As part of your apprenticeship, you’ll gain hands-on experience in electrical installations, servicing, and maintenance, working alongside experienced electricians and other professionalsDaily Duties & Responsibilities:
Attend College Day Release: Participate in all scheduled college training sessions and complete the necessary coursework and assignments for your apprenticeship
Assisting with Installations & Maintenance: Support your assigned Line Manager/mentor in the installation, repair, and ongoing maintenance of electrical systems across residential, commercial, and industrial properties
Fault Diagnosis and Repair: Assist in identifying and troubleshooting electrical faults, and help with the repair of electrical systems in various settings
Electrical System Installation: Assist with the installation and maintenance of lighting, power distribution networks, and other electrical systems for new builds or renovations
Ensuring Compliance: Help ensure that all electrical installations meet the relevant local codes, standards, and regulations
Adhering to Safety Procedures: Follow established safety protocols to maintain a safe working environment and minimise risk during all electrical tasks
Conducting Safety Inspections: Assist in performing safety inspections of electrical systems to verify compliance with regulatory requirements
System Upgrades and Replacements: Support the replacement of outdated wiring and electrical components to ensure systems meet the latest safety standards and performance expectations
Training:
You will be pursuing a Level 3 Apprenticeship Standard as Installation Electrician, through Weston College
As part of this program, you will attend Weston College as instructed by the college
An assessor will conduct on-site observations to evaluate your progress, as well as support you in college throughout your apprenticeship
At the conclusion of your program, your qualification will be assessed through an End Point Assessment
Training Outcome:We would like to see all our apprentices moving on to have their own team when they are fully qualified,Employer Description:A family run business based in North Somerset but covering the South of England and Wales.
Our company Specialises in the following: Air Source Heating, Solar PV, Underfloor Heating, Electric Car charging, Battery storage and Air Conditioning.
We were runners-up for 2 awards in the Energy Efficiency Awards 2025. Firstly in the category of Regional Renewable Heat Installer and Contractor of the Year and secondly, for Regional Renewable Heat Installer and Contractor of the year. We are also an accredited member of HIES, Trading Standard Approved, we hold the Government Endorsed Trustmark, MCS Certified. We are also a Which? Trusted Trader and Trustpilot member.Working Hours :Monday to Friday: 8:30am-5pm
Breaks and lunchtime: 1 hour.Skills: Communication skills,Problem solving skills,Team working,Initiative,Physical fitness,Passion,Reliability....Read more...
Repair a range of electrical equipment.
Support and work to project needs, including fault-finding and repair on a range of equipment, AC and DC electric motors, fans, generators, alternators, integrated pumps, geared motors, test equipment, automated winding machines, rewind electrical stators/armatures.
Test and analyse motors and generators.
Training:
You will work towards achieving a Level 3 advanced Engineering Fitter apprenticeship, attending NWTC Training Centre on day release, for training and Further Education.
Training Outcome:
At the end of the apprenticeship, candidates will be suitably trained and continue their employment depending on the business needs at the time.
Further in-house and external training and development are available.
Employer Description:Established in 1946 by J I Windsor, Rewinds & J. Windsor, one of the largest independently owned electric motor and rotating equipment repairers in the UK. From mechanical and electrical repairs to electrical manufacturing and sales at Rewinds & J. Windsor, we have been setting the standards for engineering solutions for over 60 years. The back bone of our business has always been electrical and mechanical repairs.Working Hours :Monday - Friday. Start 8am and Finish 4.30pm with half hour unpaid lunch.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
The apprentice will be paired with an engineer every day and will be expected to assist in carrying out tasks such as:
Electrical inspections.
Electrical testing.
Fault finding.
Repairs or replaces drives, transformers, motors and hydraulic and gas electrical controls.
Installs, repairs or replaces generators and industrial storage batteries.
Corrects connections and wiring on equipment controls.
Works on electrical failures & replaces components.
Installs electrical circuits and panels.
Our apprentices are expected:
To understand safe practices of working and always work in accordance with Dalkia’s health and safety policies.
To act professional at all times, including when on customer premises.
Attend site visits and inspections, support with getting the sites ready for inspections and working with the Health and Safety team to ensure site documentation is up to date.
Ensure our client’s equipment complies with current safety documentation and legislation.
Take part in all apprentice activities planned by the company (e.g. annual apprentice event).
To take a proactive approach to their learning while on site and be vocal in what they would like to have exposure to. Adhere to Company Values, Policies, and procedures including but not limited to Health and Safety.
Training:
As well as guided on the job training specific to our organisation you will study towards your level 3 Installation and Maintenance Electrical apprenticeship.
You will attend college on day release during term time.
A tutor will be assigned to you and you will receive protected study time within the workplace.
You will also get support from our apprenticeship team through mentoring and buddying.
Functional Skills level 2 in English and maths if required.
Training Outcome:As an Apprentice Electrical Engineer, there are exciting future prospects including career progression to roles such as Electrical Engineer, Electrical Appointed Person, Supervisor, opportunities for further education and professional certifications. Your apprenticeship equips you with valuable skills, including life skills, paving the way for a diverse range of career paths. The key to your success lies in continuous learning, gaining experience, and embracing new opportunities.Employer Description:EDF Energy is a British integrated energy company, wholly owned by the French state-owned EDF, with operations spanning electricity generation and the sale of natural gas and electricity to homes and businesses throughout the United Kingdom.
Dalkia Facilities Ltd is a subsidiary of EDF Energy Ltd.
Everything we do is in service to our clients and their customers. We continuously find new and better ways of working to help our clients overcome the challenges of today and tomorrow.
We partner with our clients and are committed to realise their ambitions and deliver solutions to meet their needs. We are upfront, honest and act with integrity. By staying curious and pushing ourselves to find new and better ways of doing things, we’re constantly innovating, creating quality and adding value for our clients at every stage.Working Hours :Monday - Friday, 8.00am - 5.00pm with an hour for lunch.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Physical fitness,Mechanically minded,Motivated to learn and succeed,Good time management abilities,A positive attitude....Read more...
The Electrician Apprentice supports Electricians in the maintenance, operation and repair of electrical systems
Assist with and perform installation and maintenance tasks in order to ensure the effective operation of various electrical equipment
Learning from the master electrician and completing all assigned duties
Identifying, analysing, troubleshooting, and assisting with repairs of equipment and electrical faults
Traveling out to various public and private spaces to assist the master electrician
Interpreting construction drawings and schematics
Updating work logs, client accounts, and handling other administrative duties
Completing electrical installations and carrying out various maintenance duties
Communicating with clients in a professional, courteous manner at all times
Attend college for off the job training as part of the apprenticeship
Training:
Installation and Maintenance Electrician Level 3 Apprenticeship Standard
Training Outcome:
Upon completing your apprentice you will be a fully qualified electrician with valuable renewable energy training
We progress internal meaning additional qualifications including testing and inspecting, ev and solar qualifications will be issued
Employer Description:We are a multi award winning electrical contracting firm based in Cambridge with a strong involvement in renewables. We are employed by some of the largest companies in Cambridge to undertake critical projects whilst also carrying out our own.
We are rapidly expanding and therefore need a candidate who can learn quicklyWorking Hours :Monday - Friday, 8.00am - 4.00pmSkills: Communication skills,Problem solving skills,Logical,Team working,Creative....Read more...
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
We are currently seeking an experienced Electrical Maintenance Team Leader to join a market-leading PLC listed manufacturer based in the Arnold area of Nottingham. This Electrical Maintenance Team Leader vacancy offers a salary of up to £58,200, company pension matched to 10%, generous holiday allowance, annual production bonus and overtime opportunities.The company offers excellent training and development with career progression opportunities, including upskilling and cross-skilling, etc., as they continue to invest in their people to align with numerous large-scale CapEx investments, with further site development planned for the factory’s future.
What’s in it for you as an Electrical Maintenance Team Leader:Competitive Salary: Basic salary circa £58.2k per annumAttractive Benefits: Matched pension up to 10%, share options, premium overtime rates, and an extensive benefits programme (including a cycle-to-work scheme and shopping discounts)Shift Pattern: Days & Nights – 4 on, 4 off shift pattern, with 12-hour shifts (6 am to 6 pm, 6 pm to 6 am)Training & Development: Ongoing professional development, including health and safety training, management training (ILM), IOSH, and cross-skilling opportunitiesCareer Growth: Job security and long-term career progression within a leading international manufacturer.
Responsibilities of the Electrical Maintenance Team Leader: - People Management, motivation and structured development of the team through performance review to ensure delivery of objectives through team working - Drive forward site improvement projects aimed at improving manufacturing capability, ensuring progression - Oversee the allocation of electrical tasks across the department and carry out electrical maintenance and repairs to existing machinery - Drive improvements in plant reliability through electrical best practices through application of continuous improvement tools and techniques, including 5S principles, across all areas of the manufacturing facility - Utilise a computerised maintenance management system (CMMS) to facilitate Planned Preventative Maintenance, Inspections, Service and Repairs and effective engineering stock control - Promote the highest Health and Safety standards to ensure a safe working environment.
Essential Qualifications & Experience of an Engineering Maintenance Team Leader: - UK Apprenticeship in Electrical Engineering or equivalent NVQ Level 3 qualification in Electrical Engineering - Proven experience in electrical maintenance within a manufacturing setting - Experience with developing and implementing PPM (Planned Preventative Maintenance) activities - Knowledge of basic continuous improvement tools and techniques - Good knowledge of current Health and Safety Law and best practice application within a manufacturing environment - Leadership and man-management skills with absence management and assessments and the ability to build, motivate, develop and improve the team through performance review - Ability to implement structured problem solving techniques, provide solutions and delegate.If interested, please apply now.......Read more...
Are you a hands-on, qualified electrician with strong industrial experience? Do you thrive in a fast-paced environment and enjoy solving complex engineering challenges? If so, we want to hear from you.
We are working in partnership with a leading UK manufacturer that operates at the cutting edge of heavy industrial engineering. As a Shift Electrician, youll be a key player in maintaining and improving a wide variety of electrical systems across a dynamic production site.
What Youll Be Doing:
- Provide electrical maintenance support across a variety of machinery, including forging presses, furnaces, CNC and manual lathes, millers and borers.
- Carry out both preventive and reactive maintenance to ensure high machine uptime.
- Respond to breakdowns efficiently to reduce production downtime.
- Take part in improvement and installation projects, including upgrades to electrical services.
- Mentor apprentices and contribute to the future of skilled trades.
What Youll Bring:
- Apprenticeship-trained or City & Guilds qualified in Electrical Engineering (or equivalent).
- Strong understanding of electrical principles and fault finding.
- Industrial background ideally from manufacturing, engineering, or heavy industry.
- Experience working with high-power machinery and site services.
- A proactive, safety-first mindset and a flexible, team-focused attitude.
Whats On Offer:
- The chance to work with a respected name in UK engineering.
- Supportive team culture where your skills and input are valued.
- Long-term stability and room for development.
- Competitive salary and shift premiums.
For more information or to apply, contact Ian at Holt Engineering on 07734406996 or email ian.broadhurst@holtengineering.co.uk.....Read more...
Electrical Project Manager
Sevenoaks
£60,000 - £70,000 Basic + quarterly bonuses + expenses covered + travel expenses + training and development + progression to senior management + EOT + annual leave + pension + MORE
Work for an established contractor as an Electrical Project Manager working on high end design and build projects across London. Join a team of industry experts who will constantly encourage and promote your personal development. Long term you’ll benefit from constant opportunities to increase your earning potential and see a clear route to senior management titles.
Established over 40 years ago this electrical contractor are expanding due to continued strategic growth and established long term relationships and are now seeking a highly ambitious electrical project manager. Be a strong presence on site and in the office working collaboratively with colleagues and clients to deliver projects on time and within budget. Enjoy a company that actively promotes training, development and progressing your career.
The role of the Electrical Project Manager will include: *Visiting sites, liaising and meeting with clients in London and virtually. *Monitoring and ensuring the program runs smoothly, updating contract directors with progress reports and identifying any issues or delays *Updating and monitoring financial reports of the projects and ensuring delivery of projects to time scales
The successful Electrical Project Manager will have: *NVQ Level 3 Electrical qualifications or completed an apprenticeship, CSCS or SMSTS/SSSTS/JIB card *Experience in commercial, design and build or any electrical projects *Driving licence *Happy to travel around London and to the office
For immediate consideration please call Emily on 0203 813 7951 and click to apply.
Keywords: Electrician, Electrical Project Manager, Project Manager, Construction, assistant project manager, 18th edition, commercial, design and build, south london, kent, sevenoaks, bromley, dartford, croydon, orpington, gravesend
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at futureengineer.co.uk to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
The role is to identify damaged mechanical and electrical components on a damaged Car/Light Commercial Vehicle, and remove and refit these components before and after body repair work has been carried out. They typically work on repairing vehicles that have been involved in accidents or similar incidents. This is usually within a collision repair workshop.
Duties will include:
Assessing faults
Preparing job cards and assessment reports
Accessing and removing mechanical and electrical components
Removing and fitting non-structural body panels
Removing and re-installing mechanical and electrical systems
Vehicle valeting.
Training:
Nationally recognised qualifications – IMI Apprenticeship in Vehicle Damage Mechanical, Electrical and Trim (MET) Technician (Standard – Level 3)
Functional Skills Level 2 (if required)
Regular review and welfare visits from our assessors who will observe all evidence opportunities that occur naturally in the workplace.Training Outcome:Upon successful completion and review of the apprenticeship, you will have the opportunity to gain employment with the business. Employer Description:Steer is the UK’s leading automotive repair business, with 98 locations and over 2,300 expert colleagues, repairing over 100,000 vehicles a year. Trusted by the world’s leading vehicle brands, we currently hold 42 manufacturer approvals and recommendations, including Porsche, Aston Martin, Bentley, McLaren, Jaguar Land Rover, Tesla, Mercedes, BMW MINI.Working Hours :Monday to Friday 8am to 5pm.Skills: Communication skills,Attention to detail,Team working,Initiative,Patience....Read more...
The role is to identify damaged mechanical and electrical components on a damaged Car/Light Commercial Vehicle, and remove and refit these components before and after body repair work has been carried out.
They typically work on repairing vehicles that have been involved in accidents or similar incidents. This is usually within a collision repair workshop.
Duties will include:
Assessing faults
Preparing job cards and assessment reports
Accessing and removing mechanical and electrical components
Removing and fitting non-structural body panels
Removing and re-installing mechanical and electrical systems
Vehicle valeting
Training:
Nationally recognised qualifications – IMI Apprenticeship in Vehicle Damage Mechanical, Electrical and Trim (MET) Technician (Standard – Level 3)
Functional Skills Level 2 (if required)
Regular review and welfare visits from our assessors who will observe all evidence opportunities that occur naturally in the workplace.Training Outcome:
Upon successful completion and review of the apprenticeship, you will have the opportunity to gain employment with the business
Employer Description:Steer is the UK’s leading automotive repair business, with 98 locations and over 2,300 expert colleagues, repairing over 100,000 vehicles a year. Trusted by the world’s leading vehicle brands, we currently hold 42 manufacturer approvals and recommendations, including Porsche, Aston Martin, Bentley, McLaren, Jaguar Land Rover, Tesla, Mercedes, BMW MINI.Working Hours :Monday - Friday, 8.00am - 5.00pm.Skills: Communication skills,Attention to detail,Team working,Initiative,Patience....Read more...
Cogent Skills is working with Alpek Polyester UK Ltd. to recruit an Electrical Maintenance Technician Apprentice to join its maintenance team at Wilton International.
Electrical Maintenance Technicians contribute to the fault-free and safe operation of the plants through the installation, maintenance, testing and repair of electrical equipment.
Job Responsibilities
This is very much a ‘hands-on’ role and, under close supervision, your responsibilities will include:
Installing, maintaining, testing and repairing electrical equipment
Completing planned and unplanned electrical maintenance activities
Following maintenance standard operating procedures
Completing documentation accurately and on time
Troubleshooting problems in the event of electrical failure of equipmentYou will be required to:
Work safely in a high-hazard environment, under highly regulated conditions, wearing safety equipment, as directed, and complying with all health, safety and environmental policies and procedures at all times
Work in varied conditions, inside and outside, on two process plants or in associated workshops, using engineering tools and specialist safety equipment
Safely use all necessary equipment and tools, and follow the appropriate engineering techniques, procedures and methods to complete maintenance tasks
Comply with required standards for documentation, good housekeeping, and time keeping
This is an exciting time, and a fantastic opportunity to embark on a hands-on career with Alpek Polyester UK Ltd, a leading global company within the industrial sciences sector
Training:Training schedule has yet to be agreed. Details will be made available at a later date.Training Outcome:This role is part of our talent planning for the future and, for the right person, we are looking to continue to develop the apprentice upon successful completion of the apprenticeship. Subject to satisfactory completion of the apprenticeship, candidates may be considered for any available permanent positions.Employer Description:As the specialists in skills for science and technology, our purpose is to make sure your business; your people and our industry are future ready.
We are a not-for-profit charitable organisation with a family of commercially focused companies committed to supporting the skills, needs and ambitions across the UK science and technology sector.Working Hours :During Year 1 the hours will vary but on average will be Monday – Friday, 9am – 5pm.
On site, Monday – Friday, 8am – 4pm. Some overtime and weekend working may be required at certain times.Skills: Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative....Read more...
We are seeking experienced Maintenance Technicians to join a leading engineering and manufacturing company in Exeter. This is an excellent opportunity to work in a fast-paced environment, ensuring the smooth operation of critical production equipment.
As a Maintenance Technician, you will play a key role in minimising production downtime, carrying out planned maintenance, and troubleshooting breakdowns.
This role is ideal for individuals with a strong background in electrical and mechanical maintenance, including fabrication and welding.
Key Responsibilities of a Maintenance Technician:
- Diagnose and repair breakdowns to minimise downtime.
- Read and interpret mechanical and electrical diagrams to troubleshoot and modify equipment.
- Perform preventative and planned maintenance using a Maintenance Management System.
- Assist with continuous improvement initiatives to enhance equipment reliability.
- Ensure compliance with health and safety regulations, including safe working at heights and confined spaces.
- Carry out electrical and mechanical tasks, including fabrication, welding, and minor electrical installations.
What Were Looking For:
Essential:
- Time-served apprenticeship with a Level 3 qualification (BTEC, City & Guilds, or equivalent).
- Proven experience in multiskilled maintenance, including electrical, pneumatic, and hydraulic systems.
- Ability to read and troubleshoot control panel schematics and technical drawings.
- Strong problem-solving skills with the ability to work independently and in a team.
- Comfortable working in a shift-based role in a high-demand environment.
Desirable:
- Experience with vacuum technology (advantageous but not essential).
- Strong computer literacy and familiarity with office software.
Whats in it for You?
- Competitive salary and benefits package.
- Career development opportunities in a growing organisation.
- A dynamic and fast-paced working environment with a supportive team.
- Training and upskilling in advanced maintenance technologies.
Apply Today!
If you are a skilled Maintenance Technician looking for your next challenge, we want to hear from you! To apply, submit your CV or contact Ian at Holt Engineering on 07734406996 for more information.....Read more...
An opportunity for an Electrical Technician to join a leading Chemical Manufacturing company in Manchester, offering a salary of up to £45,000 per year. This Monday to Friday, days-based role comes with a range of benefits, including a bonus structure, additional leave, company pension, flexitime, and various other incentives.As a Electrical Technician, you will be responsible for maintaining and repairing equipment on a lower-tier COMAH site, ensuring compliance with HSE, ATEX, and COMAH standards. You will troubleshoot faults, implement solutions, interpret technical drawings, and support plant operations, including shutdowns and contractor coordination.Electrical Technician Responsibilities
Perform maintenance and repairs on systems to minimise downtime.
Ensure compliance with safety regulations by actively participating in plant safety programs and promoting HSE best practices.
Troubleshoot and diagnose equipment failures, identify root causes, and implement corrective actions to prevent recurrence.
Interpret and utilise technical drawings, including loop diagrams and line schematics, for fault-finding and repairs.
Recommend and implement equipment modifications to improve system reliability and efficiency.
Execute preventive maintenance programs, ensuring adherence to HSE, ATEX, COMAH, and company standards.
Support and participate in plant shutdowns, contributing both technically and practically as required.
To be considered for this Electrical Technician role, the ideal candidate will hold a minimum RQF Level 3 qualification (e.g., City & Guilds Level 3) in a relevant discipline and have at least three years prior experience, preferably in an ATEX Zone. A recognised apprenticeship will also be considered.Please apply direct for further information regarding this Electrical Technician Opportunity.....Read more...
Our three-year Higher Apprenticeship Substations program will train you to become an engineer working on 11KV -132KV Substations within our major projects division.
During your training, you'll learn about project management, sales, design, testing equipment, safety protocols, system protection and control, whilst working on projects involving substation refurbishment, substation new builds, maintenance, technical support, problem diagnosis, and fault fixing.
This job will have a significant impact on the electricity network across England and Wales for the next 40 or 50 years. You'll be involved in:
asset replacement and refurbishment
troubleshooting mechanical and electrical issues
connecting new customers
You'll also play a crucial role in integrating renewable energy sources like wind and solar farms into the electricity network.
As you progress, you may even commission new equipment and take on responsibilities for the safety of your co-workers. If this sounds like the kind of opportunity you'd like to be part of, we're very interested in talking to you!
Training:As part of your Apprenticeship, you will be enrolled onto a Level 4 Electrical Power Network Engineer Apprenticeship which will take you 3 years to complete. You will be fully supported by our partnered training provider, Loughborough College, to achieve this qualification by attending college on a block release basis - travel and accomodation will be covered by Mitie if required.Training Outcome:By the end of the programme, you'll hold a Level 4 Electrical Power Network Engineer and, so long as you've proven yourself the right candidate, could have a job waiting for you!Employer Description:At Mitie, we’re the UK’s leading facilities management and professional services company. We deliver critical services that power businesses, communities, and individuals across the nation. Rock Power Connections are proud to be part of Mitie designing and building electrical infrastructure solutions across the UK, bringing high voltage power to the places it’s needed.Working Hours :Shifts may vary - Monday to Friday - 40 hoursSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
The Maintenance Electrician vacancy is working with a leading manufacturing company based in the Eggborough area, near Goole, Pontefract and Selby. The position offers excellent opportunities for both training and career development.
Location: Eggborough Nr Goole (Commutable from Thorne, Snaith, Knottingley, East, West and South Yorkshire)
What’s in it for you as a Maintenance Electrician?
Hours of Work – Panama - 2 on 2 off 3 on 3 off (Days and Nights 12 hours)
Salary - £53,245 (Annual pay increases)
277.5 hours holiday
Overtime paid at 1.5x and 2x
3 x Life Assurance Scheme
Discretionary bonus scheme
Training, Career and Development opportunities
Enhanced Company pension
Employee Assistance Programme
Main Duties & Responsibilities of Maintenance Electrician include;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible
Keeping and implementing plant wide PPM structures ensuring H&S, quality assurance as well as liaising with Engineering Stores
Working within a small Team and along side contractors to diagnose breakdowns and Electrical Faults across the Plant.
Experience and Qualifications Required for Maintenance Electrician;
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or HNC and HND - Electrical
Time served Electrical Engineer or as Maintenance Electrican
Skills in breakdowns, installations, invertors and PLCs
Ability to fault find, repair and provide solutions to problems
High degree of Health & Safety awareness.
The position may suit a Maintenance Engineer, Mechanical Maintenance Engineer, Maintenance Electrical Engineer, Maintenance Fitter, Maintenance Electrician, Multi-skilled Engineer, Electrical Engineer etc. ....Read more...
The Maintenance Electrician vacancy is working with a leading manufacturing company based in the Eggborough area, near Doncaster. The position offers excellent opportunities for both training and career development.
What’s in it for you as a Maintenance Electrician?
Hours of Work – Panama - 2 on 2 off 3 on 3 off (Days and Nights 12 hours)
Salary - £53,245 (Annual pay increases)
277.5 hours holiday
Overtime paid at 1.5x and 2x
3 x Life Assurance Scheme
Discretionary bonus scheme
Training, Career and Development opportunities
Enhanced Company pension
Employee Assistance Programme
Main Duties & Responsibilities of Maintenance Electrician include;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible
Keeping and implementing plant wide PPM structures ensuring H&S, quality assurance as well as liaising with Engineering Stores
Working within a small Team and along side contractors to diagnose breakdowns and Electrical Faults across the Plant.
Experience and Qualifications Required for Maintenance Electrician;
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or HNC and HND - Electrical
Time served Electrical Engineer or as Maintenance Electrican
Skills in breakdowns, installations, invertors and PLCs
Ability to fault find, repair and provide solutions to problems
High degree of Health & Safety awareness.
The position may suit a Maintenance Engineer, Mechanical Maintenance Engineer, Maintenance Electrical Engineer, Maintenance Fitter, Maintenance Electrician, Multi-skilled Engineer, Electrical Engineer etc. ....Read more...
Work alongside experienced professionals to learn and develop your skills.
Assist in the design, installation, and maintenance of electrical systems and equipment.
Perform routine maintenance and repairs on electrical systems and equipment.
Conduct tests and inspections on electrical systems to identify faults and potential issues.
Keep accurate records of all work completed and materials used.
Follow all health and safety regulations and protocols.
Training Outcome:Potential full-time job upon completion of apprenticeship.Employer Description:With over 50 years of boiler manufacturing experience, our advanced boiler house technology helps minimise downtime, reduce fuel usage and increase operational efficiency.
Trust in our expertise to deliver the reliability and performance your business demands. Our cutting-edge solutions ensure that your operations run smoothly, saving you time and money.Working Hours :Monday to Friday, working hours will be confirmed at interview.Skills: Attention to detail,Ambitious and motivated,Willingness to learn,Willingness to develop skills,Excellent problem-solving,Good communication skills,Ability to work in a team....Read more...
Your responsibilities will include:
Design Support
Assist in developing detailed electrical designs based on project specifications
Help create technical drawings and schematics using software like AutoCAD or Harnware
Collaborate with senior engineers to ensure designs meet client requirements and industry standards
Estimation Support
Assist in preparing accurate cost estimates for electrical projects, including materials, labour, and equipment
Analyse project specifications and technical drawings to determine project scope and requirements
Help conduct feasibility studies and risk assessments for proposed designs
Project Collaboration
Work closely with project managers, design engineers, and other stakeholders to gather necessary information and ensure project alignment
Participate in project meetings and contribute to discussions on design and cost estimation
Learning and Development
Engage in continuous learning to understand electrical engineering principles, design techniques, and estimation methods
Attend training sessions and workshops to enhance technical and professional skills
Training:Engineering technician Level 3 (A level) Apprenticeship Standard:
All apprentices will be required to achieve a minimum Level 2 Foundation competence qualification (Practical units, broad-based skills)
Level 3 Development Competence qualification (Practical work-based units)
Level 3 Development technical knowledge qualification (Theory-based units broad-based knowledge)
Apprentices without Level 2 English and maths will need to achieve this prior to taking EPA
End Point Assessment:
Portfolio-Based Occupational Competence Interview (Viva)
A nominated professional Institution (PEI) undertakes the independent assessment to determine if the apprentice has met the EngTech requirements as defined by the UK-SPEC
Training Outcome:This apprenticeship aligns with:
Institution of Engineering and Technology (IET) for Engineering Technician (EngTech) for EngTech
Institute of Mechanical Engineers (IMechE) for Engineering Technician (EngTech) for EngTech
Royal Aeronautical Society (RAeS) for Engineering Technician (EngTech) for EngTech
Future prospects with the company- Technical Engineer / Electrical Design EngineerEmployer Description:Itel Electronics specialises in the design and supply of electrical interconnect systems.
There are many harness manufacturers out there, but not all are equal. Established in 1991 we are immensely proud of who we are and what we do. Our customers don’t just use our products, they rely on them.Working Hours :Hours: Mon - Thur 08.00 – 16:30hrs (30-minute lunch) Fri 08.00 – 13.00hrs.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,A keen interest in electronics....Read more...
Working closely with experienced and qualified staff you will develop your knowledge of a range of Electrical switchgears, read and interpret schematics/drawings, control panel layout and fitting, wiring cabinets, including switchgear electrical repairs
Ensure that all Health and Safety standards are maintained.
Always show due diligence, comply with all company policies and procedures e.g., health and safety, training & development, quality, disciplinary & grievance, and sickness & absence etc.
Training:
You will work towards achieving a Level 3 advanced Engineering Fitter apprenticeship, attending NWTC Training Centre on day release, for training and Further Education
The remainder of your time will be spent with your employer training whilst employed. NWTC will monitor your Apprenticeship on a regular basis to ensure you achieve the standards required including core skills, knowledge and occupational behaviours in preparation for End point assessment and where required Functional Skills
Training Outcome:
At the end of the apprenticeship, candidates will be suitably trained and continue their employment dependent on the business needs at the time
Further in-house and external training and development available
Potential L4 / HNC for the right candidate at the right time
Employer Description:MAJAS Switchgear Limited are specialists in the custom design of electrical switchgear products and have the skills and knowledge within a fully integrated engineering team to manage projects from initial design and evaluation through to final installation. From our manufacturing facility in Haydock we design, manufacture and distribute low voltage switchgear products for commercial and industrial applications around the world.Working Hours :Monday- Thursday: 07.00- 16.00, 30 min unpaid lunch
Friday: 07.00- 13.00
This equates to 8.5 hrs x 4 = 34 + 6 (Friday) = 40 hrs.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative....Read more...
We are currently looking for 2 x Maintenance Electricians with a leading UK manufacturer. This role is Monday to Sunday role and offers a salary of circa £50,000 as well as fantastic company benefits such as pension of up to 5%, overtime (x1.5/x2) and further training and career development opportunities with a company that values its employees.
What's in it for you as a Maintenance Electrician -
Salary dependent upon experience £50,000 + per annum.
In addition, you have a pension of up to 5%, Branded Workwear, Private Health Care, Modern Canteen /Washroom facilities.
Hours of work are Monday to Sunday – 12 hours days and 12 hours nights.
Industry leading training and career development, including health and safety training, cross-skilling and upskilling such as PLC training.
Leadership and management training for those who are keen to progress their careers and demonstrate ambition.
Job security and personal career development opportunities within a market-leading, international manufacturing organisation.
- Key responsibilities of a Maintenance Electrician -
Providing plant-wide electrical maintenance service, departmental support, and repairs on a wide range of machinery such as invertors, motors, conveyor-based systems, panels, PLC's and automation machinery
Within the position you will have the opportunity to be involved with a wide range of maintenance operations and projects, which will be supported by a wide range of training opportunities, including accredited training programs.
The ability to work within a skilled team of engineers permanently.
PPM and reactive maintenance of industrial scale production machinery.
Experience and Qualifications Required for a Maintenance Electrician -
Engineering qualified by either a full Advanced Electrical Apprenticeship (Level 3) OR NVQ Level 3 AND BTEC Level 3 in Electrical Engineering - UK equivalent Electrical Engineering qualifications to Level 3.
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities.
Previous experience in undertaking maintenance within a fast-paced manufacturing environment.
Ability to fault find, repair and provide solutions to Electrical problems.
....Read more...
We are currently looking for 2 x Maintenance Electricians with a leading UK manufacturer. This role is Monday to Sunday role and offers a salary of circa £50,000 as well as fantastic company benefits such as pension of up to 5%, overtime (x1.5/x2) and further training and career development opportunities with a company that values its employees.
What's in it for you as a Maintenance Electrician -
Salary dependent upon experience £50,000 + per annum.
In addition, you have a pension of up to 5%, Branded Workwear, Private Health Care, Modern Canteen /Washroom facilities.
Hours of work are Monday to Sunday – 12 hours days and 12 hours nights.
Industry leading training and career development, including health and safety training, cross-skilling and upskilling such as PLC training.
Leadership and management training for those who are keen to progress their careers and demonstrate ambition.
Job security and personal career development opportunities within a market-leading, international manufacturing organisation.
- Key responsibilities of a Maintenance Electrician -
Providing plant-wide electrical maintenance service, departmental support, and repairs on a wide range of machinery such as invertors, motors, conveyor-based systems, panels, PLC's and automation machinery
Within the position you will have the opportunity to be involved with a wide range of maintenance operations and projects, which will be supported by a wide range of training opportunities, including accredited training programs.
The ability to work within a skilled team of engineers permanently.
PPM and reactive maintenance of industrial scale production machinery.
Experience and Qualifications Required for a Maintenance Electrician -
Engineering qualified by either a full Advanced Electrical Apprenticeship (Level 3) OR NVQ Level 3 AND BTEC Level 3 in Electrical Engineering - UK equivalent Electrical Engineering qualifications to Level 3.
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities.
Previous experience in undertaking maintenance within a fast-paced manufacturing environment.
Ability to fault find, repair and provide solutions to Electrical problems.
....Read more...
We are currently looking for 2 x Maintenance Electricians with a leading UK manufacturer. This role is Monday to Sunday role and offers a salary of circa £50,000 as well as fantastic company benefits such as pension of up to 5%, overtime (x1.5/x2) and further training and career development opportunities with a company that values its employees.
What's in it for you as a Maintenance Electrician -
Salary dependent upon experience £50,000 + per annum.
In addition, you have a pension of up to 5%, Branded Workwear, Private Health Care, Modern Canteen /Washroom facilities.
Hours of work are Monday to Sunday – 12 hours days and 12 hours nights.
Industry leading training and career development, including health and safety training, cross-skilling and upskilling such as PLC training.
Leadership and management training for those who are keen to progress their careers and demonstrate ambition.
Job security and personal career development opportunities within a market-leading, international manufacturing organisation.
- Key responsibilities of a Maintenance Electrician -
Providing plant-wide electrical maintenance service, departmental support, and repairs on a wide range of machinery such as invertors, motors, conveyor-based systems, panels, PLC's and automation machinery
Within the position you will have the opportunity to be involved with a wide range of maintenance operations and projects, which will be supported by a wide range of training opportunities, including accredited training programs.
The ability to work within a skilled team of engineers permanently.
PPM and reactive maintenance of industrial scale production machinery.
Experience and Qualifications Required for a Maintenance Electrician -
Engineering qualified by either a full Advanced Electrical Apprenticeship (Level 3) OR NVQ Level 3 AND BTEC Level 3 in Electrical Engineering - UK equivalent Electrical Engineering qualifications to Level 3.
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities.
Previous experience in undertaking maintenance within a fast-paced manufacturing environment.
Ability to fault find, repair and provide solutions to Electrical problems.
....Read more...
As a Calibration & Repair Engineer Apprentice you will be part of a team responsible for, repair, test, calibrate and adjust a wide range of test and measurement equipment from a wide range of electrical and physical parameters.
You will become an integral member of the team and make a significant contribution to business in achieving its ambitious business growth plans.
Responsibilities and Accountabilities:
Observing, learning, and understanding a wide range of engineering skills and processes whilst under the guidance of skilled technical staff
Demonstrate these skills and processes as the training period progresses by working independently or as part of a team, to undertake tasks as instructed and to increase overall contribution to the department
To undertake and successfully complete suitable college and/or practical training course(s) throughout the training period, achieving the academic grades and practical skills in order to entitle yearly progression
Learn and understand the importance of Health and Safety within the workplace
Learn how to maintain workshop equipment and keep it in good working order
Maintain a logbook over the duration of the apprenticeship, recording projects that have been undertaken and skills that have been learned
Maintain and ensure good housekeeping of the workplace
Any other reasonable duties appropriate to grade and role as required
Adhere to all policy and legislative requirements in respect of Health & Safety and Environmental legislation
Training:
The successful candidate will complete Level 3 Engineering and Manufacturing Support Technician Apprenticeship Standard
This will be delivered in college via day release once a week, and in the workplace with a tutor visiting once a month
Training Outcome:
Possibility of permanent employment and going on to complete further qualifications
Employer Description:Since 1982, we have proudly manufactured premium electrical safety test equipment to customers across the world who share our appreciation of quality and want to keep more people safe.
Where it all started... we've been manufacturing PAT testers from our head office in Peterlee since 1982 and continue to innovate and bring electrical safety professionals such as electrical contractors, facility managers and SMEs the best PAT testing equipment available.Working Hours :Monday- Friday
8.30am- 5pmSkills: Attention to detail,Problem solving skills,Analytical skills,Logical,Team working,Initiative....Read more...
We are seeking to employ and train a Technical Electrical Apprentice through advanced apprenticeships.
As an apprentice, you will be highly trained to work in the world of Engineering and Manufacturing in the Food Industry Sector the world’s leading supplier of Food Packaging Machines and Equipment.
The initial training and development phase will provide broad-based exposure to various aspects of electrical engineering within food packaging systems and production lines.
Following this phase, the successful candidate will be appointed as an Electrical Project Engineer, with a focus on the electrical functional design of automation systems. This role involves using proprietary software and engineering tools to create detailed electrical designs, which will be implemented, installed, and commissioned at customer sites.
The roles mentioned above will feature a range different engineering activities aligned to the job roles with a detailed development plan for the four years of their apprenticeship programme.
Key Responsibilities:
Assist in designing control panels, wiring layouts, and PLC integration of both Ishida manufactured equipment and OEM suppliers.
Help ensure all designs comply with hygiene and safety standards (e.g. ISO, CE, EHEDG, IP ratings etc).
Assist with Project Planning and Equipment Integration
Collaborate on integrating electrical systems into existing production lines with minimal downtime.
Help prepare electrical specifications, BOMs (bills of materials), and documentation packages for new equipment installations.
Support senior engineers during site visits to install and commission equipment.
Assist in I/O checks, motor testing, sensor calibration, and verifying automation functionality.
Aid in FAT (Factory Acceptance Testing) and SAT (Site Acceptance Testing) procedures.
Help troubleshoot and validate system performance based on food industry requirements.
Help maintain accurate as-built drawings and manuals for electrical systems.
Continuous Learning and Industry Familiarization
Learn the unique challenges of the food production environment, including washdown requirements, clean design principles, and equipment reliability.
Participate in training on automation systems, food safety standards.
Training:Together with invaluable commercial and practical experience, you’ll work towards several academic and vocational qualification levels throughout your time with us, which are fully paid for, including:
Advanced Manufacturing Engineering Foundation Competence – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Development Competence - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 2 & 3 on block release to Make UK
In house training in line with your requirements.
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Engineering Technician.Training Outcome:On successful completion of the programme, apprentices may have the opportunity to progress within Ishida into more specialised or senior technical roles. The company encourages internal progression and will support further qualifications aligned to career growth and business needs.Employer Description:About Ishida
Ishida a world leader in the design, manufacture and installation of weighing and packing line solutions, Ishida has an in-depth understanding of many diverse industries – from meat to confectionery, from snacks to frozen food and more. Ishida Europe has its headquarters in Birmingham, UK, and serves Europe, the Middle East and Africa (EMEA). We have wholly owned Ishida sales companies in 9 countries, and committed, experienced agents and distributors in a further 15 countries. Innovative weighing and packaging equipment plus complete line solutions for these territories are developed and constructed in our UK manufacturing facility.
Our people:
The wealth of knowledge and experience of Ishida personnel enables manufacturers to benefit from the best solutions to improve their weighing and packing operations. This allows customers to focus on their own business, while we focus on solving their challenges.
Our innovations:
Ishida Europe uses know-how, creativity and state-of-the art technology to develop weighing and packing solutions enabling our customers to stay ahead. We aim for continuous technical improvement - from our revolutionary multihead weighers and check weighers to our latest innovations such as the tray sealers and case packing systems.Working Hours :At Make UK, Monday - Thursday, 8.00am - 4.30pm. Friday, 8.00am - 12.30pm.
At Ishida: Monday - Friday, 38.5 hours. Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Electrical Maintenance Manager – Hard Services Provider – SE London - up to 60K One of our long standing clients is currently looking to recruit a Electrical Maintenance Manager to work as part of their busy estates team to help service and maintain one of their most important contracts based in South East London. They are looking for an experienced Maintenance Manager who will be able to provide a first class customer service and be able to organise, manage and motivate their engineering team; as well as supporting the senior management. The role will also be reporting directly to the Estates Director, who you will be working closely with on a day to day basis. The hours of work are Monday to Friday, 8-5 and the main duties of the role are as follows:Control of all electrical services, together with management of all associated engineering contracts.Manage all statutory compliance.Control of all building services, infrastructure, maintenance and repairs.Assist with project management of any building refurbishment projects.Ensure that all plant, back up and monitoring systems are maintained in good functioning order at all times, including the testing of all essential systems on a regular basis and in accordance with any relevant legislation.Control of trouble-shooting engineering support.Day to day support and adjustment of infrastructure as required, including liaison with user groups, preparation of documentation for changes, approved appointment of contractors and site supervision.Control of all relevant outsourced contracts.Ensure all procedures are adhered to by all relevant contractors and in accordance with current legislation.Ensure frequent checks are carried out to ensure cost effectiveness against market trends and that value for money is realised for all services.Chair regular update meetings with all contract managers relevant to services provided.Management of electrical related ‘incidents/outages’Implement plans and actions through your leadership skill to identify and deliver additional work opportunities and technical solutionsProvide technical guidance and support as required to ensure electrical systems are maintained to a high standard and defects are swiftly identified and rectified.Effective co-ordination of available resources to achieve technical and innovative solutions.Lead the team to achieve sustainability objectives to improve energy consumption through operational enhancement, whilst seeking out efficient technologies and scoping proposals for consideration.Applicants for this role must be able to meet the following criteria:Recognised apprenticeship and fully electrical qualified to recognised level ie C&G, HNC/HND.Proven background in a hard services maintenance role. Previous experience and involvement in managing contractors. Experience of working within estate environments, hospitals, healthcare.A strong and committed team player capable of prioritising and solving problems often under pressure, utilising innovative solutions.Must be a team player committed to working in a quality and professional environment.Strong people management skills.Excellent written and verbal communication skills.....Read more...
