An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
An opportunity has arisen for a Water Treatment Engineer with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Water Treatment Engineer, you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, pipework, boo....Read more...
An opportunity has arisen for a Service Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Service Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filter....Read more...
An opportunity has arisen for a Field Engineer (Water Systems) with 3 years of experience in construction or water sector to join a well-established provider of sustainable water management solutions, helping organisations reduce reliance on mains water through innovative systems and services.As a Field Engineer (Water Systems), you will install, commission and maintain water reuse systems, ensuring installations operate efficiently and deliver maximum benefit to end users. The position involves national travel with regular overnight stays (at least 3 nights a week).You will be responsible for:? Read and interpret technical drawings and wiring diagrams.
? Plan, coordinate and complete commissioning tasks to a high standard.
? Prepare system assessments and detailed reports with recommendations.
? Attend site visits to provide technical advice and guidance.
? Work in line with health & safety requirements and site RAMS.
? Carry out control panel upgrades and replacements.
? Service and repair booster pumps, booster sets, filters and pipework.
? Replace or repair pressure vessels, UV filtration units and bulbs.
? Diagnose and rectify electrical programme faults; upload programmes to Schneider and Crouzet PLCs.
? Perform pump programming, continuity and load testing, and safely isolate electrical supplies.
What we are looking for:? Previously worked as a Water Engineer, Water Treatment Engineer, Plant Engineer, Commissioning Engineer, Service Engineer, Field Engineer, Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer (with mechanical ), Mechanical Engineer (with electrical) or in a similar role.
? Proven experience as a Commissioning, Service or Pump Engineer, ideally with water, pump or building services systems.
? Level 3 Electrical Qualification (essential).
? Minimum 3 years' experience in construction, water, or a related engineering sector.
? Full UK driving licence.
Ideally experience with:
? Control panels, filters, p....Read more...
Graduate Engineer
Warwickshire
£28,000 - £34,000 + Technical Progression + Specialist Training + Industry Leading Pension + ‘Immediate Start’
Fantastic opportunity for a recent graduate engineer to join a company offering a career! Relish the chance to join a team who will progress your career technically and mould you into becoming a specialist within a niche sector of the engineering industry. On offer is full support from a great senior team and the chance to build a career.
This company is established and is renowned for the excellent services they provide. You’ll benefit from structured training and the opportunity to progress within the industry. This role is best suited for a Graduate Engineer looking for a role with great career prospects.
Your Role As A Graduate Engineer Will Include:
Supporting engineering design with the latest software
Working directly with customers to answer enquiries and deliver solutions
Collecting, analysing, and processing plant data to support product development and marketing
Creating and delivering technical papers, presentations, and materials for industry events
As A Graduate Engineer You Will Have:
A degree in Process, Chemical or Mechanical engineering
Enthusiasm to learn, explore, and grow in the heat transfer and process engineering industry
A proactive mindset and willingness to get hands-on in both technical and commercial aspects
Keywords: Mechanical Engineer, Heat Transfer, Thermal, Process, Mechanical Engineering, Graduate Engineer, Entry Level, Engineer, Energy, Warwickshire, Midlands, Worcester, Birmingham, Coventry ....Read more...
Graduate Engineer
Warwickshire
£28,000 - £34,000 + Technical Progression + Specialist Training + Industry Leading Pension + ‘Immediate Start’
Fantastic opportunity for a recent graduate engineer to join a company offering a career! Relish the chance to join a team who will progress your career technically and mould you into becoming a specialist within a niche sector of the engineering industry. On offer is full support from a great senior team and the chance to build a career.
This company is established and is renowned for the excellent services they provide. You’ll benefit from structured training and the opportunity to progress within the industry. This role is best suited for a Graduate Engineer looking for a role with great career prospects.
Your Role As A Graduate Engineer Will Include:
Supporting engineering design with the latest software
Working directly with customers to answer enquiries and deliver solutions
Collecting, analysing, and processing plant data to support product development and marketing
Creating and delivering technical papers, presentations, and materials for industry events
As A Graduate Engineer You Will Have:
A degree in Process, Chemical or Mechanical engineering
Enthusiasm to learn, explore, and grow in the heat transfer and process engineering industry
A proactive mindset and willingness to get hands-on in both technical and commercial aspects
Keywords: Mechanical Engineer, Heat Transfer, Thermal, Process, Mechanical Engineering, Graduate Engineer, Entry Level, Engineer, Energy, Warwickshire, Midlands, Worcester, Birmingham, Coventry....Read more...
Exciting Opportunity for a Mechanical Design Engineer at a Leading Utility Vehicles Manufacturing Company.
Join a dynamic and innovative utility vehicles manufacturing company as a Mechanical Design Engineer and make a significant impact on the development and success of cutting-edge products. We are seeking a highly skilled and motivated individual to be part of our growing team.
Responsibilities:
Collaborate with cross-functional teams to meet technical design, performance, and reliability requirements of the products.
Utilize advanced design software, such as Catia and ANSYS, to create and maintain detailed drawings and models.
Work closely with manufacturing teams to ensure efficient and cost-effective production of designs.
Conduct thorough analysis and testing to validate design integrity and optimize performance.
Keep up-to-date with industry trends and advancements to incorporate innovative design solutions.
Requirements:
Bachelor's degree in Mechanical Engineering or related field.
Strong proficiency in design software, including Catia and ANSYS.
Solid understanding of mechanical principles and engineering fundamentals
Excellent problem-solving skills and ability to work in a fast-paced environment....Read more...
Exciting Opportunity for a Mechanical Design Engineer at a Leading Utility Vehicles Manufacturing Company.
Join a dynamic and innovative utility vehicles manufacturing company as a Mechanical Design Engineer and make a significant impact on the development and success of cutting-edge products. We are seeking a highly skilled and motivated individual to be part of our growing team.
Responsibilities:
Collaborate with cross-functional teams to meet technical design, performance, and reliability requirements of the products.
Utilize advanced design software, such as Catia and ANSYS, to create and maintain detailed drawings and models.
Work closely with manufacturing teams to ensure efficient and cost-effective production of designs.
Conduct thorough analysis and testing to validate design integrity and optimize performance.
Keep up-to-date with industry trends and advancements to incorporate innovative design solutions.
Requirements:
Bachelor's degree in Mechanical Engineering or related field.
Strong proficiency in design software, including Catia and ANSYS.
Solid understanding of mechanical principles and engineering fundamentals
Excellent problem-solving skills and ability to work in a fast-paced environment....Read more...
Trainee Field Service Engineer
Shepperton
£26,000 - £28,000 Basic + (OTE £38,000) + Technical Training + Progression + Overtime + Call out + Bonus + Travel Paid + Company Vehicle + Fuel card + Personal use + Package
Grasp the opportunity to become a specialist in an industry as a trainee field service engineer where you will have full training to be the best in what you do. On offer is technical progression to develop your career long term whilst having the opportunity to earn well through overtime , paid at a premium rate! This company operates in the leisure industry and is true industry leaders in the sector. Due to continued growth, they require an additional Trainee Field Service Engineer to come and join their tight knit team and help contribute to their consistent workload. Secure a long term career now where you have full training in the sector and overtime opportunities to earn around £38,000 in your first year! The Role As a Trainee Field Service Engineer will include: *Full Training * Hands - On Trainee Field Service Role - Covering The London Areas & Occasional Commute Into The Office * Reactive Maintenance and Services Of Commercial Swimming Pools The Successful Field Service Engineer Will Have: * Background Experience With Hand Tools / Construction / PipeWorks / Plumbing* A Full Driving Licence * Happy To Cover The M25 AreaApply now or call Rebecka on 0745816304 for IMMEDIATE consideration. Key words: Field Service Engineer, Trainee engineer, Trainee Service engineer, pool engineer, pool technician,hot tub technician ,hot tub engineer,field service technician, Swimming pool engineer, swimming pool technician, leisure technician , leisure engineer, pool leisure engineer, maintenance engineer, leisure maintenance engineer, swimming pool maintenance, Service Engineer, Trainee Pool Engineer, Field Engineer, Electrical, Electrical Engineer, Mechanical Engineer, Mechanical, Electro mechanical, Pump engineer,UV System Engineer,Pumps,Valves, filter systems, customer service engineer, Plumber, pipework,construction,Slough,London,M25Windsor,Hayes,Southall,Houndslow,Uxbridge,Maidenhead,Marlow,Cookham,Harrow,Wermbley,Twickenham,Sutton,Croydon,Enfield,Edmonton,Tottenham Hale,Cheshunt,Ponders end,Woking,Guildford,Epsom,North London,South London,West London,SouthWest London,North West London,Feltham,Staines Upon Thames,Virginia Water, Chertstey,Chobham,Weybridge,Shepperton,Camberley,BracknellWatford,Ilford,W,Richmond,Romford,Essex,Brentwood,Brentford,Richmond,England,Esher,WestByfleet,Ocshott,Cobham This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants; however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted....Read more...
An Opportunity Has Arisen for a Field Service Engineer (Door Security Systems) to join a well-established company specialising in the design, manufacturing, and installation of high-quality physical security and entrance-control solutions.
As a Field Service Engineer, you will be providing expert service, maintenance, and repair of specialist security and access equipment across client sites.
This is an on-field role offering a salary range of £35,000 - £37,000 and benefits. You will not be required to take part in on-call duties but expect to work overtime.
You Will Be Responsible For:
? You will act as the main contact for all technical service duties, covering upkeep, restoration, setup, and issue resolution.
? Carrying out planned maintenance, repair, and troubleshooting of mechanical and electrical systems
? Maintaining accurate service records and job updates via mobile devices
? Managing van stock efficiently and ensuring all tools and materials are available for assigned work
? Ensuring work is completed to the highest safety and quality standards
? Supporting colleagues in the field when required
? Providing excellent service to customers and representing the company professionally at all times
What We Are Looking For:
? Previously worked as a Field Service Technician, Field Service Engineer, Field Engineer, Field Technician, Maintenance Engineer, Maintenance Technician, Service Technician, Service Engineer, Installation Engineer, Automatic Door Engineer, Roller Shutter Engineer, Industrial Door Engineer, Door Engineer or in a similar role.
? Prior field service experience preferably in mechanical or electrical environment.
? Ideally have experience with roller shutters and automatic doors
? Skilled in diagnosing faults and carrying out equipment repairs
? Confident using tablets or mobile devices for job management
? Full UK driving licence
What's on offer:
? Competitive Salary
? Overtime opportunities.
? Paid tr....Read more...
Trainee Field Service Engineer Nottingham £35,000 - £37-000 (OTE £42,000) + Training + Optional Overtime + Van + Company Bonus + No Weekends + No Call Out
Do you have an electro-mechanical background looking to join a growing, family-oriented company that will provide you with the training necessary to become a fully skilled engineer. This is a fantastic opportunity to receive full in-house training on bespoke manual handling equipment, best of all, there’s no call-out rota and no weekend work, giving you a great work-life balance. In this role as a Trainee field service engineer, you’ll travel to customer sites across a small local patch, carrying out service and maintenance on specialist equipment. You’ll be joining a supportive, close-knit team within a company that prides itself on its staff retention. This position would suit a mechanically minded individual, whether experienced or in the early stages of your career, who’s looking for hands-on training, career growth, and a chance to be part of a business that values its people.
Your Role as a Trainee Field Service Engineer Will Include:
Carrying out planned and reactive maintenance on material handling equipment
Full Training provided
Mondays - Fridays 39 hours per week (7:30-16:00 Monday – Friday)
You Will Need to Have:
NVQ Level 3 in engineering (or relevant experience)
Electro Mechanical background
Full UK Drivers' License
Trainee Electromechanical Field Service Engineer, Material Handling Equipment, Heavy Plant Machinery, Forklifts, Pallet Trucks, Conveyors, Hydraulic Systems, Pneumatic Systems, Mechanical Maintenance, Electrical Maintenance
....Read more...
Trainee Field Service Engineer
Wakefield£28,000 - £35,000 Basic + (£42,000 OTE) + Overtime + Bonus + Technical Training + Development + Career Progression + Holiday + Pension + Immediate StartKick-start your career as a Trainee Field Service Engineer and earn up to £42,000 in your first year through overtime, hands-on training, and progression to a fully fledged professional. This is a rare opportunity to join one of the UK’s leading specialists in advanced hydraulic systems, where you’ll gain practical experience, travel across the country, and develop your skills through structured training and real-world projects. Secure this opportunity now and benefit from a fantastic package!
This company designs, manufactures, and supplies precision hydraulic engineering systems and provides components such as cylinders, pumps, motors, and valves. As an established and expanding manufacturer, they’re now looking to invest in an additional Trainee Field Service Engineer. Take advantage of excellent training, strong earning potential through overtime, and the opportunity to build a long-term career with a business that genuinely values your growth. If you’re eager to learn and develop, apply now!
The Role of the Trainee Field Service Engineer Will Include:
Repairing, servicing, and maintaining hydraulic equipment
Liaising with new and existing clients
Hybrid field service role with some workshop-based work
Full UK driving licence required
The Successful Trainee Field Service Engineer Will Have:
Experience or training in any mechanical engineering principle
Electrical understanding (preferred)
Full UK driving licence
Abiloty To Commute To The Wakefield Area
For immediate consideration please call Becka on 07458163042 or click to apply
Keywords: trainee, engineer, trainee engineer, trainee field service engineer, mechanical engineer, hydraulics engineer, pumps, hoses, pneumatics, conveyor systems, mechanical, mechanics, mechanical engineering, control valves, hydraulic cylinders, workshop engineer, Leeds, Ossett, Huddersfield, Wakefield, Harrogate, Sheffield, Bradford, Castleford, BarnsleyFuture Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
An opportunity has arisen for aHeating Engineer / Gas Engineer to join a reputable facilities management and building services provider, recognised for delivering reliable and compliant mechanical and electrical solutions.
As a Heating Engineer / Gas Engineer, you will be carrying out a variety of planned and reactive maintenance tasks across multiple commercial and domestic sites, ensuring all work is delivered safely and to high standards.
This full-time permanent role offers a salary of Up to £50,000 plus overtime, on-call allowance and benefits. Must have all Gas Certificates / Qualifications as the majority of work is within Schools, Hospitals, MOD sites, Local Authorities etc.
You will be responsible for:
* Undertaking plumbing, heating and gas maintenance, installations and repairs
* Delivering planned preventative maintenance (PPM) and reactive works across client sites
* Diagnosing faults and carrying out remedial works on a range of commercial systems
* Installing pipework, valves, water heaters, and other plumbing equipment
* Commissioning and testing hot water and heating systems to ensure compliance
* Supporting refurbishment projects such as washroom or catering area upgrades
* Maintaining accurate digital records of all completed works
* Working closely with other mechanical and electrical teams to deliver integrated solutions
What we are looking for
* Previously worked as a Gas Engineer, Commercial Gas Engineer, Plumbing and Heating Engineer, Gas Service Engineer, Heating Engineer, Gas and Heating Engineer, Gas Safe Engineer, Plumber, Plumbing Engineer or in a similar role.
* Have at least 2 years of experience
* Ideally have experience in both Gas & plumbing
* NVQ Level 2 or 3 in Plumbing or a related Mechanical discipline
* Current Commercial and Domestic Gas Certifications (CCN1, CENWAT, CODNCO1, CDGA1, CIGA1)
* G3 certification for Unvented Hot Water Systems
* Awareness (or competence) in Electrical Safety
* Full UK Driving Licence
What's on offer
* Competitive salary
* Overtime and call-out pay enhancements (including door-to-door payment for weekend call-outs)
* Company vehicle, mobile phone and tablet
* 22 days annual leave plus Bank Holidays
* Company pension scheme
* Private healthcare option
* Ongoing training and career development
* Friendly, supportive working environment with regular social events
This is a fantastic opportunity to join a respected organisation offering stability, variety and long-term progression.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
The Maintenance Engineer vacancy is working with a market leading manufacturing firm based in the Knottingley area. The position offers excellent opportunities for both training and career development. Working Monday-Friday across Plant, PPM and Reactive maintenance Functions.What's in it for your as a Maintenance Engineer:
Monday-Friday 40-48 hours per week - based on a rotational 3 shift pattern of 8-hour days, afternoons and nights.
Salary - up to £52,500 per annum for 48 hours
Overtime at 1.5x
Service Bonus
KPI Bonus
Excellent pension company contribution, plus employee benefits package
Training and career development opportunities
30 days holiday (Increasing by 1 each year up to finishing at 36 days holiday) Inclusive of Bank Holidays
Main Duties & Responsibilities of Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
Maintenance Engineer experience or qualifications of a Maintenance Engineer
This position would suit a Multi Skilled Maintenance Engineer, Electrical Engineer, Mechanical Engineer, Maintenance Engineer or Shift Maintenance Engineer.....Read more...
We are seeking a Maintenance Mechanical Engineer to join a market-leading international manufacturing organisation based near the area of Hastings. The business can offer you extensive training, development and progression opportunities, including cross-skilling and upskilling, plus excellent career prospects following significant investment and future site development, securing the long-term future of the factory. What’s in it for you:
Salary of £49k per annum, plus overtime at a premium
Employee benefits programme, including a wide range of personal perks, plus share option scheme & pension matched up to 10%
Training and career development, including health and safety training, management training (ILM), and cross-skilling opportunities
Job security and personal development within a market-leading, international manufacturing organisation
The ability to work within a skilled team of engineers on a permanent basis
Hours of work – Days and Nights, 6am–6pm, 6pm–6am, 4 days on, 4 off, 4 nights on, 4 off shift pattern
Roles and Responsibilities of the Maintenance Mechanical Engineer:
Responsible for plant-wide proactive and reactive mechanical maintenance to ensure optimum performance of all equipment
Work with the Engineering team to ensure delivery of Company, Factory and Team plans
Carry out Planned Preventative Maintenance, inspections, servicing, and mechanical repairs
Respond to and resolve breakdowns and mechanical issues quickly to minimise downtime
Support continuous improvement initiatives and contribute to equipment reliability strategies
To Be Successful:
You will need to hold one of the following qualifications to be considered: City and Guilds Level 3, NVQ Level 3 and BTEC (Apprenticeship) in Mechanical Engineering
Strong mechanical background with proven experience as a Maintenance Engineer in a manufacturing or industrial environment
Experience in both planned and reactive mechanical maintenance
Knowledge of hydraulics, pneumatics, bearings, pumps, gearboxes, belts, and chains is highly desirable
Basic understanding of electrical fault finding and PLCs would be an advantage but is not essential
In return, you will be offered a truly varied role within a dynamic and fast-paced business where opportunities to develop your skills and progress your career frequently arise.....Read more...
Field Service Engineer Redhill £43,338 Basic (£50,000 – £60,000 OTE) + Company Van + Pension + Mobile Phone + Fuel Card + Immediate Start + Extensive Training + Flexible Working HoursAre you a Field Service Engineer looking to join a growing, prosperous company where your skills are valued and career progression is real? This is an exciting opportunity to work for a market-leading supplier, installer, and maintainer of pumps and associated equipment for both clean and wastewater applications across the South East of England. With projects ranging from factories, hospitals, and data centres to housing associations and office blocks, no two days are the same.Join as a Field Service Engineer and be part of a tight-knit engineering team where you can grow and develop your skills and a specialist industry. With all major tools and equipment supplied, a company van, fuel card, and ongoing training, you’ll enjoy a fully supported role where career progression and technical development are actively encouraged.Your Role as a Field Service Engineer:
Service, maintain, and install pumps and associated equipment across clean and wastewater sectors
Work on a variety of client sites, primarily within the M25 and home counties, with occasional further travel
Work alongside senior engineers and utilise in-house training and hands-on academy resources
The Successful Field Service Engineer Will Have:
Strong mechanical and electrical knowledge (electromechanical)
Prior service and maintenance experience
Pump engineering experience is highly desirable
Pump Engineer, Service Engineer, Field Service Engineer, Installation Engineer, Maintenance Engineer, Electromechanical Engineer, Mechanical & Electrical Engineer, Pump Engineer, Technical Service Engineer, Site Engineer....Read more...
An Opportunity Has Arisen for a Field Service Technician (Door Security Systems) to join a well-established company specialising in the design, manufacturing, and installation of high-quality physical security and entrance-control solutions.
As a Field Service Technician, you will be providing expert service, maintenance, and repair of specialist security and access equipment across client sites.
This is an on-field role offering a salary range of £35,000 - £37,000 and benefits. You will not be required to take part in on-call duties but expect to work overtime.
You Will Be Responsible For:
? You will act as the main contact for all technical service duties, covering upkeep, restoration, setup, and issue resolution.
? Carrying out planned maintenance, repair, and troubleshooting of mechanical and electrical systems
? Maintaining accurate service records and job updates via mobile devices
? Managing van stock efficiently and ensuring all tools and materials are available for assigned work
? Ensuring work is completed to the highest safety and quality standards
? Supporting colleagues in the field when required
? Providing excellent service to customers and representing the company professionally at all times
What We Are Looking For:
? Previously worked as a Field Service Technician, Field Service Engineer, Field Engineer, Field Technician, Maintenance Engineer, Maintenance Technician, Service Technician, Service Engineer, Installation Engineer, Automatic Door Engineer, Roller Shutter Engineer, Industrial Door Engineer, Door Engineer or in a similar role.
? Prior field service experience preferably in mechanical or electrical environment.
? Ideally have experience with roller shutters and automatic doors
? Skilled in diagnosing faults and carrying out equipment repairs
? Confident using tablets or mobile devices for job management
? Full UK driving licence
What's on offer:
? Competitive Salary
? Overtime opportunities.
? Pai....Read more...
The Job
The Company:
The opportunity to join a fast-growing leading distributor and supplier of mechanical and electrical instrumentation equipment.
Fantastic company culture based on providing quality service to customers.
Excellent opportunities for growth.
The Role of the Internal Sales Engineer
As the Internal Sales Engineer, you will be joining a hard-working and dedicated team who focus on providing their customers with fast, accurate and professional service.
You will respond to enquiries, handle quotations, manage projects and liaise with customers and other teams within the business.
You will provide a solution to customers rather than just sell a product.
You will work to maintain maximum profitability and growth.
Benefits of the Internal Sales Engineer
£28,000 - £45,000 DOE
£32,000 - £50,000 OTE
Annual Leave
Pension
The Ideal Person for the Internal Sales Engineer
You will have proven experience and a good track record within internal and technical sales.
Ideally experience selling to OEMs in Oil and Gas, Petrochemical, Pharmaceutical, Food and Beverage and Process industries.
You will have experience with mechanical or electrical instrumentation equipment or at least relevant mechanical equipment such as valves and pipework.
You will be a hard working, enthusiastic, and ambitious person who works well within a team.
You will have hunger and drive to do well in sales as there are opportunities for progression.
If you think the role of Internal Sales Engineer is for you, apply now!
Consultant: Josh Cumming
Email: joshuac@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
With a purpose-built factory and a reputation as a market leader in their field, our client specialises in bespoke products for a wide range of industries.We are currently recruiting for Multi-Skilled Engineer to join a growing manufacturing organisation.This is an excellent opportunity to work on technically challenging and rewarding projects within a clean and modern environment.The company is based in Huddersfield, offering easy access from surrounding towns and cities, such as Wakefield, Bradford. Leeds, Dewsbury and Batley.Key Responsibilities of the Multi-Skilled Engineer:
Be responsible for the correct electrical and mechanical assembly.
Carry out electrical and mechanical fit out processes.
Pre delivery inspection, factory acceptance testing.
Take ownership of pre delivery documentation.
Carry out site installation work as and when required.
Minimum Experience/ Skills Required:
City and Guild Electrical Installation.
City and Guild 17th Edition.
Mechanical fitting experience.
Comfortable with working on site.
Previous experience working with HVAC systems.
Working hours of the Multi-Skilled Engineer:
Monday to Thursday: 07:00-16:00
Friday: 07:00-11:45
In Return, the Multi-Skilled Engineer Will Receive:
Basic Salary: £40,000 (Dependant on Experience)
Early finish on a Friday
Regular overtime paid at premium (time and a half)
24 days holiday per annum (increasing with length in service)
Company pension scheme. (employer 5%, employee 3%)
If you are interested in the Multi-Skilled Engineer position, please click “apply now and upload your most up to date CV.....Read more...
Mechanical Fitter Near Heckmondwike | Circa £15 an hr + Overtime (OTE up to you!) Days: Monday – Friday 40hrsThe Company This market-leading automotive engineering company that has experienced rapid growth and continues to secure long-term projects, with a full order book.
Significant investment has been made into the modern manufacturing facility, creating excellent working conditions with high-quality equipment. Due to ongoing success, they are now looking to add an experienced Fitter to their growing team.
The Role – Mechanical Fitter As a Mechanical Fitter, you’ll be responsible for:
Installing systems such as hydraulics, compressors, specialised systems and pneumatics.
Completing a variety of fitting tasks on specialist commercial and transport-related vehicles
We’d love to hear from you if you have experience as a:
Plant Fitter
Hydraulic or Compressor Engineer
Mechanical / Forklift Truck Engineer
Light Vehicle Technician
Mechanical Fitter
Or similar vehicle fitting background
What’s on Offer for the Mechanical Fitter:
Salary: £15 an hr DOE
Overtime available at x1.5 – OTE completely in your control
Standard Days: Monday – Friday
Modern workshop with first-class facilities
Free onsite parking
Permanent position with a secure and growing employer
If you are interested in this Mechanical Fitter role, please apply now or contact Grace at E3 Recruitment....Read more...
