Electrical Maintenance Engineer | Famous Historical Venue, South Kensington | Client Direct | £53,400 CBW is currently recruiting for an Electrically qualified Electrical Maintenance Engineer to work in house at a flagship historical venue in South Kensington. The ideal candidate will carry out daily plant room checks whilst helping to maintain the buildings electrical services and support the maintenance of mechanical plant services. This position would be ideal for an Electrical Maintenance Engineer currently in a similar position. In return, the company is offering a competitive salary of £53,400. This will be working client direct for one of the most attractive, growing businesses in the UK building services industry. Technical duties will include:Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters. Working hours:4 on, 4 off (2 earlies, 2 lates, 4 off then repeat)07:00-17:30 (earlies), 16:00-02:00 (lates)Cab home on late shift (must live within M25)Package:£53,400 salary22 shift days holidayMedical InsuranceFree meal on shiftCar parking on late shift / weekendGood pension contributionSeason Ticket LoanCycle to work schemeChildcare vouchersTravel insuranceHealth checksA lot of progression availableAnnual pay review Requirements:Experience working in commercial building servicesElectrically qualified City & Guilds Level 3 or equivalentTesting & Inspection18th Edition if electrically qualified Apprentice trained - Desired not essentialAble to work the hours advertisedExperience working within both landlord and tenant area's of a commercial premises are preferable. Please send your CV to Fin Havering - Cbw Staffing Solutions for more Information!....Read more...
Junior Maintenance Engineer (Electrical or Mechanical) - FM Service Provider - Commercial Building - City of London- £35,000 - £40,000Are you looking for a way into maintenance?Are you looking for a role in Central London?Are you electrically or mechanically qualified?If the answer is yes, then read on....An exciting opportunity to join an established building services company based in London has arisen! CBW Staffing Solutions are currently recruiting a Junior Maintenance Engineer either of an electrical, mechanical, or plumbing background, to be based in a commercial building in the City of London. He or she or they will be required to carry out planned and reactive building maintenance alongside the maintenance team on site. This person will be working closely with a senior member of the team and the team on-site to gain experience and training of building services.The successful candidate will understand Facilities Maintenance and have some experience in building maintenance. In return, the company is offering a competitive salary of up to £40,000, overtime, plenty of further training and a potential route into further career progression. Hours of workMonday to Friday – 08:00 am to 17:00 pm25 days holiday + Bank holidaysOvertime availableFurther trainingCompany pensionKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 3 or mechanically City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceHard working attitudeGood communication skillsClient FacingIf you are interested please email your CV to Alex Denton of CBW Staffing Solutions....Read more...
Multi Skilled Gas Engineer - Glasgow/Central Belt - Salary up to £46,000 DOE We are delighted to be partnering with a leading UK-wide Facilities Management company. As part of this exciting expansion, we are seeking experienced Mobile Multi-Skilled Commercial Gas Engineers to carry out PPM and Reactive repairs throughout out Glasgow and the Central Belt of Scotland. Key Responsibilities:Carry out servicing, repairs, and maintenance across a range of commercial properties.Deliver reactive maintenance to client sites, ensuring issues are resolved quickly and efficiently.Complete small installation works independently.Diagnose faults, source and fit parts, and ensure systems are restored to full working order.Undertake both planned preventative maintenance (PPM) and reactive tasks.Build and maintain excellent client relationships by providing a high level of customer service.Person Specification:Valid Commercial Gas qualifications (essential).Additional skills/certifications: F-Gas and 18th Edition.Proven experience in commercial building maintenance.Strong diagnostic and problem-solving skills.Client-facing with excellent communication.Full UK driving licence.Salary & Benefits:Salary: £40,000 – £46,000 (DOE & qualifications).Door-to-door travel fully paid.Excellent overtime rates: x1.5 & x2.0.Private healthcare.30 days holiday (including bank holidays).Ongoing training and career progression opportunities.....Read more...
AV Desktop / Helpdesk Support Engineer – I am looking for a seriously good technically proficient Guru in the world of AV, supporting integrated AV systems. You will need to have the ability to diagnose system faults remotely and come up with new and ingenius way to fix issues. You will be able to communicate in a professional manner to clients on the phone / remotely to help through any problems that arise and have experience with call logging / ticketing systems. You will effectively manage your time to make sure all tickets are completed to match agreed SLAs. End user clients will be in the blue chip corporate world. You will also be supporting a team of av field service engineers where you will be the go to person to help them find a solution to any issue. If you have the relevant AV knowledge that encompasses the below please send your CV asap.
Crestron control / switching
Audio DSP, Audinate Dante QSC Q-SYS
Installation, Integration, Commissioning, Support, Service, Maintenance, desktop
Lighting, sound, audio
VC Poly, MTRs, Teams, Zoom
Boardrooms, Meeting rooms, Learning spaces, Auditoria, Corporate AV
IT networks, Cisco, Draytek, Microsoft
Logitech, Yealink, Neat, Bose
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV
AV A-V A/V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEOCONFERENCE VC MTR POLY ZOOM TEAMS SUPPORT MAINTENANCE FIX HELPDESK DESKTOP MICROSOFT IPTV SHURE CRESTRON EXTRON CONTROL SWITCHING BERKS BERKSHIRE BUCKS BUCKINGHAMSHIRE BUCKS SURREY LONDON....Read more...
Mechanical Fitter – Plymouth
£36K + huge overtime availability. Long Term Career Opportunities!
Our client is looking for skilled Mechanical Fitters to work on exciting marine engineering projects in Plymouth. You’ll be part of a high performing team working on Warships & Submarines, with some of the most complex engineering work in the UK.
The Role
Carrying out installation, overhaul, and maintenance of mechanical systems and equipment
Working on propulsion units, pumps, diesel engines, high pressure air, and hydraulic systems
About You
Time served Mechanical Fitter or Maintenance Engineer
Background in marine, defence, power generation, or heavy engineering (other sectors also considered)
Confident with workshop machinery, mechanical alignment, and testing procedures
Strong attention to detail and commitment to safe working practices
Qualifications & Requirements
Level 3 qualification or recognised apprenticeship in a mechanical discipline
Eligible to obtain and maintain SC level Security Clearance
Open to candidates from across the UK looking to relocate to the South West
The Opportunity
Permanent, full time role with excellent pay, career growth & stability
Working on nationally significant marine and defence engineering projects
Being part of a team that takes pride in delivering world class results
Apply now to take your mechanical fitting career to the next level and be part of something exceptional!....Read more...
You will support and perform multi-skilled maintenance work at our Burgh Le Marsh site.
Supported by your training and our team, your tasks will include:
Mechanical and Electrical maintenance, installation, fault-finding and repair
Stripping down machinery and rebuilding it after hygiene procedures
Learning to work in a food production environment
Reading and interpreting engineering drawings
Learning pneumatic and hydraulic systems
Learning to work with programmable logic controllers (PLCs)
Responding to breakdowns of packing machinery
To assist with the completion of maintenance documents/worksheets
Assisting with engineering projects and improvement work
Servicing and maintaining production machinery in line with the company’s planned maintenance programme
Supporting the Machine Operators and Supervisors
All other associated duties as required
Training:The Food and Drink Maintenance Engineer Advanced Apprenticeship Level 3 will take you approximately 4 years to complete. You will attend college for 1 day per week at our Rochford Campus in Boston. You will also attend your Apprenticeship with your Employer for 4 days per week.Training Outcome:Progress to a multi-skilled engineer.Employer Description:Led by family values, upholding a belief in integrity and loyalty, the business is far from antiquated. Investment in innovative technology and state of the art buildings help stream line this modern business and future-proof it too. Welfare is at the top of the agenda, for birds and staff – all of which tend to be thought of as part of the extended Fairburn family. In 2022, Fairburn's unveiled a new-look packing centre and warehouse significantly expanding capacity thanks to advanced technology, and has announced exciting plans for further innovation in the future. Fairburn's added a 2400m sq extension to its Burgh le Marsh site, as part of a project to improve efficiency and ensuring it continues to deliver the freshest and highest quality eggs to retail customers. It is now one of the most technologically advanced egg packing hubs in the UK. Not only does Fairburn’s Eggs now have the capacity to grade 382,000 eggs per hour but plastic wrap consumption will be reduced by over 12 tonnes a year. The packing centre is accredited to BRC Grade A standards, the Lion Code of Practice, RSPCA Assured, the Organic Food Federation and the Organic Farmers and Growers Association.Working Hours :Monday- Friday 08:00- 16:30.
Day release to Boston College.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Patience....Read more...
Electrical Shift Engineer (Night bias) – Continental Shift – Commercial Building – Liverpool Street, London – £50,000 Per annum My client is seeking an Electrical Shift Engineer to be based across 4 buildings situated next to each other in Liverpool Street, London. A successful candidate will be electrically biased (C&G / NVQ). He or she will be required to carry out electrical maintenance across these four buildings. This role works a continental pattern with a focus on nights. In return, the company offers a competitive salary of £50,000, further training and career progression. Packageup to £50,000 per annumUniform and Tools ProvidedCycle to work scheme22 days holidayPrivate healthcare Overtime AvailablePensionInternal Progression & DevelopmentHours of workContinental Shift - 4 nights 4 off 2 days 1 off 3 nights 6 off 1 day..... - 19:00 - 07:00 / 07:00 - 19:00 Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as requiredMaintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified level (C&G, NVQ etc)18th edition Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsIf you are interested, please get in contact with Alex Denton of CBW Staffing solutions!....Read more...
Electrical Shift Engineer – Continental Shift – Commercial Building – Wembley, North West London – £48,000 Per annum + PackageMy client is seeking an Electrical Shift Engineer to be based in a commercial building located in Wembley, North West London. A successful candidate will be electrically biased (C&G / NVQ). He or she will be required to carry out electrical maintenance across this unique commercial building. In return, the company offers a competitive salary of £50,000, further training and career progression. Package£48,000 per annumUniform and Tools ProvidedCycle to work scheme22 days holidayPrivate healthcareOvertime AvailablePensionInternal Progression & DevelopmentHours of workContinental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified level (C&G, NVQ etc)18th edition Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf you are interested, please get in contact with Alex Denton of CBW Staffing solutions!....Read more...
Corporate AV Installation Engineer - Is it time for a change? Are you fed up working for a behemoth of AV company and feel the time is now to change to work for a company where everyone will know your name? My client a small niche provider of seamless AV integration, who value a solid project and happy client, this is not get in and get out type of a company. You will be valued, your work will be valued and your clients along with colleagues will value you. This means that I am looking for someone who is proud of the work they do and takes the time to make the work being done is being done well. I would like to see CVs that have circa 5 years of corporate AV integration experience into the corporate FTSE world as well the commercial side. Skills and experience needed are as follows:
VC Integration Cisco / Poly / huddles rooms,
Control systems Crestron
Switching Extron
Presentation solutions, videowalls, high end projection
Audioconference / Teleconference
DSP / Dante / QSC / QSYS
Basic systems programming & commissioning
Boardrooms, training rooms, meeting rooms, auditoria, reception areas
This position is more about you and a lifestyle choice. Due to the size of the company, you will have a real opportunity to make a difference and build your skills in the long term. There will be room to grow and develop but you must want to. If this is the type of environment that you think you can thrive in the please send me your CV ASAP.AV A/V A-V AUDIOVISUAL AUDIO/VISUAL AUDIO-VISUAL CRESTRON EXTRON BARCO CHRISTIE VIDEOWALL INTERACTIVE VIDEOCONFERENCE VC INSTALLATION VC INSTALL COMMISSIONING RACK CORPORATE BLUE CHIP LONDON BUCKS BERKS BERKSHIRE BUCKINGHAMSHIRE MIDDX MIDDLESEX SURREY....Read more...
Industrial Door EngineerSalary: £38,000 to £45,000 per year + overtime + benefitsLocation: Hampshire (field-based) - Full UK Driving Licence essentialFull-time, PermanentAt Croma Fire & Security, part of the respected Croma Group, we are passionate about protecting people, property, and businesses. As a trusted UK-wide provider of security, fire, industrial door, and locksmith solutions, we deliver excellence across sectors from schools and hospitals to retail, manufacturing, and national infrastructure.We are now looking for an experienced Industrial Door Engineer to join our growing team, working on the servicing, repair, and installation of industrial and automatic door systems across Hampshire.Responsibilities include but not limited to:
Install, maintain, and repair a wide range of industrial, automatic, and pedestrian doors.Conduct routine inspections, fault-finding, and troubleshooting to ensure reliability and compliance.Deliver exceptional service on-site, maintaining strong client relationships.Ensure all work meets Health & Safety standards and hold or obtain a valid CSCS card.Work independently and collaboratively as part of a professional engineering team.
The ideal candidate
Minimum 2+ years’ experience working with industrial and/or automatic doors.Clean UK driving licence and willingness to travel (approx. 75%).Sound understanding of Health & Safety legislation.Excellent communication and customer service skills.Ability to manage workload efficiently and represent Croma to the highest standard.Desirable: Electrical qualification, Automatic Door and Access Control experience.
What you will get in return:
Competitive salary (£38,000 to £45,000 doe)Enhanced earnings through overtime, travel time, and call-out rotaCompany van, fuel card, tools, mobile and laptop providedStaff Share Option Scheme & annual company share scheme20 days holiday (rising to 25 with service) plus bank holidaysCompany pension and on-site parkingPrivate GP access for you and your family, plus wellbeing and health supportOngoing training & professional development, with clear career progression routesA supportive team culture where engineers are respected, listened to, and rewardedA varied and interesting workload within a company that’s big enough to grow with, yet small enough to care
At Croma, we are more than just a service provider, we are industry leaders dedicated to innovation, safety, and quality. Join a team that values your expertise, invests in your growth, and gives you the platform to excel.Interested? If so please upload your CV today and take the next step with Croma Fire & Security. INDHS ....Read more...
Industrial Door EngineerSalary: £38,000 to £45,000 per year + overtime + benefitsLocation: Hampshire (field-based) - Full UK Driving Licence essentialFull-time, PermanentAt Croma Fire & Security, part of the respected Croma Group, we are passionate about protecting people, property, and businesses. As a trusted UK-wide provider of security, fire, industrial door, and locksmith solutions, we deliver excellence across sectors from schools and hospitals to retail, manufacturing, and national infrastructure.We are now looking for an experienced Industrial Door Engineer to join our growing team, working on the servicing, repair, and installation of industrial and automatic door systems across Hampshire.Responsibilities include but not limited to:
Install, maintain, and repair a wide range of industrial, automatic, and pedestrian doors.Conduct routine inspections, fault-finding, and troubleshooting to ensure reliability and compliance.Deliver exceptional service on-site, maintaining strong client relationships.Ensure all work meets Health & Safety standards and hold or obtain a valid CSCS card.Work independently and collaboratively as part of a professional engineering team.
The ideal candidate
Minimum 2+ years’ experience working with industrial and/or automatic doors.Clean UK driving licence and willingness to travel (approx. 75%).Sound understanding of Health & Safety legislation.Excellent communication and customer service skills.Ability to manage workload efficiently and represent Croma to the highest standard.Desirable: Electrical qualification, Automatic Door and Access Control experience.
What you will get in return:
Competitive salary (£38,000 to £45,000 doe)Enhanced earnings through overtime, travel time, and call-out rotaCompany van, fuel card, tools, mobile and laptop providedStaff Share Option Scheme & annual company share scheme20 days holiday (rising to 25 with service) plus bank holidaysCompany pension and on-site parkingPrivate GP access for you and your family, plus wellbeing and health supportOngoing training & professional development, with clear career progression routesA supportive team culture where engineers are respected, listened to, and rewardedA varied and interesting workload within a company that’s big enough to grow with, yet small enough to care
At Croma, we are more than just a service provider, we are industry leaders dedicated to innovation, safety, and quality. Join a team that values your expertise, invests in your growth, and gives you the platform to excel.Interested? If so please upload your CV today and take the next step with Croma Fire & Security. INDHS ....Read more...
Industrial Door EngineerSalary: £38,000 to £45,000 per year + overtime + benefitsLocation: Hampshire (field-based) - Full UK Driving Licence essentialFull-time, PermanentAt Croma Fire & Security, part of the respected Croma Group, we are passionate about protecting people, property, and businesses. As a trusted UK-wide provider of security, fire, industrial door, and locksmith solutions, we deliver excellence across sectors from schools and hospitals to retail, manufacturing, and national infrastructure.We are now looking for an experienced Industrial Door Engineer to join our growing team, working on the servicing, repair, and installation of industrial and automatic door systems across Hampshire.Responsibilities include but not limited to:
Install, maintain, and repair a wide range of industrial, automatic, and pedestrian doors.Conduct routine inspections, fault-finding, and troubleshooting to ensure reliability and compliance.Deliver exceptional service on-site, maintaining strong client relationships.Ensure all work meets Health & Safety standards and hold or obtain a valid CSCS card.Work independently and collaboratively as part of a professional engineering team.
The ideal candidate
Minimum 2+ years’ experience working with industrial and/or automatic doors.Clean UK driving licence and willingness to travel (approx. 75%).Sound understanding of Health & Safety legislation.Excellent communication and customer service skills.Ability to manage workload efficiently and represent Croma to the highest standard.Desirable: Electrical qualification, Automatic Door and Access Control experience.
What you will get in return:
Competitive salary (£38,000 to £45,000 doe)Enhanced earnings through overtime, travel time, and call-out rotaCompany van, fuel card, tools, mobile and laptop providedStaff Share Option Scheme & annual company share scheme20 days holiday (rising to 25 with service) plus bank holidaysCompany pension and on-site parkingPrivate GP access for you and your family, plus wellbeing and health supportOngoing training & professional development, with clear career progression routesA supportive team culture where engineers are respected, listened to, and rewardedA varied and interesting workload within a company that’s big enough to grow with, yet small enough to care
At Croma, we are more than just a service provider, we are industry leaders dedicated to innovation, safety, and quality. Join a team that values your expertise, invests in your growth, and gives you the platform to excel.Interested? If so please upload your CV today and take the next step with Croma Fire & Security. INDHS ....Read more...
Industrial Door EngineerSalary: £38,000 to £45,000 per year + overtime + benefitsLocation: Hampshire (field-based) - Full UK Driving Licence essentialFull-time, PermanentAt Croma Fire & Security, part of the respected Croma Group, we are passionate about protecting people, property, and businesses. As a trusted UK-wide provider of security, fire, industrial door, and locksmith solutions, we deliver excellence across sectors from schools and hospitals to retail, manufacturing, and national infrastructure.We are now looking for an experienced Industrial Door Engineer to join our growing team, working on the servicing, repair, and installation of industrial and automatic door systems across Hampshire.Responsibilities include but not limited to:
Install, maintain, and repair a wide range of industrial, automatic, and pedestrian doors.Conduct routine inspections, fault-finding, and troubleshooting to ensure reliability and compliance.Deliver exceptional service on-site, maintaining strong client relationships.Ensure all work meets Health & Safety standards and hold or obtain a valid CSCS card.Work independently and collaboratively as part of a professional engineering team.
The ideal candidate
Minimum 2+ years’ experience working with industrial and/or automatic doors.Clean UK driving licence and willingness to travel (approx. 75%).Sound understanding of Health & Safety legislation.Excellent communication and customer service skills.Ability to manage workload efficiently and represent Croma to the highest standard.Desirable: Electrical qualification, Automatic Door and Access Control experience.
What you will get in return:
Competitive salary (£38,000 to £45,000 doe)Enhanced earnings through overtime, travel time, and call-out rotaCompany van, fuel card, tools, mobile and laptop providedStaff Share Option Scheme & annual company share scheme20 days holiday (rising to 25 with service) plus bank holidaysCompany pension and on-site parkingPrivate GP access for you and your family, plus wellbeing and health supportOngoing training & professional development, with clear career progression routesA supportive team culture where engineers are respected, listened to, and rewardedA varied and interesting workload within a company that’s big enough to grow with, yet small enough to care
At Croma, we are more than just a service provider, we are industry leaders dedicated to innovation, safety, and quality. Join a team that values your expertise, invests in your growth, and gives you the platform to excel.Interested? If so please upload your CV today and take the next step with Croma Fire & Security. INDHS ....Read more...
CAD MANAGER / DESIGN MANAGER OLDHAM £60,000 CIRCA (NEGOTIABLE DEPENDING ON EXPERIENCE)
THE OPPORTUNITY:We’re exclusively supporting a highly reputable business based in Oldham, who are looking to appoint a CAD Manager / Design Manager to lead and develop their growing design department.This is a fantastic opportunity to join a business recognised for delivering exceptional design, engineering and installation services across commercial, healthcare, high-security and new build environments. Working alongside major partners, they pride themselves on offering cost-effective, innovative and sustainable solutions.As the CAD Manager / Design Manager, you’ll lead a team of experienced Design Engineers, taking ownership of the design process from concept through to completion. You’ll ensure drawings are technically precise, cost-effective, and aligned with customer specifications, while driving best practice, efficiency and continuous improvement across the department.
THE CAD MANAGER / DESIGN MANAGER ROLE:
Lead and manage a team of Design Engineers, overseeing workload, quality and professional development.
Oversee the production of detailed designs and layout drawings for projects.
Provide technical leadership and ensure all drawings meet client specifications, design standards, and regulatory compliance.
Work collaboratively with project managers, engineers and clients from initial consultation through to final delivery.
Ensure designs are optimised for cost, installation efficiency and long-term performance.
Liaise with suppliers and key manufacturer partners to ensure the most suitable products and systems are specified.
Drive innovation and continuous improvement across the CAD and design process.
Report directly to senior management on project progress, team performance, and design output quality.
THE PERSON:
Proven experience as a CAD Manager, Design Manager, or in a senior Design Engineer role
Strong working knowledge of AutoCAD 2D; additional experience with Autodesk Inventor or SolidWorks would be advantageous.
Excellent leadership and team management skills and able to mentor, motivate and develop junior design engineers.
Strong commercial awareness and ability to ensure designs are both technically sound and cost-effective.
Confident communicator who can liaise effectively with clients, suppliers and internal teams.
Detail-oriented, proactive and able to manage multiple projects simultaneously.
Competent with Microsoft Office and Excel (including formula creation).
TO APPLY FOR THE CAD MANAGER / DESIGN MANAGER POSITION:Please send your CV via the advertisement for immediate consideration.
By sending an application or applying for a job, you consent to your personal data being processed and stored by Get Recruited (UK) Ltd in accordance with our Cookie & Privacy Policy (available in the footer on our website). Get Recruited (UK) Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. We are an equal opportunities employer and we never charge candidates a fee for our services.....Read more...
Position: Vessel Electrical Engineer (Shore Based)
Job ID: 1873/1
Location: Liverpool (with travel to Belfast)
Salary: £40,000–£45,000 DOE
Type: Permanent
Benefits: 25+ days holiday, private health insurance (including spouse and children under 18, accepting all pre-existing conditions, taxed), 8% employer pension contribution & 8% employee contribution, vehicle provided for business use.
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy, and Subsea sectors – visit: www.hsbtechnical.com for a full list of our vacancies.
Position Overview
The Vessel Electrical Engineer (shore-based) will focus on surveys, fault finding, repairs, and installation of vessel electrical systems across operational vessels, from engine room to bridge. You will be the go-to technical expert for electrical works, ensuring operational vessels remain safe, compliant, and fully functional.
Key Duties & Responsibilities
• Conduct electrical surveys on vessels, including dockings, overhauls, and routine inspections.
• Fault-find, repair, and install vessel electrical systems, covering:
• Engine Controls (Deep Sea, Comap, and various other systems)
• Power Management Systems (PMS)
• Bridge systems including navigation, radar, communication, and other electrical equipment.
• Assist with preparation and execution of pre-docking tests and inspections, including reporting and follow-up actions.
• Organise and manage parts and spares for repairs and installations.
• Maintain clear and effective communication with vessel crew and shore-based management.
• Perform preventative maintenance and reactive breakdown response, including occasional weekend/on-call duties.
Qualifications & Requirements
• Ex-Royal Navy or Ex-Merchant Navy – ETO, RFA preferred.
• Minimum 1–3 years’ experience in the marine industry.
• Basic understanding of diesel engines and propulsion system controls & monitoring systems.
• Experience with engine controls and power management systems.
• Competent in fault finding and rectification of electrical and electronic defects.
• Able to carry out electrical work, testing surveys, dockings, overhauls, and other repairs.
• Excellent command of English, both oral and written.
• Fully proficient with computers and applications.
• Full clean UK Driving Licence.
• Flexibility to travel to Belfast and other locations as required.
Working Hours & Environment
• Monday–Friday standard hours (on tugs in Liverpool/Belfast).
• Some reactive weekend work may be required for broken vessels.
• Team size: reporting directly to Technical Superintendent in Liverpool.
• Role involves breakdown response, preventative maintenance, and reactive work across vessels.
Compensation & Benefits
• Salary: £40,000–£45,000 DOE
• Overtime: Any extra hours worked are compensated with time off in lieu.
• 25+ days holiday.
• Private health insurance (includes spouse and children under 18, accepting all pre-existing conditions, taxed).
• Pension: 8% employer, 8% employee.
• Company vehicle provided for business use.
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
Field-Based Electrician – UKPN / 18th Edition
Location: Field-based – North London, Cambridgeshire, Norfolk & surrounding counties
We are seeking a skilled and qualified Field-Based Electrician to join a specialist team supporting utility infrastructure across the region. This role is ideal for someone with UKPN authorisation and 18th Edition certification, who is confident working independently on substations, emergency power systems, and associated electrical installations.
You'll play a critical role in keeping backup power systems, UPS units, and battery chargers running smoothly at key utility sites.
Key Responsibilities:
Carry out installation, maintenance, and servicing of electrical systems across UKPN and other utility sites.
Diagnose and repair faults in backup power systems, battery chargers, UPS units, and emergency lighting.
Perform scheduled preventative maintenance to reduce downtime and improve system reliability.
Provide on-site and remote support to clients, ensuring all work complies with safety and technical standards.
Complete detailed service documentation and report findings.
Ensure all works are carried out in line with UKPN and 18th Edition regulations.
Requirements:
Strong background as a field-based electrician or electrical service engineer.
Hands-on experience with battery backup systems, UPS units, and emergency lighting.
Access to work on UKPN, National Grid, Western Power, or Scottish Power sites.
Fully qualified with 18th Edition Wiring Regulations.
CSCS card and experience working as an Authorised Person preferred.
Full UK driving licence and comfortable with regional travel.
This is an exciting opportunity to join a trusted technical team, supporting essential power infrastructure throughout the UK. You'll be part of a company that values electrical safety, independence in the field, and technical excellence.
Apply Now:
Send your CV to NDrain@redlinegroup.Com or call Nick on 07487 756328 to find out more.....Read more...
No two days will be the same in this role and as a Digital Apprentice, your main duties will be to:
Provide first line support to internal and external customers including triaging jobs through the new IT ticketing system
Support and action the installation of new and existing hardware/ software as well as supporting the cloud environment
Ensure equipment is set up correctly and the right access has been provided to colleagues
Training:In additional to the above, this role also includes a chance for you to undertake a Level 3 Apprenticeship within IT. On successful completion of the programme (usually 18 months), you will be awarded on a Level 3 Information Communications Technician Apprenticeship. As part of your learning, you will also receive hands-on training, mentoring and support which will enable you to develop both your technical expertise and customer focus skills. If required, you will also complete Functional Skills in English and maths.Training Outcome:
IT Support Officer
IT Field Technician
Systems Administrator
Network Engineer
Employer Description:St Leonard's Hospice's mission is to provide excellent care and support to those living with life-limiting illness and to the people they care about, to enrich their lives and to contribute to the ongoing development of end-of-life care. We do this by placing our patients at the centre of everything we do, and through involving patients and their families in all decisions regarding their care.
We can only achieve this with the help of our amazing colleagues, by developing and recognising their contribution, and by sharing our knowledge and skills through education, audit and research.Working Hours :Monday to Friday during office hoursSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Are you a systems engineering professional looking to work on mission-critical aerospace systems? Were hiring a Senior Systems Engineer to join a high-performing team developing advanced release systems used across some of the worlds most prominent military aircraft platforms.
This role offers the opportunity to work across the full system lifecycle, from concept through to design, integration, and in-service support, on projects that directly support national and global security operations.
What Youll Be Doing:
- Lead systems engineering activities, from technical planning and requirements management to verification and validation.
- Analyse system performance across concept, design, testing, installation, and operations phases.
- Collaborate cross-functionally with stakeholders to interpret operational needs and translate them into system requirements.
- Conduct trade studies, requirements allocation, and interface definitions.
- Support complex project and task management across multidisciplinary teams.
- Help shape operational documentation and ensure engineering solutions meet technical, schedule, and cost expectations.
What Youll Bring:
- Degree in Engineering or a related discipline (or equivalent industry experience).
- 5+ years experience in systems engineering, with knowledge of the full development lifecycle.
- Strong background in requirements management and systems architecture.
- Experience with ILS (Integrated Logistic Support) and/or reliability.
- Skilled in documentation, reporting, and technical communications.
- Experience with tools like DOORS, Innoslate, or equivalent.
- Awareness of CAD, CFD, and FEA tools and regulatory compliance processes (e.g. MAA, DAOEs) is an advantage.
- Comfortable providing mentoring or coaching to less experienced engineers.
Desirable Experience:
- Background in aerospace, defence, or mission-critical system environments.
- Exposure to IPS/ILS (Integrated Product or Logistics Support).
- Experience in supporting Certificate of Design and regulatory approvals.
Why Join?
- Half-day Fridays for better work-life balance
- 25 days annual leave (plus bank holidays), increasing with service
- Private medical insurance (with optional family cover)
- Up to 7% employer pension contribution
- Life assurance, group income protection, and a flexible benefits platform including gym membership, dental, critical illness cover, and cycle-to-work
- Access to an employee assistance programme for mental health and wellbeing
Eligibility Requirements:
Please note: Due to the nature of the work, UK right-to-work and eligibility for BPSS clearance is required.
This is an exciting opportunity to work on cutting-edge systems that make a real impact. If you're ready to take on a senior technical role with hands-on influence and strategic oversight, we want to hear from you.
Apply now to join a team shaping the future of aerospace technology.
RW....Read more...
Answer incoming calls and emails from customers, engineers, and suppliers.
Log service calls and maintenance requests accurately into the system.
Provide updates to customers on the progress of their service requests.
Liaise with engineers to coordinate call-outs, repairs, and follow-ups.
Assist with scheduling planned maintenance visits.
Update and maintain service records and job sheets.
File and organise both digital and physical documentation.
Assist with generating invoices and processing purchase orders.
Input data accurately into CRM and job management systems.
Support with stock control and ordering parts when required.
Learn how to manage engineer diaries and route planning efficiently.
Support colleagues with ad-hoc admin tasks and small projects.
Attend team meetings and contribute to process improvements.
Shadow different departments to gain a full understanding of the business.
Training:Level 3 Apprenticeship in Business Administration, consisting of:
Level 3 Apprenticeship in Business Administration
Level 2 Functional Skills in mathematics (if applicable)
Level 2 Functional Skills in English (if applicable)
You will be required to attend a half-day session with HBTC where you will work towards any functional skills (where needed) that you have to take. Additional off-the-job training will also be required as part of the apprenticeship. There will also be an end-point assessment. Training Outcome:
After the apprenticeship, there may be an opportunity for you to advance in the workplace or go on to higher education.
Employer Description:Wessex Catering has been dedicated to giving our Customers outstanding Catering and Electrical Maintenance lead by our trained engineering workforce. We have been providing a service to the Catering Industry for over 20 years in which during this time we have built a relationship with our large client base offering both Catering, Electrical Maintenance and installation projects.Working Hours :7.45am to 4.45pm, Monday - Friday.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Team working,Initiative....Read more...
Job Title: Electrical Engineer
Location: Middlesborough
Job Type: Full-time
Salary: £17.50p/hour (with progression)
Hours - Monday to Thursday 8am -6pm & 8am - 1pm on a Friday. (there is further flexibility with hours if needed)
Benefits:
Uniform X 3 - cleaned by the company
£100 boot allowance every year
20 days plus 8 Bank holidays
Pension contribution
Christmas shutdown
Overtime at time and a half
HSB Technical Ltd is a leading specialist recruiter operating across the Power & Propulsion, Shipbuilding, Shipping & Energy, and Aerospace sectors. With a wide range of permanent and contract opportunities available both in the UK and internationally, we pride ourselves on connecting skilled professionals with reputable clients. To learn more about us and our current vacancies, please visit our website or connect with us on LinkedIn.
On behalf of our Client we are looking for an experienced and reliable Marine Electrician to join our team. This role involves the installation, maintenance, and testing of electrical systems on steel vessels constructed to MCA (Maritime and Coast guard Agency) and Class standards. The successful candidate will bring a solid background in the marine industry, strong technical ability, and a commitment to ensuring all electrical systems are safe, compliant, and operational.
Key Responsibilities:
Install, maintain, and repair electrical systems including wiring, control panels, lighting, and navigation equipment on steel vessels.
Interpret electrical schematics, technical drawings, and wiring diagrams accurately.
Ensure all electrical work adheres to MCA, Class, and industry safety regulations.
Perform diagnostic testing and fault-finding to maintain the integrity of electrical systems.
Install and wire switchboards, distribution panels, and control systems.
Collaborate with engineers, ship wrights, and other trades to integrate electrical work into the broader shipbuilding process.
Install and commission components such as motors, generators, inverters, batteries, and shore power systems.
Strictly follow health and safety procedures, ensuring all work complies with maritime safety standards.
Maintain accurate records of all work performed and promptly report any issues or concerns to supervisors or project managers.
Candidate Requirements:
Proven experience as a Marine Electrician, ideally within shipbuilding or marine maintenance.
Solid understanding of MCA and Class regulations for electrical systems.
Proficiency in reading and interpreting electrical and technical drawings.
Hands-on experience with AC/DC systems, generators, battery management, and navigation equipment.
Strong skills in electrical troubleshooting and fault diagnosis.
This position is being advertised by HSB Technical Ltd, an REC (Recruitment and Employment Confederation) registered recruitment consultancy. We have been appointed to manage the recruitment process on behalf of our client....Read more...
Day Shift Engineer - Client Direct - Banking Environment - London - £44,000 + bonus + AP Training 📍 About the Role: Exciting opportunity to work In House / Client Direct for a very well known financial institution in London. My client is looking for a Day Shift Maintenance Engineer to be based across 2 critical / commercial buildings next to each other in London. The successful candidates will be electrically or mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, he or she will be required to carry out mechanical, electrical and fabric maintenance to the following. In return the company is offering a competitive package of £44,000 + 10% bonus + AP Training and AP allowance once training complete. 💼 What’s in it for you?Up to £44,000 + 10% bonus£750 HV / £750 LV or £750 Mechanical AP payment~£3,000 call out allowance after site familiarisation (1 in 7 call out + 2x hourly rate if called out)Overtime available at 2x rate on weekdays and weekendsHV/LV or Mechanical AP Training10% Pension contribution from employer26 shifts holidayPrivate Health Insurance Dental PlanInterest Free Season Ticket LoanLife insurance 4x salaryA lot of progression available 🕒 Working Hours:Day Shift (10 hour shifts)3 on, 1 off, 3 on, 3 off, 4 on, 7 off, 4 on, 3 off Later start on Saturdays & Sundays 🔧 Key Responsibilities:Ensure that Planned Preventative Maintenance & Reactive maintenance is carried out to all client assets through operation of Planned Preventative Maintenance System.Ensure that plant faults and defects are swiftly remedied to maintain the plant in serviceable order at all times.Ensure that suitable spares are available to carry out maintenance of the above plant.Ensure that comprehensive maintenance records are completed in the form of job sheets.Ensure that Method Statements and Risk Assessments are prepared, reviewed and utilized for all tasks (PPM and reactive) carried out to ensure safe working practices.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distributionEmergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPumps, motorsBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractors✅ Requirements:Electrically or Mechanically qualified Level 3 / HNC / HNDYou must be able to provide copies of your trade certificates (Essential)Will need to pass security clearance A proven track record in commercial building maintenanceAn understanding of critical plant: Chillers, HVAC, UPS systems, Cooling Towers etcExcellent customer skills Ideally multi skilled Highly desirable (Not essential)High Voltage - Experience / Qualification - Current 📩 Ready to Apply? Send your CV to Fin@cbwstaffingsolutions.comOr call 0203 583 3099 and ask for Fin to learn more! ....Read more...
Day Shift Engineer - Client Direct - Banking Environment - London - £44,000 + bonus + AP Training 📍 About the Role: Exciting opportunity to work In House / Client Direct for a very well known financial institution in London. My client is looking for a Day Shift Maintenance Engineer to be based across 2 critical / commercial buildings next to each other in London. The successful candidates will be electrically or mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, he or she will be required to carry out mechanical, electrical and fabric maintenance to the following. In return the company is offering a competitive package of £44,000 + 10% bonus + AP Training and AP allowance once training complete. 💼 What’s in it for you? Up to £44,000 + 10% bonus£750 HV / £750 LV or £750 Mechanical AP payment~£3,000 call out allowance after site familiarisation (1 in 7 call out + 2x hourly rate if called out)Overtime available at 2x rate on weekdays and weekendsHV/LV or Mechanical AP Training 10% Pension contribution from employer26 shifts holidayPrivate Health Insurance Dental PlanInterest Free Season Ticket LoanLife insurance 4x salaryA lot of progression available 🕒 Working Hours: Day Shift (10 hour shifts)3 on, 1 off, 3 on, 3 off, 4 on, 7 off, 4 on, 3 off Later start on Saturdays & Sundays 🔧 Key Responsibilities: Ensure that Planned Preventative Maintenance & Reactive maintenance is carried out to all client assets through operation of Planned Preventative Maintenance System.Ensure that plant faults and defects are swiftly remedied to maintain the plant in serviceable order at all times.Ensure that suitable spares are available to carry out maintenance of the above plant.Ensure that comprehensive maintenance records are completed in the form of job sheets.Ensure that Method Statements and Risk Assessments are prepared, reviewed and utilized for all tasks (PPM and reactive) carried out to ensure safe working practices.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPumps, motorsBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractors ✅ Requirements: Electrically or Mechanically qualified Level 3 / HNC / HNDYou must be able to provide copies of your trade certificates (Essential)Will need to pass security clearance A proven track record in commercial building maintenanceAn understanding of critical plant: Chillers, HVAC, UPS systems, Cooling Towers etcExcellent customer skills Ideally multi skilled Highly desirable (Not essential) High Voltage - Experience / Qualification - Current 📩 Ready to Apply? Send your CV to Charlie@cbwstaffingsolutions.comOr call 0203 583 3099 and ask for Charlie to learn more!....Read more...
We are looking for a multi skilled Maintenance Engineer to join our team at Fine Tubes. The successful candidate will be responsible for preventative maintenance as well as responding to emergency machine break downs throughout the plant. They will be focused on improving the reliability of machines, installation and movements of existing machines, overhaul and repair of machines and equipment as well as ensuring machines and equipment on site are safe, working efficiently and fit for purpose.
Key responsibilities include:
• To adhere to Company Rules / Health and Safety / Environmental Standards and Practices.
• Carry out Preventative Planned Maintenance tasks to ensure all assets are safe and reliable for use. • Fault finding on all assets, identify and repair machine breakdowns.
• Identifying and supporting corrective actions on asset/process limitations.
• Work with and install single phase / three phase electrical circuits.
• To attend training and continuous development opportunities when required.
• Continuously look to improve reliability and cost effectiveness of all assets.
• Contribution to the company objectives and values. Essential Requirements:
• Proven record of actively promoting safe working practices.
• Time served in a Maintenance Engineering role within a Manufacturing environment, ideally with a mechanical bias.
• Basic knowledge of PLC control systems.
• Ability to undertake shift work (Annualised Hours pattern*), overtime and call outs as required.
• Knowledge and understanding of 5s and lean manufacturing techniques.
• Proficient in the use of IT software for example Microsoft.
• Ability to wear personal protective equipment including hearing protection, gloves, hard hat, safety shoes and safety glasses.
• Ability to pass a drug and alcohol test and achieve a satisfactory result in a company medical. Essential Personal Qualities:
• Effective communication skills.
• Ability to work well within a team environment and independently.
• Enthusiastic and self-motivated.
• Proactive and driven.
• Strong interpersonal skills. Desirable Requirements:
• Multi skilled Engineering experience.
• Qualified in IEE Regulations (18th edition).
JOB REQUIREMENTS KEY RESPONSBILITIES Annualised Hours Pattern* Core work hours are Monday to Friday 7am – 3pm, with a 30-minute unpaid lunch break (equating to 37.5 hours per week). Whilst working the Maintenance shift pattern, you are paid to work the following shifts below each year: -10 Weeks of Back Shifts (1 in 5) - 3pm – 11pm (with a 30-minute unpaid break) - 5 Weeks of Night Shifts (1 in 10) - 11pm – 7am (with a 30-minute unpaid break) - 10 Weekends - Saturday 7am – 3pm and Sunday 7am – 3pm* (with a 30-minute unpaid break). Where you are rostered to work the weekend, you will be allocated 2 ‘off days’ as your rest days mid-week. - Bank Holidays - You are required to work any bank holidays that fall immediately before and/or after your duty weekend shift. You will be given the relevant number of days worked on bank holidays back in lieu to be taken at a time agreed with your Team Leader. Christmas Day, Boxing Day and New Year’s Day bank holidays will be covered on a voluntary basis, as patrol only. - In addition to the working hours above, individuals can volunteer to be on ‘standby’ with an associated ‘on call’ payment over the weekends....Read more...
The role
Fugro are looking for an Engineer to join its Structural Monitoring team based in Aberdeen, part of the Fugro Marine Asset Integrity (MAI) business line.
The team is passionate about data and provides asset integrity solutions for offshore energy structures. We acquire, process and analyse Geo-Data to unlock insights, helping our clients manage their risk and ultimately creating a safe and liveable world.
The office is the centre of excellence within Fugro for the work and projects delivered worldwide in conjunction with other regional Fugro offices. You will be involved in the entire lifecycle of projects, from design, through assembly and test, site work planning, to data processing and reporting. This is an interesting, rewarding and varied role where you can develop further skills and make a difference.
You will be working with a team of specialists including engineers, technicians and field staff. There would also be interaction with clients, suppliers and other stakeholders.
Note that occasional offshore site work, including abroad, may be required.
This job is for you if:
You are happy to prioritise health and safety above all else
You want to use your abilities to make a difference, and further your skillset
You are both client and delivery focussed, with a can-do attitude
You are interested in developing solutions to solve real-world client problems
You are happy working where there is an expectation of getting things done
You have excellent attention to detail
You are interested in gaining practical knowledge of data acquisition or analysing data
You are interested to learn how to use Matlab to process data
Here’s what a typical day would be like:
Project delivery – a variety of work depending on the nature and phase of the project. Examples: design calculations; testing and troubleshooting sensor packages and data acquisition equipment; writing procedures for testing and installation; generate quality control documentation, and manage health and safety responsibilities.
Propose suggestions for improvement. Preparing and checking of technical documentation, designs and calculations in support of projects.
Safety is our number one priority, so you will be part of our positive safety culture, including raising, reviewing and complying with risk assessments.
What you’ll need to thrive in this role
We're looking for an Engineer to join our dynamic & innovative team of specialists, enabling us to continue providing an outstanding level of service to our broad range of clients. To help us achieve this, we'd love you to have the following in your arsenal of experience. We would also encourage you to include a cover letter as part of your application. It’s your chance to tell us why you would be a brilliant addition to our team:
A degree in a relevant engineering or science discipline (e.g. Mechanical Engineering, Aeronautical or Physics) is required.
Someone with a keen interest in learning new skills.
Attention to detail in everything
A desire to solve real-world problems.
About Us
Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.
What we offer
Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team.
An environment where you can use your skills and actively contribute to project delivery but also innovation
Career & training opportunities both nationally and internationally.
Competitive salary accompanied by an attractive package including contributory pension scheme
Flexible working hours and the potential to work 2 days a week from home in accordance with your manager and corporate policies. (amend as required)
Option to lease an electric car
Generous holiday allowance
After 6 months, the potential to work 2 days a week from home in accordance with company hybrid working policies
An externally-provided Employee Assistance Program
Our view on diversity, equity and inclusion
At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.
Disclaimer for recruitment agencies:
Fugro does not accept any unsolicited applications from recruitment agencies. Acquisition to Fugro Recruitment or any Fugro employee is not appreciated
Apply for this ad Online!....Read more...
