Successfully complete academic studies at the appropriate level:
Gain a good understanding of the supporting departments, i.e., design, purchasing, manufacturing, planning, etc.
To support other engineers in helping them develop thermal solutions and R&D equipment by 3D CAD modelling and creating 2D drawings. This may also involve raising PO Requests for materials, equipment and the subsequent assistance for prototype builds and tests.
To develop product test skills in relation to products manufactured by Boyd. This will involve testing products and also assisting to develop test equipment.
To provide technical assistance to other engineers when required.
To work with due regard to Health and Safety requirements.
To ensure that 5S and other Lean Principles and processes are adhered to.
Training:
Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence) - Technical Support.
Training Outcome:
An apprenticeship allows you to earn a wage, gain valuable work experience and industry-specific competence.
Potential for full-time employment on successful completion of the apprenticeship.
Transferable skills that are invaluable in the wider world of work.
Employer Description:Boyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers’ products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers’ most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years.
Innovation demands for smaller, lighter, and faster technologies with intuitive new features compete with the need for more sustainable solutions. More smart functionality operating faster in tighter spaces with more sophisticated interfaces mean increased power density and more heat, electrical, and mechanical challenges. Adding further complexity, devices are used in unpredictable environments with harsh conditions and must be contaminant and waterproof, insulated against temperature extremes, and ruggedized. Not only are we determined to find solutions to these challenges, Boyd strives to simplify where possible and create the most wholistic, effective, and sustainable solutions.Working Hours :Monday - Thursday, 8.00am - 4.30pm, Friday, 8.00am - 3.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
You will be trained initially in all aspects of general office administration and our bespoke systems and gain experience of the demands of this role. This 12-month programme will develop you into a capable team member, with real skills and responsibilities to drive the rest of your career, with a full training programme, guidance and support in place.
This role offers the ideal candidate the opportunity to become a Level 3 Business Administrator.
Throughout the course you’ll learn and use skills that will support you in a wide range of business and administration tasks. As you progress, you’ll take on more responsibility, and by the time you’ve completed your apprenticeship you’ll be a trusted professional, ready to contribute to live services and progress your career.
If you like being well-organised, processing information, can work in a team as well as being self-motivated, and you have great communications skills, this Apprenticeship is for you.
Your role will cover the general principles of business.
Taking calls for general repairs and maintenance to be carried out and raising job with engineers.
Excellent attention to detail and organisation is required.
Liaising professionally with clients and engineers verbally and digitally.
Producing documentation.
Telephoning clients and engineers.
Good IT skills are required and requests will be processed though CRM systems. Training will be provided.Training:Level 3 Business Administrator Apprenticeship standard, which includes:
Functional Skills qualifications in Maths/English (If required)
Full training provided at employer site
End-Point Assessment (EPA)
Regular Assessor visits, observations, and reviews
Witness testimonies from employer
Exams/Assessments/Workshops
Training Outcome:Possible employment with the company.Employer Description:Dodd Group was formed in 1947 in Shropshire and has remained a privately owned family business. With an unrivalled reputation within the building services sector we offer a comprehensive electrical and mechanical design, installation and maintenance service across many sectors.Working Hours :Monday - Friday, 9am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Administrative skills,Number skills,Logical,Team working,Initiative,Patience....Read more...
There is a skills shortage within construction generally, but particularly within the Building Services Design sector.
We are offering the opportunity to train as a Building Services Design Engineer (HVAC).
Working as part of the design team within an M&E contractor, you will not only gain the necessary technical skills, but you will benefit from the practical knowledge and experience of working with our installation teams; this will set you apart from other design engineers who go down the consultancy route and will be of huge benefit to your career. Added to that, you will have the satisfaction of seeing your designs come to life as the buildings are constructed and ultimately delivered to the end client.
As part of the process, you will learn to use design software tools such as AutoCAD, Revit, Bentley Systems (Hevacomp) and more....
Working with our design team the apprentice will be assisting with the preparation of the following:
HVAC Design Calculations (Bentley Hevacomp).
HVAC Systems Layouts / Schematics (AutoCAD, Revit).
Selection and Scheduling of HVAC Plant and Equipment (Excel).
Coordination review with other members of the design team ie; Architects, Structural.
Training:The Apprentice will be required to attend college at our Somer Valley Campus in Radstock one day per week, term time only.Training Outcome:Fully competent lead designer, responsible for their own projects and managing the design process to successfully deliver Building Services Schemes. Working autonomously, alongside other design team members.
Pay levels to reflect this level of responsibility and performance, relative to the market demands.Employer Description:Axiom Building Services are a Mechanical and Electrical Contractor, based in Gloucester. We specialise in Design and Build type projects, working with Main Contractors, Architects and Structural Engineers to take concept designs through the construction phase to practical completion and handover to the end client.
We have a team of design engineers working on the technical aspects of our projects, and they will work closely with our site teams to ensure schemes are practical, maintainable and commercially viable.
We pride ourselves on being able to deliver complex projects to a high standard.Working Hours :Mondat to Thursday 8am-5pm
Friday 8am-4pm
with one hour for lunch each daySkills: Communication skills,IT skills,Attention to detail,Organisation skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Apprentice Field Service Engineer to cover the North of the UK, working on volumetric concrete mixers and cement silos, diagnosing, repairing and maintaining our customers’ construction machinery.
The role includes:
The commissioning and calibration of our machines to ensure the highest level of accuracy
On-site servicing
Customer training
Machine inspections
Diagnosing mechanical, hydraulic and electrical faults, using diagnostic tools and technical knowledge
Attending emergency breakdowns
Timely completion of job reports and timesheets
Providing technical advice and support to customers when required
Presenting a positive image of Armcon at all times
A flexible approach to workload, hours and possible nights away from home
Being friendly and personable as you will be customer facing
Full training will be provided, essentially by working on customer sites alongside our Senior Field Service Engineer and occasionally at our site in Poynton Cheshire. Ultimately, you will be working solo covering the North of England.
Ideally you will already have or be working towards getting a driving licence. Once fully trained, you will be issued with a company van, fuel and credit card. Power tools will be provided and there is a company pension scheme. We offer 24 days’ holiday, uniform and ongoing training and career development. Also, an annual bonus based on company performance.Training:Maintenance and Operations Engineering Technician Level 3.
Training will take place 1 day per week at Kendal College. Training Outcome:Possibility to progress to Level 4 HNC. Continue on to a permanent role and ultimately be working solo as a Field Service Engineer.Employer Description:Armcon are suppliers to the concrete industry. We are a dealer for Proall volumetric mixers and we supply moulds to precasters for the production of items such as fence posts, gravel boards, paving slabs and an ornamental range.
We have been in business for over 30 years and are employee owned.Working Hours :Monday to Friday 7am to 5pm (with some flexibility required to meet customer needs)
This is a field-based role covering North of England. Ideally candidate will be based in or around Carnforth.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Initiative,Patience,Physical fitness....Read more...
Apprentice Field Service Engineer to cover the North of the UK, working on volumetric concrete mixers and cement silos, diagnosing, repairing and maintaining our customers’ construction machinery.
The role includes:
The commissioning and calibration of our machines to ensure the highest level of accuracy
On-site servicing
Customer training
Machine inspections
Diagnosing mechanical, hydraulic and electrical faults, using diagnostic tools and technical knowledge
Attending emergency breakdowns
Timely completion of job reports and timesheets
Providing technical advice and support to customers when required
Presenting a positive image of Armcon at all times
A flexible approach to workload, hours and possible nights away from home
Being friendly and personable as you will be customer facing
Full training will be provided, essentially by working on customer sites alongside our Senior Field Service Engineer and occasionally at our site in Poynton Cheshire. Ultimately, you will be working solo covering the North of England.
Ideally you will already have or be working towards getting a driving licence. Once fully trained, you will be issued with a company van, fuel and credit card. Power tools will be provided and there is a company pension scheme. We offer 24 days’ holiday, uniform and ongoing training and career development. Also, an annual bonus based on company performance.Training:Maintenance and Operations Engineering Technician Level 3.
Training will take place 1 day per week at Kendal College. Training Outcome:Possibility to progress to Level 4 HNC. Continue on to a permanent role and ultimately be working solo as a Field Service Engineer.Employer Description:Armcon are suppliers to the concrete industry. We are a dealer for Proall volumetric mixers and we supply moulds to precasters for the production of items such as fence posts, gravel boards, paving slabs and an ornamental range.
We have been in business for over 30 years and are employee owned.Working Hours :Monday to Friday 7am to 5pm (with some flexibility required to meet customer needs)
This is a field-based role covering North of England. Ideally candidate will be based in or around Carnforth.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Initiative,Patience,Physical fitness....Read more...
Critical Systems Technician (24/7/365 Rota) + Up to £60,966 + Bonus + 2x Overtime Location: City of LondonPermanentSalary: £49,966 + £11,000 Shift Allowance + Bonus + OT Are you an experienced technician looking for a dynamic, rewarding role at the heart of critical infrastructure? We're recruiting a Critical Systems Technician to join our team on a 24/7/365 rotating shift pattern, supporting the smooth and secure operation of vital systems. This is a rare opportunity to be part of a highly skilled, supportive team with excellent compensation, generous benefits, and real progression potential. DutiesIssue and close work permits; raise work requests and authorisations.Deliver statutory maintenance and support monthly systems tests.Maintain 24/7/365 critical system resilience and asset availability.Perform planned/reactive maintenance via the IWMS platform.Conduct daily/periodic system checks and inspections.Respond to faults and failures, prioritising safety and minimal downtime.Inspect and report on HVAC, electrical, fire, and other engineering systems.Proactively suggest maintenance improvements and innovations.Manage and support statutory testing and surveys across systems/assets.Coordinate and assist OEM contractors on maintenance and emergency tasks.Serve as an Authorised Person (HV/LV or Mechanical) as required.Complete all mandatory training and meet performance objectives.Promote Health & Safety compliance across all work areas.Ensure work aligns with risk assessments, SLAs, and service standards.Foster team collaboration and a culture of continuous improvement.Join the technical On-Call rota to support multi-site operations.Support incident management and recovery exercises PackageBase salary: £49,966Shift allowance: £11,000Bonus: 10% of base salaryOvertime opportunities: Paid at double the hourly rate on weekends and weekdaysAdditional reward payments:£1,500 for HV/LV Authorised Person£1,500 for Mechanical Authorised Person Key Benefits26 days annual leaveNon-contributory career average pension scheme (guaranteed income for life)Private health insuranceDental insurance (level 1)Life assurance (4x pensionable salary)Interest-free season ticket loanAccess to a wide range of voluntary benefits....Read more...
Account Manager – Hard FM Services – Central London – Up to £80K Are you ready to lead operations at one of Central London’s most prestigious FM providers?Do you have a proven history of success within the commercial building services sector, ideally overseeing landmark or trophy buildings?If so, this could be your next career move…This is an exciting opportunity to join one of the most respected names in the facilities management industry.The business manages multiple high-end maintenance contracts across Central London and is seeking an accomplished Account Manager to take ownership of one of its flagship, long-standing contracts. The client relationship is exceptionally strong, and the agreement has recently been renewed on a long-term basis.Role overview: You’ll be responsible for ensuring all operational and technical functions are delivered to the highest standard, meeting contractual commitments and exceeding client expectations.The contract value is approximately £4 million, with a dedicated team of around 20 engineers and support staff across several key sites.Key responsibilities:Oversee financial budgets, P&L, and all technical matters.Drive performance against agreed KPIs and SLAs.Lead on-site health, safety, and environmental compliance.Plan and execute building shutdowns and complex client project works.Uphold and improve company quality standards and processes.Manage recruitment needs across the contract.Support the technical growth and development of staff, including annual appraisals.Maintain strong daily client relationships.Produce and review all necessary reporting.Identify and secure additional business opportunities to enhance client satisfaction and boost revenue.Candidate profile:Qualified in electrical or mechanical engineering (C&G, HNC, HND or above).Strong financial acumen, with proven P&L and budget management experience.Solid engineering knowledge and technical problem-solving skills.Track record managing large engineering teams in high-profile buildings.Excellent written and verbal communication at all levels.Highly organised with the ability to manage competing priorities.Experienced in delivering projects on time and within budget.Package:Salary up to £80K25 days annual leaveHealthcare coverPension schemePerformance bonusPlease send your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Technical Contract Manager – Leading FM Provider – Essex - up to 65k + 5k car allowance Would you like to work for one of the leading maintenance providers in the UK? Have you got a proven track record with the technical facilities and maintenance services industry? Have you got experience of working in a commercial environment? If so please read on... An excellent opportunity has arisen to join one of the UK's leading companies in the facilities industry. They currently maintain a number of facilities and maintenance contracts across the UK and are looking for a Technical Contract Manager to work in a high profile commercial contract based in Essex. The main purpose of the job will be to ensure that technical operations within the buildings and estate are maintained to a very high standard. There will also be an element of managing the financial aspect of the contract; however there will be assistance on offer from the senior management team. The role will also be responsible for managing the maintenance team of six multi-skilled engineers on site and also dealing with external subcontractors. On site duties will also include:Manage all technical issues across the buildings.Manage agreed KPI and SLA’s.Responsible for managing the company’s H&S and environmental performance on each site.Plan and implement building shutdowns and basic client project works.Responsible for managing the company’s quality procedures on each site.Recruitment of any new staff required on sites.Responsible for the technical development of all staff, which will include annual appraisals.Management of client relationships on a daily basis.Management of all reports.Manage any additional business opportunities that will deliver client satisfaction and increase contract sales revenue.Responsible for the permit system.Applicants for this role must be able to demonstrate the following:Qualified in electrical or mechanical engineering discipline; C&G, HNC, HND or higher.Strong understanding of building management systems.Strong technical engineering understanding.Previous experience of managing engineering teams.Experience of service delivery in commercial environments. Ability to communicate both verbally and in writing with all levels of staff and clients.Ability to manage and prioritise a demanding and varying workload.Ability to deliver projects on time and on budget.....Read more...
JOB DESCRIPTION
The Certified Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment. Equipment inspection includes preventative maintenance (PM) and associated documentation.
Duties/Responsibilities, Core knowledge:
Comply with all safety policies (especially Cardinal Rules - e.g. Hot Work, LOTO, Confined Space) Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure Implement the needed preventative measures, including optimization of PM program Ensure reliable operation of facility support processes and utilities (i.e. HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters) Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g. programmable logic controllers, human machine interfaces, lighting) and components (e.g. sensors, switches, valves) Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g. product vessels/reactors, pumps) and components (e.g. piping, manual valves), Investigate equipment/process failures and difficulties to diagnose faulty operation, Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs, Serve, as needed, on process hazard analysis (PHA) teams/sessions Comply with all safety policies (especially Cardinal Rules - e.g. Hot Work, LOTO, Confined Space), Serve, as needed, on process hazard analysis (PHA) teams/sessions Skills, Qualifications, Experience, Special Physical Requirements:
One year certificate from college or technical school Ohio State Maintenance Mechanic Certificate or equivalent as deemed by the company Two to four years related experience and/or training Journeyman card in various disciplines Industrial Technology program graduate Military mechanical experience Experience in LEAN manufacturing Experience in chemical/coating processing & production Experience in dispensing operations Ability to work overtime as needed Ability to manage multiple priorities, effective Team Player, self-motivated, quick learner Excellent communication skills with the ability to read, write and communicate fluently in English
Benefits:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online!....Read more...
The Maintenance Planner offers a basic salary of £39,500 working for a PLC listed market leading manufacturer based at their Throckley factory near Newcastle. The Maintenance Planner will work closely with the Site Engineering Manager and Engineering Team Leaders, to maximize the performance of engineering operations and will be responsible for the work planning of the maintenance team and contract labour, including shutdowns and PPMs. What's in it for you as a Maintenance Planner:
Salary: £39,500
Day's based position - Monday to Friday 8am – 4.30pm
Pension contribution up to 10%
Health Care Scheme Aviva Digi+
Share Scheme options
Training and career development opportunities
Job security and personal development within a market leading, international manufacturing organisation.
Main duties of the Maintenance Planner:
The leadership of the maintenance shutdown coordination, establishing best engineering practices
Control and populate the engineering shift plan for all engineering personnel across all disciplines including contractors
To chair weekly scheduling meetings for planned activities
Control, populate and prioritise a work backlog for all maintenance activities or activities involving the engineering team
Key involvement with the implementation of a new CMMS system and T-card system
Work closely with the Engineering Maintenance Supervisor, Engineering Manager, and Operational Managers to provide a schedule of work for shift engineers to maintain and improve the reliability of assets
Liaise with production, services, and central functions, to ensure that routine maintenance is planned, and job requests are executed and costed efficiently and effectively
Ensure that equipment removed from the plant, which is being repaired in-house, is coordinated through the shift plan, Work Orders allocated to the repair of each item and appropriate cost captured
Control of accurate records and documentation for all production and auxiliary plant including insurance records
Coordinate and site contact for Contractors to ensure safe and controlled activities are completed on-site and to the quality of engineering standards
Experience required to apply for the Maintenance Planner:
CMMS and Maintenance Planning experience
Strong organisational skills, ability to plan resources and coordinate people effectively
Engineering Training / Qualifications (NVQ3, HNC)
Demonstrable Mechanical and Electrical Engineering
Problem-solving tools and techniques to deliver efficiency
Strong computer skills
Good Communication techniques
Continuous Improvement Approach
If you are interested, please apply now…....Read more...
Embedded Hardware Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Our Client:Is a pioneering, family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek a highly skilled Embedded Hardware Developer with a background in Electronic Engineering and experience in FPGA/VHDL to join our client's team. As an Embedded Hardware Developer, you will design, develop, and maintain simulated signal-processing systems, combining C++, Java or Python with FPGA/VHDL.
Your Tasks:
Development and simulation of complex signal processing systems
Design and verification of simulated signal processing system with hardware (mainly FPGA/ VHDL)
Design and development of PCB for control systems
Maintenance and further development of the internal firmware environment and hardware
Commissioning and tests of control systems
Required Skills:
Master’s or Bachelor’s degree in electrical science or similar education
Experience in signal processing, FPGA designs and VHDL programming
Experience in PCB development for control systems
Knowledge of component-oriented design with JAVA OSGI/RCP, with SPS programming (Siemens) and with Python as a plus
Alternatively, strong C++ skills are welcome
Good language skills in English and German (both spoken and written)
Positive work attitude. Collaborative team player with excellent communication skills to support team members
Ability to work in interdisciplinary teams
Benefits:
CHF 100 -130k + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Aargau, Baden, Switzerland (Remote)Salary: CHF 100 -130k + Bonus Benefits
Mandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/ARG100130....Read more...
Mobile HGV TechnicianLocation: Enfield, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime availableThe Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician
Diagnostic analysis, repairs or preventative maintenance
Provide a customer facing product support
Complete PDI inspections
Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer’s specification and company policy
Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard.
Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures.
Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required
Accurately complete all relevant paperwork including engineer’s reports, inspections, calibrations check and job sheets.
Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings
Experience required for the Mobile HGV Technician
Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment.
Hands-on experience with a range of HGVs and specialist vehicles.
Other:
Full UK driving licence.
Good work ethic
Willing to learn
City & Guilds Level 3 – Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous
What We Offer
A varied and rewarding full-time role with a market-leading company.
A supportive team environment with opportunities for training and personal development.
Excellent benefits package including:
Company pension scheme
Cycle-to-work scheme
Free or subsidised travel
Wellness programme
Further training and career progression opportunities
For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.....Read more...
Mobile HGV TechnicianLocation: Greater Manchester, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime availableThe Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician
Diagnostic analysis, repairs or preventative maintenance
Provide a customer facing product support
Complete PDI inspections
Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer’s specification and company policy
Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard.
Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures.
Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required
Accurately complete all relevant paperwork including engineer’s reports, inspections, calibrations check and job sheets.
Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings
Experience required for the Mobile HGV Technician
Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment.
Hands-on experience with a range of HGVs and specialist vehicles.
Other:
Full UK driving licence.
Good work ethic
Willing to learn
City & Guilds Level 3 – Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous
What We Offer
A varied and rewarding full-time role with a market-leading company.
A supportive team environment with opportunities for training and personal development.
Excellent benefits package including:
Company pension scheme
Cycle-to-work scheme
Free or subsidised travel
Wellness programme
Further training and career progression opportunities
For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.....Read more...
Mobile HGV TechnicianLocation: Northampton, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime availableThe Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician
Diagnostic analysis, repairs or preventative maintenance
Provide a customer facing product support
Complete PDI inspections
Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer’s specification and company policy
Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard.
Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures.
Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required
Accurately complete all relevant paperwork including engineer’s reports, inspections, calibrations check and job sheets.
Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings
Experience required for the Mobile HGV Technician
Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment.
Hands-on experience with a range of HGVs and specialist vehicles.
Other:
Full UK driving licence.
Good work ethic
Willing to learn
City & Guilds Level 3 – Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous
What We Offer
A varied and rewarding full-time role with a market-leading company.
A supportive team environment with opportunities for training and personal development.
Excellent benefits package including:
Company pension scheme
Cycle-to-work scheme
Free or subsidised travel
Wellness programme
Further training and career progression opportunities
For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.....Read more...
JOB DESCRIPTION
The 3rd Shift Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment. Equipment inspection includes preventative maintenance (PM) and associated documentation.
Duties/Responsibilities, Core knowledge:
Comply with all safety policies (especially Cardinal Rules - e.g. Hot Work, LOTO, Confined Space)
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure
Implement the needed preventative measures, including optimization of PM program
Ensure reliable operation of facility support processes and utilities (i.e. HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters)
Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g. programmable logic controllers, human machine interfaces, lighting) and components (e.g. sensors, switches, valves)
Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g. product vessels/reactors, pumps) and components (e.g. piping, manual valves),
Investigate equipment/process failures and difficulties to diagnose faulty operation,
Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs,
Serve, as needed, on process hazard analysis (PHA) teams/sessions
Comply with all safety policies (especially Cardinal Rules - e.g. Hot Work, LOTO, Confined Space),
Serve, as needed, on process hazard analysis (PHA) teams/sessions Skills, Qualifications, Experience, Special Physical Requirements:
One year certificate from college or technical school
Ohio State Maintenance Mechanic Certificate or equivalent as deemed by the company
Two to four years related experience and/or training
Journeyman card in various disciplines
Industrial Technology program graduate
Military mechanical experience
Experience in LEAN manufacturing
Experience in chemical/coating processing & production
Experience in dispensing operations
Ability to work overtime as needed
Ability to manage multiple priorities, effective Team Player, self-motivated, quick learner
Excellent communication skills with the ability to read, write and communicate fluently in English
Benefits:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online!....Read more...
Maintenance & Operations Engineering Technicians will work on various types of plant and equipment commonly found throughout the Engineering Industry.
Technicians will undertake installation, testing, servicing, removal, replacement, maintenance and repair of a range of equipment, sometimes complex, as part of planned preventative and reactive maintenance programmes. They may also undertake decommissioning activities when plant is being removed from service.
You will be responsible for the quality of your own work, possibly others’ and ensuring the work is completed safely, meets stakeholder quality, time and budget requirements, whilst maintaining the efficient running of plant and equipment.
Repair cleaning machines to the required standard
Test completed machines for quality & performance
Keep accurate records
Inventory booking
Work within health & safety guidelines
Maintain a clean and tidy work area
Training:
Level 3 Maintenance and Operations Engineering Technician qualification
Apprentices must achieve Level 2 English and mathematics prior to taking the end-point assessment for the apprenticeship if you haven’t achieved them on entry
Training schedule has yet to be agreed. Details will be made available at a later date
Training Outcome:
We would expect the successful apprentice to move onto be a Nilfisk Engineer in the Workshop or a Mobile Service Technician, maintaining machines at customers sites!
As a global company we pride ourselves on having opportunities for progression on a global scale!
Employer Description:The company was founded on a vision of producing and selling products of the highest quality worldwide and for more than a hundred years, Nilfisk has adapted to the changing needs of markets and customers with innovative products and solutions. With a global sales force and proven sales channels, we have established strong and valuable customer relations and partnerships across the world and we strive to be at the forefront of technological advancement to drive future customer needs.
Today, Nilfisk offers an extensive range of premium cleaning products and a trusted aftermarket offering to the professional market. Our main product lines are floorcare equipment, vacuum cleaners and high pressure washers and a wide range of domestic vacuum cleaners and high pressure washers to consumers worldwide.Working Hours :37.5 hours a week (days to be confirmed).
8.00am - 4.00pm, with half an hour unpaid break for lunch.
Training schedule to be set by the college.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Electrical/Wiring Knowledge,Engine and Hydraulic Knowledge....Read more...
Position: Technical Director
Location: Milano, Italy
Who are we recruiting for?
Our client is a globally renowned organization specializing in solar projects, with a proven track record in developing, engineering, constructing, and maintaining projects across several countries. Following a recent acquisition by a major investor in the renewable energy sector, they have secured a strong pipeline of new projects in Italy set for completion in the coming years.
What will you be doing?
Oversee the technical execution of solar PV projects, ensuring alignment with engineering best practices, industry standards, and regulatory requirements.
Lead the technical due diligence process for project development, procurement, and construction phases.
Collaborate with engineering, procurement, and construction (EPC) teams to optimize project designs and implementation strategies.
Define and implement quality control processes, ensuring compliance with safety, environmental, and technical standards.
Provide technical leadership and support in resolving complex engineering challenges during project execution.
Assess and manage project risks, proposing mitigation strategies to ensure seamless project delivery.
Evaluate emerging technologies and innovations to improve project efficiency and cost-effectiveness.
Engage with internal stakeholders, external consultants, and regulatory bodies to ensure successful project execution.
Are you the ideal candidate?
Bachelor's or Master’s degree in Engineering (Electrical, Civil, or Mechanical preferred).
8+ years of experience in the renewable energy sector, with a strong focus on solar PV projects.
Proven experience in technical management roles within large-scale construction or energy infrastructure projects.
Expertise in engineering design, procurement, construction management, and project execution.
Strong understanding of grid connection requirements, permitting processes, and technical regulatory frameworks in Italy.
Ability to manage multiple stakeholders and work collaboratively across different teams.
Excellent problem-solving skills and a proactive approach to technical challenges.
Fluent in English and Italian.
What’s in it for you?
Competitive basic salary of 100k euro plus benefits package
Performance-based bonuses
Career growth opportunities within a rapidly expanding company
Work on cutting-edge renewable energy projects contributing to a sustainable future
Who we are
Executive Integrity is a global executive search and recruitment consultancy for a more sustainable world, with a focus on talent within the Green Technology and Renewable Energy sectors. We allocate a proportion of our profits to Friends of the Earth International to support environmental initiatives worldwide.
....Read more...
Field Service Engineer
Taunton
£32,000 - £35,000 Basic + (OTE £45,000) + Bonus + Commission + Door to door + Manufacturer Training + Career Progression + Overtime + Holiday + Growing Company
Elevate your career now by stepping into a hands-on Field Service Engineer role, where you'll receive comprehensive technical and manufacturer training to become a specialist in the industry and excel at what you do. With clear progression opportunities, you'll have the chance to advance your skills, take on more responsibility, and further develop your career whilst having the opportunity to earn over £45,000 in through overtime paid at a premium!
This company manufactures vehicle wash systems for commercial and industrial settings. Due to further growth, they are looking for an additional Field Service Engineer to help drive their continued success. Join now and seize the opportunity to thrive in a dynamic, forward-thinking environment, where you'll gain valuable experience working with cutting edge technology. Join now and be part of an exciting journey of growth and innovation.
The Field Service Engineer Role Will include:* Service, Repairs, PPMs And Breakdowns Of Car Wash Systems
* Field Service Role Covering The Taunton Area
* Full Training
The Successful Field Service Engineer Will Have: *Experience With Mechanics (motors , pumps)
* Happy To Work In Outdoor Environments
* Happy To Cover The Taunton Area
Please Apply Or send your CV For Immediate Consideration.
Keywords: Trainee field service engineer, trainee engineer , engineer, field engineer, field service engineer, service engineer,Site service engineer,Service Engineer, mechanical,mechanical fitter, Installation Engineer , field install engineer, static engineer, service tech, service technician,embedded engineer,multimetre,Electrical engineer, maintenance engineer, automatic door engineer,Mobile engineer,appliance engineer, white goods engineer, gaming engineer, mechanical engineer,electrician, mechanical engineering,elecmech engineer,electro-mechanical,LCV Engineer, HGV Engineer, PSV Engineer,Bus engineer, motorvehice engineer, mechaningle motors, engineer,Taunton,Wellington,Trull,Tonedale,Rumwell,Rockwell Green,West Buckland,Milverton,Huntsham,Culmstock,plumber, three phase, motors,vehicle wash engineerThis vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at Future Engineering Recruitment to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants; however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
PCB Design Engineer – Contract (6 months, likely to extend) – London (Greenwich) On-site 3 days per week | Start date: September 2025 (ideally) Umbrella rates up to £55.00 per hourWe’re looking for an experienced PCB Design Engineer to join a high-profile engineering project developing advanced power feeding equipment that supports subsea systems. This is a fantastic opportunity to work on complex, multi-layer PCB designs within a collaborative and forward-thinking engineering environment.This role is suited to someone with proven experience in PCB design (rather than someone seeking their first step into this area). We welcome applications from all backgrounds and are committed to creating an inclusive, supportive environment where every team member can thrive.What you’ll be doing:• Turning circuit schematics into detailed PCB layouts using Altium Designer (essential) and/or Zuken CR5000 (desirable – training provided if needed).• Designing multi-layer, high-speed and power PCBs, optimised for signal integrity, thermal management, and power distribution.• Producing Gerber files, BOMs, and fabrication drawings for manufacturing.• Ensuring compliance with IPC, IEEE, and DFM/DFT guidelines.• Partnering closely with hardware engineers, mechanical teams and manufacturers to deliver robust, manufacturable solutions.• Leading design reviews, troubleshooting, and prototype validation.• Keeping pace with new tools, trends, and standards in PCB design.What we’re looking for:• Solid PCB design experience in Altium Designer (non-negotiable); Zuken experience a bonus.• Proven ability to deliver complex, multi-layer PCB designs (high-speed, power electronics).• Knowledge of signal integrity, power distribution, and thermal considerations.• Understanding of manufacturability and testability (DFx) best practices.• Familiarity with IEC-62368-1 safety standards (creepage/clearance).• Strong collaboration and communication skills.• Degree (or equivalent experience) in Electronics / Electrical Engineering.Why join us?• Work on cutting-edge technology powering global undersea communication networks.• Be part of an inclusive, supportive environment that values diversity and different perspectives.• Flexibility built-in: while we ask for three days on-site, we understand life happens and will accommodate where we can.• A contract with the likelihood of extension – giving you stability while working on impactful projects.🔹 Contract type: 6 months (likely to extend up to 12 months)🔹 Hourly rate: Umbrella rates up to £55.00🔹 Location: On-site 3 days per week (flexible around this where needed)🔹 Start date: Late August / early September 2025If you’re an experienced PCB Design Engineer looking for your next contract where your skills will be valued and your contributions will make a real impact, we’d love to hear from you.....Read more...
Maintenance Fitter
£35,000 - £45,000 DOE plus great benefits
Shropshire-based with travel
Our long-standing client has been providing fuel storage and combustion services for over 35 years. Their expertise dates back to the 1960s, when fuel and water quality challenges on merchant naval vessels shaped their approach to engineering. Today, with a modern headquarters in Shropshire and a strategic stock point in the heart of Aberdeen port, they support clients across the UK – including key operators in the North Sea Offshore industry.
They’re now looking to add a skilled Maintenance Pipe Fitter to their team – someone with solid technical knowledge of pipe fitting installation and maintenance.
What you’ll be doing:
Carrying out monthly planned preventative maintenance (PPM), including fuel sampling, filter checks and dewatering
Supporting or performing fuel testing – full training provided
On-site maintenance of dosing pumps, fuel pumps, dosing systems, hoses and pipework
Fabrication of dosing systems and related components
Managing stock levels and ordering necessary materials or spares
Installing dosing systems, polishers, dispensing units and pipework
Overseeing contractors on installation and maintenance projects
What we’re looking for:
Strong experience working with hydraulic and piping systems – including Press-Fit, swaging, and pipe fittings
Ability to inspect systems and identify issues such as leaks or faults
Confident carrying out pipework and pump repairs
Welding experience preferred
Knowledge of electrical systems or pressure testing is an advantage, but not essential
Comfortable working independently and as part of a team
Practical problem solver with a hands-on approach
Time-served Apprenticeship or experience in a similar engineering or maintenance role
This is a great opportunity to join a respected, specialist business with long-term contracts and a focus on technical quality. If you’ve got the experience and want to work with a company that values precision and expertise, we’d like to hear from you.
By applying for this role, you are consenting for C2 Recruitment to hold and process your data in compliance with the General Data Protection Regulations.
To view other great vacancies at C2 Recruitment, please visit our website or call us for a confidential chat about upcoming opportunities in:
Buying & Merchandising and Ecommerce | Charity & Non Profit | Design, Technical, Wholesale & Production | Finance | HR & Talent | H&S & Compliance | Hospitality, Catering & Leisure | Marketing, Digital & Technology | Office & Administration | Property & Centre Management | Retail, Trade and Luxury Operations | Senior Appointments & Executive | Sales & FMCG | Supply Chain & Logistics & Warehouse | Manufacturing & Engineering
....Read more...
Within this role you will learn to size and select, plan and install, service, maintain and commission plumbing and domestic heating systems.
Main core duties will include:
Planning, selecting and sizing core plumbing and domestic heating systems to meet customer’s needs
Carrying our preparatory work ahead of installing plumbing and domestic heating systems
Testing, commissioning and de-commissioning systems
Carrying out handovers to customers/ end users using a range of communication methods and demonstrating how to use systems
Servicing, maintenance, fault diagnosis, and repair techniques on cold and hot water, central heating, above drainage and rainwater systems
Learning installation and testing techniques for electrical components and control systems on plumbing and domestic heating systems
Understanding scientific plumbing, domestic heating and mechanical principles
Providing excellent customer service and establishing the needs of colleagues, customers and stakeholders
Understanding health and safety legislation, and following safe work practices
Training:For the full apprenticeship, candidates will complete:
Level 3 Plumbing & Domestic Heating Technician Apprenticeship Standard
Apprentices covering the Gas specialism must also be registered on the Gas Safe Register to fully achieve the apprenticeship
For the End Point Assessment (EPA), apprentices will undertake 2 knowledge tests (to cover core and optional statements), a practical planning test, a practical competency test and an interview with an independent assessor underpinned by the portfolio of evidence. Following completion of the apprenticeship, the apprentice will be able to register as EngTech with the Engineering Council through The Chartered Institute of Plumbing and Heating Engineering (CIPHE) and/or The Chartered Institute of Building Services Engineers (CIBSE).
Apprentices will also be able to obtain a Construction Skills Certification Scheme (CSCS) Card through the Joint Industry Board for Plumbing and Mechanical Engineering Services (JIB-PMES) following completion of the Health and Safety Assessment.
Apprentices must attend college sessions one day per week at the Ipswich Road campus, located near Norwich city centre.Training Outcome:A position may be available for the right candidate following successful completion of the apprenticeship. The business is looking for somebody who wants to develop and gain a position following their apprenticeship.Employer Description:S A Tooley carries out plumbing and heating installation works to the private domestic sector and New Build housing projects.
The company also also works on light commercial plumbing & heating projects, servicing and maintenanceWorking Hours :Working hours will fall between 7:30am to 4:30pm, Monday to FridaySkills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Willing to learn,Good hand skills....Read more...
Responsible for maintenance and repairs to fleet vehicles and equipment.
Responsible for maintenance and repairs to mechanical handling equipment.
Responsible for maintenance and repairs to generator trailers and other fleet trailers.
Responsible for purchasing vehicle parts as required, liaising with the Parts Manager if necessary to ensure costs are kept under control.
Attend vehicle breakdowns when required.
Record details of all work done and schedule servicing to comply with Operators Licence requirements, liaising with the hire department.
Provide out-of-hours breakdown cover on a callout rota.
Deliver & collect generators and ancillary equipment using appropriate company vehicles where required, including refuelling.
Provide general assistance in the yard, including loading & offloading equipment.
Comply with the Company Health & Safety Policy, including carrying out general housekeeping to ensure work areas are tidy. This includes company vehicles.
Comply with all aspects of the company ISO quality management procedures, proactively contributing to the company’s continuous improvement programme.
As part of the garage team, you will provide break down cover, which will include out of hours availability for which an allowance will be paid.
Training:Training and Qualification Level.
What training will the apprentice take and what qualification will the apprentice get at the end?
Motor Vehicle and Maintenance Technician (Heavy Vehicle) Level 3
Servicing and repairing Heavy vehicles.
City of Bristol College (Parkway)
Block Release
You will be trained at City of Bristol College in their Advanced Motor Vehicle Technology Centre in Parkway.
City of Bristol College Advanced Motor Vehicle Centre
1 New Road
Stoke Gifford
BS34 8SF
I
It is a 5-minute walk from Bristol Parkway Train Station and easily accessible from the M5.
College delivery is a block release for 2 weeks at college 5 times a year. A timetable of your college dates will be provided.Training Outcome:Full-time employment.Employer Description:Power Electrics (Bristol) Ltd. is a leading generator hire company in the UK, specializing in providing reliable, sustainable power solutions for various sectors, such as construction/infrastructure, electrical contractors and utilities, and various other applications. Our commitment to excellence and customer satisfaction has established us as a trusted partner in the industry.Working Hours :30 - 40 hours per week. Days and times to be confirmed.Skills: Problem solving skills,Team working,Initiative,UK Driving licence,Trustworthy and dependable,Good timekeeping,A passion to learn....Read more...
We are seeking a motivated Business Administration Apprentice to join our growing team. This role offers the opportunity to gain valuable workplace experience while completing a Level 3 Business Administration Apprenticeship, equipping you with the skills and knowledge needed for a successful career in administration.
As a Business Administration Apprentice, you will support the day-to-day operations of the organisation, including:
Handling incoming calls, emails, and enquiries from employers, learners, and partners.
Supporting the enrolment and onboarding process for apprentices and learners.
Maintaining accurate records on systems such as the Digital Apprenticeship Service (DAS) and CRM tools (e.g. HubSpot).
Assisting with the creation and management of course adverts, schedules, and resources.
Preparing and maintaining learner and employer documentation (PLIC copies, agreements, H&S checks, etc.).
Providing administrative support to trainers and management, including scheduling, filing, and correspondence.
Supporting compliance activities such as Health & Safety and funding requirements.
Contributing to continuous improvement of administrative processes.
Training:Skills & QualitiesWe are looking for someone who is:
Highly organised with good attention to detail.Confident using IT systems (Microsoft Office, Excel, Word, Outlook).
Able to communicate professionally with employers, colleagues, and learners.
A proactive problem-solver and quick learner.Positive, reliable, and willing to work as part of a team.
Training Outcome:Completing a Business Administration apprenticeship gives you valuable skills in organisation, communication, problem-solving, and teamwork that can be applied in almost any sector. After this apprenticeship, you could progress into roles such as:
Administrator / Office Coordinator – managing day-to-day office tasks
Team Leader / Supervisor – taking on more responsibility and managing others
Personal Assistant (PA) / Executive Assistant (EA) – supporting senior staff directly
Specialist Roles – moving into areas like HR, finance, marketing, or customer service
Office or Operations Manager – overseeing administrative teams and processes
You may also choose to continue your development by completing a higher-level apprenticeship or business-related qualification, which could lead to senior management roles in the future.
Employer Description:At Training for Electricians Ltd, we’re passionate about helping the next generation of electricians build successful, hands-on careers. Whether you're a school leaver, an adult learner, or someone looking for a fresh start, we offer a range of practical electrical training courses tailored to suit your needs.Working Hours :Monday to Friday, 9.00am to 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills....Read more...
Job Title: HIU & FCU Maintenance Engineer Location: Battersea, LondonEmployment Type: Full-timeSalary: £45,000 per annumWorking Hours: 08:00 – 17:00, Monday to Friday Role Overview We are seeking a skilled and experienced HIU & FCU Maintenance Engineer to carry out the servicing, maintenance, repair, and optimization of Heat Interface Units (HIUs) and Fan Coil Units (FCUs) in a high-end residential or commercial environment. This role demands technical expertise, attention to detail, and exceptional customer service skills to ensure reliable heating and cooling services for residents in a luxury development. BenefitsCompetitive salary of £45,000 per yearMonday–Friday 08:00 - 17:00Opportunities for professional training and developmentWork in a prestigious Battersea developmentSupportive, collaborative maintenance teamDuties & ResponsibilitiesServicing & Maintenance – Routine inspection, cleaning, and servicing of HIUs and FCUs to manufacturer standards, ensuring efficiency and reliability.Repairs & Fault-Finding – Diagnose and fix faults promptly, replacing components such as pumps, valves, thermostats, and fans.System Monitoring – Track performance, adjust settings, and implement improvements to optimise heating and cooling systems.Compliance – Work in line with all health & safety, environmental, and regulatory standards, completing all required documentation.Customer Service – Liaise with residents and management to explain works, minimise disruption, and provide guidance on system use.Inventory & Coordination – Maintain spare parts stock, order replacements, and work closely with contractors or the wider maintenance team.Continuous Improvement – Keep up to date with new technologies, manufacturer updates, and best practices in HIU/FCU maintenance.Key Skills & Qualifications ExperienceProven experience in servicing and maintaining HIUs and FCUs in luxury residential or commercial settings.Familiarity with heat networks, district heating, and integrated building services.Strong background in diagnostics and fault-finding.SkillsIn-depth technical knowledge of HIUs, FCUs, and associated systems.Competence in mechanical, electrical, and water system repairs.Excellent communication and customer service skills.Strong attention to detail and high-quality workmanship.Proficiency with diagnostic tools and software.Ability to work independently in a fast-paced environment.If you are interested please send your cv to Alex Denton of CBW Staffing Solutions ....Read more...
Job Title: HIU & FCU Maintenance Engineer Reports to: Building Services Manager / Maintenance SupervisorLocation: Battersea, LondonEmployment Type: Full-timeSalary: £45,000 per annumWorking Hours: 08:00 – 17:00, Monday to Friday Role Overview We are seeking a skilled and experienced HIU & FCU Maintenance Engineer to carry out the servicing, maintenance, repair, and optimization of Heat Interface Units (HIUs) and Fan Coil Units (FCUs) in a high-end residential or commercial environment. This role demands technical expertise, attention to detail, and exceptional customer service skills to ensure reliable heating and cooling services for residents in a luxury development. BenefitsCompetitive salary of £45,000 per yearMonday–Friday 08:00 - 17:00Opportunities for professional training and developmentWork in a prestigious Battersea developmentSupportive, collaborative maintenance teamDuties & ResponsibilitiesServicing & Maintenance – Routine inspection, cleaning, and servicing of HIUs and FCUs to manufacturer standards, ensuring efficiency and reliability.Repairs & Fault-Finding – Diagnose and fix faults promptly, replacing components such as pumps, valves, thermostats, and fans.System Monitoring – Track performance, adjust settings, and implement improvements to optimise heating and cooling systems.Compliance – Work in line with all health & safety, environmental, and regulatory standards, completing all required documentation.Customer Service – Liaise with residents and management to explain works, minimise disruption, and provide guidance on system use.Inventory & Coordination – Maintain spare parts stock, order replacements, and work closely with contractors or the wider maintenance team.Continuous Improvement – Keep up to date with new technologies, manufacturer updates, and best practices in HIU/FCU maintenance.Key Skills & Qualifications ExperienceProven experience in servicing and maintaining HIUs and FCUs in luxury residential or commercial settings.Familiarity with heat networks, district heating, and integrated building services.Strong background in diagnostics and fault-finding.SkillsIn-depth technical knowledge of HIUs, FCUs, and associated systems.Competence in mechanical, electrical, and water system repairs.Excellent communication and customer service skills.Strong attention to detail and high-quality workmanship.Proficiency with diagnostic tools and software.Ability to work independently in a fast-paced environment.If you are interested please send your cv to Charlie Long of CBW Staffing Solutions ....Read more...
