GNSS Signal Performance Engineer required to inspire, refine and develop real world active positioning software systems.
As a GNSS Engineer you will join a team of GNSS experts analysing ground based real time signals to create the next generation of precision location and navigation services. Working closely with mathematicians, scientific researchers, algorithm developers, engineers and business development on third party capabilities in software services.
What you will have
Relevant academic research or commercial experience on the analysis of low level GNSS signal processing and measurement engine performance, GNSS measurement engine signal processing data analysis and the experimental method.
Matlab.
Source Control ideally with GIT.
Product development experience: requirements capture, test definition, design and development.
GNSS signal-processing chain understanding.
Synthetic aperture processing skills.
Spirent simulators for GNSS simulation and algorithm implementation.
Kalman filters and other probabilistic estimation techniques.
Multi sensor fusion technique knowledge, ideally tight and deep coupling for GNSS-INS.
C++ programming experience.
RTK, PPP, multi constellation positioning or multipath mitigation method experience.
Key Responsibilities
Technical analysis of GNSS precision location trials, analysis and improvement in Software.
Creation and analysis of data generated with in house simulation tools.
Generate clear, concise and quantitative analysis reports to gain insights to improve software.
Propose, lead and participate in R&D initiatives for ground breaking technologies.....Read more...
Automation Design Expert - Cambridge
Newton Colmore is partnered with a start-up biotechnology company in Cambridge, and we are helping them find automation design experts.
The company are developing a novel biotechnology product that solves problems by combining complex automation technology and robotics. You will be joining their research and development team and utilise your mechanical engineering or electronics knowledge to lead the development of ground-breaking robotic systems.
You will be leading development activities, designing robust mechanisms from initial design phase, through testing, and readying for manufacture. You will also play a pivotal role in formulating strategies and your experience will be key when setting development paths with this new technology.
You will be joining a team of engineers and scientists who are all aiming to develop a world class biotechnology product and they are looking for more people who share wants to share this goal.
This is a vital role for this company and so it’s important for them to find the right person for their team, especially someone who enjoys working in start-ups. The role is open to various seniority levels, from principal-level engineers to “head of” leaders. You will be joining a collaborative team and the role will involve some hands-on design work.
We are looking for a well experienced engineers with significant knowledge of robotics and automation design. Depending on your seniority, any additional experience with setting design strategies and readying products for manufacturing would be advantageous.
The company reward their people with a series of benefits along with their salaries, including monetary bonuses, 8% pension contributions and much more.
We are looking to arrange interviews for this role as soon as possible so if the role is of interest make an application now. One of our consultants will then be in touch with more details.
Newton Colmore is a specialist recruiter dedicated to helping our medical devices and biotech clients find the experts they need to develop new technologies.
Key words: mechanical engineer, mechatronics, robotics, systems design, biotechnology, medical devices, iso 13485, GMP.
....Read more...
What will the apprentice be doing?Civil Engineering involves not only the setting out of a project and the foundation, but also the RC framework and concrete formworks. This role is based on site and in the office, using setting out equipment and design software.
Further tasks may include:
Assisting with site investigations, the worth and potential risks of projects
Developing blueprints using computer-aided design (CAD); Using computer modelling software to analyse surveys and mapping data
Liaising with architects, subcontractors, consultants, co-workers and clients
Ensuring projects meet legal requirements, monitoring progress, and health and safety standards are being met
Resolving design and development problems
Managing budgets and other project resources; preparing project bids and reports
Assessing a project’s environmental impact and potential risk
What training will the apprentice take and what qualification will the apprentice get at the end?The qualification you would be working to is the Level 3 Civil Engineering Technician (Standard) Qualification where we will be looking to partner with a college to provide the training
This training will either be based in college one day per week, or remote online learning, with a paid study time as needed up to 7 hours/1 day per week
You are expected to travel when necessary for college, and you will be responsible to managing/arranging this with your line manager
Training:
Civil Engineering Technician Level 3 Apprenticeship Standard
Apprentices without level 2 English and maths will need to achieve this level prior to taking the end-point assessment
Training Outcome:
On completion of this apprenticeship, you can work as a qualified Civil Engineer/Setting Out Engineer where, with more experience, you can look to progress into a degree level qualification, senior position, management, self-employment, or business owner
On completion of this apprenticeship, you will be eligible for a CSCS Supervisor (Gold) Card
Employer Description:Evolve is a not-for-profit organisation that manages the CITB Shared Apprenticeship Scheme within London. In other terms, we offer construction apprenticeships!Working Hours :Monday - Friday, minimum of 35 hours per week but the potential for more. Approx. 8.00am - 4.00pm, but hours will be confirmed by the Host contractor after successfully passing the Stage 1 & 2 Interviews.Skills: Analytical skills,Attention to detail,Communication skills,CSCS card,Customer care skills,Initiative,IT skills,Logical,Non judgemental,Number skills,Organisation skills,Patience,Presentation skills,Problem solving skills,Team working....Read more...
Product Developer Engineer Barcelona - 3/4 days a week Role Overview Design, develop, and implement RFID hardware and software products across multiple sectors including retail, healthcare, and industrial applications. Work collaboratively across interdisciplinary teams to integrate hardware, software, mechanical, and control systems into innovative product solutions. Key ResponsibilitiesDesign and develop new RFID hardware and software productsCollaborate with cross-functional teams (RF engineers, software developers, mechanical engineers)Integrate hardware, software, mechanical and control systems into cohesive solutionsSupport certification processes and regulatory complianceConduct testing and validation of prototypes and production unitsCreate technical documentation and product specificationsPartner with manufacturing teams for smooth production transitionsTranslate market requirements into technical specificationsRequired QualificationsBachelor's or Master's degree in Engineering, Electronics, Computer Science, or related field4+ years of experience in product development, preferably in electronics or RFID technologyStrong understanding of hardware-software integration principlesExcellent problem-solving skills and attention to detailStrong communication and teamwork abilitiesFluent in EnglishEU residency or EU work permitPreferred SkillsExperience with embedded systems developmentKnowledge of RF technology and antenna designFamiliarity with regulatory certification processes (FCC, CE, etc.)....Read more...
Senior Manufacturing Engineer – Implantable Medical Devices - Cambridge
An exciting opportunity awaits you to join a rapidly growing Implantable Medical Devices division and contribute to the development of innovative Medical Technologies. We are seeking a Senior or Principal Manufacturing Engineer with experience in designing production and manufacturing systems within the Medical Devices, Biotechnology or Sciences industries.
Ideally, you will have a degree in Manufacturing, mechanical or process engineering, while having Manufacturing or Process Engineering experience designing in 3D CAD while also having a background in maintaining production machinery.
You will support design teams across multiple functions, with a particular focus on Design for Manufacturing (DFM). The role involves building prototypes and testing new rigs to ensure medical devices function correctly and can be manufactured efficiently. Supply Chain experience would be highly advantageous.
Given the size of the group, we need someone willing to engage in designing, building, and testing systems, as well as maintaining production machinery. As the group expands, this role will evolve, providing excellent opportunities for career advancement.
You will be expected to take leadership of various projects as they arise, whilst also collaborating effectively within teams depends on project requirements.
Due to working alongside other Medical Devices divisions, it is expected that you would have knowledge of ISO 13485, QMS and GMP.
In return, you will receive an excellent starting salary, free lunches, enhanced pension, bonuses, healthcare and other excellent benefits you’d expect with a much larger organisation.
Given the high demand for Medical Devices opportunities, we anticipate significant interest in this role. If you are interested, we recommend submitting your application promptly to avoid missing out.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Senior Manufacturing Engineer – Medical Devices - Cambridge
An exciting opportunity awaits you to join a rapidly growing Medical Devices division and contribute to the development of innovative Medical Technologies. We are seeking a Senior or Principal Manufacturing Engineer with experience in designing production and manufacturing systems within the Medical Devices, Biotechnology or Sciences industries.
Ideally, you will have a degree in Manufacturing, mechanical or process engineering, while having Manufacturing or Process Engineering experience designing in 3D CAD while also having a background in maintaining production machinery.
You will support design teams across multiple functions, with a particular focus on Design for Manufacturing (DFM). The role involves building prototypes and testing new rigs to ensure medical devices function correctly and can be manufactured efficiently. Supply Chain experience would be highly advantageous.
Given the size of the group, we need someone willing to engage in designing, building, and testing systems, as well as maintaining production machinery. As the group expands, this role will evolve, providing excellent opportunities for career advancement.
You will be expected to take leadership of various projects as they arise, whilst also collaborating effectively within teams depends on project requirements.
Due to working alongside other Medical Devices divisions, it is expected that you would have knowledge of ISO 13485, QMS and GMP.
In return, you will receive an excellent starting salary, free lunches, enhanced pension, bonuses, healthcare and other excellent benefits you’d expect with a much larger organisation.
Given the high demand for Medical Devices opportunities, we anticipate significant interest in this role. If you are interested, we recommend submitting your application promptly to avoid missing out.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Mechanical Engineer – Cancer Instrumentation – Cambridge
A growing division within an established Medical Devices organisation in South Cambridge is currently seeking an experienced Medical Devices Mechanical Engineer to contribute to their ongoing development of cutting-edge cancer instrumentation, aimed at improving patient recovery rates.
This company is expanding its team dedicated to Medical Devices Instrumentation, primarily focusing on Cancer Instrumentation. Ideally, they are looking for candidates with prior experience in Medical Devices Instrumentation. However, they are open to considering candidates who have worked on other types of Medical Devices, provided they were developed to ISO 13485 standards.
The company offers state-of-the-art labs and workshops to facilitate your success in developing these life-saving technologies. You will also receive ongoing training and development to ensure you stay at the forefront of technological advancements.
In addition to relevant experience, it is expected that you hold a relevant degree in mechanical engineering or a related field that has prepared you for a career within the Medical Devices sector.
As mentioned, you will be working on life-saving technologies, benefiting from continued career and skills development, and rewarded with an excellent starting salary, pension, life assurance, bonuses, healthcare, dental coverage, and other benefits typically associated with large multinational organisations.
Due to the anticipated high level of interest in this role, we recommend that if you are interested, you submit your application promptly and specify the types of Medical Devices you have experience working on.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
A new opportunity has become available for a Production Engineer to join a well-established manufacturing company based in Brighouse, West Yorkshire. The business offers a competitive salary, good benefits package, and long-term career prospects within a stable and supportive team.
Reporting to the Production Manager, the Production Engineer will be responsible for CNC programming, process improvement, and general production support across the workshop. The role would suit someone with a solid background in CNC machining who enjoys a practical, hands-on environment.
Key Responsibilities of the Production Engineer
Program and set up CNC machines, with a particular focus on CNC Turning.
Create and modify CNC programs from customer drawings, including offline programming using CAD.
Implement and maintain production processes and procedures.
Support and lead continuous improvement and problem-solving activities.
Create and manage routings and production documentation.
Order and maintain tooling as required.
Assist with shop floor layout and cell design.
Take part in ongoing training and development.
Essential Skills & Experience of the Production Engineer
Apprentice-trained engineer with strong CNC machining experience, particularly turning and milling with live tooling.
Previous experience within production engineering in a manufacturing environment.
Confident working from engineering drawings.
Familiar with a range of machine controls and programming systems.
Good PC and CAD skills for offline programming.
Able to work on own initiative and as part of a team.
Strong communication skills and good attention to detail.
Reliable, practical, and committed to maintaining high standards.
What’s On Offer
Starting salary up to £40,000 per annum
Full-time, permanent position
Working hours:
Monday to Thursday: 8.00am – 4.50pm
Friday: 8.00am – 12.15pm (36.75 hours per week)
Company pension scheme
Training and development opportunities
Supportive working environment
This is a great opportunity for an experienced Production Engineer to join a respected manufacturing company and play an important part in its ongoing success. To apply, please click apply or contact Conor Wood at E3 Recruitment for more details.
....Read more...
We are looking for a motivated Systems Engineer to join our dynamic engineering team. You will help drive projects that deliver innovative, high performance automotive technologies.
Key Responsibilities
Capture, analyse, and manage system requirements
Support system architecture and design using MBSE principles (SysML, MATLAB, Simulink)
Collaborate across hardware, software, and mechanical teams
Contribute to system verification through test specification and results review
Maintain requirements traceability and documentation using tools like Siemens Polarion, Jira, and Confluence
Key Skills
Degree in a relevant engineering discipline
Experience in Systems Engineering or Requirements Management
Strong problem-solving and communication skills
Automotive industry experience
Familiarity with UML, SysML, MATLAB/Simulink
Understanding of electric or hybrid powertrains....Read more...
We are looking for a motivated Systems Engineer to join our dynamic engineering team. You will help drive projects that deliver innovative, high performance automotive technologies.
Key Responsibilities
Capture, analyse, and manage system requirements
Support system architecture and design using MBSE principles (SysML, MATLAB, Simulink)
Collaborate across hardware, software, and mechanical teams
Contribute to system verification through test specification and results review
Maintain requirements traceability and documentation using tools like Siemens Polarion, Jira, and Confluence
Key Skills
Degree in a relevant engineering discipline
Experience in Systems Engineering or Requirements Management
Strong problem-solving and communication skills
Automotive industry experience
Familiarity with UML, SysML, MATLAB/Simulink
Understanding of electric or hybrid powertrains....Read more...
CAD MANAGER / DESIGN MANAGER OLDHAM £60,000 CIRCA (NEGOTIABLE DEPENDING ON EXPERIENCE)
THE OPPORTUNITY:We’re exclusively supporting a highly reputable business based in Oldham, who are looking to appoint a CAD Manager / Design Manager to lead and develop their growing design department.This is a fantastic opportunity to join a business recognised for delivering exceptional design, engineering and installation services across commercial, healthcare, high-security and new build environments. Working alongside major partners, they pride themselves on offering cost-effective, innovative and sustainable solutions.As the CAD Manager / Design Manager, you’ll lead a team of experienced Design Engineers, taking ownership of the design process from concept through to completion. You’ll ensure drawings are technically precise, cost-effective, and aligned with customer specifications, while driving best practice, efficiency and continuous improvement across the department.
THE CAD MANAGER / DESIGN MANAGER ROLE:
Lead and manage a team of Design Engineers, overseeing workload, quality and professional development.
Oversee the production of detailed designs and layout drawings for projects.
Provide technical leadership and ensure all drawings meet client specifications, design standards, and regulatory compliance.
Work collaboratively with project managers, engineers and clients from initial consultation through to final delivery.
Ensure designs are optimised for cost, installation efficiency and long-term performance.
Liaise with suppliers and key manufacturer partners to ensure the most suitable products and systems are specified.
Drive innovation and continuous improvement across the CAD and design process.
Report directly to senior management on project progress, team performance, and design output quality.
THE PERSON:
Proven experience as a CAD Manager, Design Manager, or in a senior Design Engineer role
Strong working knowledge of AutoCAD 2D; additional experience with Autodesk Inventor or SolidWorks would be advantageous.
Excellent leadership and team management skills and able to mentor, motivate and develop junior design engineers.
Strong commercial awareness and ability to ensure designs are both technically sound and cost-effective.
Confident communicator who can liaise effectively with clients, suppliers and internal teams.
Detail-oriented, proactive and able to manage multiple projects simultaneously.
Competent with Microsoft Office and Excel (including formula creation).
TO APPLY FOR THE CAD MANAGER / DESIGN MANAGER POSITION:Please send your CV via the advertisement for immediate consideration.
By sending an application or applying for a job, you consent to your personal data being processed and stored by Get Recruited (UK) Ltd in accordance with our Cookie & Privacy Policy (available in the footer on our website). Get Recruited (UK) Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. We are an equal opportunities employer and we never charge candidates a fee for our services.....Read more...
GNSS Signal Performance Engineer required to inspire, refine and develop real world active positioning software systems.
As a GNSS Engineer you will join a team of GNSS experts analysing ground based real time signals to create the next generation of precision location and navigation services. Working closely with mathematicians, scientific researchers, algorithm developers, engineers and business development on third party capabilities in software services.
What you will have
Relevant academic research or commercial experience on the analysis of low level GNSS signal processing and measurement engine performance, GNSS measurement engine signal processing data analysis and the experimental method.
Matlab.
Source Control ideally with GIT.
Product development experience: requirements capture, test definition, design and development.
GNSS signal-processing chain understanding.
Synthetic aperture processing skills.
Spirent simulators for GNSS simulation and algorithm implementation.
Kalman filters and other probabilistic estimation techniques.
Multi sensor fusion technique knowledge, ideally tight and deep coupling for GNSS-INS.
C++ programming experience.
RTK, PPP, multi constellation positioning or multipath mitigation method experience.
What you will do
Technical analysis of GNSS precision location trials, analysis and improvement in Software.
Creation and analysis of data generated with in house simulation tools.
Generate clear, concise and quantitative analysis reports to gain insights to improve software.
Propose, lead and participate in R&D initiatives for ground breaking technologies.....Read more...
GNSS Signal Performance Engineer required to inspire, refine and develop real world active positioning software systems.
As a GNSS Engineer you will join a team of GNSS experts analysing ground based real time signals to create the next generation of precision location and navigation services. Working closely with mathematicians, scientific researchers, algorithm developers, engineers and business development on third party capabilities in software services.
What you will have
Relevant academic research or commercial experience on the analysis of low level GNSS signal processing and measurement engine performance, GNSS measurement engine signal processing data analysis and the experimental method.
Matlab.
Source Control ideally with GIT.
Product development experience: requirements capture, test definition, design and development.
GNSS signal-processing chain understanding.
Synthetic aperture processing skills.
Spirent simulators for GNSS simulation and algorithm implementation.
Kalman filters and other probabilistic estimation techniques.
Multi sensor fusion technique knowledge, ideally tight and deep coupling for GNSS-INS.
C++ programming experience.
RTK, PPP, multi constellation positioning or multipath mitigation method experience.
What you will do
Technical analysis of GNSS precision location trials, analysis and improvement in Software.
Creation and analysis of data generated with in house simulation tools.
Generate clear, concise and quantitative analysis reports to gain insights to improve software.
Propose, lead and participate in R&D initiatives for ground breaking technologies.....Read more...
You’ll be producing detailed drawings and technical models for crucial infrastructure projects, including state-of-the-art clean and wastewater treatment works, high-capacity pumping stations, and resilient pipeline networks
You'll be trained to master powerful industry software such as Computer Aided Design (CAD), especially AutoCAD Civil 3D, and GIS (Geographic Information Systems) to accurately map, model, and visualise solutions
Contribute to innovative and sustainable solutions—from concept to delivery - that reduce our environmental impact and future-proof our water supplies. This could involve pioneering flood risk reduction schemes or assisting with Nature-based Solutions
You’ll assist Senior Engineers across the entire project lifecycle, working closely with multidisciplinary experts, including Mechanical and Electrical Engineers, to ensure that we are always delivering the most innovative and efficient solution for our clients
Training:
Civil Engineer Level 6 (Degree with honours)
Coventry University - Block release
Training Outcome:
Civil Engineer, Project Management
Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, Shifts to be confirmed.Skills: Communication skills,Problem solving skills,Team working....Read more...
Based in Reading, you'll work alongside a team which specialises in the delivery of building services, energy and sustainability services. We offer a fresh approach by getting involved early, working collaboratively with the design team, guiding design development and using our expertise to help clients make key decisions – an approach that always results in a building that delivers. Training:
Bristol UWE - Day Release
Training Outcome:
Mechanical/Electrical Engineer
Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday to Friday
Shifts to be confirmedSkills: Communication skills,Problem solving skills,Team working....Read more...
Dive into the hands-on world of Civil Engineering design. You’ll be producing detailed drawings and technical models for crucial infrastructure projects, including state-of-the-art clean and wastewater treatment works, high-capacity pumping stations, and resilient pipeline networks.
You'll be trained to master powerful industry software such as Computer Aided Design (CAD), especially AutoCAD Civil 3D, and GIS (Geographic Information Systems) to accurately map, model, and visualize solutions. Training:Coventry University - Block ReleaseTraining Outcome:Civil Engineer, Project Management Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday to FridaySkills: Communication skills,Problem solving skills,Team working....Read more...
Activities you may be involved in include:
CAD design work
Drafting scheme documents
Construction site visits
Liaison with local and public authorities
Training:Over 5 years, you will work towards a BEng/BSc in Civil Engineering, as well as working towards becoming qualified as an Incorporated Engineer with the Institution of Civil Engineers.Training Outcome:As a Degree Apprentice you will be recruited on a permanent contract and after completing your apprenticeship and professional accreditation with the Institution of Civil Engineers, becoming am Incorportated Engineer, you will have the knowledge, experience and professional membership to progress and be rewarded with a great career at M Group.Employer Description:M Group Highways look after 24,000 miles of roads, 280,000 lighting assets and 20,000 miles of footways, always with a view to ensuring that all works are carried out as sustainably as possible and with minimal impact to local communities.
We are proud members of the 5% Club and are committed to ensuring that at least 5% of our workforce are in earn and learn roles such as apprenticeships. Currently this figure is closer to 9% and growing.Working Hours :Working hours to be agreed with line manager.Skills: Communication skills,Team working,Driving Licence....Read more...
An innovative and sustainably focused fuel storage company with a global presence are looking for a skilled and experienced C&I Engineer to join their team in the South East region!
They are passionate about people and ensuring that the development of their employees is at the heart of everything that they do. They are focused on moving towards a more sustainable future within their global operations. Now is a great time to join their team as a C&I Engineer.
Salary and Benefits of the C&I Engineer
Annual Salary: Between £65,000 - £70,000
Annual Bonus Up to 10%
Company Vehicle
Flexible Working Opportunities
Pension Up to 9% Employer Contribution
38 Days Annual Leave (Inc. Bank Holidays)
Private Medical Insurance
Healthcare Cash Plan
Life Assurance Policy 5 x Annual Salary
Key Information on the C&I Engineer Role
With the role of C&I Engineer, you will travel the region of the South East in a field-based role to deliver key projects within the Oil & gas field, providing expertise knowledge and experience as a C&I Engineer.
You will be responsible for managing and maintaining all aspects of instrumentation and industrial Automation Control Systems. Including system upgrades, design, development and installation. The C&I Engineer will also provide technical support to the Maintenance, Operations and Project Teams.
Key Responsibilities
Field equipment and instrumentation selection/approval
Install and commission new elements to improve current C&I equipment and systems in line with project requirement
Maintain and improve existing SCADA systems to ensure performance improvement and efficiencies to operation
Understand process control issues and develop control solutions, working collaboratively with designers and operations
DCS/SCADA/PLC support and fault finding
Routine systems maintenance & support - backup, DR planning and testing, systems prognostic (system log analyses) and diagn
Analysing data and presenting findings in written reports
Review Software and Hardware designs (BPCS, DCS, SIS, PLC and SCADA) Preparation of handover work packs, commissioning procedures and on-site commissioning
Participate in C&I documentation reviews, P&ID reviews, HAZOPs and LOPAs, FATs and SAT
Essential Criteria needed of the C&I Engineer
Around 10 years of experience working in an industry-based role
Vast experience within the Oil & Gas industry under UK Regulations
Degree Qualified in a related or relevant field
Experience of working in High Hazard areas (COMAH, ATEX, DSEAR etc.)
Strong working knowledge of PLC and SCADA Systems
Extremely strong technical knowledge in the C&I field
How to apply?
Apply for this position direct by submitting your CV for review.
....Read more...
The Role
As an Electrical Engineer, you’ll take ownership of the detailed design process, supporting concept through to commissioning. You’ll collaborate with internal design teams, AEs and EPC contractors to ensure projects are technically sound, compliant, and delivered on time and budget.
Your responsibilities will include:
Leading detailed design and technical delivery for substations (110kV–400kV).
Ensuring compliance with IEC, IEEE, BS and national grid standards.
Delivering complex power system studies using ETAP, including:
Load flow and short circuit analysis
Harmonic analysis
Protection & coordination studies
HV/MV/LV cable calculations
Providing design guidance and constructability input throughout project stages — from concept through IFC and into construction.
Conducting design reviews and ensuring adherence to client specifications.
Collaborating across disciplines to integrate electrical design within wider site plans.
Producing high-quality technical reports, calculation packages, and presentations.
Supporting continuous improvement and sustainability initiatives across the design process.
About You
We’re looking for someone with:
5+ years experience in detailed substation design (110kV–400kV).
Strong grounding in protection and control systems.
Proven experience delivering power system studies using ETAP (mandatory).
Familiarity with software such as SKM, Amtech, Ampcalc, DigSilent, or Cymap.
A proactive approach to problem solving and cross-functional collaboration.
Excellent communication and stakeholder management skills.
Willingness to travel across EMEA for short design or site review visits.
Why Join?
Work on industry-leading energy and data infrastructure projects across Europe.
Competitive salary up to £105k, with flexible working arrangements.
Remote-first role with travel to world-class project sites.
Exposure to some of the most advanced substation and grid connection designs in the industry.
Opportunity to innovate in sustainability, carbon reduction and design efficiency.
If you’re an accomplished Electrical Engineer looking to take ownership of complex, high-voltage substation design projects with a forward-thinking global business, we’d love to hear from you.
Apply today or contact us in confidence to learn more.....Read more...
CAD Technician / DesignerExciting Opportunity with a Market-Leading ManufacturerI’m hiring on behalf of a cutting-edge, market-leading construction products manufacturer known for its innovation in design and production. Due to continued growth, they're offering a fantastic opportunity for a CAD Technician, CAD Designer, Technical Designer, Design CAD Engineer or Draughtsperson to join their high-performing design and estimating team.
Location: Loughborough area Salary: £35,000 per annum Working Pattern: Hybrid / Flexible start and finish times
What’s in it for you, as a CAD Technician / Designer
£35k per annum
Hybrid opportunities
Employee benefits
Personal and career development opportunities
What we’re looking for, to be a CAD Technician / Designer
Proven experience working on structural buildings (this is essential)
Strong proficiency in 2D AutoCAD software
Excellent attention to detail and technical accuracy
Desirable – HNC or above in Architecture, Construction, Civil Engineering or Mechanical Design
In this role, as a CAD Technician / Designer, you will:
Create bespoke product designs for manufacturing
Work closely with end clients and internal teams, producing accurate technical designs and estimates
Focus primarily on 2D design work, with opportunities to support in estimating
Join a recognised leader in bespoke manufacturing, driven by creativity and collaboration.If you’re passionate about design, innovation and have experience working on structural buildings, this one’s for you!APPLY NOW!I’m Fiona McSheffrey, a specialist recruiter in the Construction and Modular Building Supply sector at E3 Recruitment. I work in partnership with leading companies across the UK, connecting high-calibre professionals with roles that truly support long-term career progression.If you’d like more information about this opportunity or wish to have a confidential discussion about your next career move please don’t hesitate to contact me directly at E3 Recruitment.....Read more...
Job Title: Quality Engineer
Location: Fareham, Hampshire
Salary: £40,000£45,000 + up to 10% bonus
Hours: Full-time, 37.5 per week, Monday to Friday | Flexible hybrid working possible
Employment Type: Permanent
About the Role
An exciting opportunity for a Quality Engineer to join a leading technology manufacturing operation specialising in engineered systems for critical, certified, and challenging environments. Youll play an integral part in upholding product and process quality, collaborating with skilled teams in production, engineering, and supply chain to exceed customer expectations.
Key Responsibilities
- Maintain and improve production workmanship and inspection standards (including IPC-A-610, IPC/WHMA-A-620).
- Conduct inspections, including first article reports, analyse production rework, and drive root cause investigations.
- Ensure corrective actions are implemented effectively and documented.
- Serve as the key interface for customer complaints, audits, and non-conformance, managing product recalls and field upgrades as required.
- Participate in product design reviews, validate and verify at key stages, support new product introduction (NPI) teams.
- Support supplier quality activities: assess, monitor, and measure supplier performance; investigate and resolve supplier non-conformances.
- Maintain quality management system documentation, perform internal audits, and liaise with external certification auditors (ISO9001, ISO14001).
- Champion continuous improvement using quality tools (8D, 5 Whys, Fishbone, value stream mapping).
Key Requirements
- Experience as a Quality Engineer in a manufacturing environment.
- Strong inspection background of electrical, electronic, and/or mechanical assemblies/components to technical drawings/specs.
- Proven skills in root cause analysis and corrective action implementation.
- Familiarity with internal auditing and ISO9001/Iso14001 systems; experience with Defence Standards is advantageous.
- Skilled in interpreting engineering drawings and using metrology tools (micrometer, vernier, etc.).
- Effective communicator with ability to engage suppliers, customers, and internal stakeholders.
- Adaptable, process-driven, high attention to detail, and comfortable in a fast-moving SME.
- Eligibility for BPSS security clearance and to work in the UK is essential.
To find out more please contact Max Sinclair max@holtengineering.co.uk....Read more...
On-site IT Engineer
On-site IT Engineer required by a high calibre IT Managed Service Provider (MSP), based in London.
This business, which operates as an IT Supplier to organisations in various industries (Accountancy, Law Firms, Property Management etc.), is expanding and offers the chance for significant career progression, along with excellent training opportunities.
The role will require that you provide a high level of IT support for several prestigious clients of the business on client sites.
You’ll have solid experience as an On-site Engineer / Field engineer and will have a good level of competency in the following:
Duties & Accountabilities:
To provide 1st-3rd line support to a portfolio of prestigious clients
Monitor systems and identify performance issues proactively
Work within strict SLA timeframes and manage escalation of incidents within defined timelines
Identify problem trends and implement changes as required
Identify, design and plan to ensure continued service availability and ensure all changes are carried
Work with other functions within the business to help identify issues and requirements with a view to continued service improvement
Visit client sites frequently as required.
Technology Requirements:
Experience working on an ITIL based Service Desk
Excellent troubleshooting skills of standard Microsoft Office suites
Windows Server 2008 & 2012 administration experience.
Experience troubleshooting network issues (DNS, DHCP, NAT, Subnetting)
Working knowledge and administration of AD, Sharepoint, Group policy, Exchange, scripting and remote tools
Any exposure to Cisco products would be extremely beneficial
Experience working with MAC products would be beneficial
Knowledge of Azure Cloud Platform advantageous
This is a fantastic opportunity with a small, but very well regarded MSP in London and if you think this role might suit you then apply for this position as soon as possible - it’s an urgent requirement.
Up to 40k, depending on experience.
Hybrid - 3 days in the office/client site, could vary depending on requirements.
....Read more...
Senior Mechanical Engineer - Bristol
Employment Type: Fixed Term Contract Inside IR35
Rate: £50 p/h
Type: Hybrid
Location: Bristol
We have an exciting opportunity for a Senior Mechanical Engineer to join our team. Are you the kind of engineer who looks at a complex challenge and thinks, “Let’s make it better – and cleaner”? Do you thrive when solving problems others call impossible? Then this sounds like the perfect role for you.
Key Responsibilities:
Creating and developing cutting-edge mechanical designs for nuclear and power projects.
Collaborating across engineering, supply chain, and client teams to deliver world-class solutions.
Ensuring industry codes, standards, and safety procedures are applied correctly.
Carrying out technical investigations within the operational and/or design lifecycle to continuous improvement initiatives.
Championing innovation and driving progress toward Net Zero.
Apply engineering domain knowledge to produce technical solutions and documentation
Skills and Experience:
Minimum HNC/HND (or equivalent) in Engineering.
Knowledge of CAD tools and general engineering drawing practice.
Strong communication and stakeholder management skills.
A drive to challenge, improve, and deliver excellence — whatever your background.
Nuclear knowledge is preferred but not essential
Must be able to achieve SC clearance
What’s in it for you?
Collaborative, innovation-driven environment.
Continuous learning via Expleo Academy accredited training.
Competitive company benefits.
Opportunity to contribute directly to the UK’s Net Zero future.
The chance to work with an equal opportunities employer
If you’re a Senior Mechanical Engineer, ready to take on your next role, then please apply below with your CV.
....Read more...
Join a global engineering team driving the green energy transition. We are seeking a Lead Verification and Validation Engineer to take ownership of HVDC Control and Protection testing and validation activities, ensuring delivery on time and to the highest technical standards.
Key Responsibilities
Lead planning and coordination of Verification and Validation activities.
Develop and execute Factory System Test (FST) cases and support Factory Acceptance Tests (FAT).
Create HVDC system and plant models using PSCAD, RSCAD, or EMTP-RV.
Prepare control system requirements for RTDS lab setups.
Support commissioning teams and contribute to process and tool improvements.
Requirements
Degree in Electrical, Power Systems , Power Electronics Engineering (or equivalent).
Proven experience in HVDC Control and Protection design and verification.
Strong technical skills in PSCAD, RSCAD modelling and system behaviour analysis.
Leadership experience in managing validation teams.
....Read more...
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
