Installation Engineer
Wolverhampton
£30,000 - £34,000 Basic + Overtime (Earnings of £45,000+) + Regular Training + Progression + Vehicle + Mobile + Pension
Work an installation engineer role for the best and most successful company in their industry, whilst getting specialist training and earning over £45,000 with overtime. You’ll get recognition and be rewarded for your work with a company that will treat you as more than just another number.
This company are specialists in the repair, maintenance and calibration of a vast range of mechanical machinery and equipment used in the automotive industry UK wide. Due to continued growth and an overflowing order book, they are looking for an installation engineer to join their highly experienced team. You’ll have opportunity to develop your skills through continuous training and earn over £45,000 with consistent overtime.
Your Role As An Installation Engineer Will Include:
* Installation Engineer role - Product training given* Mechanical and some basic electrical installation of MOT equipment / Garage equipment - brake testers / vehicle lifts etc.* Regional cover role - NO STAY AWAY!
As the Successful Installation Engineer You’ll Have:
* Good mechanical engineering knowledge and skills with installation experience* Background as a mechanical / Installation engineer / field service / technician (or similar) * Ex-forces engineers welcomed* Live around the Wolverhampton area and happy to travel as a Installation Engineer
Please contact Charlie Auburn for immediate consideration
Keywords: Installation engineer, Field service engineer, service engineer, engineer, mobile engineer, field engineer, field service, mechanical, electrical, install, garage equipment, REME, Army, Ex forces, Navy, RAF, Wolverhampton, West Midlands
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Field Service Engineer Bromsgrove£40,000 to £45,000 Basic + Training + Job satisfaction + Van + Fuel Card + Personal use + Variety + Job satisfaction + Job For Life + Recession Proof Industry + Very Low Staff Turnover + PackageSolidify your career as a field service engineer within a highly skilled team for a long standing and well respected company in this industry. Enjoy working for an established business where you’ll be looked after, treated as more than just another number and have a job for life!This company specialises in maintenance and installation of various types of material handling equipment across the UK. Due to continued growth and expansion they are looking for a field service engineer to join their existing team. Thrive working for a company who trusts and respects their staff where you’ll truly feel part of a team.Your Role As Field Service Engineer Will Include: * Home based field service engineer role covering UK wide * Carry out service and breakdowns of material handling and lifting equipment (Mechanical engineering) * Occasionally assist the installation team when needed * Occasional stay away / overnight stays paidThe Successful Field Service Engineer Will Need To Have: * Experience as an installation / maintenance / mechanical / field service engineer or similar * Experience with material handling / lifting / mechanical equipment or machinery(prefferred)* UK driving licence * Live around the Bromsgrove area or nearby and happy to travel as a field service engineerPlease apply or contact Rebecka Van Ristell for immediate considerationKeywords: field service engineer, field installation engineer, installation engineer, service engineer, field engineer, mobile engineer, material handling, lifting, LEEA, pneumatic engineer, hydraulioc engineer,mechanical, mechanical engineer, Bromsgrove, Birmingham, West Midlands, Redditch, Kidderminster. This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. ....Read more...
Field Service Engineer
Wolverhampton
£30,000 - £34,000 Basic + Overtime (Earnings of £45,000+) + Regular Training + Progression + Vehicle + Mobile + Pension
Work an Field Service Engineerrole for the best and most successful company in their industry, whilst getting specialist training and earning over £45,000 with overtime. You’ll get recognition and be rewarded for your work with a company that will treat you as more than just another number.
This company are specialists in the repair, maintenance and calibration of a vast range of mechanical machinery and equipment used in the automotive industry UK wide. Due to continued growth and an overflowing order book, they are looking for an Field Service Engineer to join their highly experienced team. You’ll have opportunity to develop your skills through continuous training and earn over £45,000 with consistent overtime.
Your Role As An Field Service Engineer Will Include:
* Installation Engineer role - Product training given* Mechanical and some basic electrical installation of MOT equipment / Garage equipment - brake testers / vehicle lifts etc.* Regional cover role - NO STAY AWAY!
As the Successful Field Service Engineer You’ll Have:
* Good mechanical engineering knowledge and skills with installation experience* Background as a mechanical / Installation engineer / field service / technician (or similar) * Ex-forces engineers welcomed* Live around the Manchester / North West area and happy to travel as a Field Service Engineer
Please contact Charlie Auburn for immediate consideration
Keywords: Installation engineer, Field service engineer, service engineer, engineer, mobile engineer, field engineer, field service, mechanical, electrical, install, garage equipment, REME, Army, Ex forces, Navy, RAF, Wolverhampton, West Mildands,
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Field Service Engineer Manchester £35,000 – £45,000 Basic + Van + Private Healthcare + 25 Holiday + Fuel Card + Pension
Are you an experienced vehicle wash engineer looking to join a supportive, family-run business where you’re valued and not just a number? This is a great opportunity to work for a fast-growing UK leader in wash equipment design, manufacture, installation, and servicing, with excellent career progression from a Field Service Engineer into senior roles.
As a Field Service Engineer, you’ll work on both planned and reactive maintenance as well as installation of specialist HGV wash systems across the North and occasionally further afield. You’ll receive full onboarding and shadowing support, along with ongoing training on electrical, hydraulic, and PLC-controlled systems.
Your Job as a Field Service Engineer will include:
* Servicing, maintaining, and installing HGV wash equipment across customer sites * Diagnosing and repairing mechanical, electrical, and hydraulic faults * Occasional week-long installation projects (with notice, accommodation provided) * Using tooling, relays, wiring systems, panels, PLC controls, and hydraulics * Working Monday to Friday (8–4), with flexible start/finish options
As A Field Service Engineer You Will Have:
* Proven vehicle wash industry experience (essential)* NVQ Level 2/3 in engineering, electrical, mechanical, or related discipline * Strong hands-on skills in tooling, hydraulics, plumbing, and wiring systems * Ability to work independently and deliver high-quality workmanship * Full UK driving licence and willingness to travel within the MidlandsApply now or call Billy on 07485163030 for immediate consideration! Keywords: service engineer, installation engineer, vehicle wash equipment, HGV wash systems, commercial wash equipment, field service engineer, electrical engineer, mechanical engineer, PLC control systems, hydraulics, Manchester, NVQ Level 3, maintenance engineer, wash plant engineer, industrial cleaning systems, pump systems, relay wiring, family run business, engineering jobs ManchesterThis vacancy is being advertised by Future Engineering Recruitment Ltd.The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Position: Electrical Service Engineer (SAT/NAVCom)
Job ID: 2394/1
Location: Portsmouth
Rate/Salary: To Be Confirmed Upon Application
Type: Permanent / Full Time
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy, and Aerospace sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The job description below will outline this position of: Electrical Service Engineer (SAT/NAVCom)
Typically, this person will visit vessels predominantly in the UK (however, international travel will be open), servicing, maintaining, repairing, installing, and surveying NAVCom / SATCom / Bridge Navigation, VSAT, GMDSS and more.
HSB Technical’s client is a very established and well-regarded business entity.
Duties and responsibilities of the Electrical Service Engineer (SAT/NAVCom):
Visit vessels to either conduct, work on, repair, or install:
VDR-APTs
Radio Surveys
Installation, repair, and maintenance of GMDSS Equipment
Installation, repair, and maintenance of Navigation equipment
Installation, repair, and maintenance of VSAT Satellite Broadband
Working on Retrofit projects, completing whole bridge installs and large system integrations
Qualifications and requirements for the Electrical Service Engineer (SAT/NAVCom):
Good standard at a higher level HNC/ONC/NVQ Level or equivalent national standard education
Current Driving Licence
Able to pass marine/offshore worker medical examination
Valid Passport as international travel will be part of this role
3+ Years of Marine Service Engineer experience
In-depth knowledge of electronic/electrical engineering
GMDSS Radio Operator / Maintainer License preferred
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.....Read more...
Lead / Snr AV Installation Engineer - I have a new position for a leading AV Integrator London that specialise in the world of high end residential AV Installation. They are now looking for a true master in the fine art of custom av installation. You will need to have a min of 4 years experience in this specific AV market. The role will see you working on projects in London. The clients offer a good career and relevant AV training to further develop your skills and knowledge. As a lead engineer you will be expected to be a figure on site that can take control of other engineers and trades to make sure the project is delivered on time and on budget. You will have previous experience of the installation / configuration of Crestron and Lutron Lighting control systems. If you have the skills and experiences that fulfil the above then please send me your full CV asap.
AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEO BESPOKE CUSTOM INSTALL RACK BUILD CRESTRON DM NVX LUTRON CEDIA AUTOMATION RESIDENTIAL BESPOKE MDUs PROGRAMMING CONFIGURATION HOME NETWORK LONDON SURREY KENT....Read more...
An opportunity has arisen for a Domestic Gas Engineer to join a well-regarded family-run company providing installation, servicing, and repairs for boilers and central heating systems, covering both domestic and commercial clients.
As a Domestic Gas Engineer, you will be responsible for carrying out domestic gas boiler installations, servicing, and heating system repairs to a high standard.
This full-time role offers a salary range of £45,000 - £50,000 and benefits.
You Will Be Responsible For:
? Servicing, repairing, and maintaining domestic gas boilers and central heating systems
? Diagnosing faults and carrying out effective repairs
? Undertaking minor plumbing works when required
? Ensuring work is completed in line with industry regulations and best practice
? Managing daily workloads using a digital job management system
? Attending occasional manufacturer-led training to maintain technical knowledge
What We Are Looking For:
? Previously worked as a Gas Engineer, Domestic Gas Engineer, Heating Engineer, Boiler Engineer, Gas Service Engineer, Boiler Service Engineer, Service Engineer, Installation Engineer or in a similar role.
? Proven experience in domestic gas work, including servicing and breakdowns
? Gas Safe registration
? Ability to work independently while maintaining high professional standards
? Willingness to develop skills in renewable energy or air conditioning
? Full UK driving licence
What's on Offer:
? Competitive salary
? Modern, fully equipped company van
? Company tablet for efficient job management
? Uniform and fuel card provided
? 28 days paid holiday (including bank holidays)
? Pension scheme
? Opportunities for overtime
? Supportive working environment with a close-knit team
? Ongoing manufacturer and additional skills training
This is an excellent opportunity to join a respected and forward-thinking business within the domestic heating sector.
Important Information: We endeavour....Read more...
Are you a skilled engineer looking to make a significant impact in the pharmaceutical industry? We are recruiting a Refrigeration Engineer to join a leading Pharmaceutical company in the Hertfordshire area. As the Refrigeration Engineer, you will play a crucial role in ensuring the optimal performance and reliability of refrigeration systems critical to pharmaceutical operations.
Please note you must have a UK Driving Licence and Right to work in the UK.
KEY DUTIES AND RESPONSIBILITIES:
Your duties as the Pharmaceutical Refrigeration Engineer will be varied however the key duties and responsibilities are as follows:
1. As the Refrigeration Engineer, you will maintain, troubleshoot, and repair pharmaceutical refrigeration systems to ensure they meet industry standards and regulatory requirements.
2. As the Refrigeration Engineer, you will conduct routine inspections and preventative maintenance to maximise system efficiency and minimise downtime.
3. As the Refrigeration Engineer, you will collaborate with cross-functional teams to support the installation and commissioning of new refrigeration equipment.
4. As the Refrigeration Engineer, you will keep detailed records of maintenance activities and provide technical reports to management.
ROLE REQUIREMENTS:
To be successful in your application to this exciting role as the Pharmaceutical Refrigeration Engineer we are looking to identify the following on your profile and past history:
1. Relevant degree in a related engineering field.
2. Proven industry experience in refrigeration engineering, preferably within the pharmaceutical sector. You must have an F Gas accreditation.
3. A working knowledge and practical experience with F Gas regulations and certification.
Key Words: Pharmaceutical / Refrigeration Engineer / Hertfordshire / F Gas Certificate / Maintenance / Troubleshooting / Preventative Maintenance / Installation / Commissioning / Technical Reports / Engineering / F Gas / F-Gas / Ammonia
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the Life Science sectors, combining recruitment expertise with scientific knowledge to help you advance your career.....Read more...
Lead AV Installation Engineer / Lutron Programmer - I have a new position for a leading light in London that specialise in the world of high end residential AV Installation. They are now looking for a true master in the fine art of custom av installation. You will need to have a min of 4 years experience in this specific AV market. The role will see you working on projects in London and the surrounding home counties. The clients offer a good career and relevant AV training to further develop your skills and knowledge. As a lead engineer you will be expected to be a figure on site that can take control of other engineers and trades to make sure the project is delivered on time and on budget. You will have previous experience of the installation / configuration / commissioning of Crestron or Control4 or Savant AV control systems. If you have the skills and experiences that fulfil the above then please send me your full CV asap.
AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEO CRESTRON DM NVX LUTRON CONTROL4 CEDIA SAVANT AUTOMATION RESIDENTIAL BESPOKE MDUs PROGRAMMING CONFIGURATION HOME NETWORK LONDON SURREY KENT SUSSEX....Read more...
Installation Engineer required to join an existing installations team who focus on Access Controls Systems, CCTV and Intruder Detection systems.
You will have a methodical approach to installation ensuring positive outcomes every time
Skills
Computer and IP networking literate.
Security installation experience of CCTV, intruder systems, access control, fire and safety systems, emergency lighting, automated gates, barriers and other ever evolving prevention and detection technologies.
Installation Engineer required to join an existing installations team who focus on Access Controls Systems, CCTV and Intruder Detection systems.
You will have a methodical approach to installation ensuring positive outcomes every time
Skills
Computer and IP networking literate.
Security installation experience of CCTV, intruder systems, access control, fire and safety systems, emergency lighting, automated gates, barriers and other ever evolving prevention and detection technologies.
Duties will include:
Assist in carrying out the installation of Arjo equipment, including ceiling hoists and bath installations in accordance with company and installation procedures, whilst seeking to optimise use of time and minimise associated costs
Become fully conversant with products and health and safety requirements ensuring work on customer's premises is done in a professional and safe manner
Complete and submit all relevant documentation accurately and within agreed timescales
On arrival at customer's premises, to inform staff of reason for visit and request permission before carrying out required work
Upon completion of required work, to ensure work area is clean and tidy, disposal of parts and chemicals is in line with site instructions and relevant documentation is fully completed, correctly authorised and required copies left with authorising employee
Feedback any recommendations to Arjo following visits to customers premises, and on an ongoing basis to contribute ideas and observations in a professional manner, that may support ongoing improvement in Arjo products and services
Ensure personal appearance and levels of hygiene and health are of an exemplary standard in keeping with the company’s market area and ethos
Maintain all tools, spares and equipment within his/her care in a safe working condition highlighting anything unsafe to the Installation Supervisor immediately
Any losses, breakages or excess wear and tear should be reported to the Installation Supervisor to authorise Engineer to obtain replacements
Liaise with Arjo Installations Co-ordinator to advise intended appointment times
Highlight to line manager any shortcomings, malpractice or dishonesty contrary to company policies and procedures discovered in the course of carrying out duties
When required, assist in carrying out service, repairs, or retro fits to equipment on-serivce contract in accordance with Arjo Service procedures or technical advice notices
A driving license is essential, a company van and tools are provided. Some overnight stays and long days are expected.
There is excellent progression on completion of the apprenticeship to installation engineer with over time, paid travel time and very competitive salary.
Regional role covering the south west of the UK, ideal location home base would be Bath and surrounding areas.
Will be working alongside an installation engineer who will provide training and development alongside attending Bath College.Training:
Building services engineering service and maintenance engineerLevel 3 Apprenticeship Standard
The Apprentice will need to attend college one day per week, term time only at our Somer Valley Campus in Radstock
Training Outcome:
On the successful completion of the apprenticeship there will be the opportunity to gain a Permanent role as Installation Engineer
Employer Description:Arjo is a global medical technology company founded in 1957 by Arne Johansson in Eslöv, Sweden, with its headquarters now located in Malmö, Sweden. The company employs approximately 6,800 people worldwide
Arjo specialises in solutions that improve the mobility and well-being of people with reduced functional capacity. Their offerings include:
• Patient handling and transfer equipment
• Hygiene systems
• Medical beds
• Pressure injury and DVT prevention
• Disinfection and diagnostics solutions
• Training and support services
Their mission is encapsulated in the phrase “Empowering Movement”, aiming to enhance both clinical and financial outcomes by promoting mobility in healthcare environments .Working Hours :Monday - Thursday, 8.00am - 4.30pm and Friday 8.00am - 3.30pmSkills: Communication skills,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Duties will include:
Assist in carrying out the installation of Arjo equipment, including ceiling hoists and bath installations in accordance with company and installation procedures, whilst seeking to optimise use of time and minimise associated costs
Become fully conversant with products and health and safety requirements ensuring work on customer's premises is done in a professional and safe manner
Complete and submit all relevant documentation accurately and within agreed timescales
On arrival at customer's premises, to inform staff of reason for visit and request permission before carrying out required work
Upon completion of required work, to ensure work area is clean and tidy, disposal of parts and chemicals is in line with site instructions and relevant documentation is fully completed, correctly authorised and required copies left with authorising employee
Feedback any recommendations to Arjo following visits to customers premises, and on an ongoing basis to contribute ideas and observations in a professional manner, that may support ongoing improvement in Arjo products and services
Ensure personal appearance and levels of hygiene and health are of an exemplary standard in keeping with the company’s market area and ethos
Maintain all tools, spares and equipment within their care in a safe working condition highlighting anything unsafe to the Installation Supervisor immediately
Any losses, breakages or excess wear and tear should be reported to the Installation Supervisor to authorise Engineer to obtain replacements
Liaise with Arjo Installations Co-ordinator to advise intended appointment times
Highlight to line manager any shortcomings, malpractice or dishonesty contrary to company policies and procedures discovered in the course of carrying out duties
When required, assist in carrying out service, repairs, or retro fits to equipment on-serivce contract in accordance with Arjo Service procedures or technical advice notices
A driving license is essential, a company van and tools are provided. Some overnight stays and long days are expected.
There is excellent progression on completion of the apprenticeship to installation engineer with over time, paid travel time and very competitive salary.
Regional role covering the south west of the UK, ideal location home base would be Bath and surrounding areas.
Will be working alongside an installation engineer who will provide training and development alongside attending Bath College.Training:
Building services engineering service and maintenance engineerLevel 3 Apprenticeship Standard
The Apprentice will need to attend college one day per week, term time only at our Somer Valley Campus in Radstock
Training Outcome:
On the successful completion of the apprenticeship there could be the opportunity for the right candidate to move into a permanent role as Installation Engineer
Employer Description:Arjo is a global medical technology company founded in 1957 by Arne Johansson in Eslöv, Sweden, with its headquarters now located in Malmö, Sweden. The company employs approximately 6,800 people worldwide
Arjo specialises in solutions that improve the mobility and well-being of people with reduced functional capacity. Their offerings include:
• Patient handling and transfer equipment
• Hygiene systems
• Medical beds
• Pressure injury and DVT prevention
• Disinfection and diagnostics solutions
• Training and support services
Their mission is encapsulated in the phrase “Empowering Movement”, aiming to enhance both clinical and financial outcomes by promoting mobility in healthcare environments .Working Hours :Monday - Thursday, 8.00am - 4.30pm and Friday 8.00am - 3.30pmSkills: Communication skills,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Snr AV Installation Engineer – This new position in has arrived due to my client’s present projects and a full order book. This role requires you to have between 3-5 years of experience from within the custom installation marketplace. You will be working on bespoke AV projects being delivered to high end residential clients. The projects are in and around the Nottinghamshire area so this means your geographic location must be local. You will be a client facing engineer that can take charge on site and manage the more Jnr engineers within your team. You will be a WHIZZ with paperwork and have no issues with wiring diagrams, installation schematics and rack build drawings. Your hands on skills regarding both 1st fix and 2nd fix need to exemplary, It would 100% ideal that you have skills with the commissioning, configuration and basic programming of Crestron Home, Control4 and Lutron, so please make this clear within your CV. If you have these skills, then please send a full technical CV asap.
AV A-V A/V AUDIOVIUSAL AUDIO-VISUAL AUDIO/VISUAL LIGHTING CI CEDIA CUSTOM INSTALLATION INTEGRATION CEDIA SMARTHOME AUTOMATION CONTROL RACK CRESTRON CONTROL4 LUTRON PROGRAMM COMMISSION NOTTS LEICS NORTHANTS NOTTINGHAMSHIRE, NORTHAMPTONSHIRE LEICESTERSHIRE
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV....Read more...
An exciting opportunity has arisen for a Field Service Engineer, based in the South East of England to work for a company delivering industry leading IoT solutions.
The Field Service Engineer, based in South East England, will report into the Technical Operations Manager and will be required to operate with a high degree of autonomy whilst working against pre-defined work schedules.
Key Responsibilities and Accountabilities
Installation and corrective maintenance of all company Leisure products on customer sites in accordance with agreed service level agreements.
Develop strong relationships with key personnel at customer sites (Owners / General Managers / Sales Managers / Administrators / Security Teams).
Proactively manage weekly schedules ensuring that customers are delivered the optimum service.
Identification, survey installation and maintenance of infra-structure on new and existing customer sites.
Provide national emergency breakdown cover.
The Field Service Engineer, in South East UK will be willing and able to undertake extensive travel within the UK, therefore a current driving license that is valid in the UK is essential.
APPLY NOW for the Field Service Engineer Job opportunity based in South East England by sending your CV to rdent@redlinegroup.Com.....Read more...
Field Service Engineer Corby £33,000 - £35,000 Basic + Overtime (OTE £45,000+) + Company Van/Allowance + 25 Days Holiday + Pension + Healthcare + Immediate Start
Are you a Field Service Engineer with strong mechanical and electrical maintenance skills and enjoy variety in your work? Are you looking for a role that gives you the opportunity to travel across the UK and abroad while working on cutting-edge material handling systems? If so, this is a fantastic opportunity to join a global market leader in conveyors and automation.
This is a great chance to be part of a growing service division as a Field Service Engineer where your technical skills and problem-solving ability will make a real impact. You’ll gain exposure to high-profile clients in logistics, e-commerce, retail and manufacturing, while enjoying excellent training and long-term career prospects.
Your Job As A Field Service Engineer Will Include:
* Installing, servicing and maintaining conveyors and material handling equipment * Carrying out preventative maintenance and breakdown repairs * Training customers and technicians on safe use and maintenance * Producing service reports and ensuring compliance with H&S standards * Supervising installation projects when required
As A Field Service Engineer You Will Have:
* NVQ/Apprenticeship or time served in mechanical/electrical engineering * Hands-on experience in service, maintenance and installations * Good communication skills and confident working with customers * Flexible approach to travel and overnight stays 1 week out of 4 * Full UK Driving Licence
Apply now or call Billy on 07458 163030 for immediate consideration!
Keywords: field service engineer, mechanical maintenance, electrical maintenance, conveyor systems, installation engineer, breakdown repairs, preventative maintenance, PPM, material handling, automation, distribution centres, e-commerce, retail, manufacturing, telescopic conveyors, powered conveyors, flexible conveyors, international travel, UK travel, NVQ mechanical engineering, NVQ electrical engineering, customer training, fault finding, technical service engineer, service and maintenance, installation projects, maintenance engineer
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
....Read more...
Position: Marine Engineer
Job ID: 3198/1
Location: IOW
Rate/Salary: Dependant on experience
Type: Perm
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
We are looking for a Marine Engineer to join a marine engineering business specialising in leisure boating. Our services include installation, servicing, and repairs of engines, along with electrical and plumbing work.
Our expertise covers inboards and outboards, diesel and petrol technology, and everything from small RIBs and auxiliary engines to large sailing and motor yachts.
As a Marine Engineer you will need to be confident and experienced in handling a wide range of tasks in these areas.
Duties and responsibilities of the Marine Engineer:
• Installation of a variety of mechanical and domestic equipment on both new and used boats
• Performing routine servicing according to manufacturer specifications or customer instructions, Conducting diagnostics and troubleshooting issues
• Responding to call-outs and providing both immediate and long-term solutions for clients
• Travel to attend boats locally and across the island
Qualifications and requirement for the Marine Engineer:
• Trained in the marine leisure industry is preferred but not mandatory
• Worked leading brands such as Volvo Penta, Honda Marine, Mercury, and Mercruiser
• Must Hold a full UK Drivers license
This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.....Read more...
Assisting the Directors and Managers with administration function associated with installation works
Answering phones and greeting visitors
Liaising with customers and suppliers, via email, telephone, and letter
Check & maintain stock levels of consumables & equipment, including cable
Dealing with all company vehicles, booking in services, MOT’s, and repairs
Maintain and update spreadsheet records for Managing Director
Log service, maintenance and installation jobs on Uptick and allocate to relevant engineer
Maintain and update engineer schedule with full details of jobs, including Uptick job number, customer PO and amounts
Create job files for site staff and include all relevant information for the project
O&M Manuals to download, compile and send
Receiving all deliveries and allocating space in stores, completing delivery on sage and email Installation Manager to advise of location
Training:Business Administrator Level 3.Training Outcome:This apprenticeship offers a range of progression opportunities upon completion. Learners may choose to progress within the company, receiving pay rises or promotions over time, or they may choose to move onto a higher level apprenticeship, such as a level 4 or 5.Employer Description:AEL Systems are a well established security system installation business, they work with businesses across the northeast to deliver CCTV and installation services.Working Hours :Full-time Monday to Friday, exact working hours TBC.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Initiative....Read more...
Lead AV Installation Engineer / Lutron Programmer - I have a new position for a leading light in London that specialise in the world of high end residential AV Installation. They are now looking for a true master in the fine art of custom av installation. You will need to have a min of 4 years experience in this specific AV market. The role will see you working on projects in London and the surrounding home counties. The clients offer a good career and relevant AV training to further develop your skills and knowledge. As a lead engineer you will be expected to be a figure on site that can take control of other engineers and trades to make sure the project is delivered on time and on budget. You will have previous experience of the installation / configuration / commissioning of Crestron or Control4 or Savant AV control systems. If you have the skills and experiences that fulfil the above then please send me your full CV asap.
AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEO CRESTRON DM NVX LUTRON CONTROL4 CEDIA SAVANT AUTOMATION RESIDENTIAL BESPOKE MDUs PROGRAMMING CONFIGURATION HOME NETWORK LONDON ....Read more...
An opportunity has arisen for a Domestic Gas Engineer to join a well-regarded family-run company providing installation, servicing, and repairs for boilers and central heating systems, covering both domestic and commercial clients.
As a Domestic Gas Engineer, you will be responsible for carrying out domestic gas boiler installations, servicing, and heating system repairs to a high standard.
This full-time role offers a salary range of £45,000 - £50,000 and benefits.
You Will Be Responsible For:
* Servicing, repairing, and maintaining domestic gas boilers and central heating systems
* Diagnosing faults and carrying out effective repairs
* Undertaking minor plumbing works when required
* Ensuring work is completed in line with industry regulations and best practice
* Managing daily workloads using a digital job management system
* Attending occasional manufacturer-led training to maintain technical knowledge
What We Are Looking For:
* Previously worked as a Gas Engineer, Domestic Gas Engineer, Heating Engineer, Boiler Engineer, Gas Service Engineer, Boiler Service Engineer, Service Engineer, Installation Engineer or in a similar role.
* Proven experience in domestic gas work, including servicing and breakdowns
* Gas Safe registration
* Ability to work independently while maintaining high professional standards
* Willingness to develop skills in renewable energy or air conditioning
* Full UK driving licence
What's on Offer:
* Competitive salary
* Modern, fully equipped company van
* Company tablet for efficient job management
* Uniform and fuel card provided
* 28 days paid holiday (including bank holidays)
* Pension scheme
* Opportunities for overtime
* Supportive working environment with a close-knit team
* Ongoing manufacturer and additional skills training
This is an excellent opportunity to join a respected and forward-thinking business within the domestic heating sector.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
You will be working on all aspects of networking including WiFi, VOIP, CCTV and switching covering:
Support of customer deployments - mainly office based using remote access to troubleshoot issues, monitor performance and manage change requests, documenting changes
Surveying new opportunities - at the end customer site using advanced tools to gather customer requirements and drafting proposed solutions
Installation - involves configuration of equipment in the office prior to installation at the customer's site. Installation includes:
Preparation for an installation: checking materials and tools are ready and correct for the install, loading vehicles
Complying with site health and safety requirements, handling tools and materials, using of ladders and MEWP’s
Installing: data cabling, terminating & testing, equipment and verifying correct operational
Post installation: performing post installation surveys, checking tools and test equipment are correct before leaving site, loading vehicles, recycling waste materials, documenting the installation
Training:Comprehensive digital introductory modules including technical concepts and personal/professional development.
Level 4 Network Engineer apprenticeship standard
e-learning training materials
Specialist CompTIA vendor qualifications
Virtual classroom training on the CompTIA vendor qualifications
Access to uCertify training platform; core learning materials, assessments, and practical hands-on-labs
Monthly assessor visits and competency checks
9 am - 5 pm support desk for technical support
Training Outcome:This is a great opportunity for you to develop skills that will enhance your networking career. On passing your Primary Goal apprenticeship, you will gain professional recognition for the Register of IT Technician (RITTech).
We also offer a progressive step in some cases, onto our Level 4 Network Engineer apprenticeship programme.Employer Description:Daconi are a systems integrator that leverage wireless technology to provide real time control systems for demanding applications and stand alone solutions from indoor WiFi to outdoor symmetrical Multi-Gigabit point-to-point links. Daconi provide cost effective solutions to educational, enterprise, industrial and agricultural sectors.Working Hours :Full-time, 37.5 hours per week. exact working days and hours TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Patience....Read more...
Trainee Engineer Harrogate – £13-£15 per hour (£40,00 OTE) + Overtime + Company Pension + Family Run + Full Training + All Expenses Covered
Do you enjoy working with your hands and using tools to build things? Are you looking for a role where you’ll receive full training, develop valuable engineering skills, and be part of a supportive team? This Trainee Engineer position offers the chance to join a long-established, family-run business in North Yorkshire that manufactures and installs specialist laboratory equipment across the UK.
As a Trainee Engineer, you’ll gain hands-on experience from day one, working on everything from workshop assembly to on-site installations, with occasional travel and overnight stays. In return, you’ll enjoy a varied role, ongoing development, and the opportunity to build a long-term career with a company that values and invests in its people.
Your Role Will Include:
Using hand tools and power tools to carry out assembly tasks (nuts, bolts, screwing, drilling)
Troubleshooting and resolving issues during the manufacturing process
Travelling to client sites across the UK for equipment installation (overnight stays)
What You’ll Need:
Hand tools and power tools experience
Mechanical aptitude and problem-solving ability
Good attention to detail and ability to follow instructions
A full UK Driving Licence (required)
Trainee Assembly Technician, Trainee Mechanical Assembler, Mechanical Assembly, Workshop Assembly, Equipment Assembly, Mechanical Fitter, Trainee Engineer, Use of hand and power tools, Reading technical drawings, Mechanical knowledge, Product Assembly, Assembly Operative, On-site installation, manufacturing, Engineering training provided, Supportive assembly team, trainee jobs, North Yorkshire assembly jobs....Read more...
Sales Engineer required to sell electrical installation systems offering tailored, innovative solutions providing technical expertise, and a proactive, results-driven approach.
You will take ownership of fostering customer relationships, driving sales strategy, and delivering tailored solutions. Developing and maintaining strong relationships with clients in both the residential and commercial sectors, identifying new business opportunities, and providing technical support to help customers select the best solutions for their needs.
Experience
Degree in Electrical Engineering or related field.
Sales Experience, a proven track record in sales within the electrical industry, with a track record of meeting or exceed sales targets.
Electrical installation systems and product knowledge.
Responsibilities
Client Relationship Management
Business Development
Provide technical guidance and support to clients, helping them choose the best solutions from our range of electrical installation products.....Read more...
Install fire rated cabling
Wire up detection devices
Use hand and power tools
Design fire systems as per regulations
Training:Fire Emergency and Security Systems Technician Level 3.Training Outcome:
Installation engineer
Service engineer
Commissioning engineer
Employer Description:BAFE accredited professional fire companyWorking Hours :8am - 4pm, Monday to FridaySkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
An opportunity has arisen for a qualified Electrician to join a well-regarded provider of sustainable heating solutions specialising in delivering innovative low-carbon systems to domestic properties, supporting the transition to greener energy.
As an Electrician, you will be working on domestic electrical systems, supporting the installation of renewable technologies such as air source heat pumps and solar systems.
This full-time permanent role offers a salary up to £45,000 and benefits.
You will be responsible for:? Installing and integrating electrical systems for technologies such as solar PV, battery storage, EV charging and air source heat pumps
? Carrying out inspection, testing and certification of completed works
? Reading and updating job schedules via internal systems and completing all project-related documentation
? Liaising with end users where necessary to provide guidance and ensure satisfaction
? Ensuring compliance with relevant health & safety, environmental and electrical regulations
What we are looking for:
? Previously worked as an Electrician, Electrical Technician, Electrical Engineer, Maintenance Engineer, Electrical Installer, Service Engineer or in a similar role.
? Possess 1+ years experience.
? Experience with system controls.
? Must hold a minimum of the 18th Edition qualification.
? Competent and certified domestic electrician with strong installation experience.
? Background working in residential environments with a focus on quality and safety.
? Experience with renewable technologies such as air source heat pumps, solar PV systems, or battery storage would be preferred.
? Strong problem-solving approach with sound technical understanding.
? Full UK driving licence with willingness to travel to sites across London and nearby regions.
? Must have own hand tools (specialist equipment provided where required).
What's on offer:
? Competitive salary
? Company van and fuel ca....Read more...
