Assist in designing substations operating at voltages up to 132,000 volts
Develop layouts and configurations for physical substation components (e.g., transformers, switchgear, busbars)
Create detailed project-specific designs, drawings, and specifications
Prepare schedules and bills of materials for equipment and installation
Ensure compliance with operational standards and safety regulations
Work closely with senior engineers and project teams to ensure designs meet client and regulatory requirements
Training:The training programme provides on-the-job training and formal courses held in one of our Training Centre’s at either Taunton or Tipton, over a period of approximately two years (depending on entry level qualifications). Successful candidates will also be expected to study for and achieve a higher-level qualification. The majority of the on-the-job training will take place within local teams, but you may be required to undertake placements at other locations across the National Grid service area, so you need to be flexible and able to travel. You will progress towards the role of an engineer within Engineering Design and the apprenticeship programme takes around five years to complete. You’ll spend your first 10 - 12 weeks being inducted onto the programme at one of our Training Centres. You’ll earn while you learn and develop your knowledge, skills and behaviours to become an Electrical Designer, achieving a higher-level qualification (if not already achieved). Your Training will include vocational and academic courses along with placements across our service areas. During these placements you will undertake managed office or field-based training with a team where you can put your new skills into practice.
As you will be studying for a higher-level qualification, you will be required to undertake placements at your training provider for up to two weeks at a time during the first two years. Accommodation and travel costs will be provided. Training Outcome:
You’ll become a qualified Network Planning & Design Engineer
Employer Description:We’re National Grid Electricity Distribution (NGED), the owner and operator behind the electricity distribution systems for the Midlands, the Southwest of England and South Wales. Serving communities of more than 8 million people, our expert teams deliver heat, light and power for homes and businesses, working outdoors with underground cables, overhead lines and substations that operate between 230 and 132,000 volts. Net-zero targets are transforming the way we work and increasing the scope of the positive impact we can make. Right now, we’re looking for apprentices to join us. Our people in Network Services work across a number of teams to keep the lights on for our customers. They might be helping a customer who has lost supply or supporting a developer building a multi-million pound project. They maintain a 24/7 service from faults and maintenance, asset replacement to new connections, working outdoors with underground cables, overhead lines and substations that operate between 230 and 132,000 volts, their work is critical to everything we do. Working Hours :Monday to Friday, 9.00am - 5:30pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Adventurous,Safety awareness,Resilient....Read more...
Multi Skilled Maintenance Engineer (Electrically Biased) Shifts: Continental Shifts – 12 Hour Days & Nights
Our client is a leading FMCG / Manufacturing business and they are looking for an electrically biased Multi Skilled Maintenance Engineer to support production performance and keep machinery running reliably across the site.
What you’ll be doing:
Carrying out planned and reactive maintenance on production machinery
Electrical fault finding on motors, sensors, control panels and automation equipment
Supporting mechanical repairs when needed
Working closely with production teams to minimise downtime
Completing inspections, maintenance logs and all relevant documentation
Assisting with installation and commissioning of new machinery
Identifying improvements to boost reliability and efficiency
What you’ll need:
Electrically biased Maintenance Engineer background
Experience within manufacturing (FMCG preferred but not essential)
Strong electrical fault-finding skills and safe working practices
Ability to read electrical drawings and schematics
Mechanical ability to support wider engineering tasks
Level 3 NVQ / City & Guilds / HNC/HND in Engineering (or equivalent)
Apprenticeship-trained (desirable)
Nice to have:
PLC fault-finding experience
Industry certifications
Forklift licence
Benefits:
Monthly product allowance
Private medical & 24/7 GP access
Life assurance
Enhanced pension
Generous holiday entitlement
High street discounts
Company bonus scheme
If this isn’t quite right for you, Synergi Search & Select support a wide range of manufacturing businesses across the UK. Get in touch for a confidential chat about alternative opportunities.....Read more...
Mission of the role:
To work safely in compliance with site rules and HSE legislation.
The apprentice will work as part of the Maintenance team, working towards becoming a multi-skilled technician, including mechanical, electrical and controls.
The apprentice will learn the fundamental knowledge required to safety perform maintenance on all assets on site. The hands-on experience will complement the course content to ensure the apprentice gains experience of all theoretical principles studied.
The role of a Maintenance Technician is to provide a maintenance service to all departments on site providing diagnostic skills, initiating improvements and undertaking preventative maintenance, ensuring that all assets and services are maintained to a standard in keeping with business targets and needs.
Responsibilities:
· Taking a proactive approach to Environment, Health and Safety
· Working under the sites Permit To Work, Lock Out Tag Out and Risk Assessment systems, when trained to do so.
· Working within a highly regulated, upper-tier COMAH site.
Only under direct supervision by a competent Technician:
· Maintaining equipment and working within a fast-paced environment.
· Maintaining and fault finding.
· Predictive/reactive maintenance of site assets, mechanical and electrical.
· To undertake site service electrical/mechanical maintenance and installation duties as scheduled.
· To accurately complete job records on our Maintenance Management System
· To identify and implement continuous improvements projects.
· Where applicable, to assist with projects including conception of ideas, installation and commissioning, monitoring and maintaining.
· To be aware of machine efficiencies to ensure that they are performing at optimum levels.
· Is prepared to undertake training in a positive manner both for self-development and for the provision of departmental cover
· Encourages and develops a team culture both within own team and across the company
· Achievement of effective communication both within own team and between teams
· Any other duties in keeping with the post at the direction of your manager.Training:Level 3 Mechatronics Maintenance Technician. You will complete block release at Alliance Learning completing three days a week in your first year, one day a week in your second year and on-site delivery in your third year, to gain the vital skills, knowledge and behaviours.Training Outcome:Could pursue a career as a STAX EngineerEmployer Description:STAX Converting is a trusted UK-based company specialising in the conversion of large and small parent reels and sheets. Our facilities in Wigan and Bolton are operated by a skilled team dedicated to ensuring your business gets the quality paper it needs – whether it’s for palletising, industrial wrapping, packaging or void fill.
Since 2009, we’ve built a reputation for delivering reliable, high-quality service with a personal touch. As an expert B2B supplier, we pride ourselves on flexibility, fast turnaround times and environmentally responsible practices. We often produce paper products made from recycled fibre, and FSC-certified products are available by request.
Whether you’re a large manufacturer or an independent business, we’re here to provide the paper solutions you need — efficiently, sustainably, and exactly to spec.Working Hours :Monday – Friday 8am – 4:30pm please confirmSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative,Strong team work ethic,Flexible attitude to work,Can-do, hands-on attitude,Ability to learn new skills....Read more...
Finishing/Service Engineer CO Home Improvements Competitive Salary + Van Full time Benefits:Commission Structure | 25 days Holiday + Bank Hols | Health cash plan | Pension Scheme | Personal development programmes through courses and training | Free parking About us:CO Home Improvements are a group of six retail brands operating across the North of England and Cumbria, forming part of the £60 million turnover Conservatory Outlet Group. As established leaders in the design and installation of conservatories, orangeries, windows, doors, and modern living spaces, we’re committed to transforming homes with innovative, high-quality products that combine striking design with everyday functionality. Our approach is rooted in delivering exceptional customer service.Our employees are the heart of the business, and we invest in great people by offering ongoing career development and training opportunities. If you’re passionate about making a difference and want to be part of a team that values your ideas and hard work, we’d love to hear from you. About the Role:
To be responsible for resolving manufacturing or fitting issues with our windows, doors, bi-folds, warm roofs and conservatory roofsSmall amount of joinery work (skirting and laminate)To provide excellent Customer Service whilst at customers propertiesTo be responsible for ensuring quality work is carried out at all timesTo support Customer Services to assist with resolving production issues as and when required
What we are looking for:
Previous experience in all aspects of warm roofs, conservatories, window, door and bi-fold manufacturing including fitting doors and windowsPrevious joinery experience in fitting skirting and laminate flooringThe ability to fit any miscellaneous hardware or fittings that may be required such as handles, hinges, glazing, letterboxes etcThe ability to measure sizes accurately with the relevant measuring toolsExcellent product knowledge
If the above sounds like you, we would like to hear from you!How to apply:Ready to start your career with us? Apply with your updated CV. INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
Key Deliverables and Accountabilities of a Technician Engineer
To be an active & contributory member during their periods in the design/work winning & operation teams.
To understand and deliver the client's requirements and liaise with designers/client/ main contractors to optimise the best engineering solution.
Ensure the appropriate selection of piling technique is chosen to suit the project ground conditions.
To undertake geotechnical analysis/design using in-house and commercially available software in accordance with the relevant codes of practice and prepare detailed geotechnical design reports for submittal to clients and respond to technical queries raised during the approval process.
To cost, budget, tender, negotiate and secure orders for a variety of such systems, whilst maximising the business profits.
Preparation of settlement packs for review by the business at settlement meetings.
Preparation of contract design documents, drawings and schedules.
To design with awareness of risk including, H&S, geotechnical and commercial aspects.
To liaise and provide design support to the operation team during the installation phase to ensure correct design is fully implemented.
To produce as built documentation post construction.
Develop long lasting relationships with clients to encourage repeat business.
Co-ordinating and responding to client's requests by gaining experience from colleagues.
Collaborative working with other LOR business units to achieve shared end goals.
Training:The training schedule has not yet been agreed.Training Outcome:This apprenticeship starts at Level 4 Civil Engering Technician Apprenticeship then moves onto a Level 6 Civil Engineering Apprenticeship.
On completion of both apprenticeships, you will remain in the business, gaining more responsibility. Employer Description:Our Technical Apprenticeship programme is developed for individuals with a passion for construction and engineering. It combines college and work-based training, allowing you to build your skills and gain a recognised qualification while working on some of the most exciting projects in the UK.Working Hours :Monday - Friday, 8.00am - 5.00pm. As a project-led business, the location of our work can vary depending on project needs. This role may require you to be prepared to work away from home at project sites across the UK.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working....Read more...
Position: Assistant Electrical Superintendent (Shore Based)
Job ID: 1873/1
Location: Liverpool (with travel to Belfast)
Salary: £40,000–£45,000 DOE
Type: Permanent
Benefits: 25+ days holiday, private health insurance (including spouse and children under 18, accepting all pre-existing conditions, taxed), 8% employer pension contribution & 8% employee contribution, vehicle provided for business use.
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy, and Subsea sectors – visit: (url removed) for a full list of our vacancies.
Position Overview
The Vessel Electrical Engineer (shore-based) will focus on surveys, fault finding, repairs, and installation of vessel electrical systems across operational vessels, from engine room to bridge. You will be the go-to technical expert for electrical works, ensuring operational vessels remain safe, compliant, and fully functional.
Key Duties & Responsibilities
• Conduct electrical surveys on vessels, including dockings, overhauls, and routine inspections.
• Fault-find, repair, and install vessel electrical systems, covering:
• Engine Controls (Deep Sea, Comap, and various other systems)
• Power Management Systems (PMS)
• Bridge systems including navigation, radar, communication, and other electrical equipment.
• Assist with preparation and execution of pre-docking tests and inspections, including reporting and follow-up actions.
• Organise and manage parts and spares for repairs and installations.
• Maintain clear and effective communication with vessel crew and shore-based management.
• Perform preventative maintenance and reactive breakdown response, including occasional weekend/on-call duties.
Qualifications & Requirements
• Ex-Royal Navy or Ex-Merchant Navy – ETO, RFA preferred.
• Minimum 1–3 years’ experience in the marine industry.
• Basic understanding of diesel engines and propulsion system controls & monitoring systems.
• Experience with engine controls and power management systems.
• Competent in fault finding and rectification of electrical and electronic defects.
• Able to carry out electrical work, testing surveys, dockings, overhauls, and other repairs.
• Excellent command of English, both oral and written.
• Fully proficient with computers and applications.
• Full clean UK Driving Licence.
• Flexibility to travel to Belfast and other locations as required.
Working Hours & Environment
• Monday–Friday standard hours (on tugs in Liverpool/Belfast).
• Some reactive weekend work may be required for broken vessels.
• Team size: reporting directly to Technical Superintendent in Liverpool.
• Role involves breakdown response, preventative maintenance, and reactive work across vessels.
Compensation & Benefits
• Salary: £40,000–£45,000 DOE
• Overtime: Any extra hours worked are compensated with time off in lieu.
• 25+ days holiday.
• Private health insurance (includes spouse and children under 18, accepting all pre-existing conditions, taxed).
• Pension: 8% employer, 8% employee.
• Company vehicle provided for business use.
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
IT Support Engineer (1st/2nd Line) CO Manufacturing Competitive Salary + Benefits Mon – Fri, 40 hours a weekBenefits:25 days Holiday + Bank Hols | Health cash plan | Pension Scheme | Monthly Employee value awards up to £75 | Personal development programmes through courses and training | Free parking About us:CO Manufacturing is the manufacturing hub of the £60 million turn over Conservatory Outlet Group, producing high-quality windows, doors, and conservatory roofs for a network of leading home improvement retailers, new build sites and trade businesses across the UK. Based in Wakefield, we combine advanced technology with skilled craftsmanship to deliver exceptional products that help homeowners transform their living spaces.Our success is built on teamwork, innovation, and a commitment to quality at every stage of the process from design and production through to delivery. We’re proud to invest in our people, offering hands-on training, career development, and the opportunity to grow within a business that values hard work and new ideas. About the Role:The role is aimed at someone with at least 1-3 years’ experience in 1st line support who is also ready to learn and take responsibility for more complex troubleshooting and technical tasks. You will be working in a small helpdesk team providing support to both our onsite manufacturing facility and wider sales network.This is a hands-on role based on site. At times you will need to work directly on the factory floor or complete basic physical tasks such as installing hardware or setting up equipment. Occasional travel to other Conservatory Outlet Group companies may also be required. Other key responsibilities include:
Initial point of contact for usersTroubleshooting and resolving common and reoccurring issues under the guidance of the senior support staffEscalate complex and unresolved ticketsSupporting the administration of Windows Server, Active Directory, Group Policy and user permissionsSupporting Microsoft 365 and device management through Intune and Endpoint ManagerHandling installation, upgrades and system maintenance tasksDocumenting fixes and helping build internal knowledge basesAsset Management
What we are looking for:
Experience in a 1st or 2nd line support roleStrong knowledge of general helpdesk support e.g. MS365 user support, installing hardware/software, troubleshooting issuesA basic understanding of networking including routing, switching, VLANs, VPNs and firewallsClear communicator who can explain issues in a straightforward way
How to apply:Ready to start your career with us? Apply with your CV INDLS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
Health & Safety
Support staff training and maintain training records/matrices.
Assist with training arrangements: Asbestos, Working at Height, IPAF, PASMA, First Aid, Confined Space, etc.
Help prepare Construction Phase Plans / RAMS and ensure staff understand and sign them.
Conduct toolbox talks, fire drills, and routine site inspections.
Assist with daily checks on plant, ladders, harnesses, MEWPs, and employee tools (including PAT testing).
Report near misses and accidents; support investigations.
Participate in HSE meetings with senior staff.
Contractors
Issue and maintain HSE questionnaires for contractors; check insurance, qualifications, and RAMS.
Monitor PPE compliance and assist with toolbox talks where required.
PPE & Uniform
Source and issue PPE and uniforms; maintain records and stock.
Authorize engineer PPE requests and ensure proper use and storage.
Quality (ISO 9001)
Support quarterly audits, management meetings, and quality checks.
Assist with updating quality procedures and policies.
Help close actions from audits and reviews.
Environmental (ISO 14001)
Assist in maintaining the environmental policy and compliance.
Help monitor environmental performance, conduct monthly internal audits, and support management reviews.
Fleet
Assist with vehicle registration, fuel cards, inspections, servicing, repairs, trackers, and record maintenance.
Help maintain driving licence and penalty records.
Safety Standards Compliance
Assist in maintaining registrations: Safe Contractor, CHAS, Construction Line, and Building Safety Act compliance.
General & Additional Duties
Support inductions, health questionnaires, and staff welfare.
Assist with PQQs, client documentation, and external safety audits.
Help maintain records for BAFE SP203 compliance, competency audits, and corrective actions.
Skills & Attributes Required:
Good communication, organization, and attention to detail.
Willingness to learn and follow HSEQ procedures.
Proactive approach to safety and quality.
Basic IT skills for record-keeping and reporting.
Training:Training will be workplace-based with remote support from High Ridge Training, delivered via online sessions alongside hands-on practical experience.Training Outcome:Future career prospects offered after completion of the programme – a full-time position in the HSEQ department.Employer Description:EESI team serve customers in and around Gloucestershire, the Southwest, West Midlands, and nationally.
We specialize in electrical and mechanical installations for commercial and industrial buildings, as well as offering a comprehensive facilities management service.
EESI are experts in all things ‘electrical’ – including cabling infrastructure and lighting. We also specialize in the installation and maintenance of heating and HVAC systems, air conditioning, security, fire alarms and CCTV, as well as property and grounds maintenance.Working Hours :Monday to Friday. 8:00am - 4:30pm with 30 mins lunch breakSkills: Problem solving skills,Initiative,Strong attention to detail,Ability to follow procedures,Good communication,Motivated to learn,Reliable and responsible,Carry out safety checks,Safety awareness,Teamwork,Environmental awareness,Organized & proactive,Risk assessment,Interest in SHE practices....Read more...
Are you passionate about delivering exceptional service to customers? We're seeking a skilled an IT Field Service Engineer to join our team in Chesterfield.Your role will be pivotal in ensuring the smooth operation of ICT & AV equipment at client sites through preventative maintenance, repairs, and expert support. The role will predominantly be working with our education partners, so it may be of interest to someone who has a knowledge of working with schools and has an interest in making a difference to the use of technology in education.Benefits of Working with Us:
Annual Leave: We offer 20 days annual leave per year increasing 1 day per year up to a maximum of 25. In addition to this we close the business down over the school Christmas holidays - the team have to hold 3 days of their allowance back but get 2 weeks off fully paid (this normally accounts for an additional 7 -8 days paid holiday)Private Medical Insurance (PMI): It includes mental health wellbeing cover & Gym membership discountsMileage Allowance: Provided for business travelUniform: Provided for employeesFlexible Working: Championing a flexible working approach for all employees
Key Responsibilities:
Collaborate with the service department team to conduct preventative maintenance visits and repairs on ICT & AV equipment at client sitesInstall and monitor classroom equipment, maintaining efficient maintenance schedules, warranty logs, and repair arrangementsEnsure licensing checks are conducted in accordance with service level agreementsProvide advice, support, and handover information to clients and, when necessary, pupils on-siteLiaise with third-party suppliers and provide support for complex client issuesAssist clients and staff with new product demonstrations and training on hardware and softwareCreate backups on-site for clients and manage security measures and protection protocols for internet browsingPerform basic scheduled maintenance on audiovisual equipment and conduct fault finding with peripherals, offering remote 1st and 2nd line supportManage server and network operations both on-site and remotely, including installation of new cabling and decommissioning of redundant equipment and cabling
Skills and Experience:
Proficiency in Windows servers 2012-2022 and strong MS Office skills with knowledge of O365Comfortable using all versions of Windows and experience with Network Security TechnologiesFamiliarity with Hyper V / VM ware, Active Directory, Group Policy Management, DNS Configuration, and DHCP ConfigurationAdditional practical experience with WSUS Management, MDT / WDS capture, and Antivirus knowledge is advantageousKnowledge of routers, switches, iPad Deployment Solutions, and Apple Network Configuration is desirableAbility to diagnose failures, take corrective action, and repair on-site
Attributes:
Self-starter with the ability to drive projects to completion independentlyExcellent interpersonal skills with a strong focus on customer serviceMaintains professional standards of quality of work, personal presentation, and conductCollaborative team player with a customer-focused mindsetFlexible and adaptable to changing priorities and tasks
Join Us:If you're ready to take your career to the next level and be part of a dynamic team committed to excellence, we want to hear from you! Please submit your CV to the link provided & we will be in direct contact.Don't miss this opportunity to make a difference in the field of ICT & AV equipment services!....Read more...
Our client is a global renewable energy company and one of Europe’s largest independent power producers. They develop, build and operate a diversified portfolio of clean-energy assets, including wind, solar, and energy storage to supply reliable, affordable renewable power while minimising environmental impact. They integrate sustainability and community engagement into every project, supporting social, ecological and local-economic value beyond just electricity generation. The Electrical Reliability Engineer is responsible for ensuring the optimal performance, safety, and longevity of electrical infrastructure including Balance of Plant, wind farms and PV installations) across the Italian fleet. This role involves ensuring the reliability, efficiency, and safety of electrical systems, collaborating with multidisciplinary teams, and contributing to various projects from inception through to completion. Responsibilities: Design & Development:Lead or support the design and specification of new or upgraded electrical systems, ensuring reliability and safety compliance.Collaborate with engineering and project teams to integrate reliability principles into new assets and retrofits.Evaluate and recommend technologies that improve electrical performance and reduce lifecycle costs.Contribute to the standardisation of electrical designs and components to streamline maintenance and spare-parts management.Ensure all designs meet applicable Italian and international electrical codes and internal engineering standards.Support the development of technical documentation, including schematics, wiring diagrams, and system specifications. Project Management and Implementation:Manage and oversee electrical projects, ensuring they are completed on time, within budget, and to the required standards.Coordinate with other internal departments, contractors, and stakeholders to ensure successful project execution.Perform site inspections and supervise the installation and testing of electrical systems.Manage contacts and coordinate preventive and reactive maintenance activities with electrical suppliers. Testing and troubleshooting:Conduct tests and inspections to ensure the functionality and safety of electrical systems.Commission electrical systems and troubleshoot any issues that arise during testing.Develop and implement maintenance and testing procedures.Analyse test results to detect anomalies, degradation, or early signs of failure, and recommend corrective actions.Lead troubleshooting efforts for complex electrical issues, coordinating with maintenance teams to ensure timely resolution and minimal operational disruption.Utilize advanced testing tools and techniques such as insulation resistance testing, thermographic imaging, and power quality analysis.Document findings, root causes, and repair actions to support continuous improvement and knowledge sharing across the fleet. Compliance and Documentation:Ensure all electrical systems and maintenance activities comply with relevant Italian and EU regulations, industry standards, and internal policies.Maintain accurate and up-to-date documentation, including inspection reports, test results, maintenance records, and engineering drawings.Support audits and regulatory inspections by providing required technical documentation and evidence of compliance.Develop and update standard operating procedures (SOPs), work instructions, and reliability guidelines to reflect best practices and regulatory changes.Promote a culture of compliance and accountability across the fleet by reinforcing adherence to safety and quality standards.Manage the institutional relationship with the DSOs the TSO (Terna) and the electrical regulator (ARERA). Continuous Improvement:Identify and implement opportunities to enhance the reliability, efficiency, and maintainability of electrical systems across the fleet.Analyse failure data, maintenance trends, and performance metrics to drive data-informed improvements.Lead or participate in cross-functional initiatives aimed at reducing downtime, optimizing maintenance strategies, and extending asset life.Promote a culture of continuous improvement by sharing lessons learned, best practices, and innovative solutions with engineering and maintenance teams.Support the integration of new technologies and digital tools that enhance predictive maintenance and system diagnostics. RequirementsMinimum of 3-5 years of experience in electrical engineering or a related field.Bachelor’s degree in electrical engineering or a related field. A Master’s degree is preferred. Professional Engineer (PE) license is highly desirable.Relevant certifications in electrical engineering are an advantage.Fluent in Italian and proficient in English.Proven experience in designing, implementing, and maintaining electrical systems.Experience in managing electrical projects from concept to completion.Desirable proficiency in electrical design software (e.g., AutoCAD Electrical, ETAP).Strong understanding of electrical systems, components, and design principles.Knowledge of safety standards, codes, and regulations related to electrical engineering.Ability to interpret and create technical drawings and specifications.Knowledge of Italian and EU electrical safety regulations.Competencies in analytical thinking, problem solving, attention to detail, collaboration, communication, adaptability, initiative, safety & IntegrityThis position may require regular travel to several sites for inspections, maintenance, and troubleshooting.Ability to travel domestically and potentially internationally as needed.About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world.....Read more...
This is a structured 4-year apprenticeship resulting in a Level 3 Diploma in Advanced Manufacturing & Engineering. The first year will be spent at Midland Group Training Services (MGTS) in Coventry learning core practical and theoretical elements of the role. For the following years, apprentices will attend MGTS on a day release basis to complete the necessary educational requirements for the programme.
Engineer your future with Fine Lady Bakeries and you will gain:
Continued learning and development through a mixture of college study and on the job training with your own personal Fine Lady Bakeries mentor
A varied programme that involves, electrical, mechanical and maintenance engineering
Opportunity to study for a HNC in Engineering
A highly competitive salary that increases each year
Skills you’ll develop include:
Mechanical applications and solutions
Electrical wiring, testing and installation
Robotics
Pneumatic and hydraulic systems
Process Control Systems
Responsibilities and Duties will Include:
Work alongside a team of highly skilled Engineers to carry out preventive and corrective maintenance and to identify opportunities and implement solutions, to improve manufacturing efficiency, equipment reliability and product quality
Work safely, with regard for your duty of care to yourself and to others who may be affected by your work
Adhere to company policies and procedures at all times
Keep others informed of information that contributes to the performance of the team, department or company
Work with MGTS external assessor to produce workplace assessment training plans
Attend lectures, practicals and visits as per training provider learning Plan
Training:
Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence)
BTEC Level 3 Diploma in Advanced Manufacturing Engineering (Development Knowledge)
Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence)
Training Outcome:Fine Lady Bakeries aims to offer permanent roles to all successful apprentices at the end of their training agreement wherever possible and to supporting continuing professional development.Employer Description:For many years Fine Lady produced a wide range of bakery products from its ten acre site in Banbury, Oxfordshire. Due to continued growth across its customer base an additional purpose built bakery was opened during the latter part of 2010 in Manchester giving the business both additional capacity as well as a far greater geographical footing to serve its customers requirements. Fine Lady produces in excess of 3 million loaves of bread every week.
Fine Lady specialises in supplying own label bakery products to the leading supermarkets, wholesalers, as well as supplying bread to the sandwich manufacturing industry. The current range covers a wide variety of sliced breads including the traditional square sliced, the very soft taller tin loaves and batch breads. More recently Fine Lady has started to produce a range of bake off products including bloomers, tiger bloomers, farmhouse and split tin loaves. To complement the bread range Fine Lady also produces rolls of many shapes and sizes as well as teacakes and hot cross buns.
In a market place that has become heavily dominated by large branded businesses Fine Lady offers something different as it really focuses on own label products which enables its customer to create a real point of difference. Over the years Fine Lady has built a strong reputation for delivering great products with excellent service levels throughout the United Kingdom.Working Hours :Normally Monday to Friday, 08:30 - 17:30, although some weekend and night work may be required.
Night Work - Any night work will be in line with government legislation: https://www.gov.uk/night-working-hours/hours-and-limits
The first year of training will be at MGTS in Coventry. Monday - Thursday, 08:00 - 16:00. Friday, 08:00 - 12:00.Skills: Communication skills,Number skills,IT skills,Team working....Read more...
Maintenance Technician - Scunthorpe
Salary: £40,000 - £42,500 (inclusive of shift allowance)
Shifts:
Week 1: Mon-Wed Days (06:00-18:00)
Week 2: Mon-Tue Nights (18:00-06:00), Wed Off, Thu-Fri Days (06:00-18:00)
Week 3: Mon-Tue Off, Wed-Fri Nights (18:00-06:00)
Recruiter: Aqumen Recruitment
Contract: Full-Time, Permanent
Join the Engineering Team Driving Real Impact!
Aqumen Recruitment is delighted to be supporting our client, a leading manufacturing organisation in Scunthorpe, as they seek an experienced Maintenance Technician to join their dynamic engineering team.
This is a fantastic opportunity for a multiskilled engineer who thrives in a fast-paced production environment and enjoys taking ownership of both planned and reactive maintenance. If you're passionate about keeping machinery running smoothly-and solving problems before they escalate-this role is for you.
Main Purpose of the Role
As a Maintenance Technician, you'll work as part of a high-performing maintenance team, delivering general, routine, and unplanned maintenance across plant machinery, equipment, and facilities. The goal is simple: ensure rapid response, fast rectification, and reliable uptime.
Key Responsibilities
Maintenance & Engineering
Respond quickly to production breakdowns to minimise downtime.
Support production across a variety of injection moulding machines (60-2700 tonnes), performing repairs, diagnostics, and fault-finding.
Maintain, adjust, and set up laser cells, PU cells, assembly systems, and automation equipment.
Carry out planned service work and participate in weekend start-up/shutdown rotations.
Support installation work, site upgrades, and continuous improvement projects.
Conduct mandatory safety checks on allocated machinery.
Health & Safety
Maintain strict adherence to all company and site Health & Safety requirements.
Proactively identify and report potential H&S risks.
Follow environmental protection procedures.
Empowered to stop work immediately if a threat to life, health, or fire safety is identified.
Quality
Work in compliance with IATF quality standards.
Maintain excellent housekeeping during and after all tasks.
Identify and communicate needs for spare parts.
What We're Looking For
Essential Qualifications & Experience
City & Guilds 214 Mechanical Engineering, HNC/ONC, or NVQ Level 3 in Mechanical/Electrical Engineering (or equivalent).
Time-served apprenticeship in manufacturing/production engineering.
Strong mechanical, hydraulic, pneumatic, and electrical knowledge.
Ability to read diagrams, drawings, and technical documentation.
Experience working safely within an engineering environment.
Solid fault-finding and problem-solving capability.
Desirable
18th Edition Electrical Installations
Overhead crane licence
Experience with automation and assembly equipment
Knowledge of CI/Lean Engineering techniques
Familiarity with 6- and 3-axis robotics
Experience with plastic injection moulding machinery
Behaviours
Motivated and proactive, with a strong desire for self-development.
Able to operate effectively under pressure and meet tight timeframes.
Confident working independently or collaboratively as part of a team.
Why Join Our Client?
Competitive salary including shift allowance
Opportunity to work with advanced machinery and automation
Varied, hands-on, and fast-paced engin
....Read more...
