Assess vehicle damage: Assist in examining and identifying damage to body panels and structural components, using measuring tools and diagnostic equipment.
Remove and repair damaged components: Learn to safely remove, repair, or replace damaged panels using approved methods, including panel beating, welding, and use of fillers.
Surface preparation: Prepare vehicle surfaces for refinishing by sanding, cleaning, masking, and priming, ensuring all surfaces are ready for paint application.
Refinishing and polishing: Support experienced technicians in applying paint and polish to restored areas, helping to achieve a high-quality finish that matches the original.
Tool and equipment handling: Gain experience using a wide range of specialist body repair tools and machinery while ensuring proper care and maintenance.
Workshop standards: Maintain a clean, organised, and safe working environment in line with health, safety, and environmental regulations.
Customer service awareness: Understand the importance of delivering work to a high standard to meet customer expectations and support business reputation.
Teamwork and communication: Work effectively alongside qualified technicians, supervisors, and training providers, developing your communication and teamwork skills.
Training and development: Attend off-the-job training with the designated training provider and complete all coursework, assessments, and practical tasks required to achieve your apprenticeship qualification.
Training:
Level 3 Accident Repair Technician Standard
A bespoke programme of technical and vocational training
Functional skills in Maths and English if applicable
Training Outcome:
Possible permanent contract upon successful completion of the Apprenticeship and further enhanced industry based training.
An apprenticeship allows you to earn a wage, gain valuable work experience and industry specific competence.
Transferable skills that are invaluable in the wider world of work.
Employer Description:CawMc Automotive is a specialist automotive restoration and fabrication company built on decades of hands-on experience and an enduring passion for classic vehicles. Our skilled team of craftsmen and engineers are dedicated to preserving and enhancing automotive heritage through expert restoration, bespoke fabrication, and high-quality bodyshop work.
At CawMc, we blend traditional techniques with modern precision to deliver projects of exceptional quality. Whether reviving an iconic classic or creating custom metalwork, we approach every job with authenticity, meticulous attention to detail, and pride in our workmanship.
We foster a collaborative and respectful working environment, where knowledge is shared, craftsmanship is valued, and a deep appreciation for automotive history is at the heart of everything we do. Joining CawMc means becoming part of a team that doesn't just repair vehicles—we restore legacies.Working Hours :Monday-Thursday 8am-4.30pm, Friday 8am-2pm (30 mins unpaid lunch break)Skills: Communication skills,Attention to detail,Customer care skills,Problem solving skills,Logical,Team working,Initiative,Patience....Read more...
We have an established apprenticeship programme that provides you with the opportunity to obtain a wide range of skills throughout the business, focusing on 3 and 5 axis CNC milling and CNC turning. Throughout your apprenticeship, you will experience and learn how to set and operate CNC machinery, create and edit CAD/CAM programs, accurately read and interpret drawings and customer requirements, and assess and accurately evaluate your own work. We have a total staff of around 35 employees, so you get to be part of the team.
Duties will include:
Setting and operating our CNC machines
Ensuring that all production requirements are maintained in line with daily plans
Monitoring and maximising machine outputs and reports
Ensuring all quality inspection checks are made throughout manufacture and in accordance with procedures
Ensuring all paperwork is accurately completed and filed in the relevant place
Always adhering to the Company’s hygiene and quality standards
Ensuring that the correct cleaning procedures are followed and recorded
Complying with all legal requirements in respect of Health & Safety of self and others
Demonstrating good employee relations within the team and with other departments
Working as part of a team, providing necessary support if required.Training:Machining Technician Level 3
Throughout your apprenticeship, you'll get:
Expert mentors/trainers who will guide you through your apprenticeship
Hands-on learning, which will give you real-world feedback
Modern facilities with ample access to tech equipment and resources, and much more!
Training Outcome:At the end of your apprenticeship, we aim to have a highly skilled and competent machinist who can join the company long-term.Employer Description:Established in 2009, Goodman Precision Engineering Ltd has grown from strength to strength, forging strong relationships with a wide and varied customer base. Built on the principles of delivering high-quality, precision components and assemblies with short lead times.
Our vastly experienced management have used their expertise and commitment to continuous improvement to ensure our facility remains an industry sector leader. Using the experience from our primary market in Formula One to compliment the service we now offer to a wide range of industry sectors, such as main stream motor sport, automotive, rail, gas & oil and more.
Our Milton Keynes base operates 24 hours per day, offering a comprehensive range of CNC machining and inspection services. Manufacturing components in wide range of metals and plastics. We are equally capable and happy to manufacture any requirement from one off component to large production run.
Working Hours :Shift Pattern: Monday - Friday, 08:00 - 16:30.Skills: Attention to detail,Analytical skills,Communication skills....Read more...
Work closely with mentors to learn laboratory techniques and protocols.
Verify all samples are representative prior to analysing and ensure all nonconformance is properly reported to the site teams.
Conduct laboratory analyses to ensure compliance with process, environmental and final product test schedules.
Interpret analytical results, investigating nonconformance whilst liaising with process teams to minimise impact to in-process and final packed pigment quality.
Carry out appropriate sampling in accordance with routine test schedules or to mitigate the impact of non-conforming product/material.
Maintain laboratory equipment, including inspection, calibration, troubleshooting and service.
Accurately record the outcomes of analyses to ensure accurate reporting and document management.
Maintain accurate filing systems and adhere to company procedures.
Manage stocks of chemicals and consumables.
Live and demonstrate behaviours that drive a positive values-based culture.
Training:
The Apprentice will follow the Laboratory Technician Apprenticeship Standard, which will combine practical, technical and behavioural training with theoretical knowledge of relevant science and technology over a period of 2 years.
The role is based at the Greatham site 4 days per week, with the Apprentice attending Hartlepool College of Further Education 1 day per week.
Training Outcome:
The role is part of our talent planning for the future and, subject to satisfactory completion of the Apprenticeship, candidates will be considered for any available permanent positions.
Employer Description:Venator is a leading global chemical company dedicated to the
development and manufacture of titanium dioxide pigments and
performance additives. We serve customers in more than 110
countries.
Our broad and versatile portfolio of leading pigments and
additives includes many well-known brand names and industry leading
products. Venator’s products are used as intelligent ingredients in thousands of everyday items including coatings, plastics, cosmetics, paper, pharmaceuticals, fibres, films, inks, catalysts, concrete, building
materials and in water purification.
Every day, around the world, you’ll find our pigments and additives
hard at work in a range of products including a small selection below:
Paint and coating formulations – delivering colour, gloss and better overall coverage
Clothes – boosting the strength and durability of man-made fibres
Cars – reducing nitrogen oxides from engine exhausts
Mobile devices – improving the performance of tiny ceramic components
Cosmetics and skin care products – adding opacity, colour, radiance, staying power and UV protection
Plastics – providing colour, heat-resistance and weather proofing attributes.
Inks – creating a consistent, high quality finish.Working Hours :On site, apprentices will work a 38-hour week, Monday to Friday, from 08:00 to 16:00.
Unpaid 30-minute lunch break.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
To provide a professional & personal first point of contact to customers for their IT support queries.
Provide 1st line IT support through numerous channels of communication including email, telephone, internal requests and automated alerts.
Troubleshooting issues and logging them into the company ticket system.
To ensure all support requests and incidents via any inbound channel are properly understood and recorded on Autotask.
Ensure the in-house operating systems are fully maintained in an accurate manner on all work received, updated or completed.
Escalate relevant and more complex work to the 2nd Line Helpdesk Technicians.
Undertake simple maintenance tasks for monitored systems.
To proactively contact and chase customers until a resolution has been achieved, or the issue is escalated.
Prepare Customer Hardware ready for use, such as building/configuring customer PCs, servers or printers.
Installing Software and building computers for customers.
Take on ad hoc project work as directed by the IT Helpdesk Manager.
Training:Why choose our Azure Cloud Support Specialist apprenticeship?
The new Microsoft Azure Cloud Support Specialist Level 3 programme has been designed in partnership with Microsoft to build Azure cloud capabilities in your organisation.
This new Microsoft apprenticeship is part of QA's drive to support Microsoft’s Get On 2021 campaign, a five-year initiative to help 1.5 million people build careers in technology and help 300,000 connect to tech job opportunities.
QA’s Azure Cloud Support Specialist Level 3 apprenticeship programme enables the apprentice to:
Learn on-premise and cloud-enabled technologies and services.
Learn technical content that aligns to and is relevant to employers and the market.
Gain an Azure Fundamentals Qualification and a Microsoft 365 fundamentals qualification.
Get an introduction to Windows, Linux and PowerShell.
Tools and technologies learned: Learners will learn to use Microsoft Azure, Microsoft 365, Windows 10, AWS, Linux, PowerShell.Training Outcome:On successful completion of your Apprenticeship, the company aims to offer you a full-time Helpdesk Technician role with Salary Increase and a clear Career Progression and Training Plan to progress you over the years into expert areas and/or management level IT. Employer Description:Everything Tech are an award-winning Managed IT Service Provider. They help Companies of all sizes do amazing things with Technology. They support over 4500 users across nearly every industry all over the Country and are a Microsoft Gold Partner specialising in Microsoft’s Modern Workplace shift in transforming businesses IT.Working Hours :Monday - Friday, between 8am - 5pm or 9am - 6pm.Skills: Communication skills,IT skills,Customer care skills....Read more...
CAD / CAM Technician
Job descriptionTo use CAD/CAM software to create models of master parts. Responsible for the manufacture of ‘Master Hobs’ which will provide the optimum punch tabletting face for the highest quality tablets and trouble-free production, according to customer requirements.
The successful candidate should have:• Use CAD/CAM software to create models and programmes of master parts for the manufacturing of tablet compression tooling.• To carry out the manufacture of parts, working from master tablet tooling designs and drawings.• To operate the die mould CNC milling machine.• To carry out inspection and visual validation using various measuring equipment and vision systems. Including but not limited to micrometres, Vernier callipers, bench clocks, contour tracers, shadow graphs and digital cameras.• To finish and polish fine detailed embossing and other features to a high accuracy, meeting manufacturing specifications.• To complete process checks and update schedules using various applications within Microsoft 360.• To support downstream engineering processes.• To support on other machining operations if required.
Preferred qualifications• Proven experience in manufacturing, ideally with similar industry experience.• Ability to interpret detailed instructions, engineering drawings, and technical reports.• A good understanding of measurement and Quality aspects.• Proactive approach to production line equipment, with the implementation of continuous improvements to drive better performance.• Preferred understanding of QRM or a similar environment of manufacturing lead times.• Team player, flexible with hours of work, excellent communicationskills.• Ability to contribute effectively as part of a larger team - essential.• Adaptable and willing to go the extra mile to meet tight operational deadlines.• Eagerness to learn and adaptive in approach.• Ability to work independently.
Hours of work: AM / PM Shifts 6 am-2 pm / 2 pm-10 pm Rotating plus occasional Saturday, paid as overtime ratePay: From £9.44 - £12.72 per hour plus 18% shift premium for this work pattern making it up to £15.01 per hour. Overtime is available in addition to salary but not guaranteed.
Job Type: Full-time
Pay: £22,590.00-£30,439.00 per year
Benefits:• Company pension• Cycle to work scheme• Employee discount• Free flu jabs• Free parking• Health & wellbeing programme• On-site parking• Store discount
Schedule:- Monday to Friday
Terms and Conditions of EmploymentPlease note that any offer of employment is contingent upon the following conditions: agreement to a Disclosure and Barring Service (DBS) check, References/Background & Right to Work Documentation checks. The Company may terminate employment without notice if any documentation is unsatisfactory.
Click 'Apply' to forward your CV.....Read more...
The role will involve learning all aspects of accounting techniques and principles whilst in due course helping business owners by producing accurate and timely management information.
To assist the bookkeeping team with the preparation of VAT return and bookkeeping
Operating individually and as part of a team to ensure service levels are achieved within the department
Input of data in preparation of accounts
Entering financial data onto internal systems with a high level of accuracy and speed
Working with various databases to extract and manipulate information
Produce reports as and when required
Answering the telephone in a professional and helpful manner
Typing correspondence by e-mail and letter
Administrative duties as and when required
Use Microsoft Packages in particular Xero, Word & Excel
Assisting all members of the team as and when required
Assist accountants with their duties
Booking in client records
Preparation of monthly bookkeeping
Preparation of VAT returns
The person will become an important part of the team over time
The above is not an exhaustive list of duties and you will be expected to perform different tasks as necessitated by the organisation which is relevant to your post within the company to meet the overall business objectives.
As part of your contract of employment completion of the Apprenticeship Training Programme forms part of your duties as well as helping your personal and professional development; the requirements to complete the programme are as follows:
Attend and be punctual for all timetabled induction, lessons and all work-based training/support sessions
Complete all required assignments by the required timeline
Build up your portfolio of evidence on-going during your apprenticeship programme
Access support from your tutor/assessor and your manager as and when required
Training:The Accounts/Finance Assistant is responsible for assisting the team of accountants with accounting duties. These can vary massively depending on the team structure and size of business.
An Accounts/Finance Assistant’s work could include basic bookkeeping activities, working with sales and purchase ledgers, running calculations to ensure that records and payments are correct, recording of cash and data entry.
Accounts/Finance Assistants can work in almost any sector. Potential employers include corporate businesses, sole traders, partnerships, Public Sector, not-for-profit organisations and educational institutions. Accounts/Finance Assistants may work inhouse for an organisation or they might work for accountancy firm, bookkeeping practice, Shared Service provider, self-employed or on behalf of several different clients.
Requirements:
All Accounts/Finance Assistants will demonstrate the following Knowledge, Skills and Behaviours.
Knowledge:
Accounting Systems & Processes
General Business
Understanding Your Organisation
Basic Accounting
Ethical Standards
Skills:
Attention to detail
Communication
Uses systems and processes
Personal effectiveness
Behaviour:
Personal Development
Teamwork
Customer focus
Professionalism
We will be delivering the industry recognised AAT (Association of Accounting Technician) Certificate in Accounting Level 2 as part of this apprenticeship standard. This qualification comprises four mandatory units:
Introduction to Bookkeeping
Principles of Bookkeeping Controls
Principles of Costing
The Business Environment
You will be required to attend Kirklees College, The Waterfront, Huddersfield one day per week throughout this apprenticeship programme.Training Outcome:
There is a possibility to gain a full-time role with us or advance your skills onto another apprenticeship
Employer Description:At Crowther Chartered Accountants, we’re committed to providing a friendly and honest service that is tailored individually to each client.
Our professional team of accountants is based in Huddersfield, West Yorkshire but we welcome new clients from all over the UK.Working Hours :Shifts to be confirmed. 30 minute lunch. Flexibility available.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills,Number skills,Analytical skills,Logical,Initiative,Excellent Attendance,Excellent Timekeeping....Read more...
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
This position performs diagnostic various onsite inspections for customers as well as other inspection services
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform/assist with diagnostic roof inspections, including Infrared, Nuclear, visual, & other inspection services, along with related information gathering and verification tasks. Work with Lead Diagnostics Technician Collaborate with other Field Supervisors as necessary. Assist with the Quality Control (QC) process of all diagnostic jobs, including the proper documentation, to ensure that all work was completed properly and that the customer was fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all diagnostic related matters. Serve as a contact for the office personnel if there are any problems concerning a diagnostic issue. Project a professional appearance and demeanor at all times while completing services for a customer. In conjunction with the Manager of Diagnostic Services, assist in the training of other field personnel on diagnostic tools, techniques, processes, etc. Proper completion of all services and related paperwork. Participate in all safety trainings and complete any required documentation. Perform any other duty and/or project as required or assigned by the Manager of Diagnostic Services or the VP of General Services
ADDITIONAL SKILLS AND QUALIFICATIONS:
Prior roofing inspection and diagnostic experience Prior roofing experience, including patch and repair skills Knowledge of Project Management, planning, and scheduling skills Knowledge and experience in monitoring and maintaining Quality Control Functional computer skills Prior safety training and complete a minimum of 10-hour OSHA certification Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Ability to work independently Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft.) and carry basic hand tools, equipment, and/or material up to approx. 75 lbs. over long distances Capable of walking along rooftop edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) The salary range for applicants in this position generally ranges between $60,000 and $68,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
A Mechanical Engineering apprenticeship at Liberty Pipes Hartlepool involves multi mechanical disciplines which range from mechanical fitting to mechanical maintenance, preventative maintenance to rapid response for breakdowns and site service support to being part of a specialised engineering team. The engineering function is very diverse, and apprentices will gain opportunities to visit the different areas and experience the function of the team in each particular area.
Tasks cover a wide range of disciplines and equipment including:Pneumatic and Hydraulic SystemsConveyance & pipe handling equipmentPumping and wash systemsAutomated cutting & milling equipmentOverhead Cranes & mobile plantUltrasonic and x-ray systemsGas fired furnaces
Universal Skills required are:Application of Lifting & Pressure system regulationsInspection and Plant Condition Monitoring (Plant Maintenance)Fault finding and diagnosisTesting and CalibrationsSlinging, Rigging & TransportationSmall fabrication skills, welding and burning
You will be responsible for maintaining the safety, reliability, quality & performance of the relevant equipment and using continuous improvement techniques in an effort to reduce costs and improve efficiency. You will work within the Liberty Pipes Hartlepool business, which produces large diameter pipes designed to meet the detailed and demanding requirements of some of the worlds most challenging markets and industries. This is a fantastic opportunity for someone who wants to study mechanical engineering in a practical and hands on environment.
Training:
The first year of training will be based at Hartlepool College of Further Education with placements during college vacations on employer's premises.
Following successful completion of the first year, apprentices will work on site with day release to HCFE as appropriate.
Training Outcome:
Apprentices who demonstrate consistent commitment, thoroughness and ability may have the opportunity for further training & qualifications (HNC & B.Eng). Possibility of future permanent employment, roles can progress through to technician, team leader, shift engineer, department manager, and a wide range of operational roles.
Employer Description:A member of the Liberty Steel UK group of companies. The Pipe Mills at Liberty Pipes Hartlepool are the UK’s largest steel pipe mills, manufacturing heavy duty steel pipe primarily for the energy and construction industries both in the UK and worldwide.
This is a very exciting time to join our team at Hartlepool Pipe mills as we embark upon our long-term strategy of extending our support of the new Energy Transition infrastructure within the UK.Working Hours :During the first year of training the following will apply:
5 days/week plus possible evening class.
9 am - 5 pm Mon to Thurs, and 9 am - 4.30 pm Fri.
Once on-site, apprentices may be required to work on a shift pattern and to work weekends.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Principal Responsibilities
1. To be part of a team of ICT professionals who provide and contribute to the effective and efficient delivery of all server, network and end-user hardware, software and associated services, from installation through to disposal.
2. As part of the team, help to ensure that service objectives are achieved in-line with agreed standards, project management methodologies, budgetary constraints and timescales.
3. To assist the Technical Design Architect, Technical Operations and Deployment Officer or Technical Operations and Procurement Officer in providing schools with effective ICT Support.
4. To ensure that all redundant equipment is identified and disposed of in an appropriate manner in-line with the disposal policy.
5. To work on small-scale ICT projects or assist with and making a contribution to large-scale/ major ICT projects with supervision and assistance.
6. To provide advice and guidance to schools on all server, network and end-user-related matters, including testing procedures with supervision and assistance.
7. To comply with agreed standards in the timely and effective use of the ICT Helpdesk system to aid in the smooth management of incidents and problems across the ICT service for the benefit of its customers.
8. To comply with security, change control and audit trail procedures for systems, software, licencing, integration and interfaces in accordance with information security policies and guidelines.
9. To respond to ICT problems within schools with guidance.
10. To support and maintain effective liaison with users, ensuring that a customer-focused approach is embedded in all activities.
11. To maintain the efficient operation and support of the school networks with guidance from senior team members.
12. Follow procedures for managing user and computer accounts in Active Directory / Open Directory / Office 365 and any other account stores.
13. Ensure servers in schools you are responsible for are backed up in accordance with One IT’s Offsite Backup Policy.
14. Ensure Anti-Virus software is configured and working on all devices in schools.
15. Encourage customers to keep hardware up to date with an emphasis on using business-class hardware from a list of approved vendors.
16. Deploy Apps from App Store and use MDM software with guidance as well as advise school on use of volume purchasing of apps.
17. Block and unblock websites where appropriate in Securly, according to e-safety with guidance from senior team members.
Desired Requirements:
• Full Driving Licence.
• Access to a motor vehicle on a daily basis.
Desired skills:
• Excellent communicator.
• Excellent telephone manner.
• Excellent team player by providing assistance and support to colleagues in IT-related matters.
• Ensure that a high level of customer service and support is provided to all internal and external customers.
Entry requirements:
The entry requirements are as follows:
3 GCSEs (or equivalent) at grades 4+ (A-C) in any subject.
GCSE Maths and English (or equivalents) at grades 3+ (D or above).
Prospective apprentices must not hold an existing qualification at the same or higher level as this apprenticeship is in a similar subject.
You may also have a combination of qualifications and experience which demonstrate the minimum foundation needed for the programme. In this instance, you could still be considered for the programme.Training:
ICT (Information Communications Technician) Level 3 Apprenticeship Standard.
You will also receive full training and support from the Just IT Apprenticeship team to increase your skills.
Your training will include gaining A Level 3 IT qualifications.
Training Outcome:Potential full-time role for the right candidate after apprenticeship completion.Employer Description:Welcome to One IT Services and Solutions! We aim to help schools streamline and consolidate all their IT services into one place to help them achieve outcomes and be successful through their use of technology in their everyday working lives.
Here at One IT, we pride ourselves on our excellent customer service and take a friendly yet professional approach to everything we do. One IT’s dedicated education team have over 20 years experience and we believe that healthy working relationships are key to maintaining and improving the quality of our services. We always aim to get to know our customers and provide a familiar voice at the end of the phone whenever they contact us for support, whether that’s for a general IT query, to book some training, or get help with their school MIS!
We will provide custom and bespoke solutions to fit your IT hardware and connectivity needs, MIS training and support which is simple to use, easy to implement and budget friendly. Our accredited services are used by over 100,000 pupils, staff members and parents / guardians in schools across the UK.Working Hours :Monday to Friday between 9am to 5pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
As an Electrician, you will study the uses of electricity and the equipment for power generation and distribution and the control of machines and communication systems. As an apprentice, you will learn how to work safely with electrical equipment, understand electrical drawings, install equipment to a professional standard and fault find and repair a range of electrical equipment. Electrical Engineering at Liberty Steel Hartlepool involves multi electrical disciplines which range from high to low voltage systems, preventative maintenance to rapid response for breakdowns and working site service support teams to being part of a specialised department engineering team.
Tasks cover a wide range of disciplines and equipment includingSafety Critical SystemsConveyance & pipe handling equipmentOver Head Cranes & mobile plantMotor Maintenance (AC & DC)Inverter drive systemsLow Voltage & High Voltage distributionDomestic and Industrial installationsAutomated cutting & milling equipmentSAW Welding equipmentPLC & PC Software
Universal skills required are:Application of IET RegulationsInspection and Plant Condition Monitoring (Plant Maintenance)Fault finding and diagnosisSlinging, Rigging & TransportationBench fitting and machining skills, drill, presses, lathe, grindingPneumatic and Hydraulic Systems
You will be responsible for maintaining the safety, reliability, quality & performance of the relevant equipment and using continuous improvement techniques in an effort to reduce costs & improve efficiency. You will work within the Liberty Pipe Hartlepool business, which produces large diameter pipes designed to meet the detailed and demanding requirements of some of the world’s most challenging markets and industries. This is a fantastic opportunity for someone who wants study electrical engineering in a practical and hands on environment.
Training:
The first year of training will be based at Hartlepool College of Further Education with placements during college vacations on employer's premises.
Following successful completion of the first year, apprentices will work on site with day release to HCFE as appropriate.
Training Outcome:
Apprentices who demonstrate consistent commitment, thoroughness and ability may have the opportunity for further training & qualifications (HNC & B.Eng). Possibility of future permanent employment, roles can progress through to technician, team leader, shift engineer, departmental manager and a wide range of operational roles.
Employer Description:A member of the Liberty Steel UK group of companies. The Pipe Mills at Liberty Pipes Hartlepool are the UK’s largest steel pipe mills, manufacturing heavy duty steel pipe primarily for the energy and construction industries both in the UK and worldwide.
This is a very exciting time to join our team at Hartlepool Pipe mills as we embark upon our long-term strategy of extending our support of the new Energy Transition infrastructure within the UK.Working Hours :During the first year of training the following attendance pattern will apply:
5 days/week plus possible evening class
9 am - 5 pm Mon to Thurs, 9 am - 4.30 pm Fri.
Once on site apprentices may be required to work on a shift pattern/weekends.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Produce CAD drawings in 2D and 3D, using Peps and Visi, for customers and the tooling factories. Create the CAM programs, using PEPS, for the UK factory to manufacture the tooling
Discuss customer requirements directly with them via telephone and email
Many customers will send us their part drawings to understand what they need to manufacture. Very often we will need to call the customer to clarify issues
Evaluate solutions and costs for customer enquiries
For punch tooling there is often more than one solution for the manufacturing of the product and also limitations as to what can be produced. Possible solutions need to be discussed with our customers explaining the cost / benefits
Discuss tooling technicalities and solutions with the factoryUnderstanding the manufacturing process that our factory
uses to make the tooling – discuss manufacturing issues with the factory staff
Discuss directly with overseas factories the UK customer tooling requirements
Discuss with the French and Japanese factories any technical issues and delivery problems that might occur
Produce technical quotations for the proposed solutions for customers
Complete tooling quotations including technical specification, drawings and pricing for our demanding customers
Learn the basic programming language for the Amada Turret Punch Press
Learn how to create simple programs, using machine programming language to run the Amada Turret Punch Presses
Produce samples and complete tests for punch tooling in the Amada showroom
Using basic programming skills test punch tools to prove concept or to understand issues that have been experienced
Produce samples of specific tools designs for customers to appreciate and understand the concept
Training:Formal training is delivered at HWGTA, HWGTA located in Worcester (WR4 9GN):
Years 1/2 is a combination of off the job training at HWGTA Training Centre as well as training on site with your employer. This includes 29-42 weeks within the training Centre plus 1 day per week in a classroom setting to cover practical and theory aspects and complete EAL Level 3 Diploma in Advanced Manufacturing Engineering - Development Knowledge
Years 3/4 based full-time in company developing skills in preparation for the end point assessment to gain your Engineering and Manufacturing Support Technician Level 3 qualification
You will receive monthly visits from your assigned Learning and Development Specialist, who will set you work, monitor your development and wellbeing, and discuss training sessions. They will also prepare you for your End Point Assessment
Additional training for functional skills in English and maths will be undertaken if needed
There is also a five-day teambuilding residential trip that is held in the spring of each year offered to all apprentices on programme
Training Outcome:
Excellent prospects and progression including the possibilities of training and overseas travel
Employer Description:Amada Group is an international market leading manufacturer, providing a complete solution of machines, tools, software, service, parts and finance for our customers.
Amada UK, based in Kidderminster has in excess of 16 years experience of employing apprentices.Working Hours :Monday - Friday, 08:30 - 17:00 including 1 - hour unpaid lunchSkills: Communication skills,Attention to detail,Team working,Strong work ethic,Flexible attitude,Smart and professional,Enthusiasm & Self-motivated....Read more...
This is an excellent opportunity to work as part of a highly skilled team that is committed to quality. You will train to become a qualified Vehicle Damage Panel Technician; the successful candidate can expect a high-quality training package with excellent career prospects. You will work independently and as part of a team following a defined process, using the skills to correctly identify the different body panel types and have the ability to use the correct repair tools to carry out the work to the highest possible standard.
You will receive training and support throughout your qualification the successful candidate will learn to remove, repair and replace vehicle body panels and components of the vehicle safely and efficiently, using a variety of body repair panel tools, equipment and devices. Duties to include:
Assessing a vehicle to establish the extent of damage
Based on the initial assessment, deciding whether to repair or replace bodywork
Removing damaged panels
Refitting new/repaired panels
Repairing damaged bodywork using traditional dolly and hammer or more modern techniques
Repairing small dents, holes or corroded areas using a compound filler
A certain amount of administration and customer interaction is also required:
Keeping a record of work carried out and time taken
Liaising with the customer or insurance company
Providing quotations and estimations
Training:The apprenticeship training is delivered via weekly block releases at S&B throughout a year, learning will also take place in the workplace and a S&B Development Coach and Workplace Mentor are allocated to support and monitor your progress to help you reach your goals and manage your workload. Your employer will pay you when you are attending weekly training blocks at S&B.Training Outcome:As a company we are committed to providing development and training opportunities to our employees.
This apprenticeship is the grounding for your future development and there are lots of opportunities to develop your career within our company.Employer Description:Welcome to H&J Commercials Ltd.
Commercial, bus and coach vehicle repair and refurbishment.
Our body, panel and paint shop facilities are based in Yate just north of Bristol, with excellent links to the M4 and M5 motorways into the M4 corridor, South West and Wales areas, making it easy for you to get to us. We can also offer a collection and delivery service.
H&J Commercials are a commercial vehicle body shop and paint shop, specialising in accident repair and refurbishment of all commercial vehicles -
trucks, trailers, bus, coaches and vans as well as caravan bodies.
Whether it is contract work for fleet vehicles or for the avid caravaner wanting their caravan kept in tip-top condition for the end of or start of the caravan season we are here to help.Working Hours :Monday to Friday, 08:00 - 17:00.
1 hour lunch break.Skills: IT skills,Organisation skills,Problem solving skills,Logical,Team working,Initiative....Read more...
Junior IT Support Analyst - Harlow, Essex - £30-33,000 per annum Are you looking to kickstart your IT career and join a leading company based in Harlow? CBW are recruiting for an established contractor that is seeking a motivated and ambitious IT Support Technician to join a growing team and provide first-class technical assistance across a range of systems and services. Brief Overview;Monday - Friday 8am - 5pm Permanent position Office based - hybrid after probation £30-33,000 per annum (DOE)Clear progression opportunities Role Overview; We are seeking a dynamic and detail-oriented individual eager to contribute to a wide range of tasks and systems. As part of the team, you will leverage your analytical mindset and problem-solving skills to enhance our business systems and processes. This role offers the opportunity to work across diverseprojects, collaborating with internal teams and external partners to drive operational efficiencies and deliver exceptional solutions. Key Responsibilities:Demonstrate a willingness to learn and adapt to various systems and tasks.Collaborate closely with the Head of Systems Development and external partners.Gather and analyse system performance data to drive informed decisions.Accurately translate project requirements into system developments and implementations.Manage both complex and simple projects within Alphatrack Systems and Group functions.Configure and develop business systems for internal and external customers using Tesseract and other tools.Optimize Tesseract and oversee stakeholder engagement to implement changes.Develop and deliver process mapping, system user guides, and training materials.Ensure the seamless day-to-day operation of Tesseract and its integration with other systems.Support administrative and operational teams with technical expertise.Streamline processes within Tesseract to enhance efficiencies.Provide IT analytical support and utilize tools like Google for investigative purposes OperationalOffer first-line technical support to end-users to identify IT issues via phone, email, or in person.Resolve issues in collaboration with other partners and stakeholders.Lead the implementation of new systems and applications.Drive process efficiency by streamlining workflows and optimizing system usage.Generate and interpret performance data to improve operational effectiveness.Maintain KPI reports, management dashboards, and performance metrics to support the Business Support team.Handle customer and internal staff requests with a high standard of customer service.Monitoring system performance and addressing any problems or issuesDocumenting procedures and issues for future referenceVersion 1.1 Testing and evaluating new and/or enhance existing technology for possible/planned implementationOrganisational skills to prioritise and manage multiple tasks and/or projects simultaneouslyAbility to work autonomously and as part of a team SystemsMS Office (Excel, Word) – RequiredTesseract – AdvantageousSQL – AdvantageousCompleat (Sage compatible) – AdvantageousStock Right Now – Advantageous IIS – AdvantageousSAP Crystal Reports – Advantageous Microsoft Applications: Visual Basic, MS Access, CRM Dynamics – AdvantageousProgramming & Integration: PHP, MySQL, JSON, API REST technologies – AdvantageousAI Technologies: Usage and implementation – AdvantageousIoT Platforms: Usage and implementation – AdvantageousQliksense (Business Analytics): Design and implementation – Advantageous....Read more...
Day-to-day responsibilities will include:
Perform tool setting, machine maintenance, machine loading, de-burring of components, loading CNC program of components, inspection of components and updating of system to achieve current status of workload.
To understand and interpret Engineering drawings, including GD&T, and to use a range of standard and special measuring equipment, as well as working closely with QC to achieve high ‘First off’ pass rates and to liaise with QC to resolve issues and eliminate repeat failures.
To have an understanding of cutting tool and component materials and their effect on productivity. The importance of correct tool selection, an understanding of cutting tool conditions including rigidity, speeds, feeds, lubrication and their application and effect. Also, to understand tool failure and to recognise causes and take appropriate action to rectify them.
To understand and apply safe and appropriate workholding methods and techniques to satisfy component requirements, including manual and automatic chucks, vices, direct clamping (to machine tables) and special jigs and fixtures.
Verify the conformity of parts, assemblies and sub-assemblies in line with engineering drawings, the quality management system and any special customer requirements.
Identify and report non-conformance as per the Company procedure.
Ensure compliance with Quality Assurance and Health Safety Environment policies and procedures.
Training:
The apprentice will be working towards the Level 3 Machining Technician Apprenticeship Standard.
Qualifications include: EAL Level 3 Diploma in Advanced Manufacturing and Engineering (Development Competence), EAL Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence) and EAL Level 3 Diploma in Machining (Development Knowledge).
This is a 4 year apprenticeship with college attendance required one day per week.
College attendance will be at our Colchester Institute - Braintree Campus.
Training Outcome:The expected career progression after this apprenticeship could include:
CNC Miller/Setter/Operator.
CNC Turner/Setter/Operator.
Highly skilled Miller/Turner.
Deputy Cell Leader.
Cell Leader.
Manufacturing Engineer.
Employer Description:With over 40 years’ experience, XCEL Aerospace is a leader in delivering manufacturing excellence within the global aerospace market. Our strong reputation as a world class supplier of manufactured aerospace components supports thousands of flight hours every year.
We support customers to reduce supply chain risk by providing high quality components and assembly parts, on time, in full and at competitive prices. We support our customers to perform and grow, and together we deliver excellence.
As a highly driven and motivated business, we understand and value the importance of trust and integrity when nurturing relationships with our customers. Our commitment to maintaining our knowledge-rich, excellence-focused culture is part of our goal to build long-term, mutually beneficial relationships with you. We drive high standards in service quality which elevates us above other key players in our industry.
We currently employ 54 team members at our site in Romford.Working Hours :Various shifts: Monday to Thursday 6am–3pm & Friday 6am–11am. OR Monday to Thursday 7am–4pm & Friday 7am–12pm. OR Monday to Thursday 8am–5pm & Friday 8am–1pm. With a 30 minute lunch break and an additional 15 minute break in the morning each day.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Duties and responsibilities during training:
• Compliance with all relevant Health and Safety and Legislative requirements• Learning all aspects of the business from production commencement to completion• General Machine operating / CNC Machine Operating / CNC Setter Operating/ CNC Programming• Operating and using the following equipment: measuring equipment, hand tools, grinding machines, turning machines, milling machines, CNC machines, ancillary machines, inspection requirements• Booking stock out of stores• Transferring stock to appropriate locations.• Picking stock from stores and recording part numbers.• Checking equipment looking for faults/damage and potential hazards• Filling out job sheets recording work carried out, parts used and condition of equipment.• General housekeeping duties• Ad-hoc duties as requested.• Undertake internal training as appropriate
Once trained you will be responsible for:
• Carrying out production operations• Monitoring and inspecting product and process characteristics within the scope of their activities, carrying out production first off inspections, quantity counts, recording the details and signing and dating the Inspection Check Sheets• Notifying Supervision following the detection of suspect or non-conforming products• Notifying Supervision following the completion of specified production activities, as applicable• Ensuring products are finished off safely and properly in line with good practice (e.g. removal of burrs, countersinking etc. as appropriate and transporting them to the next process Holding Area)• Carrying out relevant safety checks and maintenance on plant and equipment used, as applicable• The provision and maintenance of relevant Quality records• Completing work in a timely manner to the required quality/standardTraining:Together with invaluable commercial and practical experience, you’ll work towards several academic and vocational qualification levels throughout your time with us, which are fully paid for, including: ● Advanced Manufacturing Engineering Foundation Competence – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company● Advanced Manufacturing Engineering Development Competence - in years 2 to 4 in company● Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 2 & 3 on block release to Make UK● In house training in line with your requirements.● Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Engineering Technician.Training Outcome:The prospects of career advancement through the company is a goal that the company itself requires. Previous apprentices are now either supervisors or work in R&D.Employer Description:Who is Bailey and Mackey?
Wherever pressure needs to be measured, we can deliver a solution.
Bailey & Mackey is a well-established family owned business which is proud to have established a worldwide reputation for providing a high quality products which are reliable in service in the field of pressure measuring equipment. We have been manufacturing high quality instrumentation for over 70 years. The product range has been extended over the years and we now manufacture Pressure Switches, Pressure Gauges and Pressure Transducers all made in our factory in Birmingham.
Our core design enables our products to be easily adapted to meet specific customer requirements, this enables us to satisfy the requirements of a widely diverse industries including Fire Safety, HVAC (Heating & Ventilation), Medical, Waste Water, Chemical, Automotive and Food. We pride ourselves on suppling high quality and reliable products to almost all industries.Working Hours :At company: Mon - Thur 7.30am - 4.30pm, Fri 7.30am - 12.30pm
At Make UK: Mon - Thur 8am - 4.30pm, Fri 8am - 12.30pmSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Construction Management Associate is responsible for assisting the Construction Manager in all aspects associated with a construction-related project. This will include but is not limited to, General Contracting projects, larger-scale Contracting Patch and Repair Projects, TremCares, etc. This will involve working with the Construction Manager, Project Superintendent, or WTI Technician assigned to the project to ensure the project is effectively executed and completed safely and all contractual obligations are adhered to. Additional duties will include participating in onsite meetings, scope of work development, proposal review, specification review, completion of project schedules, assembling project submittals, obtaining building permits, project closeout documents, and other duties as directed by the Construction Manager.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for contributing to and validating proposals and specifications. Conceptual Phase (specification development, establishment of milestone dates) Program Planning Phase Design Phase Conduct Pre-Proposal Meetings Proposal Phase Construction Phase Conduct pre-construction Effective Close-out Cost Estimates and schedules Use of ebuilder for all project documentation per policy manual. Assist the Construction Manager in tracking project costs, budget variances, and profitability. Accountable for Quality Assurance. Ensure the subcontractor has submitted the required documents. Establish timelines and goals. Manage key metrics and report as required. Coordinate with Program Managers, Project Administrators, Project Estimators, Specification Writers, Sales Representatives, and RBM when needed. Assist in the review of submitted proposals and contractor interviews for specification and contractual compliance. Review of line-item generated proposal documents. Direct Project Superintendents as needed. Competencies: Adaptable, willing to change with business necessity Professional and lead by example Diversity awareness and ability to adjust to multiple personalities Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Excellent customer service skills and ability to build relationships Technical knowledge of all products and services that WTI offers Understanding of Construction Management tasks Superior written, oral, and digital communication skills Able to create performance reporting 24-hour reply response to all inquiries Ability to use and understand Microsoft Office and other software as required. Specification Development Stage: Works with the Construction Manager and Sales Representative to establish a scope of work for the project. Completion of specification requests and related documents. Responsible for specification review as required by the Construction Manager. Pre-Proposal Stage: Conducts Pre-Proposal Meeting and distributes completed Pre-Proposal Meeting documentation to all applicable parties. Assist the Construction Manager in reviewing proposals. Prepare Proposal Documents as directed by the Construction Manager. Pre-Construction Stage: Publish the Project Schedule. Assists Construction Manager in planning and coordinating the Pre-Construction Meeting. Engages with the Project Superintendent to provide necessary project information. Conducts Pre-Construction Meetings and distributes completed Pre-Construction Meeting documentation to all applicable parties. Obtain Building Permit when required. Construction Stage: Review Daily Inspection Forms and ensure they are distributed to all applicable parties and uploaded into project files. Visits job site as necessary or directed by the Construction Manager. Conduct weekly Progress Meetings, virtual or onsite, and distribute meeting minutes to all appliable parties. Maintain Project Schedule and update on a weekly basis. Perform site audits as appropriate. Review subcontractor payment requests with the Construction Manager. Assemble AIA billing applications for the Construction Manager's review and approval. Assist the Construction Manager, Project Superintendent, Subcontractor, Owner, or Sales Representative as needed. Close Out Stage: Assist the Construction Manager in coordinating the final inspection. Ensure all required documents are uploaded into the project files. Other Requirements: The ability to travel out of town, may include overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write, and speak English Open to relocation after completion of the program Apply for this ad Online!....Read more...
