Electrical CAD Designer is responsible for preparing and maintaining engineering or sustaining project design layouts and PCB???s.
Skills
Several years experience in a relevant or similar role in a Technology or Manufacturing Centre
Electrical CAD PCB Design.
Electronics Design.
Product File Management.
Cadence or Altium Software ideal.
What you will be doing
Function as a design engineer for routine/correction.
Depending on seniority, use the CAD system to prepare and maintain simple to average complexity electrical and electronic layouts, average complexity mechanical and highest complexity electrical and electronic product and production drawings and other related documentation from layouts, sketches or verbal instruction.
Responsible for the accuracy of assignments, except for design features that are the responsibility of the project engineer.
Understand manufacturing processes and techniques, and interpretation of company standards and procedures.
Possesses basic knowledge of the mechanical and, depending on the seniority, partial to total knowledge of the electrical and electronic Product Line.....Read more...
Electrical CAD Designer is responsible for preparing and maintaining engineering or sustaining project design layouts and PCB???s.
Skills
Several years experience in a relevant or similar role in a Technology or Manufacturing Centre
Electrical CAD PCB Design.
Electronics Design.
Product File Management.
Cadence or Altium Software ideal.
What you will be doing
Function as a design engineer for routine/correction.
Depending on seniority, use the CAD system to prepare and maintain simple to average complexity electrical and electronic layouts, average complexity mechanical and highest complexity electrical and electronic product and production drawings and other related documentation from layouts, sketches or verbal instruction.
Responsible for the accuracy of assignments, except for design features that are the responsibility of the project engineer.
Understand manufacturing processes and techniques, and interpretation of company standards and procedures.
Possesses basic knowledge of the mechanical and, depending on the seniority, partial to total knowledge of the electrical and electronic Product Line.....Read more...
Electrical Design Engineer required to join a team working on Low Voltage and High Voltage switchgear solutions from wiring diagram, schematics, and layout drawings.
You will have over two years switchgear experience in electrical design, with strong knowledge of HV or LV power distribution systems and circuit breakers. Proficiency in AutoCAD or similar CAD software is essential, as well as the ability to work on multiple projects simultaneously. Protection relays and power circuit monitoring equipment is also highly beneficial.
Role
Develop electrical design concepts for switchgear projects over 10kV.
CAD drawing.
Support to the Test Department and manage project documentation.....Read more...
Electrical Design Engineer required to join a team working on Low Voltage and High Voltage switchgear solutions from wiring diagram, schematics, and layout drawings.
You will have over two years switchgear experience in electrical design, with strong knowledge of HV or LV power distribution systems and circuit breakers. Proficiency in AutoCAD or similar CAD software is essential, as well as the ability to work on multiple projects simultaneously. Experience with protection relays and power circuit monitoring equipment is also highly beneficial.
Role
Develop electrical design concepts for switchgear projects over 10kV.
CAD drawing
Support to the Test Department and manage project documentation ....Read more...
Electrical Design Engineer required to join a team working on Low Voltage and High Voltage switchgear solutions from wiring diagram, schematics, and layout drawings.
You will have over two years switchgear experience in electrical design, with strong knowledge of HV or LV power distribution systems and circuit breakers. Proficiency in AutoCAD or similar CAD software is essential, as well as the ability to work on multiple projects simultaneously. Protection relays and power circuit monitoring equipment is also highly beneficial.
Role
Develop electrical design concepts for switchgear projects over 10kV.
CAD drawing.
Support to the Test Department and manage project documentation.....Read more...
Electrical Design Engineer required to join a team working on Low Voltage and High Voltage switchgear solutions from wiring diagram, schematics, and layout drawings.
You will have over two years switchgear experience in electrical design, with strong knowledge of HV or LV power distribution systems and circuit breakers. Proficiency in AutoCAD or similar CAD software is essential, as well as the ability to work on multiple projects simultaneously. Experience with protection relays and power circuit monitoring equipment is also highly beneficial.
Role
Develop electrical design concepts for switchgear projects over 10kV.
CAD drawing
Support to the Test Department and manage project documentation ....Read more...
Position: System Design Engineer
Job ID: 2394/7
Location: Redhill, Surrey
Rate/Salary: Competitive
Benefits
Annual Bonus, Private Healthcare, Company pension, Sick Pay, On-site Parking, On-site gym at the HQ, 25 days holiday plus Bank Holidays
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: System Design Engineer
Typically, this person will:
Work alongside engineering and project teams to produce electrical and mechanical drawings. The role demands a thorough understanding of relevant technical standards and electrical regulations, including BS7671 (18th Edition) wiring regulations and the Electricity at Work Act. The System Design Engineer will develop design concepts from first principles, prepare detailed 2D and 3D CAD drawings, and ensure compliance with manufacturing techniques and material properties. They will take ownership of assigned tasks, making proactive decisions and managing priorities effectively to meet tight deadlines in a fast-paced environment.
HSB Technical’s client is an established and well-regarded business entity operating in a technical and regulatory-compliant environment.
Duties and responsibilities of the System Design Engineer:
Produce high-quality electrical and mechanical design drawings in accordance with recognised drawing standards such as BS8888:2017.
Ensure all designs comply with BS7671 (18th Edition) wiring regulations, the Electricity at Work Act, and relevant EU electrical safety directives.
Develop detailed design concepts with strong engineering design skills and a good understanding of manufacturing techniques and material properties.
Produce accurate 2D and 3D CAD drawings adhering to ISO standards using a CAD tool of choice (candidate input on software selection welcomed).
Create STEP files for customer/client transfer as required.
Prepare Visio diagrams to support company-wide documentation needs.
Apply expertise in the design and manufacture of electrical enclosures such as control panels and 19” racks.
Collaborate effectively with internal departments, sub-contractors, suppliers, and external customers to ensure positive project outcomes.
Take ownership of tasks and deliver outputs proactively and independently, prioritising work efficiently to meet deadlines.
Adapt to changing priorities and handle uncertainty within the scope of the role.
Qualifications and requirements for the System Design Engineer:
Minimum qualification of HND, HNC, apprenticeship, or equivalent relevant engineering certification.
At least four years of experience producing electronic and mechanical drawings in significant quantities; ideally five years in electrical/systems design.
Proficient user of CAD software such as AutoCAD; experience with electrical CAD tools (e.g., SEE Electrical or ETAP) is advantageous.
Strong knowledge of BS7671 (18th Edition) wiring regulations, EMC, and LVD standards is essential.
Experience working within an electrical engineering regulatory environment for installations.
Ability to produce a consistently high standard of work meeting or exceeding customer requirements.
Strong problem-solving skills and the ability to work autonomously with minimal supervision.
Demonstrable "can-do" mentality with resilience to manage workload under pressure and tight deadlines.
Eligibility to hold SC Security Clearance or ability to obtain it.
Competent with standard office applications and remote working tools.
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
We're offering an exciting opportunity for a skilled and motivated Dental Technician / Dental Lab Manager to join a modern, forward-thinking dental clinic in Stockport. You'll be working in a fully digital lab environment with cutting-edge technology, focusing on full-arch implant restorations and crown & bridge work.
This full-time role has salary range of £30,000 - £60,000 and benefits. Candidates must have strong digital skills and experience using CAD/CAM design software, ideally Exocad or similar.
Key Responsibilities:
? Design and manufacture dental restorations using Exocad and CAD/CAM systems
? Produce All-On-X full arch implant and crown & bridge solutions.
? Operate advanced dental milling machines and 3D printers.
? Collaborate closely with clinicians and other dental professionals.
? Maintain high standards in digital dental production and lab operations.
Requirements:
? Previously worked as a Dental Technician, Dental Technologist, Lab Technician, Laboratory Technician or in a similar role.
? GDC registered Dental Technician or Dental Lab Manager.
? 3-4 years of experience in a dental lab environment.
? Minimum 2 years of CAD/CAM and digital workflow experience.
? Experience using CAD/CAM design software, ideally Exocad or similar.
? Right to work in the UK.
What's on Offer:
? Competitive salary: £30,000 - £60,000 depending on experience
? Company pension
? Free on-site parking
? Career development and long-term progression in a growing digital lab
? Job security and training opportunities
? All-expenses-paid visit to Bulgaria as part of the hiring process
Apply now for this outstanding Dental Technician opportunity to advance your career in a supportive and innovative digital lab environment.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relati....Read more...
We're offering an exciting opportunity for a skilled and motivated Dental Lab Manager / Dental Technician to join a modern, forward-thinking dental clinic in Stockport. You'll be working in a fully digital lab environment with cutting-edge technology, focusing on full-arch implant restorations and crown & bridge work.
This full-time role has salary range of £30,000 - £60,000 and benefits. Candidates must have strong digital skills and experience using CAD/CAM design software, ideally Exocad or similar.
You will be responsible for:
? Design and manufacture dental restorations using Exocad and CAD/CAM systems
? Produce All-On-X full arch implant and crown & bridge solutions.
? Operate advanced dental milling machines and 3D printers.
? Collaborate closely with clinicians and other dental professionals.
? Maintain high standards in digital dental production and lab operations.
What we are looking for:
? Previously worked as a Dental Technician, Dental Technologist, Lab Technician, Laboratory Technician or in a similar role.
? GDC registered Dental Technician or Dental Lab Manager.
? 3-4 years of experience in a dental lab environment.
? Minimum 2 years of CAD/CAM and digital workflow experience.
? Experience using CAD/CAM design software, ideally Exocad or similar.
? Right to work in the UK.
What's on Offer:
? Competitive salary
? Company pension
? Free on-site parking
? Career development and long-term progression in a growing digital lab
? Job security and training opportunities
? All-expenses-paid visit to Bulgaria as part of the hiring process
Apply now for this outstanding Dental Lab Manager opportunity to advance your career in a supportive and innovative digital lab environment.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either b....Read more...
Automotive Electronics Principal / Team Lead with strong Powertrain experience to lead a team charged with the design and integration of high voltage battery pack and systems for hybrid or electric vehicles.
Skills and Experience
Design and development of high voltage battery pack and high voltage systems hardware for hybrid and/or electric vehicles.
Hybrid and electric powertrain systems at vehicle, system and component levels.
NX CAD software.
Teamcenter for data management.
BOM definition and maintenance.
DFMEAs.
Responsibilities
3D concept design generation of high voltage battery pack and high voltage systems hardware.
Generation of system specification, and be responsible for delivery of hardware that meets system targets
Creation of detailed 3D CAD models and 2D drawings of high voltage battery pack and high voltage systems hardware
Lead the package integration of high voltage battery pack and high voltage systems
Tolerance studies....Read more...
Automotive Electronics Principal / Team Lead with strong Powertrain experience to lead a team charged with the design and integration of high voltage battery pack and systems for hybrid or electric vehicles.
Skills and Experience
Design and development of high voltage battery pack and high voltage systems hardware for hybrid and/or electric vehicles.
Hybrid and electric powertrain systems at vehicle, system and component levels.
NX CAD software.
Teamcenter for data management.
BOM definition and maintenance.
DFMEAs.
Responsibilities
3D concept design generation of high voltage battery pack and high voltage systems hardware.
Generation of system specification, and be responsible for delivery of hardware that meets system targets
Creation of detailed 3D CAD models and 2D drawings of high voltage battery pack and high voltage systems hardware
Lead the package integration of high voltage battery pack and high voltage systems
Tolerance studies....Read more...
Join a Design Dream Team as a Junior CAD Technician! Bring buildings and spaces to life through innovative design and cutting-edge technology. Our clients team of experts works together to turn ideas into tangible realities that exceed their clients' expectations. They're not just building structures, they're crafting experiences. Overview of the Job: As a Junior CAD Technician, you'll be the blueprint to their success! You'll play a key role in turning conceptual designs into detailed technical drawings. Your technical skills and attention to detail will help us turn big ideas into even bigger projects. Here's what you'll be doing:Creating detailed technical drawings using AutoCADCollaborating with architects and engineers to ensure design accuracyReviewing and updating drawings as neededParticipating in project meetings and presenting your workHere are the skills you'll need:Proficient in AutoCADKnowledge of drafting and design principlesStrong verbal and written communication skillsA team player with a keen eye for detailHere are the benefits of this job:The chance to bring your ideas to life and make a real impactOpportunities for professional growth and developmentA dynamic, supportive and fun work environmentCompetitive salary and benefits packageWhy a career in this sector is good: A career in design and technology is not just about building structures, it's about building a better world. As a Junior CAD Technician, you'll have the opportunity to work on projects that make a difference and contribute to the built environment. And let's not forget, you'll be part of a team of experts who love what they do and have a blast doing it! If you're ready to turn your technical skills into a career, apply now!....Read more...
What you will do:
Create CAD drawings for smart home, cinema, and AV projects
Assist with layouts, schematics, and technical documentation
Work with architects, designers, and engineers on exciting, high-end projects
Learn to merge technology with design for seamless lifestyle solutions
What we are looking for:
Enthusiasm for technology, design, and architecture
Interest in smart homes, cinema systems, or audio-visual tech
Keen eye for detail and willingness to learn CAD software
Great teamwork and communication skills
What you wll gain:
Full apprenticeship training in CAD and AV design
Mentorship from industry experts with 20+ years’ experience
Experience in exclusive luxury projects
A pathway to a long-term career in smart home and AV technology
Training:BTEC Level 3 Diploma in Advanced Manufacturing Engineering.
Training Outcome:Full-time position upon completion of apprenticeship.Employer Description:Lunar Skills are innovators and artists dedicated to transforming homes into a masterpiece of technology and comfort. We understand that a home is not just a place to stay, but a sanctuary where life's best moments unfold. That's why we are committed to elevating every aspect of your home living experienceWorking Hours :Monday - Friday between 9am - 5pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Design & Site Survey TechnicianLocation: Ramsgate Head Office / Various London SitesSalary: £30,000 p.a. Type: Full Time | Permanent________________________________________The RoleJoin a leading specialist in the lift industry, supporting both site surveys and design team operations. This hybrid role offers a mix of office-based technical tasks and site work, providing excellent scope for career development.________________________________________Key Responsibilities• Carry out accurate site surveys for new and existing projects.• Upload surveys into document control systems and manage workflow/WIP.• Support the Design Team with medium-priority tasks and addressing design comments.• Assist with aspects of design work (CAD training available if required).• Read and interpret architectural drawings for project delivery.• Maintain high standards of accuracy, safety and quality on all work.• Collect company vehicle from Ramsgate for site visits; drive to London projects as needed.________________________________________Working Hours• Office (Ramsgate): 08:30 – 16:30• London sites: 07:00 – 15:00• Typically, 3–4 days in office, remainder on site, dependant on work load.________________________________________Requirements• Previous experience in surveying, site measurement, or design support.• Ability to read and interpret architectural drawings (essential).• Strong organisational and time management skills.• Basic CAD knowledge desirable (training provided).• Full UK driving licence (essential).• CSCS card desirable (can be provided).________________________________________What’s on Offer• Salary of £30,000 per year (includes travel time).• Hybrid office/site role with variety and responsibility.• Training opportunities in CAD and design support.• Work within a specialist team in a growing sector.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment Agency Due to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion. ....Read more...
Design & Site Survey TechnicianLocation: Ramsgate Head Office / Various London SitesSalary: £30,000 p.a. Type: Full Time | Permanent________________________________________The RoleJoin a leading specialist in the lift industry, supporting both site surveys and design team operations. This hybrid role offers a mix of office-based technical tasks and site work, providing excellent scope for career development.________________________________________Key Responsibilities• Carry out accurate site surveys for new and existing projects.• Upload surveys into document control systems and manage workflow/WIP.• Support the Design Team with medium-priority tasks and addressing design comments.• Assist with aspects of design work (CAD training available if required).• Read and interpret architectural drawings for project delivery.• Maintain high standards of accuracy, safety and quality on all work.• Collect company vehicle from Ramsgate for site visits; drive to London projects as needed.________________________________________Working Hours• Office (Ramsgate): 08:30 – 16:30• London sites: 07:00 – 15:00• Typically, 3–4 days in office, remainder on site, dependant on work load.________________________________________Requirements• Previous experience in surveying, site measurement, or design support.• Ability to read and interpret architectural drawings (essential).• Strong organisational and time management skills.• Basic CAD knowledge desirable (training provided).• Full UK driving licence (essential).• CSCS card desirable (can be provided).________________________________________What’s on Offer• Salary of £30,000 per year (includes travel time).• Hybrid office/site role with variety and responsibility.• Training opportunities in CAD and design support.• Work within a specialist team in a growing sector.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment Agency Due to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion. ....Read more...
We're offering an exciting opportunity for a skilled and motivated Dental Technician / Dental Lab Manager to join a modern, forward-thinking dental clinic in Stockport. You'll be working in a fully digital lab environment with cutting-edge technology, focusing on full-arch implant restorations and crown & bridge work.
This full-time role has salary range of £30,000 - £60,000 and benefits. Candidates must have strong digital skills and experience using CAD/CAM design software, ideally Exocad or similar.
Key Responsibilities:
* Design and manufacture dental restorations using Exocad and CAD/CAM systems
* Produce All-On-X full arch implant and crown & bridge solutions.
* Operate advanced dental milling machines and 3D printers.
* Collaborate closely with clinicians and other dental professionals.
* Maintain high standards in digital dental production and lab operations.
Requirements:
* Previously worked as a Dental Technician, Dental Technologist, Lab Technician, Laboratory Technician or in a similar role.
* GDC registered Dental Technician or Dental Lab Manager.
* 3-4 years of experience in a dental lab environment.
* Minimum 2 years of CAD/CAM and digital workflow experience.
* Experience using CAD/CAM design software, ideally Exocad or similar.
* Right to work in the UK.
What's on Offer:
* Competitive salary: £30,000 - £60,000 depending on experience
* Company pension
* Free on-site parking
* Career development and long-term progression in a growing digital lab
* Job security and training opportunities
* All-expenses-paid visit to Bulgaria as part of the hiring process
Apply now for this outstanding Dental Technician opportunity to advance your career in a supportive and innovative digital lab environment.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
We're offering an exciting opportunity for a skilled and motivated Dental Lab Manager / Dental Technician to join a modern, forward-thinking dental clinic in Stockport. You'll be working in a fully digital lab environment with cutting-edge technology, focusing on full-arch implant restorations and crown & bridge work.
This full-time role has salary range of £30,000 - £60,000 and benefits. Candidates must have strong digital skills and experience using CAD/CAM design software, ideally Exocad or similar.
You will be responsible for:
* Design and manufacture dental restorations using Exocad and CAD/CAM systems
* Produce All-On-X full arch implant and crown & bridge solutions.
* Operate advanced dental milling machines and 3D printers.
* Collaborate closely with clinicians and other dental professionals.
* Maintain high standards in digital dental production and lab operations.
What we are looking for:
* Previously worked as a Dental Technician, Dental Technologist, Lab Technician, Laboratory Technician or in a similar role.
* GDC registered Dental Technician or Dental Lab Manager.
* 3-4 years of experience in a dental lab environment.
* Minimum 2 years of CAD/CAM and digital workflow experience.
* Experience using CAD/CAM design software, ideally Exocad or similar.
* Right to work in the UK.
What's on Offer:
* Competitive salary
* Company pension
* Free on-site parking
* Career development and long-term progression in a growing digital lab
* Job security and training opportunities
* All-expenses-paid visit to Bulgaria as part of the hiring process
Apply now for this outstanding Dental Lab Manager opportunity to advance your career in a supportive and innovative digital lab environment.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting and a fantastic opportunity for a Senior Electronics Design Engineer in an automotive component manufacturing company based in Buckingham. The company manufactures exterior lightings for top automotive brands.
Candidate requirements
Senior design of low and high volume PCB manufacturing process.
Experience in Simulation tolls like ASPICE.
Knowledge of full electronic development cycle.
CAD
Experience in component level electronic design.
Experience in LED lighting systems desired.
Knowledge of EMC design and testing.....Read more...
An exciting and a fantastic opportunity for a Senior Electronics Design Engineer in an automotive component manufacturing company based in Buckingham. The company manufactures exterior lightings for top automotive brands.
Candidate requirements
Senior design of low and high volume PCB manufacturing process.
Experience in Simulation tolls like ASPICE.
Knowledge of full electronic development cycle.
CAD
Experience in component level electronic design.
Experience in LED lighting systems desired.
Knowledge of EMC design and testing.....Read more...
DESIGN ENGINEER Location: SandbachSalary: £28,000 - £40,000
Are you an experienced Design Engineer with expertise in AutoCAD, Inventor or Solidworks? We are thrilled to present an exclusive opportunity to join our prestigious manufacturing client based in Sandbach. As their trusted recruitment partner, we are seeking a talented individual to join their CAD team due to their continued success and increasing demand for their exceptional products.
About the Role: As a Design Engineer, you will play a vital role within a collaborative team environment. Your primary responsibility will be to create technical drawings that precisely adhere to customer specifications, ensuring seamless production by the manufacturing team. Key aspects of the role include:
Utilising AutoCAD, Inventor and Solidworks to produce accurate and detailed drawings.
Developing scheme drawings and layouts for evaluation against customer requirements.
Generating manufacturing drawings with an emphasis on cost-effectiveness and ease of production.
Collaborating closely with colleagues across departments to ensure efficient project execution.
Key Requirements:
Proven experience as a Design Engineer, CAD Technician or other 3D Design role in a manufacturing environment.
Proficiency in AutoCAD, Autodesk Inventor or Solidworks.
Demonstrated ability to create high-quality manufacturing drawings.
Excellent communication skills, fostering effective collaboration with colleagues and customers.
Motivated, positive, and enthusiastic attitude towards work.
Proficiency in Microsoft Office and Google Docs, including spreadsheet management and Excel formulas.
How to Apply: If you are an experienced Design Engineer/CAD Technician seeking an exciting opportunity to contribute to a highly successful manufacturing company, we want to hear from you!Please submit your CV through this advertisement for immediate consideration.
By sending an application or applying for a job, you consent to your personal data being processed and stored by Get Recruited (UK) Ltd in accordance with our Cookie & Privacy Policy (available in the footer on our website). Get Recruited (UK) Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. We are an equal opportunities employer and we never charge candidates a fee for our services.....Read more...
We’re looking for a skilled and passionate Mechanical Design Engineer to join our growing engineering team in Saffron Walden. This is a fantastic opportunity to apply your mechanical and electromechanical design expertise to develop innovative products across dynamic and evolving markets.
Key Responsibilities of the Mechanical Design Engineer job in Saffron Walden:
Design components, systems, and products using 3D CAD software, creating models, drawings, BOMs, and documentation.
Support new product development and legacy product maintenance, delivering high-quality mechanical solutions.
Collaborate across teams to meet project deadlines and customer specifications, including technical presentations and workshops.
Conduct research and technical investigations, supporting the product development process from concept to production.
Apply principles of mechanics, materials, heat transfer, and electromechanical design to create robust and cost-effective solutions.
Develop test methods, evaluate prototypes, and ensure products meet industry standards, directives, and environmental requirements.
Generate and maintain engineering documentation including datasheets, leaflets, and product literature.
Engage with customers and represent the company at meetings, exhibitions, and site visits (UK and internationally).
Required Skills & Qualifications of the Mechanical Design Engineer job in Saffron Walden:
Degree in Mechanical Engineering or related discipline (or equivalent industry experience).
Proficiency in 3D CAD design (SolidWorks preferred but not essential).
Strong conceptual design and technical documentation skills.
Understanding of relevant safety and compliance standards (e.G., LVD, Machinery Directive).
Experience with FMEA, FMECA, or risk-based design analysis.
Technical enthusiasm, excellent problem-solving ability, and quality-focused mindset.
Confident in presenting technical information and collaborating across departments.
Willingness to travel within the UK and globally as required.
If this Mechanical Design Engineer job in Saffron Walden could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471 181784.....Read more...
An opportunity for an experienced Mechanical Design Engineer to join a Medical Equipment Design and Development company based in Suffolk. They have been developing leading medical technology products to some of the biggest names in pharmaceutical sectors. You will be joining a compact, versatile and supremely agile ambitious team.
Key skills and responsibilities
Mechanical CAD design.
Degree in Mechanical Engineering.
SolidWorks.
Working experience in Mechanical Designing.
Read, understand and generate technical instructions, material lists.
Design verification testing.
Recording and filing test reports.....Read more...
An opportunity for an experienced Mechanical Design Engineer to join a Medical Equipment Design and Development company based in Suffolk. They have been developing leading medical technology products to some of the biggest names in pharmaceutical sectors. You will be joining a compact, versatile and supremely agile ambitious team.
Key skills and responsibilities
Mechanical CAD design.
Degree in Mechanical Engineering.
SolidWorks.
Working experience in Mechanical Designing.
Read, understand and generate technical instructions, material lists.
Design verification testing.
Recording and filing test reports.....Read more...
A leading maritime systems integrator is seeking a System Design Engineer to join their multidisciplinary engineering team. This is a fantastic opportunity to work across high-impact defence and commercial projects, supporting the design and delivery of advanced communications and control systems for complex operational environments.
Key Responsibilities
- Produce high-quality electrical and mechanical drawings (2D/3D) for maritime, defence, and critical systems projects.
- Translate rough concepts into fully defined engineering drawings and STEP files to ISO and BS8888 standards.
- Contribute to system-level designs involving control panels, 19 rack layouts, and enclosure manufacturing.
- Ensure compliance with industry standards, including EMC, LVD, BS7671, and the Electricity at Work Act.
- Support equipment and system documentation in line with EU directives and safety requirements.
- Collaborate closely with engineering, project, and customer teams to ensure designs meet functional and compliance needs.
Requirements
- HNC/HND, apprenticeship, or equivalent in electrical/electronic or systems engineering.
- Minimum 45 years of experience in electrical/systems design and mechanical drafting.
- Proficient in CAD tools (AutoCAD or equivalent); experience with Electrical CAD packages like SEE Electrical or ETAP is a plus.
- Strong understanding of electrical design principles, manufacturing methods, and material properties.
- Experience working within regulatory and compliance frameworks (BS7671, EMC/LVD standards).
- Confident working autonomously and balancing multiple priorities in a fast-paced environment.
- Eligible for or already hold SC (Security Check) clearance.
Why Apply?
This is an excellent opportunity to be part of a forward-thinking engineering team working on mission-critical systems for maritime and defence sectors. Youll take ownership of meaningful design work, contribute to innovative projects, and help shape how cutting-edge technology is delivered in real-world environments.....Read more...
Mechanical Engineer – Defence Systems
Location: Chertsey, Surrey
An excellent opportunity for a Mechanical Engineer to join a leading UK defence engineering business, specialising in the design, development, and support of cutting-edge military systems. This role offers exposure to the full product lifecycle, from concept through to production, supporting high-profile projects in one of the most demanding engineering environments.
This position is ideal for a collaborative engineer with strong CAD design experience and a passion for practical problem-solving, who can contribute across multiple projects and deliver high-quality, reliable solutions.
Main Responsibilities of the Mechanical Engineer based in Chertsey, Surrey:
Assist and liaise with project teams on mechanical aspects of products and systems.
Design bespoke equipment in accordance with defence standards.
Select suitable materials, manufacturing processes, and integration methods.
Provide technical advice to suppliers and internal teams to ensure product quality.
Conduct testing to demonstrate compliance with defence and international standards.
Support production and quality teams to ensure delivery meets design intent.
Troubleshoot and resolve integration issues, including on-site support when required.
Maintain accurate design documentation and ensure traceability.
Contribute to design reviews and continuous improvement initiatives.
Requirements of the Mechanical Engineer based in Chertsey, Surrey:
Degree or equivalent qualification in Mechanical Engineering (HND/HNC considered).
Proven experience in a mechanical design or manufacturing environment.
Proficiency in 3D CAD (Inventor preferred, others considered) and 2D drawings to BS EN8888 or equivalent.
Understanding of stress analysis, FEA (Nastran preferred), and GD&T.
Knowledge of materials, manufacturing processes, and IP-rated design.
Strong problem-solving skills and attention to detail.
Excellent communication skills and ability to work across multiple projects.
Familiarity with PDM systems (Autodesk Vault preferred) and task monitoring tools (e.G., JIRA).
To apply for this Mechanical Engineer role based in Chertsey, Surrey, please send your CV to:
Kchandarana@redlinegroup.com or call 01582 878 830 / 07961 158 784....Read more...
