Job Title: Multi-Skilled Maintenance Engineer Salary: Up to £47,000 Shift: 4 on 4 off D/N Location: South LondonSynergi are recruiting for an Multi Skilled Maintenance Engineer to join a leading FMCG company in South London. This is an opportunity to join one of the nation’s leading food manufacturer. The successful Electrical Maintenance Engineer would be joining the team on a 4 on 4 off rotating shift pattern. This is an ideal position for a Multiskilled Maintenance Engineer with a proactive and keen approach towards learning and development.As a Multiskilled Maintenance Engineer, you will be responsible for overseeing Planned Maintenance and ensure standards are hit. You will be diagnosing faults, identifying problems on machinery, and implementing solutions. Responsibilities of the Multi-Skilled Maintenance Engineer:
Responsible for reactive and proactive maintenance work; including breakdowns and planned maintenance to the production line machinery
The ability to Fault Find on automated machinery.
Drive and initiate continuous improvement across the factory to enhance quality, efficiency, performance, safety and waste reduction
Provide support to other engineering teams and contractors as required.
To update all areas of knowledge as required to carry out the job with maximum effectiveness and to attend training/development courses as and when required
Skills Required for the Multi-Skilled Maintenance Engineer:
Apprenticeship and/or equivalent in Mechanical Engineering
Engineering Qualification, certifications (18th edition, NVQ level 3, etc..)
Previous experience as a Maintenance Engineer within a manufacturing environment (FMCG)
Able to demonstrate a strong work ethic
What you need to do now If you are a Multi-Skilled Maintenance Engineer and are interested in Maintenance Engineer roles, please apply through this advert.Contact Information: Please apply below Multi-Skilled Maintenance Engineer, FMCG, Manufacturing, Food, Packaging, Distribution, Maintenance Engineer, Multi-Skilled Maintenance Engineer....Read more...
An exciting opportunity has arisen with a leading industrial control and automation specialist who are looking for an Electrical Design Engineer to play a pivotal role in delivering high-quality electrical and instrumentation design solutions to clients across a variety of industries.
As an experienced Electrical Design Engineer, you will contribute to the full project lifecycle — from design and specification through to panel build, installation, and commissioning — ensuring each system meets the highest standards of technical excellence, safety, and client satisfaction.
Key responsibilities for the Electrical Design Systems Engineer based in Hampshire.
Delivering professional electrical and instrumentation design services for industrial control systems.
Carrying out or overseeing hardware design, panel build, installation, and commissioning activities.
Producing and reviewing technical documentation including electrical schematics, single-line diagrams, and device schedules.
Managing project finances and ensuring compliance with company and client standards.
Liaising directly with clients, suppliers, and subcontractors to ensure successful project delivery.
Maintaining accurate project records, manuals, and design documentation.
Ensuring adherence to the company ISO9000 quality management system and Health & Safety standards.
Stay up to date with relevant British Standards and industry best practices.
Key skills for the Electrical Design Systems Engineer based in Hampshire.
Proven experience in modern industrial control and instrumentation system design.
Proven competency with SolidWorks Electrical or similar software such as AutoCAD Electrical or EPLAN.
Experience of SISTEMA and Trimble ProDesign would be an advantage but is not a prerequisite.
Knowledge of electrical systems up to 415V AC and relevant safety standards (BS 7671, BS EN 60204, BS EN 61508, etc.).
Excellent communication and documentation skills.
Strong organisational and problem-solving ability, with attention to quality and deadlines.
Minimum of an Honours Degree or HNC in Electrical / Control Engineering with demonstratable industry experience in Electrical Design.
Current UK driving licence and valid passport – willingness to occasionally travel and stay away from home.
Right to work in the UK (Candidates must be eligible for SC clearance).
This is a superb opportunity for a motivated Electrical Design Engineer seeking to broaden their experience within a supportive, technically driven company that values professionalism, innovation, and teamwork.
Join and play a key role in delivering industry-leading automation and control solutions!
APPLY NOW! To apply for the Systems Engineer role based in Hampshire, please send your CV to clam@redlinegroup.Com, or for more information contact Chuck Lam on 01582 878868 or 07961 158586.....Read more...
The Maintenance Engineer vacancy is working with a market leading manufacturing firm based in the Widnes area of Liverpool. The position offers excellent opportunities for both training and career development.What's in it for you as a Maintenance Engineer
Hours of work 40 hours per week – Mon – Fri Days (Mornings and afternoons - 6-2/2-10)
Salary - Up to £42,000 per annum
Overtime at a premium of 1.5x
KPI Production bonus
Company profit share scheme
Excellent pension company contribution
Training and career development opportunities
30 days holiday (Increasing by 1 each year up to finishing at 36 days holiday) Inclusive of Bank Holidays
Main Duties & Responsibilities of Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
Maintenance Engineer experience or qualifications of a Maintenance Engineer
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled engineer, Maintenance Electrician....Read more...
If youre an experienced Production Engineer who thrives on bringing new products to life and making manufacturing smoother, this is one youll want to look at.
Youll be joining a well-established engineering business with a brilliant reputation for designing and building complex electro-mechanical assemblies. The role sits within their Engineering team, supporting new product introductions from concept through to full production making sure everything is efficient, safe, and built right first time.
What youll be doing as a Production Engineer:
- Supporting the integration of new products into production creating work instructions, selecting tooling, jigs and fixtures, and optimising line layouts.
- Reviewing and standardising work methods to reduce variability and improve quality.
- Identifying and delivering process improvements through Lean and Six Sigma projects.
- Training and supporting production staff to maintain high quality and consistency.
- Conducting PFMEA as part of project lifecycle reviews.
- Running post-build reviews during pre-production to spot and resolve issues early.
What were looking for in a Production Engineer:
- Proven experience as a Production Engineer (or similar) within an assembly or manufacturing environment.
- HND or equivalent in Mechanical, Industrial or Production Engineering.
- Hands-on experience with Lean manufacturing and Six Sigma principles.
- Strong 3D CAD skills (SolidWorks or Autodesk Inventor preferred).
- Practical, problem-solving mindset able to turn challenges into workable solutions.
- Confident communicator who enjoys working closely with design and production teams.
Nice to have:
- Experience with castings, injection moulding, gear design or flowline manufacture.
- Green Belt Six Sigma certification.
Youll be part of a forward-thinking engineering environment where quality, precision, and teamwork really matter. Every project brings something new, and your input will make a visible difference to how products are made and delivered.
How to Apply
Interested? Id love to tell you more about this role call Ian Broadhurst at Holt Engineering on 07734406996 or drop me a message at ian.broadhurst@holtengineering.co.uk
....Read more...
An Opportunity Has Arisen for a Field Service Technician (Door Security Systems) to join a well-established company specialising in the design, manufacturing, and installation of high-quality physical security and entrance-control solutions.
As a Field Service Technician, you will be providing expert service, maintenance, and repair of specialist security and access equipment across client sites.
This is an on-field role offering a salary range of £35,000 - £37,000 and benefits. You will not be required to take part in on-call duties but expect to work overtime.
You Will Be Responsible For:
* You will act as the main contact for all technical service duties, covering upkeep, restoration, setup, and issue resolution.
* Carrying out planned maintenance, repair, and troubleshooting of mechanical and electrical systems
* Maintaining accurate service records and job updates via mobile devices
* Managing van stock efficiently and ensuring all tools and materials are available for assigned work
* Ensuring work is completed to the highest safety and quality standards
* Supporting colleagues in the field when required
* Providing excellent service to customers and representing the company professionally at all times
What We Are Looking For:
* Previously worked as a Field Service Technician, Field Service Engineer, Field Engineer, Field Technician, Maintenance Engineer, Maintenance Technician, Service Technician, Service Engineer, Installation Engineer, Automatic Door Engineer, Roller Shutter Engineer, Industrial Door Engineer, Door Engineer or in a similar role.
* Prior field service experience preferably in mechanical or electrical environment.
* Ideally have experience with roller shutters and automatic doors
* Skilled in diagnosing faults and carrying out equipment repairs
* Confident using tablets or mobile devices for job management
* Full UK driving licence
What's on offer:
* Competitive Salary
* Overtime opportunities.
* Paid travel time for early starts or late finishes.
* Comprehensive training and development plan.
* 25 days annual leave plus 8 bank holidays.
* Workplace pension (employee 5%, employer 3%).
* Access to an Employee Assistance Programme offering same-day GP consultations, physiotherapy, and wellbeing support.
* Increasing sick pay entitlement with length of service.
This is a fantastic opportunity to join a respected business and take the next step in your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Access control, Entrance control, security systems, Doors & Shutters, Doors, Shutters, roller shutter
....Read more...
As a Degree Apprentice, you’ll:
Rotate through specialist teams across Airframe, Design & Stress, Systems Integration, Quality, Support Engineering, and Advanced Manufacturing
Be involved in the full lifecycle of aerospace systems and products – from design and development, to testing, qualification, and in-service support
Learn how to read and interpret engineering drawings, reports, and computer-generated models
Collaborate with engineers from across multiple disciplines.
Develop problem-solving skills to design, test, validate, and improve engineering solutions
Spend your first year at Weston College working towards your Level 2 qualification, before moving on site in Bristol from Year 2, where you’ll progress through your Level 4 and Level 6 qualifications
Contribute to STEM outreach and community projects — because engineering isn’t just about technology, it’s about people too
You’ll gain knowledge and skills in:
Aerospace systems, aeronautical sciences, and material sciences
Engineering processes and practices (mechanical, electrical, electronic systems)
Analytical methods and engineering mathematics
Regulatory, environmental, and quality standards
Real-world engineering skills such as planning, testing, inspection, production, and lifecycle management
The importance of sustainability, safety, and teamwork in real projects
Training:Year 1: College-based learning, combining a Bachelor of Engineering (BEng) with hands-on foundational training in engineering.
Years 2–4: Rotate across different technical departments at GKN sites, gaining real-world industry experience while continuing your university studies (day release).Training Outcome:Career Opportunities: On successful completion, apprentices can progress into exciting roles such as: Design Engineer, Analysis Engineer, Technology Engineer, Materials & Process Engineer, Manufacturing Engineer, Quality Engineer.Employer Description:Fantastic challenges. Amazing opportunities.
GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we’re inspired by the opportunities to innovate and break boundaries. We’re proud to play a part in protecting the world’s democracies. And we’re committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 38 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers. There are no limits to where you can take your career.
Together as “one GKN” we’re moving our business and industry forward developing technologies that rapidly decarbonise aircraft, and innovating to help build a new generation of planes that produce zero emissions.Working Hours :Monday to Friday.
Exact Shifts TBC.Skills: Problem solving skills,Team working,Innovation,Interest in engineering,Collaborative,Ownership,Curiosity,Proactivity....Read more...
An exciting opportunity has arisen for a Senior Drainage Engineer to join a well-regarded consultancy known for delivering innovative and sustainable transport planning solutions.
As a Senior Drainage Engineer, you will be responsible for developing and delivering drainage and highway designs for new development projects. This role offers a competitive salary and benefits.
They will consider all level of candidates.
You will be responsible for:
? Design technical solutions for highway and drainage systems to support S104, S38, and S278 applications.
? Perform a range of technical assessments for new developments.
? Provide guidance and technical explanations to junior staff and clients.
? Review technical documents, reports, and drawings produced by junior team members.
? Present technical information to internal and external stakeholders.
? Manage projects to ensure high-quality delivery on time and to specification.
? Regularly update progress and collaborate with Project Managers to coordinate tasks.
? Ensure compliance with industry standards and regulations in all project phases.
? Stay up to date with the latest industry trends, best practices, and innovations in civil engineering.
What we are looking for:
? Previously worked as a Drainage Engineer, Civil Engineer, Drainage Design Engineer, Cvil Infrastructure Engineer, Drainage and Highways Engineer or in a similar role.
? Possess 2 years' experience working in UK development-related infrastructure engineering.
? Experience in preparing highways or drainage designs, particularly S38, S278, and S104 processes.
? Background in writing flood risk assessments or drainage strategies.
? Proficient in drainage design principles and skilled in using Microdrainage and/or Causeway Flow software.
? Degree or equivalent qualification in Civil Engineering or a related field.
? Understanding of relevant UK design standards, including DMRB, Manual for Streets, Sewers for Adoption, and nat....Read more...
An exciting opportunity has arisen for a Senior Highway Engineer to join a well-regarded consultancy known for delivering innovative and sustainable transport planning solutions.
As a Senior Highway Engineer, you will be responsible for developing and delivering drainage and highway designs for new development projects. This role offers a competitive salary and benefits.
They will consider all level of candidates.
You will be responsible for:
? Design technical solutions for highway and drainage systems to support S104, S38, and S278 applications.
? Perform a range of technical assessments for new developments.
? Provide guidance and technical explanations to junior staff and clients.
? Review technical documents, reports, and drawings produced by junior team members.
? Present technical information to internal and external stakeholders.
? Manage projects to ensure high-quality delivery on time and to specification.
? Regularly update progress and collaborate with Project Managers to coordinate tasks.
? Ensure compliance with industry standards and regulations in all project phases.
? Stay up to date with the latest industry trends, best practices, and innovations in civil engineering.
What we are looking for:
? Previously worked as a Highway Engineer, Highway Design Engineer, Civil Engineer, Civil Infrastructure Engineer, Highway and Drainage Engineer or in a similar role.
? Possess 2 years' experience working in UK development-related infrastructure engineering.
? Experience in preparing highways or drainage designs, particularly S38, S278, and S104 processes.
? Background in writing flood risk assessments or drainage strategies.
? Proficient in drainage design principles and skilled in using Microdrainage and/or Causeway Flow software.
? Degree or equivalent qualification in Civil Engineering or a related field.
? Understanding of relevant UK design standards, including DMRB, Manual for Streets, Sewers for Adoption, and nationa....Read more...
Test Engineer – A Growing FinTech - Linz, Austria
(Tech stack: Test Automation, Test Design, Test Management, Selenium, Postman, JIRA, ISTQB, Agile, V-Model, Scrum, CI/CD, Test Reporting, Quality Assurance, Regression Testing, UAT, Jenkins, Test Strategy, Functional Testing, Non-functional Testing, API Testing, Software QA)
Headquartered in Linz, our client is redefining the future of FinTech, building next-generation solutions that blend AI and cloud computing to revolutionise financial services. Their cutting-edge platform enables real-time payments, automated wealth management, and embedded finance, empowering businesses to provide seamless, data-driven financial experiences. With a team of top-tier engineers, they are pushing the boundaries of digital transactions and decentralized finance.
As they expand their operations, they are looking for a Test Engineer to ensure the highest quality of their innovative products, develop and drive a robust testing framework, and play a key role in delivering secure, reliable financial systems.
Our client is looking for passionate Test Engineer candidates with experience in some or all of the following (full training will be provided to fill any gaps in your skill set): Test Automation, Test Design, Test Management, Selenium, Postman, JIRA, ISTQB, Agile, V-Model, Scrum, CI/CD, Test Reporting, Quality Assurance, Regression Testing, UAT, Jenkins, Test Strategy, Functional Testing, Non-functional Testing, API Testing, Software QA.
All Test Engineer positions come with the following benefits:
Shares in the company.
Pension scheme (8%).
3 hours ‘free time’ each week to investigate new technologies.
27 days holiday (excluding Public Holidays) plus your birthday off.
Flexible working hours.
Location: Linz, Austria/ Hybrid Working
Salary: €50,000 - €70,000 + Pension + Benefits
Applicants must be based in Austria and have the right to work in Austria even though remote working is available.
NOIRAUSTRIAREC
NOIREUROPEREC
NOIREURNET....Read more...
Company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Senior Manufacturing Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables.The successful Senior Manufacturing Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Senior Manufacturing Engineer will include:
Be the Subject Matter Expert for manufacturing processes liaising between Design Engineer team and Machine Tool Operators
Provide technical guidance, problem solving skills and direction to the Manufacturing & Assembly teams to ensure quality standards and programme schedules are maintained
Advise on the manufacturability of components and ability of machines to achieve right first time during the design reviews
Lead PFMEA reviews including process mapping, risk mitigation and creation of approval procedures
Interpret and translate technical drawings into manufacturing drawings
Drive Continuous Improvement within each project
Create, maintain and improve works orders with accurate routings
For the Senior Manufacturing Engineer role, we are keen to receive CV’s from candidates who possess:
Experience as a Senior Manufacturing Engineer, within an Engineering environment where Turning, Boring, Milling and CNC processes are utilised
A working knowledge of assembly processes
A strong understanding of Geometric Dimensioning & Tolerancing
Ability to use 2D & 3D CAD
Experience CNC programming
Salary & Benefits:
up to £50,000 depending on experience
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Senior Manufacturing Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information.....Read more...
Position: Electrical Design Engineer
Job ID: 1799/59
Location: Hampshire
Rate/Salary: £45,000 - £50,000
Type: Permanent
Benefits:
Van, Mobile, Laptop
Competitive pay and benefits that reflect your skills and experience.
Ongoing training and development to support your career progression.
Company Van and laptop
Enhanced holiday
Gym and fitness privileges
Health and Wellbeing benefits including on demand GP services
Employee retail discount schemes
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have a few permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: (Electrical Design Engineer)
Typically, as an Electrical Design Engineer plays a key role in designing, developing, and delivering high-quality electrical solutions for critical power applications. This position requires expertise in power distribution, backup systems, and electrical infrastructure to ensure reliability and efficiency in mission-critical environments such as data centres, healthcare facilities, industrial operations, and emergency power systems.
HSB Technical’s client is an established and well-regarded business entity.
Duties and responsibilities of the (Electrical Design Engineer)
Technical:
Design electrical systems, including control panels, generator controllers, UPS, and electrical distribution.
Support both LV and HV applications, ensuring compliance with BS7671 and CDM regulations.
Create and manage electrical schematics using CAD software.
Ensure designs meet industry standards and project requirements.
Conduct FAT/SAT testing and on-site commissioning.
Provide technical support and troubleshooting.
Plan and schedule design projects to ensure timely, on-budget delivery.
Manage scope changes and identify potential profit opportunities.
Collaborate with internal teams to meet project goals and maintain high-quality standards.
Qualifications and requirements for the (Electrical Design Engineer)
A Degree in Electrical engineering or ONC/HNC in Electrical Engineering (or equivalent experience).
Strong IT and CAD proficiency.
Experience in electrical design, switchgear, and control panels; PLC programming is a plus.
Knowledge of relevant regulations and industry standards.
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.....Read more...
The Maintenance Engineer vacancy is working with a market leading Blue Chip Manufacturing firm in the Gravesend area of Kent. The position offers excellent opportunities for both training and career development working with a good mix of PPM and reactive taskings.What’s in it for your as a Maintenance Engineer:
Hours of work – Week 1 - Monday - Friday 6am-3pm // Week 2 - Monday - Thursday 12pm -10pm
Salary – Circa £43,500 per annum
Location - Gravesend, Kent
OT paid at 1.5 and 2x
Completive Pension
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above – Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
This position would suit Multi-Skilled Engineer, Maintenance Engineer, Maintenance Electrician and Maintenance Fitter....Read more...
The Maintenance Engineer vacancy is working with a market leading Blue Chip Manufacturing firm in the Stanford Le Hope area. The position offers excellent opportunities for both training and career development and development. Fully automated site working with a market leading FMCG Manufacturing company.What’s in it for your as a Maintenance Engineer:
Hours of work – Days and Nights 4 on 4 off – 6am to 6pm
Salary – Circa £60,000 per annum (Including Shift Allowance)
Location - Sandford Le Hope, Essex
Annual KPI Bonus
OT paid at 1.5 and 2x
Completive Pension
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above – Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled engineer etc....Read more...
We're working with a forward-thinking renewable energy company specialising in low-carbon heating solutions. Due to growth, they are looking for Heating Engineer to join their team delivering air source heat pump (ASHP) installations and domestic heating upgrades across residential properties.
In this role, you will be installing and maintaining sealed domestic heating systems, with a focus on low-carbon technology.
We are currently recruiting for two Senior positions: a Plumbing & Heating Engineer and a Heating Engineer (F-Gas qualified).
This full-time permanent role offers a salary range of £40,000 - £45,000 and benefits.
You will be responsible for:
* Install, commission and maintain air source heat pumps in residential homes.
* Work on associated heating systems including sealed systems, radiators, hot water cylinders and underfloor heating.
* Carry out fault finding, diagnostics and repairs on ASHP systems.
* Ensure all work is completed to high safety and quality standards.
* Support and mentor junior engineers where required.
What we are looking for
* Previously worked as a Heating Engineer, Heat Pump Engineer, Plumbing and Heating Engineer, Boiler Engineer, Plumbing Engineer, Gas Engineer, Pump Engineer or in a similar role.
* Proven experience installing and maintaining air source heat pumps in domestic settings.
* Ideally have 2+ years of experience in domestic plumbing & heating systems (sealed systems, hot water, radiators).
* F-Gas certification
* NVQ Level 2+ in Plumbing & Heating (or equivalent).
* Full, clean UK driving licence.
What's On Offer
* Competitive Salary
* Company vehicle and fuel card.
* Uniform, PPE provided.
* Pension scheme.
* Ongoing training and career development.
* Supportive, forward-thinking working environment.
This is a fantastic opportunity for an experienced Heat Pump Engineer to take on a lead role in a forward-thinking renewables company.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
We're working with a forward-thinking renewable energy company specialising in low-carbon heating solutions. Due to growth, they are looking for Heating Engineer to join their team delivering air source heat pump (ASHP) installations and domestic heating upgrades across residential properties.
In this role, you will be installing and maintaining sealed domestic heating systems, with a focus on low-carbon technology.
We are currently recruiting for two Senior positions: a Plumbing & Heating Engineer and a Heating Engineer (F-Gas qualified).
This full-time permanent role offers a salary range of £40,000 - £45,000 and benefits.
You will be responsible for:
* Install, commission and maintain air source heat pumps in residential homes.
* Work on associated heating systems including sealed systems, radiators, hot water cylinders and underfloor heating.
* Carry out fault finding, diagnostics and repairs on ASHP systems.
* Ensure all work is completed to high safety and quality standards.
* Support and mentor junior engineers where required.
What we are looking for
* Previously worked as a Heating Engineer, Heat Pump Engineer, Plumbing and Heating Engineer, Boiler Engineer, Plumbing Engineer, Gas Engineer, Pump Engineer or in a similar role.
* Proven experience installing and maintaining air source heat pumps in domestic settings.
* Ideally have 2+ years of experience in domestic plumbing & heating systems (sealed systems, hot water, radiators).
* F-Gas certification
* NVQ Level 2+ in Plumbing & Heating (or equivalent).
* Full, clean UK driving licence.
What's On Offer
* Competitive Salary
* Company vehicle and fuel card.
* Uniform, PPE provided.
* Pension scheme.
* Ongoing training and career development.
* Supportive, forward-thinking working environment.
This is a fantastic opportunity for an experienced Heat Pump Engineer to take on a lead role in a forward-thinking renewables company.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
We're working with a forward-thinking renewable energy company specialising in low-carbon heating solutions. Due to growth, they are looking for Heating Engineer to join their team delivering air source heat pump (ASHP) installations and domestic heating upgrades across residential properties.
In this role, you will be installing and maintaining sealed domestic heating systems, with a focus on low-carbon technology.
We are currently recruiting for two Senior positions: a Plumbing & Heating Engineer and a Heating Engineer (F-Gas qualified).
This full-time permanent role offers a salary range of £40,000 - £45,000 and benefits.
You will be responsible for:
* Install, commission and maintain air source heat pumps in residential homes.
* Work on associated heating systems including sealed systems, radiators, hot water cylinders and underfloor heating.
* Carry out fault finding, diagnostics and repairs on ASHP systems.
* Ensure all work is completed to high safety and quality standards.
* Support and mentor junior engineers where required.
What we are looking for
* Previously worked as a Heating Engineer, Heat Pump Engineer, Plumbing and Heating Engineer, Boiler Engineer, Plumbing Engineer, Gas Engineer, Pump Engineer or in a similar role.
* Proven experience installing and maintaining air source heat pumps in domestic settings.
* Ideally have 2+ years of experience in domestic plumbing & heating systems (sealed systems, hot water, radiators).
* F-Gas certification
* NVQ Level 2+ in Plumbing & Heating (or equivalent).
* Full, clean UK driving licence.
What's On Offer
* Competitive Salary
* Company vehicle and fuel card.
* Uniform, PPE provided.
* Pension scheme.
* Ongoing training and career development.
* Supportive, forward-thinking working environment.
This is a fantastic opportunity for an experienced Heat Pump Engineer to take on a lead role in a forward-thinking renewables company.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
We're working with a forward-thinking renewable energy company specialising in low-carbon heating solutions. Due to growth, they are looking for Heating Engineer to join their team delivering air source heat pump (ASHP) installations and domestic heating upgrades across residential properties.
In this role, you will be installing and maintaining sealed domestic heating systems, with a focus on low-carbon technology.
We are currently recruiting for two Senior positions: a Plumbing & Heating Engineer and a Heating Engineer (F-Gas qualified).
This full-time permanent role offers a salary range of £40,000 - £45,000 and benefits.
You will be responsible for:
* Install, commission and maintain air source heat pumps in residential homes.
* Work on associated heating systems including sealed systems, radiators, hot water cylinders and underfloor heating.
* Carry out fault finding, diagnostics and repairs on ASHP systems.
* Ensure all work is completed to high safety and quality standards.
* Support and mentor junior engineers where required.
What we are looking for
* Previously worked as a Heating Engineer, Heat Pump Engineer, Plumbing and Heating Engineer, Boiler Engineer, Plumbing Engineer, Gas Engineer, Pump Engineer or in a similar role.
* Proven experience installing and maintaining air source heat pumps in domestic settings.
* Ideally have 2+ years of experience in domestic plumbing & heating systems (sealed systems, hot water, radiators).
* F-Gas certification
* NVQ Level 2+ in Plumbing & Heating (or equivalent).
* Full, clean UK driving licence.
What's On Offer
* Competitive Salary
* Company vehicle and fuel card.
* Uniform, PPE provided.
* Pension scheme.
* Ongoing training and career development.
* Supportive, forward-thinking working environment.
This is a fantastic opportunity for an experienced Heat Pump Engineer to take on a lead role in a forward-thinking renewables company.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
We're working with a rapidly growing renewable energy company who specialise in air source heat pump (ASHP) installations across residential properties. They are now looking for an experienced Heat Pump Engineer to join their team, taking responsibility for the installation, commissioning and servicing of domestic low-carbon heating systems.
In this role, you will be installing and maintaining sealed domestic heating systems, with a focus on low-carbon technology.
We are currently recruiting for two Senior positions: a Plumbing & Heating Engineer and a Heating Engineer (F-Gas qualified).
This full-time permanent role offers a salary range of £40,000 - £45,000 and benefits.
You will be responsible for:
* Install, commission and maintain air source heat pumps in residential homes.
* Work on associated heating systems including sealed systems, radiators, hot water cylinders and underfloor heating.
* Carry out fault finding, diagnostics and repairs on ASHP systems.
* Ensure all work is completed to high safety and quality standards.
* Support and mentor junior engineers where required.
What we are looking for
* Previously worked as a Heat Pump Engineer, Plumbing and Heating Engineer, Heating Engineer, Boiler Engineer, Plumbing Engineer, Gas Engineer, Pump Engineer or in a similar role.
* Proven experience installing and maintaining air source heat pumps in domestic settings.
* Ideally have 2+ years of experience in domestic plumbing & heating systems (sealed systems, hot water, radiators).
* F-Gas certification
* NVQ Level 2+ in Plumbing & Heating (or equivalent).
* Full, clean UK driving licence.
What's On Offer
* Competitive Salary
* Company vehicle and fuel card.
* Uniform, PPE provided.
* Pension scheme.
* Ongoing training and career development.
* Supportive, forward-thinking working environment.
This is a fantastic opportunity for an experienced Heat Pump Engineer to take on a lead role in a forward-thinking renewables company.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
We're working with a rapidly growing renewable energy company who specialise in air source heat pump (ASHP) installations across residential properties. They are now looking for an experienced Heat Pump Engineer to join their team, taking responsibility for the installation, commissioning and servicing of domestic low-carbon heating systems.
In this role, you will be installing and maintaining sealed domestic heating systems, with a focus on low-carbon technology.
We are currently recruiting for two Senior positions: a Plumbing & Heating Engineer and a Heating Engineer (F-Gas qualified).
This full-time permanent role offers a salary range of £40,000 - £45,000 and benefits.
You will be responsible for:
* Install, commission and maintain air source heat pumps in residential homes.
* Work on associated heating systems including sealed systems, radiators, hot water cylinders and underfloor heating.
* Carry out fault finding, diagnostics and repairs on ASHP systems.
* Ensure all work is completed to high safety and quality standards.
* Support and mentor junior engineers where required.
What we are looking for
* Previously worked as a Heat Pump Engineer, Plumbing and Heating Engineer, Heating Engineer, Boiler Engineer, Plumbing Engineer, Gas Engineer, Pump Engineer or in a similar role.
* Proven experience installing and maintaining air source heat pumps in domestic settings.
* Ideally have 2+ years of experience in domestic plumbing & heating systems (sealed systems, hot water, radiators).
* F-Gas certification
* NVQ Level 2+ in Plumbing & Heating (or equivalent).
* Full, clean UK driving licence.
What's On Offer
* Competitive Salary
* Company vehicle and fuel card.
* Uniform, PPE provided.
* Pension scheme.
* Ongoing training and career development.
* Supportive, forward-thinking working environment.
This is a fantastic opportunity for an experienced Heat Pump Engineer to take on a lead role in a forward-thinking renewables company.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
We're working with a rapidly growing renewable energy company who specialise in air source heat pump (ASHP) installations across residential properties. They are now looking for an experienced Heat Pump Engineer to join their team, taking responsibility for the installation, commissioning and servicing of domestic low-carbon heating systems.
In this role, you will be installing and maintaining sealed domestic heating systems, with a focus on low-carbon technology.
We are currently recruiting for two Senior positions: a Plumbing & Heating Engineer and a Heating Engineer (F-Gas qualified).
This full-time permanent role offers a salary range of £40,000 - £45,000 and benefits.
You will be responsible for:
* Install, commission and maintain air source heat pumps in residential homes.
* Work on associated heating systems including sealed systems, radiators, hot water cylinders and underfloor heating.
* Carry out fault finding, diagnostics and repairs on ASHP systems.
* Ensure all work is completed to high safety and quality standards.
* Support and mentor junior engineers where required.
What we are looking for
* Previously worked as a Heat Pump Engineer, Plumbing and Heating Engineer, Heating Engineer, Boiler Engineer, Plumbing Engineer, Gas Engineer, Pump Engineer or in a similar role.
* Proven experience installing and maintaining air source heat pumps in domestic settings.
* Ideally have 2+ years of experience in domestic plumbing & heating systems (sealed systems, hot water, radiators).
* F-Gas certification
* NVQ Level 2+ in Plumbing & Heating (or equivalent).
* Full, clean UK driving licence.
What's On Offer
* Competitive Salary
* Company vehicle and fuel card.
* Uniform, PPE provided.
* Pension scheme.
* Ongoing training and career development.
* Supportive, forward-thinking working environment.
This is a fantastic opportunity for an experienced Heat Pump Engineer to take on a lead role in a forward-thinking renewables company.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
We're working with a rapidly growing renewable energy company who specialise in air source heat pump (ASHP) installations across residential properties. They are now looking for an experienced Heat Pump Engineer to join their team, taking responsibility for the installation, commissioning and servicing of domestic low-carbon heating systems.
In this role, you will be installing and maintaining sealed domestic heating systems, with a focus on low-carbon technology.
We are currently recruiting for two Senior positions: a Plumbing & Heating Engineer and a Heating Engineer (F-Gas qualified).
This full-time permanent role offers a salary range of £40,000 - £45,000 and benefits.
You will be responsible for:
* Install, commission and maintain air source heat pumps in residential homes.
* Work on associated heating systems including sealed systems, radiators, hot water cylinders and underfloor heating.
* Carry out fault finding, diagnostics and repairs on ASHP systems.
* Ensure all work is completed to high safety and quality standards.
* Support and mentor junior engineers where required.
What we are looking for
* Previously worked as a Heat Pump Engineer, Plumbing and Heating Engineer, Heating Engineer, Boiler Engineer, Plumbing Engineer, Gas Engineer, Pump Engineer or in a similar role.
* Proven experience installing and maintaining air source heat pumps in domestic settings.
* Ideally have 2+ years of experience in domestic plumbing & heating systems (sealed systems, hot water, radiators).
* F-Gas certification
* NVQ Level 2+ in Plumbing & Heating (or equivalent).
* Full, clean UK driving licence.
What's On Offer
* Competitive Salary
* Company vehicle and fuel card.
* Uniform, PPE provided.
* Pension scheme.
* Ongoing training and career development.
* Supportive, forward-thinking working environment.
This is a fantastic opportunity for an experienced Heat Pump Engineer to take on a lead role in a forward-thinking renewables company.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Technical Sales EngineerBirmingham
£50,000 - £60,000 Basic + Commission (OTE £5,000-£10,000) + Bonus OEM + Great Reputation + Good Package + IMMEDIATE START
Are you looking for a Technical Sales Engineer role with cutting tools experience looking for a company where you will be a specialist? Work for a great manufacturing company in a niche industry, who pride themselves on providing a high quality service where you can earn well and make this role your own.
This recession proof business manufactures a variety of products across the globe supplying to different specialist industries and are market leaders. The lucky applicant will work as a Technical Sales Engineer and will be on the road selling on a solution basis to new and current clients where you can really make the role your own.
This Technical Sales Engineer role will include:
* Technical Sales Engineer role - cutting tools * Product training * Solution selling - understanding technical requirements, preparing quotes * Building relationships with customers * Customer visits around West Midlands
The successful Technical Sales Engineer will have:
* Background as a Technical Sales Engineer or similar * Must have sold cutting tools * Live commutable to West Midlands and be happy to travel to customer sites
If interested, please apply or contact Georgia Daly on 07458163040.
Keywords: technical sales engineer, business development manager, account manager, cutting tools, engineering, birmingham, coventry, wolverhampton, dudley, worcester
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd We can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Manufacturing Engineer
Poole, Dorset
Manufacturing Engineer Salary: £40,000£45,000
Join a precision engineering team where your ideas shape how things are made.
Were working with a respected aerospace & defence manufacturer based in Poole thats known for its high-precision machining and assembly work. Theyre on the lookout for an experienced Manufacturing Engineer to strengthen their engineering team and help refine manufacturing methods across the shop floor.
As a Manufacturing Engineer, youll take ownership of developing and optimising machining and assembly processes, ensuring jobs are released to AS9100 standards and run efficiently from start to finish. Youll be the technical go-to person for production, working closely with both customers and suppliers to get parts right first time, every time.
Day-to-day as a Manufacturing Engineer, youll:
- Determine and plan optimum manufacturing methods and processes
- Produce detailed job packs for release to the shop floor
- Support production teams with technical problem-solving
- Identify and manage tooling requirements for new components
- Collaborate with customers and suppliers to maintain quality and efficiency
- Work to strict AS9100 and customer specifications
What were looking for in a Manufacturing Engineer:
- Proven experience as a Manufacturing Engineer within aerospace or other high-precision sectors
- Strong understanding of machining and manufacturing processes
- Good knowledge of materials and surface treatments
- Awareness of commercial factors in production planning
- Experience using ERP systems and Excel
- CAD experience (Catia) would be a real bonus
What youll get:
- Flexible working hours and a 4-day working week
- Salary up to £45,000, depending on experience
- The chance to work on high-end aerospace components where precision really matters
- Supportive environment that values engineering input and continuous improvement
If youre a Manufacturing Engineer who enjoys solving problems, improving processes, and seeing your work make a difference, this role is worth a look.
Call Hayden at Holt Engineering on 07955 081 482.....Read more...
An exciting opportunity has arisen for an Associate Civil Engineer (Highways / Drainage) to join a well-regarded consultancy known for delivering innovative and sustainable transport planning solutions.
As an Associate Civil Engineer, you will be responsible for leading infrastructure design work, focusing on highways and drainage schemes, while managing projects and supporting wider teams.
This role offers a competitive salary and benefits.
You will be responsible for:
* Design technical solutions for highway and drainage systems to support S104, S38, and S278 applications.
* Perform a range of technical assessments for new developments.
* Provide guidance and technical explanations to junior staff and clients.
* Review technical documents, reports, and drawings produced by junior team members.
* Present technical information to internal and external stakeholders.
* Manage projects to ensure high-quality delivery on time and to specification.
* Regularly update progress and collaborate with Project Managers to coordinate tasks.
* Ensure compliance with industry standards and regulations in all project phases.
* Stay up to date with the latest industry trends, best practices, and innovations in civil engineering.
What we are looking for:
* Previously worked as a Associate Civil Engineer, Principal Civil Engineer, Senior Civil Engineer, Civil Engineer, Highways Engineer, Highways and Drainage Engineer, Drainage Engineer, Senior Drainage Engineer, Drainage Design Engineer, Highway Design Engineer, Design Engineer or in a similar role.
* At least 10 years of experience in UK highway and infrastructure projects, from feasibility to delivery.
* Experience in preparing highways and drainage designs.
* Understanding of Section 38, Section 278, Section 102/104 and S185 submissions.
* Degree or higher qualification in Civil Engineering or a related discipline.
* Chartered Engineer status (CEng) with ICE or CIHT.
* Technical knowledge of DMRB, MCHW, Manual for Streets, LTN 1/20 and other current standards.
* Skilled in software such as AutoCAD, Civil 3D and drainage design packages.
* Full UK driving licence.
* Right to work in the UK.
Whats on offer:
* Competitive salary
* 25 Days annual leave
* Life insurance
* Income Protection
* Private medical cover
* Cycle to Work Scheme
* Employee mentoring programme
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Technology company is currently looking for a Mechanical Design Engineer to join there engineering team in their offices in Buckingham. As Mechanical Design Engineer you will support design and development of new and existing products ensuring cost effective and reliable solutions. You will also be responsible for mechanical layouts, technical reviews and documentations.
Key responsibilities:
Working with product owners and other stakeholders to ensure any design is fit for purpose.
Liaison with the production team to ensure that any design is suitable for volume manufacturing.
Managing key suppliers to deliver on time and to an agreed quality.
Skills required for Mechanical Design Engineer in Buckingham:
Experience in Creo or a similar 3D CAD tool, ideally Solid Works
Extrusion, injection moulding experience
Commercial experience in a highly regulated industry, i.e. aerospace, automotive, medical, defence, or similar.
Strong experience in complexed, detailed, high precision and high tolerance designs
Good knowledge of manufacturing processes, materials, coating would be highly desirable
To hold a relevant degree in Mechanical Engineering
If you are interested in joining incredibly well-run global business that offers regular career progression please apply for this Mechanical Design Engineer role in Buckingham now.....Read more...
