Electrical Maintenance Engineer - High-End Residential - FM Service Provider - Battersea - Up to £50,000An exciting opportunity to join an established building services company based in Battersea has arisen! CBW Staffing Solutions is currently recruiting for an Electrical Maintenance Engineer to be based on a high-end residential site located right by Battersea. He or she will be required to carry out PPMs and reactive building maintenance to both electrical and mechanical systems on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical, Mechanical & general building maintenance. In return, the company is offering a competitive salary of up to £50,000, overtime, further training, and a potential route into further career progression. Hours of workMonday to Friday8:00 am to 17:00 pmNo CalloutKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageUp to £50,00025 days holiday + Bank holidaysFurther trainingCompany pensionRequirementsElectrically qualified - City & Guilds Level 2&3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity, please send your CV to Archie Reed of CBW Staffing Solutions for more information.....Read more...
Electrical Maintenance Engineer - High-End Residential - FM Service Provider - Battersea - Up to £50,000An exciting opportunity to join an established building services company based in Battersea has arisen! CBW Staffing Solutions is currently recruiting for an Electrical Maintenance Engineer to be based on a high-end residential site located right by Battersea. He or she will be required to carry out PPMs and reactive building maintenance to both electrical and mechanical systems on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical, Mechanical & general building maintenance. In return, the company is offering a competitive salary of up to £50,000, overtime, further training, and a potential route into further career progression. Hours of workMonday to Friday8:00 am to 17:00 pmNo CalloutKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageUp to £50,00025 days holiday + Bank holidaysFurther trainingCompany pensionRequirementsElectrically qualified - City & Guilds Level 2&3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity, please send your CV to Charlie Long of CBW Staffing Solutions for more information.....Read more...
Maintenance Engineer- Continental Shift - Commercial building - Battersea - Temp to perm - up to £21p/hMy client is looking for a Shift Maintenance Engineer to be based in a commercial building In Battersea. The successful candidates will be Mechanically / Electrically biased (C&G / NVQ 2 or 3). Working with the maintenance team on site, He or she will be required to carry out General building maintenance in a commercial environment. In return, the company are offering an hourly rate of £20-21p/h. Hours of work & Salary £20-21p/h ( paid via umbrella )Continental Shift - 07:00 am-19:00 pm / 19:00 pm -07:00 amOvertime AvailableSalary £38k - £40p/h Key Duties & ResponsibilitiesAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)RequirementsExperience working in a large commercial building, willing to learnMaintenance experience not necessary as training can be provided.DBS required Mechanical or Electrical qualifications ( NVQ 2 or 3 / C&G )You must be able to provide copies of your trade certificates (Essential)Prior experience working in commercial building maintenance advantageousGood communication skillsExcellent customer skills Must be able to get to site for 07:00am startAvailability for a teams call prior to starting If you are interested please email your CV to Cammie@cbwstaffingsolutions.com ....Read more...
Sales Engineer required to deliver high value precision engineered capital equipment across a geographic region. You will managing key accounts, drive sales and successfully close deals.
Requirements
Track record selling high value custom precision engineered products.
Bachelor's degree in Engineering (MBA preferred).
Experience with mechanical precision engineered capital equipment and contract negotiations.
Frist class communication, and negotiation skills.
Responsibilities
Meet or exceed annual sales quotas.
Develop strategies and ensure effective execution.
Manage risks and collaborate with internal teams to mitigate exposure.
Provide forecasts, reports, and market insights.....Read more...
Electronic Instrumentation Engineer required to use their industrial engineering skills in PLCs, electrical motor drives, inverters, robots and automation systems to performance test propulsion systems.
The ideal candidate will have experience building, testing and modifying electronic modules including power, control and data acquisition devices. Control room and firing bay knowledge highly desirable but not essential.
Key skills
Electrical Engineering
Electro-mechanical
Power Systems or Power Electronics
Energy Storage Systems
Electrical Design
Schematics
Matlab
Simulink
AutoCAD
FineELEC (4M)
NEPLAN
Electrical Troubleshooting
Electrical Testing
On-board Diagnostics (OBD-II)
PSpice....Read more...
Electronic Instrumentation Engineer required to use their industrial engineering skills in PLCs, electrical motor drives, inverters, robots and automation systems to performance test propulsion systems.
The ideal candidate will have experience building, testing and modifying electronic modules including power, control and data acquisition devices. Control room and firing bay knowledge highly desirable but not essential.
Key skills
Electrical Engineering
Electro-mechanical
Power Systems or Power Electronics
Energy Storage Systems
Electrical Design
Schematics
Matlab
Simulink
AutoCAD
FineELEC (4M)
NEPLAN
Electrical Troubleshooting
Electrical Testing
On-board Diagnostics (OBD-II)
PSpice....Read more...
Senior Day Shift Engineer - Client Direct - Critical Banking Environment - London - £53,500 + bonus + AP Training 📍 About the Role: Exciting opportunity to work In House / Client Direct for a very well known financial institution in London. My client is looking for a Senior Day Shift Maintenance Engineer to be based across 2 critical / commercial buildings next to each other in London. The successful candidates will be electrically or mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, he or she will be required to carry out mechanical, electrical and fabric maintenance to the following. In return the company is offering a competitive package of £53,500 + 10% bonus + AP Training and £1,500 once training complete. 💼 What’s in it for you? £53,500 + 10% bonus£1,500 HV/LV or Mechanical AP payment1 in 7 call out + 2x hourly rate if called out Overtime available at 2x rate on weekdays and weekends (once AP training complete)HV/LV or Mechanical AP Training within 3-6 monthsPension contribution from employer (candidate does not have to contribute)26 shifts holidayPrivate Health Insurance Dental PlanInterest Free Season Ticket LoanLife insurance 4x salaryA lot of progression available 🕒 Working Hours: Day Shift (10 hour shifts)3 on, 1 off, 3 on, 3 off, 4 on, 7 off, 4 on, 3 off Later start on Saturdays & Sundays 🔧 Key Responsibilities: Ensure that Planned Preventative Maintenance & Reactive maintenance is carried out to all client assets through operation of Planned Preventative Maintenance System.Ensure that plant faults and defects are swiftly remedied to maintain the plant in serviceable order at all times.Ensure that suitable spares are available to carry out maintenance of the above plant.Ensure that comprehensive maintenance records are completed in the form of job sheets.Ensure that Method Statements and Risk Assessments are prepared, reviewed and utilized for all tasks (PPM and reactive) carried out to ensure safe working practices.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPumps, motorsBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractors ✅ Requirements: Electrically or Mechanically qualified Level 3 / HNC / HNDYou must be able to provide copies of your trade certificates (Essential)Will need to pass security clearance A proven track record in commercial building maintenanceAn understanding of critical plant: Chillers, HVAC, UPS systems, Cooling Towers etcExcellent customer skills Ideally multi skilled Highly desirable (Not essential) High Voltage - Experience / Qualification - Current 📩 Ready to Apply? Send your CV to Charlie@cbwstaffingsolutions.comOr call 0203 583 3099 and ask for Charlie to learn more! ....Read more...
Job Title: Senior or Principal Design Engineer Location: Sunbury-on-Thames, Surrey Salary: Up to £68,000 per annum (negotiable, dependant on experience) Benefits:25 days holiday plus bank holidays6% employer pension contributionPrivate healthcare / medical insuranceLife assurance (4× annual salary)Discounted goods and services schemeCycle-to-work schemeModern working environmentFriendly and supportive team with approachable managementContinued staff development and training opportunitiesOpportunity to work on innovative engineering solutions across global markets Company Profile This is a global technology group delivering advanced engineering solutions for aerospace, land-based systems, rail, and oil & gas sectors. The UK facility provides design, development, and support for a range of electro-mechanical products. Known for its strong focus on quality, innovation, and sustainability, the company offers employees the opportunity to contribute to meaningful projects while developing their careers in a collaborative, forward-looking environment. Job Profile As the successful Senior or Principle Design Engineer, you will work within the Sustaining Engineering team to support the ongoing production and in-service operation of products. You will be responsible for addressing product-related issues such as component obsolescence, yield performance, and long lead-time challenges, while also defining corrective actions and re-design proposals. The role involves close collaboration with Operations, engineering colleagues, suppliers, and customers to ensure continuity of supply and performance of existing products. Duties:Review, analyse, and validate product issues arising during production or in-service use across fans, heaters, motors, actuators, and air-conditioning systemsDefine corrective actions, component alternatives, or re-design solutions to address issues affecting delivery, yield, or performanceProvide hands-on support to production and test teams to resolve design-related challenges and capture performance dataAssist with in-service investigations, including occasional customer site visitsSupport supplier visits to address design, yield, or performance issues of sub-assemblies and componentsProduce and review engineering documentation such as drawings, specifications, reports, procedures, and change notificationsWork collaboratively within multidisciplinary teams to deliver Sustaining Engineering activitiesContribute to technical proposals, costings, and supporting documents for updates to legacy or in-service productsOperate within company procedures while suggesting improvements to maximise efficiency and meet customer requirements Skills & Attributes:Proven experience in mechanical design engineering, ideally within aerospace, automotive, rail, or related sectorsUnderstanding of electrical controllers containing relays and discrete electronic componentsStrong ability to interpret engineering drawings, technical documents, and specificationsExperience addressing component obsolescence, yield, or performance issues in production environmentsExcellent problem-solving skills with the ability to define corrective actions and re-design proposalsProficiency in producing high-standard engineering documents and change management processesStrong communication skills and the ability to collaborate across teams, suppliers, and customersWillingness to travel occasionally for customer and supplier visitsSelf-motivated, organised, and able to work under pressure Education / Certificates:Degree in Mechanical Engineering or a related discipline (or equivalent experience) Hours of Work:37.5 hours per weekMonday to Thursday: 07:30 – 16:00 or 08:00 – 16:30Friday: 07:30 – 13:00 or 08:00 – 13:30 Interested? This is an excellent opportunity for an experienced mechanical design engineer to take on a senior role in a global business. You will work on challenging sustaining engineering projects, help resolve complex in-service and production issues, and directly contribute to the long-term success of innovative products. With a competitive salary, excellent benefits, and a collaborative environment, this role is ideal for a motivated engineer looking to progress their career while making a real impact.Bolt-On Personnel and our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel.....Read more...
Seeking a skilled Senior Test Engineer with expertise in space propulsion. Responsible for overseeing firing site operations, including site preparation, maintenance, fuel and oxidizer handling, pressure systems.
Key Responsibilities
Design and manufacture of liquid propellant and high-pressure gas feed systems.
Advanced training provision in key operational skills on firing sites.
Proficient analysis and assessment of test data, producing high-quality analysis material.
Adherence to COMAH controlled testing standards.
Minimum Requirements:
Mechanical fitter or practical engineering skills
Ideally qualified to OU or equivalent graduate level course in engineering.
Level 4 training on the Skills and Competency Matrix with in-depth experience.
....Read more...
Junior or Graduate level Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control (relays, triacs, stepper motors, etc.) and user interfaces.
Technical Skills
8, 16 or 32 bit microcontrollers
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C
EMC compliance
Interaction of electro-mechanical products/mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design.....Read more...
An exciting opportunity in a consumer product manufacturing company based in Swansea as a Manufacturing Engineer reporting to Senior Manufacturing Engineer. You will be working alongside other engineers for the development and the improvement of all production line equipment in the manufacturing location.
Responsibilities include involvement with production team, assist in development of production line equipment, investigating and testing of production process.
Requirements
A degree in Mechanical, Electrical, Production or Manufacturing.
Knowledge Machine electrical Inputs/outputs.
Experience in Manufacturing environment.
Knowledge on NPI for electronic devices
Knowledge of PLCs and the ability to read ladder logic and structured text.....Read more...
An excellent opportunity in a consumer product manufacturing company based in Swansea as a Quality Engineer. You will be working closely with engineering, production and design teams to maintain and continuously improve the quality of the products and the processes.
Key responsibilities include quality assurance of new products, calibration system control, running regular audits of the quality system, investigation of the returned products, Documentation.
Requirements
HNC or HND in Electrical, Electronic or Mechanical Engineering.
Knowledge of ISO 13485.
Experience in quality improvement delivery in Electronic production environment.
Experience in the use of process flow control function....Read more...
Seeking a skilled Senior Test Engineer with expertise in space propulsion. Responsible for overseeing firing site operations, including site preparation, maintenance, fuel and oxidizer handling, pressure systems.
Key Responsibilities
Design and manufacture of liquid propellant and high-pressure gas feed systems.
Advanced training provision in key operational skills on firing sites.
Proficient analysis and assessment of test data, producing high-quality analysis material.
Adherence to COMAH controlled testing standards.
Minimum Requirements:
Mechanical fitter or practical engineering skills
Ideally qualified to OU or equivalent graduate level course in engineering.
Level 4 training on the Skills and Competency Matrix with in-depth experience.
....Read more...
Junior or Graduate level Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control (relays, triacs, stepper motors, etc.) and user interfaces.
Technical Skills
8, 16 or 32 bit microcontrollers
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C
EMC compliance
Interaction of electro-mechanical products/mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design.....Read more...
An exciting opportunity in a consumer product manufacturing company based in Swansea as a Manufacturing Engineer reporting to Senior Manufacturing Engineer. You will be working alongside other engineers for the development and the improvement of all production line equipment in the manufacturing location.
Responsibilities include involvement with production team, assist in development of production line equipment, investigating and testing of production process.
Requirements
A degree in Mechanical, Electrical, Production or Manufacturing.
Knowledge Machine electrical Inputs/outputs.
Experience in Manufacturing environment.
Knowledge on NPI for electronic devices
Knowledge of PLCs and the ability to read ladder logic and structured text.....Read more...
An excellent opportunity in a consumer product manufacturing company based in Swansea as a Quality Engineer. You will be working closely with engineering, production and design teams to maintain and continuously improve the quality of the products and the processes.
Key responsibilities include quality assurance of new products, calibration system control, running regular audits of the quality system, investigation of the returned products, Documentation.
Requirements
HNC or HND in Electrical, Electronic or Mechanical Engineering.
Knowledge of ISO 13485.
Experience in quality improvement delivery in Electronic production environment.
Experience in the use of process flow control function....Read more...
Electrical Assembly Technician Aberdeen £38,000 to £43,000 Private Healthcare + Overtime (OTE £65,000) + Full Training + Early Friday FinishAre you an experienced Electrical Technician looking to significantly boost your earnings? Join a well-established business that designs and builds large scale, precision driven machinery used in demanding industrial environments. This is a hands-on, permanent role where your electrical assembly skills will be put to use on complex, high value equipment alongside a strong pipeline of overtime to take your earnings well beyond £65,000.The company offers a clean, organised working environment with a close-knit team and ongoing investment in training. As an electrical assembly Technician you'll work on complete builds from the ground up with no repetitive production line tasks and get involved with every stage of the process from schematic interpretation to final testing. With overtime regularly available this is a great opportunity for those who want to take control of their earnings.Your Role Will Include
Building and wiring control panels and full electrical systems
Interpreting electrical diagrams and schematics
Installing and routing cable trays
Soldering, crimping, and terminating
Supporting integration with automated and mechanical systems
What You’ll Need
Apprentice served or qualified electrician status preferred
Ability to read and interpret wiring diagrams
Confidence with panel wiring, crimping, and related tasks
Monday to Thursday 8am to 5pm, Friday 8am to 2:30pm
Electrical assembly, Control panel wiring, Electrical systems integration, Electrical schematics, Wiring diagrams, Cable tray installation, Crimping and soldering, Electrical termination, Industrial equipment assembly, Mechanical and electrical integration, Electrical technician, Panel building, PLC panel wiring, Heavy machinery electrical systems, Electrical fault finding, Automation support, Electromechanical assembly, Wiring looms, Industrial control systems, Hands-on electrical build, Assembly technician, Technical drawings interpretation, Electrical build technician, Electrical manufacturing....Read more...
Package Engineer required a global Engineering & Manufacturing company, offering 75 years of experience as the supplier of choice to Oil and Gas, Rail, Mining and Energy industries.This organisation design and manufacture innovative technologies for Electrical infrastructures and are actively searching for an experience Package Engineer to join their 2,000 plus global workforce.The successful Package Engineer will be easily able to commute to BRADFORD from surrounding towns & cities, including Leeds, Dewsbury, Keighley, Pudsey, Halifax, Brighouse and Shipley.Key Responsibilities of the Package Engineer will include:
Support in the Engineering and Management of all technical matters relating to individual projects
Liaise with Project Managers, Estimating teams to ensure client requirements are understood and can be met
Participate in design reviews
Manage and verify documentation issued to clients and received from 3rd party suppliers
Ensure 3rd party suppliers adhere to quality standards, legislation and other regulatory requirements
Ensure projects are delivering on time and in accordance with project budgets
For the Package Engineer role, we are keen to receive CV’s from candidates who possess:
Experience as a Package Engineer or similar within an Engineering environment
Experience with technical mechanical or electrical products
Experience managing projects or packages commercially
HNC in Electrical Engineering or a Beng in Mechanical Engineering or similar
Ability to prioritise and manage multiple tasks simultaneously
Salary & Benefits:
£48,000 to £53,000 (depending on experience)
Attractive Pension
33 Days annual leave
Healthcare
Life assurance
Cycle to work scheme
Monday to Friday 8am – 4pm
To apply for the Package Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information.....Read more...
Field Service Engineer
Dublin
€45’000 - €55’000 + No Weekends + Holidays + Company Car/Van + Fuel Card + Medical Sector + Training + ‘ Immediate Start’
Are you a Field Service Engineer ready to take your career into a thriving and future-proof industry? This is a fantastic opportunity to make the leap into the medical sector and join a company offering exceptional job stability, career growth, and long-term security.
Join a rapidly expanding medical equipment service company that is setting the pace in the industry and consistently winning new contracts. You'll benefit from structured training, a supportive team environment, and a role that offers a great work-life balance—no weekend work required. This role is best suited for a Field Service Engineer with electro-mechanical skills looking for a positive change!
Your Role As A Field Service Engineer Will Include:
Field Service Role - Covering Ireland
Service, Maintenance & Repair of Medical Equipment
Customer Facing In Hospitals
As A Field Service Engineer You Will Have:
Electro-Mechanical Skill Set
Desire To Get Into The Medical Sector
Full Clean Driving License
Happy To Travel
Keywords: Field Service Engineer, Mobile Engineer, Field Technician, Coffee Engineer, Vending Engineer, ATM Engineer, Amusements Engineer, Forklift Engineer, Technician, Workshop Engineer, Medical Engineer, Dunlin, Ireland, Galway, Cork. ....Read more...
As an Accident Repair Technician, you will repair all elements of a vehicle after it has been involved in a collision
These range from small damage through to heavily impacted types of damage requiring complex and detailed repair or replacement of major structural elements of the vehicle
Typically, the Accident Repair Technician works in a modern, highly technical workshop-type environment, working on a broad range of vehicles from cars and car derived vans to light commercial vehicles
Uniquely, an Accident Repair Technician will work on and obtain a level of competence in all craft aspects of vehicle accident repair, including Mechanical, Electrical & Trim (MET); Panel Repair & Replacement; Preparation and Paint
The Accident Repair Technician from day one embraces the need to put complete customer satisfaction, as well as commercial awareness, at the centre of everything they do
The ability to excel whilst working within a task
Training:Training Provided:
Apprentices will work towards completing the Level 3 Accident Repair Technician apprenticeship programme which includes:
Vehicle accident repair– including Mechanical, Electrical & Trim (MET), Panel Repair & Replacement, Preparation and Paint, Hybrid / Electric Vehicle Level 2, F-Gas, Welding
Vella Group dedicated professional Technical Trainers who support with Apprentices development.
You may also be required to complete Functional Skills in English, Maths, and IT (dependent on previous or provisional GCSE qualifications or equivalent).Training Outcome:
A full-time position will be available on successful completion of the apprenticeship with future career development
Employer Description:The Vella Group Stoke, located in Fenton, is a long-standing and trusted repair centre. Specialising in vehicle repairs for major insurance companies, the team is dedicated to providing exceptional customer support across Stoke, Nantwich, Newcastle-under-Lyme, Stafford, and the surrounding areas.Working Hours :Monday- Friday
9:00am- 5:00pmSkills: Communication skills,Attention to detail,Organisation skills,Logical,Team working,Initiative....Read more...
As an Accident Repair Technician, you will repair all elements of a vehicle after it has been involved in a collision. These range from small damage through to heavily impacted types of damage requiring complex and detailed repair or replacement of major structural elements of the vehicle.
Typically, the Accident Repair Technician works in a modern, highlytechnical workshop-type environment, working on a broad range of vehicles from cars and car derived vans to light commercial vehicles.Uniquely, an Accident Repair Technician will work on and obtain a levelof competence in all craft aspects of vehicle accident repair, includingMechanical, Electrical & Trim (MET); Panel Repair & Replacement;Preparation and Paint.
The Accident Repair Technician from day one embraces the need to put complete customer satisfaction, as well as commercial awareness, at the centre of everything they do. The ability to excel whilst working within a team.Training:Training Provided: Apprentices will work towards completing the Level 3 Accident Repair Technician apprenticeship programme which includes:
Vehicle accident repair – including Mechanical, Electrical & Trim (MET), Panel Repair & Replacement, Preparation and Paint, Hybrid / Electric Vehicle Level 2, F-Gas, Welding. Vella Group dedicated professional Technical Trainers who support with Apprentices development. You may also be required to complete Functional Skills in English, Maths, and IT (dependent on previous or provisional GCSE qualifications or equivalent).Training Outcome:A full-time position will be available on successful completion of the apprenticeship with future career development.Employer Description:The Vella Group Leominster is an accident repair centre based in Leominster, Herefordshire, and repairs vehicles for all those in the surrounding areas.Here our fully trained and competent accident repair technicians will restore your vehicle to its pre-accident condition and get you back on the road safely and efficiently.Working Hours :Monday - Friday, 9:00am - 5:00pm.Skills: Communication skills,Attention to detail,Organisation skills,Logical,Team working,Initiative....Read more...
Junior Shift Engineer – Continental Shift – Commercial Building – Kings Cross, London – £32,000 Per annum Are you looking for a way into maintenance?Are you looking for a role in Central London?Are you electrically or mechanically qualified?If the answer is yes, then read on.... My client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in Kings Cross, London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the maintenance team on site, He or she will be required to carry out electrical, and mechanical maintenance. In return, the company offers a competitive salary of £32,000, further training and career progression. Package£32,000 per annumUniform and Tools ProvidedCycle to work scheme20 days holidayOvertime AvailablePensionInternal Progression & DevelopmentHours of workContinental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 3 or mechanically City & Guilds Level 2Have a hard-working attitudeWillingness to learnMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceGood communication skillsClient FacingIf you are interested please get in contact with Alex Denton of CBW Staffing solutions!....Read more...
Shift Leader – FM Service Provider – Kensington, West London – £60K + OvertimeAre you an experienced shift leader looking for a new and exciting challenge?Would you like the chance to work in one of the newest and most impressive venues in West London?If so, read on…A leading FM service provider is seeking a Shift Leader for one of their most prestigious contracts based in the Kensington area of West London.Applicants must have a proven track record in a commercial, critical, or banking environment and hold a recognised electrical or mechanical qualification.This role operates on a day and night shift pattern, so flexibility is essential. Candidates must have a solid understanding of all critical building services including UPS systems, generators, air conditioning, refrigeration, server rooms, lighting, and power.Key DutiesEnsure Planned Preventative Maintenance (PPM) & Reactive Maintenance is carried out on all client assets using the maintenance system.Manage the shift engineering team.Carry out hands-on maintenance work when required.Ensure plant faults are quickly resolved to maintain continuous operation.Perform regular quality checks on work activities, documentation, and housekeeping.Ensure suitable spares are available to support ongoing maintenance.Maintain accurate maintenance records and job sheets.Prepare, review, and use Method Statements and Risk Assessments for all tasks to ensure safe working practices.RequirementsFully qualified electrically or mechanically to a recognised standard.Proven experience in building maintenance within a critical site (commercial, blue-chip, or banking).Strong communication skills.Multi-skilled knowledge – mechanical/electrical including UPS, generators, and power distribution.Good leadership and management skills.HV Authorised – preferred.Enhanced DBS clearancePackage Includes£60,000 + overtime.22 days holiday + bank holidays.Company pension scheme.Private healthcare.Please send your CV to katie at CBW Staffing Solutions for more information.....Read more...
Assembly Technician required to perform manufacturing and testing activities in accordance with relevant processes and procedures to ensure all products are manufactured to the highest quality and conform with design specifications and standard.
Responsibilities:
Manufacture and assembly of all products
Perform Factory Acceptance Testing
Responsible for performing regular checks on equipment
Ensure good housekeeping within own work area
Forklift operations as and when required
Key skills:
Qualification in an engineering discipline (ONC, HNC or HND)
Good Mechanical Technician skills
Familiarity with electrical or sensor test equipment and operations
Basic to intermediate skills in MS Office products to include Word and Excel and MRP or related systems....Read more...
We are looking for a Senior Electronic Design Engineer to join development team in Oxford. Reporting to the Hardware Development Manager
Key Responsibilities
Electronic Design of a range of hardware products, calibration devices and synchronisation and networking equipment.
Working alongside, and sometimes leading, teams comprising of electronic, mechanical and software design engineers in the creation of high performing and cost effective solutions.
Key skills
Key requirements are high speed digital design, a working knowledge of analogue design and experience of developing products for manufacture with an emphasis on DFM/DFT.
A working knowledge of VHDL/FPGAs, image sensors, optics, Ethernet and RF Design would be advantageous.....Read more...
