Work safely and securely in compliance with given information, organisational policies and procedures, and current health, safety and welfare legislation including following the procedures for working in contaminated ground
Conform with productive working practices and completing the work in accordance with the programme of work
Interpret and follow verbal and written work instructions from supervisors and site managers
Access, interpret and use drawings and specifications
Select the required resources including tools and fixtures
Move, handle and store resources complying with relevant legislation & guidance
Use and maintain power tools and equipment (including; compactor plates, boning rods, portable power tools, levels, straight edges, lines, pins and laser equipment)
Gauge and mix mortars and concrete manually and by mixer
Select and use basic setting out equipment including tape measures, levels, straight edges, lines and pins, boning rods and laser equipment under guidance of the supervisor
Install, maintain and remove temporary protection and safety arrangements for the work area relating to barriers and temporary structures, including protection, safety notices and safety lighting
Install and test basic drainage and ducting
Measure, mark, cut and install geo-membranes to stabilise soil for re-instatement and excavations
Transport and place, then compact and finish concrete to slabs/bases, footing oversights, paths, form slab edgings including positioning reinforcement and kerbs
Set out and lay flags, paviours and edging to paths, driveways and other areas
Install ironworks relating to access covers and frames, and gully grates and frames including preparatory brickwork
Locate and excavate to expose buried utility services using electronic location instruments
Provide and remove temporary works including shallow excavation support (up to 1.2 metres)
Form and reinstate excavations and surfaces to sub-grades, sub-bases and road bases
Prepare to, then direct and guide the movement of vehicles, plant or machinery
Training:
Level 2 Groundwork Apprenticeship Standard
If required Level 2 Functional Skills in maths or English
1 week blocks each month at Campus in Croydon.
Accommodation, Travel, Breakfast & Evening meals included for these block weeks.
Training Outcome:Once the apprenticeship has been completed, the apprentice can expect to work full-time as an experienced groundworker, but they may also look at opportunities to progress as a setting out engineer or a Civil Engineering Management Qualification. Employer Description:CoTrain is a program under SECBE .
As a shared apprenticeship scheme and a Flexible Job Apprenticeship Agency partly funded by CITB to provide a route into industry for anyone wishing to complete an apprenticeship. We employ and mentor the apprentice and place them with our construction partners and colleges to gain the correct experience & skills to complete their qualifications.Working Hours :07.30 to 17.30 Monday - Friday summertime hours.
08.00 to 16.30 Monday - Friday wintertime hours.
At this time, no evenings or weekends expected.Skills: Communication skills,Attention to detail,Customer care skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
Assist in designing, building, and testing automation workflows using platforms such as Microsoft Power Automate, n8n, and custom APIs
Support the integration of AI tools and large language models (LLMs) into internal systems and client environments
Help monitor, maintain, and improve existing automated workflows to ensure reliability and performance
Provide first-line IT support for client systems, including cloud services (Microsoft 365, Azure, Google Workspace) and network devices
Contribute to documentation of automations, scripts, and system processes
Assist senior engineers in implementing new tools and solutions to enhance operational efficiency
Participate in R&D projects exploring AI-driven tools and business process automation opportunities
Collaborate closely with the technical team to troubleshoot and resolve IT and automation-related issues
Training:Why choose our AWS Cloud Support Specialist Level 3 programme?
The AWS Cloud Support Specialist apprenticeship allows you to recruit fresh cloud talent or upskill your existing workforce to become work-ready first-line IT support, specialising in AWS and cloud management. An AWS Cloud Support Specialist’s role is desk-based and revolves around system user queries and resolving faults in a helpdesk environment. AWS Cloud Support Specialists are expected to rectify or escalate faults swiftly, to mitigate internal and external impact.
The AWS Cloud Support Specialist Level 3 Apprenticeship enables the apprentice to:
Understand how to carry out a methodical approach to problem -solving
Become aware of the key organisational, cultural and health and safety considerations required by AWS Cloud Support Specialists
Comprehend core networking principles, including network addressing, Cloud, Virtualisation and Security
Gain a fundamental understanding of operating system concepts in cloud-based environments
Grasp the concept of cloud-enabled systems, secure integration, disaster recovery, principles of test plans and automation tools.
Tools and technologies learned:
Learners will learn to use AWS
Training Outcome:You will work closely with the IT Tech team and management, gaining the skills and experience to progress into an Apprentice Automation Engineer or IT Systems Technician role
Upon successful completion of the apprenticeship, there may be an opportunity to secure a full-time position if available at the time with continued professional development, vendor certifications, and exposure to cutting-edge AI and automation technologies.Employer Description:At Iconology Ltd, we are a forward-thinking Managed Service Provider (MSP) based in Kent, delivering outstanding IT, automation, and AI-driven solutions to clients across diverse industries.
At Iconology, dedication and initiative are recognised and rewarded. As our business continues to grow, so do the opportunities for career progression and personal development. If you’re passionate about technology, automation, and innovation — and you’re eager to learn in a fast-paced, team-driven environment, apply today!Working Hours :Monday - Friday, 9.00am - 5.30pm (out-of-hours may be requested with notice as overtime).Skills: Communication skills,IT skills,Problem solving skills,Analytical skills,Team working....Read more...
JOB DESCRIPTION
Location: New Orleans, LA
Summary:
Ready to hit the road and make a real impact? As a Field Technical Service Engineer, you'll be the front-line expert supporting job startups, inspecting coatings, and solving challenges in the field. You'll also contribute to in-house testing, equipment upkeep, and product evaluations-helping drive innovation and excellence in protective coatings.
Minimum Requirements:
High School Diploma or equivalent 2-year college Chemistry or minimum 5 years Technical Service experience Valid Driver's License Valid Passport NACE Certified CIP preferred (Level 1, Level 2, or Level 3), or ability to obtain within 6 months.
Physical Requirements:
Occasional physical activity required. Ability to lift up to 75 lbs. Extended computer usage (up to 8 hours/day) Must be able to climb and meet 1A Ladder requirements. Occasional exposure to chemicals Travel required 50%+, including nights and weekends. Must pass and maintain respirator fit test requirements.
Essential Functions:
Prepare coating panels with precision and care-laying the foundation for high-performance testing. Confidently operate and maintain a variety of tools and equipment, including hand tools, power tools, abrasive blast cabinets, and pin welders. Document and track panel performance to ensure accurate and reliable testing outcomes. Execute certified spray applications for nuclear testing orders with attention to detail and safety. Take charge of routine field jobs, providing expert guidance and technical support to ensure smooth operations. Collaborate with customers and sales teams to gather critical job data and prepare for successful field visits. Lead hands-on demonstrations of mixing equipment, airless and conventional spray systems-showcasing best practices for applying Carboline products. Interpret surface preparation standards with confidence, ensuring compliance with job specifications. Train and empower painters, inspectors, and supervisors with practical techniques and technical know-how. Support evaluations of new products and equipment, contributing to innovation and continuous improvement. Follow established procedures from the Technical Service Procedures Manual to maintain consistency and quality. Champion the Company's safety and quality programs, setting the standard for excellence in the field.
Who We Are: Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer: We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online!....Read more...
We are currently seeking a Technical Assistant with either an electrical or mechanical engineering bias. This is an exceptional opportunity for an early-career engineer to gain exposure across multiple engineering disciplines while supporting the delivery of complex, high-value projects within a secure environment.
The role offers a unique platform for candidates to explore different areas of the business, understand their strengths, and develop a long-term career path in a highly supportive engineering environment.
The Role
The successful candidate will assist in maintaining and enhancing engineering designs across a range of programmes, acting as a vital link between engineering teams and wider business functions. Working under the guidance of senior engineers, they will contribute to a variety of hands-on and documentation-focused activities that support project delivery.
Responsibilities
Collaborating with engineering and project teams to support successful project outcomes.
Acting as a key liaison between engineers and internal departments to progress actions and tasks.
Supporting a variety of engineering activities, including:
Writing method statements
Preparing test specifications
Implementing Engineering Change Requests (ECRs)
Supporting change management processes
Updating drawings
Occasional site-based work
Participating in internal and external meetings to support project progression.
Maintaining accurate and organised engineering documentation in line with internal procedures.
Essential Skills & Experience
Level 3 Engineering qualification or completed engineering apprenticeship (electrical or mechanical bias).
Strong communication skills and confidence liaising across engineering and non-engineering teams.
A collaborative team player with a strong work ethic.
Proficiency with MS Office tools.
Quick learner with a flexible and adaptable approach to varied engineering tasks.
Methodical, diligent, and accurate approach to work.
Ability to organise and prioritise own workload following higher-level direction.
Ability to communicate effectively with stakeholders at all levels, including suppliers and customers.
Enthusiastic attitude with a desire to learn and grow within the organisation.
Desirable
Knowledge of engineering principles relevant to chosen bias (electrical or mechanical).
Experience supporting the design, assembly, testing, or delivery of complex technical systems.
Familiarity with recognised design tools (e.g., electrical design software or SolidWorks for mechanical).
Ambition to progress into a specialist, engineering, or supervisory role as experience grows.
Security Requirements
Due to project sensitivities, applicants must meet the relevant UK security vetting standards and must be sole British nationals.
....Read more...
