JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: To support the Engineering team in the preparation of drawings, schedules, and design documents for HVAC restoration projects. The Mechanical Drafter translates field data and engineering input into accurate drawings, helping to develop drafting standards, templates, and tools that improve project delivery and efficiency.
ESSENTIAL DUTIES AND RESPONSIBILITIES: List the job's essential or principal functions and responsibilities. Include all critical aspects of the job -- whether performed daily, weekly, monthly, or annually; and any that occur at irregular intervals.
Supports the Design Engineer in the production of mechanical engineering drawings for HVAC restoration projects according to established standards for clarity, accuracy, and consistency. Reads and interprets technical drawings, schematics, field sketches, test and balance data, and engineer input to generate construction drawings and project schedules. Draft plans, details, and schedules, including fan arrays, equipment layouts, responsibility matrices, and other project-specific deliverables. Creates, maintains, and improves drafting resources such as CAD blocks, templates, title blocks, sheet setups, and detail libraries. Revises drawings based on feedback from engineers, project managers, and clients. Supports drafting automation efforts, including data-linked schedules and fillable data plates for air handler restorations. Incorporates applicable codes and standards (ASHRAE, NCS, etc.) into drafting practices. Coordinates with Field Engineers to clarify and standardize field sketch requirements. Organizes and manages digital project files across platforms (SharePoint, Bluebeam, Smartsheet) to support consistent project delivery. Completes assigned drafting tasks on multiple projects simultaneously within required deadlines.
CERTIFICATES, LICENSES, REGISTRATIONS: List the licenses, certificates, and registrations required to perform the essential duties.
Associate's degree in Computer-Aided Drafting or similar (preferred). Industry certifications in drafting, AutoCAD, or Revit (preferred but not required). Valid driver's license and ability to travel occasionally to project sites. OTHER SKILLS AND ABILITIES:
1-3 years of CAD production experience in the design or construction industry (or equivalent academic training). Experience with construction drafting in AutoCAD; Autodesk Revit experience preferred. Basic knowledge of HVAC systems and mechanical components. Proficiency in Microsoft Office Suite (Word, Excel, Outlook). Familiarity with collaboration tools such as Bluebeam, SharePoint, or Smartsheet is preferred. Strong organizational skills and the ability to manage multiple tasks and projects simultaneously. Effective communication and collaboration skills to work across engineers, project managers, and field staff. Self-motivated, detail-oriented, and capable of working both independently and in a team setting. Ability to travel out of state up to 15% of the time. Apply for this ad Online!....Read more...
Snr AV Creative Solutions Architect – This is a newly created position working for a leading company who specializes in the highest end of the custom installation marketplace. They are seeking a client facing creative design architect who comes with an innate understanding of bespoke AV solutions. You will work closely with the end-user client as their main point of contact within the company. You will be able to create first-class sales presentation documents for both pre-sales and post sales. You will be a technically savvy individual who understands the full life cycle of the integration process. Ideally the client would like you to come from an AV installation or AV design background and who enjoys taking the client through the process of turning an empty shell into a world of wonder. The role will require you to present the solution in all its glory to the client in order to get final sign and close the deal. If this has whetted your appetite then please feel free to send me your full CV, previous examples of sales documentation might be requested for this position.
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV
AV A-V A/V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL SOUND AUDIO LIGHTING SALES PRESENTATION PRE-SALES PRESALES POST-SALES ARCHITECT SOLUTION SYSTEM DESIGN AUTOCAD CAD RIBA CI CUSTOM INSTALLATION CRESTRON LUTRON DALI CEDIA SMARTHOME AUTOMATION KENT LONDON....Read more...
An exciting opportunity has arisen for a Mechanical Design Engineer to join one of the leading companies in RF and sensing technology, based in Essex.
Part of a globally recognised organisation, this company is driving innovation across the medical, aerospace, and defence industries. Their expertise has contributed to world-class projects such as the Hubble Space Telescope, cancer radiotherapy systems, and advanced driver-assistance technologies in luxury vehicles.
They are seeking a Mechanical Design Engineer to join their Essex based R&D division, supporting the design and development of cutting-edge new products. This role is ideal for an engineer with several years of experience who enjoys hands-on design work, solving complex challenges, and collaborating within a multidisciplinary team.
Key Responsibilities
Support the mechanical design and development of products from concept through to manufacture.
Produce and maintain technical documentation, including drawings, models, and reports.
Participate in design reviews and assist in resolving engineering challenges alongside senior engineers.
Work closely with process, project, and manufacturing engineers to ensure designs meet performance, cost, and reliability targets.
Contribute ideas for process improvement and new product development.
Desirable Experience
Degree-qualified in Mechanical Engineering or a related discipline.
Proficiency in 3D CAD (e.G. SolidWorks, Creo, or similar).
Understanding of materials selection, mechanical systems, and manufacturing processes.
Experience with FEA or tolerance analysis is advantageous.
Strong problem-solving and teamwork skills.
Keen to learn, develop, and take ownership of your projects.
Due to the nature of the work, our client is unable to offer sponsorship — UK working rights are required.
This is an excellent opportunity for an Essex based Mechanical Design Engineer looking to take the next step in their career working on advanced technology and contributing to high-impact, real-world applications.
Apply Now: Please send your CV to KGraveney@redlinegroup.Com or contact Kyle Graveney on 01582 878817 / 07961 158774 for more information.....Read more...
Snr AV Systems Designer – This is new position that is looking for a tried and tested Corporate / Commercial AV Systems Designer. You will need to have a min of 6years in the use of AutoCAD to design AV systems, AV schematics, AV rack layout and elevations / room layout. If you have any experience with 3D modelling or BIMM / Revit please make sure this is clear on your CV,.Projects will range from £250k into the millions, so previous experience on large scale projects is a must. The systems will be installed either the Corporate, Hospitality or MDU marketplace. Due to the technical nature of this role, you must have a technical AV background that brings skills and knowledge of Crestron control, Lutron lighting, AV related networks and switching, along with audio solutions and large scale videowall deployments. If you have the relevant skills and experience, please send your full CV ASAP.
AV A/V A-V AUDIOVISUAL AUDIO/VISUAL AUDIO-VISUAL AUTOCAD CAD DESIGN SYSTEMS SOLITUINS RACK CRESTRON LUTRON EXTRON NETWORK LIGHTING SOUND AUTOMATION CONTROL VC VIDEOCONFERENCE MTR TEAMS CORPORATE COMMERICAL HERTS HERTFORDSHIRE BERKS BERKSHIRE BUCKS BUCKINHAMSHIRE
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV....Read more...
An exciting opportunity has arisen for a Lead Product Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Lead Product Engineer role, based in Great Yarmouth, Norfolk, will be to lead microelectronic product portfolios for both New Product Introduction (NPI) and Legacy product lines. They will be working with customers on product requirements, manage change requests and documentation and component obsolescence.
Some of the key experiences and competencies for the Lead Product Engineer, based in Great Yarmouth, Norfolk will be to work to aerospace / defence standards ideally within a microelectronic product line. Packaging experience with customer designs will be beneficial along with an understanding of mechanical CAD design principles.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Lead Product Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1299. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
DFM Engineer – Design for Manufacturing – Medical Devices - Cambridge
An exciting opportunity awaits you to join a rapidly growing Medical Devices division and contribute to the development of innovative Medical Technologies. We are seeking a Senior or Principal Design Engineer who has previously worked as a hands on engineer, potentially as a Manufacturing Engineer, while working on Design of Manufacturing (DFM) within the Medical Devices, Biotechnology or Sciences industries.
Ideally, you will have a degree in manufacturing, mechanical or process engineering, while having Manufacturing, Design or Process Engineering experience designing in 3D CAD while also having a background in maintaining production machinery.
You will support design teams across multiple functions, with a particular focus on Design for Manufacturing (DFM). The role involves building prototypes and testing new rigs to ensure medical devices function correctly and can be manufactured efficiently. Supply Chain experience would be highly advantageous.
Given the size of the group, we need someone willing to engage in designing, building, and testing systems, as well as maintaining production machinery. As the group expands, this role will evolve, providing excellent opportunities for career advancement.
You will be expected to take leadership of various projects as they arise, whilst also collaborating effectively within teams depends on project requirements.
Due to working alongside other Medical Devices divisions, it is expected that you would have knowledge of ISO 13485, QMS and GMP.
In return, you will receive an excellent starting salary, free lunches, enhanced pension, bonuses, healthcare and other excellent benefits you’d expect with a much larger organisation.
Given the high demand for Medical Devices opportunities, we anticipate significant interest in this role. If you are interested, we recommend submitting your application promptly to avoid missing out.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Leading designer and manufacturer of advanced electronic control systems and components for the automotive industry. We are seeking an experienced CNC Programmer. In this role, you will be responsible for creating, modifying, and optimizing CNC programs for manufacturing processes.
Key Responsibilities
Develop and optimise CNC programs for multi-axis machines to produce high-precision components.
Collaborate with the design and engineering teams to interpret technical drawings and ensure manufacturing feasibility.
Perform tool path simulations to ensure accuracy and identify potential issues before production.
Set up and troubleshoot CNC machines, ensuring proper tooling and fixturing.
Monitor production processes to maintain quality standards and improve efficiency.
Key Requirements
Proven experience as a CNC Programmer, preferably in the automotive or ancillary industries.
Strong knowledge of CNC machine setup, tooling, and programming ( G-code, CAM software).
Proficiency in reading and interpreting technical drawings and blueprints.
Familiarity with multi-axis machining and experience with CAD/CAM software....Read more...
Leading designer and manufacturer of advanced electronic control systems and components for the automotive industry. We are seeking an experienced CNC Programmer. In this role, you will be responsible for creating, modifying, and optimizing CNC programs for manufacturing processes.
Key Responsibilities
Develop and optimise CNC programs for multi-axis machines to produce high-precision components.
Collaborate with the design and engineering teams to interpret technical drawings and ensure manufacturing feasibility.
Perform tool path simulations to ensure accuracy and identify potential issues before production.
Set up and troubleshoot CNC machines, ensuring proper tooling and fixturing.
Monitor production processes to maintain quality standards and improve efficiency.
Key Requirements
Proven experience as a CNC Programmer, preferably in the automotive or ancillary industries.
Strong knowledge of CNC machine setup, tooling, and programming ( G-code, CAM software).
Proficiency in reading and interpreting technical drawings and blueprints.
Familiarity with multi-axis machining and experience with CAD/CAM software....Read more...
Electrical Test and Production Engineer
Location: Horsham
Salary: £34,000 - £37,000 per annum (DOE)
Working Hours: 37.5 hours/week - with early finish on Fridays
An exciting opportunity is available for a Electrical Test and Production Engineer to join our clients advanced manufacturing team. This role focuses on the design and development of test equipment, supporting in-process testing, creating test plans, and providing technical support to optimise production processes and resolve technical issues.
Key Responsibilities
- Serve as a technical bridge between Engineering and Production, improving build quality and minimising rework through effective in-process testing
- Deliver electrical and test support to address production issues and reduce delays
- Design and develop test rigs, fixtures, and equipment, supporting their selection and procurement
- Develop and coordinate robust test plans/procedures to ensure products meet customer and regulatory requirements
- Contribute to process improvement and continuous improvement initiatives across production operations
- Perform fault finding on electromechanical equipment, identify root causes, and implement resolutions
- Support quality functions with inspection and investigation activities
- Assist with budget preparation and expense monitoring
- Facilitate staff training and knowledge transfer within production teams
- Occasional travel for customer support, troubleshooting, and issue resolution
- Maintain strict adherence to health & safety and quality regulations
Requirements Essential
- At least 5 years experience in an engineering/test environment
- Strong technical expertise in testing electrical/electromechanical products
- Competence in reading wiring diagrams and PCB schematics
- Excellent IT skills and effective communication, both written and verbal
- BTEC or Equivalent
Desirable
- Experience mentoring, supervising, or leading staff
- Knowledge of LabVIEW, PLC programming, and CAD design tools
- Familiarity with digital camera and video protocols
Security Clearance: Applicants must be eligible for UK Security Clearance, requiring UK residency for at least five years, identity verification, and employment history checks.....Read more...
Dive into the hands-on world of Civil Engineering design. You’ll be producing detailed drawings and technical models for crucial infrastructure projects, including state-of-the-art clean and wastewater treatment works, high-capacity pumping stations, and resilient pipeline networks.
You'll be trained to master powerful industry software such as Computer Aided Design (CAD), especially AutoCAD Civil 3D, and GIS (Geographic Information Systems) to accurately map, model, and visualize solutions. Training:Coventry University - Block ReleaseTraining Outcome:Civil Engineer, Project Management Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday to FridaySkills: Communication skills,Problem solving skills,Team working....Read more...
Audio Visual (AV) Systems Designers - Are you an audiovisual systems designer with Technical, design and great AutoCAD skills - If so then read on. You will have 4-6 years av design and will be working from the initial sales brief to create final drawings for approval. You must be a personable person who has excellent team working ability in order to create bespoke systems for clients. The client are medium sized specialist av systems integrator who specialise in high end residential AV projects and due to growth require a new member of the team. Ideally you will have AutoCAD design skills along with a technical / design background from within the audio visual industry where you have good knowledge of Crestron, Lutron, Networking / switching, AV Racks, home cinema and fibre wiring, screens / projector, IT Home Networking switching. If this is you then send me your full CV ASAPONLY CANDIDATES IN THE UK AND ALLOWED TO WORK HERE LEGALLY NEED APPLY. MUST HAVE AV EXPERIENCEAUTOCAD CAD SYSTEMS ESTIMATOR INTEGRATION DESIGN ELEVATIONS SCHEMATIC LAYOUT CRESTRON LUTRON CONTROL4 NETWORK CEDIA CINEMA BESPOKE HOME AUTOMATION SMARTHOME AV A-V A/V AUDIO VISUAL AUDIO-VISUAL AUDIOVISUAL RESIDENTIAL LONDON ....Read more...
Our Client, a major Rail, Highways, Power and Tunnels consultancy are seeking a highly skilled and experienced Senior Electrical Engineer to join their dynamic team. You will provide electrical engineering support and leadership across projects, from design through to completion, ensuring compliance with HSE, quality, and commercial standards. This is an exciting opportunity to work on high-profile projects within a fast-paced and challenging environment.
KEY RESPONSIBILITIES:
* Lead electrical engineering activities across all project stages, including tendering, design, installation, testing, commissioning, and handover
* Manage and supervise a multidisciplinary team of engineers, designers, and BIM/CAD technicians
* Deliver high- and low-voltage electrical designs (up to 33kV) in line with safety, sustainability, and regulatory standards
* Design systems such as lighting, cable management systems (CMS), earthing and bonding, UPS, switchboards/LVAC, VSDs, and lightning protection
* Utilise electrical design software (e.g., Prodesign-Amtech) and perform formal design reviews for accuracy and buildability
Collaborate on PLC control systems, including SCADA and BMS, and contribute to HAZID, HAZOP, and HAZCON studies
* Manage project documentation, including design registers, meeting minutes, and RFI/TQ responses
* Liaise with installation teams to ensure designs meet construction requirements and resolve any issues
* Support tendering processes by developing scope documents and collaborating with manufacturers to determine product suitability.- Ensure project progress aligns with programme schedules and provide technical solutions to project challenges
* Track design changes and ensure compliance with quality and safety standards.
TECHNICAL KNOWLEDGE AND SKILLS:
* In-depth knowledge of electrical installations, legislation, and design standards
* Proficiency in electrical design packages (Amtech/Trimble, Cymap) and AutoCAD/Microstation.
* Experience with low- to medium-voltage systems.- Strong MS Office skills (Excel).-Knowledge of sustainability principles.
* Experience with Revit (or equivalent BIM software) - desired
* Knowledge of ATEX and DSEAR standards - desired
* Familiarity with project planning software (P6 or MS Project)- desired
QUALIFICATIONS:
* HND in Electrical Engineering.- Chartered Engineer (CEng) status with a recognised institution (CIBSE, IET, or equivalent)
* SMSTS and CSCS card
* Full UK driving license.
* Degree in Electrical Engineering
* Project management qualifications (APM, PRINCE2)
* NEBOSH Construction Certificate.
COMPETENCIES:
* Strong leadership, communication, and people management skills
* Ability to work under pressure and make decisive decisions
* Collaborative and adaptable in a fast-paced environment
* Forward-thinking with a proactive approach to problem-solving
EXPERIENCE:
* At least seven years in a Senior/Principal Electrical Engineering role
* Experience in infrastructure projects, utilities, or civils.
* Experience working with M&E contractors.
If you are interested in this job, please send over your cv and get in touch with Jamie at Unity Recruitment. Alternatively if you know anyone who might be interested in this job opportunity, please send over for a referral fee.....Read more...
An exciting opportunity has arisen for a Principal Mechanical Design Engineer to join one of the leading companies in RF and Sensing technology, based in Essex.
Part of a globally recognised organisation, this company is shaping innovation across the medical, aerospace, and defence industries. Their expertise has contributed to world-class projects such as the Hubble Space Telescope, cancer radiotherapy machines, and advanced driver-assistance systems in luxury vehicles.
They are seeking a Principal Mechanical Design Engineer to join their R&D division. This role will be instrumental in developing new products and driving the next phase of the company’s growth.
The position requires someone hands-on, adaptable in day-to-day tasks, and keen to work collaboratively with the mechanical engineering team lead, process engineers, project lead engineers, and project managers.
Key responsibilities for this Principal Mechanical Design Engineer role based in Essex:
Lead mechanical design and development, from customer specifications through to delivery of high-quality, on-time solutions
Produce and maintain technical documentation, including drawings, test plans, and reports
Contribute to design reviews and resolve technical challenges in collaboration with process engineers
Identify risks and deliver robust, independent solutions
Stay up to date with new technologies and support process development and industrialisation
Desirable Experience for this Principal Mechanical Design Engineer role based in Essex:
Degree qualified Engineer
Proficiency in CAD and FEA analysis
Strong knowledge of materials, manufacturing processes, and mechanical systems
Excellent problem-solving, critical thinking, and creativity skills
Effective communicator and collaborative team player
Proven project leadership with consistent, high-quality results
Due to the nature of the sector our client is unable to offer a sponsorship, so UK working rights are required.
This role offers the chance to shape the next generation of products at the forefront of advanced technology. Whether you are a Senior Engineer seeking a fresh challenge or an Engineer with several years of experience looking to step up, this is an exciting career opportunity.
Apply Now: Please send your CV to KGraveney@redlinegroup.Com or contact Kyle Graveney at 01582 878817 / 07961 158774 for more information.....Read more...
We are seeking an experienced Draughtsman with a background in structural steel and architectural metalwork. This is a permanent, office-based position with occasional site visits and surveys required.Salary: £40,000 per annum Start Date: ASAPDuties and Responsibilities:
Produce accurate and detailed fabrication and general arrangement drawings using AutoCAD.
Work on a variety of structural steel and architectural metalwork projects including staircases, balustrades, platforms, and secondary steel.
Conduct site visits and surveys to collect accurate measurements and verify design details.
Liaise closely with project managers, engineers, and fabricators to ensure designs meet project specifications and deadlines.
Review and modify drawings as needed to incorporate design changes or client feedback.
Ensure all drawings comply with relevant standards, health and safety requirements, and company quality procedures.
Maintain drawing records and assist with documentation for fabrication and installation.
Requirements:
Proven experience in drafting for structural steel and architectural metalwork.
Proficient in AutoCAD (knowledge of other CAD software advantageous).
Strong attention to detail and accuracy in producing technical drawings.
Ability to interpret and understand engineering and fabrication drawings.
Willingness to carry out occasional site visits and surveys.
Excellent communication and teamwork skills.
Interested applicants are invited to apply by sending their most up-to-date CV.....Read more...
Audio Visual (AV) Systems Designers - Are you an audiovisual systems designer with Technical, design and great AutoCAD skills - If so then read on. You will have 3-5 years av design and will be working from the initial sales brief to create final drawings for approval. You must be a personable person who has excellent team working ability in order to create bespoke systems for clients. The client are medium sized specialist av systems integrator who specialise in high end residential AV projects and due to growth require a new member of the team. Ideally you will have AutoCAD design skills along with a technical/design background from within the audio visual industry where you have good knowledge of Crestron, Lutron, Networking / switching, AV Racks, home cinema and fibre wiring, screens / projector, IT Home Networking switching. If this is you then send me your full CV ASAPONLY CANDIDATES IN THE UK AND ALLOWED TO WORK HERE LEGALLY NEED APPLY. MUST HAVE AV EXPERIENCEAUTOCAD CAD SYSTEMS INTEGRATION DESIGN ELEVATIONS SCHEMATIC LAYOUT SCHEME CRESTRON LUTRON DALI NETWORK CEDIA CINEMA BESPOKE HOME AUTOMATION SMARTHOME AV A-V A/V AUDIO VISUAL AUDIO-VISUAL AUDIOVISUAL RESIDENTIAL LONDON MIDDX MIDDLESEX ESSEX HERTS HERTFORDSHIRE....Read more...
An exciting opportunity has arisen for a BIM Technician to join a well-established consultancy firm, focusing on diverse building services across multiple sectors, including healthcare, education, leisure, and commercial projects.
As a BIM Technician, you will be supporting the delivery of high-quality 3D models and coordinated MEP drawings to aid seamless project execution.
This is a full-time office-based role offering a competitive salary and benefits.
You Will Be Responsible For
* Developing and maintaining detailed 2D and 3D models of mechanical and electrical building services using Revit MEP and AutoCAD.
* Applying company standards consistently and staying updated with Revit and AutoCAD software developments.
* Supporting the evolution of Revit processes and BIM best practices across projects.
* Collaborating with multidisciplinary teams to ensure designs are accurate and integrated.
* Managing project information, ensuring timely and precise communication internally and externally.
* Delivering high-quality work within deadlines and meeting project requirements.
What We Are Looking For
* Previously worked as a Revit Technician, CAD Technician, BIM Technician, BIM Coordinator, BIM Modeller, Draughtsperson, Draftsperson, CAD Drafter, MEP Technician or in a similar role.
* Experience of at least 2-3 years in Revit MEP within a building services consultancy or contractor environment.
* Strong understanding of mechanical and/or electrical building services systems.
* Proficiency in Revit MEP and AutoCAD.
* Sound knowledge of BIM processes and coordination principles.
* Attention to detail and ability to work under deadlines.
* Employee Assistance Programme
What's On Offer
* Competitive salary
* Annual leave plus bank holidays
* Private healthcare
* Pension scheme
* Flexible working hours
This is a fantastic opportunity for someone passionate about BIM and MEP design to join a supportive and forward-thinking environment.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Revit Technician to join a well-established consultancy firm, focusing on diverse building services across multiple sectors, including healthcare, education, leisure, and commercial projects.
As a Revit Technician, you will be supporting the delivery of high-quality 3D models and coordinated MEP drawings to aid seamless project execution.
This is a full-time office-based role offering a competitive salary and benefits.
You Will Be Responsible For
* Developing and maintaining detailed 2D and 3D models of mechanical and electrical building services using Revit MEP and AutoCAD.
* Applying company standards consistently and staying updated with Revit and AutoCAD software developments.
* Supporting the evolution of Revit processes and BIM best practices across projects.
* Collaborating with multidisciplinary teams to ensure designs are accurate and integrated.
* Managing project information, ensuring timely and precise communication internally and externally.
* Delivering high-quality work within deadlines and meeting project requirements.
What We Are Looking For
* Previously worked as a Revit Technician, CAD Technician, BIM Technician, BIM Coordinator, BIM Modeller, Draughtsperson, Draftsperson, CAD Drafter, MEP Technician or in a similar role.
* Experience of at least 2-3 years in Revit MEP within a building services consultancy or contractor environment.
* Strong understanding of mechanical and/or electrical building services systems.
* Proficiency in Revit MEP and AutoCAD.
* Sound knowledge of BIM processes and coordination principles.
* Attention to detail and ability to work under deadlines.
* Employee Assistance Programme
What's On Offer
* Competitive salary
* Annual leave plus bank holidays
* Private healthcare
* Pension scheme
* Flexible working hours
* Employee Assistance Programme
This is a fantastic opportunity for someone passionate about BIM and MEP design to join a supportive and forward-thinking environment.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
AV Pre-Sales / Post Solution Designer – Are you in search of a new role where you will have the opportunity to be part of a growing team helping to win and deliver large scale new residential bepoke AV projects. You will have 4years of residential av experience and come with a tremendously good eye for detail and be able to create 1st class technical AV presales / post sales documentation and designs. You will have a good understanding of costing and timescales and your docs will need to be clear and concise as they will be an important part of winning the BID process.
Responsibilities.
Developing an understanding of client’s requirements.
Producing a scope of work, and a list of dependencies that the client agrees to and signs off against.
Producing the Bill of Materials and developing the quote ready for the sales team.
Producing conceptual system schematics, AV Positional Layout Drawings and any other additional drawings necessary for the successful delivery of a project.
Once appointed, handing the project over to the active design and project management team.
Supporting ‘mid-project’ variation documentation, and records.
Specialist Drawings As required for custom production work.
Co-ordinating the drawing development against Site Survey Results and Sales & Handover information including Scope of Works, M&E Requirements, Method Statements & Risk Assessments.
Providing design support to the sales team on tender proposals, raising RFI’s, any other supporting documentation required, and possible post bid meeting attendance.
Occasional site attendance for necessary project meetings.
Working alongside the sales team to assist in producing accurate bills of material on both tender responses and primarily Design & Build projects.
Monitoring industry product trends, changes and integration challenges as they develop.
If you have the skills from within the HIGH END RESIDENTIAL AV world then please send me your full technical CV ASAP.
AV A/V A-V AUDIOVISUAL AUDIO/VISUAL AUDIO-VISUAL CEDIA PRESALES PRE-SALES BOM DOCUMENTATION AUTOCAD CAD DESIGN BMS ESTIMATOR SYSTEMS SOLUTIONS RACK CRESTRON LUTRON NETWORK LIGHTING SOUND AUTOMATION SMARTHOME CONTROL LONDON....Read more...
Sales Design Consultant – Home Improvement & Living SpacesLocation: Camborne - Office based covering CornwallEarning Potential: OTE £60K+ | Base + Uncapped Commission | Flexible Working | Professional DevelopmentJoin Britannia Windows – Redefining Home LivingAt Britannia Windows, we’re not just installing premium UPVC and aluminium windows, doors, conservatories, and bespoke living spaces—we’re transforming the way people experience their homes. With over 40 years of expertise, we combine stunning aesthetics with cutting-edge functionality to create elegant, secure, and energy-efficient solutions.As a Sales Design Consultant, you’ll play a vital role in bringing homeowners' dreams to life, crafting beautiful and functional living spaces. Whether it's designing contemporary conservatories, high-security doors, or bespoke extensions, this is a high-earning opportunity where your creativity and sales ability will be rewarded. This role is office based in Camborne covering Cornwall. Who We’re Looking For
A creative mindset with a sales flair – You have an eye for design and a talent for engaging conversations.Passion for home improvements and living space design – Experience in glazing, architecture, interiors, or home improvement sales is a plus, but not essential.Strong interpersonal skills – Ability to connect with customers, understand their vision, and deliver tailored solutions.Driven and adaptable individuals – Whether you're an experienced sales professional or looking for a new challenge, we provide full training and support.Looking for a new role home improvement market
Your Role: Turning Inspiration into Reality
Collaborate with homeowners to design stunning windows, doors, and Conservatories that balance aesthetics and practicality.Create tailored solutions that enhance style, security, and energy efficiency.Convert pre-qualified leads into sales with full product training and cutting-edge presentation tools.Develop your expertise with continuous professional training and development.Working with CAD software
What We Offer
Unmatched Earnings Potential – OTE £60K+ with uncapped commission and a competitive compensation package.Pre-Qualified Leads - appointments providedAdvanced Training & Technology – Onsite training and digital tools to support your presentations.Flexible Working – Enjoy a self-managed schedule with work-life balance.
INDLS ....Read more...
Project Engineer - Manufacturing Design – Implantable Medical Devices - Cambridge
An exciting opportunity awaits you to join a rapidly growing Medical Devices division and contribute to the development of innovative Implantable Medical Technologies. We are seeking a Senior or Principal Project Engineer who has previously worked as a Manufacturing Engineer with experience in designing production and manufacturing systems within the Medical Devices, Biotechnology or Sciences industries.
Ideally, you will have a degree in Manufacturing, mechanical or process engineering, while having Manufacturing or Process Engineering experience designing in 3D CAD while also having a background in maintaining production machinery.
You will support design teams across multiple functions, with a particular focus on Design for Manufacturing (DFM). The role involves building prototypes and testing new rigs to ensure medical devices function correctly and can be manufactured efficiently. Supply Chain experience would be highly advantageous.
Given the size of the group, we need someone willing to engage in designing, building, and testing systems, as well as maintaining production machinery. As the group expands, this role will evolve, providing excellent opportunities for career advancement.
You will be expected to take leadership of various projects as they arise, whilst also collaborating effectively within teams depends on project requirements.
Due to working alongside other Medical Devices divisions, it is expected that you would have knowledge of ISO 13485, QMS and GMP.
In return, you will receive an excellent starting salary, free lunches, enhanced pension, bonuses, healthcare and other excellent benefits you’d expect with a much larger organisation.
Given the high demand for Medical Devices opportunities, we anticipate significant interest in this role. If you are interested, we recommend submitting your application promptly to avoid missing out.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.
....Read more...
As a Mechanical Engineering Apprentice at Cavendish Nuclear, you’ll join a collaborative and experienced team working across all phases of the engineering lifecycle. Whether you’re supporting new build or decommissioning projects, you’ll play a vital role in the UK’s civil nuclear sector helping to deliver national energy resilience, meet net zero commitments, and safely clean up the nuclear legacy.
You’ll work on a variety of nuclear projects, from developing new technologies and maintaining essential systems to extending the life of vital infrastructure. Your day-to-day activities will include hands-on experience with Computer Aided Design (CAD), 3D modelling, mechanical calculations, and producing engineering documentation to national and international standards. You’ll support operational teams, resolve technical issues, and inform decisions that impact real-world outcomes.
As part of your role, you’ll define design requirements, develop 3D CAD models, produce detailed engineering drawings, and carry out scoping calculations. You’ll also prepare equipment specifications, technical reports, and help manage plant and equipment obsolescence to ensure systems remain safe and reliable. Supporting assembly, testing, and operational teams, you’ll offer technical guidance, resolve engineering queries, and manage nonconformance issues, while gaining exposure to advanced engineering tools such as Finite Element Analysis (FEA) software.
Based at one of our key sites in Humberside, you’ll support major projects at locations like Sellafield. You’ll begin by shadowing experienced engineers, building a strong foundation in design, modelling, calculations, and documentation. As you develop, you’ll take on more complex tasks and gain valuable experience across the full design lifecycle. Every drawing, design, or calculation you contribute to plays a part in protecting people, the environment, and the nation’s energy future.
Throughout your apprenticeship, you’ll be surrounded by supportive mentors and experienced engineers who are invested in your growth. You’ll be part of a wider emerging talent community, sharing experiences and learning alongside other apprentices across the business. You’ll be trusted to take ownership of your development and supported every step of the way as you turn theory into real-world impact.
Training:
You’ll study with the University of Nottingham through the Electro-mechanical Engineer Degree Apprenticeship – a five-year programme that combines university teaching with practical experience in the workplace. Each year, you’ll attend university for four separate one-week blocks, plus additional time on campus for exams. These sessions are designed to strengthen your technical knowledge and build your engineering skills.
For the rest of the year, you’ll continue learning while working. You’ll watch recorded lectures, complete assignments, and carry out projects that relate directly to your job. This flexible approach means you can study at times that suit your schedule, while applying what you learn in real-world situations.
At the end of the programme, you’ll graduate with a BEng (Hons) in Electro-mechanical Engineering. You’ll then move on to a final review and assessment, completing your apprenticeship and stepping into your career as a qualified electro-mechanical engineer.
Training Outcome:
By the end of the programme, you will have earned your degree and gained the skills, experience and knowledge to thrive as a Mechanical Engineer at Cavendish Nuclear – with a competitive salary above £43,000.
You’ll also have the opportunity to build on your progress toward professional registration as an Incorporated Engineer, a recognised benchmark of engineering competence.
As a global organisation, Babcock provides countless opportunities to enhance your skills and advance your career. To support your growth, we’ve introduced the Babcock Role Framework, which outlines roles, career pathways, and development opportunities. With every job mapped to these frameworks, you’ll have a transparent view of the steps needed to reach Senior Engineer and beyond.
Employer Description:Babcock is an international defence company providing support and product solutions to enhance our customers’ defence capabilities and critical assets.
We provide through-life technical and engineering support for our customers’ assets, delivering improvements in performance, availability and programme cost. Our c27,700 employees deliver these critical services to defence and civil customers, including engineering support to naval, land, air and nuclear operations, frontline support, specialist training and asset management.
We also design and manufacture a range of defence and civil specialist equipment, from naval ship and weapons handling systems to liquid gas handling systems. We also provide integrated, technology-enabled solutions to our defence customers in areas such as secure communications, electronic warfare and air defence.Working Hours :Monday to Friday 9am to 5pm.Skills: Communication skills,Attention to detail,Team working....Read more...
A new opportunity has become available for a Production Engineer to join a well-established manufacturing company based in Brighouse, West Yorkshire. The business offers a competitive salary, good benefits package, and long-term career prospects within a stable and supportive team.
Reporting to the Production Manager, the Production Engineer will be responsible for CNC programming, process improvement, and general production support across the workshop. The role would suit someone with a solid background in CNC machining who enjoys a practical, hands-on environment.
Key Responsibilities of the Production Engineer
Program and set up CNC machines, with a particular focus on CNC Turning.
Create and modify CNC programs from customer drawings, including offline programming using CAD.
Implement and maintain production processes and procedures.
Support and lead continuous improvement and problem-solving activities.
Create and manage routings and production documentation.
Order and maintain tooling as required.
Assist with shop floor layout and cell design.
Take part in ongoing training and development.
Essential Skills & Experience of the Production Engineer
Apprentice-trained engineer with strong CNC machining experience, particularly turning and milling with live tooling.
Previous experience within production engineering in a manufacturing environment.
Confident working from engineering drawings.
Familiar with a range of machine controls and programming systems.
Good PC and CAD skills for offline programming.
Able to work on own initiative and as part of a team.
Strong communication skills and good attention to detail.
Reliable, practical, and committed to maintaining high standards.
What’s On Offer
Starting salary up to £40,000 per annum
Full-time, permanent position
Working hours:
Monday to Thursday: 8.00am – 4.50pm
Friday: 8.00am – 12.15pm (36.75 hours per week)
Company pension scheme
Training and development opportunities
Supportive working environment
This is a great opportunity for an experienced Production Engineer to join a respected manufacturing company and play an important part in its ongoing success. To apply, please click apply or contact Conor Wood at E3 Recruitment for more details.
....Read more...
Our client, a leading global ServiceNow partner, is seeking an experienced Lead ServiceNow Technical Consultant to join their team in Riyadh. This role offers the opportunity to lead high-impact ServiceNow implementations across multiple modules, driving enterprise-level digital transformation projects.
Key Responsibilities:
- Lead the technical design, architecture, and implementation of ServiceNow solutions.
- Oversee complex ServiceNow projects, ensuring adherence to best practices, timelines, and quality standards.
- Collaborate with business stakeholders, process owners, and developers to deliver integrated solutions.
- Provide expert guidance on platform capabilities, upgrades, and integrations.
- Mentor and guide junior consultants and developers on the team.
Requirements:
- 5+ years of ServiceNow experience, including hands-on technical implementation.
- Proven experience in leading ServiceNow technical projects and solutions.
- Strong knowledge of multiple ServiceNow modules (ITSM, ITOM, HRSD, SecOps, etc.).
- Experience with ServiceNow integrations (REST/SOAP APIs) and platform architecture.
- ServiceNow certifications (CIS, CAD) highly desirable.
- Excellent communication and stakeholder management skills.
Salary & Benefits:
- Competitive monthly salary: SAR 18,000 22,000 depending on experience.
- Relocation package and benefits package.
- Opportunity to work on large-scale, regional ServiceNow implementations.
- Professional growth, training, and certification support.
This is a chance to play a pivotal role in a leading ServiceNow practice in Saudi Arabia, delivering high-value digital solutions while advancing your career in a supportive, international environment.
Apply now or contact Linking Humans, the #1 Global Partner for ServiceNow Recruitment, for a confidential discussion.....Read more...
If youre an experienced Production Engineer who thrives on bringing new products to life and making manufacturing smoother, this is one youll want to look at.
Youll be joining a well-established engineering business with a brilliant reputation for designing and building complex electro-mechanical assemblies. The role sits within their Engineering team, supporting new product introductions from concept through to full production making sure everything is efficient, safe, and built right first time.
What youll be doing as a Production Engineer:
- Supporting the integration of new products into production creating work instructions, selecting tooling, jigs and fixtures, and optimising line layouts.
- Reviewing and standardising work methods to reduce variability and improve quality.
- Identifying and delivering process improvements through Lean and Six Sigma projects.
- Training and supporting production staff to maintain high quality and consistency.
- Conducting PFMEA as part of project lifecycle reviews.
- Running post-build reviews during pre-production to spot and resolve issues early.
What were looking for in a Production Engineer:
- Proven experience as a Production Engineer (or similar) within an assembly or manufacturing environment.
- HND or equivalent in Mechanical, Industrial or Production Engineering.
- Hands-on experience with Lean manufacturing and Six Sigma principles.
- Strong 3D CAD skills (SolidWorks or Autodesk Inventor preferred).
- Practical, problem-solving mindset able to turn challenges into workable solutions.
- Confident communicator who enjoys working closely with design and production teams.
Nice to have:
- Experience with castings, injection moulding, gear design or flowline manufacture.
- Green Belt Six Sigma certification.
Youll be part of a forward-thinking engineering environment where quality, precision, and teamwork really matter. Every project brings something new, and your input will make a visible difference to how products are made and delivered.
How to Apply
Interested? Id love to tell you more about this role call Ian Broadhurst at Holt Engineering on 07734406996 or drop me a message at ian.broadhurst@holtengineering.co.uk
....Read more...
