and let’s get started!Training:This is a Vehicle Damage Panel Apprenticeship programme, delivered by Remit Group. Awarding Body: Institute of the Motor Industry (IMI).Training is delivered in the workplace and on block release at the Remit Automotive Academy in Derby. This means you will be required to stay in a hotel for 12 separate weeks (Mon – Fri) over the duration of the programme, which equals 4 weeks per year. All associated costs for training are met by the employer and there will be no cost to you. You will also be assigned a dedicated Development Coach who will visit you every 4-6 weeks either in the workplace or remotely via Microsoft Teams, giving 1-2-1 advice and guidance to help you achieve the following IMI qualifications:
Vehicle Damage Panel Technician Level 3
Functional Skills Level 2 in English & Maths (if required)
Training Outcome:In addition to the salary:
You will be provided with the use of starter tooling kits on joining the company (must remain on site)
Eligible for the technical apprentice award scheme based on performance entry gates
Employer Description:FMG is part of Zigup Plc and are the leading comprehensive automotive repairer in the UK with the largest network of 65 repair centres nationwide. Together with a mobile repair, glass repair and replacement service, FMG offer one of the broadest ranges of repair solutions and services to the insurance industry, fleet operators and direct to the vehicle owner.Working Hours :40 hours (Monday - Friday). Shifts to be confirmed.Skills: Enthusiasm to learn,Mechanically minded....Read more...
This is your chance to learn real skills, work on real vehicles, and become part of a team that gets vehicles looking good as new.
What You’ll Be Doing...
You’ll be hands-on from the get-go, working on cars that need a bit of TLC. Your day-to-day might include:
Checking vehicles to see what kind of damage has been done
Deciding whether panels should be repaired or replaced
Removing and refitting damaged panels and body parts
Using tools and techniques to straighten or reshape metal panels
Filling in small dents, holes, or rust spots with body filler
You’ll Also Get Involved In:
Keeping a log of what work you’ve done and how long it took
Speaking with customers or insurance companies when needed
Helping put together quotes and repair estimates
What We’re Looking For:
Someone who enjoys working with their hands and solving problems
Good attention to detail – the little things matter in this job
A positive, can-do attitude and willingness to learn
Team spirit – you’ll be working closely with other technicians
Why Join Us?
Be part of the UK’s leading vehicle repair group
Get proper, hands-on training to grow your career
Friendly and professional workshop environment
Real opportunities to move up and specialise
Ready to get your hands dirty and start a career you can be proud of?
Apply now and let’s get started!Training:This is a Vehicle Damage Panel Apprenticeship programme, delivered by Remit Group.
Awarding Body: Institute of the Motor Industry (IMI).
Training is delivered in the workplace and on block release at the Remit Automotive Academy in Derby. This means you will be required to stay in a hotel for 12 separate weeks (Mon – Fri) over the duration of the programme, which equals 4 weeks per year. All associated costs for training are met by the employer and there will be no cost to you.
You will also be assigned a dedicated Development Coach who will visit you every 4-6 weeks either in the workplace or remotely via Microsoft Teams, giving 1-2-1 advice and guidance to help you achieve the following IMI qualifications:
Vehicle Damage Panel Technician Level 3
Functional Skills Level 2 in English & Maths (if required)
Training Outcome:In addition to the salary:
You will be provided with the use of starter tooling kits on joining the company (must remain on site)
Eligible for the technical apprentice award scheme based on performance entry gates
Employer Description:FMG is part of Zigup Plc and are the leading comprehensive automotive repairer in the UK with the largest network of 65 repair centres nationwide. Together with a mobile repair, glass repair and replacement service, FMG offer one of the broadest ranges of repair solutions and services to the insurance industry, fleet operators and direct to the vehicle owner.Working Hours :40 hours (Monday - Friday). Times to be confirmed.Skills: Enthusiasm to learn,Mechanically minded....Read more...
This is your chance to learn real skills, work on real vehicles, and become part of a team that gets vehicles looking good as new.
What You’ll Be Doing...
You’ll be hands-on from the get-go, working on cars that need a bit of TLC. Your day-to-day might include:
Checking vehicles to see what kind of damage has been done
Deciding whether panels should be repaired or replaced
Removing and refitting damaged panels and body parts
Using tools and techniques to straighten or reshape metal panels
Filling in small dents, holes, or rust spots with body filler
You’ll Also Get Involved In:
Keeping a log of what work you’ve done and how long it took
Speaking with customers or insurance companies when needed
Helping put together quotes and repair estimates
What We’re Looking For:
Someone who enjoys working with their hands and solving problems
Good attention to detail – the little things matter in this job
A positive, can-do attitude and willingness to learn
Team spirit – you’ll be working closely with other technicians
Why Join Us?
Be part of the UK’s leading vehicle repair group
Get proper, hands-on training to grow your career
Friendly and professional workshop environment
Real opportunities to move up and specialise
Ready to get your hands dirty and start a career you can be proud of?
Apply now and let’s get started!Training:This is a Vehicle Damage Panel Apprenticeship programme, delivered by Remit Group. Awarding Body: Institute of the Motor Industry (IMI)Training is delivered in the workplace and on block release at the Remit Automotive Academy in Derby. This means you will be required to stay in a hotel for 12 separate weeks (Mon – Fri) over the duration of the programme, which equals 4 weeks per year. All associated costs for training are met by the employer and there will be no cost to you. You will also be assigned a dedicated Development Coach who will visit you every 4-6 weeks, either in the workplace or remotely via Microsoft Teams, giving 1-2-1 advice and guidance to help you achieve the following IMI qualifications: Vehicle Damage Panel Technician Level 3.Functional Skills Level 2 in English & maths (if required).Training Outcome:In addition to the salary:• You will be provided with the use of starter tooling kits on joining the company (must remain on site)• Eligible for the technical apprentice award scheme based on performance entry gatesEmployer Description:FMG is part of Zigup Plc and are the leading comprehensive automotive repairer in the UK with the largest network of 65 repair centres nationwide. Together with a mobile repair, glass repair and replacement service, FMG offer one of the broadest ranges of repair solutions and services to the insurance industry, fleet operators and direct to the vehicle owner.Working Hours :40 hours (Monday - Friday).Skills: Enthusiasm to learn,Mechanically minded....Read more...
This is your chance to learn real skills, work on real vehicles, and become part of a team that gets vehicles looking good as new.
What You’ll Be Doing...
You’ll be hands-on from the get-go, working on cars that need a bit of TLC. Your day-to-day might include:
Checking vehicles to see what kind of damage has been done
Deciding whether panels should be repaired or replaced
Removing and refitting damaged panels and body parts
Using tools and techniques to straighten or reshape metal panels
Filling in small dents, holes, or rust spots with body filler
You’ll Also Get Involved In:
Keeping a log of what work you’ve done and how long it took
Speaking with customers or insurance companies when needed
Helping put together quotes and repair estimates
What We’re Looking For:
Someone who enjoys working with their hands and solving problems
Good attention to detail – the little things matter in this job
A positive, can-do attitude and willingness to learn
Team spirit – you’ll be working closely with other technicians
Why Join Us?
Be part of the UK’s leading vehicle repair group
Get proper, hands-on training to grow your career
Friendly and professional workshop environment
Real opportunities to move up and specialise
Ready to get your hands dirty and start a career you can be proud of?
Apply now and let’s get started!Training:This is a Vehicle Damage Panel Apprenticeship programme, delivered by Remit Group.
Awarding Body: Institute of the Motor Industry (IMI).
Training is delivered in the workplace and on block release at the Remit Automotive Academy in Derby. This means you will be required to stay in a hotel for 12 separate weeks (Mon – Fri) over the duration of the programme, which equals 4 weeks per year. All associated costs for training are met by the employer and there will be no cost to you.
You will also be assigned a dedicated Development Coach who will visit you every 4-6 weeks either in the workplace or remotely via Microsoft Teams, giving 1-2-1 advice and guidance to help you achieve the following IMI qualifications:
Vehicle Damage Panel Technician Level 3
Functional Skills Level 2 in English & Maths (if required)
Training Outcome:In addition to the salary:
You will be provided with the use of starter tooling kits on joining the company (must remain on site)
Eligible for the technical apprentice award scheme based on performance entry gates
Employer Description:FMG is part of Zigup Plc and are the leading comprehensive automotive repairer in the UK with the largest network of 65 repair centres nationwide. Together with a mobile repair, glass repair and replacement service, FMG offer one of the broadest ranges of repair solutions and services to the insurance industry, fleet operators and direct to the vehicle owner.Working Hours :40 hours (Monday - Friday). Times to be confirmed.Skills: Enthusiasm to learn,Mechanically minded....Read more...
Marshall Mercedes-Benz Truck & Van understand the complexities of running a modern-day business, looking after customers is the Marshall mantra and they like to treat customers like one of the family and have done for over 110 years. Their family values are one of the reasons why customers chose Marshall Mercedes-Benz Truck & Van to meet their needs. Marshall’s are as passionate about their people as they are about their vehicles, so if you have an interest in the motor industry and want to work with some of the finest Mercedes-Benz vehicles and parts, Marshall Truck & Van would like to hear from you.What’s in it for you:
Learn and become experienced in the fundamentals of a vehicle Technician role, including servicing, inspections, maintenance, repair and diagnostics.
The chance to be mentored by a highly experienced Marshall HGV Technician, who will be your support throughout the course of the apprenticeship.
First-hand experience of the latest Mercedes-Benz innovation and technology.
Tutor and peer support through Remit with block release classroom and theory sessions to further enhance your understanding of the subject.
Complete the apprenticeship and finish with an industry-recognised qualification.
Package Details:
£7.55 per hour in your first year, after which rate is in line with Apprenticeship National Minimum/Living Wage.
Based onsite in Andover.
40 hours per week, Monday - Friday, 8am – 4:30pm.
18+: Shifts and over time available.
22 days’ holiday each year plus bank holidays.
Benefits:
Pension Scheme.
Reward Discount Shopping.
Further Training & Development.
EV Training.
Cycle to Work.
Free Eye Care Vouchers.
Health & Wellbeing.
Invites to Company Events and Christmas parties.
PPE Footwear Allowance.
Tool Insurance.
Fully paid for training course, including all qualification fees and accommodation.
Training delivery.
In this programme, all aspects of heavy vehicle technology are embedded in this dedicated programme and involves a mix of academic learning and on-the-job training.
Practical learning in the workplace, shadowing your mentor and carrying out the work while being supervised.
Online studies, completing workbooks and job cards, attending online sessions and virtual classes with your Development Coach, all done during your working day.
Attending block release to the Daimler/Remit Training Academy in Coventry, CV2 2TA every 2 months. All costs of your hotel food and accommodation plus all travel arrangements are covered by the Marshall Truck & Van.
Training:Training is delivered in the workplace and on block release to the Daimler Training Academy in Derby. There are a total of 16 x 1 week blocks over the 32 month programme. The costs of hotel accommodation, food and travel are met by the employer and there will be no cost to you. You will also receive 1-2-1 support from your Development Coach to help you achieve:
IMI Heavy Vehicle Service and Maintenance Technician Level 3
Training Outcome:Upon successful completion of the apprenticeship, you will achieve an automotive industry recognised qualification. After this Marshall will continue to invest in your future, by providing training and development opportunities so you can excel in your role and further your skills and experience as a fully qualified Technician.Employer Description:Marshall Group is a multi franchised dealer who started out as a small garage in 1909 and are now the UK’s 6th largest motor retail group. They operate 141 franchised stores and represent 23 bike, car, van and truck manufacturers.Part of the group is Marshall Truck & Van who have 5 state-of-the-art Mercedes-Benz Truck & Van depots in Andover, Croydon, Fareham, Portsmouth and Southampton. All their technicians are trained to manufacturer standards so they can diagnose, service and repair your Mercedes-Benz commercial vehicle.Working Hours :40 hours, 8.00am - 4:30pm, Monday - Friday. Shifts available for 18+Skills: Attention to detail,Enthusiasm to learn,Mechanically minded....Read more...
Eden Tyres are currently seeking a Light Vehicle Technician Apprentice to join their garage.
This is an exciting role with first-class training and outstanding long-term career prospects. The comprehensive programme provides you with an exciting and challenging opportunity to achieve formal qualifications through extensive product training as well as building up confidence and gaining valuable work experience whilst undertaking the role.
Duties will include:
Working alongside qualified Technicians with the investigation, repair and service of vehicles
Producing estimates
Carrying out diagnostics
Warranty work
Assisting with MOT’s on vehicles
Other general technical duties and general housekeeping
Providing excellent customer service to internal and external customers
Training:
Candidates will work towards achieving the Light Vehicle Technician Apprenticeship Standard at Level 3
They will also be required to study towards achieving level 2 maths and English functional skills if they do not already hold equivalent qualifications
The programme lasts for 36 months
The training incorporates underpinning knowledge in partnership and managed by EMTEC Colleges
Throughout the duration of the programme the candidates will be expected to travel to EMTEC’s training centre in Nottingham for 24 separate weeks to carry out skills training
Regular visits to the dealership from EMTEC Vocational Learning Advisors will take place, who will observe all evidence opportunities that occur naturally in the workplace
Candidates will be expected to engage in self-directed learning outside of normal working hours, which will be monitored and tracked through an online e-portal
Assessment Includes:
On-going assessment of soft skills and behaviours
A behaviour assessment
Knowledge and understanding tests at the end of Gateway 1 and 2, Skills tests at the end of Gateway 1 and 2
This is followed by the synoptic assessment, of which there are four components:
Log book (final year review to assess apprentice’s progress)
Behaviour Assessment, Knowledge Test (an in-depth, online test exploring knowledge/ understanding of the apprentice)
Skills Test (two-day practical examination of the skills of the apprentice)
Training Outcome:
Possible permanent position on the completion of the apprenticeship
Employer Description:Eden Tyres & Servicing (Eden Tyres Ltd) is a family-founded automotive service provider based in the East Midlands. Since launching its first branch in Derby in 1981, the company has expanded to around 24–25 modern, full-service garages across the region
Known as one of the UK’s largest independent tyre retailers, Eden Tyres also operates a thriving wholesale division—together distributing over 600,000 tyres annually and keeping a vast inventory in stock.
Eden Tyres offers comprehensive services, including tyre fitting (covering everything from budget to premium brands), MOT testing, car servicing, wheel alignment, brakes, air‑conditioning, batteries, diagnostics, exhausts, suspension, and EV/hybrid services.
Their award‑winning approach (including being named Independent Retailer of the Year 2025) emphasizes modern workshops, transparent pricing, and user-friendly features like online booking and mobile tyre fitting.Working Hours :Monday - Friday, 8.30am - 5.30pm,
Wednesday, 8.30am - 12.30pm
and Saturday, 8.30am - 12.30pm.Skills: Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Logical,Team working,Initiative....Read more...
Eden Tyres are currently seeking a Light Vehicle Technician Apprentice to join their garage.
This is an exciting role with first-class training and outstanding long-term career prospects.
The comprehensive programme provides you with an exciting and challenging opportunity to achieve formal qualifications through extensive product training as well as building up confidence and gaining valuable work experience whilst undertaking the role.
Duties will include:
Working alongside qualified Technicians with the investigation, repair and service of vehicles
Producing estimates
Carrying out diagnostics
Warranty work
Assisting with MOT’s on vehicles
Other general technical duties and general housekeeping
Providing excellent customer service to internal and external customers
Training:
Candidates will work towards achieving the Light Vehicle Technician Apprenticeship Standard at Level 3
They will also be required to study towards achieving level 2 maths and English functional skills if they do not already hold equivalent qualifications
The programme lasts for 36 months
The training incorporates underpinning knowledge in partnership and managed by EMTEC Colleges. Throughout the duration of the programme the candidates will be expected to travel to EMTEC’s training centre in Nottingham for 24 separate weeks to carry out skills training
Regular visits to the dealership from EMTEC Vocational Learning Advisors will take place, who will observe all evidence opportunities that occur naturally in the workplace
Candidates will be expected to engage in self-directed learning outside of normal working hours, which will be monitored and tracked through an online e-portal
Assessment Includes:
On-going assessment of soft skills and behaviours
A behaviour assessment
Knowledge and understanding tests at the end of Gateway 1 and 2, Skills tests at the end of Gateway 1 and 2
This is followed by the synoptic assessment, of which there are four components:
Log book (final year review to assess apprentice’s progress)
Behaviour Assessment, Knowledge Test (an in-depth, online test exploring knowledge/ understanding of the apprentice)
Skills Test (two-day practical examination of the skills of the apprentice)
Training Outcome:
Possible permanent position on the completion of the apprenticeship
Employer Description:Eden Tyres & Servicing (Eden Tyres Ltd) is a family-founded automotive service provider based in the East Midlands. Since launching its first branch in Derby in 1981, the company has expanded to around 24–25 modern, full-service garages across the region
Known as one of the UK’s largest independent tyre retailers, Eden Tyres also operates a thriving wholesale division—together distributing over 600,000 tyres annually and keeping a vast inventory in stock.
Eden Tyres offers comprehensive services, including tyre fitting (covering everything from budget to premium brands), MOT testing, car servicing, wheel alignment, brakes, air‑conditioning, batteries, diagnostics, exhausts, suspension, and EV/hybrid services.
Their award‑winning approach (including being named Independent Retailer of the Year 2025) emphasizes modern workshops, transparent pricing, and user-friendly features like online booking and mobile tyre fitting.Working Hours :Monday - Friday, 8.30am - 5.30pm,
Wednesday, 8.30am - 12.30pm and Saturday, 8.30am - 12.30pmSkills: Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Logical,Team working,Initiative....Read more...
Installation Engineer
Wolverhampton
£30,000 - £34,000 Basic + Overtime (Earnings of £45,000+) + Regular Training + Progression + Vehicle + Mobile + Pension
Work an installation engineer role for the best and most successful company in their industry, whilst getting specialist training and earning over £45,000 with overtime. You’ll get recognition and be rewarded for your work with a company that will treat you as more than just another number.
This company are specialists in the repair, maintenance and calibration of a vast range of mechanical machinery and equipment used in the automotive industry UK wide. Due to continued growth and an overflowing order book, they are looking for an installation engineer to join their highly experienced team. You’ll have opportunity to develop your skills through continuous training and earn over £45,000 with consistent overtime.
Your Role As An Installation Engineer Will Include:
* Installation Engineer role - Product training given* Mechanical and some basic electrical installation of MOT equipment / Garage equipment - brake testers / vehicle lifts etc.* Regional cover role - NO STAY AWAY!
As the Successful Installation Engineer You’ll Have:
* Good mechanical engineering knowledge and skills with installation experience* Background as a mechanical / Installation engineer / field service / technician (or similar) * Ex-forces engineers welcomed* Live around the Wolverhampton area and happy to travel as a Installation Engineer
Please contact Charlie Auburn for immediate consideration
Keywords: Installation engineer, Field service engineer, service engineer, engineer, mobile engineer, field engineer, field service, mechanical, electrical, install, garage equipment, REME, Army, Ex forces, Navy, RAF, Wolverhampton, West Midlands
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Join an expanding team in Gloucestershire as an Assembly Fitter to keep up with their growing business. This is a fantastic opportunity to build a career in a thriving company.As an Assembly Fitter, you'll be part of a dynamic team working with cutting-edge tools and industry leaders in aircraft production. You'll have the chance to work on prestigious aircraft models like the A320 and A330 family, using advanced equipment such as zero gravity lifting and snap-on computerised toolboxes.You'll work on a regularly rotating shift pattern, covering dayshifts and nightshifts (which include a premium shift payment of 38.5% of your salary). Occasionally, there'll be options for working bridging shifts and weekend shifts too.Roles: Assembly Technician, Assembler, Assembly Operative, Production Operator, FitterWhat's in it for you?Competitive starting salary from £35,000, with the potential to increase after completing your training within 18-24 months.Exciting career development opportunities within their growing team.Flexible benefits package through our 'On Board Benefits' Programme, including options like cycle to work schemes, technology savings, retail discounts, healthcare access, sports clubs, and more.What do I need?You'll already have Fitting experience from a previous role, ideally in an Aerospace or Automotive environment. We're looking for someone with:A completed Apprenticeship in Mechanical Engineering.The ability to follow technical drawings, specs, procedures, and test instructions.A desire to learn and understand the basic principles of production flow lines, and takt times.Knowledge of COSH and flow line methodologies is ideal, but not essential for you to applyAnything else I need to know?As a valued member of our team, you'll be entitled to a range of company benefits, including:25 days holiday + UK Bank Holidays, plus the option to buy/sell annual leave.A generous pension scheme, up to 8% employer match.Our Shares and profit share bonus schemeAnd much more!Work Permissions:You must have the right to work in the United Kingdom. Visa sponsorship is not available at this time.....Read more...
An opportunity has arisen for a MIG Welder / Production Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a MIG Welder, you will be carrying out welding and fabrication tasks to support the production of metal assemblies. This full-time permanent role offers a salary range of £25,000 - £31,000 and benefits.
You will be responsible for:
* Performing MIG welding on components and assemblies according to production needs
* Setting up and preparing tools, materials, and equipment before welding
* Operating machinery such as saws and sizers to prepare parts
* Following structured work instructions and standard procedures for consistent output
* Assembling components using jigs and fixtures to maintain product quality
* Liaising with the quality team to resolve issues and contribute to ongoing improvements
* Using the ERP system and shop floor data capture tools to track tasks and workflow
* Carrying out basic tube manipulation and fabrication (training provided)
* Inspecting finished work for accuracy and escalating any issues appropriately
What we are looking for:
* Previously worked as a Welder Fabricator, MIG Welder, Production Welder, Welder, Welding Technician, Fabricator or in a similar role.
* Experience within a production or manufacturing setting
* Confident reading and following technical work instructions and process documentation
* Familiarity with quality standards and procedures in a workshop environment
* Comfortable collaborating with production and quality departments
* Open to developing new skills and fabrication techniques
Shift:
* Monday to Friday: 8am - 4pm
* 30 minute unpaid lunch and 10 minute paid tea break.
What's on offer:
* Competitive salary
* Company pension scheme
* Life insurance cover
* On-site parking
* Health & wellbeing support programme
* 33 days holiday (including bank holidays)
* Death in service
* Free tea, coffee, sugar and milk
This is a fantastic opportunity for a Welder to join a growing team within a forward-thinking manufacturing organisation.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Field Service Engineer
Wolverhampton
£30,000 - £34,000 Basic + Overtime (Earnings of £45,000+) + Regular Training + Progression + Vehicle + Mobile + Pension
Work an Field Service Engineerrole for the best and most successful company in their industry, whilst getting specialist training and earning over £45,000 with overtime. You’ll get recognition and be rewarded for your work with a company that will treat you as more than just another number.
This company are specialists in the repair, maintenance and calibration of a vast range of mechanical machinery and equipment used in the automotive industry UK wide. Due to continued growth and an overflowing order book, they are looking for an Field Service Engineer to join their highly experienced team. You’ll have opportunity to develop your skills through continuous training and earn over £45,000 with consistent overtime.
Your Role As An Field Service Engineer Will Include:
* Installation Engineer role - Product training given* Mechanical and some basic electrical installation of MOT equipment / Garage equipment - brake testers / vehicle lifts etc.* Regional cover role - NO STAY AWAY!
As the Successful Field Service Engineer You’ll Have:
* Good mechanical engineering knowledge and skills with installation experience* Background as a mechanical / Installation engineer / field service / technician (or similar) * Ex-forces engineers welcomed* Live around the Manchester / North West area and happy to travel as a Field Service Engineer
Please contact Charlie Auburn for immediate consideration
Keywords: Installation engineer, Field service engineer, service engineer, engineer, mobile engineer, field engineer, field service, mechanical, electrical, install, garage equipment, REME, Army, Ex forces, Navy, RAF, Wolverhampton, West Mildands,
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
The Service Department is vital to the success of our business. From right first-time fixes, to delivering excellent customer service, our Service Technicians/Mechanics play a pivotal role in delighting our customers and encouraging their continued loyalty.
Every day is different within the Service department. As a Service Technician/Mechanic apprentice, some of your duties will include:
Use of diagnostic equipment to identify vehicle faults
Testing of parts and systems to ensure correct working
Following checklists to ensure all critical parts of vehicles are examined
Carrying out bumper-to-bumper overview, service, and inspection
Maintenance of electronic systems, including on-board entertainment systems
Undertaking repair and maintenance of vehicle parts, including clutches, gearboxes, tyres, brakes, and suspension
Completion of legible and accurate paperwork for the customers and the centre's records
Maintenance of a clean and tidy work environment
You will have the opportunity to work with a wide range of products, including traditional, hybrid and electronic engines. From heritage vehicles to leading-edge modern technology, our range will provide you with a varied technical training experience to build your skills as a Service Technician/Mechanic.
Our ideal candidate will be able to demonstrate skills in logic and problem-solving. You should be someone who pays attention to detail and is committed to completing this three-year training programme.
We are looking for people who are passionate about our industry and our brand. Some of the personal skills that you should think about showing us in your application are:
Enthusiasm and willingness to learn
Teamwork
Strong communication
Customer service
Interest in vehicle engineering
We are looking for an enthusiastic, hardworking individual to join our team and embark on a long-term career, with excellent earnings and progression opportunities once you complete your apprenticeship.Training:Training will be delivered using a combination of virtual classroom, remote learning and face-to-face block release weeks at our state-of-the-art training centre.
Our expert trainers will guide you through the training programme using a combination of e-learning, classroom learning and practical application.
In the workplace, your personal, dedicated mentor will support your continued learning as you apply the skills and knowledge you have gained through the remote sessions and at the Volkswagen Group National Learning Centre.
This is a fully rounded training experience where you will build life skills that last and gain both apprenticeship qualifications and brand certifications. As an apprentice, you will also have the opportunity to attend Outward Bound, a personal development week which supports with developing resilience, confidence, and teamwork skills.
On successful completion of the three-year programme, you will receive the following:
Level 3 Apprenticeship Standard in Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Certificate in Automotive Refrigerant Handling
Brand-specific certifications
Training Outcome:Volkswagen Group (VWG) is one of the UK’s largest car retailers encompassing premium brands such as Audi, Bentley, SEAT, ŠKODA, Volkswagen, TPS, Volkswagen Group Paint and Body and Volkswagen Commercial Vehicles. This network of retailers spans the UK, providing a wide range of career opportunities.
Once your apprenticeship is complete, you will continue your learning journey and you will have the opportunity to drive your career forward. Some of our apprentices have gone on to become team leaders and managers within the retail network or even joined our team at Head Office in Milton Keynes.Employer Description:ŠKODA is driven by something different. What are you driven by? We are looking for ambitious, dynamic, and enthusiastic people to join our apprenticeship programme. If you are customer focused, forward thinking and want to learn, then we can give you the life and technical skills you need to be part of our team.Working Hours :Monday – Friday. 0830 – 1730.
Possibility of Saturday workings and / or shifts.
Working week will be confirmed on application.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
The Service department is vital to the success of our business. From right first-time fixes, to delivering excellent customer service, our Service Technicians/Mechanics play a pivotal role in delighting our customers and encouraging their continued loyalty.
Every day is different within the Service department. As a Service Technician/Mechanic apprentice, some of your duties will include:
Use of diagnostic equipment to identify vehicle faults
Testing of parts and systems to ensure correct working
Following checklists to ensure all critical parts of vehicles are examined
Carrying out bumper to bumper overview, service, and inspection
Maintenance of electronic systems including on- board entertainment systems
Undertaking repair and maintenance of vehicle parts including clutches, gearboxes, tyres, brakes, and suspension
Completion of legible and accurate paperwork for the customers and centres records
Maintenance of a clean and tidy work environment
You will have the opportunity to work with a wide range of products including traditional, hybrid and electronic engines. From heritage vehicles to leading edge modern technology, our range will provide you with a varied technical training experience to build your skills as a Service Technician/Mechanic.
Our ideal candidate will be able to demonstrate skills in logic and problem solving. You should be someone who pays attention to detail and is committed to completing this three year training programme.
We are looking for people who are passionate about our industry and our brand. Some of the personal skills that you should think about showing us in your application are:
Enthusiasm and willingness to learn
Teamwork
Strong communication
Customer Service
Interest in vehicle engineering
We are looking for an enthusiastic, hardworking individual to join our team and embark on a long term career, with excellent earning and progression opportunities once you complete your apprenticeship.Training:Training will be delivered using a combination of virtual classroom remote learning and face-to-face block release weeks at our state-of-the-art training centre.
Our expert trainers will guide you through the training programme using a combination of e-learning, classroom learning and practical application.
In the workplace, your personal, dedicated mentor will support your continued learning as you apply the skills and knowledge you have gained through the remote sessions and at the Volkswagen Group National Learning Centre.
This is a fully rounded training experience where you will build life skills that last and gain both apprenticeship qualifications and brand certifications. As an apprentice, you will also have the opportunity to attend Outward Bound, a personal development week which supports with developing resilience, confidence, and teamwork skills.
On successful completion of the three year programme, you will receive the following:
Level 3 Apprenticeship Standard in Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Certificate in Automotive Refrigerant Handling
Brand specific certifications
Training Outcome:Volkswagen Group (VWG) is one of the UK’s largest car retailers encompassing premium brands such as Audi, Bentley, SEAT, ŠKODA, Volkswagen, TPS, Volkswagen Group Paint and Body and Volkswagen Commercial Vehicles. This network of retailers spans the UK, providing a wide range of career opportunities.
Once your apprenticeship is complete, you will continue your learning journey and you will have the opportunity drive your career forward. Some of our apprentices have gone on to become team leaders and managers within the retail network or even joined our team at Head Office in Milton Keynes.Employer Description:ŠKODA is driven by something different. What are you driven by? We are looking for ambitious, dynamic, and enthusiastic people to join our apprenticeship programme. If you are customer focused, forward thinking and want to learn, then we can give you the life and technical skills you need to be part of our team.Working Hours :Monday– Friday. 0830– 1730.
Possibility of Saturday workings and / or shifts.
Working week will be confirmed on application.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
Eden Tyres are currently seeking a Light Vehicle Technician Apprentice to join their garage .This is an exciting role with first-class training and outstanding long-term career prospects. The comprehensive programme provides you with an exciting and challenging opportunity to achieve formal qualifications through extensive product training as well as building up confidence and gaining valuable work experience whilst undertaking the role.
Duties will include:
Working alongside qualified Technicians with the investigation, repair and service of vehicles
Producing estimates
Carrying out diagnostics
Warranty work
Assisting with MOT’s on vehicles
Other general technical duties and general housekeeping
Providing excellent customer service to internal and external customers
Training:
Candidates will work towards achieving the Light Vehicle Technician Apprenticeship Standard at Level 3
They will also be required to study towards achieving level 2 maths and English functional skills if they do not already hold equivalent qualifications
The programme lasts for 36 months
The training incorporates underpinning knowledge in partnership and managed by EMTEC Colleges. Throughout the duration of the programme the candidates will be expected to travel to EMTEC’s training centre in Nottingham for 24 separate weeks to carry out skills training
Regular visits to the dealership from EMTEC Vocational Learning Advisors will take place, who will observe all evidence opportunities that occur naturally in the workplace
Candidates will be expected to engage in self-directed learning outside of normal working hours, which will be monitored and tracked through an online e-portal
Assessment Includes:
On-going assessment of soft skills and behaviours
A behaviour assessment
Knowledge and understanding tests at the end of Gateway 1 and 2, Skills tests at the end of Gateway 1 and 2
This is followed by the synoptic assessment, of which there are four components:
Log book (final year review to assess apprentice’s progress)
Behaviour Assessment, Knowledge Test (an in-depth, online test exploring knowledge/ understanding of the apprentice)
Skills Test (two-day practical examination of the skills of the apprentice)
Training Outcome:
Possible permanent position on the completion of the apprenticeship
Employer Description:Eden Tyres & Servicing (Eden Tyres Ltd) is a family-founded automotive service provider based in the East Midlands. Since launching its first branch in Derby in 1981, the company has expanded to around 24–25 modern, full-service garages across the region
Known as one of the UK’s largest independent tyre retailers, Eden Tyres also operates a thriving wholesale division—together distributing over 600,000 tyres annually and keeping a vast inventory in stock.
Eden Tyres offers comprehensive services, including tyre fitting (covering everything from budget to premium brands), MOT testing, car servicing, wheel alignment, brakes, air‑conditioning, batteries, diagnostics, exhausts, suspension, and EV/hybrid services.
Their award‑winning approach (including being named Independent Retailer of the Year 2025) emphasizes modern workshops, transparent pricing, and user-friendly features like online booking and mobile tyre fitting.Working Hours :Monday 8:30am- 5:30pm with 1 hour dinner
Tuesday 8:30am- 5:30pm with 1 hour dinner
Wednesday 8:30am -12:30pm
Thursday 8:30am- 5:30pm with 1 hour dinner
Friday 8:30am- 5:30pm with 1 hour dinner
Saturday 8:30am- 12:30pmSkills: Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Logical,Team working,Initiative....Read more...
Eden Tyres are currently seeking a Light Vehicle Technician Apprentice to join their garage .This is an exciting role with first-class training and outstanding long-term career prospects. The comprehensive programme provides you with an exciting and challenging opportunity to achieve formal qualifications through extensive product training as well as building up confidence and gaining valuable work experience whilst undertaking the role.
Duties will include:
Working alongside qualified Technicians with the investigation, repair and service of vehicles
Producing estimates
Carrying out diagnostics
Warranty work
Assisting with MOT’s on vehicles
Other general technical duties and general housekeeping
Providing excellent customer service to internal and external customers
Training:
Candidates will work towards achieving the Light Vehicle Technician Apprenticeship Standard at Level 3
They will also be required to study towards achieving level 2 maths and English functional skills if they do not already hold equivalent qualifications
The programme lasts for 36 months
The training incorporates underpinning knowledge in partnership and managed by EMTEC Colleges. Throughout the duration of the programme the candidates will be expected to travel to EMTEC’s training centre in Nottingham for 24 separate weeks to carry out skills training
Regular visits to the dealership from EMTEC Vocational Learning Advisors will take place, who will observe all evidence opportunities that occur naturally in the workplace
Candidates will be expected to engage in self-directed learning outside of normal working hours, which will be monitored and tracked through an online e-portal
Assessment Includes:
On-going assessment of soft skills and behaviours
A behaviour assessment
Knowledge and understanding tests at the end of Gateway 1 and 2, Skills tests at the end of Gateway 1 and 2
This is followed by the synoptic assessment, of which there are four components:
Log book (final year review to assess apprentice’s progress)
Behaviour Assessment, Knowledge Test (an in-depth, online test exploring knowledge/understanding of the apprentice)
Skills Test (two-day practical examination of the skills of the apprentice)
Training Outcome:Possible permanent position on the completion of the apprenticeship.Employer Description:Eden Tyres & Servicing (Eden Tyres Ltd) is a family-founded automotive service provider based in the East Midlands. Since launching its first branch in Derby in 1981, the company has expanded to around 24–25 modern, full-service garages across the region
Known as one of the UK’s largest independent tyre retailers, Eden Tyres also operates a thriving wholesale division—together distributing over 600,000 tyres annually and keeping a vast inventory in stock.
Eden Tyres offers comprehensive services, including tyre fitting (covering everything from budget to premium brands), MOT testing, car servicing, wheel alignment, brakes, air‑conditioning, batteries, diagnostics, exhausts, suspension, and EV/hybrid services.
Their award‑winning approach (including being named Independent Retailer of the Year 2025) emphasizes modern workshops, transparent pricing, and user-friendly features like online booking and mobile tyre fitting.Working Hours :Monday 8:30am - 5:30pm with 1-hour dinner
Tuesday 8:30am - 5:30pm with 1-hour dinner
Wednesday 8:30am -12:30pm
Thursday 8:30am 5:30pm with 1-hour dinner
Friday 8:30am - 5:30pm with 1-hour dinner
Saturday 8:30am - 12:30pmSkills: Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Logical,Team working,Initiative....Read more...
