As a Junior Wireline Engineer, you will play a vital role in the oil and gas industry, specifically in wireline operations. Working as part of a dynamic team, you will assist in the planning, preparation, and execution of wireline interventions and data acquisition services.
Key Responsibilities
Assist in the planning and preparation of wireline operations, including tool selection, equipment mobilization, and logistics coordination.
Assist in rigging up and rigging down wireline units, ensuring proper installation and securing of equipment.
Operate wireline tools and instruments under the supervision of senior engineers, adhering to standard operating procedures.
Participate in safety meetings and drills, reporting any potential hazards or incidents promptly.
Participate in training programs to enhance technical knowledge, operational skills, and
understanding of wireline tools and technologies.
Qualifications and Skills
Bachelor's degree in Petroleum Engineering, Mechanical Engineering, or a related field is preferred.
Knowledge of wireline operations, tools, and techniques is advantageous but not mandatory for a junior role.
Familiarity with oil and gas industry practices, safety standards, and regulatory requirements.....Read more...
As a Junior Wireline Engineer, you will play a vital role in the oil and gas industry, specifically in wireline operations. Working as part of a dynamic team, you will assist in the planning, preparation, and execution of wireline interventions and data acquisition services.
Key Responsibilities
Assist in the planning and preparation of wireline operations, including tool selection, equipment mobilization, and logistics coordination.
Assist in rigging up and rigging down wireline units, ensuring proper installation and securing of equipment.
Operate wireline tools and instruments under the supervision of senior engineers, adhering to standard operating procedures.
Participate in safety meetings and drills, reporting any potential hazards or incidents promptly.
Participate in training programs to enhance technical knowledge, operational skills, and
understanding of wireline tools and technologies.
Qualifications and Skills
Bachelor's degree in Petroleum Engineering, Mechanical Engineering, or a related field is preferred.
Knowledge of wireline operations, tools, and techniques is advantageous but not mandatory for a junior role.
Familiarity with oil and gas industry practices, safety standards, and regulatory requirements.....Read more...
Quality Engineer required for a global leader in high-performance products in the Oil & Gas sector. Operating for 50 years, this internationally recognised organisation operates in over 150 countries, supplying engineered solutions to some of the world’s most demanding industries. Due to continued growth, they are now recruiting for a Quality Engineer to join their team in Brighouse, West Yorkshire.
This opportunity is based in Brighouse, making it easily commutable from surrounding areas including Huddersfield, Halifax, Bradford, Wakefield, and Leeds.
Key Responsibilities of the Quality Engineer will include:
Supporting the Quality Manager in maintaining ISO 9001 Quality Management System (QMS)
Conducting internal system audits and managing corrective/preventative actions
Maintaining QMS procedures, reviewing effectiveness, and updating documentation
Assisting during 3rd Party/Client/LQRA audits and resolving non-conformances
Reviewing and creating Inspection Test Plans (ITPs)
For the role of Quality Engineer, we are keen to receive applications from individuals who have:
Lead/Internal Auditor certification for ISO9001:2015
Experience working in environments driven by technical specifications
Minimum 3 years’ experience in manufacturing, ideally within Oil & Gas
Strong communication skills across all levels
Logical and critical thinking for problem-solving
Planning and organisational skills
Technical knowledge of pressure-retaining material specifications
Salary & Benefits on offer for the Quality Engineer:
Competitive salary £34k - £40k DOE
33 days annual leave (including flexible, statutory, and end-of-year shutdown holidays)
pension scheme in line with automatic enrolment
Excellent working conditions in a modern manufacturing environment
To apply for the Quality Engineer position, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Lewis Lynch at E3 Recruitment for more information.....Read more...
The Company: NATIONAL JOB - FULLY REMOTE
A long-established engineering manufacturer with an international reputation for precision and reliability in valve technology.
Supplies bespoke valve solutions to the process, energy, and infrastructure sectors.
Benefits of the Area Business Manager
£50,000 - £65,000
Car Allowance
25 Days A/L + BH
Pension
Private Health Care
The Role of the Area Business Manager
Take ownership of sales and business development for the company’s valve products across the UK & EU.
Build and maintain strong relationships with engineering contractors, oil & gas companies, and industrial end users.
Identify new project opportunities and drive specification of the company’s valve solutions within key accounts.
Manage and support a network of regional agents to maximise sales coverage and effectiveness.
Work closely with internal teams to ensure customer satisfaction and timely project delivery.
Attend trade shows, seminars, and exhibitions to represent the brand and promote the full valve product range.
Develop territory-specific sales plans, forecasts, and performance reports to align with business targets.
Maintain a clear understanding of competitor activity and market trends within the valve and oil & gas sectors.
Deliver consistent growth by combining technical expertise with strong commercial awareness.
The Ideal Person for the Area Business Manager
Strong technical understanding of valves, including sizing and selection.
Must be happy to travel across the UK and Internationally.
Background in engineering sales, ideally within process or industrial markets.
Excellent presentation, planning, and organisational skills.
Confident communicator, capable of building long-term relationships.
Proficient in Microsoft Office (Word, Excel, PowerPoint).
Engineering qualification (Apprenticeship or Degree) with business training desirable.
If you think the role of Area Business Manager is for you, apply now!
Consultant: Joshua Cumming
Email: joshuac@otrsales.co.uk
Tel no.: 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical, and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director, across the UK and internationally.....Read more...
Global Sales & Distribution Manager required for a global leader in high-performance products for the Oil, Gas, Petrochemical, and Hydrogen sectors. Operating for 50 years, this internationally recognised organisation operates in over 150 countries, supplying engineered solutions to some of the world’s most demanding industries. Due to continued growth, they are now recruiting for a Global Sales & Distribution Manager to join their team in Brighouse, West Yorkshire.
This opportunity is based in Brighouse, making it easily commutable from surrounding areas including Huddersfield, Halifax, Bradford, Wakefield, and Leeds.
Key Responsibilities of the Global Sales & Distribution Manager will include:
Define a comprehensive multi-year selling strategy roadmap ensuring alignment with organizational goals.
Establishing and managing international distributors against pre-set targets across four product lines
Leveraging technical and mechanical engineering expertise to expand into global markets
Maintaining and managing a significant portfolio of global vendor approvals to influence end-user specifications
Building strong relationships with clients and partners to support business growth
Supporting commercial success across a diverse range of engineered valve products
For the role of Global Sales & Distribution Manager, we are keen to receive applications from individuals who have:
A proven track record in sales and marketing management, ideally within the oil and gas industry
Experience in sales and distribution management in the valve industry (preferred)
A background in mechanical engineering, including HNC qualifications and a traditional engineering apprenticeship
Strong communication and interpersonal skills, with the ability to work across cultures and geographies
Willingness to travel internationally as part of the role
Salary & Benefits on offer for the Global Sales & Distribution Manager:
Competitive salary – depending on experience
33 days annual leave (including flexible and statutory holidays)
Access to Health Care Cash Plan and Pension Scheme (post-probation)
Excellent working conditions in a modern manufacturing environment
To apply for the Global Sales & Distribution Manager position, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Lewis Lynch at E3 Recruitment for more information.....Read more...
Join a leading subsea engineering team delivering cutting-edge solutions for oil and gas projects focused on asset performance, energy efficiency, and emissions reduction.
Subsea Services Planner required to ensure the safe, efficient, and on time delivery of off shore mechanical and electrical engineering assets. The successful candidate will collaborate across departments to drive project readiness, monitor deliverables, and support engineering, manufacturing, and supply chain activities.
Requirements
Relevant subsea engineering background, ideally mechanical.
Strong understanding of technical drawings and project workflows.
Degree in Mechanical, Electrical, or related technical field.
Proficiency in Microsoft Office: SAP, CAD, and MS Project a plus.
Responsibilities
Track and optimize project schedules and deliverables.
Support risk analysis and continuous improvement initiatives.
Collaborate with engineering to ensure manufacturing readiness.
Analyze data to manage or inform business and planning decisions.....Read more...
Join a leading subsea engineering team delivering cutting-edge solutions for oil and gas projects focused on asset performance, energy efficiency, and emissions reduction.
Subsea Services Planner required to ensure the safe, efficient, and on time delivery of off shore mechanical and electrical engineering assets. The successful candidate will collaborate across departments to drive project readiness, monitor deliverables, and support engineering, manufacturing, and supply chain activities.
Requirements
Relevant subsea engineering background, ideally mechanical.
Strong understanding of technical drawings and project workflows.
Degree in Mechanical, Electrical, or related technical field.
Proficiency in Microsoft Office: SAP, CAD, and MS Project a plus.
Responsibilities
Track and optimize project schedules and deliverables.
Support risk analysis and continuous improvement initiatives.
Collaborate with engineering to ensure manufacturing readiness.
Analyze data to manage or inform business and planning decisions.....Read more...
Working alongside our tradesmen you will benefit and learn from their experience and skills and gain experience to perform practical in-house fabrication on a wide variety of steel fabrication products.
Duties will include:
Understand classification rules, welding procedures, material certification, reading and understanding technical drawings, weld symbols, establishing datums, material types and applicable sizes and dimensions
Develops layout and plans sequence of operations, establish correct consumables, utilising best equipment / machinery and workspace. Best methods of fabrication whilst asking support trades to carry out functions to support build methods
Provides information to buyers for the materials and consumables required to undertake tasks
Set up jigs, locate and marks bending / cutting lines onto part material pieces. Able to dimensional control take readings prior to building of a structure and continue to monitor structural movement and alignment throughout build process
Checks operability of equipment, setting guards and check for testing certs/tags on electrical equipment, cleaning out and removing redundant materials from machinery. Sets up and operates fabricating machines guillotine, flanger, press brake, roller, profile machine, over head cranes, portable equipment welding machines, MMA, MIG, TIG Miggy tracks, magnetic welding tracks, sub merged arc welding. Oxy/Propane/Acetylene flame cutters, setting up gauges, hose flash back arrestors, drilling machines, pipe cutters
Operating hand tools – hammers, chisels, grinders, theodolites, spirit levels, rules, measuring tapes, scribers, punches and centre dabs, hacksaws, files, clamps – sash, G clamp and fairing aids whilst using straps and slings for securing or lifting
The post holder may be required to perform duties other than those given in the job description. The particular duties and responsibilities attached to the post may vary from time to time without changing the general character of the duties or the level of responsibility entailedTraining:
The Level 3 Metal Fabricator Apprenticeship is primarily delivered in the workplace with 1 day a week college attendance for the three years
You will work towards gaining a Level 3 Metal Fabricator Apprenticeship Standard, as well as a Level 3 Diploma in Advanced Manufacturing Engineering (Development Knowledge)
Training Outcome:
Upon successful completion of your apprenticeship, you will continue employment with us
Employer Description:Established in 1979 BFS initially manufactured ships components such as Wheelhouses, A frames, propeller Nozzles and rudder stock assemblies.
Geographically located very close to the most Easterly point of the UK, the next step forward was the transition into the Oil & Gas industry.
Having accrued a reputation for quality products along with a loyal group of experienced personnel, BFS were awarded a contract to complete the hook-up of a new offshore platform. This involved the manufacture and installation of over 100 tonnes of structural steel and associated pipework. This project kick started the business development within the Oil Gas and petrochemical industries. To support this growth in 1987 BFS enrolled on the dti enterprise scheme to introduce a formal Quality Management System into the business. In 1992 BFS were accredited to BS5750 by Lloyds Register Quality Assurance (LRQA) and progressed seamlessly to the ISO 9001 standard. The company has recently integrated the Construction Products Regulations (CPR) EN 1090 CE marking into its Quality Management System.
Operating from a modern 23000 square foot manufacturing facility and coupled to a workforce with a subtle blend of experience and youth. The business is well placed to deliver its objectives of supplying a diverse range of quality products, on time, throughout the Oil Gas and Renewables industries.Working Hours :Monday - Thursday, 8.00am - 4.30pm and Friday, 8.00am - 3.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Full UK Driving Licence....Read more...
Field Services Engineer required to work on the installation, test, troubleshot and maintenance of switchgear for Marine, Industrial and Offshore clients, (some overseas travel as required). You will be joining an experienced, highly skilled and motivated team who ensure the safe execution of all Service Projects. The goal is to consistently provide customers with an excellent switchgear and ancillary equipment Servicing, Upgrade, Preventative maintenance and Life Extension from the workshop, customers site, offshore or marine.
Skills
Electrical switchgear operation, maintenance and fault finding.
Offshore or marine working.
Time served electrical engineering apprentice
ONC or equivalent in Electrical Engineering.
Protection relay testing, Air Circuit Breaker testing, Retrofits ACB's, MCCB's and Switches, Breaker servicing, Thermographic Survey, Partial Discharge testing, Oil Circuit Breake service and test, Asbestos Arc Chute replacement, Asbestos Fuseswitch Shroud replacement, and Off shore Service and Maintenance.
Responsibilities
Respond to customer enquiries for technical support, advice and future service offerings including quotations.
Safely perform Service related tasks such as.
Switchgear service and maintenance
Switchgear upgrades and life extension projects
Protection relay testing and upgrade.
Switchgear breakdown investigation and repair
Undertaking pre mobilisation duties, including but not limited to, Project Specific Risk Assessments, Method Statements, etc.....Read more...
Field Services Engineer required to work on the installation, test, troubleshot and maintenance of switchgear for Marine, Industrial and Offshore clients, (some overseas travel as required). You will be joining an experienced, highly skilled and motivated team who ensure the safe execution of all Service Projects. The goal is to consistently provide customers with an excellent switchgear and ancillary equipment Servicing, Upgrade, Preventative maintenance and Life Extension from the workshop, customers site, offshore or marine.
Skills
Electrical switchgear operation, maintenance and fault finding.
Offshore or marine working.
Time served electrical engineering apprentice
ONC or equivalent in Electrical Engineering.
Protection relay testing, Air Circuit Breaker testing, Retrofits ACB's, MCCB's and Switches, Breaker servicing, Thermographic Survey, Partial Discharge testing, Oil Circuit Breake service and test, Asbestos Arc Chute replacement, Asbestos Fuseswitch Shroud replacement, and Off shore Service and Maintenance.
Responsibilities
Respond to customer enquiries for technical support, advice and future service offerings including quotations.
Safely perform Service related tasks such as.
Switchgear service and maintenance
Switchgear upgrades and life extension projects
Protection relay testing and upgrade.
Switchgear breakdown investigation and repair
Undertaking pre mobilisation duties, including but not limited to, Project Specific Risk Assessments, Method Statements, etc.....Read more...
An innovative and sustainably focused fuel storage company with a global presence are looking for a skilled and experienced C&I Engineer to join their team in the South East region!
They are passionate about people and ensuring that the development of their employees is at the heart of everything that they do. They are focused on moving towards a more sustainable future within their global operations. Now is a great time to join their team as a C&I Engineer.
Salary and Benefits of the C&I Engineer
Annual Salary: Between £65,000 - £70,000
Annual Bonus Up to 10%
Company Vehicle
Flexible Working Opportunities
Pension Up to 9% Employer Contribution
38 Days Annual Leave (Inc. Bank Holidays)
Private Medical Insurance
Healthcare Cash Plan
Life Assurance Policy 5 x Annual Salary
Key Information on the C&I Engineer Role
With the role of C&I Engineer, you will travel the region of the South East in a field-based role to deliver key projects within the Oil & gas field, providing expertise knowledge and experience as a C&I Engineer.
You will be responsible for managing and maintaining all aspects of instrumentation and industrial Automation Control Systems. Including system upgrades, design, development and installation. The C&I Engineer will also provide technical support to the Maintenance, Operations and Project Teams.
Key Responsibilities
Field equipment and instrumentation selection/approval
Install and commission new elements to improve current C&I equipment and systems in line with project requirement
Maintain and improve existing SCADA systems to ensure performance improvement and efficiencies to operation
Understand process control issues and develop control solutions, working collaboratively with designers and operations
DCS/SCADA/PLC support and fault finding
Routine systems maintenance & support - backup, DR planning and testing, systems prognostic (system log analyses) and diagn
Analysing data and presenting findings in written reports
Review Software and Hardware designs (BPCS, DCS, SIS, PLC and SCADA) Preparation of handover work packs, commissioning procedures and on-site commissioning
Participate in C&I documentation reviews, P&ID reviews, HAZOPs and LOPAs, FATs and SAT
Essential Criteria needed of the C&I Engineer
Around 10 years of experience working in an industry-based role
Vast experience within the Oil & Gas industry under UK Regulations
Degree Qualified in a related or relevant field
Experience of working in High Hazard areas (COMAH, ATEX, DSEAR etc.)
Strong working knowledge of PLC and SCADA Systems
Extremely strong technical knowledge in the C&I field
How to apply?
Apply for this position direct by submitting your CV for review.
....Read more...
Position: CNC Miller Programmer - Nights
Location: Tamworth
Salary: £40,000 - £52,000 p.a
Hours: Monday to Thursday, 10-hour night shift (40 hours per week)
About the Role Were looking for a CNC Miller to join a precision engineering company producing complex, high-quality components for industries such as aerospace, motorsport, automotive, and oil & gas.
Youll be responsible for programming, setting, and operating 3, 4, and 5-axis CNC milling machines, ensuring all components are manufactured to tight tolerances within a modern, well-equipped workshop.
Key Responsibilities
- Program, set and operate CNC milling machines using Heidenhain and/or Fanuc controls
- Use EdgeCAM or Fusion 360 (other CAM systems considered)
- Adjust offsets, prove programs, and correct machining errors
- Work across multiple machines to meet production and quality targets
- Support continuous improvement and maintain a safe, organised workspace
Requirements
- Apprenticeship-trained or qualified by experience
- Skilled in Heidenhain or Fanuc programming and precision machining
- Experience using CAD/CAM software (EdgeCAM, Fusion 360 or similar)
- Able to read and interpret complex engineering drawings
- Strong attention to detail and self-motivated work ethic
If youre a skilled CNC Miller looking for a secure night shift role, click Apply or contact Kate Taylor at kate@holtengineering.co.uk....Read more...
Assist senior engineer with plumbing and heating installations
Clean pipe and fittings
Cut pipework to assist engineer
Hang radiators
Hang bracketery
Insight to Air Source Heat Pumps
Assist with installing boilers (Oil and Gas)
Training:Plumbing and Domestic Heating Technician Level 3 Apprenticeship Standard:
On site practical training alongside Senior Engineer. 1 day a week at College
Assessor visits to workplace
Coursework and skill portfolio submitted via online learning platform
Training Outcome:
To become an independent and valuable Engineer to Shires Building Services
Employer Description:Shires Building Services Ltd is a family run mechanical plumbing and heating company located in Westbury, Wiltshire.
Shires was established in 1994 and is committed to designing the most economical plumbing and heating systems for your home or property. We offer a comprehensive service right from the offset with a full in-depth technical design right through to the completed installation.Working Hours :On Site hours 8.00am - 4.30pm. 30minute unpaid break. Travel time included in pay .Skills: Customer care skills,Problem solving skills,Punctual,Efficient....Read more...
Assist experienced mechanics with routine maintenance and vehicle repairs
Learn to diagnose and troubleshoot mechanical faults using diagnostic tools and equipment
Carry out basic maintenance tasks such as oil changes, tyre rotations, and brake inspections
Maintain a clean, safe, and organised workspace
Follow all health and safety procedures at all times
Communicate effectively with colleagues and customers to ensure quality service
Training:
Motor Vehicle Service and Maintenance Technician - Light Vehicle Level 3
4-days per week at Bedlington MOT
1-day per week at Newcastle College
Training Outcome:Upon successful completion of the apprenticeship, there is the opportunity to progress into a full-time permanent position with the garage.Employer Description:We are seeking a motivated and enthusiastic Apprentice Mechanic to join our team and develop their skills in a supportive and dynamic environment.Working Hours :Monday - Thursday: 9:00am - 5:30pm
Friday: 9:00am - 5:00pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
An opportunity for a Grinder to work 2 x shifts for a Global Business, that manufacture engineering products for the oil & gas, power generation and aerospace & defence markets.
Our client has already engaged in the delivery of a wide range of high-profile projects and on the back of this they have been recently awarded another major contract and thus are looking to add a Grinder on a Permanent Contract.
Our Global Client is backed by extensive years of innovation and extensive research from design to production. DUTIES for the role of Grinder :
Production duties including machining and grinding of parts.
Operating Manual Surface Grinders, Horizontal Borers and Lathes.
Maintain target levels of productivity.
Maintain equipment in good condition.
KEEN to speak to Grinders :
Experience of machining and grinding operations.
Ability to read engineering drawings.
Experience in fitting and assembly.
Experience in basic machine maintenance.
Experience in the use of lifting equipment, including slinging and use of overhead Crane.
THE offer for the role of Grinder :
Salary dependent upon experience £30,000 - £35,000 per Annum .
Great Company Pension -up to 10% Employer Contribution.
Medical Cover /Life Insurance.
Max 36 days holiday.
....Read more...
Daily tasks will include:
Setting up and running machines
Inspecting finished products using standard and state-of-the-art measuring equipment, and adhering to safety protocols.
The role requires the ability to read and interpret technical drawings and specifications, as well as troubleshooting and working on your own initiative.
Training Outcome:To be a full-time, fully qualified, CNC Cutter Grinder.Employer Description:ITC, Industrial Tooling Corporation Ltd (ITC) is a round tool specialist dedicated to providing customers with the precise cutting tools they need, exactly when they need them. Our state-of-the-art production facility in Tamworth features advanced CNC grinding machines and a centralized oil filtration system to ensure optimal conditions. ITC prides itself on holding over 100,000 HSS Co and Solid Carbide tools ready for immediate dispatch, and we offer a fast modification service and bespoke manufacturing solution for quick-turnaround requests. Our commitment to excellence has made ITC a trusted partner for manufacturing companies both in the UK and abroad seeking reliable solutions for their tooling needs.Working Hours :Monday – Thursday : 9.00am – 5.00pm.
Friday 8.30am – 4.30pm.
Half an hour lunchbreak daily.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Logical,Team working,Initiative,Troubleshooting....Read more...
Technical Sales Engineer Leeds
£35,000-£55,000 + Bonus (Additional £2000-£3000 Paid Annually) + ‘IMMEDIATE START’
Are you a Technical Sales Engineer looking to join a UK specialist in ABB motors, drives, and systems? Your role as Technical Sales Engineer is designed to showcase a trusted brand to customers across the petrochemical, oil & gas, water, power, and chemical industries. With a turnover of £12m+ alongside a reputation as market leaders, this is a great opportunity to join a company where you’ll be valued for your efforts in a great working environment.
Hit the ground running as the next Technical Sales Engineer and work with a close-knit team, all based in their Leeds HQ. Share a strong culture of collaboration, technical credibility, and long-term customer partnerships and become the go to face of a brilliant company. Your next role as Technical Sales Engineer awaits.
Your Role As Technical Sales Engineer Will Include:
* Reporting to Service Director * Manage inbound enquiries and develop relationships with warm clients * Collaborate with service coordinators, and internal teams to deliver solutions. The Successful Technical Sales Engineer Will Have:
* Strong technical background in motors (ABB or similar) * Ability to technically specify motors and advise on modifications. * External sales experience with a track record of winning and developing business. For Immediate consideration, please call Liam on: 07458143259
Keywords: Technical Sales Engineer, Sales Engineer, Junior Sales Engineer, Senior Sales Engineer, Engineering Sales, ABB Drives, Motors, Pudsey, Farsley, Bradford, Leeds, ....Read more...
Job Title: Vehicle Technician
Location: Colchester
Salary:£40,000 OTE
About Us: A top automotive dealership with 50 years of excellence in East Anglia. We pride ourselves on exceptional customer service and are seeking a skilled Vehicle Technician for our bustling workshop.
Responsibilities:
- Inspect, diagnose, and repair vehicles following manufacturer guidelines.
- Perform routine maintenance tasks including oil changes, servicing, and brake inspections.
- Use electronic video health checks for vehicle assessments.
- Maintain high-quality standards and address issues efficiently.
- Collaborate effectively with the team.
Requirements:
- Experience as a Vehicle Technician or relevant qualification with MOT tester certification.
- Strong knowledge of vehicle systems and diagnostic tools.
- Excellent problem-solving skills.
- Full UK Driving Licence.
Remuneration:
- Competitive basic wage plus performance-based bonuses.
- Time saved bonus system for efficiency.
Benefits:
- Ongoing training and development.
- Access to the latest technology and tools.
- Employee discounts, cycle to work scheme, health benefits, and more.
- 22 days holiday plus bank holidays.
How to Apply:
If youre interested in this Vacancy. Please click here to apply or contact Rachael on 07885881841 or send your CV to rachael.mortimer@holtautomotive.co.uk
Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.
We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter
Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.....Read more...
We are seeking a Fire Safety Engineer to join a market-leading engineering consultancy, supporting high-hazard industries such as chemical, oil & gas, clean energy, nuclear, and manufacturing based in the Greater Manchester region.This is a days-based permanent position offering up to £70,000 per annum DOE, with flexible working arrangements available (hybrid), alongside a comprehensive benefits package.As a Fire Safety Engineer, you will play a key role in delivering engineering and safety projects, supporting the design of complex facilities, and ensuring compliance with UK regulations and international standards. You will conduct risk assessments, modelling, and scenario analyses, while contributing to innovative safety strategies that protect people, assets, and the environment.What you will be doing:
Conduct conventional fire engineering assessments and high-hazard scenario analyses.
Develop and deliver bespoke safety strategies for complex facilities.
Guide the design of high-hazard buildings and assess risks and impacts.
Facilitate hazard study workshops and contribute to project delivery.
Evaluate prevention, detection, suppression, and control measures.
Understand the design, installation, and maintenance requirements for safety systems.
Prepare technical reports and documentation to high professional standards.
Engage with design teams, contractors, regulators, and other stakeholders.
Who we are looking for:
Experience working in an organisation delivering engineering projects (consultancy background desirable).
Confident liaising with design teams, clients, local authorities, and contractors.
Strong numeracy, attention to detail in technical writing, and excellent time management skills.
Please apply direct or contact Sean Turner at E3R for further information regarding this Fire Safety Engineer opportunity.....Read more...
Tudor Employment Agency is on the lookout for a skilled Bench Technician to join our client’s dynamic workshop team in Walsall Our client specialises in hydraulic tooling and mechanical systems, supplying high-performance equipment across industries including oil & gas, transport, utilities, and manufacturing Their reputation for precision and reliability has earned the trust of global partners in engineering, logistics, and infrastructure Salary: £13.00 – £13.50 per hour Key Responsibilities: Assemble, operate, and test hydraulic equipment including hoses, sub-assemblies, tensioners, pumps, and accessories Pick and pack hydraulic tensioners and components when required Work from technical drawings to build various hydraulic tools♂️Operate forklift trucks and perform slinging and rigging tasks Work independently or as part of a team to meet production deadlines️ Use handheld and power tools in a physical workshop environment Follow MRP systems and workshop procedures What We’re Looking For: Understanding of hydraulic systems and safety risks Ability to use test equipment safely and accurately Basic computer skills and willingness to learn Physically fit, proactive, and passionate about progression Good listener with strong initiative and attention to detail Knowledge of Health & Safety in workshop settings✅ Forklift and slinging/rigging licences (preferred but not essential) Working Hours:Monday–Friday: 8am–4:30pm (weekends are yours! ) Interested? Call Gina or Sam on 01922 725445 & send your CV to: commercial@tudoremployment.co.ukOr drop us a message via email, text, or WhatsApp: 07807 727925 (Quote: TEABENCHTECH/41) ️ Register online: http://tinyurl.com/PERMF0RM Explore more roles: www.tudoremployment.co.uk #TeamTudor is ready to welcome you—don’t miss out!....Read more...
The Job
The Company:
The opportunity to join a fast-growing leading distributor and supplier of mechanical and electrical instrumentation equipment.
Fantastic company culture based on providing quality service to customers.
Excellent opportunities for growth.
The Role of the Internal Sales Engineer
As the Internal Sales Engineer, you will be joining a hard-working and dedicated team who focus on providing their customers with fast, accurate and professional service.
You will respond to enquiries, handle quotations, manage projects and liaise with customers and other teams within the business.
You will provide a solution to customers rather than just sell a product.
You will work to maintain maximum profitability and growth.
Benefits of the Internal Sales Engineer
£28,000 - £45,000 DOE
£32,000 - £50,000 OTE
Annual Leave
Pension
The Ideal Person for the Internal Sales Engineer
You will have proven experience and a good track record within internal and technical sales.
Ideally experience selling to OEMs in Oil and Gas, Petrochemical, Pharmaceutical, Food and Beverage and Process industries.
You will have experience with mechanical or electrical instrumentation equipment or at least relevant mechanical equipment such as valves and pipework.
You will be a hard working, enthusiastic, and ambitious person who works well within a team.
You will have hunger and drive to do well in sales as there are opportunities for progression.
If you think the role of Internal Sales Engineer is for you, apply now!
Consultant: Josh Cumming
Email: joshuac@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
QHSE Manager required for a leading engineering group delivering innovative solutions to global markets.
Operating for over 50 years, this internationally recognised organisation supplies high-performance products to some of the world’s most demanding industries. Due to continued growth, they are now recruiting for a QHSE Manager to join their team in Brighouse, West Yorkshire.
This opportunity is based in Brighouse, making it easily commutable from surrounding areas including Huddersfield, Halifax, Bradford, Wakefield, and Leeds.
Key Responsibilities of the QHSE Manager will include:
Managing the company’s Quality, Health, Safety, and Environmental systems, including ISO 9001 and PED
Leading internal and external audits, ensuring compliance with regulatory and client requirements
Maintaining compliance with HSE policies and supporting the development of ISO 14001 & 45001 standards
Overseeing product quality throughout the manufacturing process, including inspection, testing, and certification
Developing and maintaining quality plans, inspection and test plans, and ensuring accurate documentation
For the role of QHSE Manager, we are keen to receive applications from individuals who have:
Proven experience in Quality and HSE management within the Oil & Gas or related engineering sectors
Salary & Benefits on offer for the QHSE Manager:
Competitive salary – £45,000 - £55,000 Dependent on experience
33 days annual leave (including statutory holidays)
Access to Health Care Cash Plan and Pension Scheme
Excellent working conditions in a modern manufacturing environment
Opportunities for professional development and training
To apply for the QHSE Manager position, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Lewis Lynch at E3 Recruitment for more information.....Read more...
Key responsibilities:
Taking ownership of customer orders and processing them to meet their deadline
Pricing and acknowledging to customer
Keeping customer informed of status of their order
Producing paperwork for shipping
Quoting customers new products
Supporting UK reps
Consignment of customer requirements, reporting and invoicing
Training:Training will be provided by Solihull College, and an assessor will be allocated to support you. Coaching in the workplace, on teams as well as scheduled sessions at the Solihull campus and time spent training will be part of the agreed working hours. At the end of your training, you will complete a showcase of evidence, a practical observation and a professional discussion to achieve level 3 Customer Service Specialist apprenticeship.Training Outcome:Learners will have the opportunity to progress into a full-time, permanent role with the company.Employer Description:MacDermid, Alpha, and Enthone Business Group is the global leader in specialty chemicals and technical services. From advanced surface finishing technology to industry-leading service and support, we develop solutions that drive performance. A team of over 4,000 professionals in over 50 countries manufactures chemicals and materials using the most technologically advanced processes to enhance the products people rely on every day. Our innovation is used in the world’s key industries including electronics, graphic arts, metal & plastic plating and offshore oil production.Working Hours :Hours: 37
Monday to Thursday 08.00 - 16.30
Friday 08.00 - 13.00Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Team working,Self Motivated,Methodical,Good level of English,Good Telephone Manner,Accurate written responses,Excellent Time Management,Desire to learn new skills....Read more...
Job title: Supply Chain Specialist – Procurement
Location: Rio de Janeiro, Brazil
Who are we recruiting for?
We are recruiting on behalf of a global leader in LNG solutions and energy infrastructure. Our client provides flexible and sustainable solutions to global markets and is now seeking a motivated Supply Chain Specialist to strengthen their procurement function within fleet operations.
What will you be doing?
Overseeing procurement activities for fleet assets and projects, ensuring timely delivery of materials and services.
Managing vendor relationships, leading negotiations, and identifying opportunities for cost savings.
Issuing RFQs, evaluating bids, and raising purchase orders through ERP systems.
Collaborating closely with logistics and sourcing teams to streamline supply chain operations.
Ensuring compliance with procurement policies, contracts, and industry standards.
Are you the ideal candidate?
Bachelor’s degree in Business Administration, Supply Chain Management, Procurement, or related field.
Minimum 5 years’ experience in supply chain, ideally in the offshore, oil service, or marine sectors.
Strong knowledge of contracts, vendor negotiations, and procurement processes.
Proficiency in ERP systems and advanced MS Office/Power BI skills.
Strong analytical, organisational, and communication skills.
What’s in it for you?
Work with a forward-looking global energy company.
Opportunity to contribute to the efficient operation of a modern LNG fleet.
Competitive salary and benefits package.
International exposure and career growth in procurement and supply chain.
A collaborative and professional work culture.
Who are we?
Executive Integrity is a global executive search and recruitment consultancy for a more sustainable world with a focus on talent within the Maritime and Renewable Energy sectors. We give a proportion of all our profits to Renewable World, a charity that develops affordable and innovative renewable energy solutions to poverty-stricken communities.
....Read more...
Buyer required for a global leader in high-performance products in the Oil & Gas sector. Operating for 50 years, this internationally recognised organisation operates in over 150 countries, supplying engineered solutions to some of the world’s most demanding industries. Due to continued growth, they are now recruiting for a Buyer to join their team in Brighouse, West Yorkshire.
This opportunity is based in Brighouse, making it easily commutable from surrounding areas including Huddersfield, Halifax, Bradford, Wakefield, and Leeds.
Key Responsibilities of the Buyer will include:
Procuring CNC machined components and raw materials to meet production deadlines
Monitoring internal requisition systems and forecasting product demand based on historical data
Initiating enquiry processes and preparing purchase orders
Negotiating costs and delivery dates to meet budget and customer requirements
Conducting supplier evaluations including business reviews, supplier visits, contract and SLA reviews
Providing input and forecasts on supply relating to specific projects
Collaborating with internal departments including Engineering, Quality, and Operations
For the role of Buyer, we are keen to receive applications from individuals who have:
A good understanding of CNC machining
Experience with raw materials
Proven track record in cost control and supplier development
Ability to negotiate skilfully with internal and external groups
Familiarity with modern procurement and purchasing techniques
Salary & Benefits on offer for the Buyer:
Competitive salary – depending on experience
33 days annual leave (including flexible and statutory holidays)
Access to Health Care Cash Plan and Pension Scheme (post-probation)
Excellent working conditions in a modern manufacturing environment
To apply for the Buyer position, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Lewis Lynch at E3 Recruitment for more information.....Read more...
