We are looking for a motivated Systems Engineer to join our dynamic engineering team. You will help drive projects that deliver innovative, high performance automotive technologies.
Key Responsibilities
Capture, analyse, and manage system requirements
Support system architecture and design using MBSE principles (SysML, MATLAB, Simulink)
Collaborate across hardware, software, and mechanical teams
Contribute to system verification through test specification and results review
Maintain requirements traceability and documentation using tools like Siemens Polarion, Jira, and Confluence
Key Skills
Degree in a relevant engineering discipline
Experience in Systems Engineering or Requirements Management
Strong problem-solving and communication skills
Automotive industry experience
Familiarity with UML, SysML, MATLAB/Simulink
Understanding of electric or hybrid powertrains....Read more...
Senior ADAS Engineer required to join a team of Automotive Navigation and Driver Assist Software Developers to work on GNSS research, data, analysis, algorithmic development and product development.
Skills
C++
ADAS (Advanced Driver Assistance System) Programming experience.
Antenna, Signal Processing and Navigation Technology.
GNSS measurement engine signal processing.
Data analysis experience in Matlab.
Synthetic aperture processing
Spirent simulators, GNSS simulation and algorithm testing.
Kalman filters
Multi-sensor fusion techniques, including tight and deep coupling for GNSS-INS
RTK, PPP, multi-constellation positioning or multipath mitigation methods.
Role
Technical analysis of ADAS trials using simulation tools to derive insights to improvements software.
Propose, lead and participate in product research and development.....Read more...
Senior ADAS Engineer required to join a team of Automotive Navigation and Driver Assist Software Developers to work on GNSS research, data, analysis, algorithmic development and product development.
Skills
C++
ADAS (Advanced Driver Assistance System) Programming experience.
Antenna, Signal Processing and Navigation Technology.
GNSS measurement engine signal processing.
Data analysis experience in Matlab.
Synthetic aperture processing
Spirent simulators, GNSS simulation and algorithm testing.
Kalman filters
Multi-sensor fusion techniques, including tight and deep coupling for GNSS-INS
RTK, PPP, multi-constellation positioning or multipath mitigation methods.
Role
Technical analysis of ADAS trials using simulation tools to derive insights to improvements software.
Propose, lead and participate in product research and development.....Read more...
NPI Engineer – Clinical Diagnostics
Newton Colmore is representing a medical devices company based in Cambridge, recognised as an industry leader in novel clinical diagnostics technology. This organisation has built a strong reputation for delivering life-changing healthcare solutions through engineering and manufacturing excellence.
Due to continued growth and expansion of their product portfolio, they are seeking an experienced NPI Engineer to join their manufacturing transfer team.
The Role
This is a great opportunity for an NPI engineer to play a pivotal role in bringing innovative medical devices from concept through to commercial production. You will be at the heart of new product introduction (NPI) activities, working closely with cross-functional teams to ensure seamless product launches.
Key Responsibilities
Design for Manufacturing (DfM) & Transfer:
Lead design for manufacturing initiatives, working collaboratively with R&D teams to improve product designs for efficient, scalable production
Drive technology transfer activities from development through to full-scale manufacturing
Develop and implement manufacturing strategies for new product introductions
Conduct manufacturing feasibility assessments and risk analyses
Process Development & Optimisation:
Design, develop and validate manufacturing processes for medical device production
Create detailed manufacturing procedures, work instructions and quality control protocols
Implement lean manufacturing principles and continuous improvement initiatives
Support scale-up activities from pilot production to commercial volumes
Cross-functional Collaboration:
Partner with quality assurance teams to ensure regulatory compliance throughout the manufacturing process
Work closely with supply chain and procurement teams on vendor qualification and component sourcing
Collaborate with project management teams to ensure timely delivery of NPI milestones
Essential Requirements
Ideally around five years in manufacturing engineering within a medical devices or biotechnology environment. Flexible for the right candidate.
Proven experience in design for manufacturing and new product introduction
Strong knowledge of manufacturing processes including machining, assembly, and quality control systems
Experience with manufacturing transfer projects and scale-up activities
Understanding of medical device regulations (ISO 13485, FDA QSR, MDR) is highly desirable
Proficiency in CAD software and manufacturing analysis tools
Strong project management and cross-functional collaboration skills
Ideally educated to degree level in a relevant subject.
What's On Offer
Competitive salary commensurate with experience – flexible from mid-level to senior.
Comprehensive benefits package including bonus, healthcare, pension, and much more.
Opportunity to work with complex medical technology that makes a real difference to patients
Professional development opportunities and career progression
Cooperative, innovative working environment with world-class engineering teams
Next Steps
This is a confidential search being conducted on behalf of our client. For a discrete, confidential discussion about this exceptional opportunity, please contact:
Matt Lowdon Founder 0121 268 2240 / hello @ newtoncolmore . com
All applications will be treated in the strictest confidence. Due to the confidential nature of this search, only shortlisted candidates will be contacted with full company details.
We are committed to equal opportunities and welcome applications from all qualified candidates regardless of background.
....Read more...
During your apprenticeship, you’ll be embedded in Babcock's Skynet Service Delivery Wrap (SDW) programme. The Skynet system provides secure satellite communications to the UK and NATO armed forces, enabling personnel to stay connected anytime, in any environment, anywhere on Earth.
You’ll work four days a week from one of our key engineering locations – either Hawthorn (Corsham) or Oakhanger (Bordon) – where our teams help to maintain and modernise the UK’s sovereign space communications infrastructure. Accommodation expenses will be covered when travel away from your home base is necessary, including visits to Babcock locations such as Ashton House (Bristol).
As you progress, you’ll rotate through our Skynet SDW engineering teams, gaining insight into how each area supports the wider system. You’ll assist in a variety of technical tasks that grow in complexity as your skills and confidence develop. One day you might be supporting upgrades to communications systems on a Royal Navy warship; the next, testing advanced satellite devices or helping to redesign systems that integrate newly launched spacecraft. You may even help develop subsystem designs that enhance our satellite ground stations.
This is a role with real impact where you won’t just be gaining specialised engineering skills; you’ll be contributing to a mission that helps protect lives and maintain national security.
Training:
During your apprenticeship, you will study for a Bachelor of Engineering with Honours (BEng) in Space Systems Engineering through the University of Portsmouth.
Your academic studies will complement the work you’re doing in the business, with modules covering electronics, mechanical and electrical systems, software engineering and space communications. This blend of theory and practice will help you build a deep and practical understanding of how space systems operate and evolve. You’ll also develop valuable skills in systems engineering, hardware design, and coding.
During term time, you’ll typically spend one day per week at university and four days embedded in Skynet engineering activities. Additional study time will be provided during exam periods and for university project work, ensuring you have the support you need to succeed academically.
Training Outcome:
On successful completion of the apprenticeship programme, you will be invited to apply for one of a range of engineering opportunities within Babcock.
You’ll also have the opportunity to build on your progress toward professional registration as an Incorporated or Chartered Engineer, a recognised benchmark of engineering competence, which can support your journey into more advanced roles, such as Senior Engineer.
As a global organisation, Babcock provides countless opportunities to enhance your skills and advance your career. To support your growth, we’ve introduced the Babcock Role Framework, which outlines roles, career pathways, and development opportunities. With every job mapped to these frameworks, you’ll have a transparent view of the steps needed to reach Senior Engineer and beyond.
Employer Description:Babcock is an international defence, aerospace and security company operating in our focus countries of the UK, Australasia, Canada, France and South Africa, with exports to additional markets with potential to become focus countries. We meet our customers’ key requirements of affordability, availability, and capability by delivering engineering, support and critical systems to defence and civil markets.Working Hours :Monday to Friday 9am to 5pmSkills: Communication skills,Attention to detail,Team working....Read more...
Follow prescribed scoping methodologies to create accurate and detailed Statements of Work (SOWs) across cyber security services.
Participate in scoping calls with customers, initially shadowing senior consultants and gradually developing to independently lead discussions.
Collaborate with technical delivery teams to validate scoping accuracy and ensure client expectations are aligned with service capabilities.
Work closely with the Sales Team to provide structured technical input during the pre-sales process, ensuring opportunities are scoped correctly from the outset.
Support the continuous improvement of scoping frameworks and templates, providing feedback to enhance efficiency and accuracy.
Develop technical product and service knowledge to a level that enables clear, confident conversations with both technical and non-technical stakeholders.
Contribute to the handover process to PMO and Delivery teams, ensuring smooth transition from scoped engagement to delivery.
Training:Why choose our Cyber Security Engineer Level 4 apprenticeship?
The Cyber Security Engineer apprentice can help to design, build and test secure networks, security products or systems to help protect your organisation against cyber threats.
QA is a market leader in cyber security training, with a state-of-the-art immersive cyber gamified learning, giving apprentices a hands-on learning experience in simulating a real cyber threat.
QA's exclusive partnership with Circadence Corporation, the pioneer of the hands-on gamified learning platform Project Ares®, allows us to uniquely incorporate hands-on scenario training into our cyber security apprenticeships. The Project Ares platform offers a totally immersive experience, using automated features to support skills adoption with an in-game advisor, Athena, who advises our players through scenario-based challenges. The platform scenarios replicate the unpredictability and escalating levels of complexity that cyberattacks can present. It drives high levels of engagement through leaderboards and badges, elements used widely in the gaming world.
QA’s Cyber Security Engineer Level 4 apprenticeship programme enables the apprentice to:
Develop problem-solving and critical thinking skills in a safe, but realistic environment
Apply all of the acquired skills throughout the programme, with added scoring of players and opponent actions with replay for object assessment
Take part in hands-on training and active-learning models that increase retention rates by 75% so that cyber apprentices can prepare for real-world challenges
Tools and technologies learned:
Apprentices will learn to use Project Ares, Python, Microsoft Azure, Microsoft PowerShell, Linux and AWS.Training Outcome:90% of QA apprentices secure permanent employment after completing: this is 20% higher than the national average.Employer Description:Founded at the beginning of the dot.com bubble in 1996, our CEO Charles Nasser had a light bulb moment to develop a truly customer-focused IT business. Since then, Claranet has grown from an Internet Service Provider (ISP) in the UK to being one of the leading business modernisation experts, who deliver solutions across 11+ countries.
At Claranet, we’re experienced in implementing progressive technology solutions which help our customers solve their epic business challenges. We’re committed to understanding their problems, delivering answers quickly, and making a lasting impact to their business. We are agile, focused and experienced in business modernisation. Our approach helps customers make genuine, significant shifts in their business strategy, to deliver financial savings, boost innovation, and create a resilient business. We continually invest in our people and the latest technologies, so our customers get peace of mind knowing that they have access to the best talent and services.
In the UK we have over 500 staff working in London, Gloucester, Warrington, Bristol, and Leeds, or as homeworkers.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,Customer care skills,Analytical skills....Read more...
Senior Infrastructure Engineer
Central London
Up to £80k
Well-established, highly profitable construction engineering business is seeking an experienced Senior Infrastructure Engineer to join them on a permanent basis. You'll be joining at a critical time as the organisation expands its technical capability, with ambitious growth plans and multiple acquisitions planned every year for the next 5 years (8 in the past 12 months).
Reporting into the IT Operations Manager, you will oversee core infrastructure and networking. You'll work closely with managed service providers to ensure seamless operations and business continuity whilst taking a lead on regular site set-ups.
Key Responsibilities:
• Lead and manage office and site networks, aligning with business strategy
• Act as an escalation point for the Service Desk Team
• Set up and configure Local Area Networks (LANs), including hardware deployment and support
• Coordinate with third-party MSPs for network and infrastructure management
• Manage firewall operations and connectivity with ISPs
• Oversee network IP addressing and VPN setups
• Support business continuity through proactive incident management
• Rapid deployment of site connectivity solutions, including 4G routers
• Monitor network health and performance, ensuring high availability and resilience
• Maintain inventory and configuration records for infrastructure and software
• Collaborate with the Security Operations Center (SOC) on network security
• Support software licensing and upgrades
• Support data privacy and security audits
• Provide technical support and mentoring
• Maintain server rooms and ensure operational efficiency
• Develop and implement business processes and documentation
Requirements:
• Strong knowledge of Azure infrastructure management
• Strong in network protocols (TCP/IP, DHCP, DNS, etc.), ideally candidates must hold a CCNA/CCNP etc.
• Experience with FortiGate Firewalls and Windows Operating Systems
• Familiarity with WAN, LAN, VPN, and wireless networks
4 days per week onsite initially, dropping to 3 days after 3 months.
....Read more...
Mechanical Fitter Aylesbury Monday–Friday 8am–5pm (Early finish Friday)
£35,000 DOE
Training provided
Overtime (1.5x)
Early finish Friday
Company van and fuel card (available for personal use)
25 days annual leave + holiday purchase scheme
Death in service
Life assurance
Health cashback plan
Shares in business
Refer a friend scheme
The Mechanical Fitter Role We are seeking a Mechanical Fitter to join a leading multinational blue-chip company. This role is based on-site at a customer’s manufacturing facility and involves inspection, repair, and preventative maintenance of compressors, blowers, and pumping systems fitted to vehicles.Full training will be provided.
Key Responsibilities for the Mechanical Fitter role
Inspect, repair, and service equipment in line with manufacturer specifications and company standards.
Complete all required documentation, including reports, inspections, calibration checks, and job sheets.
Undertake maintenance, testing, and repair of hydraulic and pneumatic systems, pumps, compressors, motors, and ancillary equipment.
Read and interpret schematic drawings.
Provide breakdown assistance
Carry out additional tasks including onboard vehicle smart system maintenance, vessel integrity checks, light body repairs, and general vehicle repairs.
Ideal Backgrounds for our Mechanical Fitter We are particularly keen to hear from candidates with experience in:
HGV Fitter / HGV Technician
Plant Fitter
Hydraulic Fitter
Vehicle Technician
Aircraft Engineer
Compressor Engineer
Water treatment or pump engineering
Key Skills & Knowledge
Diagnostic analysis, repairs, and preventative maintenance.
Knowledge of hydraulics and pneumatics.
Hands-on fault-finding experience.
If you are interested in this Mechanical Fitter role, please apply now or contact Grace at E3 Recruitment....Read more...
Are you a technically minded salesperson who loves turning opportunities into lasting partnerships? Do you get a buzz from driving growth and seeing your efforts translate into real-world impact?Join Deeter Electronics Ltd, a UK-based engineering company with a global customer base, and help us bring our innovative electronic sensors to more industries worldwide.We're looking for a proactive Sales Engineer to lead the expansion of our reach, build strong customer relationships, and drive new business in a supportive, forward-thinking environment where your expertise truly makes a difference.Why Join Us
Be part of a growing company with a global reachWork with cutting-edge electronic productsEnjoy a flexible hybrid work modelMake a direct impact on business growth
Role Overview
We're seeking a technically qualified Sales Engineer who thrives on outbound sales and business development. You'll be responsible for identifying new opportunities, building relationships, and driving revenue growth through proactive outreach.Key Responsibilities
Generate new business through outbound sales activitiesIdentify and engage potential customers across relevant industriesPresent technical solutions and product offerings confidentlyCollaborate with internal teams to support customer needsMaintain accurate records of sales activities and pipeline
Requirements
A technical qualification (engineering, electronics, or related field)Proven experience in outbound sales or business developmentStrong communication and presentation skillsSelf-motivated and results-drivenWillingness to work in-office at least 2 days per week
Compensation
Base Salary: £30,000 - £40,000 per year (depending on experience)Commission: 7% on new business generated (capped at £30,000/year)Bonus:Performance bonus for exceeding £250,000 in new business annuallyAdditional bonus for strategic winsInterested in finding out more?Please apply here and we'll be in direct contact....Read more...
Senior Electronics Engineer – Medical Devices Invention – Warwick
A growing Medical Devices company are currently seeking an experienced Electronics Engineer to contribute to the invention and development of brand-new Medical Devices. Based in the Warwick area, you will be involved in developing cutting-edge technologies.
Working alongside physicists, mechanical engineers, scientists, and other Medical Devices experts, you will be involved in creating lifesaving and life-improving Medical Devices.
You should have a background in designing and developing Medical Devices to ISO 13485, IEC 62304, and EN 60601 standards.
It would be beneficial if you have experience on various types of Medical Devices during your career, such as Medical Robotics, Wearable Diagnostics, Injectable Treatment and other complex Medical Devices with electronics design at the core of the technology.
To be successful in the role, it is expected that you would hold a degree in electronics, physics, or other subject that enabled you to work on the electronics design of medical devices.
In addition to working on the latest areas of Medical Devices and Healthcare Technology, you will also be rewarded with an excellent starting salary, bonus, pension, healthcare, and other outstanding benefits that are not typically available with most companies.
This is an exciting role where you can focus on new types of Medical Devices, so I anticipate a lot of interest. If you are interested, I suggest you submit an application now or risk missing out.
You will be on-site five days a week; hybrid or remote working is not currently possible.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Biotech recruitment specialists Newton Colmore, on +44 121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Data Science, Machine Learning, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.....Read more...
DevOps Engineer – Global Engineering Company - Berlin (Remote)(Tech Stack: Kubernetes, AWS, Azure DevOps, GCP, Jenkins, Docker, GIT, CI/CD Pipelines, Linux)
Client:Our client, a well-known international renewable energy engineering company is seeking a talented DevOps Engineer to join its team in Berlin.
Our Client has over 10,000 employees worldwide and it leads the field in developing innovative solutions that harness the power of the sun, wind, and water. Due to a recent round of funding, they need three DevOps engineers to help design, deploy, and maintain its cloud infrastructure and DevOps processes.
If you are seeking exciting projects contributing to a sustainable future and an opportunity to work with the latest technologies this is the job for you!
Benefits:
Competitive salary: €70,000 - €95,000 + Bonus Benefits
Opportunity to work on exciting projects that drive positive change
Remote work options with flexible working hours
Comprehensive benefits package, including health insurance, retirement plan, and more
30 Days Annual Leave
Responsibilities:
Collaborate with development and quality assurance teams to develop, modify, and maintain our cloud infrastructure and DevOps processes
Implement and maintain automated CI/CD pipelines to ensure smooth deployment of microservices in test and production environments
Use Infrastructure-as-Code and GitOps technologies to maintain our Kubernetes clusters and infrastructure
Support the team in maintaining legacy applications hosted in Azure
(Familiarity with most of the following technologies: CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Requirements:
Strong knowledge of CI/CD tools (GitHub Actions, Jenkins, Bitbucket Pipelines, Azure DevOps, etc.) and version management tools (git)
Experience with public cloud environments (Azure, AWS, or GCP)
Knowledge of container technologies (Docker, Kubernetes, etc.) and Linux systems
Understanding of Infrastructure-as-Code (Terraform/OpenTofu, Ansible, etc.) and GitOps (e.g. Flux) technologies
(CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Fluent in English & German
Location: Berlin (Remote)
NOIRGERMANYRECNOIREUROPERECNOIREURNET
NC/TC/CLOBER7095....Read more...
Maintenance Supervisor | Schiphol, Netherlands I’m looking for a skilled Maintenance Supervisor to handle the maintenance operations at a busy international hotel near Schiphol. This is a hands-on, high-impact role where you will take full responsibility for maintaining the hotel’s facilities, ensuring everything runs smoothly to deliver a safe, comfortable, and seamless experience for guests. You will report directly to the Chief Engineer.You will carry out daily maintenance tasks, coordinate preventive and reactive work, and liaise with external contractors when needed. The ideal candidate is experienced in hotel maintenance, technically strong, and thrives in a fast-paced, high-volume environment.Perks & Benefits
Competitive salary and benefits packageOpportunities for professional development and trainingCollaborative and international work environmentAccess to hotel facilities during off-peak hoursEmployee discounts across hospitality and leisure services
Your Experience
Previous experience in maintenance within a hotel, resort, or large facilityStrong technical knowledge of electrical, plumbing, HVAC, and general building systemsExperience coordinating with contractors and managing maintenance tasks independentlyAbility to prioritise work and manage multiple projects efficientlyStrong communication skills in English; Dutch is a plusKnowledge of health, safety, and regulatory requirements within hospitality
Your Responsibilities
Perform hands-on maintenance tasks across all areas of the hotelCoordinate preventive maintenance schedules and respond to repair requests promptlyLiaise with contractors and suppliers for specialist maintenance or refurbishment projectsEnsure compliance with health, safety, and regulatory standardsMonitor maintenance budgets and report on operational performanceSupport the Chief Engineer and management team in planning upgrades or facility improvements
If you’re an experienced maintenance professional ready to take ownership of a high-performing hotel environment, please contact Clay at COREcruitment: clay@corecruitment.com....Read more...
Dive into the hands-on world of Civil Engineering design
You’ll be producing detailed drawings and technical models for crucial infrastructure projects, including state-of-the-art clean and wastewater treatment works, high-capacity pumping stations, and resilient pipeline networks
You'll be trained to master powerful industry software such as Computer Aided Design (CAD), especially AutoCAD Civil 3D, and GIS (Geographic Information Systems) to accurately map, model, and visualize solutions
Contribute to innovative and sustainable solutions - from concept to delivery - that reduce our environmental impact and future-proof our water supplies. This could involve pioneering flood risk reduction schemes or assisting with Nature-based Solutions.
You’ll assist Senior Engineers across the entire project lifecycle, working closely with multidisciplinary experts, including Mechanical and Electrical Engineers, to ensure that we are always delivering the most innovative and efficient solution for our clients
Training:
Civil Engineer Level 6 (Degree with honours) Apprenticeship Standard
Coventry University - Block Release
Training Outcome:
Civil Engineer, Project Management
Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, Shifts to be confirmed.Skills: Communication skills,Problem solving skills,Team working....Read more...
Dive into the hands-on world of Civil Engineering design. You’ll be producing detailed drawings and technical models for crucial infrastructure projects, including state-of-the-art clean and wastewater treatment works, high-capacity pumping stations, and resilient pipeline networks
You'll be trained to master powerful industry software such as Computer Aided Design (CAD), especially AutoCAD Civil 3D, and GIS (Geographic Information Systems) to accurately map, model, and visualise solutions
Contribute to innovative and sustainable solutions - from concept to delivery - that reduce our environmental impact and future-proof our water supplies. This could involve pioneering flood risk reduction schemes or assisting with Nature-based Solutions
You’ll assist Senior Engineers across the entire project lifecycle, working closely with multidisciplinary experts, including Mechanical and Electrical Engineers, to ensure that we are always delivering the most innovative and efficient solution for our clients
Training:
Civil Engineer Level 6
Coventry University - Block Release
Bristol, UWE - Day Release
Training Outcome:Civil Engineer, Project Management.
Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday to Friday, working hours TBCSkills: Communication skills,Problem solving skills,Team working....Read more...
You’ll be producing detailed drawings and technical models for crucial infrastructure projects, including state-of-the-art clean and wastewater treatment works, high-capacity pumping stations, and resilient pipeline networks
You'll be trained to master powerful industry software such as Computer Aided Design (CAD), especially AutoCAD Civil 3D, and GIS (Geographic Information Systems) to accurately map, model, and visualise solutions
Contribute to innovative and sustainable solutions—from concept to delivery - that reduce our environmental impact and future-proof our water supplies. This could involve pioneering flood risk reduction schemes or assisting with Nature-based Solutions
You’ll assist Senior Engineers across the entire project lifecycle, working closely with multidisciplinary experts, including Mechanical and Electrical Engineers, to ensure that we are always delivering the most innovative and efficient solution for our clients
Training:
Civil Engineer Level 6 (Degree with honours)
Coventry University - Block release
Training Outcome:
Civil Engineer, Project Management
Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, Shifts to be confirmed.Skills: Communication skills,Problem solving skills,Team working....Read more...
Dive into the hands-on world of Civil Engineering design
You’ll be producing detailed drawings and technical models for crucial infrastructure projects, including state-of-the-art clean and wastewater treatment works, high-capacity pumping stations, and resilient pipeline networks.
You'll be trained to master powerful industry software such as Computer Aided Design (CAD), especially AutoCAD Civil 3D, and GIS (Geographic Information Systems) to accurately map, model, and visualize solutions
Contribute to innovative and sustainable solutions from concept to delivery that reduce our environmental impact and future-proof our water supplies. This could involve pioneering flood risk reduction schemes or assisting with Nature-based Solutions.
You’ll assist Senior Engineers across the entire project lifecycle, working closely with multidisciplinary experts, including Mechanical and Electrical Engineers, to ensure that we are always delivering the most innovative and efficient solution for our clients.
Training:
Civil Engineer Level 6 (Degree with honours) Apprenticeship Standard
Coventry University - Block Release
Training Outcome:
Civil Engineer
Project Management
Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday, Shifts to be confirmedSkills: Communication skills,Problem solving skills,Team working....Read more...
Air Conditioning Engineer - London & Home Counties - Up to £50,000Exciting role to join a Leading National Maintenance Service provider that is looking to expand its operation and bring in a specialised Commercial Air Conditioning & Refrigeration engineer to supply this service to a mixture of commercial offices and high-end residential sites across London & Home Counties.You will be joining their current mobile maintenance team working across various high-end buildings carrying out Service and Breakdowns on Air conditioning, HVAC and refrigeration plant. You will be responsible for all commercial Air conditioning maintenance as well as general building services. Hours of Work Monday - Friday 08:00 am -17:00 pm. Hours of workMonday to Friday8:00 am to 17:00 pm1 in 8 CalloutPackageUp to £50,00025 days holiday + Bank holidaysPrivate use availableFurther trainingCompany pensionRequirementsNVQ Level 2 in Refrigeration & Air conditioning (Minimum)NVQ Level 3 in Refrigeration & Air conditioning (Desirable)Fgas 2079 Cat 1 (Essential)Experience within a Maintenance / Facilities Management environment.Knowledge of Health & Safety, Permit to Work procedures and safe systems of working.Capability to perform manual tasks, including manual handling, working at heights and in confined spacesOn-Call Rota.Good verbal and written communication is important, including the ability to use a mobile device.Self-motivated and solutions-focused with the ability to work without supervision but also enjoy working as part of a team.Full Driver's LicenseResponsibilitiesPPM & Reactive maintenanceAir conditioning and refrigeration - Service/maintenanceYour main duties will be service and maintenance on split systems, VRV's, VAV's and VRF's, AHU's, FCU's, Chillers and all HVAC and refrigeration plant.Electrical Knowledge would be beneficial.Extensive building services knowledgePlease send your CV today to Archie Reed at CBW Staffing Solutions to avoid missing the opportunity....Read more...
Junior Maintenance Engineer (Electrical or Mechanical) - FM Service Provider - Commercial Building - City of London- £35,000 - £40,000Are you looking for a way into maintenance?Are you looking for a role in Central London?Are you electrically or mechanically qualified?If the answer is yes, then read on....An exciting opportunity to join an established building services company based in London has arisen! CBW Staffing Solutions are currently recruiting a Junior Maintenance Engineer either of an electrical, mechanical, or plumbing background, to be based in a commercial building in the City of London. He or she or they will be required to carry out planned and reactive building maintenance alongside the maintenance team on site. This person will be working closely with a senior member of the team and the team on-site to gain experience and training of building services.The successful candidate will understand Facilities Maintenance and have some experience in building maintenance. In return, the company is offering a competitive salary of up to £40,000, overtime, plenty of further training and a potential route into further career progression. Hours of workMonday to Friday – 08:00 am to 17:00 pm25 days holiday + Bank holidaysOvertime availableFurther trainingCompany pensionKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 3 or mechanically City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceHard working attitudeGood communication skillsClient FacingIf you are interested please email your CV to Alex Denton of CBW Staffing Solutions....Read more...
Electrical Maintenance Engineer - Ayrshire- Salary up to £38,000 DOE We are looking for a skilled Electrical Maintenance Engineer to join our team. The successful candidate will possess strong electrical maintenance knowledge and have completed a recognised apprenticeship. The role focuses on maintaining the safe and continuous operation of electrical supplies, building systems, plant, and equipment. This role is based on a static site. Key Responsibilities:Perform both planned and reactive electrical maintenance tasks, ensuring timely resolution of issues to avoid contractual penalties.Create Method Statements and Risk Assessments for issuing Permits-to-Work.Perform tasks such as electrical system maintenance, emergency lighting checks, fire alarm tests, water and medical gas system upkeep, and pressure system maintenance.Complete all necessary reports, test certificates, and Task Assessment sheets both electronically and in hard copy.Work collaboratively with the Facilities Team Leader, assisting with equipment failures and organising the supply of goods/services as required.Participate in overtime work and an on-call rota to support maintenance activities.Travel to other sites as needed and liaise professionally with clients.Person Specification:Completed a recognised electrical apprenticeship with proven experience in electrical maintenance.Competency in building service systems, with a solid understanding of equipment operation.Experience in hospital maintenance is desirable but not essential.Knowledge of relevant safety regulations, including Scottish Health Technical Memoranda (SHTM), is desirable.First Aid and CPR training within the last three years, or willingness to undergo training.Due to the nature of the contract successful candidate must be able to obtain a Basic Disclosure Scotland certificate.Salary & Benefits:Salary up to £38,00024 days annual leave (+ public holidays)Life Cover equivalent to 1.5 times annual salaryEmployee discount shopping schemes on major brands and retailersGym membership discountsHoliday purchase scheme2 corporate social responsibility days per yearBroad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes....Read more...
Foot Mobile Maintenance Engineer - FM Service Provider - Foot Mobile - Up to £48,000 + Zones 1 & 2 Travel Card Exciting opportunity to work for a Growing FM service provider situated in London. CBW is currently looking for 1 x Foot Mobile Maintenance Engineer to cover a variety of sites in central London. The successful candidates will have a proven track record in commercial building maintenance. This is a Foot Mobile position and will require the successful candidates to attend a variety of sites where he or they will be required to carry out PPM/Reactive maintenance to electrical and mechanical plants with particular emphasis. In return, the company is offering a competitive salary paying up to £45,000 per annum based on experience/qualifications, overtime and further training. The company are expanding and looking for engineers to grow with them. Package & working hoursUp to £45-48,000Zones 1 & 2Monday to Friday - Hours: 08:00am to 17:00pmPDA's25 days holiday + Bank HolidaysOvertime availableTraining and development opportunitiesContributory pension schemeKey Duties & ResponsibilitiesEmergency lighting and fire alarm testingPumps, Motors, Seals, BearingsBooster sets Heating systems Air Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)General building fabricMonitor mechanical plantRequirementsElectrically Or Mechanically qualified - Level 2 or 3City & Guilds - 18th EditionYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsYou must be happy to work on a "Foot Mobile" basis and attend multiple sites (i.e. This is not a mobile role where a vehicle is provided)If you are interested please email your CV to Dan Barber of CBW Staffing Solutions ....Read more...
An exciting opportunity for a passionate and experienced Backend Engineer to join a dynamic and agile engineering team. As part of this role, you will have the opportunity to develop, maintain, and implement new features into company???s innovative platform. Your main focus will be on producing high-quality code and taking the lead on backend contributions, while also mentoring and assisting the wider team when needed.
Candidate Requirements
Extensive experience working with C# and .Net.
Proficiency in JavaScript and TypeScript.
Familiarity with version control systems like GIT.
Knowledge of CSS and its pre-processors.
If you are excited about working in a collaborative environment, tackling complex challenges, and making a significant impact, then we would love to hear from you.....Read more...
We are seeking an experienced Senior Commissioning Engineer to oversee our Testing and Inspection team. You will take a hands-on leadership role, managing testing, commissioning, and inspection of control panels both in-house and on-site, ensuring quality, compliance, and efficiency across all operations.
Key Responsibilities
Lead and mentor a team of technicians.
Oversee testing and commissioning of control panels (FAT and SAT).
Resolve technical queries and liaise with clients.
Conduct electrical fault-finding and ensure timely resolution.
Ensure compliance with ISO Quality, Environmental, and Health and Safety standards.
Requirements
Testing and Inspection Certification.
Hands-on experience in testing and inspection within water, wastewater, or process engineering.
Proven leadership and mentoring skills.
Strong fault diagnosis and technical problem-solving abilities.....Read more...
Join our team as a Senior GNSS Engineer in a leading telecommunication company. We're looking for someone to analyse Super correlation trials, collaborate with various teams, and enhance our software.
Key Responsibilities:
Analyse Super correlation trials with key partners.
Support data analysis from trials or simulations.
Maintain a deep understanding of Super correlation software.
Generate clear analysis reports and present to stakeholders.
Your Experience:
Academic or industrial experience in GNSS signal processing.
Understanding of GNSS measurement engine signal processing.
Experience in data analysis and problem-solving.
Proficiency in Matlab, source control
Product development experience.
Use of Spirent simulators for GNSS testing.
Expertise in Kalman filters and probabilistic estimation.
Strong programming skills in C++.
Experience in RTK, PPP, or multi-constellation positioning....Read more...
We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems.
Key Responsibilities
Proactively respond to any issues related to the engine or test site to ensure safety.
Assist in managing operations that involve hazardous materials.
Ensure that correct pressures are maintained in the feedlines during tests.
Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations.
Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests.
Required Skills and Competencies
Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization.
A proactive attitude toward safety and operational support.....Read more...
The role involves integrating telemetry systems with existing hardware and software, troubleshooting, providing technical support, and collaborating with clients to develop engineering solutions. The engineer will work on various client projects, including small projects, maintenance, and reactive support.
Key Responsibilities
Integrate and commission telemetry systems.
Develop and maintain technical documentation.
Conduct site surveys and provide technical support.
Collaborate with the team to optimise solutions.
Ensure adherence to quality, project timelines, and safety standards.
Troubleshoot telemetry-related issues.
Essential Requirements
18th Edition Wiring Regs
NVQ Level 3 in Electrical Installations or equivalent
Strong background in electrical engineering, preferably in control systems
Hands-on experience in installing electrical equipment
Proficient in interpreting electrical diagrams and schematics
Experience with telemetry outstations installation and commissioning
Full UK driving licence....Read more...
