Operate recycling machinery, including granulating and shredding, to process a range of rigid plastic materials such as buckets, bins, crates, and manufacturing scrap.
Feed plastic waste safely and efficiently onto conveyors to maintain consistent production flow.
Monitor machinery during operation and perform basic troubleshooting to prevent downtime.
Move materials between the yard and processing unit using appropriate handling equipment.
Change, weigh, and label bags of finished regrind to meet production and quality standards.
Maintain a clean, safe, and organised work area at all times.
Complete production records and paperwork accurately.
Work collaboratively with the team to ensure smooth operation and achieve production targets.
Take ownership of the process and, once trained, run the line independently.
Adhere to all health and safety procedures and company policies.
Operate a forklift to move materials around the site (training can be provided for candidates without a experience).
Please note: This is a very hands on/physical role. You must be 18+ to apply due to insurance purposes.
Training:Over 24 months, you’ll devote a minimum of 6 hours of your working week on ‘off the job’ training. This can include theory training (for example, virtual lessons & online learning), alongside practical training (for example shadowing, mentoring, & time spent writing assignments. Together this will count towards a Level 3 Polymer Processing Technician apprenticeship.
You’ll be trained by an expert tutor from Tiro as well as an experienced mentor at Aylesbury Granulation who together, will make sure you develop the knowledge, skills, and work habits you’ll need to succeed in your career.Training Outcome:When you join Aylesbury Granulation, the possibilities for your success are limitless. As a successful applicant, you have the potential to secure a full-time position within the company at the conclusion of your apprenticeship. The company is seeking an apprentice with the goal of developing a long-term team member following the successful completion of the apprenticeship, as part of their ongoing succession planning.
Through practical training on the job, you will acquire new skills and gain the competence and responsibility required for manufacturing and process operations. This apprenticeship programme serves as a stepping stone towards a rewarding career in polymer processing, with the added opportunity for the apprentice to become a registered Science or Engineering Technician (RSci/Eng Tech).
This apprenticeship offers opportunities for professional growth, enabling you to specialise in areas such as process optimisation, quality control, or equipment maintenance, and to progress into supervisory or leadership roles within the polymer manufacturing environment.Employer Description:Aylesbury Granulation is an independent, family-run plastic recycling company based in Buckinghamshire. Since 2011, they have specialised in processing segregated rigid plastic waste into high-quality regrinds for reuse in manufacturing across the UK.
With a strong focus on sustainability, quality, and reliability, they help businesses turn plastic waste into valuable raw material—reducing landfill use and supporting the circular economy. Their small, dedicated team ensures every batch is handled with care, maintaining strict standards of cleanliness and quality.Working Hours :Workings hours are 9:00am to 4:00pm (Monday to Friday)Skills: Attention to detail,Organisation skills,Problem solving skills,Logical,Initiative....Read more...
Operate recycling machinery, including granulating and shredding, to process a range of rigid plastic materials such as buckets, bins, crates, and manufacturing scrap.
Feed plastic waste safely and efficiently onto conveyors to maintain consistent production flow.
Monitor machinery during operation and perform basic troubleshooting to prevent downtime.
Move materials between the yard and processing unit using appropriate handling equipment.
Change, weigh, and label bags of finished regrind to meet production and quality standards.
Maintain a clean, safe, and organised work area at all times.
Complete production records and paperwork accurately.
Work collaboratively with the team to ensure smooth operation and achieve production targets.
Take ownership of the process and, once trained, run the line independently.
Adhere to all health and safety procedures and company policies.
Operate a forklift to move materials around the site (training can be provided for candidates without experience).
Please note: This is a very hands-on/physical role. You must be 18+ to apply for insurance purposes.
Training:Over 24 months, you’ll devote a minimum of 6 hours of your working week to ‘off-the-job’ training. This can include theory training (for example, virtual lessons & online learning), alongside practical training (for example, shadowing, mentoring, & time spent writing assignments. Together this will count towards a Level 3 Polymer Processing Technician apprenticeship.
You’ll be trained by an expert tutor from Tiro as well as an experienced mentor at Aylesbury Granulation who together, will make sure you develop the knowledge, skills, and work habits you’ll need to succeed in your career.Training Outcome:When you join Aylesbury Granulation, the possibilities for your success are limitless. As a successful applicant, you have the potential to secure a full-time position within the company at the conclusion of your apprenticeship. The company is seeking an apprentice with the goal of developing a long-term team member following the successful completion of the apprenticeship, as part of their ongoing succession planning.
Through practical training on the job, you will acquire new skills and gain the competence and responsibility required for manufacturing and process operations. This apprenticeship programme serves as a stepping stone towards a rewarding career in polymer processing, with the added opportunity for the apprentice to become a registered Science or Engineering Technician (RSci/Eng Tech).
This apprenticeship offers opportunities for professional growth, enabling you to specialise in areas such as process optimisation, quality control, or equipment maintenance, and to progress into supervisory or leadership roles within the polymer manufacturing environment.Employer Description:Aylesbury Granulation is an independent, family-run plastic recycling company based in Buckinghamshire. Since 2011, they have specialised in processing segregated rigid plastic waste into high-quality regrinds for reuse in manufacturing across the UK.
With a strong focus on sustainability, quality, and reliability, they help businesses turn plastic waste into valuable raw material—reducing landfill use and supporting the circular economy. Their small, dedicated team ensures every batch is handled with care, maintaining strict standards of cleanliness and quality.Working Hours :Workings hours are 9:00am to 4:00pm (Monday to Friday).Skills: Attention to detail,Organisation skills,Problem solving skills,Logical,Initiative....Read more...
Building Services Compliance Manager - Client Direct - Amazing building - East London - up to 55k Have you got a strong background in building services compliance in the FM sector? Would you be interested in working client side at an amazing venue in East London? If the answer is yes to the above then please read on.... One of our key clients, a major London landmark, is currently looking to recruit a Building Services Compliance Manager to join its busy facilities and maintenance team. Based at this highly recognisable location in East London, the Compliance Manager will be responsible for the management and delivery of effective and efficient technical and technical support training within the building services department. Reporting into the Head of Building Services, the role will also be responsible for ensuring that all areas are operating safely and compliantly and that all obligatory regulatory and organisational requirements are met. The hours of work are Monday to Friday 9.00 to 17.30 with free on site parking. There is also an excellent benefits package on offer which comes with 25 days holidays. The main duties of the role are as follows:Ensure the Engineering and Building Services team are suitably skilled and trained on all technical elements and requirements relevant to role.Maintain central training records, informing supervisor/Line management when refresher training is required.Carry out assessment of contractor’s competencies, as required and ensure Logbooks are up to date and relevant.Maintain the existing library of departmental risk assessments, proactively support the function to develop additional documentation as per requirement.Ensure that the Building Services team is adhering to all relevant health and safety regulations and codes of practice. Support the Health and Safety team in the completion of investigations relating to occupational safety incidents.Support the delivery of documented departmental procedures and processes.Ensure all training material is reviewed annually and is updated as and when necessary.Conduct regular audits and inspections of departmental functions, identify areas of non-compliance and record them accordingly.Where applicable, provide efficient feedback and/or corrective actions.Report back to management functions on current risk and compliance performance using a Plan, Do, Check, Act approachFacilitate and accommodate both internal and external auditsCover Shift Technician role in times of sickness or holidays if requiredTo undertake any relevant training, as requiredAny other duties as reasonably requested by the Building Services Management TeamApplicants for the role must be able to meet the following criteria:Ideally apprentice trained engineer who has recognised technical qualifications in Electrical and/or Mechanical Engineering.Strong background in technical compliance within a building services/facilities environment.Experience leading departmental technical training and relevant experience in a technical training role in a regulated environment.Delivering presentations/information to a diverse range of stakeholders using a variety of methods.Utilising administration and record keeping systems.Knowledge/experience of Safety Management SystemsExcellent communication skills and ability to suggest appropriate learning solutionsAccomplished teaching and facilitation skillsPro active, organised and methodicalAbility to work on own initiativeHealth and Safety Qualification such as IOSH Managing Safely or equivalent....Read more...
An exciting opportunity has arisen for a Production Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Production Welder, you will be working on small component welding to support production and maintain the high-quality standards.
This full-time permanent role offers a salary of £13.20 per hour and benefits.
You Will Be Responsible For:
* Welding small components using MIG and/or TIG equipment according to defined procedures.
* Preparing and setting up tools and equipment for welding tasks.
* Ensuring parts are manufactured to specification and adhering to quality standards.
* Reporting any non-conformance and ensuring corrective actions are applied.
* Supporting production schedules and work orders, meeting output targets.
* Maintaining a clean and organised work area.
* Supporting continuous improvement initiatives by suggesting quality or productivity enhancements.
What We Are Looking For:
* Previously worked as a Production Welder, Sub Assembly Welder, MIG Welder, TIG Welder, Fabricator Welder, Welder Fabricator, Welding Technician or in a similar role.
* Practical experience with MIG and/or TIG welding at assembly level.
* Ideally have experience in automotive sector.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Junior Service Engineer
Sheffield
£30,000 - £35,000 + Door to Door Pay + Training + Overtime + Commission Opportunities + Good Staff Retention + ‘Immediate Start’
Join a company as a Junior Service Engineer and develop into an expert in a niche field at a family run company. You will have the opportunity to progress your career long term to higher roles and work on high level equipment, benefit from full technical training to develop your skillset and become the best at what you do.
This manufacturing and design company works on bespoke equipment and has been around for over 85 years. As a result of steady growth, they are looking for a Junior Service Engineer to join the team and help contribute to their consistent workload. Join now and secure the opportunity to earn well through overtime and progress your career with a longstanding company, all whilst accompanied by a competitive package!
Your Role As A Junior Service Engineer:
* Service, repairs & PPM’s of Blast and Finishing equipment
* Field service role covering Sheffield and surrounding areas
* Mon-Fri role with stay away
The Successful Junior Service Engineer Will Have:
* Mechanical engineering background
* Full driving licence
* Happy to Travel
Please apply or contact Toby on 07458 163036 for immediate consideration.
Keywords: field service engineer, junior engineer, trainee engineer, field engineer, service engineer, service technician, navy, army, mechanic, mechanical engineer, sheffield, yorkshire, manchester, nottingham, leeds....Read more...
The service department is vital to the success of our business. From right first-time fixes, to delivering excellent customer service, our Service Technicians/Mechanics play a pivotal role in delighting our customers and encouraging their continued loyalty.
Every day is different within the Service department. As a Service Technician/Mechanic apprentice, some of your duties will include:
Use of diagnostic equipment to identify vehicle faults
Testing of parts and systems to ensure correct working
Following checklists to ensure all critical parts of vehicles are examined
Carrying out bumper to bumper overview, service, and inspection
Maintenance of electronic systems including on- board entertainment systems
Completion of legible and accurate paperwork for the customers and centres records
Maintenance of a clean and tidy work environment
You will have the opportunity to work with a wide range of products including traditional, hybrid and electronic engines. From heritage vehicles to leading edge modern technology, our range will provide you with a varied technical training experience to build your skills as a Service Technician/Mechanic.
Desired skills & Experience:
Our ideal candidate will be able to demonstrate skills in logic and problem solving. You should be someone who pays attention to detail and is committed to completing this apprenticeship programme. We are looking for people who have some experience in the motor industry either with formal training at Level 1 or having worked at or within a similar organisation. You should be passionate about our industry and our brand. Some of the personal skills that you should think about showing us in your application are:
Enthusiasm and willingness to learn
Teamwork
Strong communication
Customer service
Interest in vehicle engineering
We are looking for an enthusiastic, hardworking individual to join our team and embark on a long-term career, with excellent earning and progression opportunities once you complete your apprenticeship.
A Level 1 in Light Vehicle Maintenance and Repair is desirable. Training:Autocare Technician Level 2.Training Outcome:Once your apprenticeship is complete, you will continue your learning journey, and you will have the opportunity drive your career forward. Some of our apprentices have gone on to become team leaders and managers within the retail network. Employer Description:The latest information on the Apprentice National Minimum Wage can be found at https://www.gov.uk/become-apprentice/pay-and-conditions
As part of our commitment to Diversity, Equality and Inclusion, all applications are automatically anonymised by our recruitment system. This is with the aim of realising our ambition to have a workforce that is reflective of the community we serve and eliminating unconscious bias, allowing employees to be appointed based on their talent, skills, and experiences regardless of ethnicity, gender, sexual orientation, or any other protected characteristic.
English and Maths guidance from the government changed on 11/02/25. This employer wishes to support upskilling in both English and Maths by exception and as such the entry grade criteria as advertised still applies.
The closing date for this vacancy is 31st October 2025 and interviews and work trials are expected to be held on 7th November. We reserve the right to close the advert early if we receive a sufficient number of applications. We therefore advise candidates to submit their applications as early as possible to avoid disappointment.
Please do not contact the retailer directly. Inspiro Learning carry out the full recruitment service for this employer. Due to the high number of applications, we cannot provide a timescale on when you are likely to receive a response. As most of our roles are recruited for on an ongoing basis, we will contact you if you are successful at progressing to the next step. It is not possible for us to contact every applicant individually. If you have not heard back on a specific vacancy but find another opportunity that is of interest to you, we welcome an additional application.Working Hours :Monday - Friday, 08:30 - 17:30.
Possibility of Saturday workings and/or shifts.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
The Service department is vital to the success of our business. From right first-time fixes, to delivering excellent customer service, our Service Technicians/Mechanics play a pivotal role in delighting our customers and encouraging their continued loyalty.
Every day is different within the Service department. As a Service Technician/Mechanic apprentice, some of your duties will include:
Use of diagnostic equipment to identify vehicle faults
Testing of parts and systems to ensure correct working
Following checklists to ensure all critical parts of vehicles are examined
Carrying out bumper to bumper overview, service, and inspection
Maintenance of electronic systems including on- board entertainment systems
Undertaking repair and maintenance of vehicle parts including clutches, gearboxes, tyres, brakes, and suspension
Completion of legible and accurate paperwork for the customers and centres records
Maintenance of a clean and tidy work environment
You will have the opportunity to work with a wide range of products including traditional, hybrid and electronic engines. From heritage vehicles to leading edge modern technology, our range will provide you with a varied technical training experience to build your skills as a Service Technician/Mechanic.
Our ideal candidate will be able to demonstrate skills in logic and problem solving. You should be someone who pays attention to detail and is committed to completing this three-year training programme. We are looking for people who are passionate about our industry and our brand. Some of the personal skills that you should think about showing us in your application are:
Enthusiasm and willingness to learn
Teamwork
Strong communication
Customer service
Interest in vehicle engineering
We are looking for an enthusiastic, hardworking individual to join our team and embark on a long-term career, with excellent earning and progression opportunities once you complete your apprenticeship. Training:Training will be delivered using a combination of virtual classroom remote learning and face-to-face block release weeks at our state-of-the-art training centre.
Our expert trainers will guide you through the training programme using a combination of e-learning, classroom learning and practical application.
In the workplace, your personal, dedicated mentor will support your continued learning as you apply the skills and knowledge you have gained through the remote sessions and at the Volkswagen Group National Learning Centre.
This is a fully rounded training experience where you will build life skills that last and gain both apprenticeship qualifications and brand certifications. As an apprentice, you will also have the opportunity to attend Outward Bound, a personal development week which supports with developing resilience, confidence, and teamwork skills. On successful completion of the three-year programme, you will receive the following:
Level 3 Apprenticeship Standard in Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Certificate in Automotive Refrigerant Handling
Brand specific certifications
Training Outcome:Volkswagen Group (VWG) is one of the UK’s largest car retailers encompassing premium brands such as Audi, Bentley, SEAT, ŠKODA, Volkswagen, TPS, Volkswagen Group Paint and Body and Volkswagen Commercial Vehicles. This network of retailers spans the UK, providing a wide range of career opportunities.
Once your apprenticeship is complete, you will continue your learning journey, and you will have the opportunity drive your career forward. Some of our apprentices have gone on to become team leaders and managers within the retail network or even joined our team at Head Office in Milton Keynes. Employer Description:ŠKODA is driven by something different. What are you driven by? We are looking for ambitious, dynamic, and enthusiastic people to join our apprenticeship programme. If you are customer focused, forward thinking and want to learn, then we can give you the life and technical skills you need to be part of our team.Working Hours :Monday - Friday. 08:30 - 17:30.
Possibility of Saturday workings and/or shifts.
Working week will be confirmed on application.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
An exciting opportunity has arisen for a Sub Assembly Welder / MIG Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Sub Assembly Welder / MIG Welder, you will be performing MIG and TIG welding to produce components and assemblies to specification while supporting production targets and quality standards.
This full-time permanent role offers a salary of £13.20 per hour and benefits.
You Will Be Responsible For:
* Working safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
* Using MIG and/or TIG welding equipment to manufacture parts and assemblies as required.
* Preparing and setting up tools and equipment to support welding operations.
* Ensuring components are prepared correctly for welding.
* Monitoring quality, reporting non-conformance, and following corrective actions as needed.
* Supporting production processes and work order tracking via data capture and ERP systems.
* Suggesting improvements to quality and productivity as part of continuous improvement initiatives.
What We Are Looking For:
* Previously worked as a Sub Assembly Welder, MIG Welder, TIG Welder, Fabricator Welder, Production Welder, Welder Fabricator, Welding Technician or in a similar role.
* Practical experience with MIG welding, ideally with both MIG and TIG.
* Ability to work diligently with minimal supervision.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Final Assembly Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Final Assembly Welder, you will perform MIG and TIG welding to assemble components and complete final products according to specifications, ensuring production targets are met and quality standards are maintained.
This full-time permanent role offers a salary of £16.12 per hour and benefits.
You Will Be Responsible For:
* Operate MIG and/or TIG welding equipment to assemble final products and components to specification.
* Work safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
* Prepare and set up tools, jigs, and equipment to support welding and assembly operations.
* Ensure components and assemblies are correctly prepared and aligned for welding.
* Monitor quality, report any non-conformances, and follow corrective actions as required.
* Support production processes and work order tracking using data capture and ERP systems.
What We Are Looking For:
* Previously worked as a Final Assembly Welder, MIG Welder, TIG Welder, Production Welder, Fabrication Welder, Welding Technician, Welder or in a similar role.
* Practical experience with MIG and/or TIG welding.
* Ability to work diligently with minimal supervision.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Sub Assembly Welder / MIG Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Sub Assembly Welder / MIG Welder, you will be performing MIG and TIG welding to produce components and assemblies to specification while supporting production targets and quality standards.
This full-time permanent role offers a salary of £13.20 per hour and benefits.
You Will Be Responsible For:
* Working safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
* Using MIG and/or TIG welding equipment to manufacture parts and assemblies as required.
* Preparing and setting up tools and equipment to support welding operations.
* Ensuring components are prepared correctly for welding.
* Monitoring quality, reporting non-conformance, and following corrective actions as needed.
* Supporting production processes and work order tracking via data capture and ERP systems.
* Suggesting improvements to quality and productivity as part of continuous improvement initiatives.
What We Are Looking For:
* Previously worked as a Sub Assembly Welder, MIG Welder, Fabricator Welder, Production Welder, Welder Fabricator, Welding Technician, TIG Welder or in a similar role.
* Practical experience with MIG welding, ideally with both MIG and TIG.
* Ability to work diligently with minimal supervision.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Final Assembly Welder / TIG Welder to join a reputable manufacturing company specialising in the design and production of automotive components and accessories, particularly for original equipment (OE) applications.
As a Final Assembly Welder / TIG Welder, you will perform MIG and TIG welding to assemble components and complete final products according to specifications, ensuring production targets are met and quality standards are maintained.
This full-time permanent role offers a salary of £16.12 per hour and benefits.
You Will Be Responsible For:
* Operate MIG and/or TIG welding equipment to assemble final products and components to specification.
* Work safely and in compliance with health, safety, and environmental regulations, reporting any near misses.
* Prepare and set up tools, jigs, and equipment to support welding and assembly operations.
* Ensure components and assemblies are correctly prepared and aligned for welding.
* Monitor quality, report any non-conformances, and follow corrective actions as required.
* Support production processes and work order tracking using data capture and ERP systems.
What We Are Looking For:
* Previously worked as a Final Assembly Welder, TIG Welder, Production Welder, MIG Welder, Fabrication Welder, Welding Technician, Welder or in a similar role.
* Practical experience with MIG and/or TIG welding.
* Ability to work diligently with minimal supervision.
* Understanding of production schedules and process adherence.
* Eligibility to work in the United Kingdom.
What's on Offer:
* Competitive Salary.
* Company pension scheme.
* Life insurance and death in service benefit.
* Health and wellbeing programme.
* Generous holiday allowance including bank holidays.
* On-site parking.
This is a fantastic opportunity to join a reputable engineering organisation where your welding skills will be valued.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Field Service Engineer
London
£35,000 + £45,000 (OTE £65,000) + Overtime + Progression + Training + Medical Sector + Van + Door to Door + Healthcare + Pension
Earn up to £65,000 through overtime at a premium rate in your first year in a specialist industry as a field service engineer. You will have the opportunity to progress your career long term to higher roles and gain responsibility and benefit from full technical training to develop your skillset and become the best at what you do.
This company operates in the medical gas sector and is rapidly growing and expanding. In result, they are looking for an additional field service engineer to come and join the team and help contribute to their consistent workload. Join now and secure the opportunity to earn well through overtime and progress your career with an industry leader, all whilst accompanied by a competitive package!
Your Role As A Field Service Engineer:
* Service, repairs & PPM’s of medical gas equipment
* Field service role covering London and surrounding areas
* Weekday role with occasional nights on a rota basis
The Successful Field Service Engineer Will Have:
* Mechanical or electrical engineering background (mechanics, ex navy - ANY considered.)
* Full driving licence
* Happy to Travel
Please apply or contact Toby on 07458 163036 for immediate consideration.
Keywords: field service engineer, field engineer, medical engineer, service engineer, service technician, dental engineer, medical gas engineer, navy, army, mechanic, mechanical engineer, laboratory engineer, London, South East, Kent, Surrey, Hertfordshire, Bedfordshire, Reading....Read more...
Join an expanding team in Gloucestershire as an Assembly Fitter to keep up with their growing business. This is a fantastic opportunity to build a career in a thriving company.As an Assembly Fitter, you'll be part of a dynamic team working with cutting-edge tools and industry leaders in aircraft production. You'll have the chance to work on prestigious aircraft models like the A320 and A330 family, using advanced equipment such as zero gravity lifting and snap-on computerised toolboxes.You'll work on a regularly rotating shift pattern, covering dayshifts and nightshifts (which include a premium shift payment of 38.5% of your salary). Occasionally, there'll be options for working bridging shifts and weekend shifts too.Roles: Assembly Technician, Assembler, Assembly Operative, Production Operator, FitterWhat's in it for you?Competitive starting salary from £35,000, with the potential to increase after completing your training within 18-24 months.Exciting career development opportunities within their growing team.Flexible benefits package through our 'On Board Benefits' Programme, including options like cycle to work schemes, technology savings, retail discounts, healthcare access, sports clubs, and more.What do I need?You'll already have Fitting experience from a previous role, ideally in an Aerospace or Automotive environment. We're looking for someone with:A completed Apprenticeship in Mechanical Engineering.The ability to follow technical drawings, specs, procedures, and test instructions.A desire to learn and understand the basic principles of production flow lines, and takt times.Knowledge of COSH and flow line methodologies is ideal, but not essential for you to applyAnything else I need to know?As a valued member of our team, you'll be entitled to a range of company benefits, including:25 days holiday + UK Bank Holidays, plus the option to buy/sell annual leave.A generous pension scheme, up to 8% employer match.Our Shares and profit share bonus schemeAnd much more!Work Permissions:You must have the right to work in the United Kingdom. Visa sponsorship is not available at this time.....Read more...
The Service department is vital to the success of our business. From right first-time fixes, to delivering excellent customer service, our Service Technicians/Mechanics play a pivotal role in delighting our customers and encouraging their continued loyalty.
Every day is different within the Service department. As a Service Technician/Mechanic apprentice, some of your duties will include:
Use of diagnostic equipment to identify vehicle faults
Testing of parts and systems to ensure correct working
Following checklists to ensure all critical parts of vehicles are examined
Carrying out bumper to bumper overview, service, and inspection
Maintenance of electronic systems including on- board entertainment systems
Undertaking repair and maintenance of vehicle parts including clutches, gearboxes, tyres, brakes, and suspension
Completion of legible and accurate paperwork for the customers and centres records
Maintenance of a clean and tidy work environment
You will have the opportunity to work with a wide range of products including traditional, hybrid and electronic engines. From heritage vehicles to leading edge modern technology, our range will provide you with a varied technical training experience to build your skills as a Service Technician/Mechanic.
Our ideal candidate will be able to demonstrate skills in logic and problem solving. You should be someone who pays attention to detail and is committed to completing this three year training programme. We are looking for people who are passionate about our industry and our brand. Some of the personal skills that you should think about showing us in your application are:
Enthusiasm and willingness to learn
Teamwork
Strong communication
Customer Service
Interest in vehicle engineering
We are looking for an enthusiastic, hardworking individual to join our team and embark on a long term career, with excellent earning and progression opportunities once you complete your apprenticeship. Training:Training will be delivered using a combination of virtual classroom remote learning and face-to-face block release weeks at our state-of-the-art training centre.
Our expert trainers will guide you through the training programme using a combination of e-learning, classroom learning and practical application.
In the workplace, your personal, dedicated mentor will support your continued learning as you apply the skills and knowledge you have gained through the remote sessions and at the Volkswagen Group National Learning Centre.
This is a fully rounded training experience where you will build life skills that last and gain both apprenticeship qualifications and brand certifications. As an apprentice, you will also have the opportunity to attend Outward Bound, a personal development week which supports with developing resilience, confidence, and teamwork skills.
On successful completion of the three year programme, you will receive the following:
Level 3 Apprenticeship Standard in Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Certificate in Automotive Refrigerant Handling
Brand specific certifications
Training Outcome:Volkswagen Group (VWG) is one of the UK’s largest car retailers encompassing premium brands such as Audi, Bentley, SEAT, ŠKODA, Volkswagen, TPS, Volkswagen Group Paint and Body and Volkswagen Commercial Vehicles. This network of retailers spans the UK, providing a wide range of career opportunities.
Once your apprenticeship is complete, you will continue your learning journey and you will have the opportunity drive your career forward. Some of our apprentices have gone on to become team leaders and managers within the retail network or even joined our team at Head Office in Milton Keynes. Employer Description:Throughout Volkswagen we have a rigorous commitment to quality and excellence. Our products are highly acclaimed, our processes for distribution and support services are world class and we have some of the most technologically advanced resources in any industry.
The Volkswagen Apprenticeship Programme is designed to train and develop apprentices to keep pace with advancing technology and high levels of customer service. This is an exciting and challenging opportunity to receive formal qualifications through extensive product training whilst in full-time employment at one of our retailers.Working Hours :Monday - Friday, 08.30 - 17.30.
Possibility of Saturday workings and / or shifts.
Working week will be confirmed on application.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
AOI Technician
Bedford
£35k
Are you passionate about precision, technology, and quality? We’re looking for a skilled AOI Technician to help us deliver top-tier electronic assemblies through advanced inspection processes.
You’ll take the lead in operating and optimising CyberOptics 3D AOI systems, ensuring every product meets the highest quality standards. Working closely with the Process Engineering team, you’ll help refine AOI programming and inspection workflows, driving continuous improvement across production.
This is a fantastic opportunity for someone who enjoys combining hands-on technical work with problem-solving and process optimisation in a fast-paced manufacturing environment.
What You’ll Do
Develop and optimise 3D AOI inspection routines for solder joints and component placement.
Carry out First Article Inspections (FAI) and validate assemblies against build standards.
Train and support operators to ensure consistent inspection quality.
Analyse inspection results and collaborate with Engineering to improve processes.
Keep AOI programs up to date with design changes, NPIs, and software updates.
Support ongoing quality and yield improvement initiatives.
What You’ll Bring
Experience with AOI systems (CyberOptics, Koh Young, Mirtec, Omron, or similar).
Knowledge of SMT and PCB assembly processes.
Strong attention to detail and commitment to quality.
Ability to read assembly drawings and interpret data files.
Confident using inspection software and computer systems.
A proactive, team-focused approach and excellent communication skills.
Our Values
We succeed by working together with care, integrity, hard work, positivity, and synergy — supporting each other and striving for excellence in everything we do.....Read more...
Throughout your apprenticeship, you will be supported to:
Assist in carrying out routine maintenance and planned servicing in line with customer contracts and relevant standards
Learn how to diagnose and repair faults across a variety of fire, emergency, and security systems
Support senior engineers on-site and gradually take on more responsibility as your skills develop
Ensure on-site documentation and logbooks are accurately completed following any work undertaken
Gain an understanding of compliance requirements (BS 5839, BS 5266, etc.) and how to report any non-conformances
Learn to use digital systems (PDA) to record job details, parts used, and customer updates
Maintain a professional approach when representing the company on customer sites
During your apprenticeship, you will develop skills and knowledge in:
Fire detection and alarm systems · Intruder alarm systems · CCTV systems
Access control and door entry systems
Health, safety, and environmental practices
Electrical and electronic principles
Fault diagnosis and problem solving
You will be supported by a dedicated mentor and engineering team who will help guide your progress and ensure you gain the full range of competencies required.Training:
As part of the Fire, Emergency and Security Systems Technician Level 3 Apprenticeship, you will receive both on-the-job training and off-the-job learning delivered by Access Training
Training Outcome:
This apprenticeship offers the opportunity of long term employment for the right candidate
Employer Description:We know that keeping your business and the people who matter to it safe and secure can cause great concern and therefore that your fire and security systems are of critical importance to your business.
We also know that having the wrong system or one that is non-compliant or poorly or inefficiently maintained will cost you time and money that is best spent on other things.
That’s why we promise that every person you meet from ABCA will care as much about keeping your people safe and your business running effectively as you do. Our sole objective is to keep you risk and trouble-free, so you can focus your time on things to help you to grow and improve your business.Working Hours :Monday to Friday 8.30am till 5pm with 30 minutes lunchSkills: Communication skills,Attention to detail,Organisation skills,Team working,Initiative....Read more...
Install, test, and maintain fibre optic and copper telecoms networks.
Connect homes and businesses to broadband, phone, or TV services.
Splice and join fibre cables using specialist equipment.
Identify, locate, and repair faults or damaged network components.
Carry out signal testing to ensure quality and performance.
Record completed work and test results using digital devices or reporting software.
Work safely at height, underground, or near roads, following health and safety procedures.
Use hand tools and power tools correctly and safely.
Attend on-site training and classroom sessions to build technical knowledge.
Follow instructions from experienced engineers and supervisors.
Communicate clearly and professionally with customers and colleagues.
Explain installations or repairs to customers in a simple, helpful way.
Maintain tools, vehicles, and equipment in good working order.
Keep accurate records for your apprenticeship logbook or portfolio.
Support team members and contribute to a positive work environment.
Training:Training will be a combination of classroom and on-site training including theory and practical work. Training Outcome:
Qualified Telecoms Field Operative / Technician
Network Operations Manager
Telecoms Project Manager
Infrastructure or Network Design Engineer
Telecommunications Consultant
Specialist Roles (Technical Progression)
Supervisory and Leadership Roles
Employer Description:As the partner of choice for our clients, Kelly Group is renowned for building telecommunication and utility networks in collaboration with several leading service providers - connecting people globally.
From initial design to the maintenance of networks, we deliver safe and innovative ‘one-stop solutions’ across several industries including telecommunications, rail, civils, utilities, fleet and traffic management.
With an outstanding safety record, over 40 years’ experience, a national presence and customer service at the heart of our business, we are committed to meeting the needs of our clients, delighting their customers and supporting the communities we work in.
By continually investing in our people, fleet and management systems, we provide excellent service ensuring our clients and their customers have a positive experience and receive a quality product at the end of each of our engineering services - each and every time.Working Hours :Monday to Friday.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Organise intake & storage of all raw materials and monitor stock levels to ensure effective containment, material quality and accuracy
Ensure the production plan is continuously tracked to comply with production schedules
Supervise the formulation & mixing of products to achieve accurate and uniform product consistency
Monitor & control the operation of the herbicide intake system to control safety, consistency and quality
Operate the process plant to safely & efficiently produce quality granular products
Monitor and adjust process parameters in order to sustain reliable plant operation
Inspect, maintain & clean all plant equipment to keep up safety, quality and operational standards
Promote and sustain a high level of housekeeping to create a safe and efficient working area
Generate reports on production, material usage and equipment operation to effectively transfer information through the business
Continually assess plant and system operations to identify potential performance improvements
Carry out plant changeovers to maintain availability and safeguard start-up consistency
Regularly test products for size distribution, moisture content and general quality in order to establish efficient process settings and meet customer requirements
Control and record waste usage to reduce operating costs and impact to the environment
Carry out statutory site inspections and audits in-line with safety, environmental and quality system procedures
Assess hazards & risks for all work carried out (including contractor’s work) and issue Permit-to-Work documents accordingly so as to safely control all activities in the work area
Act as site responsible person out of hours to continue effective operation of the site, make sure the site is secure and deal with any incidents
Issue equipment spares, PPE and supplies to support efficient use and control of company resources
Contribute to project development and implementation to produce optimum business improvements
Training:
Process Industry Manufacturing Technician Level 3 (A level) Apprenticeship Standard
Training will be delivered as a blended mixture of online and in-person learning
Training Outcome:
This will lead to Process Operator role. There is scope for progression. An operator has recently moved into a day role providing operational and engineering support
Salary as an operator is £37000 (£16.96/hr)
Employer Description:As the specialists in skills for science and technology, our purpose is to make sure your business; your people and our industry are future ready.
We are a not-for-profit charitable organisation with a family of commercially focused companies committed to supporting the skills, needs and ambitions across the UK science and technology sector.Working Hours :Monday - Friday, 8.00am - 4.30pm. 30 minute unpaid lunch break.Skills: Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative....Read more...
Multi-Skilled Conveyor Technician – Hatfield – Permanent – Apply Today! Salary: £48,405 per annum (Overtime available) Shift Pattern: 4 on / 4 off (12-hour shifts – Days & Nights)4 on 4 off 12hr Days to Nights Location: Hatfield Type: Permanent About the Role Centric Talent are recruiting Multi-Skilled Conveyor Technicians on behalf of our client – one of the fastest-growing delivery companies in the UK. This role is based at their prestigious Hatfield site. We’re looking for motivated and experienced technicians who thrive in fast-paced environments, enjoy problem-solving, and take pride in delivering high-quality work. If you have strong mechanical and/or electrical skills and experience working with conveyor systems, this could be the perfect opportunity for you. Key ResponsibilitiesInstall, align, and test new conveyor systems in line with technical specifications, manuals, and schematics.Carry out routine inspections, lubrication, adjustments, and replacements of components such as belts, chains, and motors.Diagnose and repair mechanical and electrical faults, including motors, gears, switches, pneumatics, and hydraulics.Respond promptly to breakdowns and emergency calls to minimize downtime.Adhere to all safety guidelines and company procedures to maintain a safe working environment.Maintain accurate documentation of maintenance activities, safety checks, and repairs.Read and interpret electrical and mechanical drawings with confidence.Collaborate with other technicians and departments to resolve complex issues and enhance system performance.Monitor conveyor operations to identify potential problems and implement improvements.Ensure adequate spare parts and materials are available for scheduled and unscheduled maintenance.Working HoursShift Pattern: 4 on / 4 off 12 hours shifts days to nights Hours:Days: 06:00 – 18:00 - Nights: 18:00 – 06:00Salary: £48,405 per year (Overtime available)Skills & ExperienceStrong mechanical and electrical knowledge – or a bias in one area with a willingness to develop the other.Proven ability to diagnose and resolve issues with conveyor and automation systems.Minimum 3–5 years’ experience in an automated sortation or logistics environment.Sound understanding of conveyor components, operations, and maintenance procedures.Solid awareness of safety regulations and compliance standards.Effective communication and teamwork skills, with attention to detail in documentation.Physically capable of performing hands-on maintenance work in varied positions.Qualifications: NVQ Level 3, ONC, HNC, or equivalent in an Engineering discipline (or relevant industry experience).Interested? If you’re ready to take the next step in your career with a leading logistics company, apply today and join a business that values your expertise and offers excellent career progression opportunities.....Read more...
You will be key to providing manufacturing and assembly capabilities to the defence and security of the United Kingdom. You will experience hands-on production and process operations in a highly regulated and safety conscious working environment.
Here are just some of the exciting opportunities you could get involved with during your placements:• You will spend time in each of our operational areas to understand common tasks, following processes, and delivering work to specific requirements.• You may have the opportunity to carry out practical laboratory analysis, supporting administrative activities, and monitoring physical and environmental health. • You will learn techniques for undertaking experiments within our explosives operational area and the related safety measures required.• You will gain an understanding of organising and planning daily work processes, weekly plans, and safe systems of work, all of which ensure that any works carried out across the site follow the correct process and safety procedures.• You may even carry out science related work such as pulsed power trials, where you'll explore the science and technology of accumulating energy over time and releasing it instantly.
Your role can be physically demanding, so you will be required to pass a medical test for general fitness and suitability to work with our unique materials. This includes having a BMI of under 35, a legal requirement for wearing respiratory protection (which you may be required to wear dependant on your role).Training:Working towards a Level 3 Process Industry Manufacturing Technician apprenticeship standardTraining Outcome:You are likely to outturn into one of our operational Business Units, but could also apply for roles within some of our other functional areas which could include logistics, science and engineeringEmployer Description:We’re a team of remarkable people, united by one extraordinary mission: keeping the UK safe and secure. The UK’s independent nuclear deterrent has existed for 75 years to deter the most extreme threats to our national security and way of life, helping to guarantee our safety, and that of our NATO allies.
Our work is critical. We’re delivering Astraea, the next warhead for the UK’s nuclear deterrent and pushing the boundaries of nuclear science and technology. But that’s just part of the story.
We support the UK government in a range of vital areas – from counter-terrorism to global nuclear test monitoring to building a world-class community of experts in nuclear science. This is work that protects lives and strengthens national security.
At AWE, you’ll find more than just a job. You’ll find purpose, growth, and a community like no other. Whether you're just starting out or looking to take your career to the next level, this is your chance to learn from the best, develop your skills, and be part of something truly unique.
Be extraordinary at AWE.Working Hours :9 day fortnight.
33 hrs on the short week, 8hrs 15 mins per day.
41 hrs on the long week, 8hrs 15 mins per day Monday to Thursday and Fridays 8hrs.
Please note hours may alter due to College training times.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Patience....Read more...
This apprenticeship provides an excellent opportunity to gain hands-on experience in the fire and security industry while learning from experienced engineers.
You will be trained to work with a range of systems including door entry, access control, intruder alarms, CCTV, warden call, and fire detection systems, primarily within social housing and commercial environments.
You will learn how to carry out both preventative and reactive maintenance, fault finding, and installations — developing the knowledge and skills required to become a fully qualified, multi-skilled Fire and Security Engineer.
Duties and responsibilities
Throughout your apprenticeship, you will be supported to:
Assist in carrying out routine maintenance and planned servicing in line with customer contracts and relevant standards.
Learn how to diagnose and repair faults across a variety of fire, emergency, and security systems.
Support senior engineers on-site and gradually take on more responsibility as your skills develop.
Ensure on-site documentation and logbooks are accurately completed following any work undertaken.
Gain an understanding of compliance requirements (BS 5839, BS 5266, etc.) and how to report any non-conformances.
Learn to use digital systems (PDA) to record job details, parts used, and customer updates.
Maintain a professional approach when representing the company on customer sites.
Training:As part of the Fire, Emergency and Security Systems Technician Level 3 Apprenticeship, you will receive both on-the-job training and off-the-job learning delivered by an approved training provider.
During your apprenticeship, you will develop skills and knowledge in:
Fire detection and alarm systems
Intruder alarm systems
CCTV systems
Access control and door entry systems
Health, safety, and environmental practices
Electrical and electronic principles
Fault diagnosis and problem solving
You will be supported by a dedicated mentor and engineering team who will help guide your progress and ensure you gain the full range of competencies required.Training Outcome:On successful completion of the FESS apprenticeship, we aim to offer a full-time position as a qualified engineer within our company.Employer Description:At the ABCA Group — comprising ABCA Systems Ltd, Maintec Ltd, AGS-Tech Ltd, HBS Fabrications North West Ltd, Citrus Group Ltd, and RAAM Construction — we are committed to being the very best in everything we do. Whether it’s serving our customers or supporting our colleagues, we believe that strong, collaborative relationships are key to our success.
We work as one team, united by shared goals, mutual respect, and a culture of support.
By investing in our people, we drive growth not only for the business but for every individual who is part of it. When you join the ABCA Group, you’ll gain access to new opportunities, take ownership of meaningful initiatives, develop your skills at pace, and become a valued member of the wider ABCA family.
Together, we build better futures — for our people, our clients, and our communitiesWorking Hours :8.30am – 5.30pm Monday to FridaySkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Reliable,Enthusiastic & eager to learn....Read more...
To be responsible for keeping all company equipment (i.e. tools etc) clean, tidy and easily accessible at all times
To be responsible for keeping all stock tidy and easily accessible at all times
To stock check all consumables and tools periodically as requested by a manager
To note and report any worn or potentially unsafe equipment in the log provided
To use the provided protective equipment to customer’s premises where appropriate i.e. dust sheets etc.
Observe all aspects of health and safety and implement where necessary. I.e. use of PPE (personal protection equipment) as provided. Safety boots and work wear should be worn at all times and goggles, ear defenders, face mask and gloves where appropriate
To bring to the immediate attention you your manager any worn/unsafe or mislaid items of PPE for replacement
To observe and assist your manager with your continuous “on the job” training
To perform tasks set by your manager and report back to verify that they have been completed to the company’s required standard
To attend college for additional training as appropriate and to apply that training in the workplace as and when necessary
Discuss with your manager any sections of the course that may be unclear
Maintain a professional and tidy manner at all times
Training:
6 of your contracted working hours per week will be spent on training
Training will be covered by day release, as well as being in the workplace
Common forms of training include completing written assignments, meetings with your assessor, being mentored and shadowing other members of staff
Throughout your apprenticeship you will be required to keep an off-the-job training log for any training that you complete
You will complete the Level 3 Plumbing & Heating Technician apprenticeship for which you will receive either a grade Pass or Distinction
In addition if you don't have maths and English qualifications at grade C/4/Level 2 or equivalent you will be required to undertake Functional Skills alongside the apprenticeship, at Level 2 if you are 16-18 or if required by your employer if you are 19+.
Once per week, term time only you will be required to attend East Sussex College's, Eastbourne campus, for day-release
In the college holidays you will go to the employer's instead unless you have booked Annual Leave
Training Outcome:
Potential permanent full-time employment on successful completion of the apprenticeship
Employer Description:A local family limited company, MPH have been operating for some 25 years covering the local area. They provide plumbing and gas engineering for their large and loyal customer base. Also a Worcester Bosh Approved Installer, accredited for some 10 years plus.Working Hours :Company’s normal hours of work are from 8.00am until 5.30pm on Monday to Friday with half an hour break for lunch. Any additional hours worked would be agreed by prior arrangement. The minimum will be 30 hours per week.Skills: To be punctual,Smartly dressed at all times,An ability to be polite,Motivated and conscientious....Read more...
