Electronics Design Engineer required to join an existing, successful and growing team. You will have an Electronics degree and circuit design experience ideally in DC power systems.
Key Skills
Complex mixed signal analogue and digital system Design.
Analogue experience ideally creating power electronics and DC-DC
converter systems.
Practical electronics skills, such as fine pitch surface mount soldering and test equipment applications.
Low speed digital logic systems using communication interfaces RS485, I2C, SPI, CAN, etc.
Microprocessor based hardware system design. ....Read more...
A fantastic opportunity for an Optimisation Engineer to join the growing AI function in the company???s talented Science & Research team. The company is a global leader in Biometric Verification. The company enables financial institutions, government agencies and other organisations to verify the users Biometrically.
Candidate requirements
Over 3 years??? experience in machine learning or computer vision.
Experience with at least one of the following programming languages: Python, Matlab, C++.
Experience with cloud services such as GCP, Azure, AWS.....Read more...
Electrical Switchgear Field Service Engineer required to retrofit, service, repair and maintain medium and low voltage Electrical Switchgear, Transformers and protection relays across the UK so travel is required.
Skills
Electrician or Electrical Technician maintenance or retrofit experience ideally through the apprentice route.
Low and medium voltage experience of Power Stations, Hospitals, Steel works, industrial or commercial properties.
Role
Electrical Service and Planned Preventative Maintenance PPM
Routine maintenance, full service legacy and routine inspections.
Upgrading and replacing obsolete protection relays, control relays and other switchgear.....Read more...
Senior Hardware Design Engineer required to join a team creating cutting edge hardware products. VHDL / Verilog for FPGA experience is essential implementation of algorithms, high speed digital design and experience in developing products for manufacture.
Key skills
FPGA tools and technologies such as Microchip, Xilinx, SoC, Modelsim, Matlab and Simulink.
FPGA design and verification in VHDL, requirements capture, simulation, synthesis, place & route, and timing analysis.
Communication protocol knowledge, DSP or VLSI maths functions.
System on Chip or SoC design targeting FPGA or ASIC.....Read more...
Hot-Fire Test Engineer required with experience of COMAH controlled testing of Firing engines using propellants.
You will work within a Test department of a space thruster test facility on Hot Fire Testing programmes including: site preparation and maintenance, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety, etc.
This is a fantastic opportunity to join an exciting and rapidly growing organisation at the cutting edge of Aerospace and Space Research, Design and Development.....Read more...
A medical device design and development company based in Suffolk is looking for a Design Engineer with strong academic track record, ideally a 1st or strong 2:1 from Russell Group University to join their compact, versatile and supremely agile team. The company has been developing medical technology products for some of the biggest names in pharmaceutical sectors.
Key skills and responsibilities
1st class Degree in Mechanical Engineering or Engineering Science from Russell Group University.
Mechanical CAD.
SolidWorks.
Working experience in Mechanical Designing.
Knowledge of Injection Moulding. ....Read more...
Electrical Switchgear Field Service Engineer required to retrofit, service, repair and maintain medium and low voltage Electrical Switchgear, Transformers and protection relays across the UK so travel is required.
Skills
Electrician or Electrical Technician maintenance or retrofit experience ideally through the apprentice route.
Low and medium voltage experience of Power Stations, Hospitals, Steel works, industrial or commercial properties.
Role
Electrical Service and Planned Preventative Maintenance PPM
Routine maintenance, full service legacy and routine inspections.
Upgrading and replacing obsolete protection relays, control relays and other switchgear.....Read more...
Senior Hardware Design Engineer required to join a team creating cutting edge hardware products. VHDL / Verilog for FPGA experience is essential implementation of algorithms, high speed digital design and experience in developing products for manufacture.
Key skills
FPGA tools and technologies such as Microchip, Xilinx, SoC, Modelsim, Matlab and Simulink.
FPGA design and verification in VHDL, requirements capture, simulation, synthesis, place & route, and timing analysis.
Communication protocol knowledge, DSP or VLSI maths functions.
System on Chip or SoC design targeting FPGA or ASIC.....Read more...
Hot-Fire Test Engineer required with experience of COMAH controlled testing of Firing engines using propellants.
You will work within a Test department of a space thruster test facility on Hot Fire Testing programmes including: site preparation and maintenance, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety, etc.
This is a fantastic opportunity to join an exciting and rapidly growing organisation at the cutting edge of Aerospace and Space Research, Design and Development.....Read more...
A medical device design and development company based in Suffolk is looking for a Design Engineer with strong academic track record, ideally a 1st or strong 2:1 from Russell Group University to join their compact, versatile and supremely agile team. The company has been developing medical technology products for some of the biggest names in pharmaceutical sectors.
Key skills and responsibilities
1st class Degree in Mechanical Engineering or Engineering Science from Russell Group University.
Mechanical CAD.
SolidWorks.
Working experience in Mechanical Designing.
Knowledge of Injection Moulding. ....Read more...
As an Apprentice Drainage & Plumbing Engineer working with Smithys, you will benefit from exceptional training and support both in the field as well as in the office. Our friendly and experienced team of plumbers and engineers will guide and support you through your training, ensuring you are always receiving the correct exposure and experience to be able to become a well rounded engineer/plumber by the end of your apprenticeship.
No day is the same, however below are some of the roles and responsibilities that will be a part of your role:
Attending emergency call outs for both drainage and plumbing, whether it be a toilet or urinal blockage, or issues with leaks and damaged pipework, you will be involved in all elements of the emergency procedure
PPM Works – Descales of Pipe, Unvented Cylinder Checks, Tap Changes, Hot Water Tank Checks etc.
Repairs & Maintenance – working across our network of commercial clients, you will assist our engineers with repairs and maintenance tasks, such as pipe work alterations, changing and repairing hot water systems, external drainage repairs and investigation works where required
Project Work – as a part of the role, you will also get involved in larger scale projects working alongside our more experienced plumbers and engineers, such as suspended pipework alterations, install of multiple appliances, such as, sinks and dishwashers, and any other project work that takes place.
Administration – Using the companies in house reporting software, you will log reports on jobs confirming what works have been completed and any recommendations for further work
We work with a network of clients, from national retailers to large scale construction firms, so there will be a requirement to work out of hours from time to time which will be reimbursed at the companies agreed overtime rates.Training:
Plumbing and Domestic Heating Technician Level 3 Apprenticeship Standard
Training Outcome:
All apprentices are being taken on with the intention to make them a permanent member of the team once fully qualified
Providing the individual meets the credentials required there are opportunities for further development once qualified, for example, senior engineer, site supervisor / foreman or other opportunities that are available within the business at the time
Employer Description:Supplies all elements of drainage and plumbing services across a wide span of commercial clients. We offer emergency call outs, PPM services and project maintenance to all of our clients. Based in Hatfield Heath Essex, we have engineers attending and completing jobs all around the UK.Working Hours :Monday - Friday. 08:00 - 17:00
Opportunity for additional hours and weekends from time to time depending on the workload, however the appropriate notice will be given prior.
You'll be reimbursed at the agreed overtime rate.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Enthusiasm/Self Motivated,Trustworthy,Reliable....Read more...
Assist in monitoring and responding to security alerts and incidents
Support the implementation and maintenance of security tools such as SIEM, endpoint protection, and vulnerability scanners
Help conduct regular security assessments and audits
Learn to identify and mitigate cyber threats and vulnerabilities
Assist in managing identity and access controls, including MFA and privileged access
Participate in security awareness training initiatives and phishing simulations
Support compliance efforts with industry standards such as ISO 27001, PCI-DSS, and GDPR
Document security processes, incidents, and remediation steps
Collaborate with IT and development teams to ensure secure system configurations and deployments
Training:Why choose our Cyber Security Engineer Level 4 apprenticeship?
The Cyber Security Engineer apprentice can help to design, build and test secure networks, security products or systems to help protect your organisation against cyber threats.
QA is a market leader in cyber security training, with a state-of-the-art immersive cyber gamified learning, giving apprentices a hands-on learning experience in simulating a real cyber threat.
QA's exclusive partnership with Circadence Corporation, the pioneer of the hands-on gamified learning platform Project Ares®, allows us to uniquely incorporate hands-on scenario training into our cyber security apprenticeships. The Project Ares platform offers a totally immersive experience, using automated features to support skills adoption with an in-game advisor, Athena, who advises our players through scenario-based challenges. The platform scenarios replicate the unpredictability and escalating levels of complexity that cyberattacks can present. It drives high levels of engagement through leaderboards and badges; elements used widely in the gaming world.
QA’s Cyber Security Engineer Level 4 apprenticeship programme enables the apprentice to:
Develop problem-solving and critical thinking skills in a safe, but realistic environment
Apply all of the acquired skills throughout the programme, with added scoring of players and opponent actions with replay for object assessment
Take part in hands-on training and active-learning models that increase retention rates by 75% so that cyber apprentices can prepare for real-world challenges
Tools and technologies learned:
Apprentices will learn to use Project Ares, Python, Microsoft Azure, Microsoft PowerShell, Linux and AWS.Training Outcome:90% of QA apprentices secure permanent employment after completing: this is 20% higher than the national average.Employer Description:PayPoint is a leading provider of digital payments and commerce solutions, committed to building a culture that empowers all our people to thrive and feel a sense of belonging. Our bright and modern offices are based in Welwyn Garden City, with hybrid working options available. We offer a range of employee benefits including an on-site gym, private medical insurance, life assurance, and access to discounted services through our online benefits portal.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,IT skills,Customer care skills,Problem solving skills,Analytical skills,Team working....Read more...
Deputy Authorising Engineer (Water Treatment) - FM Service Provider - South East, South West & East Anglia - Up to £55,000 per annum + Company Vehicle Are you a Water Treatment RP or AP looking for a step up? Do you have building maintenance experience? If the answer is yes, then read on... An exciting opportunity to work for an established FM Service provider based across the South East, South West and East Anglia has arisen! CBW are currently recruiting for a Deputy Authorising Engineer with a Water Treatment bias to look after several sites across the South East, South West and East Anglia across a range of contracts. The successful candidate will have a proven track record in water treatment, ideally with experience working as an RP or AP. Key ResponsibilitiesTo act as Deputy Authorising Engineer in Water Services, Safe Water, Water Hygiene and TreatmentEnsure identification of appropriate training, assessment, and auditing of Responsible Persons for Water and any other disciplines to which you have been appointedResponsible for assisting with the management of the Safety Rules and Procedures for Water Services, in line with company policies and changes in legislation. To write written schemes of control and associated documentationProvide technical and engineering support and coaching as necessary to ensure all Responsible Persons are able to carry out their duties; and to assist in the development of RP/CP to ensure a balanced succession planCarry out internal or external auditing activities as required, including evaluation of subcontractor documentation and service reportsProvide guidance and support on technical issues as required to appointed projects and contractsPackageSalary of up to £55,000Company Van & Fuel CardPension Scheme25 days annual leave (+ public holidays)Life Cover equivalent to 1 times annual salary24/7 Employee Assistance Program and access to mental wellbeing appEmployee discount shopping schemes on major brands and retailersGym membership discounts Cycle to work scheme Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmesHours of workMonday to Friday - 08:00 am to 17:00 pmRequirementsDirect or indirect Responsible (or Authorised) Person experience in Water Services. (Indirect would include support of an RP/AP as a service provider)Apprentice trained or NVQ/HNC, ideally degree-qualified in a relevant disciplineExperience working within an M&E maintenance environmentExcellent interpersonal and customer/client relationship skillsValid driving licenceDirect or indirect Responsible (or Authorised) Person experience in Healthcare Water Services and/or Evaporative Cooling Systems (Desirable)Healthcare experience (knowledge of HTMs) (Desirable)Knowledge and experience in water hygiene and treatment, including closed water systems, swimming & spa pools, and steam boilers (Desirable)Professional qualifications or recognized membership (MWMSoc, MIoW, or MIHEEM, for example) (Desirable)Knowledge and experience of Ventilation Systems (Desirable)Please send your CV to Archie Reed at CBW Staffing Solutions for more information. ....Read more...
Are you a proficient Production Engineer used to working to stringent defence level expectations?
Do you have an impressive engineering background in Electrical or Electro-mechanical manufacturing?
Join our client as Electrical Production Specialist!
Our client are ready to power the future of innovation. They are searching for a passionate and hands-on professional with proven experience in electrical and electromechanical systems to join a dynamic production team as a Production Engineer.
What Youll Do:
- Work at the cutting edge of technology, integrating, troubleshooting, and optimising electrical and electromechanical systems across a variety of exciting projects.
- Collaborate with engineers and innovators, turning designs into reality and ensuring that the products consistently exceed expectations and stringent constraints at the highest level of quality.
- Diagnose technical issues, implement creative solutions, and play a pivotal role in delivering robust, reliable, and exciting results.
What You Bring:
- Solid background in electrical engineering and deep familiarity with electromechanical components and assemblies.
- A solid understanding and experience working with bills of materials
- An ability to create concise work instructions
- A proven ability to create accurate and up-to-date manufacturing documentation created to aid the manufacture
- Experience diagnosing, repairing, and maintaining complex electrical and electromechanical systems
- Practical knowledge of safety protocols, wiring schematics, circuit troubleshooting, and precision assembly.
- A can-do attitude, problem-solving mindset, and eagerness to learn and tackle new challenges every day.
Why Join Us?
- Work with passionate professionals who value innovative thinking and hands-on expertise.
- Take part in projects that are driving change in our industry.
- Grow your skills and career in a collaborative, supportive environment.
- An exciting industry to be part of
Benefits:
- £50 - £60 per hour DOE
- 6- month contract - Potentially leading to permanent work
- Parking onsite
- Interesting business, with a great culture
Inspire us with your expertisebring your electrical and electromechanical know-how
Apply directly or get in touch at alison.francis@holtengineering.co.uk....Read more...
Lead Engineer – Aerospace / Mechanical
Location: Hayes, UK (Hybrid)
Type: Permanent
Salary: £50-£54k
We’re seeking an experienced Lead Engineer to take ownership of a landing gear product line or technical projects, acting as the main point of contact for all engineering matters. You’ll lead projects from concept to completion, support customer needs, and drive continuous improvement in a fast-paced aerospace environment.
What you’ll do:
Own and manage all technical aspects of your product line.
Lead engineering projects, ensuring delivery on time, to spec, and within budget.
Support sales with technical input, pricing, and proposals.
Analyse technical data and manage customer-driven changes.
Collaborate with global teams and share best practices.
What we’re looking for:
Degree in Aeronautical/Aerospace or Mechanical Engineering (or equivalent experience).
Proven track record in delivering technical projects in aviation/aerospace.
Knowledge of landing gear systems (preferred) or complex technical data analysis skills.
Familiarity with AMM/IPC/CMM, MRP/SERP (e.g. SAP/AMOS).
Understanding of EASA Part 21J/21G/145.
Strong communication and customer engagement skills.
Why join us?
Hybrid working.
Competitive salary.
Opportunity to lead projects with real impact in the aerospace industry.
Fantastic employee benefits including medical insurance and discounted flights!
Apply now with your CV and take the next step in your engineering career.....Read more...
Junior Network Engineer
Location: North Fambridge (onsite), with occasional travel to other UK sites Driving Licence: UK full driving licence required Employment Type: Full-time, permanent
Our client—a leading UK marina operator with a network of beautiful coastal locations—is seeking a passionate and proactive Junior Network Engineer to join their expanding in-house IT team. This is an exciting opportunity to get hands-on with key infrastructure projects, including the rollout of full fibre connectivity, while supporting staff across multiple sites.
Key Responsibilities
Provide onsite end-user IT support
Participate in infrastructure projects, including full fibre broadband installation
Support the maintenance and configuration of core network equipment
Assist with diagnosing and resolving hardware and connectivity issues
Travel to other marina locations when required (expenses paid)
Experience Required
We’re looking for a candidate with genuine enthusiasm for networking and IT systems, with a foundation in:
IP addressing and subnetting
VLAN configuration and network segmentation
Router setup and traffic management
DNS and domain resolution
Additionally, experience or awareness of the following is highly desirable:
Microsoft 365 applications, including Office 365 and Intune
General server infrastructure (Windows Server environment preferred)
You should also have:
A valid UK driving licence
A proactive attitude and willingness to learn
The ability to work onsite full-time as part of a close-knit team
Must be eligible to work in the UK.
Office based (North Fambridge)
Paying up to 35k, depending on experience. ....Read more...
Electronics Engineer – Medical Devices – Cambridge
Due to the expanding nature of Medical Devices, Wearable Technologies, Robotics, Artificial Intelligence, and other advanced technologies, we are looking for someone to work on the invention of new Medical Devices. Based in Cambridge, you will be collaborating with engineers and scientists on the development of industry-changing, life-saving, and life-improving medical devices.
Technologies are developing all the time, and this organisation needs to stay at the forefront of technological breakthroughs. Due to this, they need experienced Electronics Engineers who are happy to work across several different projects.
We ideally need someone who has past experience with Medical Devices within ISO 13485 or EN 60601 standards.
While working on brand-new technologies, you will be problem-solving and thinking up exciting new ways of approaching problems on projects. This will keep your role very interesting, meaning it is unlikely that you will ever get bored in this role.
Apart from past experiences as an Electronics Engineer in Medical Devices, it is expected that you would hold a degree in an Electronics Engineering field that led you into this line of work.
You will be rewarded with an excellent starting salary, bonus, pension, gym membership, free lunches, and other excellent benefits.
I expect a lot of interest in this role, so if you are interested, I would suggest making an application now or risk missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application, and one of our team at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Human Factors Design Engineer – Medical Devices – Cambridge
A Medical Devices company, based in Cambridgeshire, is currently looking for a Human Factors Design Engineer to assist with the ongoing development of new Medical Devices.
Working alongside an established R&D team, your role will be of paramount importance in ensuring that product design adheres to Medical Devices standards, taking into account Product Development, Industrial Development, and Human Factors Development factors, specifically ISO 13485, ISO 14971, and IEC 62366 standards.
You will need to have prior experience in the Medical Devices sector, which could have been gained in industry or through PhD/Post Doc roles. We are open to candidates with varying levels of experience, and the salary range will be determined based on your experience.
Due to the nature of this company's work, you will be at the forefront of the medical devices sector, constantly learning new concepts and generating innovative ideas on a daily basis.
It is expected that you hold a degree in Human Factors, Industrial Design, Product Design, or another related subject that has led you to specialize in the Human Factors role, particularly in the Medical Devices sector.
You will be rewarded with an excellent starting salary, a bonus, career development opportunities, ongoing skills enhancement, and a wide range of benefits.
I anticipate a high level of interest in this role, so if you are interested, I recommend submitting your application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Assistant PlumberReading£28,000 - £34,000 Basic + Overtime up to £5k + Company Van + Fuel Card + Tools + PPE + Pension + Training + Career Development + Stability + Immediate Start Join an award-winning pioneer in water management as an Assistant Plumber. With a strong reputation in sustainable water treatment solutions, they provide full training in this dynamic industry and a competitive remuneration package.
Due to continued growth and new contract wins, they’re looking to bring a customer-focused Assistant Plumber's within the water management team. You will be out in the field, installing, servicing, and maintaining a range of unique and niche systems across commercial sites. You will have personal training and development to become a technical expert within the company.
Your Role as a Assistant Plumber will include: * Installing, servicing, and commissioning products * Carrying out planned preventative maintenance and reactive repairs * Diagnosing and resolving technical issues on-site * Liaising with the client on siteThe Ideal Assistant Plumber will have: * Basic plumbing experience or equivalent qualification * Full UK Drivers licence * Good ICT and Admin Skills * Happy to travel across various sites, with staying away if required
Please apply now or contact Dave Blissett for immediate consideration on 074581 42963. Keywords: Assistant Plumber, Service Engineer, Trainee Field Service Engineer, Trainee Plumber, Water, Plumbing, Water Hygiene, Maintenance, Watford, Slough, High Wycombe, Maidenhead, Reading, Basingstoke, Berkshire, Buckinghamshire, Surrey, Hampshire
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply.....Read more...
An opportunity has arisen for an Estimator to join a well-established design agency, providing bespoke solutions from concept through to delivery.
As an Estimator, you will be preparing estimates, sourcing materials, and ensuring projects are delivered cost-effectively. This full-time role offers salary range of £28,000 - £32,000 and benefits.
You will be responsible for:
* Managing enquiries and costing schedules.
* Producing cost estimates using in-house systems.
* Preparing quotations and liaising with third-party suppliers.
* Reviewing and challenging design concepts to improve cost efficiency and feasibility.
* Assisting in value engineering to maximise profitability.
* Attending internal meetings and contributing technical input where required.
* Monitoring project budgets and analysing post-project margins.
What we are looking for:
* Previously worked an as Estimator, Cost estimator, Projector estimator, Estimating engineer, Estimating Assistant, Technical Estimator, Costing engineer, Commercial Estimator, Costing Analyst, Buyer, Procurement Specialist, Purchaser, Purchasing Officer or in a similar role.
* Possess 2-3 years of industry experience or Degree in Design.
* Experience in subcontract sourcing both domestically and globally.
* Background in purchasing and negotiation.
* Strong understanding of a wide range of materials including timber, metal, and plastics.
* Familiarity with mixed manufacturing processes ideally mixed medium (timber, metal, plastics).
What's on offer:
* Competitive salary
* Life insurance
* On-site parking
* Sick pay
Apply today for this excellent opportunity to develop your career with a forward-thinking organisation.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Senior Manufacturing Engineer – Cell & Gene Therapy Systems – Cambridge
We are working with a leading medical devices and biotech company, based in Cambridge, to recruit a Senior Manufacturing Engineer who thrives on solving complex technical challenges across global teams. This role offers the opportunity to lead multiple projects that scale up advanced bioreactor and consumable systems, supporting commercial manufacturing across the UK, Europe, and occasionally further afield.
You will be responsible for transferring products from development into full-scale manufacture, ensuring quality and compliance with ISO 13485 standards. Your work will include instrument qualification, supplier alignment for CE and UKCA certification, and the creation of robust documentation, including SOPs and Work Instructions. You will collaborate closely with internal teams and external partners, acting as a key technical interface across continents.
We are seeking someone with a strong background in manufacturing engineering within biotech, medical devices, or automation. You will bring hands-on experience in product transfer, regulatory documentation, and customer-facing technical support. A degree in chemical engineering, biotechnology, or a related field is essential, along with a passion for continuous improvement and collaborative problem-solving.
This is an opportunity to join a company that is redefining how biotechnologies and medical devices are manufactured. You will be part of a team that values technical hobbies, mentoring, and global impact, with flexible working options and a culture that supports both professional and personal growth.
In return, you will receive a competitive salary, annual bonus, private healthcare, generous pension contributions, and access to a wide range of lifestyle and professional development benefits.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Senior Systems Engineer – Biotech Platform Development - Cambridge
A cutting-edge biotech company, based in Cambridge, are currently recruiting for a Senior Systems Engineer who will play a pivotal role in the development and delivery of next-generation medical diagnostics and biomanufacturing platforms. This is an opportunity to take technical ownership of complex, multidisciplinary systems and contribute to the translation of breakthrough IP into scalable, regulated products.
You’ll be working across engineering and R&D teams to support the design, integration, and commercialisation of semiconductor-based and biocomputing technologies. Your role will span product architecture, documentation to ISO 13485 standards, and hands-on delivery of systems that combine hardware, software, and biology. You’ll collaborate with internal stakeholders and external partners to align technical execution with broader programme goals.
We’re looking for someone with experience in systems engineering, product development, or technical project delivery within biotech, diagnostics, or medical devices. You’ll bring a solid understanding of regulated product development, and ideally some exposure to startup environments, IP creation, or cross-functional team collaboration. A background in mechanical, biomedical, or electronic engineering would be ideal.
In return, you will receive a competitive salary, annual bonus, private healthcare, generous pension contributions, and access to a wide range of lifestyle and professional development benefits.
This is a chance to join a company that values innovation, technical depth, and collaborative culture. You’ll be supported by experienced leaders and given space to grow into broader responsibilities as the company scales.
To learn more, contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your CV and a member of our team will be in touch.
....Read more...
Human Factors Design Engineer – Medical Devices – Oxford
A Medical Devices company, based in Oxford, is currently looking for a Human Factors Design Engineer to assist with the ongoing development of new Medical Devices.
Working alongside an established R&D team, your role will be of paramount importance in ensuring that product design adheres to Medical Devices standards, taking into account Product Development, Industrial Development, and Human Factors Development factors, specifically ISO 13485, ISO 14971, and IEC 62366 standards.
You will need to have prior experience in the Medical Devices sector, which could have been gained in industry or through PhD/Post Doc roles. We are open to candidates with varying levels of experience, and the salary range will be determined based on your experience.
Due to the nature of this company's work, you will be at the forefront of the medical devices sector, constantly learning new concepts and generating innovative ideas on a daily basis.
It is expected that you hold a degree in Human Factors, Industrial Design, Product Design, or another related subject that has led you to specialize in the Human Factors role, particularly in the Medical Devices sector.
You will be rewarded with an excellent starting salary, a bonus, career development opportunities, ongoing skills enhancement, and a wide range of benefits.
I anticipate a high level of interest in this role, so if you are interested, I recommend submitting your application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Job Title: Field Service Engineer
Location: Horsham Base/ International Travel Required
Contract Type: Permanent
Salary: £38,000 - £40,000 + Benefits
About the Role
We are seeking a skilled and motivated Field Service Engineer to join our team at Chess Dynamics. In this role, you will provide expert field support to our customers worldwide, ensuring the stable operation of our advanced hardware and software products such as fire control systems, naval electro-optical surveillance, and land/vehicle surveillance systems. You will be responsible for installing, configuring, maintaining, supporting, and optimizing these systems to ensure total customer satisfaction.
Key Responsibilities
- Perform offsite repairs, installation, and configuration of Chess products and systems at customer locations
- Deliver after-sales support, servicing, and maintenance to ensure system reliability
- Generate clear and detailed post-visit reports including situation analysis and recommendations
- Assess, strip-down, repair, and test customer returns requiring service
- Support sales team demos, trials, and prepare demo equipment for customer presentations
- Test and evaluate new equipment and sensors alongside Sales and Engineering teams
- Prepare risk assessments and safe systems of work (SSOW) for installations and commissioning
- Lead factory acceptance testing (FAT) and participate in other customer activities as required
- Contribute to continuous improvement initiatives within the Customer Services function
Skills & Experience
Essential:
- Experience maintaining complex electrical and mechanical systems within military environments (naval, army, air force)
- Strong knowledge of electronics, microcontrollers, servo tuning, radar, optics, and communications systems
- Proficient mechanical and electro-mechanical skills with hardware and software troubleshooting expertise
- Strong understanding of PC architecture, IP networking, software updates, and problem diagnosis
- Excellent interpersonal and commercial skills to manage customer relationships diplomatically and professionally
- Ability to work in challenging environments including outdoor, marine, and heights settings
- Willingness to travel worldwide at short notice and work extended hours as necessary
Desirable:
- Clean UK driving licence including class C1 for company vehicle use
- Current interest or knowledge in army/navy equipment and procedures
- Experience delivering maintenance and operator training to customers
- Previous Security Clearance (SC Level)....Read more...
The engineer will undertake and experience:
Training on multiple different system types.
Exposure to different manufacturers' equipment.
Working in and amongst a tight-knit, supportive team.
Learning a wide variety of transferable skills.
Working for a H&S certified company.
Being a part of major design and build projects.
Working for a supporting member of the ISCVE (Institute of Sound Communications & Visual Engineers).
The hours are flexible and will be split between the office, where we undertake both training, assembly, and programming of the equipment we install and varying locations where we either install VA systems or maintain them.
The role entails occasional evening or night work, but this is not usually extensive or prolonged. Being able to drive will be an advantage and will become essential.Training:This course will be one day per week at college and four days in the workplace. There will be required e-portolio work throughout the course.Training Outcome:Future career in the fire and security industry as an engineer.Employer Description:We are a West Yorkshire based company that operates across the UK. We undertake design, installation and commissioning works as well as providing maintenance services. Often replacing fire alarms sounders, these are the high-end choice clients prefer to enable fire evacuation from large or challenging locations. In addition to basic evacuation these systems are also usable for public address purposes and music solutions, and you will be trained and become skilled in these fields.Working Hours :Monday – Thursday: 9am – 5pm
Friday: 9am – 4pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Number skills,Team working,Non judgemental,Patience....Read more...
