Quality Inspector - Medical Technology
Location: West Midlands, UK Sector: Medical Devices Type: Permanent, Full-time
Newton Colmore is representing an established medical device company based in the West Midlands, specialising in the development and manufacture of highly sophisticated medical technology. This organisation has built a strong reputation for delivering precision-engineered devices that meet the highest quality standards in healthcare.
Due to ongoing expansion and commitment to maintaining exceptional quality standards, they are seeking a dedicated Quality Control Inspector to join their production team.
The Role
This is an opportunity for a quality-focused professional to play a crucial role in ensuring that complex medical devices meet stringent quality and regulatory requirements. You will be responsible for both incoming inspection of supplier components and final inspection of manufactured products, working closely with the production team to maintain the highest standards.
Key Responsibilities
Quality Control & Inspection:
Perform detailed inspection and testing of highly complex medical technology components and finished products
Conduct incoming goods inspection of supplier-delivered components and materials
Run comprehensive quality control procedures using precision measurement equipment
Document inspection results and maintain detailed quality records
Identify non-conformances and work with production teams to implement corrective actions
Production Support:
Collaborate closely with the production team to ensure manufacturing processes meet quality standards
Provide real-time feedback on product quality during manufacturing operations
Support production troubleshooting activities when quality issues arise
Participate in quality improvement initiatives and process optimisation projects
Compliance & Documentation:
Ensure all inspection activities comply with medical device regulations and company quality systems
Maintain accurate inspection records and quality documentation
Support internal and external quality audits as required
Follow established standard operating procedures and work instructions
Essential Requirements
Experience in quality control/inspection within a manufacturing environment
Background in precision measurement and inspection techniques
Familiarity with complex mechanical or electronic products (medical devices experience preferred)
Strong attention to detail and methodical approach to work
Good communication skills for working with production teams
Basic understanding of quality management systems
Ability to read and interpret technical drawings and specifications
Desirable Qualifications
Previous experience in medical device manufacturing or other regulated industries
Knowledge of ISO 13485, 14971 or similar quality standards
Experience with CAPAs, NCRs, and SCARs.
Formal quality qualification (e.g., Quality Control certification)
Familiarity with inspection software and data recording systems
What's On Offer
Competitive salary and benefits package
Opportunity to work with life-saving medical technology
Comprehensive training and development opportunities, working closely with the head of the team.
Stable, growing company with strong market position
Cooperative working environment with supportive production teams
Career progression opportunities within quality and manufacturing functions
Next Steps
This is a confidential search being conducted on behalf of our client. For a discrete, confidential discussion about this opportunity, please contact:
Matt Lowdon Founder of Newton Colmore 0121 268 2240 / hello @ newtoncolmore . com
All applications will be treated in the strictest confidence. Due to the confidential nature of this search, only shortlisted candidates will be contacted with full company details.
We are committed to equal opportunities and welcome applications from all qualified candidates regardless of background.
....Read more...
Medical device manufacturer is looking for a Quality Control Laboratory Analyst.
Your responsibilities:
Inspection and analysis of packaging components, raw materials and dental products at all stages of manufacture, including production and packing.
Operation, care and maintenance of laboratory equipment
Carry out the calibration of laboratory equipment in accordance with local procedures.
Stock control and disposal of chemicals and reagents.
Purchasing of laboratory supplies
Training will be provided.
Key skills:
Science at A-level (preferably chemistry), or equivalent experience in a Quality role
Awareness of laboratory health and safety
A good understanding and awareness of GLP, GDP, GMP.
Previous experience working within a production and manufacturing environment with a Quality focus.....Read more...
Medical device manufacturer is looking for a Quality Control Laboratory Analyst.
Your responsibilities:
Inspection and analysis of packaging components, raw materials and dental products at all stages of manufacture, including production and packing.
Operation, care and maintenance of laboratory equipment
Carry out the calibration of laboratory equipment in accordance with local procedures.
Stock control and disposal of chemicals and reagents.
Purchasing of laboratory supplies
Training will be provided.
Key skills:
Science at A-level (preferably chemistry), or equivalent experience in a Quality role
Awareness of laboratory health and safety
A good understanding and awareness of GLP, GDP, GMP.
Previous experience working within a production and manufacturing environment with a Quality focus.....Read more...
Job Description:
Our client, a global investment management firm based in Edinburgh, is looking for a Controls Assurance Manager to join on an initial 6-month day rate contract.
The successful candidate will have a track record of successfully leading teams and projects, to establish a centralised control testing function.
Essential Skills/Experience:
Internal control framework – experience of testing internal controls, in particular design effectiveness and operating effectiveness, control quality, and high-quality evidencing standards
Global approach – although the primary focus will be UK, many processes and controls operate across the global business and therefore experience of operating across a global business is desirable.
Interpersonal skills - deliver with quality and impact in a proactive and collaborative manner
Impact and influence - operates with intellectual curiosity to understand and surface insights that helps strengthen the design and operation of the internal control framework
Collaboration - outcome focussed with ability to facilitate collaborative working within and across teams
Communication - ability to communicate effectively with the team, and within stakeholder meetings
Attention to detail – works with precision to deliver requirements
Core Responsibilities:
Reviewing testing of the design and operating effectiveness of controls; and managing reporting of results with key stakeholders into the business.
Overseeing a team of control testers to deliver high-quality testing across the company control environment.
Working collegiately with the wider assurance team, providing training and best practice guidance, supporting overall team activities, supporting deliverables, and assisting with other risk and control related activities as required.
Where controls are identified as ineffective or require improvement, work collaboratively with business leads to agree testing results.
Core-Asset Consulting is an equal opportunities recruiter and we welcome applications from everyone irrespective of age, disability, gender, gender identity or expression, race, colour, ethnic or national origin, sexual orientation, religion or belief, marital/civil partner status or pregnancy.
Job reference: 16117
To apply for this vacancy applicants must be eligible to work in the UK in accordance with the Immigration, Asylum and Nationality Act 2006.
At Core-Asset, we’re committed to protecting and respecting your privacy. Our privacy statement explains when and why we collect personal information about people who engage with our services, how we use it, the conditions under which we may disclose it to others, and how we keep it secure. We may change this policy from time to time, so please check this policy occasionally to ensure that you’re happy with any changes.
By engaging with us (either by applying for a job we’re advertising, registering through our website, or getting in touch with our business) you’re agreeing to be bound by this policy.
Core-Asset Consulting is committed to protecting the privacy of our candidates, clients and website users. For further information, please refer to our full Privacy Statement available on our website http://www.core-asset.co.uk/about-core-asset/privacy-statement
Core-Asset Consulting offers specialist recruitment services to asset management, accounting & finance, asset servicing, legal and the wider financial services sector in Scotland.
INDCAS....Read more...
🔐 Access Control Engineer 📍 Locations: Greenwich-based, covering 3 local sites across London & the South East💷 Salary: £48,000 – £56,000 per annum (DOE)🚐 Vehicle: Must have access to own van; travel expenses paid⏰ Overtime: Available and compensated accordingly📄 Recruiter: CBW Recruitment (for a leading FM provider in MEP & Public Health services) 🏢 About the Client Our client is a top-tier Facilities Management company with deep expertise in Mechanical, Electrical, and Public Health services. They offer full-spectrum fire safety, access control, and MEP solutions across sectors like commercial, residential, industrial, hospitality, and education. 🚧 Role Overview Join as the on-site Access Control Engineer managing three local installations near Greenwich. Focused on service, repair, installation, and planned maintenance of access control and door-entry systems, you'll deliver professional, punctual and high-quality support while ensuring compliance and client satisfaction. ✅ Key ResponsibilitiesInstall, service, maintain, and troubleshoot access control & door-entry systems across three local sitesExecute planned preventative maintenance and reactive call-outs (including fault-finding and repairs)Conduct system testing and compliance checks to current British StandardsMaintain clear, accurate service reports, records, and compliance documentationManage client relationships during on-site visits, delivering high customer serviceDrive to site using your own van; travel expenses reimbursedComplete overtime work as needed, with overtime pay🎓 Essential RequirementsProven experience (min. 2–3 years) with access control, door-entry, intercom systems in FM or commercial contexts Relevant qualifications: NVQ/City & Guilds/equivalent in Access Control, Electrotechnical, or Security Systems (BAFE/FIA desirable)Full, clean UK driving licence and own van (essential)Valid CSCS/CPCS card; training in Emergency Lighting, First Aid, Asbestos Awareness is advantageousStrong fault-finding skills and understanding of wiring, controllers, POE, etc. Excellent communication, time-management, and customer service capabilities🌟 What’s on OfferCompetitive salary: £48k–£56k, tailored to experienceOwn vehicle usage with full expense supportPermanent role with clear progression paths to Senior Engineer or Team LeadFocused scope on 3 local sites—no excessive travelSupportive FM environment with diverse MEP exposurePaid overtime and flexible scheduling📩 Apply Now If you’re an experienced Access Control Engineer with your own van and a passion for delivering quality FM service, CBW Recruitment want to hear from you. Send your CV today to take the next step in your career.....Read more...
JOB DESCRIPTION
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints.
Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations.
Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems.
Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances.
Prepare and maintain production reports or personnel records.
Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality.
Initiate or coordinate inventory or cost control programs.
Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9.5 paid holidays and two floating holidays per year. You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
Document Management: Help organise and maintain both physical and electronic documents for key projects.
Document Control Systems: Assist with updating and managing document control software and databases.
Collaboration: Work closely with internal teams to ensure documents are submitted, reviewed, and updated promptly.
Quality Assurance: Support the proofreading and checking of documents to meet quality standards.
Administrative Support: Provide general administrative assistance to the team, including report creation and meeting coordination.
Training Outcome:This apprenticeship offers excellent development opportunities. Upon successful completion, you may progress into roles such as Office Manager, Executive Assistant, Project Coordinator, or Team Leader. You’ll also have the chance to specialise in areas like HR, finance, marketing, or procurement. Further training options, including Level 4 and degree-level apprenticeships, may be available to support your continued career growth.Employer Description:WE ARE SPECIALISTS
A leading independent versatile and experienced construction business,
providing specialist solutions for Civil Engineering, Demolition,
Remediation, Groundworks and RC Frames across the UK.
We are trusted to deliver residential and commercial civil engineering and groundworks projects, concrete substructures and superstructures to the highest quality standards, on time and to budget, no matter how technically demanding or logistically complicated.Working Hours :Monday - Friday, 8.00am to 5.00pm.Skills: Communication skills,Attention to detail,Administrative skills,Team working....Read more...
Holt Engineering is proud to be exclusively partnered with a leading UK defence company, situated in the heart of the stunning Dorset coastline in Poole.
Known for innovation, precision, and delivering excellence to some of the worlds most demanding engineering sectors, this is your opportunity to join a company that truly values quality.
We are currently seeking a highly skilled Electrical Quality Control Inspector to strengthen the quality team and uphold the companys industry-leading standards in aerospace and defence technology.
Your Mission As an Electrical QC Inspector, you will play a vital role in ensuring that electrical assemblies, cable looms, and piece parts meet all required specifications, standards, and workmanship expectations. You'll work hands-on within production, identifying and logging non-conformances, and collaborating across departments to deliver Right First Time results.
Key Responsibilities of an Electrical QC:
- Inspect electrical assemblies and components against IPC 610/620 standards (preferably certified to trainer level)
- Conduct line and roving inspections, raising and recording any non-conformances
- Validate wiring and component layouts using technical drawings, schematics, and wiring schedules
- Assist in root cause investigations and support continuous improvement activities
- Maintain meticulous inspection records via internal MRP and quality systems
- Actively contribute to production and QA meetings
- Support manufacturing with pre-closure checks to ensure top-tier output quality
What You Bring as a Electrical QC:
- Minimum 2 years experience in electrical quality control within aerospace or defence
- IPC-A-610 and IPC/WHMA-A-620 expertise (Trainer certification highly desirable)
- Skilled in interpreting complex wiring diagrams, drawings, and specs
- Comfortable using Microsoft Office and MRP systems
- Strong communicator, confident working both independently and as part of a team
- Calm under pressure, detail-focused, and solutions-driven
- A professional and proactive mindset with a passion for quality
Why Join?
- Work for a globally respected defence organisation
- Stunning Poole location work minutes from the Jurassic Coast
- Excellent salary and benefits package
- Supportive, quality-focused culture
- Be part of a team that makes a difference on a global scale
Interested?
For more information or to apply, contact Ian at Holt Engineering on 07734 406996 or email your CV today.
Your next opportunity in the defence industry starts here.....Read more...
Service Engineer – Smoke Control Systems 📍 London & Surrounding Areas💼 £35,000 – £42,000 (Depending on Experience)🕒 Full-Time, PermanentAgency: CBW Staffing Solutions CBW Staffing Solutions are currently working with a leading specialist in smoke control systems, proudly affiliated with the Smoke Control Association. Our client has extensive expertise across all systems on the market and takes pride in delivering bespoke, reliable, and cost-effective smoke control solutions. Due to ongoing growth, they are now looking to hire an experienced Service Engineer to join their team, primarily covering London and surrounding areas. 🔧 Role Overview As a Service Engineer, you’ll play a key role in installing, maintaining, and servicing smoke control systems in commercial and residential buildings. You'll be part of a technical team known for its high standards, professionalism, and safety focus. RequirementsLevel 3 Electrical Qualification (essential)Strong electrical diagnostic and repair skillsPrevious experience with smoke control, fire safety, or ventilation systems (preferred)Comfortable working independently and as part of a wider teamGood communication and reporting skillsWillingness to travel when required (majority of work is in and around London) What’s On OfferSalary: £35,000 – £42,000 (depending on experience)28 days holiday + bank holidaysCompany pension schemeHealthcare plan (post-probation)All power and test tools providedLong-term progression opportunities within a growing businessIf you're a skilled electrical engineer looking to take the next step in your career with a company that values quality and innovation, this could be the perfect fit for you. 📩 Apply now or contact CBW Staffing Solutions for more information.....Read more...
Lead Construction Manager position for a prestigious commercial development in Oxford's city centre. As the primary on-site authority, you'll oversee all aspects of this time-critical project from mobilisation through to completion. Location: Oxford City Centre (March - October 2024) Project Planning and Coordination:Monitoring programmes, including timelines, milestones, and resource allocationCoordinate with architects, engineers, and the client team to ensure project requirements are metEnsure project delivery within the critical March-October timelineDirect day to day site operations and contractor coordinationCommercial Management:Working closely with the project quantity surveyorBeing aware of commercial constraints throughout the project lifecycle, but not letting it compromise quality and safetyOversee cost control and value engineering initiativesManage project variations and change ordersTeam Leadership and Management:Lead and motivate the team including supply chainChair meetings as necessary, ensuring concise minutes are recordedProvide clear direction and guidance to team members to ensure project objectives are metFoster a collaborative and positive work environment conducive to productivity and safetyChampion the company ethos on best use of tech products availableAct as the primary point of contact for all site-related matters Quality Control and Compliance:Familiarity with design management principles and tools for coordinating the design process, collaborating with architects and engineers, and ensuring design intent is achievedImplement and enforce quality control measures to ensure work meets regulatory standards and client expectationsConduct regular inspections and audits to identify and address any quality issues promptlyWorking with our HSE Manager to ensure compliance with health and safety regulations and company policies at all timesEnsure a relentless focus on Zero HarmMaintain compliance with city centre construction regulationsRisk Management:Identify potential risks and develop mitigation strategies to minimize project disruptionsProactively address any issues that may arise during the construction processMaintain comprehensive documentation of project activities and decisionsManage site logistics within busy city centre environmentReportingAid with upstream reports. Leading on certain projects, aiding on others. To be agreed with line managerEnsure that the internal team are aware of site progress, issues/requirementsProvide regular updates on project milestones and key deliverables....Read more...
• Supervision of specialist contractors• The control of health and safety standards on construction projects• Recording, control and reporting of progress on a construction project• The minimisation of the environmental impact of construction projects• Control of quality of works on a construction project• Assisting commercial staff with the monitoring of costs on a construction projectTraining:
Level 4 Construction Site Supervisor (Duration 36 months + End Point Assessment Period)
Training Outcome:
Once qualified and experienced, it would be expected that the candidate would progress onto the next apprenticeship in their chosen field
Employer Description:EN:Able Futures, award-winning Shared/Flexi Job apprenticeship service will support you through your apprenticeship journey and professional development. We employ our apprentices directly and are listed on the Flexi Job Apprenticeship Register. We work with hosts in Yorkshire and the North East to provide apprentices in the construction and civil engineering industry.Working Hours :Monday to Friday
07:30 - 16:30
(15:30 finish on a Friday)Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
• Supervision of specialist contractors• The control of health and safety standards on construction projects• Recording, control and reporting of progress on a construction project• The minimisation of the environmental impact of construction projects• Control of quality of works on a construction project• Assisting commercial staff with the monitoring of costs on a construction projectTraining:
Level 4 Construction Site Supervisor (Duration 36 months + End Point Assessment Period)
Training Outcome:
Once qualified and experienced, it would be expected that the candidate would progress onto the next apprenticeship in their chosen field
Employer Description:EN:Able Futures, award-winning Shared/Flexi Job apprenticeship service will support you through your apprenticeship journey and professional development. We employ our apprentices directly and are listed on the Flexi Job Apprenticeship Register. We work with hosts in Yorkshire and the North East to provide apprentices in the construction and civil engineering industry.Working Hours :Monday to Friday
07:30- 16:30
(15:30 finish on a Friday)Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
Job Title: Production ControllerLocation: High Wycombe Department: Manufacturing Industry: Aerospace and DefenceJob Summary:The Production Controller ensures that all aspects of the production process are controlled and managed to meet the high standards required by the aerospace and defence sector. This role focuses on managing and optimizing workflow, inventory levels, and production schedules while closely coordinating with procurement, quality, and manufacturing teams. The Production Controller will monitor the execution of production orders, track work progress, and ensure that all products meet the company's quality, cost, and delivery targets.
Key Responsibilities:•Monitor production orders and ensure that they are executed on time and within budget.•Coordinate with procurement and supply chain teams to ensure material availability aligns with production needs, avoiding delays or shortages.•Track inventory levels to prevent overstock or stockouts and maintain optimal levels of raw materials, components, and finished goods.•Update production plans in real-time to reflect changes in schedules, priorities, or resource availability.•Ensure production documentation is accurate and up to date, including work orders, material requisitions, and production reports.•Identify bottlenecks or disruptions in production and work with relevant teams to resolve these issues promptly.•Communicate production status updates and potential issues to senior management, providing recommendations for resolving delays.•Work closely with quality assurance teams to ensure compliance with internal and external standards, certifications, and customer requirements.•Support continuous improvement of production control processes by analysing data and implementing process improvements. Liaise with Design team about potential improvements.•Ensure compliance with safety, quality, and regulatory standards within the aerospace and defence industry.Key Qualifications:•Experience in production control or manufacturing operations, preferably in aerospace and defence.•Strong understanding of MRP/ERP systems and production control software.•Strong problem-solving skills with the ability to resolve production challenges quickly.•Strong communication and interpersonal skills to work across departments.•Strong analytical abilities and attention to detail.•Understanding of production workflows and materials management within high-precision manufacturing environments.•Strong knowledge of ISO 9001 standards and their application in production planning.•Ability to manage multiple projects simultaneously and prioritize based on urgency and business needsThis position requires candidates who are proactive, adaptable, and capable of meeting the rigorous demands of aerospace and defence manufacturing. This role is integral to ensuring efficient, compliant, and on-time delivery of critical products.....Read more...
We are offering an advanced apprenticeship for a Technical Support Technician Level 3 with a keen focus on operations and process performance. You will spend time on site with the quality team, and you will also spend time at college, where you can meet other apprentices and learn more about the technical aspects of engineering.
You will learn how to:
Provide technical support and expertise to include performance and continuous improvement of process equipment
Contribute to the business by identifying possible opportunities for improving working practices, processes and/or procedures
Understand how to identify that the data and documentation being used is current and up to date
Understand the procedure to be used for making changes to issued documentation
Understand the requirements of the customer (internal/external) and support using the appropriate tools, equipment and processes
Obtain, control and characterise materials used in a manufacturing environment by utilizing dimensional control techniques to be able to verify the material meets the customer specification
Implement quality control/assurance systems and procedures in a manufacturing environment
Check and calibrate control and test equipment used in an manufacturing environment
Training:Engineering Technician Level 3 Apprenticeship Standard:
Apprentices will be required to attend college at least x1 day per week either at Uxbridge, Harrow or Hayes Campus completing necessary mandatory training and units associated with the apprenticeship
The apprentice will be required to complete:
Work towards gaining a full Qualification
Employment Rights and Responsibilities
Skills, Knowledge, and Behaviours
Standard and End Point Assessment
Functional Skills in English, maths, and ICT (if required)
Other training will be provided by the employer as required to enable the fulfilment of the job role. Training Outcome:
Can lead to a position as a process lead, team leader, manager
Employer Description:A global leader in aluminium transformation, Constellium designs and manufactures innovative and high value-added aluminium products and components. From window frames to railcars, auto bodies and aircrafts, and from solar reflectors to perfume containers and beverage cans, aluminium products are used throughout daily life. Constellium serves a global customer base operating in markets as diverse as aerospace, automotive, construction, packaging, renewable energy and transportation.Working Hours :Monday - Friday, Shifts to be confirmedSkills: Communication skills,IT skills,Analytical skills,Logical,Team working....Read more...
Reporting to our workshop team leader/supervisor, you will join our manufacturing team to help ensure products are manufactured, wired, tested, installed and commissioned to meet or exceed client requirements and assist in the smooth running of the organisation.
The position will require the candidate to be actively involved with ensuring HEMCO keep ahead of the competition by looking at current processes, design and manufacturing techniques to ensure we deliver effective and efficient designs and control systems for our clients’ requirements.
This can be a challenging role due to client delivery deadlines as well as adhering to our strict quality standards and working within our ISO9001:2015 quality management system. We are looking for a person who has an inquiring, engineering mindset and has the ability to learn, be adaptable in their thinking as well as be able to look at our existing manufacturing processes and see where potential improvements or efficiencies can be made.
You will learn a range of skills to enable the following tasks / duties to be performed:
Assist in design, layouts, setting out various companies’ products, assemblies etc.
Wiring to the required levels of quality, BS & EN Standards etc.
Feedback information, ideas, corrections etc. to the engineering team
Suitably pack and assist in preparing equipment for dispatch etc.
Assisting in maintaining required levels of stock (Cable, terminals, consumables etc.)
Attending site / clients’ premises to install / commission equipment or components
To book into the company – goods, components, equipment etc. as necessary
Perform all duties required as set out in Apprenticeship / SETA documentation
To accurately maintain training records for the duration of the apprenticeship
Feedback information, ideas, corrections etc. to the engineering team
To fill in as necessary - time sheets, test documentation etc.
Carrying out a variety of other / administrative tasks
Training:Our Apprentices will undertake an Apprenticeship programme.
Apprentices will undertake a Level 3 Apprenticeship Standard programme of Engineering Fitter. This will include a full-time period of practical workshop based ‘off-the-job’ foundation training at SETA’s Apprenticeship Centre in Southampton.
You will also undertake a knowledge qualification (depending on your prior attainments) where you will be required to attend SETA one day a week over two academic years. After your initial training at SETA, you will be with your employer working on developing your skills in relation to your job role and Apprenticeship standard.
You will then undertake an end point assessment in three main parts, a project, a multi-choice theory test and a professional discussion. These assessments take place in the last six months of your apprenticeship. Training Outcome:We believe in Apprenticeships and actively encourage our apprentices to further their careers with additional learning, courses, qualifications, CPD etc, and we hope to nurture their potential and give them the opportunity to grow with the business and pride ourselves that no ceilings will limit their career at HEMCO. Employer Description:HEMCO Power & Control Systems Ltd has over 60 years of experience in designing, manufacturing, installing and commissioning bespoke electrical control systems for a range of process control, machinery and manufacturing applications.
We have an extensive understanding of electrical principles, logic, and motion products and specialise in all levels of design and manufacture, from simple systems to complete integrated control systems from inception to installation, including bespoke software.Working Hours :40 Hours a Week (7.00am - 4.00pm Mon-Thurs, 7.00am - 1.00pm Fri)Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
CNC Miller
CNC Miller Salary: £17-20ph
The Company
A well-established engineering company is looking for skilled professionals to join its growing team. With decades of experience, the firm specialises in precision machining, serving a diverse range of industries. Known for its commitment to quality and efficiency, the company operates from a modern facility with advanced manufacturing capabilities. Offering a collaborative and innovative work environment, this is a great opportunity for individuals passionate about precision engineering to be part of a reputable and forward-thinking organisation and looking for a Heidenhain CNC Miller to join them.
CNC Miller Overview:
A growing engineering company is seeking an experienced CNC Miller Programmer to join their late shift team. The role involves setting, operating and programming Heidenhain-controlled CNC machines, machining precision components to tight tolerances, and conducting in-process inspections. Ideal candidates will have CNC milling experience, strong quality control skills, and knowledge of engineering materials.
CNC Miller - Responsibilities:
- Set, operate and program Heidenhain-controlled CNC milling machines
- Read and interpret technical drawings
- Load materials and components, ensuring correct programme installation
- Machine components to precise tolerances
- Conduct in-process inspections, recording results accurately
- Report any issues to supervisors and maintain communication with the quality team
- Follow health and safety procedures and contribute to a safe working environment
- Adapt to additional duties as required
CNC Miller - Requirements:
- Experience in programming, setting and operating CNC milling machines (Turning experience is a bonus)
- Engineering apprenticeship or Level 3 NVQ/City & Guilds qualification (preferred)
- Ability to produce precision components to tight tolerances
- Confident in using Heidenhain-controlled machines
- Experience machining high-strength alloys, heat-treated cobalt, and ferrous materials
- Understanding of conversational machining, basic measurement, and quality control principles
- Excellent attention to detail with a strong understanding of machining principles and tight tolerance requirements.
- Ability to troubleshoot and resolve issues quickly and effectively.
- Strong communication skills and the ability to work well in a team.
CNC Miller Salary & Benefits:
- £17-20ph
- Overtime.
- Late shifts.
How to Apply for the CNC Miller Role
Apply now, or for more information on the CNC Miller position, call or message Hayden at Holt Engineering on 07955 081 482.....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Operates industrial blenders in accordance with established production schedules.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment. Reads and follows work orders and formulas to meet production specifications and schedules. Examines materials, ingredients, or product per quality standards. Weighs or measures materials, ingredients, and products per requirements. Adds and mixes raw materials according to specifications. Transfers materials, supplies, and products between work areas. Discharges blenders of powder when necessary. Ensures quality and conformity of blended products to meet standards. Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs. Completes cleaning logs and notifies quality control for hygiene testing. Records operational and production data on specified forms/production documents. Reports malfunctions to a supervisor and confirms proactive and routine maintenance. Conducts on-going assessment of quality control and operational procedures. Meets and/or exceed production goals and guidelines for daily/weekly production runs. Observes plant safety rules and regulations at all times, reports all safety hazards in a timely manner. Other duties as assigned.
EDUCATION REQUIREMENT: No formal educational required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility. Completes and maintains all required training. Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
A fantastic new job opportunity has arisen for a committed Credit Control Assistant to work in a Head Office for one of UK’s leading healthcare providers based in the Derby area. This is one of UK’s renowned healthcare organisation providing high-quality care and support services that enrich the lives of older people
**To be considered for this position you must have experience in a similar role, working in the charity sector or social housing sector**
As the Credit Control Assistant your key responsibilities include:
Reduce outstanding debt for a portfolio of accounts by following up on overdue payments and implementing the appropriate collection strategy
Support the Accounts Receivable Team with query management relating to the project
Collation of data from multiple sources to support the Credit Control collection process
Work the credit control inbox to ensure that all questions and queries are resolved in a timely manner
Additional administration as identified and necessary
The following skills and experience would be preferred and beneficial for the role:
Pro-active in their approach to assigned workload
Previous experience of handling high volume complex queries and reconciliation within a finance environment
Excellent attention to detail
Intermediate excel skills are highly desirable
The successful Credit Control Assistant will receive an excellent salary of £25,300 per annum. This exciting position is Fixed Term Contract for 6 months working 37 hours a week. This great role offers the flexibility of remote working with 2 mandatory office days. In return for your hard work and commitment you will receive the following generous benefits:
Pension
20 days holiday (exc. bank holidays) - (Holiday entitlement depends on number of hours worked (pro rata basis of a full-time entitlement)
Life Assurance
Discount Scheme
Free Parking + much more!!
Reference ID: 7019
To apply for this fantastic job role, please call on 0121 638 0567 or send your CV ....Read more...
Quality Engineer
Engineering Manufacturing Industry
CMM experience essential
Coventry CV3
Up to £38k per annum
Early finish Friday, Holiday and Pension
Are you an experienced Quality Engineer or Quality Inspector with CMM experience and a background in engineering manufacturing who is looking to join an established engineering business with an enviable reputation within their industry? If yes, read on .
My established client specialises in manufacturing components for the automotive industry. They are currently looking for a new Quality Engineer to join their small but established quality team. Commutable from Nuneaton, Warwick, Rugby, Leamington Spa and Hinckley.
This is a hands-on position, mainly related to inspection, where flexibility and a desire to constantly improve are the most relevant soft skills to assure a systematic company improvement. The role requires a strong cross functional relationship to communicate key issues effectively on a regular basis to all staff, customers and suppliers.
Duties Include - Quality Engineer
- Working as part of the Quality Inspection team to ensure quality process controls are properly engineered, based on ISO:9001 rules, on Customer Specific Requirements, on the feasibility analysis and PFMEA results
- Collaborate with production and design teams to promote customer satisfaction across all employees on site
- Managing the Quality Management System
- CMM Programming, Online and Offline (Offline programming training can be provided)
- Monitor and report Quality KPIs
- PPAP's and APQP's (training can be provided)
- Respond proactively to customer complaints and questionnaires, resolving them in a timely manner and reporting on outcomes
- Work closely with the Design Team to resolve any production-related build issues
- Maintain and improve existing Quality Systems
- Conduct internal and supplier audits as needed
- Inspection under direct quality staff responsibility at all stages of production against the design specification are carry out
Key Skills / Experience Required - Quality Engineer
- Experience in quality control in the engineering manufacturing field, particularly on machined components
- Interpretation of mechanical drawings (ISO Standard)
- Knowledge of geometric dimensions and tolerances GD&T
- Ability to select and use basic measuring equipment, micrometres, calipers, protractors etc
- Ability to use standard gauging including plug, gap, acceptance etc
- CMM basic program editing, probe qualification etc
- Ability to interpret and understand specific customer quality standards and requirements
- Comprehensive knowledge of IS0:9001
- Ability to provide Quality Assurance support on quality tools and best practices, in a fast-paced engineering environment (ISR - Initial Sample Reports, balloons drawings, control plans, 8d reports, Deviation and Concession Requests, AIMs Action in Manufacturing, etc.)
- Basic Metrology experience
- Experience carrying out internal audits as per the ISO9001 standard
- Competent problem-solving skills
- Excellent oral and written English and basic computer skills
The Package - Quality Inspector
- Starting salary of up to £38K per annum, depending on experience
- Day shifts, Monday to Friday including early finish Friday
- Enhanced Overtime Rates
- Pension and Enhanced Holiday Package
Interested? To apply for this Quality Inspection position, here are your two options:
1. "This is the job for me! When can I start?" - Call 0116 2545411 now and lets talk through your experience. Ask for Dan Henderson between 8.30am - 5.30pm.
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL....Read more...
Read and interpret task related information and data. For example, work instructions, SOPs, quality control documentation, Service Level Agreements, specifications, engineering representations, drawings, and graphical information, work instructions, and operation manuals
Plan work. Identify and organise resources to complete tasks
Identify hazards and control measures to mitigate risks
Comply with food safety regulations and procedures
Comply with health and safety regulations and procedures
Comply with environment and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources
Select, check the condition, and safely use maintenance tools and equipment. Store tools and equipment. Complete or arrange maintenance of tools and equipment including calibration where required
Follow standard operating procedures and quality procedures
Follow site isolation and lock off procedures (lockout, tagout) and re-instatement of equipment with system checks and handover
Apply mechanical and fluid power system maintenance practices and techniques. For example, check levels, parts wear, pressure, and sensors, grease and lubricate parts, replace, fit components, and calibrate equipment
Apply electrical and control maintenance practices and techniques including use of electrical testing equipment and instruments. For example, panel risk assessment, fixed wire installation testing, fault finding, thermographic surveys, and checking protection settings
Apply reliability engineering techniques to prevent or reduce the likelihood or frequency of failures. For example, condition monitoring, oil sampling, thermography, vibration analysis, and ultrasound
Install and configure instrumentation or process control systems.
Install and configure electrical systems. For example, add distribution boards to circuits, single and three phase motors (AC and DC)
Assemble, position and fix equipment or components. Complete commissioning checks
Disconnect and remove equipment or components. Complete storage measures to prevent deterioration
Read and interpret equipment performance data
Fabricate, drill, and join to produce basic parts, spares or components to measurement and tolerance specification
Apply down-hand (flat) TIG welding techniques: butt and tee
Apply mathematical techniques to solve engineering problems
Produce and amend electrical and mechanical engineering representations, drawings, and graphical information. For example, for new component parts or change in circuit diagram or panel
Apply fault-finding and problem-solving techniques for example, using PLC data to diagnose issues and locate faults on industrial network
Apply continuous improvement techniques to understand current performance; collect and record data. Devise suggestions for improvement
Restore the work area on completion of activity
Resolve or escalate issues
Use information technology. For example, for document creation, communication, and information management. Comply with GDPR. Comply with cyber security
Record work activity. For example, asset management records, work sheets, checklists, waste environmental records, and any business or legal reporting requirements
Communicate verbal and written. For example, with colleagues and stakeholders. Use engineering terminology where appropriate
Produce reports for example, equipment performance reports
Provide guidance or training to colleagues or stakeholders
Training Outcome:
We will discuss the opportunities available at interview
Employer Description:Dunbia is a leading food company specializing in the production of beef and lamb products. Founded in Moygashel, Co Tyrone, Dunbia has grown significantly and now operates globally1. They focus on creating high-quality, naturally flavorful food and serve various market sectors with a wide range of products
Dunbia is known for its commitment to quality, food safety, and sustainability. They have multiple locations across the UK and Ireland, including abattoirs, processing facilities, and retail packing sites.Working Hours :Monday to Friday with a start time of 7am if under the age of 18 and 6am if over the age of 18.
37.5 hours per week with 2x 30 minute breaks per day.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative....Read more...
An exciting opportunity has arisen for aRegistered Dental Nurseto join a well-established private dental practice known for delivering personalised, high-quality care in a calm and modern setting.
As a Registered Dental Nurse, you will be supporting dentists in delivering patient-centred care through treatment planning and chairside assistance. This part-time role offers salary range of £14 - £15 per hour and benefits.
You will be responsible for:
? Explaining treatment options and costs, ensuring patients are fully informed and comfortable with their choices.
? Coordinating appointments and managing the full patient journey from consultation to aftercare.
? Maintaining high standards of infection control and preparing equipment for all procedures.
? Accurately completing clinical records and ensuring compliance with all relevant protocols.
? Managing laboratory requests, stock control, and clinical supply orders within budget.
? Collaborating with reception to ensure smooth communication and patient record handling.
? Leading the dental care team to support efficient day-to-day operations and uphold quality standards.
What we are looking for:
? Previously worked as a Dental Nurse, Dental Receptionist, Dental Treatment Coordinator or in a similar role.
? At least 1 year of experience in dental nursing and / or 6 months in treatment coordinator role.
? GDC-registered Dental Nurse with recognised qualification.
? Strong communication and interpersonal skills.
? Organised, reliable, and able to manage time effectively in a busy practice
? Skilled in dental software and IT system.
? Fluent in spoken and written English
Apply now for this exceptional Dental Nurse opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will ....Read more...
EC& I Engineer required for a leading worldwide supplier to the Pharmaceutical, Healthcare, Biotech and Chemical markets. This organisation has experienced huge growth and subsequently is recruiting for a EC&I Engineer. This opportunity is based in HUDDERSFIELD, meaning the successful EC&I Engineer will be easily able to commute from surrounding areas including Bradford, Wakefield, Dewsbury and Leeds. Key Responsibilities of the EC&I Engineer will include;
Provide technical support for controls to the sales team to ensure we offer the correct solutions to customers and have the knowledge and ability to fulfil the work.
Ensure all control designs meet both company and statutory standards.
Coordinate the development and delivery of control designs and documentation to meet the agreed project program and quality standards.
Collaborate with project managers and mechanical design engineers to ensure their input and support contribute to a robust design
For the role of EC&I Engineer we are keen to receive applications from individuals who have.
Proven experience working within an engineering environment.
Experience as a Control Engineer, delivering electrical designs for bespoke machinery and producing electrical schematics.
Knowledge of PLC and HMI systems.
Understanding of electrical/control legislation and codes of practice.
Educated to HNC/HND or DipHE level in Electrical/Controls Engineering or an equivalent qualification.
Salary & Benefits for the EC&I Engineer
Salary £32,000 to £52,000 (DOE)
Up to 8% Company bonus scheme
Cash Plan for Dental and Optical
24 Days annual leave - Increases with length in service
Flexible working hours (38.75 per week)
To apply for the EC&I Engineer position, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Lewis Lynch at E3 Recruitment for more information.....Read more...
Catfoss Recruitment Ltd are currently in partnership with a well-established global market leader in Industrial Heat Solutions, dedicated to solving thermal energy problems with high quality solutions across a wide range of industries including food, chemical, metal, pharmaceutical, public sector and marine industries and they are looking to recruit an Electrical Design Engineer on a permanent basis.ELECTRICAL DESIGN ENGINEERGENERAL DESCRIPTIONReporting to the Technical & Quality Manager and assisting both the Technical & Quality Manager and the Production Works Supervisor you will take responsibility for progressing the electrical and associated mechanical side of contracts through Engineering and Works across all project phases.Working from our Hertfordshire offices, the Electrical Design Engineer will manage the electrical component of projects for equipment supply and turnkey installations, working with colleagues in Process Engineering and Service Divisions to bring projects to commercial and technical completion within contract requirements.Electrical Design Engineer - PRIMARY RESPONSIBILITIES• Assisting the Production Works Supervisor with progressing contracts through Engineering & Works using the company’s computer system and associated filing.• Communicating with cross functional project team members or departments and collaborate with suppliers and Group factories and Technical Departments as needed regarding product design and operation.• Progressing the electrical engineering of contracts including control circuit design, site wiring diagrams and associated documentation including compiling manuals.• Preparing & revising electrical and associated mechanical drawings including Circuit Diagrams and Panel Layout Drawings, and Site Wiring Diagrams.• Ensuring accurate information is gathered and presented to Contracts Engineers to ensure equipment compliance with design data within the framework of the Company’s Quality Procedures and to enable the procurement and manufacture of equipment to fulfil contractual requirements.• Preparing and updating Technical Service Department documents including standard manual sections, instrument (e.g., temperature controllers / inverters) setup and datasheets & Technical Services Communications producing product and component selection and use information to colleagues in Contracts and Service Departments.• Assisting commissioning and service engineers in office and over telephone with onsite technical and electrical queries and troubleshooting as and when necessary.Electrical Design Engineer - EXPERIENCE• We are looking for a practical Engineering Professional ideally with experience in the process and practicalities of system design within an ISO 9001 quality driven business.• Experience would preferably be from within electrical engineering services with specific reference to steam or high temperature process heating applications, but other backgrounds will be considered. High voltage systems experience would be advantageous.• Use of AutoCAD in preparing Electrical Circuit Diagrams / P+IDs / GA drawings. Proficiency and experience with a dedicated Circuit Design Application, e.g., EPLAN or SEE Electrical would be a benefit.• Proficiency with MS Office suite of applications including SharePoint.• A track record in working on medium sized technology orientated, multi-disciplinary projects.• Excellent organisational and multi-tasking ability.QUALIFICATIONS: • Ideally you will have practical engineering skills plus a formal qualification (HNC/HND or Degree) in ELECTRICAL ENGINEERING or a related field. Experience of working in a similar job role is ideal. Longer experience may be considered as an advantage over academic achievement.COMMUNICATION SKILLS• Strong written English and verbal communication skills.• The ability to work within a team environment and to communicate clearly and effectively at all levels within the Company structure and with our customers and suppliers.• Knowledge of a second European language would be advantageous but is not essential.Electrical Design Engineer previous suitable job titles: Electrical Engineer, Electrical Design Technician, Electrical Control Engineer, Control Design Engineer, EC&I Engineer, Controls Engineer, Design EngineerPlease apply ASAP....Read more...
Daily duties to include:
Lathe work on specialist fixings and small components
Milling work on specialist components
Computer Aided Design (CAD) to understand and create engineering drawings
Welding of mild steel components using the MAG process
Ashcroft Components are a ISO9000 company and therefore quality control and system management will be a key part of the role
Training:
Engineering Operative Level 2 Apprenticeship Standard
Delivered in PTP Training's Walsall centre (WS1 1SQ) one day per week
The course will last 2 years
Training Outcome:Opportunity to progress and be responsible for the manufacturing of components and part of the design and development team. Employer Description:Ashcroft Components was formed when a team of industry experts identified the need for a new and innovative way of supplying specialist components and fasteners.
There are many fastener distribution companies in the UK but at Ashcroft Components we dedicate 100% of our time, skill and passion sourcing, manufacturing and supplying complex components that are labour intensive. Allowing us to alleviate the strain on the resources of our clients, whether in engineering, purchasing, quality control or accounts departments.Working Hours :8:30am - 4:15pm, Monday to Thursday (45 minute breaks per day (15 minute morning break at 10:30 am & 30 minute lunch break at 1:00pm).
8:30am - 12.45pm, Friday (15 minute morning break).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
£30,000 + 5% Bonus + 6% Pension + Income Protection + Life AssuranceAre you a reliable and detail-oriented Warehouse Operative looking to join an innovative and forward-thinking business at the forefront of medical device manufacturing?A pioneering designer and manufacturer of high-quality, cutting-edge medical equipment is seeking a Warehouse Operative to support daily operations across three busy warehouse departments. Based in Sunbury, this is a fantastic opportunity to join a growing business that partners with leading medical researchers and clinicians to deliver advanced solutions for some of today’s most challenging healthcare problems.Working across goods in, storage, dispatch, and stock control, the successful Warehouse Operative will play a hands-on role in ensuring goods are received, processed, stored, and dispatched with the highest levels of accuracy and efficiency.Key Responsibilities:
Unloading deliveries, checking items against purchase orders, and booking goods into the system
Labelling products and placing them in the correct storage locations
Picking, packing, and preparing orders for timely shipment
Carrying out quality control checks and reporting any discrepancies or damage
Assisting with inventory management and routine stock checks
Maintaining a clean, safe, and organised working environment
Supporting the wider warehouse team to meet operational targets
Skills & Experience Required:
Previous experience in a warehouse or logistics environment preferred
Strong attention to detail and excellent organisational skills
Able to work under pressure and meet tight deadlines
Proficiency with warehouse systems and Microsoft Office
Physically capable of lifting and moving heavy items
A positive, team-oriented attitude and good communication skills
This is a brilliant opportunity for a motivated and dependable Warehouse Operative to join a dynamic business with a reputation for innovation and quality. If you're looking for a stable, rewarding role in a supportive environment with genuine long-term prospects, this could be the perfect fit. Apply now!....Read more...
