This is a supportive role within the Administration team and its primary purpose is to provide general administrative assistance to the legal teams in the Huddersfield office whilst working towards a Business Administration Level 3 qualification.
The tasks and duties listed below are intended to describe the general nature and responsibilities of this role and it is anticipated that they will evolve over time. These duties are not intended to be an exhaustive list and the post holder is expected to undertake any reasonable request from a Partner, or other appropriate Manager.
MAIN RESPONSIBILITIES/DUTIES
Communicate regularly and openly with the Office Co-Ordinator to keep her updated on tasks, problems that arise, etc
Accurately scan correspondence and documentation where appropriate
Carry out photocopying and support secretaries with compiling legal documentation eg trial bundles etc
Dealing with the archiving of files and documents and providing advice and support to the other offices on archiving queries and management
Monitor printers and fax machines, replenishing with paper in a timely and routine manner
Monitor stationery levels and advise the Office Co-Ordinator or their nominated deputy as necessary, when stock levels fall
Assist with the opening post, accurately recording receipt of important documents, and ensure correct and timely distribution to the relevant lawyer/team
Act as the first point of contact for office/facilities repair issues in Huddersfield, liaising with and seeking guidance from the Office Co-Ordinator to resolve them
Ensure DX, Royal Mail post is collected/delivered to the post area and/or distributed to the relevant lawyer or department promptly;
Identify unreferenced post
Allocate and distribute inbound faxes and emails to the relevant lawyer/team/department
Answer telephone calls (internal/external) take appropriate messages; and archive completed files
Carry out the weekly fire alarm test for the office and report any issues and incidents promptly to the Office Co-Ordinator
Maintain an accurate, up-to-date list of information for the office e.g. First Aiders, Fire Marshalls, etc
Make local urgent ‘by hand’ deliveries e.g. to Court
Take the banking for the Accounts team
Provide cover for the Reception team during lunchtimes, very busy periods, and during times of holiday and sickness. This will include answering telephone calls and passing the caller on to the relevant person (for any office), greeting visitors and clients
Support the reception team with meeting room management (organising meeting room spaces, providing refreshments, ensuring stationery supplies are maintained in each room, etc)
Continuously look for ways to improve the office support/facilities services to the Huddersfield office and wider firm, suggesting ideas to the Office Co-Ordinator
Comply with the requirements of the apprenticeship programme
Training:The successful candidate will be enrolled on the Level 3 Business Administrator Standard, which is equivalent to 2 A Levels.
As a business administration apprentice, you will complete the following qualifications as part of your apprenticeship:
Level 3 Business Administrator Standard Apprenticeship
Level 2 Functional Skills maths and English if equivalents are not already achieved
You will also develop the skills, knowledge and behaviours required to work within an office environment
This apprenticeship is delivered in the workplace and 20% of your working time will be dedicated towards training and learning new skills
You will be allocated a tutor who will provide you with personal support and assessment at pre-arranged times
Assessment is through a variety of methods including observations in the workplace, witness testimonies, product evidence and professional discussions
All evidence will be logged to your electronic portfolio
Training Outcome:
Great prospects for progression to a full-time position for the right candidate
Employer Description:As a leading law firm, we handle a wide variety of interesting work that’s often high value and complex, giving you a prime opportunity to develop your career. We focus on providing exceptional service for clients and have a supportive, collaborative culture to ensure each member of staff plays a crucial part in this. Everyone is valued highly here. With over 150 staff, many of our lawyers are specialists in complex fields or have considerable experience in high-profile and national cases. We have offices in Leeds, Bradford and Huddersfield.
We want you to excel so you can achieve your career ambitions and we can provide the very best service possible. Whatever your role, we encourage you to develop your skills and offer suitable training to help you fulfil your potential.
Every employee has an important role in our success, and we’re interested to hear what you can contribute and what you’d like to achieve with us.Working Hours :Monday to Friday - office hours to be discussed at interview.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Our client is an international manufacturing and materials processing organisation, with multiple sites across the UK . This position will focus upon their manufacturing facilities in the North of England - Cheshire and Yorkshire, in which you will be responsible for all Health, Safety, Environmental and Quality requirements across 5 manufacturing plants.
Within this position you will take responsibility for both the strategic development and pragmatic application of HSEQ processes and systems, by influencing and engaging with key stakeholders across the business from operations and site leadership teams, through to production operative level.
What’s on offer as HSEQ / SHEQ Coordinator:
Hybrid working available
Further personal development opportunities, supported with accredited training
Base salary circa £50k per annum, plus company car allowance £500 per month
Life Assurance
Enhanced holiday scheme
Pension etc
The role will be focused around the development of the company wide Health and Safety / SHEQ strategy ensuring legislative requirements are met, whilst developing HSEQ culture. Creating and making policy that is lived and breathed within the organisation through systematic and strategic cultural change, engaging with teams and key stakeholders to work collaboratively in developing pragmatic Health and Safety solutions, embedding a culture of ownership across the organisation, by winning hearts and minds.
Key requirements of SHEQ Coordinator:
Experience of managing and setting Health, Safety, Environmental and Quality strategy within a heavy industrial manufacturing, or engineering and environment.
The ability to switch between working strategically and tactically, at time providing hands on support in the delivery of all H & S activities, down to supporting sites with RAMS and SOPs
Strong H&S knowledge, supported with Nebosh certificate qualification, or above, or equivalent in Health and Safety
Experience of developing, implementing and continuously improving management systems in line with ISO accreditation requirements - OHSAS 18001, ISO 45001, 14001 9001 etc
Experience of developing implementation and improvement plans for the whole suite of Health and Safety activities
Multi-site experience is desirable in delivering Health and Safety policy and culture, but not essential
Experience of working within an industrial, ideally heavy industry related environment
Full UK driving license
APPLY NOW! ....Read more...
Our client is an international manufacturing and materials processing organisation, with multiple sites across the UK . This position will focus upon their manufacturing facilities in the South of England - Gloucestershire, Northamptonshire, and Sussex in which you will be responsible for all Health, Safety, Environmental and Quality requirements across 5/6 manufacturing plants.
Within this position you will take responsibility for both the strategic development and pragmatic application of HSEQ processes and systems, by influencing and engaging with key stakeholders across the business from operations and site leadership teams, through to production operative level.
What’s on offer as HSEQ / SHEQ Coordinator:
Hybrid working available
Further personal development opportunities, supported with accredited training
Base salary circa £50k per annum, plus company car allowance £500 per month
Life Assurance
Enhanced holiday scheme
Pension etc
The role will be focused around the development of the company wide Health and Safety / SHEQ strategy ensuring legislative requirements are met, whilst developing HSEQ culture. Creating and making policy that is lived and breathed within the organisation through systematic and strategic cultural change, engaging with teams and key stakeholders to work collaboratively in developing pragmatic Health and Safety solutions, embedding a culture of ownership across the organisation, by winning hearts and minds.
Key requirements of SHEQ Coordinator:
Experience of managing and setting Health, Safety, Environmental and Quality strategy within a heavy industrial manufacturing, or engineering and environment.
The ability to switch between working strategically and tactically, at time providing hands on support in the delivery of all H & S activities, down to supporting sites with RAMS and SOPs
Strong H&S knowledge, supported with Nebosh certificate qualification, or above, or equivalent in Health and Safety
Experience of developing, implementing and continuously improving management systems in line with ISO accreditation requirements - OHSAS 18001, ISO 45001, 14001 9001 etc
Experience of developing implementation and improvement plans for the whole suite of Health and Safety activities
Multi-site experience is desirable in delivering Health and Safety policy and culture, but not essential
Experience of working within an industrial, ideally heavy industry related environment
Full UK driving license
APPLY NOW! ....Read more...
Our client is an international manufacturing and materials processing organisation, with multiple sites across the UK . This position will focus upon their manufacturing facilities in the South of England - Gloucestershire, Northamptonshire, and Sussex in which you will be responsible for all Health, Safety, Environmental and Quality requirements across 5/6 manufacturing plants.
Within this position you will take responsibility for both the strategic development and pragmatic application of HSEQ processes and systems, by influencing and engaging with key stakeholders across the business from operations and site leadership teams, through to production operative level.
What’s on offer as HSEQ / SHEQ Coordinator:
Hybrid working available
Further personal development opportunities, supported with accredited training
Base salary circa £50k per annum, plus company car allowance £500 per month
Life Assurance
Enhanced holiday scheme
Pension etc
The role will be focused around the development of the company wide Health and Safety / SHEQ strategy ensuring legislative requirements are met, whilst developing HSEQ culture. Creating and making policy that is lived and breathed within the organisation through systematic and strategic cultural change, engaging with teams and key stakeholders to work collaboratively in developing pragmatic Health and Safety solutions, embedding a culture of ownership across the organisation, by winning hearts and minds.
Key requirements of SHEQ Coordinator:
Experience of managing and setting Health, Safety, Environmental and Quality strategy within a heavy industrial manufacturing, or engineering and environment.
The ability to switch between working strategically and tactically, at time providing hands on support in the delivery of all H & S activities, down to supporting sites with RAMS and SOPs
Strong H&S knowledge, supported with Nebosh certificate qualification, or above, or equivalent in Health and Safety
Experience of developing, implementing and continuously improving management systems in line with ISO accreditation requirements - OHSAS 18001, ISO 45001, 14001 9001 etc
Experience of developing implementation and improvement plans for the whole suite of Health and Safety activities
Multi-site experience is desirable in delivering Health and Safety policy and culture, but not essential
Experience of working within an industrial, ideally heavy industry related environment
Full UK driving license
APPLY NOW! ....Read more...
We are currently looking for 2 x Maintenance Electricians with a leading UK manufacturer. This role is Monday to Sunday role and offers a salary of circa £50,000 as well as fantastic company benefits such as pension of up to 5%, overtime (x1.5/x2) and further training and career development opportunities with a company that values its employees.
What's in it for you as a Maintenance Electrician -
Salary dependent upon experience £50,000 + per annum.
In addition, you have a pension of up to 5%, Branded Workwear, Private Health Care, Modern Canteen /Washroom facilities.
Hours of work are Monday to Sunday – 12 hours days and 12 hours nights.
Industry leading training and career development, including health and safety training, cross-skilling and upskilling such as PLC training.
Leadership and management training for those who are keen to progress their careers and demonstrate ambition.
Job security and personal career development opportunities within a market-leading, international manufacturing organisation.
- Key responsibilities of a Maintenance Electrician -
Providing plant-wide electrical maintenance service, departmental support, and repairs on a wide range of machinery such as invertors, motors, conveyor-based systems, panels, PLC's and automation machinery
Within the position you will have the opportunity to be involved with a wide range of maintenance operations and projects, which will be supported by a wide range of training opportunities, including accredited training programs.
The ability to work within a skilled team of engineers permanently.
PPM and reactive maintenance of industrial scale production machinery.
Experience and Qualifications Required for a Maintenance Electrician -
Engineering qualified by either a full Advanced Electrical Apprenticeship (Level 3) OR NVQ Level 3 AND BTEC Level 3 in Electrical Engineering - UK equivalent Electrical Engineering qualifications to Level 3.
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities.
Previous experience in undertaking maintenance within a fast-paced manufacturing environment.
Ability to fault find, repair and provide solutions to Electrical problems.
....Read more...
B2B Sales Manager – Leading Fresh Food Supply Business – London - £40K + Benefits My client is an established business who are top of their game in supplying fresh food to their corporate clients.They are undergoing an exciting growth period and are looking for a talented B2B Sales Manager to join their team. The successful B2B Sales Manager will be responsible for driving new business, expanding market presence and growing client base.This is the perfect role for a results-driven Sales Manager who thrives in a fast-paced environment to join a reputable brand who can offer genuine opportunities for success and progression.Responsibilities include:
Take full ownership of the sales process, from prospecting and lead generation to closing deals with corporate clients and facilities management/catering companies.Build and nurture strong relationships by engaging with key decision-makers and fostering long-term partnerships.Develop and deliver compelling pitches, crafting persuasive proposals and presentations.Maintain a steady sales pipeline by tracking progress and ensuring a continuous flow of new business.Expand your network by attending industry events and identifying potential opportunities.Collaborate with marketing, operations, and customer service teams to deliver an outstanding client experience.
The Ideal B2B Sales Manager Candidate:
Should have minimum of 3 years’ experience working in B2B sales; experience in the workplace, FM or contract catering space is a bonus.Be a hungry driven salesperson who thrives on winning new business.Should be comfortable working in fast paced environments.Must have experience influencing and negotiating with all level stakeholders and maintaining strong relationships.Have a structured approach with a clear view on hitting targets.
If you are keen to discuss the details further, please apply today or send your cv to Mikey at COREcruitment dot com / mikey@corecruitment.com....Read more...
JOB DESCRIPTION
Position Summary:
Responsible for a wide variety of manufacturing and facility maintenance and repairs.
Essential Functions:
Experience in preventative maintenance, troubleshooting, and repair of mechanical and electrical systems from 24v DC to 480v AC (single and three phase), in accordance with local, state, and federal regulations. Experience with maintaining and repairing Form Fill and Seal machines (Ilpak and Triangle) 2. Automation equipment, specifically Fanuc robots, conveyors, bag check weighers, palletizers, wrappers, and carton-bag machines. Experience repairing pumps, chemical bulk storage and mixing tanks and industrial mixers. Perform daily preventative maintenance and repair on facilities and production equipment. Perform system repairs including filters, belts, bearings, and drives. Ability to learn and complete documentation of work performed, including maintaining spare parts inventory in computer-based software. Maintain strong commitment to safety, as well as document daily EPA readings and perform routine safety repairs/inspections.
Minimum Requirements:
High School Diploma 5 years' machine maintenance experience in an Industrial Environment.
Preferred Requirements:
Experience in pneumatics and welding a plus.
Physical Requirements:
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk and reach with hands and arms. The employee is occasionally required to sit; stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. May have occasional exposure to various manufacturing chemicals. This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances. Apply for this ad Online!....Read more...
An exciting opportunity has arisen for CNC Operator / CNC Setter to join a well-established engineering firm. This full-time role offers excellent benefits and a salary range of £12.50 - £22.00 per hour.
As a CNC Operator / CNC Setter, you will be setting and operating CNC machinery to produce precision-engineered parts to tight tolerances.
You will be responsible for:
* Manufacturing precision components to consistently high standard.
* Interpreting complex engineering drawings with accuracy.
* Producing parts in line with scheduled production times.
* Contributing to the ongoing improvement of processes and workflows.
* Maintaining a clean, organised, and efficient working environment.
* Ensuring the safety and well-being of yourself and colleagues by adhering to all health and safety procedure
What we are looking for:
* Previously worked as a CNC Operator, Machine Operator, CNC Machinist, CNC Miller, CNC Setter, CNC programmer or in a similar role.
* Background in CNC milling, turning, or grinding.
* Capability to set and operate CNC machinery with minimal supervision.
* Experience working with control systems such as Mazatrol, Fanuc, or Heidenhain.
* Based within a commutable distance of the site.
* Must have right to work in the UK.
What's on offer:
* Competitive pay
* 5 weeks holiday plus 8 bank holidays
* Company pension
* Life assurance cover
* Company-provided uniform and PPE, regularly updated
* On-site parking, canteen facilities, and vending machines
* Opportunities for shift work to support work/life balance
* A supportive workplace culture with training and development
* Participation in employee engagement initiatives and internal events
Apply now for this exceptional CNC Operator opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The intern will participate in the standard corporate summer internship program and gain general knowledge and experience within all aspects of the Tremco CPG career and support pathways. The intern will help support the following functional areas: Systems, Production, Inspections and Program Management.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
This intern will learn and help support a wide variety of tasks including but not limited to: Developing training documentation Data gathering, research, tracking and cleanup Will learn different softwares such as, Monday.com, Smartsheet, OLI, Olympia, possibly Salesforce and SAP, to support assigned tasks. Will also help create, track, update projects, programs or account information across four functional business areas Will assist with miscellaneous tasks as needed
EDUCATION AND EXPERIENCE:
Active college students eligible. This internship may be of more interest to students with studies related to any one or all of the following: Business Administration, Business Management, Project/Construction Management, Finance/Accounting.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Common Microsoft applications such as Outlook, Excel, Word and Power Point would be helpful but are not required for success. This intern will be trained in the software required to perform assigned tasks.
COMPENSATION:
This internship will run for approximately 8-10 weeks during the summer, beginning in June and concluding in August. The hourly rate for applicants in this position generally ranges between $17 and $21.50. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
MEP Project Manager – Data Centre & Life Science - LondonAA Euro Group are recruiting for an experienced MEP Project Manager to join a Tier 1 Main Contractor known for delivering complex, high-specification projects across Ireland and the UK. This role is specifically focused on leading the MEP delivery of Data Centres and Life Sciences facilities so previous experience in this sector is beneficial.You’ll play a key role in managing MEP works from pre-construction through to commissioning and handover, ensuring systems are designed, installed, and delivered to the highest standards, in line with stringent compliance and operational requirements.Key Responsibilities
Lead MEP coordination, delivery, and handover of complex technical projects within live or high-spec environmentsManage M&E subcontractors to ensure works are progressing safely, on programme, and to specificationOversee technical reviews of design documents and drive early-stage value engineering where appropriateLiaise with design consultants, client technical teams, and internal departments to align on all services-related aspectsChair MEP coordination meetings and resolve technical or sequencing clashes using BIM and detailed planningEnsure commissioning and integrated systems testing are planned early and executed flawlesslyMonitor and manage compliance with all regulatory, health & safety, and project-specific requirementsReport on progress, budgets, risks, and programme status to senior stakeholders and client representatives
Requirements
Degree-qualified in Mechanical, Electrical, or Building Services Engineering OR a strong trade background with proven MEP leadership experience5–10 years’ experience in a similar MEP-focused role, ideally within Data Centres, Pharmaceutical, or Cleanroom environmentsPrevious experience delivering projects for hyperscale or co-location data centres, GMP/pharma clients, or other critical infrastructure is highly desirableKnowledge of commissioning protocols, integrated systems testing (IST), and regulatory compliance in regulated environmentsProficient in reading technical drawings and coordinating via BIM platformsExcellent stakeholder management, communication, and team leadership skillsStrong commercial awareness and scheduling abilities
INDWC....Read more...
Periodontist jobs in Melbourne, Victoria, Australia. Join a Premier Dental Practice in Melbourne's CBD - State-of-the-art practice, large multi-disciplinary team, High earnings, Visa Sponsorship available. Zest Dental Recruitment has an exceptional opportunity for a specialist Periodontist.
Periodontist
Melbourne CBD, Victoria, Australia
Full or part-time
Visa Sponsorship available for Metro Melbourne
Superb financial package, high income
Large patient base, very busy with Exceptional Google reviews
Superb financial package, high income
State-of-the-art practice with exceptional equipment
Located in a beautiful building
Specialist multi-disciplinary clinical team
Ability to use your full breadth of clinical skills in a collaborative environment
Reference: DW6710
Zest Dental Recruitment is seeking a talented Specialist Periodontist to join a renowned dental practice in the heart of Melbourne's CBD. This award-winning practice offers a luxurious setting, state-of-the-art facilities, and a supportive team environment.
The practice is exceptionally busy and you will work collaboratively with other specialists, providing Implant treatments, bone grafting, etc. You will be busy from your first day and expertly supported by an established team of experienced professionals. As a dedicated periodontist, you will have your ambitions well looked after.
Successful candidates will be Specialist Periodontists and AHPRA registered, or be able to register as a specialist having qualified from Australia, UK, Ireland, or Canada*, or be registered in or qualified from New Zealand, or you will have undertaken the ADC examination. Visa sponsorship is available if required. For further information regarding this position, confidential enquiries can be made by submitting your CV to ZEST Dental. All applications and enquiries will be treated in the strictest of confidence.Zest Dental has been helping dentists and dental practices in Australia, the UK, and throughout the World to find their perfect job match since 2006.
Contact: Darran WalentaEmail: Telephone: UK: +44 114 238 1729 | AU: +61 730 534 271....Read more...
General Manager Couple – The Bahamas – Up to $120k Tax FreeWe’re partnering with a beautiful, high-end resort in the Bahamas that’s looking for an experienced General Manager Couple to join their leadership team. This is a hands-on, live-on-site role, perfect for a duo ready to lead day-to-day operations and uphold the standards of this boutique property.Perks and Benefits
$100K–$120K USD net salary, with no income tax in The BahamasFully furnished private residence with utilities, meals, and annual return flights includedWork permit, time off, and travel covered, plus the chance to be part of an award-winning, world-class resort
The RoleThis role leads the overall resort experience, ensuring warm, high-touch service across all departments including guest services, F&B, housekeeping, activities, and spa. You'll manage and support a team of 45+ staff, oversee daily operations, logistics, facilities, and contribute to financial and strategic planning. The position also plays a key role in marketing, VIP guest relations, and maintaining strong partnerships with luxury travel providers.What they are looking for:
Proven years of experience co-managing a luxury boutique hotel or remote resortPrior experience in the Caribbean or tropical island setting preferredPassion for delivering exceptional guest experiences in a luxury environmentStrong operational skills with complementary focus areas (e.g., F&B and admin/logistics)Respect for and understanding of local culture and customs
If you are keen to discuss the details further, please apply today or send your cv to Danny at COREcruitment dot comDue to the volume of application, we may not be able to provide feedback to all applicants. If you haven’t heard from us within 2 weeks, please consider your application unsuccessful. Nevertheless, feel free to reach out!....Read more...
OFFERING A £3,000 WELCOME BONUSWe are seeking an enthusiastic Staff Nurse to join the inpatient Surgical ward team at our client's Acute Hospital site based in beautiful Bath, Somerset. The ward is predominantly elective surgery with occasional non-surgical patients. This is a full-time permanent post but we are open to hearing from candidates seeking to negotiate a part-time hours opportunity. This is an award-winning hospital, led by some of the South-West's most experienced consultants supported by 24/7 RMO cover on-site.Rated 'outstanding' for caring - this unique centre of excellence was a long-established independent sector hospital, acquired through investment by the NHS in June 2021.The Hospital has 28 en-suite single inpatient beds, 22 day-case beds and 5 ambulatory care beds. Facilities include; 9 consulting rooms, 4 state-of-the-art operating theatres (2 with laminar flow), a JAG accredited Endoscopy suite, a dedicated cardiology suite and intervention treatment room.The dedicated physiotherapy department has a gym and four treatment rooms.The Digital diagnostic unit includes CT, MRI, General X-ray and UltrasoundPerson requirementsRegistered Nurse with NMC registration.Current or recent Surgical Ward experience.Newly or soon-to-qualify Nurses with Surgical Ward placement in final year and a desire to develop further in a multi-speciality inpatient ward setting are welcome to apply.The additional benefits of working for this organisation include: - Personal pension plan- Employee discount scheme- Life assurance- Bike to work scheme- Season ticket loan- Private medical insuranceWe are a leading healthcare recruitment partner with particular expertise in the placement of the full range of Healthcare staff, including Registered Nurses.As a nurse-led consultancy our detailed understanding of the complexity of such roles places us in an excellent position to match your skills with the specific requirements of our Clinical Recruiting Managers.For an insight into Jarrodean as a Consultancy and for a summary of all current roles visit jarrodean.com If this role is not for you, please remember we offer a generous £500 Bonus for any successful friend or colleague referrals.....Read more...
An exciting opportunity has arisen for a Field Biologist / Technical Consultant to join a well-established testing and certification company. This is a field based remote role offering excellent benefits and a salary up to £38,000 plus £5,040 car allowance for 37.5 hours work week.
As a Field Biologist / Technical Consultant, you will carry out inspections and audits across diverse facilities, producing detailed reports and supporting service excellence. You will be required to travel London and Home counties.
You will be responsible for:
* Preparing accurate photographic reports for clients.
* Oversee and mentor new or junior employees.
* Ensuring timely delivery of reports in accordance with company guidelines.
* Managing and scheduling assignments across multiple locations.
* Promoting the organisation's range of services to support business growth.
What we are looking for
* Previously worked as a Field Biologist, Pest Technical manager, Pest Technical inspector, Pest Control specialist or in a similar role.
* Hands-on pest control experience across various facility types.
* RSPH Level 2 Award or Certificate in Pest Management.
* BPCA Advanced Pest Technician & Certified Field Biologist.
* Knowledge of pest biology, behaviour, and control methods, including rodents, birds, insects, and more.
* Familiarity with pesticide storage, transport, application equipment, and protective equipment.
Whats on offer:
* Competitive salary
* 25 days annual leave
* Enhanced pension contributions and life assurance
* Enhanced family leave and milestone rewards
* Company bonus scheme and regular salary reviews
* Employee Assistance Programme and 24/7 GP service
* Cycle to Work scheme
* Eye care vouchers and other health and wellbeing support
Apply now for this exceptional Technical Consultant opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Pest Control Officer / Technical Inspector to join a well-established testing and certification company. This is a field based remote role offering excellent benefits and a salary up to £34,000 plus £5,040 car allowance for 37.5 hours work week.
As a Pest Control Officer / Technical Inspector, you will carry out inspections and audits across diverse facilities, producing detailed reports and supporting service excellence. You will be required to travel London and Home counties.
You will be responsible for:
* Preparing accurate photographic reports for clients.
* Ensuring timely delivery of reports in accordance with company guidelines.
* Managing and scheduling assignments across multiple locations.
* Promoting the organisation's range of services to support business growth.
What we are looking for
* Previously worked as a Pest Control Officer, Technical Inspector, Pest Control Manager, Pest Control Inspector, Advanced Pest Control Technician or in a similar role.
* Hands-on pest control experience across various facility types.
* RSPH Level 2 Award or Certificate in Pest Management.
* BPCA Advanced Technician in Pest Management or equivalent qualification.
* Knowledge of pest biology, behaviour, and control methods, including rodents, birds, insects, and more.
* Familiarity with pesticide storage, transport, application equipment, and protective equipment.
Whats on offer:
* Competitive salary
* 25 days annual leave
* Enhanced pension contributions and life assurance
* Enhanced family leave and milestone rewards
* Company bonus scheme and regular salary reviews
* Employee Assistance Programme and 24/7 GP service
* Cycle to Work scheme
* Eye care vouchers and other health and wellbeing support
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Vehicle Spray Painter – Commercial Vans
Location: Doncaster
Permanent, 4 day working week, company is moving to a new site in the near future, full order book, OT available at premium rate
We are currently working with a Vehicle Manufacturer based in Doncaster, who are seeking a skilled and professional Vehicle Spray Painter to join their growing team, specialising in the preparation and refinishing of commercial vans. This role is ideal for an individual with a strong background in automotive paintwork who takes pride in delivering high-quality finishes on time and to specification.
As a Vehicle Spray Painter, you will play a key role in supporting our production output and upholding the high standards our clients expect.
Key Duties of the Vehicle Spray Painter:
Prepare vehicle surfaces for paint application, including thorough cleaning, sanding, and masking
Mix paint materials accurately to match colour and texture specifications using two-pack paint systems
Apply paint using spray guns and appropriate techniques, ensuring an even, high-quality finish
Monitor drying times and make adjustments in line with technical requirements
Maintain a clean, organised, and compliant workspace, including spray equipment upkeep
Experience with Speed Lining or similar protective coatings is highly advantageous
What we need from you for the Vehicle Spray Painter role:
Demonstrable experience in commercial vehicle painting, bodyshop work, or SMART repairs
Sound knowledge of paint mixing, matching, and application techniques
Proficient in the use of spray guns and workshop paint systems
Strong attention to detail and commitment to delivering consistent results
Ability to work independently and contribute positively to a fast-paced team environment
Benefits of the Vehicle Spray Painter:
Competitive salary with opportunities for overtime
Stable, full-time employment with a well-established company
Supportive working environment with modern facilities and equipment
Ongoing training and development opportunities
The chance to be part of a growing team working on a range of light commercial vehicle conversions and refurbishments
If you interested in this position, please contact Joe Reid at E3 Recruitment.....Read more...
OFFERING A 3,000 WELCOME BONUSWe are seeking an enthusiastic Operating Theatre Orthopaedic Scrub Practitioner to join the Theatre team at our client's Acute Hospital site based in beautiful Bath, Somerset. You will work as a clinical member of the Theatre Scrub team and will be responsible for the delivery of safe, high quality patient-focused care. This is a full-time substantively-employed post, although we are open to hearing from applicants seeking a part-time opportunityThis is an award-winning hospital, led by some of the South-West's most experienced consultants supported by 24/7 RMO cover on-site.Rated 'outstanding' for caring - this unique centre of excellence was a long-established independent sector hospital, acquired through investment by the NHS in June 2021.The Hospital has 28 en-suite single inpatient beds, 22 day-case beds and 5 ambulatory care beds. Facilities include; 9 consulting rooms, 4 state-of-the-art operating theatres (2 with laminar flow), a JAG accredited Endoscopy suite, a dedicated cardiology suite and intervention treatment room.The dedicated physiotherapy department has a gym and four treatment rooms.The Digital diagnostic unit includes CT, MRI, General X-ray and UltrasoundPerson requirementsRGN or ODP with appropriate NMC/HCPC registration as applicable.At least one year Ortho Scrub experience, proficient in all major joint lists.The additional benefits of working for this organisation include: - Personal pension plan- Employee discount scheme- Life assurance- Bike to work scheme- Season ticket loan- Private medical insuranceWe are a leading healthcare recruitment partner with particular expertise in the placement of the full range of Healthcare staff, including Operating Theatres.As a nurse-led consultancy our detailed understanding of the complexity of Operating Theatre roles places us in an excellent position to match your skills with the specific requirements of our Theatre Recruiting Managers.For an insight into Jarrodean as a Consultancy and for a summary of all current roles visit jarrodean.com If this role is not for you, please remember we offer a generous £500 Bonus for any successful friend or colleague referrals.....Read more...
Are you ready to take your spacecraft operations experience to the next level? A leading UK-based space technology company is seeking a Mission Operations Engineer to join their dynamic team. This is a unique opportunity to be part of multiple innovative space missions, contributing to everything from feasibility studies and system development to launch, LEOP, mission execution, and decommissioning.
You'll work across all phases of mission development, integrating responsibilities typically divided among multiple roles Spacecraft Operator, Controller, Analyst, Operations Engineer, and Systems Engineer. If youre excited by the idea of working in a hands-on, fast-moving, and impact-driven environment, this could be the ideal role for you.
(Relocation support & visa sponsorship can be provided if required)
Key Responsibilities:
- Execute routine and critical real-time spacecraft operations
- Act as Systems Operations Engineer (SOE), Mission Planner, and Spacecraft Controller across mission phases
- Develop operational tools, scripts, and software to enhance operational efficiency and safety
- Contribute to planning, scheduling, and documentation (e.g., procedures, user manuals, ops plans)
- Support system-level and subsystem-level reviews (PDR, CDR, ORR, etc.)
- Participate in on-call support, health and performance analysis, anomaly investigations, and rehearsal campaigns
- Innovate new operational concepts and help implement scalable, multi-mission solutions
Essential Skills & Experience:
- Degree in a relevant engineering discipline
- 35 years experience in real-time satellite operations, ideally in LEO missions
- Strong knowledge of satellite subsystems (especially AOCS/GNC or OBDH)
- Experience with mission control systems and procedure development
- Proactive, detail-oriented, and adaptable in a small-team environment
- Fluent in English (CEFR Level B2 or TOEIC 700+)
Desired (Not Essential):
- Familiarity with SCOS-2000 mission control systems
- Experience in formation flying or proximity operations
- Understanding of flight dynamics, ECSS standards, and mission prep tools
Benefits:
- Flexible working around core hours & hybrid work model
- Optional 9/75 working pattern
- 25 days holiday (increasing with service) & bank holidays
- Private healthcare & life insurance
- Relocation support & visa sponsorship
- Brand new office and cleanroom facilities
- Supportive, international team with regular social events
This role is perfect for someone passionate about pushing the boundaries of how modern spacecraft are operated. If youre looking to join a collaborative, mission-focused environment where your work will have real-world impact in space sustainability and in-orbit services, apply now!....Read more...
An exciting opportunity has arisen with a market-leading chemical manufacturing company for the position of Service Engineer, with a primary focus on the installtion projects within the Industrial Laundry industry. This field based role places the successful candidate at the heart of the laundry division across the United Kingdom & Ireland, joining a dynamic and evolving workforce that has been at the forefront of chemical manufacturing for over 70 years!
To be successful as a Service Engineer, candidates must bring strong technical expertise particularly in handling equipment such as heat exchangers, water and energy recovery systems, steam systems and PLC control processes. The Service Engineer will be instrumental in supporting key projects and delivering on-site service at customer facilities.
Responsibilities of the Service Engineer:
Install and maintain all aspects of water and energy recovery systems, including mechanical and electrical components, with the ability to provide technical troubleshooting as needed.
Conduct site visits to assess, optimise, and enhance water and energy equipment at customer locations.
Ensure all necessary risk assessments, method statements, and flow diagrams are completed before commencing work on-site.
Commission water and energy equipment to the agreed specifications.
Manage small- to medium-scale projects, ensuring installations meet or exceed best practice standards.
Perform site surveys and technical visits, both independently and alongside contractors to assess project feasibility and scope.
Maintain comprehensive project documentation.
Qualifications Required for the Service Engineer:
Experience in a similar installation or project based role is essential to be successful as the Service Engineer.
Electrical Qualifications (18th Edition is desirable)
Previous experience in an industrial/commercial laundry setting or within the water treatment industry is highly desirable.
The role requires national travel across the UK & Ireland, with overnight stays when necessary.
In addition to a competitive salary, the Service Engineer will benefit from a comprehensive package such as Company Car, Company Pension (4% contribution with 5% company contribution), additional annual leave days accrued for length of service, and an annual discretionary bonus! If you believe you have the right skill set and experience for the role, please click on the link below to apply directly!....Read more...
We are currently looking for 2 x Maintenance Electricians with a leading UK manufacturer. This role is Monday to Sunday role and offers a salary of circa £50,000 as well as fantastic company benefits such as pension of up to 5%, overtime (x1.5/x2) and further training and career development opportunities with a company that values its employees.
What's in it for you as a Maintenance Electrician -
Salary dependent upon experience £50,000 + per annum.
In addition, you have a pension of up to 5%, Branded Workwear, Private Health Care, Modern Canteen /Washroom facilities.
Hours of work are Monday to Sunday – 12 hours days and 12 hours nights.
Industry leading training and career development, including health and safety training, cross-skilling and upskilling such as PLC training.
Leadership and management training for those who are keen to progress their careers and demonstrate ambition.
Job security and personal career development opportunities within a market-leading, international manufacturing organisation.
- Key responsibilities of a Maintenance Electrician -
Providing plant-wide electrical maintenance service, departmental support, and repairs on a wide range of machinery such as invertors, motors, conveyor-based systems, panels, PLC's and automation machinery
Within the position you will have the opportunity to be involved with a wide range of maintenance operations and projects, which will be supported by a wide range of training opportunities, including accredited training programs.
The ability to work within a skilled team of engineers permanently.
PPM and reactive maintenance of industrial scale production machinery.
Experience and Qualifications Required for a Maintenance Electrician -
Engineering qualified by either a full Advanced Electrical Apprenticeship (Level 3) OR NVQ Level 3 AND BTEC Level 3 in Electrical Engineering - UK equivalent Electrical Engineering qualifications to Level 3.
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities.
Previous experience in undertaking maintenance within a fast-paced manufacturing environment.
Ability to fault find, repair and provide solutions to Electrical problems.
....Read more...
Our client is an international manufacturing and materials processing organisation, with multiple sites across the UK . This position will focus upon their manufacturing facilities in the North of England - Cheshire and Yorkshire, in which you will be responsible for all Health, Safety, Environmental and Quality requirements across 5 manufacturing plants.
Within this position you will take responsibility for both the strategic development and pragmatic application of HSEQ processes and systems, by influencing and engaging with key stakeholders across the business from operations and site leadership teams, through to production operative level.
What’s on offer as HSEQ / SHEQ Coordinator:
Hybrid working available
Further personal development opportunities, supported with accredited training
Base salary circa £50k per annum, plus company car allowance £500 per month
Life Assurance
Enhanced holiday scheme
Pension etc
The role will be focused around the development of the company wide Health and Safety / SHEQ strategy ensuring legislative requirements are met, whilst developing HSEQ culture. Creating and making policy that is lived and breathed within the organisation through systematic and strategic cultural change, engaging with teams and key stakeholders to work collaboratively in developing pragmatic Health and Safety solutions, embedding a culture of ownership across the organisation, by winning hearts and minds.
Key requirements of SHEQ Coordinator:
Experience of managing and setting Health, Safety, Environmental and Quality strategy within a heavy industrial manufacturing, or engineering and environment.
The ability to switch between working strategically and tactically, at time providing hands on support in the delivery of all H & S activities, down to supporting sites with RAMS and SOPs
Strong H&S knowledge, supported with Nebosh certificate qualification, or above, or equivalent in Health and Safety
Experience of developing, implementing and continuously improving management systems in line with ISO accreditation requirements - OHSAS 18001, ISO 45001, 14001 9001 etc
Experience of developing implementation and improvement plans for the whole suite of Health and Safety activities
Multi-site experience is desirable in delivering Health and Safety policy and culture, but not essential
Experience of working within an industrial, ideally heavy industry related environment
Full UK driving license
APPLY NOW! ....Read more...
Our client is an international manufacturing and materials processing organisation, with multiple sites across the UK . This position will focus upon their manufacturing facilities in the South of England - Gloucestershire, Northamptonshire, and Sussex in which you will be responsible for all Health, Safety, Environmental and Quality requirements across 5/6 manufacturing plants.
Within this position you will take responsibility for both the strategic development and pragmatic application of HSEQ processes and systems, by influencing and engaging with key stakeholders across the business from operations and site leadership teams, through to production operative level.
What’s on offer as HSEQ / SHEQ Coordinator:
Hybrid working available
Further personal development opportunities, supported with accredited training
Base salary circa £50k per annum, plus company car allowance £500 per month
Life Assurance
Enhanced holiday scheme
Pension etc
The role will be focused around the development of the company wide Health and Safety / SHEQ strategy ensuring legislative requirements are met, whilst developing HSEQ culture. Creating and making policy that is lived and breathed within the organisation through systematic and strategic cultural change, engaging with teams and key stakeholders to work collaboratively in developing pragmatic Health and Safety solutions, embedding a culture of ownership across the organisation, by winning hearts and minds.
Key requirements of SHEQ Coordinator:
Experience of managing and setting Health, Safety, Environmental and Quality strategy within a heavy industrial manufacturing, or engineering and environment.
The ability to switch between working strategically and tactically, at time providing hands on support in the delivery of all H & S activities, down to supporting sites with RAMS and SOPs
Strong H&S knowledge, supported with Nebosh certificate qualification, or above, or equivalent in Health and Safety
Experience of developing, implementing and continuously improving management systems in line with ISO accreditation requirements - OHSAS 18001, ISO 45001, 14001 9001 etc
Experience of developing implementation and improvement plans for the whole suite of Health and Safety activities
Multi-site experience is desirable in delivering Health and Safety policy and culture, but not essential
Experience of working within an industrial, ideally heavy industry related environment
Full UK driving license
APPLY NOW! ....Read more...
A brilliant new job opportunity has arisen for a committed Registered Nurse to work in a brand new state of the art care home opened in the Holt, Norfolk area. You will be working for one of UK’s leading health care providers
The latest flagship nursing home in historic Holt is the embodiment of elegance and luxury living, combining superb facilities. We are proud to offer residential, dementia, respite and nursing care in a beautiful and well-designed setting
**To be considered for this position you must be qualified as a Registered Nurse with a current active NMC Pin**
As a Nurse your key duties include:
Accurately assess the needs of residents and identify priorities of care
Administer all medication and treatments within the NMC guidelines and company medication policy
Ensure that residents care plans are completed and maintained in conjunction with residents, relatives and other health care professionals
Report any ill-health amongst residents and make request for GP/professional visit where necessary
The following skills and experience would be preferred and beneficial for the role:
Proven experience of working in a care setting
A good team player
Well-developed time management and leadership skills
Able to show a can-do attitude always
The successful Nurse will receive an excellent salary of £24.00 per hour and the annual salary is up to £54,912 per annum. We currently have permanent vacancies for both days and night shifts available. In return for your hard work and commitment you will receive the following generous benefits:
Pension scheme
Comprehensive induction and paid training programme with career prospects
Enhanced rates for bank holidays
Recognition schemes (Employee of the Month and Company Care Awards)
Paid breaks
Refer a friend scheme
Costs for an enhanced DBS
Rewards for years of service
Uniform provided
Reference ID: 6490
To apply for this fantastic job role, please call on 0121 638 0567 or send your CV ....Read more...
ASSOCIATE DENTIST - CHESHIRE An opportunity has become available for a Dental Associate to join a Independent mixed practice located in Tarporley, Cheshire The successful applicant will be taking on a well-established low need NHS list from a departing colleague with additional high grossing private potential. We have an excellent local reputation and always strive to provide the highest standard of patient care.Full clinical freedom - meaning you can use your preferred equipment, materials, labs to deliver the best level of care to your patients. We will champion you as a self-employed clinician and ensure you always retain your unique identity.•Start Date: As soon as possible•Days: Full time / part time (Monday- Friday, with optional Saturdays for private only)•Working hours: 9am-5pm (Monday to Friday and Saturday 9am-1pm)•UDA rate: £14.50 per UDA•UDA target: Unlimited UDAs available•PVT split: 50% / Lab Split: 50%•NHS/PRIVATE earning potential based on £100,000-£160,000. Private earning potential is unlimited.Practice information:The practice has been owned by the same family since establishing in 2001.The practice has recently undergone extensive redevelopment; the existing three surgeries have been updated with new dental chairs. We have invested in a new state of the art decontamination room. The upstairs of the building has been converted into a new private waiting room and consultation room.We have 4 fully air-conditioned surgeries, they are fully computerised with digital radiographs, OPG, digital scanner and SOE software. We use the highest quality of materials and equipment, including rotary endo. Our practice also has the facilities to offer facial aesthetics, Composite bonding, Clear/fixed aligners, implant restorations, boutique whitening, Air Polish.Location information:The practice is located in the affluent village of Tarporley one of Cheshire’s most attracted villages. Tarporley high street boasts many excellent bars, restaurants, coffee shops and high-end fashion retailers. Two championship golf courses and excellent primary and high schools.Free off site private parkingAll candidates must fully qualified, GDC registered with an active performer number and UK experience.....Read more...
Install, maintain and repair water services e.g. heating pipework, radiators, boilers
Install, maintain and repair ductwork systems e.g. ducts, extract grilles
Diagnose and rectify faults on a range of heating & ventilating systems and equipment
Commission systems to ensure maximum efficiency against design specification
Training:You will split your time between working alongside a seasoned mentor and studying block release with our training provider. You will work towards your NVQ Level 2 in Building Services Engineering as well as gaining essential hands on experience on site. You will also have the opportunity to attend various additional courses throughout your tenure with us.Training Outcome:Upon completion you will be a fully qualified engineer. Depending on what you choose to specialise in you may go onto the tools as a heating and ventilation engineer, or work in the office as part of the design team or project management team. The majority of our apprentices stay on with us and have forged a successful career.Employer Description:CF Roberts have been providing Electrical Services since the 1935 in Hereford. In 1997 CF Roberts moved its head office to its current location within Cheltenham, the larger site providing the facilities necessary for training and growth. In 2005 CF Roberts moved into Mechanical services, an area which we are applying substantial resources. The company is still a wholly owned family business following the original business ethics laid down by its founder Cyril Roberts.
CF Roberts is a medium sized electrical and mechanical contractor. Carrying out works from £100 to £7.0 million in value. The company operates in 3 areas. Major works, covering New Build and ‘protype’ M&E projects up to 5m in value. Retail & Leisure, specialising in fit-out and refurbishment specialising in framework/multiple site agreements up to £3m in value, plus a 3rd sector concentrating on Minor works, roll out programmes and FM.Working Hours :Predominantly Monday to Friday, with a guaranteed minimum of 37.5 hours per week, however working & staying away from home and working evenings & weekends are a key part of the job. Shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative,Physical fitness....Read more...
