An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
Job Title: Fabric Engineer (Carpentry Background – Fire Door Focus) Location: Central London (covering 4 commercial sites)Salary: £40,000 – £45,000 per annumEmployment Type: Full-time, Permanent Company Overview CBW are proud to be working with a leading facilities management company that delivers and maintains a wide range of engineering and building services across the commercial sector throughout London, the South, and the North regions. Due to continued growth and project demand, they are seeking a Fabric Engineer with a strong carpentry background to join their team, working across several prestigious commercial sites in Central London. Role Overview As a Fabric Engineer, you will be responsible for carrying out a variety of building fabric maintenance and repair works, with a particular focus on fire door installation and remedial work. You’ll ensure all carpentry and associated tasks meet compliance, safety, and quality standards in line with BM TRADA and company procedures. Key ResponsibilitiesCarry out building fabric maintenance and remedial works across 4 commercial sites in Central London.Install, repair, and adjust fire doors in line with BM TRADA standards.Inspect and identify any faults, damage, or non-compliance on existing doors and other joinery elements.Complete documentation and compliance reports accurately.Support site managers and liaise with clients to ensure smooth delivery of works.Maintain high standards of health and safety across all tasks.Undertake general carpentry and other minor building fabric duties as required.RequirementsProven experience as a Fabric Engineer or Carpenter within the commercial or FM sector.Experience installing and repairing fire doors (BM TRADA knowledge desirable).Broad understanding of building fabric maintenance.Strong communication and reporting skills.CSCS card and relevant trade qualifications preferred.Reliable, detail-oriented, and confident working independently across multiple sites.Package & BenefitsSalary: £40,000 – £45,000 per annum (depending on experience)Ongoing training and development opportunitiesWork with an established FM provider on prestigious commercial contracts....Read more...
Junior Maintenance Engineer (Electrical or Mechanical) - FM Service Provider - Commercial Building - City of London- £35,000 - £40,000Are you looking for a way into maintenance?Are you looking for a role in Central London?Are you electrically or mechanically qualified?If the answer is yes, then read on....An exciting opportunity to join an established building services company based in London has arisen! CBW Staffing Solutions are currently recruiting a Junior Maintenance Engineer either of an electrical, mechanical, or plumbing background, to be based in a commercial building in the City of London. He or she or they will be required to carry out planned and reactive building maintenance alongside the maintenance team on site. This person will be working closely with a senior member of the team and the team on-site to gain experience and training of building services.The successful candidate will understand Facilities Maintenance and have some experience in building maintenance. In return, the company is offering a competitive salary of up to £40,000, overtime, plenty of further training and a potential route into further career progression. Hours of workMonday to Friday – 08:00 am to 17:00 pm25 days holiday + Bank holidaysOvertime availableFurther trainingCompany pensionKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 3 or mechanically City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceHard working attitudeGood communication skillsClient FacingIf you are interested please email your CV to Alex Denton of CBW Staffing Solutions....Read more...
Electrical Maintenance Engineer | Famous Historical Venue, South Kensington | Client Direct | £53,400 CBW is currently recruiting for an Electrically qualified Electrical Maintenance Engineer to work in house at a flagship historical venue in South Kensington. The ideal candidate will carry out daily plant room checks whilst helping to maintain the buildings electrical services and support the maintenance of mechanical plant services. This position would be ideal for an Electrical Maintenance Engineer currently in a similar position. In return, the company is offering a competitive salary of £53,400. This will be working client direct for one of the most attractive, growing businesses in the UK building services industry. Technical duties will include:Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters. Working hours:4 on, 4 off (2 earlies, 2 lates, 4 off then repeat)07:00-17:30 (earlies), 16:00-02:00 (lates)Cab home on late shift (must live within M25)Package:£53,400 salary22 shift days holidayMedical InsuranceFree meal on shiftCar parking on late shift / weekendGood pension contributionSeason Ticket LoanCycle to work schemeChildcare vouchersTravel insuranceHealth checksA lot of progression availableAnnual pay review Requirements:Experience working in commercial building servicesElectrically qualified City & Guilds Level 3 or equivalentTesting & Inspection18th Edition if electrically qualified Apprentice trained - Desired not essentialAble to work the hours advertisedExperience working within both landlord and tenant area's of a commercial premises are preferable. Please send your CV to Fin Havering - Cbw Staffing Solutions for more Information!....Read more...
Shift Engineer – 4 on 4 off shift - Commercial building – Liverpool Street, London – £45,000 Per annumExciting opportunity to work for an established FM Property company based in London. CBW is currently recruiting for a shift engineer to be based at a commercial building in Liverpool Street, London. The successful candidate will be a fully qualified mechanical engineer or electrical engineer with a proven track record in commercial/property building maintenance, and be able to turn their hand to a variety of maintenance tasks. He or she will be required to carry out mechanical/electrical planned and reactive maintenance across this large commercial building. Working with the maintenance team on site. He or she will be required to have an understanding/hands-on experience of the below. In return, the company offers a competitive salary, further training, overtime and the chance to work at this unique and interesting site.Package & Hours of Work£45,0004 on 4 off days only 07:00 - 19:00Uniform and Tools ProvidedCycle to work scheme20 days holiday + Bank holidays Overtime AvailablePensionInternal Progression & DevelopmentKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsWater flushing / temp checks logsBoosted water pumpsEnsure that the Contractual efficiently meets all the relevant KPI & SLA requirements.Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.RequirementsElectrically or mechanically qualified - Level 2 or 3 (C&G, NVQ, EAL ect)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf you are interested, please send a copy of your CV to Alex Denton of CBW Staffing Solutions....Read more...
Shift Engineer – 4 on 4 off day shift - Commercial building – Heathrow, Greater London – £44,000 Per annumExciting opportunity to work for an established FM Property company based in London. CBW is currently recruiting for a shift engineer to be based at a commercial building in Heathrow. The successful candidate will be a fully qualified mechanical engineer or electrical engineer with a proven track record in commercial/property building maintenance, and be able to turn their hand to a variety of maintenance tasks. He or she will be required to carry out mechanical/electrical planned and reactive maintenance across this large commercial building. Working with the maintenance team on site. He or she will be required to have an understanding/hands-on experience of the below. In return, the company offers a competitive salary, further training, overtime and the chance to work at this unique and interesting site.Package & Hours of Work£44,0004 on 4 off days and nights 06:30 - 18:30 Uniform and Tools ProvidedCycle to work scheme22 days holidayLots of overtime availablePensionInternal Progression & DevelopmentKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsWater flushing / temp checks logsBoosted water pumpsEnsure that the Contractual efficiently meets all the relevant KPI & SLA requirements.Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency. RequirementsElectrically or mechanically qualified - Level 2 or 3 (C&G, NVQ, EAL ect)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf you are interested, please send a copy of your CV to Alex Denton of CBW Staffing Solutions....Read more...
Night Shift Engineer – 4 on 4 off Nights - Commercial building – Heathrow, Greater London – £44,000 Per annumExciting opportunity to work for an established FM Property company based in London. CBW is currently recruiting for a night shift engineer to be based at a commercial building in Heathrow. The successful candidate will be a fully qualified mechanical engineer or electrical engineer with a proven track record in commercial/property building maintenance, and be able to turn their hand to a variety of maintenance tasks. He or she will be required to carry out mechanical/electrical planned and reactive maintenance across this large commercial building. Working with the maintenance team on site. He or she will be required to have an understanding/hands-on experience of the below. In return, the company offers a competitive salary, further training, overtime and the chance to work at this unique and interesting site.Package & Hours of Work£44,0004 on 4 off nights 18:30 - 06:30 Uniform and Tools ProvidedCycle to work scheme22 days holidayLots of overtime availablePensionInternal Progression & DevelopmentKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsWater flushing / temp checks logsBoosted water pumpsEnsure that the Contractual efficiently meets all the relevant KPI & SLA requirements.Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency. RequirementsElectrically or mechanically qualified - Level 2 or 3 (C&G, NVQ, EAL ect)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf you are interested, please send a copy of your CV to Alex Denton of CBW Staffing Solutions....Read more...
Electrical Shift Engineer – FM Service Provider – Westminster, London - Ongoing temp - Shift Days and Nights CBW Staffing Solutions is currently recruiting for an Electrical Maintenance Engineer to join an established building services company based in Westminster, London. These roles are situated within a commercial office environment, where you will be responsible for carrying out both planned and reactive maintenance as part of an experienced maintenance team. Vacancy Shift - Days and Nights Hours: 07:00 – 19:00 / 19:00 - 07:00Ongoing temp£25 per hour Key ResponsibilitiesSmall electrical installations, fault-finding, and lighting maintenanceEmergency lighting testingControl panel maintenanceReplacing ballastsMonitoring the BMS (Building Management System) for heating and cooling systemsGeneral M&E and fabric maintenanceLogbook updates and compliance reportingBasic plumbing tasks (e.g. unblocking toilets)Maintenance of pumps, motors, and other building systemsRequirementsCity & Guilds Level 2 & 3 in Electrical Installations18th Edition qualificationAbility to provide copies of relevant trade certificatesProven experience in commercial building maintenanceMulti-skilled with a proactive, hands-on approachStrong communication skills and client-facing experience To apply, please send an up-to-date copy of your CV to Cammie@cbwstaffingsolutions.com for more information.....Read more...
An opportunity has arisen for aHeating Engineer / Gas Engineer to join a reputable facilities management and building services provider, recognised for delivering reliable and compliant mechanical and electrical solutions.
As a Heating Engineer / Gas Engineer, you will be carrying out a variety of planned and reactive maintenance tasks across multiple commercial and domestic sites, ensuring all work is delivered safely and to high standards.
This full-time permanent role offers a salary of Up to £50,000 plus overtime, on-call allowance and benefits. Must have all Gas Certificates / Qualifications as the majority of work is within Schools, Hospitals, MOD sites, Local Authorities etc.
You will be responsible for:
? Undertaking plumbing, heating and gas maintenance, installations and repairs
? Delivering planned preventative maintenance (PPM) and reactive works across client sites
? Diagnosing faults and carrying out remedial works on a range of commercial systems
? Installing pipework, valves, water heaters, and other plumbing equipment
? Commissioning and testing hot water and heating systems to ensure compliance
? Supporting refurbishment projects such as washroom or catering area upgrades
? Maintaining accurate digital records of all completed works
? Working closely with other mechanical and electrical teams to deliver integrated solutions
What we are looking for
? Previously worked as a Gas Engineer, Commercial Gas Engineer, Plumbing and Heating Engineer, Gas Service Engineer, Heating Engineer, Gas and Heating Engineer, Gas Safe Engineer, Plumber, Plumbing Engineer or in a similar role.
? Have at least 2 years of experience
? Ideally have experience in both Gas & plumbing
? NVQ Level 2 or 3 in Plumbing or a related Mechanical discipline
? Current Commercial and Domestic Gas Certifications (CCN1, CENWAT, CODNCO1, CDGA1, CIGA1)
? G3 certification for Unvented Hot Water Systems
? Awareness (or competence) in Electrical Safety
? ....Read more...
An opportunity has arisen for a Commercial Gas Engineer to join a reputable facilities management and building services provider, recognised for delivering reliable and compliant mechanical and electrical solutions.
As a Commercial Gas Engineer, you will be carrying out a variety of planned and reactive maintenance tasks across multiple commercial and domestic sites, ensuring all work is delivered safely and to high standards.
This full-time permanent role offers a salary of Up to £50,000 plus overtime, on-call allowance and benefits. Must have all Gas Certificates / Qualifications as the majority of work is within Schools, Hospitals, MOD sites, Local Authorities etc.
You will be responsible for:
? Undertaking plumbing, heating and gas maintenance, installations and repairs
? Delivering planned preventative maintenance (PPM) and reactive works across client sites
? Diagnosing faults and carrying out remedial works on a range of commercial systems
? Installing pipework, valves, water heaters, and other plumbing equipment
? Commissioning and testing hot water and heating systems to ensure compliance
? Supporting refurbishment projects such as washroom or catering area upgrades
? Maintaining accurate digital records of all completed works
? Working closely with other mechanical and electrical teams to deliver integrated solutions
What we are looking for
? Previously worked as a Gas Engineer, Commercial Gas Engineer, Plumbing and Heating Engineer, Gas Service Engineer, Heating Engineer, Gas and Heating Engineer, Gas Safe Engineer, Plumber, Plumbing Engineer or in a similar role.
? Have at least 2 years of experience
? Ideally have experience in both Gas & plumbing
? NVQ Level 2 or 3 in Plumbing or a related Mechanical discipline
? Current Commercial and Domestic Gas Certifications (CCN1, CENWAT, CODNCO1, CDGA1, CIGA1)
? G3 certification for Unvented Hot Water Systems
? Awareness (or competence) in Electrical Safety
? Full UK Driving....Read more...
An opportunity has arisen for a Plumbing and Heating Engineer to join a reputable facilities management and building services provider, recognised for delivering reliable and compliant mechanical and electrical solutions.
As a Plumbing and Heating Engineer, you will be carrying out a variety of planned and reactive maintenance tasks across multiple commercial and domestic sites, ensuring all work is delivered safely and to high standards.
This full-time permanent role offers a salary of Up to £50,000 plus overtime, on-call allowance and benefits. Must have all Gas Certificates / Qualifications as the majority of work is within Schools, Hospitals, MOD sites, Local Authorities etc.
You will be responsible for:
? Undertaking plumbing, heating and gas maintenance, installations and repairs
? Delivering planned preventative maintenance (PPM) and reactive works across client sites
? Diagnosing faults and carrying out remedial works on a range of commercial systems
? Installing pipework, valves, water heaters, and other plumbing equipment
? Commissioning and testing hot water and heating systems to ensure compliance
? Supporting refurbishment projects such as washroom or catering area upgrades
? Maintaining accurate digital records of all completed works
? Working closely with other mechanical and electrical teams to deliver integrated solutions
What we are looking for
? Previously worked as a Gas Engineer, Commercial Gas Engineer, Plumbing and Heating Engineer, Gas Service Engineer, Heating Engineer, Gas and Heating Engineer, Gas Safe Engineer, Plumber, Plumbing Engineer or in a similar role.
? Have at least 2 years of experience
? Ideally have experience in both Gas & plumbing
? NVQ Level 2 or 3 in Plumbing or a related Mechanical discipline
? Current Commercial and Domestic Gas Certifications (CCN1, CENWAT, CODNCO1, CDGA1, CIGA1)
? G3 certification for Unvented Hot Water Systems
? Awareness (or competence) in Electrical Safety
? Ful....Read more...
