The Level 3 Food and Drink Engineering Maintenance apprenticeship programme lasts four years, and combines block release at Kirklees College (Huddersfield), with on the job work experience within the engineering department at Grupo Bim bo UK Ltd (New York Bakery) in Swinton, Mexborough. Grupo Bim bo is the largest Bakery product manufacturer in the world.
If successful at the end of the program you will have the following knowledge, skills and understanding to be a Food and Drink Maintenance Engineer:
Food processing/manufacturing and product knowledge (to meet company requirements e.g., dairy/confectionary/meat processing)
Legislation and regulations in the food and drink industry, including understanding of food safety, health and safety, hazard analysis critical control Point (HACCP), Threat Assessment Critical Control Point (TACCP) and Vulnerability Assessment Critical Control Point (VACCP)
Basic principles of sustainability and environmental legislationThe impact of customer requirements and demands on the food chain
The key principles of cleaning and hygiene processes cover both Cleaning in Place (CIP) and cleaning out of place systems
The key principles of quality management systems and processes
The key principles of Continuous Improvement (CI) ManagementMaterials science, including the key features of raw materials, their own uses in foods production and types of equipment used to process them
Types of best practice maintenance approaches and techniques in the food and drink industry
The principles of fault finding
The operation of mechanical equipment in the food and drink industry
How to produce replacement components
The function of fluid power systems
The operation of heat exchange equipment
The principles of cutting and welding in the food and drink industry
Principles of electrical systems, including their uses, safety, and legislation
Services and utilities knowledge, including the importance and importance of energy management and pollution control in food production
Training:You will study towards a Level 3 Food and Drink Maintenance Engineer Apprenticeship Standard at Kirklees College.
You will achieve a Diploma in Food and Drink Engineering Maintenance.
The college element of this apprenticeship has typically been on “block release”, so there has been the expectation to work and study away from home.
When required, accommodation and travel will be organised, but we need you to have a mature outlook, be mobile, and be “up” for the challenge of managing yourself and your studies when you are away from home at college, and when working at site.
Typical College attendance:
The typical duration of college attendance in previous years is shown below-
Year 1 = 17 weeks, Year 2 = 10 weeks, Year 3 = 16 weeks, Year 4 = 0 weeks
This is a 4-year programme.
The final year will involve completion of a portfolio and preparation for End Point Assessment (EPA). This measures the skills, knowledge and behaviours outlined in the standard and is carried out by ESFA approved organisations independent from the college.Training Outcome:
Following successful completion of the apprenticeship the applicant will be given the opportunity to apply for a shift based, multi skilled engineer
Following further development, possibilities exist in various maintenance supervision and management positions, manufacturing and project management
Employer Description:Ambient food manufacture and largest Bakery product manufacturer in the world.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,Team working,Resilient,Can do attitude,Practical aptitude,Practical approach,Confident self-starter,Ability to work accurately,Safe worker,Accepts responsibility,Proactive,Pride in work,Integrity,Time management....Read more...
An opportunity has arisen for an experienced Pipefitter Welder to join a growing engineering business in the Halifax area. This role involves manufacturing, welding, assembling, and installing piping structures for industries including food processing, pharmaceuticals, and high-temperature fluid systems.
What’s on Offer?
£18 - £20 per hour, based on experience
Hours: 7am to 4pm Monday to Thursday and 3pm Friday
Opportunities for professional growth and development
Work on bespoke, customer-specific engineering solutions
Company Benefits, Including pension scheme, generous holiday allowance and overtime paid at premium rates.
Key Responsibilities:
Manufacture, weld, assemble, and install process engineering pipework
Work both in the workshop and on client sites under the direction of the Project/Contracts Engineer
Ensure projects are completed on time and to the highest engineering standards
Collaborate with the team to resolve technical challenges efficiently
Adhere to safety protocols, risk assessments, and industry hygiene standards
What We’re Looking For:
5+ years’ experience in a relevant production or engineering role
Apprentice-trained in mechanical engineering/welding and fabrication
Expertise in stainless-steel purge TIG welding, P&ID interpretation, and temperature-controlled pipework systems
Problem-solving mindset and ability to work independently and within a team
Excellent communication skills and customer-focused approach
Full and current UK driving licence required
How to Apply: If this welder pipefitter role is for you then please “click apply” or contact Conor Wood 01484 645269 for further details.
....Read more...
Workshop Fitter Huddersfield£14.50 an hr (DOE), Potential earnings with overtime circa £40K a year, Weekly Pay, Overtime paid at x1.5 Modern workshop, free parking, flexible working hours, (6am – 4pm/7am 5pm)Monday to Friday | Permanent PositionJoin a leading name in the automotive industry as a Workshop Fitter. This is an exciting opportunity to be part of a growing, reputable organisation known for its modern facilities and clean, well-equipped workshops.The role would be assisting with the building and conversion of Trucks and Trailers. No prior experience needed as full training will be given. However, you need to have experience using hand and power tools such as drills, grinders, saws etc.Working Hours for the Workshop Fitter - Monday - Friday, standard hours
What’s in it for you as our Workshop Fitter?
Starting salary circa £13- £14.50- an hr
Overtime available and paid at x1.5
Permanent Position
Your Role: As a Workshop Fitter, you’ll be working on vehicles, focusing on both bodywork and chassis-mounted equipment. Your daily tasks will include:
Disassembling and assembling body-mounted components
Following SOPs
Drilling, assembling, Fitting, Grinding (interior and exterior fixtures)
Carrying out light fabrication tasks – measuring, cutting, and grinding/using saws
What we’re looking for: Candidates with experience in the following areas are encouraged to apply:
Vehicle body building or coachbuilding
Mechanical engineer
Vehicle Fitter
Assembly Fitter
....Read more...
Reporting to the Technical Manager the candidate will learn and implement:
The use of mathematical modelling to research new developments and innovations
The design of technical plans / drawings for prototypes
The use of computer-aided design (CAD) and computer assisted engineering software
Collect and modify data from testing
Modify product design ahead of manufacture
Write and present reports to Technical Manager
Day to day tasks in the running of a busy product and tooling design environment
Training:
The apprentice will be working towards the Level 4 Engineering Manufacturing Technician Apprenticeship Standard
Qualifications include: Level 4 HNC in Engineering or Manufacturing - Mechanical pathway
College attendance will be at the Colchester Institute - Colchester Campus one day per week during term time
Training Outcome:
Following the apprenticeship the candidate will progress to a qualified product design engineer, eventually leading to Management
Employer Description:Nico Manufacturing Ltd are a long established, successful double-glazed window and door hardware manufacturer that includes hinges, locking systems and architectural hardware. Employing 150 people we are a one stop shop for all operations in the design and production, including press work, electroplating, diecasting plastic mould injection, tool design and manufacture. The technical team consists of 5 persons in the design, testing and production of tooling and product.Working Hours :Monday to Thursday
08:00- 16:30
Fridays
08:00- 15:30
With a 30 minute break each daySkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Fit Out Engineer (FTC) - Client Direct - Days - Brand New Commercial Office - City of London- £55,000 + BonusExciting opportunity to work In House / Client Direct Company in City of London . My client is looking for a Fit Out Engineer to be based in a brand new commercial building in City of London on a fixed term basis until at least August 2026. The successful candidates will be electrically or mechanically qualified (C&G / NVQ) with a proven track record in commercial building fit outs, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the fit out team and Supervisor on site, he or she will have experience carrying out electrical, mechanical, plumbing, HVAC installations. In return the company are offering a competitive salary of £55,000.Review and monitor access into landlord areas and plantrooms.Deputise for the Fit-out Supervisor in their absence. Attend fit-out meetings and coordinate with fit out coordinator and M&E consultants.Monitor the tenant’s fit-out project, identifying any potential impacts to the base build infrastructure.Undertake tasks as directed by the Fit-out Supervisor, ensuring all work is carried out to required codes of practices and standards.Verify commissioning and any integrations to base build systems, ensuring systems and O&M are updated.Ensure the CAFM system is updated with sufficient information following any reactive tasks.Carry out fault finding, diagnostics, and rectification on HVAC systems, escalating where necessary.Maintain effective communication with the Fit-out Supervisor, shift and engineering management team including plant status, isolations, ongoing work, and standards of housekeeping. Plant areas, workshops, stores, and changing areas are kept to the highest standards Supervision and monitoring of contractors carrying out work for Brookfield Properties and or fit out contractors.Always uphold the integrity of the company and ensure the provision of high levels of customer services are provided.Ensure the accurate and timely completion of logbooks on completion of any related activities.Escalate any defects and incidents immediately to engineering management.Complete any assigned mandatory training courses.Complete any site-specific system training as directed by your line manager.Complete relevant Competent Persons Assessment within relevant discipline, within the agreed timeframe.Ensure any parts required are clearly and accurately stated and any difficulties encountered on engineering activities are reported to the Engineering Management team.Act as site Competent Person when on duty, in accordance with the Company Safety Rules and Procedures.Hours of workMonday to Friday08:30 - 17:30Package£55,000 salary + bonus25 days annual leave + bank holidaysEmployer Pension Contribution of 7.5%BUPA Private Medical and Dental – with family upgrade availableEAPHealth Assessments every 2 yearsLife Assurance – 4x times salaryIncome ProtectionCritical Illness InsuranceTravel InsuranceWill WritingAnnual Eyesight tests and flu vaccinationsEnhanced family leave paysponsorship for professional /educational studiesindustry leading training schemeDiscounts and cash backs across retail, travel, entertainment etc. RequirementsElectrically or Mechanically qualified Level 3 / HNC / HND18th Edition if electrically qualified Review contractor and tenant RAMS and monitor permits to work.IOSH Managing SafelyAt least two years experience in a similar role in a corporate environmentProficient in the use of CAFM systems to complete reactive work orders.Proficiency in MS Office (Word, Excel, PowerPoint). Analytical mindset, able to interpret data to drive continuous improvement and service efficiency. Initiative to suggest and develop new ideas to increase efficiency and cost savings. Ability to prioritise tasks to meet deadlines. Strong communication skills and the ability to deal with staff at all levels. Reliable and conscientious. A strong team ethos and willingness to help out in all situationsExperience of working in engineering teams and or fit out teams.Highly desirable (Not essential)Experience of system modifications and minor installations. Project supervision of M&E fit-outs. Awareness of the Tenant and landlord relationship within multi-occupied properties.Understanding of energy management systems and energy reduction initiatives. PASMA and IPAF qualifications. First aid training.Authorised Person in Electrical or Mechanical discipline. If you are interested please get in contact with Fin Havering of CBW Staffing solutions....Read more...
The Engineering Manager opening is working Days Monday to Friday in the Wigan area of Manchester, providing the opportunity to be able to progress within a market leading manufacturing company. The company and site is part of a market-leading international manufacturing organisation, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and personal development opportunities.What’s in it for you as a Engineering Manager:
Basic salary of upto £56,000 per annum
15% Annual KPI Bonus
Family private Health Care
8% Company Pension
3x Life assurance on salary
Location - Wigan
Certified Training opportunities
Monday - Friday DAYS based
Excellent employee benefits program, employee benefits program, discount card for supermarkets etc
Duties of Engineering Manager:
The development of maintenance plans and systems, driving PPMs
Undertaking improvement projects as part of the maintenance team
The leadership and development of a small team of engineers
Responsible for subcontractor management and safety
Responsible for identifying and eliminating recurring plant issues through engineering improvements
Hands on/Hands off mix
Experience and Qualifications Required for Engineering Manager:
Engineering qualified City & Guilds, ONC, NVQ 3 or equivalent qualification in either Mechanical Engineering or Electrical Engineering
Experience managing large CAPEX and Investment Budgets
Previous experience as a Maintenance Team Leader, Maintenance Manager, Maintenance Supervisor, Engineering Manager, Maintenance Planner, Lead Engineer etc
Previous experience of undertaking maintenance within a manufacturing environment
IOSH or NEBOSH Trained
Previous experience of the development and application of PPM and TPM activities
This position would suit a Maintenance Manager, Maintenance Team Leader, Engineering Manager,Maintenance Supervisor....Read more...
Embedded Software Consultant – Defence – Cambridge
A growing and technologically intriguing Defence company, based in Cambridge, is seeking experienced Embedded Software Consultants or Engineers to assist in the development of newly invented technologies that will enhance the defence and safety of the UK.
Your Embedded Software experience should be specifically in Embedded C. Ideally, you will have experience in the Defence sector; however, we are open to candidates from other complex sectors. It will be essential that you could obtain security clearance.
Knowledge of prototyping, using C, C++, MATLAB, or another software language will be highly advantageous.
It is expected that you hold a degree in a software or electronics field, or another field that would have led you into an Embedded Software Engineer role.
We are open to candidates at various levels of experience, ranging from those with a year or two of industry experience to more senior roles. The level of responsibility will depend on your level of experience and skills.
You will be working in a multi-discipline division, including mechanical engineers, software engineers, electronics engineers, physicists, and other industry professionals with whom you will be collaborate and learn from.
Due to the expansion of this team, it is an exciting time to join and will result in career growth and opportunities that arise from the company’s natural growth.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonus, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
We are seeking a Senior Process Safety Consultant to join a leading engineering consultancy, delivering complex safety projects across high-hazard industries including chemical, pharmaceutical, oil & gas, clean energy and nuclear. This is a hybrid, days-based permanent role based in the Greater Manchester Region, offering up to £65,000 per annum DOE, plus a comprehensive benefits package.This role blends technical project delivery with client leadership. You will manage safety and risk projects from concept through to completion, ensuring high-quality outputs, budget alignment, and compliance with UK safety regulations. Your expertise will support clients through regulatory frameworks such as COMAH, ALARP, and functional safety standards.As a Senior Process Safety Consultant, you will also mentor junior team members, lead multidisciplinary delivery teams, and contribute to the growth and development of the safety function through both technical excellence and trusted advisory support.Senior Process Safety Consultant Responsibilities:
Lead and deliver safety and risk projects across a variety of sectors.
Facilitate hazard studies including HAZID, HAZOP, LOPA, ALARP, OBRA, and FMEA.
Produce COMAH Safety Reports and conduct formal assessments such as QRA and consequence modelling.
Lead development and improvement of PS management systems.
Deliver functional safety and machinery safety project scopes.
Provide technical guidance and mentorship to junior consultants.
Oversee and coordinate multidisciplinary project teams.
Support business development through client engagement and identification of new opportunities.
Senior Process Safety Consultant Requirements:
Strong technical capability in safety techniques (e.g., HAZOP, QRA, ALARP, LOPA, OBRA)
Chartered Engineer with a degree in Chemical, Mechanical, or Control/Electrical Engineering
Excellent communication and technical report writing skills
Proven ability to lead and manage project teams
In-depth knowledge of UK safety legislation and major accident hazard regulations
Eligible for UK security clearance (due to the nature of some work)
Please apply direct or contact Sean Turner at E3R for further information regarding this Senior Process Safety Consultant opportunity.....Read more...
The Engineering Supervisor vacancy is working at a market leading FMCG Manufacturing firm. It is working with a PLC listed and market-leading manufacturing group at a world class facility. This opportunity offers fantastic company benefits such as competitive pension, premium overtime available, plus extensive accredited OEM training and personal development opportunities, with a route through to Engineering Management group roles.The business truly values its employees which is reflected in the generous package and site facilities. This is an exciting time to join the business with the multi-million Capex due to complete soon, which bring industry-leading production and operational facilities.What’s in it for you as Engineering Supervisor:
Basic salary circa £65,000
Production bonus
Competitive pension
Location - Bailsdon
Hours of work – 4 on 4 off shift pattern
Employee benefits program
Genuine career progression into group roles
OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskilling
The ability to work within a skilled team of engineers permanently
Key responsibilities of Engineering Supervisor
The leadership of Engineering teams, covering both automated and semi-automated parts of the plant
International Management Skills, The development and promotion of lean manufacturing techniques,
To identify opportunities to further automate manufacturing processes
To develop multi-functional / flexible manufacturing teams across operations
Implement and push Engineering KPIs across the site
Experience and Qualifications Required for Engineering Supervisor
Engineering qualified; City & Guilds, ONC, BTEC Level 3, NVQ Level 3, Apprenticeship or equivalent in Electrical or Mechanical Maintenance
Previous experience as an Engineering Team Leader, Maintenance Supervisor, Engineering Manager, Maintenance Manager, Engineering Planner Lead Engineer etc
Strong Health and Safety awareness
Previous experience of undertaking maintenance within a manufacturing environment
Previous experience of the development and application of PPM activities
....Read more...
As an apprentice to Hayward Tyler, you will be trained to become a skilled Engineering Fitter with training in core areas such as, interpreting drawings/specifications for required components or assemblies, refurbishing/fault finding and problem solving, using various tooling & equipment, quality checking/testing and calibration of units/components.
The Engineering Fitter Apprenticeship is aimed at people who wish to gain real engineering qualifications as well as practical on the job skills. This is achieved through a combination training/tuition and work-based learning activities.
Please note, whilst not confirmed, the training provider for this apprenticeship may be based in Northampton and applicants will need to be able to get to this location on a weekly basis.Training:Engineering Fitter Level 3 Apprenticeship Standard:
The 4 Year Apprenticeship programme is structured in partnership with the college and is organised as follows:
Year one:
Gaining skills in understanding, reading engineering drawings, basic assembly and dismantlement, hand tools/techniques and measuring equipment
Year Two:
Specific training in core areas to develop skills such as planning work activity, resources, equipment and tooling
Year Three:
Developing your workshop skills using more focused techniques
Year Four:
Working towards being a skilled Fitter and improving competence in a chosen speciality
Training Outcome:
We have a track record of nurturing the skills and talents of our apprentices
The invaluable skills and qualifications you'll gain throughout our apprenticeship program will open doors to various roles within the company, such as Mechanical Fitter, and pave the way for career advancement to positions like Production Engineer
Employer Description:We are a pump and motor manufacturer based in Luton.Working Hours :Monday - Friday. Shifts to be confirmed.Skills: Problem solving skills,Logical,Team working....Read more...
Adherence to all Health & Safety procedures, working in a safe and efficient manner
Loading and unloading of goods from vehicles
Checking and receipt of goods delivered, recording and distribution of products to the correct location for put-away
Packing, picking and labelling of stock for final delivery
Printing delivery notes and organising for delivery runs
Compliance with company procedures with the use of mechanical handling equipment, carrying out safety checks regularly
Using company warehouse management system correctly, following all procedures regarding picking, booking deliveries in, stock management
Corresponding with internal departments when necessary
Assisting with stock taking
Liaising with suppliers, if necessary
Keeping warehouse/yard area clean and tidy
Utilising Exchequer system to assist with correct stock management
Portraying professional demeaner
Undertaking other duties to meet the needs of the business
Training:
Supply Chain Warehouse Operative level 2
End Point Assessment
Work Based Training
Monthly Tutor Sessions
Functional Skills Training (if necessary)
Training Outcome:Progression is initially available within the warehouse team, with potential for further progression depending on performance.Employer Description:Premier Contract Supplies was set up in 1998 by Vince Caldicott, a former heating engineer who owned Premier Heating Supplies - a company selling heating supplies and bathrooms to the public.
Whilst running PHS he saw that there was a gap within the contract market for a high quality sanitary ware supplier, and Premier Contract Supplies was born. We started with a small team based in Frimley, with a warehouse unit of 2,000 sq ft. Within three years the company had purchased the property at Farnborough – our current head office – and acquired 18,000 sq ft of warehouse space.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,Number skills,Logical,Initiative,Physical fitness....Read more...
Ensure that any health and safety guidelines are followed in accordance with the EHS organisational arrangements roles and responsibilities, including maintaining (and improving where possible) 5S standards and ensuring the correct PPE is worn.
Learn, support, and operate in the following key areas:
Milling
Turning
Grinding
Assembly
Test
Material handling
Maintenance
Inspection
Learn and support in the following key areas:
Environmental and Health & Safety
Quality
Process Engineering
Design Engineering
Planning
Procurement
Finance
Other activities and projects as required to support the site
Training:Training will take place at Yeovil College and at the employer's premises.
1st Year - 2 days a week at College
2nd & 3rd Year - 1 day a week at College
4th Year - primarily in the workplace.
After a period of Engineering foundation skills and technical knowledge development, all apprentices will be required to achieve the following qualifications:
Pearson BTEC Level 3 Diploma in Advanced Manufacturing Engineering (Machining) (Development Technical Knowledge)
Training Outcome:You will develop a wide range of skills throughout the Apprenticeship. If successful in reaching and completing your academic and practical qualifications and goals, a full-time position will be offered within the company.Employer Description:Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For 100 years the company has engineered the success of its customers in a wide range of diversified industrial and aerospace markets. Parker’s engineering expertise and broad range of core technologies uniquely positions the company to help solve the world’s greatest engineering challenges.Working Hours :Monday to Thursday 08:00 - 16:45 (including 30 minute break)
Friday 07:30 - 12:00.Skills: IT skills,Problem solving skills,Number skills,Analytical skills,Team working,Initiative,Mechanical Engineer knowledge....Read more...
An apprenticeship is all about learning new knowledge, skills and behaviours, therefore, to be considered for this role you must be able to demonstrate a genuine interest in engineering and a willingness to learn.
To be considered for the role of Electromechanical Engineering Apprentice, you will have a keen eye for detail and take pride in completing work to a high-quality level.
Joining the Huhtamaki team as a Maintenance Engineer Apprentice, your role will be focused on assisting the engineers and operators on site. The role will include:
Being capable of diagnosing the faults & causes on a wide range of equipment
Carrying out routine planned maintenance to production equipment
Learning how to maintain and update all maintenance and equipment documentation, which will include PC based systems, accurately and on time
Learning an appreciation of Electrical Systems
Understanding how to investigate and correct processing problems with the assistance of an engineer and the operating personnel
Training:This Electromechanical Engineering Maintenance Apprenticeship programme forms part of Huhtamaki’s succession planning for the future. You will be trained, supported and monitored throughout the process.
During your apprenticeship you will be paid and day released to PETA’s Havant training centre for off the job training. You will learn how to work safely, work efficiently, use technical information, maintain mechanical and electrical equipment and use hand tools.
Your Level 3 programme will include, a level 3 Engineering work-based qualification delivered by PETA, and day release for 24 months to complete a level 3 BTEC technical certificate.
Overall duration is 48 months.Training Outcome:The career opportunities at Huhtamaki are very varied. We have a strong track record of training and developing people to reach their full potential. Our previous apprentices have gone onto become valuable members of our team.
Fulltime employmentFurther personal developmentEmployer Description:Our ambition is to be the first choice for sustainable packaging solutions, globally. We strive to earn this position every day with our innovative products that ensure hygiene and safety for food on-the-shelf and food on-the-go. We believe in protecting food, people and the planet and enabling wellbeing and convenience for people around the world. Our Company values are Care, Dare & Deliver and we live by these every day.
Huhtamaki is a dynamic international company with a proven track record for training and developing people. We see engineering apprenticeships as key to the company’s future success. We support our apprentices to achieve their full potential offering rewarding career options with development opportunities in the future.Working Hours :Monday - Friday, 08.00 - 17.00.
In the first year you will be working core hours of Monday to Friday with one day for day release to attend PETA training.
Year 2, 3 and 4, shift pattern is to be confirmed dependant on progress.Skills: Good problem solving skills,Learn through instruction,Enthusiastic team player,Self motivated and driven,Excellent communication skills,Positive attitude,Willingness to learn,Good manual dexterity,Real interest in maintenance,Good co-ordination,Methodical and logical....Read more...
Considered doing something out of the ordinary? Take the plunge into an exhilarating world that really makes a difference to people's lives with an engineering apprenticeship at Asymchem.
A springboard for your career, our engineering apprenticeships enable you to study for nationally recognised qualifications, while gaining invaluable on-the-job experience and skills.
What's more, you'll immediately start earning a salary and many of the benefits enjoyed by all our employees.
This four-year multi-skilled course will expose you to the engineering disciplines of Mechanical, Electrical and Control & Instrumentation.
You'll learn core skills in your preliminary year, after which you'll experience first-hand what it's like to work directly with the engineering teams who support our cutting-edge pharmaceutical environment.
Types of mechanical, electrical, electronic and instrumentation engineering work carried out on our production equipment and building services include:
Planned Maintenance:
Inspection
Predictive e.g. vibration analysis, thermography and ultrasonic techniques
Preventative
Calibration
Corrective Maintenance:
Breakdowns
Repairs
Fault diagnosis
Projects:
Planning
Continuous improvements
BTEC & HNC training project
Commissioning
You will also have specific training both onsite and at relevant centres to allow you to do your job. These may include:
Safety (SSoW)
Working at heights (ladders. towers and MEWP's)
Isolation (LOTO)
Electrical Regulations (IEE)
Manual Handling
Risk Assessment
DSEAR (Hazardous areas)
Welding
Machining
PLC's
Instrumentation
The position of Maintenance Engineer involves providing essential support to ensure consistent operation and regulatory compliance of pharmaceutical equipment and utility supply services.
Responsibilities include installing, managing and maintaining hazardous and non-hazardous area equipment used to power and control engineering systems, machinery and processes, documenting task completion, diagnosing & repairing equipment breakdowns, coordinating vendor repair efforts, and supporting Building Energy Management Systems to ensure efficient control and operation of facility equipment.
The Engineering team at Sandwich play a vital role in drug R&D and manufacturing operations by ensuring workplaces, manufacturing equipment and building services are available and continually improved; this supports our mission to drive smarter, greener, and more cost-effective manufacturing to support clinical research and commercialisation.
Our apprentices contribute fully to this aspiration through the work they conduct in the Asymchem workplace. We believe our most precious resource is our people. We want to unleash the power of our people. This drives our desire to invest in, develop and stretch all our apprentices. You will be encouraged and supported to seek opportunities beyond the apprenticeship qualification. In the later years of the apprenticeship, you will take ownership of improvement projects, contributing in the same way as all of our team members.
We recognise the passion, knowledge and diversity that talented people bring to Asymchem, so we are dedicated to ensuring that we provide equal opportunities to our apprentices.
We will help you grow and thrive during your apprenticeship, ensuring you emerge as a confident and talented Engineer at the end of your four years with us.Training:This Level 3 Apprenticeship Standard in Maintenance and Operations Engineering Technician can be flexible depending on the training plan designed by the employer and provider; however, it will need to meet the requirements of the End Point Assessment.
Typically, in the first year, the apprentice will attend four days in a week completing practical skills within the IPS Rochester workshop (Performing Engineering Operations). They will also attend one day a week studying the Technical Certificate
In year two the apprentice moves to day-release and will attend the Training Centre one day a week to continue the Technical Certificate, whilst working at the employer's site in the remaining 4 days.
Starting in year 2, and continuing until they are ready for the End Point Assessment in year 4, the apprentice will receive regular training contact with IPS and their assigned Trainer
Training Outcome:Asymchem Ltd are keen to progress their Apprentices to HNC Level in years 3 & 4 depending on results from the BTEC National Diploma, also and if available, to further positions within the organisation.
Should there be relevant positions available at the completion of the Apprenticeship, then the successful applicants will be invited to apply for the vacancies.Employer Description:As the specialists in skills for science and technology, our purpose is to make sure your business; your people and our industry are future ready.
We are a not-for-profit charitable organisation with a family of commercially focused companies committed to supporting the skills, needs and ambitions across the UK science and technology sector.Working Hours :Monday to Friday, between 8am – 4.10pm. Lunch break 12pm - 12.45pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
This apprenticeship combines old-school engineering with cutting-edge technology.
You will assist with preservation, maintenance, restoration and service of classic vehicles
You will be taught about the history and development of vehicles, components and materials, servicing, tuning, transmissions and drivetrains, chassis, suspension, steering, braking and electrics
The apprenticeship also includes Technical Drawing, welding, business studies and advanced diagnostics
Training:Qualification:
The ‘HET Level 3 Apprenticeship’ is a nationally recognised qualification delivered by ‘HSA’ from its Mechanical Academy based at ‘Bicester Heritage’ in Oxfordshire
Delivered over 36 months on a block release basis, you will attend your academy on average every 5 weeks for a 5-day block of training running from Monday to Friday, the remaining 80% of the time you will be working with your employer
If required, your employer will cover the Accommodation and travel costs
Training Outcome:
On completion of the Programme, you will be qualified as a Heritage Engineering Technician
Employment with Kenworthy and Co after completion of the apprenticeship is not guaranteed but very likely, subject to performance and a position being available
The classic vehicle industry is thriving and the companies that HSA work with are world-class. Prospects for progression range from specialist technical roles to management positions and international work opportunities. Employer Description:Kenworthy & Co Vintage Motor Works was founded by Lee Kenworthy with a vision to fulfil a lifelong ambition working on Vintage motor cars from an era he should have been born into. It has established an international reputation for the quality of work on classic marques including Rolls-Royce & Bentley. It has won numerous awards at national and international rallies and competitions and offers a rare opportunity for an enthusiastic engineer to join world-renowned team of specialist Engineers.Working Hours :Monday- Friday
8am- 5:30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
The apprentice on this Degree Apprenticeship programme will be training to become a manufacturing engineer, gaining both academic knowledge and practical experience across a wide range of manufacturing specialisms. Their average day or week will be varied and hands-on, involving technical work, project coordination, and interaction with customers and colleagues.
Typical tasks the apprentice could be involved in include:
Supporting system changes and upgrades, while ensuring customer expectations are managed and any necessary disruption to production is clearly communicated and minimised
Working professionally on-site, representing the company’s interests when dealing with customers and contractors
Accurately recording time spent on-site and on production-related tasks using company-specified tools
Completing project documentation on time and to company standards, including checklists, method statements, risk assessments, and electrical drawings
Following health and safety regulations specific to the company and site, and reporting any issues or deviations
Opportunities to travel to sites across the UK and overseas to commission system modifications and new installations
Proactively working to meet deadlines and escalating any issues that might impact project timelines
On the technical side, the apprentice will:
Create and update electrical schematics using AutoCAD LT
Diagnose and resolve faults with a strong electromechanical understanding
Apply their electrical knowledge to at least City & Guilds 18th Edition level to install, maintain, and support Promtek systems
Read and interpret digital process trends and electrical schematics accurately
Be competent in the design of control panels, using information such as schematic diagrams, I/O lists, or data gathered during project scoping
They will also be involved in project planning and execution, including:
Planning project stages, from initial concept through to quality assurance
Liaising with and outsourcing to subcontractors, suppliers, and service providers to ensure successful delivery
Providing accurate hardware and labour costings to support precise quotations
Monitoring budgets and updating order board progress, ensuring spending remains within agreed limits
Troubleshooting issues to maintain smooth project progression
Supporting the Head of Projects in maintaining high standards across all tasks
Assisting in reporting project progress to senior staff or other stakeholders
Ensuring the project remains compliant with all relevant internal and legislative regulations
Helping to delegate tasks to team members, where necessary, to keep projects on schedule
Overall, this apprenticeship offers a comprehensive foundation in manufacturing engineering, combining hands-on technical training with project management, problem-solving, and customer service skills – all essential for a successful career in the field.Training:
Apprentices will undertake the level 6 Manufacturing Engineer Degree Apprenticeship programme delivered by University of Staffordshire
Teaching will be a mix of on the job and off the job training delivered face to face in university and online weekly sessions. The programme is delivered using a blended learning model
The programme is delivered at University of Staffordshire. Apprentices will attend an induction at the beginning of the apprenticeship before the launch of the first modules. There is a four-day module launch for each learning block in October, February and May. The module launch is designed to provide apprentices with an overview of the module and its assessment. There will be a number of presentations, activities and the opportunity to get to know your tutors and other apprentices as well as a tour of the library and other university facilities
To accommodate wide-ranging learning styles, approaches to teaching will be diverse, including but not limited to technical demonstrations, lectures, seminars, independent research, laboratory assignments and simulation exercises, design work, practical problem-solving tasks, presentations and group critiques
Upon successful completion of the apprenticeship, apprentices will achieve their BEng (Hons) in Mechanical Engineering
Training Outcome:Upon successful completion of the Degree Apprenticeship in Manufacturing Engineering, the apprentice can expect a clear and rewarding career progression within the Projecting Department
The typical pathway is designed to support ongoing professional development and a gradual increase in responsibility.
Graduate Manufacturing/Project Engineer
Project Engineer
Senior Project Engineer
Project Manager / Technical Lead
Further Opportunities:
Opportunities also exist to specialise further (e.g., in automation or systems integration), pursue chartered status, or move into senior management roles depending on ambition and performance
Employer Description:Promtek is a vibrant, family-run business established in Brindley Ford, Staffordshire in 1972. Promtek was established by Peter Williams with engineering at its heart and based upon the desire to provide expertise in
designing and integrating process control and automation systems for a variety of bulk material handling industries.
Fast forward to the present and although Peter is now semi-retired he still remains active in the business with his sons Charles and Simon and Daniel taking over the daily reins.
Promtek has grown to specialise in Process Control and Automation, Recipe and Formulation Management Tools, Weighing and Calibration and Turn-Key System Integration.
At Promtek we apply our in-depth skills, experience and expertise to developing unique and effective solutions for our clients, using off-the-shelf hardware and utilising the software engineering know-how of our in-house engineering team.
Our service and support team offer 24 hours of cover, 7 days a week to assist with breakdowns and critical spares and carry out routine service visits to inspect and maintain process weighing equipment and platform scales and certify them using Trading Standards approved weights.Working Hours :Monday - Friday, 8.00am - 4.00pm
May vary dependent on needs of the employerSkills: Communication skills,Organisation skills,Problem solving skills,Effective Time Management,Adaptability and willingness,Enthusiastic and Reliable,Self-Driven....Read more...
JOB DESCRIPTION
The Process Engineer provides process engineering support for raw materials, compounding, production and packaging functions to improve safety, quality, service and cost efficiencies in the operations area in the Pacific, MO manufacturing plant.
Responsibilities
Support daily production needs through process troubleshooting, experimentation and support for production requirements. Work with project managers on designing and installing PLC controls for capital projects. Work with Allen-Bradley PLC's to maintain and improve current operations. Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation. Implement necessary changes and update all documentation (including drawings and SOP's) accordingly. Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant. Ensure completion of projects within budgets. Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions. Responsible for safety devices, safe design, etc. of all equipment. Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance. Create and maintain P&IDs for current and future processes. Support the implementation of statistical process control by implementation of data collection systems Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements. Troubleshooting machinery, including PLC coding adjustments.
Qualifications
Bachelor's degree in mechanical, Electrical, or Industrial engineering. 0 to 3 years' experience in manufacturing environment. Six Sigma/lean manufacturing experience. Safety and ergonomic experience. Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process. Mechanically inclined with a hands-on approach Previous Capital Project experience Ability to read and interpret process drawings Strong interpersonal skills: good communication skills both written and verbal. Strong Analytical & Troubleshooting skills. PC usage with MS Office Suite Strong AutoCAD skillset. (3D design utilizing Inventor Professional or Solidworks is plus) Experience with PLC's, Allen Bradley is desired.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online!....Read more...
Assist in the maintenance, repair, and servicing of machinery, equipment, and facilities
Support planned preventative maintenance (PPM) activities to minimise downtime
Learn how to diagnose faults and carry out repairs under supervision
Work with mechanical and electrical systems, developing technical expertise
Assist with breakdowns and troubleshooting to restore operations quickly
Maintain accurate records of work carried out using maintenance logs
Follow health and safety guidelines, ensuring a safe working environment
Work closely with engineers, production teams, and external contractors
Contribute to continuous improvement projects to enhance reliability and efficiency
Attend training courses and complete all necessary assessments as part of the apprenticeship programme
Training:Mechatronics Maintenance Technician Level 3.
As part of the training programme, you will have 1-day where you attend college, and the other working days will be spent with your employer. Training Outcome:
Maintenance Engineer
Maintenance Supervisor
Employer Description:Pentaxia Ltd is a leading UK-based advanced engineering company, specialising in the design and manufacture of high-performance composite tooling and components. Founded in 2008, the company has grown rapidly and now operates from a state-of-the-art 70,000 sq ft facility on a six-acre site on Alfreton Road in Derby, Derbyshire.
Privately owned and family-run, Pentaxia combines cutting-edge technology with a dynamic and supportive working environment. The company serves a wide range of high-tech industries including aerospace, defence, luxury automotive, and motorsport. With a strong focus on innovation, Pentaxia is known for its expertise in 5-axis machining and advanced composite manufacturing, supported by a team of over 140 skilled professionals.
Pentaxia is proud of its collaborative culture, continual investment in people and equipment, and its commitment to delivering high-quality, dependable engineering solutions. Apprentices joining the team will benefit from hands-on experience in a fast-paced, forward-thinking environment that values learning, precision, and teamwork.Working Hours :7.30am - 4.00pm Monday to Thursday, 7.30am - 12.30pm Fridays.
If appropriate, determined by age and experience, may be eligible to complete overtime.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Initiative,Patience,Physical fitness,Willingness to learn....Read more...
As an Apprentice Fabricator/Welder, you'll be initially responsible for (but not limited to) the following:
Carry out fabrication and welding activities including use of a MIG set, various tooling and equipment;
Accurately interpret CAD/technical drawings and mark-out;
Ensure correct marking up of component parts;
Working to quality standards required for the components;
Welding joints in accordance with approved welding procedures and quality requirements (TIG, MIG);
Using a variety of equipment to shape, form and cut metal materials;
Undertaking final inspections of finished components;
Maintaining a clean, organised and productive work area;
Ensure job timings are met/exceeded.
You’ll develop your skills alongside dedicated Europa Engineering employees who are eager to pass on their knowledge and very familiar with the apprenticeship process. You will learn a variety of duties and support the whole business. You’ll be taught and mentored to achieve your full potential and create the foundation of a career in engineering.
If you are committed and ready to take your first step into a career with a successful and supportive employer, then please apply now! This apprenticeship and opportunity with Europa Engineering will be highly competitive, so do not miss your chance!Training:The successful candidates will continue their studies with apprenticeship specialists, RNN Group at their Rotherham campus on a day release format, giving you the training and support you need to become an all-rounded and successful Engineer.
The Apprenticeship Standard you will be studying is Engineering Operative – Fabrication/Welding – Level 2.Training Outcome:Progression to industry specialist qualifications – further and higher skill development. A lifelong career in the industry with Europa Engineering Ltd.Employer Description:Europa Engineering specialise in mechanical handling and fabrication, offering their customers everything from product concepts, engineering and design all the way through to installation and commissioning. With a vast knowledge of the automotive industry, their expertise has won them many contracts with well-known car manufacturers. As their customer base widens, Europa want to train new staff into becoming the next generation of skilled fabricators and welders. This available position will allow the right individual the chance to gain a lifelong career in a well-established and highly supportive business.Working Hours :Monday – Friday between 8.00am – 4.00pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Logical,Team working,Initiative,Work under pressure,Ability to prioritise workload....Read more...
As an Apprentice Fabricator/Welder, you'll be initially responsible for (but not limited to) the following:
Carry out fabrication and welding activities including welding pipework, use of a MIG/TIG set, various tooling and equipment;
Accurately interpret technical drawings;
Ensure correct marking up of component parts;
Working to quality standards required for the components;
Carrying out installation work when required;
Weld joints in accordance with approved welding procedures and quality requirements (TIG, MIG);
Use a variety of manual equipment to shape, form and cut metal;
Undertake final inspections of finished components;
Maintaining a clean, organised and productive work area for colleagues and yourself;
When trained, ensure job timings are met/exceeded.
You’ll develop your skills alongside trained engineers who are eager to pass on their knowledge, helping you learn a variety of duties and how to support the whole business. The book does not stop with fabrication and welding, you’d also have the opportunity to develop mechanical and hydraulic skills. You’ll be mentored to achieve your full potential and create the foundation of a career in engineering.
If you are committed and ready to take your first step into a career with a fantastic employer, then please apply now! This apprenticeship and opportunity with Stonefield will be highly competitive, so don’t miss your chance!Training:The successful candidates will continue their studies with apprenticeship specialists, RNN Group at their Rotherham College campus on a day release format, giving you the training and support you need to become an all-rounded and successful Engineer.
The Apprenticeship Standard you will be studying is Engineering Operative - Fabrication/Welding - Level 2.Training Outcome:Further industry appropriate training.
A lifelong career in the engineering industry with Stonefield (2010) Ltd.Employer Description:Stonefield (2010) Ltd are a leading provider of pipe fittings and all engineering services. Their experience leads them to work for a variety of customers on varying projects.
Stonefield are very invested in apprenticeships and upskilling, and have a team of staff trained to a high level of expertise.......Would you like to be the next one?Working Hours :Monday - Friday, 08:00 - 16:30.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative,Work under pressure,,Good attitude to work,Ability to prioritise workload....Read more...
As a Machine Shop Apprentice, you'll be initially responsible for (but not limited to) the following:
Operate manual and [when trained] CNC milling/turning machines
Inspect finished components & produce an Inspection report sheet
Ensuring tooling, fixtures, gauges, drawings, etc are available, prepared and the machining process is documented and understood in readiness for the next job
Work safely and in line with written procedures, carrying out your own risk assessment before commencing work
Use a variety of hand tools
Comply with relevant environmental and safety standards
You’ll develop your skills alongside trained engineers who are eager to pass on their knowledge, helping you learn a variety of duties and how to support the whole business. You’ll be mentored to achieve your full potential and create the foundation of a career in engineering.
If you are committed and ready to take your first step into a career with a fantastic employer, then please apply now! This apprenticeship and opportunity with F&W will be highly competitive, so don’t miss your chance!Training:The successful candidates will continue their studies with apprenticeship specialists, RNN Group at their Worksop campus on a day release format, giving you the training and support you need to become an all-rounded and successful Engineer.
During the apprenticeship you will learn about materials, speeds, feeds and a range of machining techniques. In addition to completing the Level 2 apprenticeship, you will also be required to undergo in-house training relating to health and safety and other mandatory “toolbox talks”.
The Apprenticeship Standard you will be studying is Engineering Operative – Mechanical Manufacturing – Level 2Training Outcome:Further and higher skill development/qualifications. A lifelong career in the steel industry and progression opportunity with Furniss and White Ltd.Employer Description:Established in 1980, Furniss and White are a family-owned, independent British steel foundry specialising in castings, fabrications and precision machining.
Reputation, craftsmanship and innovation has fueled the company’s growth for over 40 years. Furniss & White now employs more than 110 people in five separate divisions; the company has continued to foster new generations of industry-leading talent through its apprenticeship programme.Working Hours :Monday to Friday
6am – 2:00pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Initiative,Work under pressure,Enthusiasm,Ability to prioritise workload....Read more...
Dalkia is fully committed to ensuring all apprentices have the best experience as this is the starting point of your career which we pledge to nurture and support throughout your course and progression.
The designated college for training will be in Newham, London.
The apprentice will be paired with an engineer every day and will be expected to assist in carrying out routine tasks such as inspections, electrical testing, mechanical fault finding and general building services maintenance. We are a maintenance service provider and the focus will be on a wide range of building services and for you to gain a good understanding of these however, should your course warrant exposure to installation work we are limited to what we can provide on our customer’s sites. We have a fantastic enthusiastic team who can support you every step of the way into your career in building services and coupled with management support and oversight we will ensure you will be successful in completing your apprenticeship course and portfolio of work.
Examples of daily tasks include:
To understand safe practices of working and always work in accordance with Dalkias’ health and safety policies and procedures for your protection and the safety of others.
Supervised and assisted maintenance of electrical /elechanical equipment such as pumps, boilers, hot and cold-water systems, drainage systems, heating systems, air handling and air conditioning units for example.
To carry out reactive works and repair faulty equipment within contractual service level agreements (SLAs) and timelines.
We require you to:
Always act professionally, including when on customer premises and dealing with customers.
Play a part in site visits and inspections and support getting the sites ready for client inspections, working with the health and safety team to ensure site documentation is understood and up to date.
Ensure our client’s equipment remains operational and complies with current safety documentation and legislation.
Take part in all apprentice activities planned by the company (e.g., annual apprentice event / training review etc.).
Take a proactive approach to their learning while on site and be vocal in what they would like to experience and want more exposure to.
Training:
As well as guided on the job training specific to our organisation you will study towards your Building Services and Maintenace Engineer Level 3.
You will attend college on day release during term time
A tutor will be assigned to you and you will receive protected study time within the workplace.
You will also get support from our apprenticeship team through mentoring and buddying.
Functional Skills level 2 in English and maths if required.
Training Outcome:Dalkia is fully committed to ensuring all apprentices have the best experience as this is the starting point of your career which we pledge to nurture and support throughout your course and progression.We really value our people and pride ourselves on our loyal team. We genuinely see this as a career opportunity for the right candidate and have an excellent apprenticeship track record.Employer Description:EDF Energy is a British integrated energy company, wholly owned by the French state-owned EDF, with operations spanning electricity generation and the sale of natural gas and electricity to homes and businesses throughout the United Kingdom.
Dalkia Facilities Ltd is a subsidiary of EDF Energy Ltd.
Everything we do is in service to our clients and their customers. We continuously find new and better ways of working to help our clients overcome the challenges of today and tomorrow.
We partner with our clients and are committed to realise their ambitions and deliver solutions to meet their needs. We are upfront, honest and act with integrity. By staying curious and pushing ourselves to find new and better ways of doing things, we’re constantly innovating, creating quality and adding value for our clients at every stage.Working Hours :Monday - Friday, 07.30 - 16.30.
With an hour for lunch.Skills: Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness,Mechanically minded,Curious-minded....Read more...
The role will be predominately based at our office in Macclesfield and the responsibilities will be split between three departments.
Calibration Lab:
Performing maintenance, repairs, and testing on various calibration equipment as per customer requirements, as well as for internal engineers for scheduled field-based jobs
Calibration of temperature, level, flow, electrical and pressure equipment
Calibrating equipment in line with UKAS standards, ensuring calibration equipment are safe, compliant, and certified against national and internationally recognised standards under supervision of the Lab and Accreditation Manager
Panel Lab:
Design and code Programmable Logic Controllers (PLCs) to automate processes according to customer specifications
Build and assemble automated systems based on design plans
Perform validation and testing of control panels and associated equipment to ensure functionality and compliance with specifications
Create detailed electrical and mechanical schematic drawings using CAD software
Field Based:
Shadow and as appropriate assist field-based engineers with calibration service jobs at customer sites to ensure systems operate correctly
Provide on-site support for equipment breakdowns. Diagnose issues, advise on solutions, and either perform immediate repairs or schedule follow-up service. If necessary, send parts to the lab for further analysis or repair under the supervision of the field-based engineer
Install and commission control panels and systems at customer sites. Ensure the installed systems operate as specified and meet customer requirements
Training:Maintenance and Operations Engineering Technician (level 3) - up to 36-months.
BTEC Diploma in Advanced Manufacturing Engineering (level 3).1 x day release during term time to attend classroom learning at Macclesfield College.Training Outcome:After completion of your apprenticeship, you will potentially have the opportunity to progress onto full-time positions within the business.Employer Description:Electroserv, is a leader in calibration services for the last 50 years. We have seen remarkable growth and expanded opportunities in the past decade, with plans for further expansion ahead. As a forward-thinking and innovative company passionate about Electrical, Control, and Instrumentation (EC&I) development we thrive on pushing boundaries to meet the diverse needs of modern manufacturing. We offer a complete service from design and configuration, express delivery, installation, UKAS accredited calibration to a full project life-cycle service.
What truly sets us apart is our people. Join our team and become part of a company that values innovation, supports growth, and celebrates success. At Electroserv, your contributions matter, and you'll have the opportunity to make a real impact and shape the future of the industry.Working Hours :Monday to Friday, hours TBCSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Problem Solver,Troubleshooting skills,Willing to learn,Professional,Quality focused,Risk aware....Read more...
Our apprenticeship programme combines college-based training with work-based learning, under the mentorship of our highly skilled engineering team. From September 2025, the first four weeks of your apprenticeship will consist of intensive training at The Grimsby Institute, Nuns Corner, DN34 5BQ. You will then work three days per week at Polypipe, Holmes Way, Horncastle, LN9 6JW, and return to The Grimsby Institute for two full days each week. In Year 2, you will attend college one day per week, spending the majority of your time at our Horncastle site, learning and being mentored by our team of experts. Supported by your training and our team, your tasks will include:
Mechanical and electrical maintenance, installation, fault-finding and repair
Reading and interpreting engineering drawings
Learning pneumatic and hydraulic systems
Working with programmable logic controllers (PLCs)
Responding to production machinery breakdowns
Assisting with the completion of maintenance documents/worksheets
Supporting engineering projects and improvement works
Servicing and maintaining machinery - TPM/PPM
Providing support to all departments across the site
Contributing to new working methods and participating in continuous improvement projects
Carrying out any other associated duties as required
Training:
Our apprenticeship programme combines college-based training, with work-based learning, under the mentorship of our highly skilled engineering team
From September 2025, the first 4 weeks of your apprenticeship will cover intensive training at The Grimsby Institute, Nuns Corner, DN34 5BQ. You will then work 3 days per week from Polypipe, Holmes Way, Horncastle, LN9 6JW, and return to The Grimsby Institute for 2 full days each week
In year 2, you will only attend college for 1 day each week, spending the majority of your time at our Horncastle site, learning and being mentored by our team of experts
You will complete a mixture of on and off the job training, including workshops, face to face training and working towards creating a portfolio of relevant practical evidence
You will have a review every 8-12 weeks with your Manager and Trainer to discuss your progress
Training Outcome:
The Polypipe Apprentice Programme provides a fantastic opportunity for apprentices to build a strong foundation of capability that will lead to a permanent job role, and possible internal progression
Employer Description:Polypipe Civils and Green Urbanisation is a UK leader in the design, development and manufacture of thermoplastic piping systems for major infrastructure and water management projects. From our dedicated site in Horncastle, we support a wide range of sectors including highways, rail, water, residential, commercial and agriculture.
We specialise in sustainable, engineered drainage and water management solutions, with in-house fabrication facilities and a skilled team delivering bespoke systems to meet the evolving needs of the built environment. Our expert teams work with advanced materials and innovative technologies to drive efficient, long-lasting solutions across the UK’s infrastructure network.
As an apprentice maintenance engineer, you’ll play a key role in supporting the equipment and systems that underpin our high-quality manufacturing processes.Working Hours :Monday - Friday, 08:00 - 16:30, whilst in apprenticeship training.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative,Positive 'can-do' attitude,Not afraid to ask questions,Highly driven individual,Self-starter....Read more...
About the Role: Rhames Ltd is seeking a motivated and detail-oriented individual to join our team as a Business Administration Apprentice. This is a fantastic opportunity for someone looking to develop essential administrative skills in all areas of the business while gaining valuable hands-on experience in a dynamic and growing engineering and manufacturing company.
As a Business Administration Apprentice, you will support various departments, helping to ensure the smooth operation of business functions while learning key administrative processes. This role is ideal for someone who is organised, eager to learn, and ready to contribute to a fast-paced work environment.
Duties may include:
Projects Division (specialising in turnkey project management and delivery)
Completing planning documentation (including H&S) and sharing with customers in preparation for site visits
Updating meeting minutes and distributing actions from them to the wider team
Creating/updating risk registers and project documentation in general being updated from meetings
Creating/updating programmes on Microsoft Project
Planning jobs on Rhames business management software for Rhames engineers attending site and ensuring parts are ordered and checked before the visits
Service Division (operations management, organising our service engineers and customer requirements)
Engineering deployment and communication
Work flow scheduling and operations planning
Risk assessment and permit submissions
Vehicle management and maintenance scheduling
Customer surveys/follow-up calls
Specialist tooling maintenance and KPI monitoring
Manufacturing & Workshop Division (Work undertaken within Rhames’ premises)
CAD Design and drawing
Stock and monthly reporting of Raw Materials, PPE and Consumables (Data Entry and Reporting)
Procurement & Supply Chain support
Job closure including documentation control
Assisting with Estimator in customer relations
Accounts Division (Finance department of Rhames)
Main business incoming telephone calls and general enquiries (Greeting visitors)
Purchase ledger activities (handling purchase invoices / statements)
Paperwork management (correct filing processes)
Processing purchase invoices / resolving purchase queries with suppliers
Updating business CRM and following processes to keep customers up to date
Assisting with new starter packs and induction process
Training:You are required to come into the City Hub campus 1x Monday a month to join the other apprentices.
You will be set work in this class to do over the month which will be marked and feedback given.
You will have one-to-ones every 4-6 weeks via Teams/and set tasks with the employer on Teams or face-to-face review.
Meetings will take place with the assessor and the employer every 12 weeks. This is also either face-to-face or via Teams.Training Outcome:Potential for a permanent role within the company upon successful completion of the apprenticeship.
Motivation to pursue professional certifications or additional training, such as achieving Chartered Engineer status or equivalent.
Interest in continued development within the field, with long-term career goals aligned with the company’s growth.Employer Description:Rhames Ltd are one of the UK’s leading electro mechanical specialist within the waste water, pharmaceutical and brewing industries. We deliver advanced engineering solutions & specialise in contract manufacturing, in-house design, and bespoke fabrication across various industries that drive growth and opportunity.Working Hours :Monday - Friday between 07:30 - 4:00 or 08:00 - 4:30.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
