Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
Senior Structural Engineer
Salary up to £55k (DOE)
25 days holiday + bank holidays
Company Pension Scheme
We have an exciting opportunity for an experienced structural engineer who is looking for a new challenge! Joining the existing team at Senior level, you will be integral to the business development as the practice grows. Working mostly in the residential and commercial sectors on a wide range of projects you will not only be able to put your existing experience to effective use but also be able to gain understanding and have full involvement in every aspect of a developing business! You will also benefit from the infrastructure and procedures already established.
Key Responsibilities
- Project review, fee proposal and tender document preparation for prospective clients at domestic and commercial level.
- Undertake inspections of existing buildings and site visits before and during construction to confirm design compliance and suitability for conversion.
- Oversee project delivery, budgeting, invoicing and client management.
- Act as technical lead, guide, and mentor the existing team.
- Alongside the Business Development Director promote working relationships with new and existing design practices, contractors and domestic enquiries to secure future projects.
- Assist as required in any marketing, HR and recruitment needs of the business
The Right Person
The successful Senior Structural Engineer will have experience in the following areas:
- A suitable engineering degree MEng/BEng in structural engineering, ideally with senior engineer or associate level experience and working towards chartership with the IStructE
- Proven technical knowledge and experience of delivering projects from concept design all the way through to tender stage
- Confident in managing others and willing to delegate and verify technical delivery as necessary to deliver the appropriate level of technical information per stage in line with project scope requirements
- Current experience of leading, managing and running, as the principal point of contact for structural engineering design projects
- Excellent knowledge of standard engineering practices, techniques, procedures, and Structural principles
Interested? Here are your options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionrecruitment.co.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.....Read more...
Mechanical Design Engineer
Located in Essex
up to £50k DOE + Benefits
Are you an experienced Mechanical Design Engineer looking for a new challenge? My Client is looking for someone to join their existing team to work on Design projects as part of a team and individually.
The design role will cover jobs from quick modifications to large scale Design Projects as well as R&D projects including creating all working drawings, assembly sketches and bills of materials.
On occasion you will be required to attend customer sites to partake in loading trials to evaluate designs. This role will suit a highly motivated person who has a broad skill set and has excellent and effective communication skills.
The Role:
- Validation of Design and specification
- Checking and approving of component and assembly drawings
- Set up manufacturing bills of materials and parts lists
- Create and issue engineering detail and assembly drawings for production release.
- Technical reporting and tolerance analysis
Minimum Skills / Experience Required:
- Degree/equivalent qualification or HNC and proven experience in Mechanical Engineering Design.
- Have current experience and the ability to design in Autocad 2D and Autodesk Inventor 3D format
- Experienced in standard methods of steel component fabrications and good engineering practice and a sound knowledge of welded fabrications
- Ability to calculate stresses and approve designs for manufacture (first principals is basic requirements)
- A good understanding of hydraulics, electrics, pneumatic systems and their installations.
- Be familiar with current C & U regulations and EU directives (Not essential)
About Precision People
Precision People is a leading recruitment agency that specializes in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across a wide range of industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership.
Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidates expectations.
Interested?
To apply for the Field Service Technician position, here are your two options:
1. "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Jon Webster on 0116 254 5411 between 8.30am - 5.30pm.
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know.....Read more...
To be responsible to the Service Manager but work at all times under the supervision of qualified persons and departments nominated by them.
Whilst being supervised, to assist trained qualified Service Engineers in the maintenance and repair of refrigeration, air conditioning and process plant within a pre-set timescale, with particular emphasis being placed on our approach toward Health and Safety.
To attend college as required, to achieve City & Guilds qualifications at both mechanical and technical level (a Level 3 Refrigeration, Air Conditioning and Heat Pump (RACHP) qualification) completing training schedules and workbooks as appropriate.
To liaise with office administration teams and engineers to ensure work is being carried out to their satisfaction.
To correctly complete work reports/time sheets on time to enable invoices to be submitted with minimum delay and to maintain regular contact with the service centre.
To comply with requirements of Health and Safety Practices as outlined in the Company Health and Safety procedure.
Any ad-hoc duties asked by the Service Manager.
Training:The Level 3 Refrigeration, Air Conditioning and Heat Pump (RACHP) Engineering Technician Apprenticeship Standard is run over 36 months. Apprentices must also achieve a Level 2 certificate in F Gas and ODS regulation category 1 to complete the course.
This standard is designed to meet the professional standards of the Engineering Council for registration as an Engineering Technician (EngTech) in partnership with the Institute of Refrigeration and CIBSE.Training Outcome:We develop the very best people within the UK’s HVAC industry through challenging and rewarding positions at Daikin Applied Service. Successful completion of this course could lead to a full-time position with J&E Hall.Employer Description:Daikin Applied Service has regional teams of trained and specialist HVAC engineers who carry out maintenance, servicing, retrofit and refurbishment tasks on chillers, air conditioning equipment and air handling units throughout the UK.
We develop the very best people within the UK’s HVAC industry through challenging and rewarding positions at Daikin Applied Service.Working Hours :May include some evening and weekend work (shifts to be confirmed).Skills: Communication skills,IT skills,Problem solving skills,Presentation skills,Number skills,Team working,Creative,Initiative,Interest in Engineering,Willing to learn....Read more...
Learning the Transfer Station and Material Recycling Facility processes and how they play an important role in the energy from waste process
Learning how to contribute to a positive Health, Safety and Environmental culture
Learning how to carry out routine inspections, safety checks and corrective maintenance
Learning how to carry out fault-finding and problem-solving of systems and equipment
Learning how to safely operate plant, equipment and machinery
Supporting Maintenance and Operations colleagues during breakdowns
Learning how to complete and submit quality reports to document the condition of assets and assist in the continual improvement of the facility
Training:The apprentice will take the full Level 3 Maintenance and Operations Engineering Technician apprenticeship with IPS, a leading apprentice provider in Rochester, Kent.
During the first year, training is delivered in 4-week blocks, full-time at IPS, with a week back at Cory between training learning more about the business and your role. Cory will pay travel costs to attend offsite training.
As an apprentice, you will work towards these qualifications:
Level 3 Advanced Manufacturing Engineering BTEC (in years 1 and 2)
Level 3 Engineering NVQ (in years 2 and 3)
Level 4 Engineering HNC (in years 3 and 4)
Training Outcome:On completion of the apprenticeship, you may move into one of these career paths:
Maintenance Fitter/Technician
Electrical Fitter/Technician
Electrical Controls and Instrumentation Fitter/Technician
Assistant Plant Operator
Employer Description:Cory is one of the UK’s leading resource management, recycling, and energy recovery companies. We use the River Thames as a green highway, saving around 100,000 truck movements a year – a vital way of getting traffic off the road and making London safer and less polluted.
As a river-based business, we are proud to support the growth of the Thames economy and the wider inland waterways sector.Working Hours :When working at Cory's Transfer Stations, the apprentice will work 40-hours per week on shifts. The typical shift for most apprentices is 7am to 4pm, but this can vary.
When at college, training times are typically Monday - Friday 9am to 5pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working....Read more...
Maintaining and continually improving housekeeping standards in engineering workshops, and when conducting tasks around the site
Development and execution of a planned preventative maintenance plan
Carry out reactive repair and improvement of selected equipmentUnderstand how and where to source spare parts and service contracts, with a view to continually improving performance while reducing costs
Maintain comprehensive equipment records, with details of repairs completed, root causes, and corrective actions
Comply with asset management performance targets set by group and site
Record performance to demonstrate adherence to KPIs
Engage with wider DS Smith engineering teams to ensure the site is fully compliant with all policies, and to stay fully informed of technical developments in the business
Management of maintenance & repair subcontractors
Training:
You will be in college 1 day per week and 4 days a week on site working with the Engineering and wider Operations Teams
For college you will be based at West Suffolk College
Training Outcome:Move into a full-time Engineering Technician role and progress from there.Employer Description:DS Smith is a leading provider of sustainable fibre-based packaging worldwide, which is supported by recycling and papermaking operations. We play a central role in the value chain across sectors including e-commerce, fast moving consumer goods and industrials.
Through our purpose of ‘Redefining Packaging for a Changing World’ and our Now and Next sustainability strategy, we are committed to leading the transition to the circular economy, while delivering more circular solutions for our customers and wider society – replacing problem plastics, taking carbon out of supply chains and providing innovative recycling solutions. Our bespoke box-to-box in 14 days model, design capabilities and innovation strategy sits at the heart of this response.
Headquartered in London and a member of the FTSE 100, DS Smith operates in 34 countries employing around 30,000 people and we are a Strategic Partner of the Ellen MacArthur Foundation. Our history can be traced back to the box-making businesses started in the 1940s by the Smith family.Working Hours :Monday to Friday 9am to 5pm, shifts, may work evenings and weekends.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Maintaining and continually improving housekeeping standards in engineering workshops, and when conducting tasks around the site
Development and execution of a planned preventative maintenance plan
Carry out reactive repair and improvement of selected equipmentUnderstand how and where to source spare parts and service contracts, with a view to continually improving performance while reducing costs
Maintain comprehensive equipment records, with details of repairs completed, root causes, and corrective actions
Comply with asset management performance targets set by group and site
Record performance to demonstrate adherence to KPIs
Engage with wider DS Smith engineering teams to ensure the site is fully compliant with all policies, and to stay fully informed of technical developments in the business
Management of maintenance & repair subcontractors
Training:
You will be in college 1 day per week and 4 days a week on site working with the Engineering and wider Operations Teams
For college, you will be based at Wiltshire College
Training Outcome:Move into a full-time Engineering Technician role and progress from there.Employer Description:DS Smith is a leading provider of sustainable fibre-based packaging worldwide, which is supported by recycling and papermaking operations. We play a central role in the value chain across sectors including e-commerce, fast moving consumer goods and industrials.
Through our purpose of ‘Redefining Packaging for a Changing World’ and our Now and Next sustainability strategy, we are committed to leading the transition to the circular economy, while delivering more circular solutions for our customers and wider society – replacing problem plastics, taking carbon out of supply chains and providing innovative recycling solutions. Our bespoke box-to-box in 14 days model, design capabilities and innovation strategy sits at the heart of this response.
Headquartered in London and a member of the FTSE 100, DS Smith operates in 34 countries employing around 30,000 people and we are a Strategic Partner of the Ellen MacArthur Foundation. Our history can be traced back to the box-making businesses started in the 1940s by the Smith family.Working Hours :Monday to Friday 9am to 5pm, shifts, may work evenings and weekends.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Maintaining and continually improving housekeeping standards in engineering workshops, and when conducting tasks around the site
Development and execution of a planned preventative maintenance plan
Carry out reactive repair and improvement of selected equipmentUnderstand how and where to source spare parts and service contracts, with a view to continually improving performance while reducing costs
Maintain comprehensive equipment records, with details of repairs completed, root causes, and corrective actions
Comply with asset management performance targets set by group and site
Record performance to demonstrate adherence to KPIs
Engage with wider DS Smith engineering teams to ensure the site is fully compliant with all policies, and to stay fully informed of technical developments in the business
Management of maintenance & repair subcontractors
Training:
You will be in college 1 day per week and 4 days a week on site working with the Engineering and wider Operations Teams
For college, you will be based at Wiltshire College
Training Outcome:Move into a full-time Engineering Technician role and progress from there.Employer Description:DS Smith is a leading provider of sustainable fibre-based packaging worldwide, which is supported by recycling and papermaking operations. We play a central role in the value chain across sectors including e-commerce, fast moving consumer goods and industrials.
Through our purpose of ‘Redefining Packaging for a Changing World’ and our Now and Next sustainability strategy, we are committed to leading the transition to the circular economy, while delivering more circular solutions for our customers and wider society – replacing problem plastics, taking carbon out of supply chains and providing innovative recycling solutions. Our bespoke box-to-box in 14 days model, design capabilities and innovation strategy sits at the heart of this response.
Headquartered in London and a member of the FTSE 100, DS Smith operates in 34 countries employing around 30,000 people and we are a Strategic Partner of the Ellen MacArthur Foundation. Our history can be traced back to the box-making businesses started in the 1940s by the Smith family.Working Hours :Monday to Friday, 9am to 5pm, shifts, may work evenings and weekends.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Maintaining and continually improve housekeeping standards in engineering workshops, and when conducting tasks around the site
Development and execution of a planned preventative maintenance plan
Carry out reactive repair and improvement of selected equipmentUnderstand how and where to source spare parts and service contracts, with a view to continually improving performance while reducing costs
Maintain comprehensive equipment records, with details of repairs completed, root causes, and corrective actions
Comply with asset management performance targets set by group and site
Record performance to demonstrate adherence to KPIs
Engage with wider DS Smith engineering teams to ensure the site is fully compliant with all policies, and to stay fully informed of technical developments in the business
Management of maintenance & repair sub-contractors
Training:
Mechatronics Maintenance Technician Level 3 Apprenticeship Standard
You will be in college 1 day per week and 4 days a week on site working with the Engineering and wider Operations Teams
For college you will be based at Heart of Yorkshire, Castleford Campus
Training Outcome:
Move into a full-time Engineering Technician role and progress from there
Employer Description:DS Smith is a leading provider of sustainable fibre-based packaging worldwide, which is supported by recycling and papermaking operations. We play a central role in the value chain across sectors including e-commerce, fast moving consumer goods and industrials.
Through our purpose of ‘Redefining Packaging for a Changing World’ and our Now and Next sustainability strategy, we are committed to leading the transition to the circular economy, while delivering more circular solutions for our customers and wider society – replacing problem plastics, taking carbon out of supply chains and providing innovative recycling solutions. Our bespoke box-to-box in 14 days model, design capabilities and innovation strategy sits at the heart of this response.
Headquartered in London and a member of the FTSE 100, DS Smith operates in 34 countries employing around 30,000 people and we are a Strategic Partner of the Ellen MacArthur Foundation. Our history can be traced back to the box-making businesses started in the 1940s by the Smith family.Working Hours :Monday - Friday, 9.00am - 5.00pm, shifts, may work evenings and weekends.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
RPS employs over 150 staff in Newark working on high profile building and engineering projects throughout the UK for blue chip clients.
For this role you should have a keen interest in the built environment and a career in Architecture or Civil/Structural engineering
Duties will include, but will not be limited to:
Produce drawings and Revit models for detailed design for each phase of building construction including planning, tender and final issue.
Produce drawings and models for the use in site design and development.
Manage the control and distribution of both internal and external contractor drawings.
Training:
You will be undertaking the Civil Engineering Technician Standard Level 3 which awards a Pearson BTEC Level 3 National Diploma in Civil Engineering (603/1217/8)
In addition to the Apprenticeship Standard you will receive the following training:
1 week induction
In-house training on all company policies and procedures.
In-house AutoCAD and Revit Training
Will be supported by mentor within team
This Apprenticeship is delivered on a day-release basis as 4 days in the Employer workplace and 1 day attendance at Lincoln College
Training Outcome:This role will become permanent for the right candidate on successful completion of the apprenticeship. Employer Description:RPS is a leading multi-disciplinary consultancy with the expertise to support clients through the development process, from planning to design to implementation.
We are acknowledged as experts in planning, transport, landscape and environmental consultancy and we are award winning architects, civil, structural and mechanical and electrical engineers. RPS has grown into one of the world’s preeminent consultancies by maintaining its local connections whilst underpinning these with the resources and knowledge of a global business.
We employ 5,000 people in the UK, Ireland, the Netherlands, the United States, Canada, Brazil, Africa, the Middle East, Australia and Asia.
Our international presence allows us to undertake co-ordinated and integrated projects throughout the world.Working Hours :8.30am - 4.30pm, days to be confirmed. 37.5 hours per week. Flexible working may be required in the future.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Willingness to Learn,Ability to work Independently....Read more...
Recruit4Staff are proud to be representing their client, a well-established engineering business in there search for a Mobile Service Engineer to work in there leading facility in Bridgnorth.For the successful Mobile Service Engineer our client is offering:
Competitive basic salary of up to £37,440 - £18 per hour DOE, excellent earning potential!Monday to Thursday 7am-5pm with a 11:30am finish on FridaysA permanent position within an expanding engineering businessRegular overtime opportunities available paid at premium rates of x1.5 Company van is providedFully paid working away package when staying away with company credit card4 weeks of holidays
The role - Mobile Service Engineer:
Installation & commissioning of products that have been fabricatedInstallation of Access ramps / Platforms at train stations all over the CountryCarrying out required repairsProviding technical assistance to customersThis role will involve working away, durations can vary. 1 week you might be away for 1 night and 1 week you could be away Monday to FridayWorking at HeightsUsing a variety of hand / power tools
What our client is looking for in a Mobile Service Engineer:
Flexibility in regards to UK wide travel and overnight stays (These are fully expensed with company credit card)Valid passport and a clean UK driving licence Possess good all round Engineering knowledgeHydraulic and pneumatic experience- ESSENTIAL Electrical/ Mechanically biased 50/50- ESSENTIAL Two phase electrical experience- ESSENTIAL Machine building experience- ESSENTIAL Panel wiring experience- ESSENTIAL Highly beneficial to possess MEWP / Working at Heights qualification
Commutable from:Telford, Bridgnorth, Shrewsbury, Wolverhampton, Kidderminster, Stourbridge, Dudley, Shifnal, BroseleyKey Skills or Similar Job Titles:Site Engineer, Service Engineer, Field Service Engineer, Engineering, Maintenance, Installation Engineer, InstallsFor further information about this and other positions please apply now. This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business.....Read more...
A global engineering and animation company is seeking a Senior Product Manager to communicate value propositions for their cutting-edge technology products. The Senior Product Manager will be responsible for liaising between engineering teams and commercial teams.
Key job responsibilities
Provide first line technical support to the company and internationally, using various methods: telephone, email, desktop sharing and IM
Create content for effective internal and external support or promotional purposes - documentation, website FAQ, tutorials, videos and working examples using 3rd party software
Test new software and hardware to quality assure the company products for release
Assist the Sales team by developing effective demonstrations to prospective clientele
Customer Software Support skills
Able to undertake domestic and international travel
Excellent presentation skills
Self motivated and resourceful in finding solutions by working with others
Good computer skills using a variety of Windows desktop applications....Read more...
A global engineering and animation company is seeking a Senior Product Manager to communicate value propositions for their cutting-edge technology products. The Senior Product Manager will be responsible for liaising between engineering teams and commercial teams.
Key job responsibilities
Provide first line technical support to the company and internationally, using various methods: telephone, email, desktop sharing and IM
Create content for effective internal and external support or promotional purposes - documentation, website FAQ, tutorials, videos and working examples using 3rd party software
Test new software and hardware to quality assure the company products for release
Assist the Sales team by developing effective demonstrations to prospective clientele
Customer Software Support skills
Able to undertake domestic and international travel
Excellent presentation skills
Self motivated and resourceful in finding solutions by working with others
Good computer skills using a variety of Windows desktop applications....Read more...
EV Project Manager – Surrey
Location: Hybrid working, locatable to Surrey and travel to customer sites
Salary; up to £60K + F/E Car + Bens
Driving licence required.
Environment:- EV, Solar, Energy, Engineering, RAMS, Site Surveys, CDM, Electrical, Battery Storage, Construction, G98/G99, DNO Approvals, Project Plans, Jira, MS Project, CAD, Pricing, Quotations, Contractors, SMTS, CSCS Card.
My client, a provider of Energy, EV and Solar systems are seeking a highly motivated and driven individual, as an EV Engineering Project Manager, to support the sustainability ambitions of a diverse range of customers.
You would be a proven engineering Project Manager with experience in the Energy, Solar, EV or Battery Storage industry.
You would ideally have the SMTS certification and used to working with civils, electricians and construction contractors on sites as well as managing all risk and H&S potential issues. Scoping and quotations from surveys would be expected as well as understanding and working with CAD drawings.
Responsibilities will include:
Planning and scheduling the deployments of the award winning product across the UK.
Negotiating with sub/contractors, managing project budgets and minimising project costs. Minimising Project Risk and procuring RAMS and other relevant safety documentation.
Managing, encouraging & maximising value of subcontractors and other resources. Continuously reviewing and being challenging of budget items.
Managing & implementing CDM 2015 roles & activities.
Producing accurate and detailed supporting project documentation
The role will be home based and around the Surrey area but travel will be required UK wide.
Apply now for full details.
@mecscomms: uniting opportunity with ambition in Telecoms | Media | Technology
@mecscomms is the brand name of MECS Communications Ltd who provide permanent & contract recruitment consultancy service as an Employment Agency & Employment Business.
For more information or a list of current vacancies, please see our web site at mecscomms.co.uk....Read more...
Manual Machinist
Manual Machinist Salary: £16 - £19
*This role requires the permanent right to work in the UK, applications without this will be automatically rejected, thank you.*
Company Overview:
A precision engineering company with decades of experience, specialising in providing high-quality machined components to industries such as aerospace and defence. The company is known for its commitment to stringent quality standards, utilising state-of-the-art manufacturing techniques to produce parts with exceptional accuracy. Its services range from CNC and manual machining to assembly and finishing, with a focus on delivering reliable and durable solutions. It is currently seeking a skilled & versatile Manual Machinist with Assembly skills to help keep up with the workload.
Daily Responsibilities:
As a Manual Machinist, your main duties will include:
- Operating manual lathes and mills, with use of XYZ machines.
- Ensuring precise machining, working to tight tolerances, and producing excellent surface finishes both internally and externally.
- Cutting threads and spot-facing on manual machines.
- Reading and interpreting engineering drawings.
- Inspecting machined components using bore comparators, micrometers, vernier callipers, and air gauges.
What Else:
- This Manual Machinist role requires adaptability to cover various departmental tasks, especially during single-point failures.
- Experience within the aerospace sector and a solid understanding of AS9100 standards and material traceability is essential.
- Further training will be provided for assembly-related tasks, making it an excellent opportunity for skilled machinists looking to diversify their abilities.
- A Manual Machinist should be time-served or apprentice-trained, with a high level of experience in manual machining and fitting techniques.
- £16-19 hourly rate on offer.
What Next?
Apply now or contact Hayden at Holt Engineering on 07955 081 482 for more information on the Manual Machinist Position.....Read more...
A globally leading chemical manufacturing company located in Lincolnshire is seeking a Mechanical Engineer to join their team, offering a salary of up to £65,000 per annum. The comprehensive benefits package includes a double-figure pension, annual bonus, hybrid working options, private medical insurance, and 25 days of annual leave plus bank holidays.As a Mechanical Engineer you will provide technical insights on inspection findings for static and rotating equipment, ensuring repairs comply with codes, and proactively managing asset replacements to minimise plant downtime.Collaborating with Reliability Engineers, you'll improve plant reliability by addressing underperforming equipment or processes. Proficiency in occupational and process safety is vital, given the multi-disciplinary nature of working in a COMAH site. Additionally, you'll oversee maintenance within designated areas, adhering to relevant standards.Mechanical Engineer Responsibilities
Manage small projects, whether they involve capital or operational expenses.
Serve as a resource for maintenance supervisors, offering expertise in troubleshooting complex issues.
Analyse maintenance costs to identify areas for improvement.
Perform engineering design calculations as required to support the maintenance team.
Provide specialised assistance in managing reactive maintenance repair issues.
Develop Statements of Work (SOW) for the Reliability and Projects teams to address long-term solutions.
Assist the Maintenance Coordinator in optimising the execution of scheduled maintenance tasks.
Demonstrate proficiency in diagnosing faults and conducting equipment repairs.
We are seeking a motivated individual with a Mechanical Engineering degree, preferably chartered, along with knowledge of UK Health and Safety legislation, ideally NEBOSH Certificate qualified, and experience in high-quality maintenance engineering within chemical manufacturing.Please apply direct for further information regarding this Mechanical Engineer opportunity.....Read more...
CNC Turner
CNC Turner Salary: £34,000£36,000 per annum
Location: Sherborne, Dorset, DT9
Company Overview
Our client is a precision engineering company with over 55 years of experience in manufacturing high-quality machined components. Specialising in CNC machining, they serve industries including medical devices, aerospace, energy, and scientific instrumentation. With a modern, clean, and well-equipped workshop, they have seen significant growth and continue to expand, offering excellent working conditions and career stability for a skilled CNC Turner.
CNC Turner Responsibilities
- Programming, setting, and operating FANUC-controlled CNC turning centres.
- Working with a variety of machines, including single spindle, twin spindle, B-axis mill/turn, and sliding head CNC machines.
- Ensuring all work meets high precision and quality standards.
- Adhering to health and safety regulations and company policies.
CNC Turner Requirements
- Proven experience as a CNC Turner in a precision engineering environment.
- Knowledge of difficult-to-machine materials is advantageous.
- Able to program from scratch.
- A positive approach and flexible attitude.
- Ability to work independently and as part of a team.
- Must have the right to work in the UK and live within a commutable distance.
CNC Turner Benefits
- Flexible working options 4-day week available or you can work 4.5 days with an early finish on a Friday, its up to you!
- Stability with an increasing workload across multiple sectors, you wont be short for work.
- Work in a laid-back, family-run business that values its teamno micromanagement, just a supportive environment where you're trusted to do your job and given the help you need to succeed.
- Company pension scheme.
- Extra holiday entitlement for long service.
How to Apply for the CNC Turner Role
Apply now or if youd like more information on the CNC Turner position, call or message Hayden at Holt Engineering on 07955 081 482.....Read more...
A contractor specializing in civils is seeking an experienced Civil Engineer to join their team in Nashville, Tennessee.Salary: $100,000 - $120,000 (negotiable) with 10-15% bonuses twice yearlyKey Responsibilities:Project Management: Oversee and manage civil engineering projects, ensuring timely completion and adherence to budgets. Civil Site Design: Design and implement civil site projects, including subdivisions and commercial developments. Storm Drainage Design: Develop effective storm drainage systems to manage water flow and mitigate flooding. Utility Design: Plan and execute utility designs, ensuring compliance with regulations and standards. Parking and Road Design: Create efficient designs for parking lots and roadways to facilitate optimal traffic flow.The company are open to hiring:
Project Manager/PE with 5+ years experience
PE with 2-5 years experience
Young PE with 0-2 years experience
Anywhere from around 5 years of experience with a PE license or ability to get 1 within a year.
Experience in Civil Engineering: Proven track record in civil site design and project management.
Technical Skills: Proficiency in software related to civil engineering design and analysis.
Communication Skills: Strong verbal and written skills for effective collaboration with stakeholders.
What We Offer:
Performance Bonuses: Top performers are eligible for up to $35,000 in additional bonuses.
Please apply with your most up to date CV or reach out to Josh.sartain@cornerstone-projects.co.uk with any information you require for this role....Read more...
A contractor specialising in Facade is seeking an experienced Façade Engineer (Hybrid) to join their team in Aylesford, Kent.
Salary: £45,000 - £50,000 per annum plus benefits Working hours: 7am–4pm or 8am–5pm Location: Candidates must be able to work on-site in Aylesford at least 1–2 days per week.
Benefits Include
30 days' holiday including bank holidays
Company bonus scheme
Contributory and salary sacrifice pension schemes
Private healthcare (upon successful completion of probation)
Free food provision on-site
Cycle to work scheme (post-probation)
Holiday cash-in scheme
Professional development and training opportunities
On-site parking
Key Responsibilities
Prepare façade design documentation using relevant engineering software.
Conduct structural and thermal analyses in accordance with applicable standards.
Contribute technical input and develop innovative façade solutions.
Collaborate with the Technical Manager and other project stakeholders.
Produce high-quality documentation and ensure alignment with company standards.
Lead or participate in external meetings, coordinating with consultants and designers.
Independently manage tasks while ensuring project deadlines and quality targets are met.
Qualifications & Experience
Degree in Façade Engineering, Civil Engineering, or a related discipline.
Strong technical background in façade design for residential and commercial projects.
Proficient in producing technical drawings, calculations, and specifications.
Demonstrated ability to provide technical expertise to architects and design teams.
Excellent problem-solving and communication skills.
Interested applicants are invited to apply by submitting their most up-to-date CV.....Read more...
Gaining skills in programming, setting and operating CNC machines
Training in manual machine tool setting and operating
Optimisation and problem solving techniques
Understanding of engineering drawings, geometric dimensioning and tolerancing (GDT)
Liaising with other areas of the business to understand their requirements
Learn and understand about machining principles, materials science, and relevant industry standards
Training:An apprenticeship allows you to earn a wage, gain valuable work experience and industry specific competence. You will be expected to work towards the Machining Technician Level 3, with support from your employer and the Chesterfield College Group.Training Outcome:Full time position with the company.Employer Description:Gibson Technology has created a global reputation for excellence in both performance and reliability in designing, developing, and manufacturing race systems encompassing engines, electronics, and electronic gearshift systems. We are a world leading manufacturer of high performance LMP2 powertrains, dedicated to delivering exceptional quality and engineering
solutions.
This vast experience has developed into an enviable track record in solving complex engineering challenges for race teams and race series worldwide.
Our achievements can be attributed to our highly skilled and committed workforce, delivering excellence and innovation with many years’ experiences at the highest level of motorsport, providing solutions to race teams across the world.Working Hours :Monday to Friday, 8.30am to 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
Ensure timely attendance to courses as agreed with management
Ensure that any work is completed to a satisfactory standard and handed in on time
Use Microsoft Desktop applications such as Outlook, Word, Excel and Teams
Production of functional design specifications (FDS)
Develop software applications for Programmable Logic Controllers (PLC’s) and Human Machine Interface (HMI) applications
Fully test all developed applications ready for commissioning at client premises.
Work proactively as part of a team
Training:
Training schedule hasn’t been agreed yet
Training Outcome:A successful apprentice will progress further onto higher education, with the potential to gain a BEng Tech (Hons) in Instrumentation and Control Engineering.
In addition to formal qualifications the apprentice will develop skills to allow them to progress from apprentice to junior engineer and then onwards to become a Control Systems Engineer with a broad range of skills.
Employer Description:We are March……… the UKs leading provider of critical engineering services.
Our expertise as a multi-disciplinary engineering partner across infrastructure, process and digital services has led to long term partnerships with leading organisations in everything from food and drink and utilities to high-security industries such as defence, aerospace and nuclear.Working Hours :Monday to Friday 8:00am to 5pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Ensure timely attendance to courses as agreed with management.
Ensure that any work is completed to a satisfactory standard and handed in on time.
Use Microsoft Desktop applications such as Outlook, Word, Excel and Teams.
Production of Electrical Schematic Drawings.
Selection of Electrical Components.
Assist in co-ordinating the life-cycle of a project with the production team.
Work proactively as part of a team.
Training:Training schedule hasn’t been agreed yet.Training Outcome:A successful apprentice will progress further onto higher education, with the potential to gain a BEng Tech (Hons) in Electrical and Electronic Engineering.
In addition to formal qualifications, the apprentice will develop skills to allow them to progress from apprentice to junior engineer and then onwards to become an Electrical Engineer with a broad range of skills.Employer Description:Automated Control Solutions Ltd (trading as March)
We are March……… the UKs leading provider of critical engineering services.
Our expertise as a multi-disciplinary engineering partner across infrastructure, process and digital services has led to long term partnerships with leading organisations in everything from food and drink and utilities to high-security industries such as defence, aerospace and nuclear.Working Hours :Monday to Friday between 8am to 4pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
An exciting opportunity has arisen for an experienced CNC Programmer with 3 years' experience to join a well-established engineering firm. This full-time, permanent role offers excellent benefits and a salary range of £35,000 - £40,000 working Monday - Friday.
As a CNC Programmer, you will be reading technical drawings to produce precision components across various sectors, utilising your expertise to program and operate CNC machining centres.
You will be responsible for:
? Programming and operating CNC milling machines using industry-standard controls and software
? Setting up machines, tools, and fixtures for efficient production.
? Reading and interpreting engineering drawings to produce precision components.
? Collaborating with technical teams to translate CAD models into workable programmes.
? Performing basic maintenance to ensure smooth machine performance.
? Identifying and resolving issues during machining processes.
What we are looking for:
? Previously worked as a CNC Programmer, CNC Operator, CNC Setter, CNC Turner, CNC Machinist, CNC Miller or in a similar role.
? At least 3 years' experience in CNC programming and milling.
? Solid understanding of mechanical engineering principles.
? Skilled in using Siemens or Fanuc control systems and CAD / CAM software to program 3 axis milling machines.
What's on offer:
? Competitive salary
? 22 days holidays plus bank holidays
? Company pension
? Bonus scheme
? On-site parking
? Overtime availability
Apply now for this exceptional CNC Programmer opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are a....Read more...
An exciting opportunity has arisen for an experienced CNC Operator / VMC Machinist to join a well-established engineering firm. This role offers excellent benefits and a salary range of £16 - £20per hour for 40-hour work week.
As a CNC Operator / VMC Machinist, you will be operating, programming and setting CNC milling machines to manufacture high-precision components using multi-axis capabilities.
You will be responsible for:
? Performing routine engineering tasks to support daily production.
? Conducting quality checks using appropriate measuring tools.
? Maintaining a clean and organised workstation and machinery.
? Ensuring all components are machined within required tolerances.
What we are looking for:
? Previously worked as a CNC Programmer, CNC Operator, CNC Setter, CNC Turner, CNC Machinist, CNC Miller, VMC Machinist, VMC Programmer, VMC Operator, VMC Setter, or in a similar role.
? At least 6 years' experience in CNC milling.
? Background in CNC programming and general engineering work.
? Sound knowledge of OneCNC programming software and different materials.
? Understanding of technical drawings, materials, and tooling.
? Skilled in using Heidenhain or Siemens control systems.
What's on offer:
? Competitive salary
? Company pension
? Performance bonus
? On-site parking
Apply now for this exceptional CNC Operator opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
....Read more...
An exciting opportunity has arisen for an experienced CNC Miller to join a well-established engineering firm. This role offers excellent benefits and a competitive salary.
As a CNC Miller, you will be programming, setting, and operating multi-axis CNC milling machinery to produce complex, high-accuracy parts for the Motorsport, Formula 1, Aerospace, and Defence industries.
You will be responsible for:
? Developing and refining CNC programs using Hypermill and Alphacam.
? Working with intricate components and high-performance materials to fine tolerances.
? Interpreting engineering drawings and translating specifications into production-ready processes.
? Conducting visual and measurement inspections to maintain strict quality standards.
? Coordinating closely with quality and engineering teams to ensure precision and productivity.
? Carrying out basic machine maintenance and ensuring the work area remains clean and hazard-free.
What we are looking for:
? Previously worked as a CNC Miller, CNC Programmer, CNC Setter, CNC Operator or in a similar role.
? Understanding of 3-axis, 4-axis, and 5-axis machining.
? Knowledge of CNC milling machines such as Haas, DMG, or YCM.
? Skilled in using Hypermill and Alphacam CAM software.
What's on offer:
? Competitive salary
? 25 days plus bank holidays
? Company pension
? Bonus scheme
? On-site parking
? Overtime availability
? Opportunities for career progression
Apply now for this exceptional CNC Miller opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the co....Read more...
